powerpc/85xx: add nor flash partitions for mpc8569mds
Subsystems (2)
PATCH 1/1 powerpc/85xx: add nor flash partitions for mpc8569mds
Add 4 partitions in nor flash. Also fix nor flash
bank width bug.
--- arch/powerpc/boot/dts/mpc8569mds.dts | 24 +++++++++++++++++++++++- 1 files changed, 23 insertions(+), 1 deletions(-)
arch/powerpc/boot/dts/mpc8569mds.dts +23 -1
@@ -70,8 +70,30 @@ #size-cells = <1>; compatible = "cfi-flash"; reg = <0x0 0x0 0x02000000>; - bank-width = <2>; + bank-width = <1>; device-width = <1>; + partition@0 { + label = "ramdisk"; + reg = <0x00000000 0x01c00000>; + }; + partition@1c00000 { + label = "kernel"; + reg = <0x01c00000 0x002e0000>; + }; + partiton@1ee0000 { + label = "dtb"; + reg = <0x01ee0000 0x00020000>; + }; + partition@1f00000 { + label = "firmware"; + reg = <0x01f00000 0x00080000>; + read-only; + }; + partition@1f80000 { + label = "u-boot"; + reg = <0x01f80000 0x00080000>; + read-only; + }; }; bcsr@1,0 {
Signature · 1 line
1.6.0.4.771.gef3b3
Quoted 2 lines · Kevin Hao
Add 4 partitions in nor flash. Also fix nor flash
bank width bug.
Can you explain this.. I'm trying to understand why you set the bank-width to 1
- k
Quoted 45 lines
Signed-off-by Kevin Hao <[email protected]>---
arch/powerpc/boot/dts/mpc8569mds.dts| 24 +++++++++++++++++++++++-1 files changed, 23 insertions(+), 1 deletions(-)arch/powerpc/boot/dts/mpc8569mds.dts +23
-1@@ -70,8 +70,30 @@ #size-cells = <1>; compatible = "cfi-flash"; reg = <0x0 0x0 0x02000000>; - bank-width = <2>; + bank-width = <1>; device-width = <1>; + partition@0 { + label = "ramdisk"; + reg = <0x00000000 0x01c00000>; + }; + partition@1c00000 { + label = "kernel"; + reg = <0x01c00000 0x002e0000>; + }; + partiton@1ee0000 { + label = "dtb"; + reg = <0x01ee0000 0x00020000>; + }; + partition@1f00000 { + label = "firmware"; + reg = <0x01f00000 0x00080000>; + read-only; + }; + partition@1f80000 { + label = "u-boot"; + reg = <0x01f80000 0x00080000>; + read-only; + }; }; bcsr@1,0 {Signature · 1 line
1.6.0.4.771.gef3b3
Quoted 7 lines · Kumar Gala
Quoted 2 lines · Kevin Hao
Add 4 partitions in nor flash. Also fix nor flash
bank width bug.Can you explain this.. I'm trying to understand why you set the bank- width to 1
The NOR flash (S29GL256N) works in 8-bit mode. And it's also not interleaved. So the bank-width should be equal to device-width. If we set bank-width to 2 the flash can not work correctly.
Thanks,
Kevin
Quoted 50 lines
- k
Quoted 46 lines
Signed-off-by Kevin Hao <[email protected]>---
arch/powerpc/boot/dts/mpc8569mds.dts| 24 +++++++++++++++++++++++-1 files changed, 23 insertions(+), 1 deletions(-)arch/powerpc/ renamed from arch/powerpc/boot/dts/mpc8569mds.dts +0
-0
boot/dts/mpc8569mds.dts
index 39c2927..1f98990 100644arch/powerpc/boot/dts/mpc8569mds.dts +23
-1@@ -70,8 +70,30 @@ #size-cells = <1>; compatible = "cfi-flash"; reg = <0x0 0x0 0x02000000>; - bank-width = <2>; + bank-width = <1>; device-width = <1>; + partition@0 { + label = "ramdisk"; + reg = <0x00000000 0x01c00000>; + }; + partition@1c00000 { + label = "kernel"; + reg = <0x01c00000 0x002e0000>; + }; + partiton@1ee0000 { + label = "dtb"; + reg = <0x01ee0000 0x00020000>; + }; + partition@1f00000 { + label = "firmware"; + reg = <0x01f00000 0x00080000>; + read-only; + }; + partition@1f80000 { + label = "u-boot"; + reg = <0x01f80000 0x00080000>; + read-only; + }; }; bcsr@1,0 {Signature · 1 line
1.6.0.4.771.gef3b3
Kumar Gala
AppliedQuoted 7 lines · Kevin Hao
Add 4 partitions in nor flash. Also fix nor flash
bank width bug.Signed-off-by Kevin Hao <[email protected]>---
arch/powerpc/boot/dts/mpc8569mds.dts| 24 +++++++++++++++++++++++-1 files changed, 23 insertions(+), 1 deletions(-)
applied to next
- k