Skip to contentSkip to conversation

videobuf-core.c: add pointer check

PATCH In review Figo.zhang 2 participants 2 messages Jun 3, 2009 – Jun 5, 2009 Media (V4L/DVB)

lore
Share & tools
lore

Figo.zhang

author
#0 lore raw

PATCH 1/1 videobuf-core.c: add pointer check

add poiter check for videobuf_queue_core_init().

any guys who write a v4l driver, pass a NULL pointer or a non-inintial pointer to the first parameter such as videobuf_queue_sg_init() , it would be crashed.

Signed-off-by Figo.zhang <[email protected]>

---
drivers/media/video/videobuf-core.c | 1 +

 1 files changed, 1 insertions(+), 0 deletions(-)
drivers/media/video/videobuf-core.c +1 -0
index b7b0584..5f41fd9 100644
@@ -118,6 +118,7 @@ void videobuf_queue_core_init(struct videobuf_queue *q,
 			 void *priv,
 			 struct videobuf_qtype_ops *int_ops)
 {
+	BUG_ON(!q);
 	memset(q, 0, sizeof(*q));
 	q->irqlock   = irqlock;
 	q->dev       = dev;
#1 lore raw
Quoted 17 lines · Figo.zhang

add poiter check for videobuf_queue_core_init().

any guys who write a v4l driver, pass a NULL pointer or a non-inintial pointer to the first parameter such as videobuf_queue_sg_init() , it would be crashed.

Signed-off-by Figo.zhang <[email protected]>

---
drivers/media/video/videobuf-core.c | 1 +

 1 files changed, 1 insertions(+), 0 deletions(-)
drivers/media/video/videobuf-core.c +0 -0
index b7b0584..5f41fd9 100644

drivers/media/video/videobuf-core.c void videobuf_queue_core_init(struct videobuf_queue *q, · line 124

Quoted 7 lines
drivers/media/video/videobuf-core.c +1 -0
@@ -118,6 +118,7 @@ void videobuf_queue_core_init(struct videobuf_queue *q,
 			 void *priv,
 			 struct videobuf_qtype_ops *int_ops)
 {
+	BUG_ON(!q);
 	memset(q, 0, sizeof(*q));
 	q->irqlock   = irqlock;
 	q->dev       = dev;

i do a test driver for it, the main code like this.

struct mydev_dev{
	struct video_device *video_dev;
	...
	struct videobuf_queue      *cap;
};

static int video_open(struct inode *inode, struct file *file)

{
	...
	videobuf_queue_dma_contig_init(dev->cap, &video_qops,
				&dev->pci->dev, &dev->slock,
				V4L2_BUF_TYPE_VIDEO_CAPTURE,
				V4L2_FIELD_ALTERNATE,
				sizeof(struct mydev_buf),
				dev);

	...
}

i pass a non-initial pointer for the first argment, so it crashed.

BUG: unable to handle kernel NULL pointer dereference at 00000000
IP: [<f8d6bd67>] :videobuf_core:videobuf_queue_core_init+0x1b/0xbf
*pde = 7ed5a067 
Oops: 0002 [#1] SMP 
Modules linked in: mydev_drv tvp5160_vd videobuf_dma_contig videobuf_dma_sg
 videobuf_core videocodec videodev v4l2_int_device v4l2_common v4l1_compat
 compat_ioctl32 fuse i915 drm sco bridge stp bnep l2cap bluetooth sunrpc ipv6

cpufreq_ondemand acpi_cpufreq dm_multipath uinput snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device ppdev snd_pcm_oss parport_pc
snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_hwdep parport snd i2c_i801
i2c_core pcspkr soundcore iTCO_wdt iTCO_vendor_support r8169 mii ftdi_sio usbserial
ata_generic pata_acpi [last unloaded: microcode]

Pid: 4053, comm: capture Not tainted (2.6.27.5-117.fc10.i686 #1)
EIP: 0060:[<f8d6bd67>] EFLAGS: 00210246 CPU: 1
EIP is at videobuf_queue_core_init+0x1b/0xbf [videobuf_core]
EAX: 00000000 EBX: 00000000 ECX: 00000036 EDX: 00000036
ESI: f8e1e158 EDI: 00000000 EBP: f15f3e28 ESP: f15f3e18
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process capture (pid: 4053, ti=f15f3000 task=f1550000 task.ti=f15f3000)

Stack: f790905c f5fd5224 f15d8840 f5811560 f15f3e48 f8e01163 f5fd5224 00000001 
       00000007 0000006c f5fd5200 f8e0202c f15f3e70 f8e1b5a0 f5fd5224 00000001 
       00000007 0000006c f5fd5200 f8e0faa4 00000000 f15d8840 f15f3e88 f8e0c195 
Call Trace:
 [<f8e01163>] ? videobuf_queue_dma_contig_init+0x1c/0x21 [videobuf_dma_contig]
 [<f8e1b5a0>] ? video_open+0x8b/0xb1 [kt2741drv]
 [<f8e0c195>] ? video_open+0xc7/0x125 [videodev]
 [<c0492767>] ? chrdev_open+0x12b/0x142
 [<c048edd2>] ? __dentry_open+0x10e/0x1fc
 [<c048ef47>] ? nameidata_to_filp+0x1f/0x33
 [<c049263c>] ? chrdev_open+0x0/0x142
 [<c0498a3c>] ? do_filp_open+0x31c/0x611
 [<c048a971>] ? virt_to_head_page+0x22/0x2e
 [<c041d8ba>] ? need_resched+0x18/0x22
 [<c048ebf0>] ? do_sys_open+0x42/0xb7
 [<c048eca7>] ? sys_open+0x1e/0x26
 [<c0403c76>] ? syscall_call+0x7/0xb
 [<c06a007b>] ? init_intel_cacheinfo+0x0/0x421
 =======================
Code: d8 e8 69 ff ff ff 89 d8 e8 6d a9 93 c7 5b 5d c3 55 89 e5 57 89 c7 56 89
 d6 53 ba 36 00 00 00 83 ec 04 89 c3 89 4d f0 31 c0 89 d1 <f3> ab 8b 45 08 8b
 4d f0 89 b3 b8 00 00 00 89 43 10 8b 45 0c 89 
EIP: [<f8d6bd67>] videobuf_queue_core_init+0x1b/0xbf [videobuf_core] SS:ESP 0068:f15f3e18
---[ end trace 4bfe52d17b82af8c ]---

so i think it need to add pointer checking for the first argment of videobuf_queue_core_init(), the videobuf code would be more stronger and reliable.