Skip to contentSkip to conversation

mtd: physmap_of: Add multiple regions and concatenation support

PATCH In review Stefan Roese 8 participants 14 messages Apr 16, 2009 – Jun 23, 2009 5 messages not in the archive Memory technology devices (MTD)

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/3 mtd: physmap_of: Add multiple regions and concatenation support

This patch adds support to handle multiple non-identical chips in one flash device tree node. It also adds concat support to physmap_of. This makes it possible to support e.g. the Intel P30 48F4400 chips which internally consists of 2 non-identical NOR chips on one die. Additionally partitions now can span over multiple chips.

To describe such a chip's, multiple "reg" tuples are now supported in one flash device tree node. Here an dts example:

        flash@f0000000,0 {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "cfi-flash";
                reg = <0 0x00000000 0x02000000
                       0 0x02000000 0x02000000>;
                bank-width = <2>;
                partition@0 {
                        label = "test-part1";
                        reg = <0 0x04000000>;
                };
        };

---
Changes in ver3:
- s/4/sizeof(u32)

Changes in ver2 (as suggested by Grant Likely):
- Removed MAX_RESOURCES introduced in ver1. Now we don't have a hard limit for "reg" tuples anymore.
- Used of_n_addr_cells() and of_n_size_cells() to determine size of each tuple.

 drivers/mtd/maps/physmap_of.c |  199 +++++++++++++++++++++++++++++------------
 1 files changed, 143 insertions(+), 56 deletions(-)
drivers/mtd/maps/physmap_of.c +143 -56
index c83a60f..39d357b 100644
@@ -20,16 +20,23 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/concat.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 
+struct of_flash_list {
+	struct mtd_info *mtd;
+	struct map_info map;
+	struct resource *res;
+};
+
 struct of_flash {
-	struct mtd_info		*mtd;
-	struct map_info		map;
-	struct resource		*res;
+	struct mtd_info		*cmtd;
 #ifdef CONFIG_MTD_PARTITIONS
 	struct mtd_partition	*parts;
 #endif
+	int list_size; /* number of elements in of_flash_list */
+	struct of_flash_list	list[0];
 };
 
 #ifdef CONFIG_MTD_PARTITIONS
@@ -88,30 +95,44 @@ static int parse_obsolete_partitions(struct of_device *dev,
 static int of_flash_remove(struct of_device *dev)
 {
 	struct of_flash *info;
+	int i;
 
 	info = dev_get_drvdata(&dev->dev);
 	if (!info)
 		return 0;
 	dev_set_drvdata(&dev->dev, NULL);
 
-	if (info->mtd) {
+#ifdef CONFIG_MTD_CONCAT
+	if (info->cmtd != info->list[0].mtd) {
+		del_mtd_device(info->cmtd);
+		mtd_concat_destroy(info->cmtd);
+	}
+#endif
+
+	if (info->cmtd) {
 		if (OF_FLASH_PARTS(info)) {
-			del_mtd_partitions(info->mtd);
+			del_mtd_partitions(info->cmtd);
 			kfree(OF_FLASH_PARTS(info));
 		} else {
-			del_mtd_device(info->mtd);
+			del_mtd_device(info->cmtd);
 		}
-		map_destroy(info->mtd);
 	}
 
-	if (info->map.virt)
-		iounmap(info->map.virt);
+	for (i = 0; i < info->list_size; i++) {
+		if (info->list[i].mtd)
+			map_destroy(info->list[i].mtd);
 
-	if (info->res) {
-		release_resource(info->res);
-		kfree(info->res);
+		if (info->list[i].map.virt)
+			iounmap(info->list[i].map.virt);
+
+		if (info->list[i].res) {
+			release_resource(info->list[i].res);
+			kfree(info->list[i].res);
+		}
 	}
 
+	kfree(info);
+
 	return 0;
 }
 
@@ -164,68 +185,130 @@ static int __devinit of_flash_probe(struct of_device *dev,
 	const char *probe_type = match->data;
 	const u32 *width;
 	int err;
-
-	err = -ENXIO;
-	if (of_address_to_resource(dp, 0, &res)) {
-		dev_err(&dev->dev, "Can't get IO address from device tree\n");
+	int i;
+	int count;
+	const u32 *p;
+	int reg_tuple_size;
+	struct mtd_info **mtd_list = NULL;
+
+	reg_tuple_size = (of_n_addr_cells(dp) + of_n_size_cells(dp)) * sizeof(u32);
+
+	/*
+	 * Get number of "reg" tuples. Scan for MTD devices on area's
+	 * described by each "reg" region. This makes it possible (including
+	 * the concat support) to support the Intel P30 48F4400 chips which
+	 * consists internally of 2 non-identical NOR chips on one die.
+	 */
+	p = of_get_property(dp, "reg", &count);
+	if (count % reg_tuple_size != 0) {
+		dev_err(&dev->dev, "Malformed reg property on %s\n",
+				dev->node->full_name);
+		err = -EINVAL;
 		goto err_out;
 	}
-
-       	dev_dbg(&dev->dev, "of_flash device: %.8llx-%.8llx\n",
-		(unsigned long long)res.start, (unsigned long long)res.end);
+	count /= reg_tuple_size;
 
 	err = -ENOMEM;
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	info = kzalloc(sizeof(struct of_flash) +
+		       sizeof(struct of_flash_list) * count, GFP_KERNEL);
+	if (!info)
+		goto err_out;
+
+	mtd_list = kzalloc(sizeof(struct mtd_info) * count, GFP_KERNEL);
 	if (!info)
 		goto err_out;
 
 	dev_set_drvdata(&dev->dev, info);
 
-	err = -EBUSY;
-	info->res = request_mem_region(res.start, res.end - res.start + 1,
-				       dev_name(&dev->dev));
-	if (!info->res)
-		goto err_out;
+	for (i = 0; i < count; i++) {
+		err = -ENXIO;
+		if (of_address_to_resource(dp, i, &res)) {
+			dev_err(&dev->dev, "Can't get IO address from device"
+				" tree\n");
+			goto err_out;
+		}
 
-	err = -ENXIO;
-	width = of_get_property(dp, "bank-width", NULL);
-	if (!width) {
-		dev_err(&dev->dev, "Can't get bank width from device tree\n");
-		goto err_out;
-	}
+		dev_dbg(&dev->dev, "of_flash device: %.8llx-%.8llx\n",
+			(unsigned long long)res.start,
+			(unsigned long long)res.end);
+
+		err = -EBUSY;
+		info->list[i].res = request_mem_region(res.start, res.end -
+						       res.start + 1,
+						       dev_name(&dev->dev));
+		if (!info->list[i].res)
+			goto err_out;
+
+		err = -ENXIO;
+		width = of_get_property(dp, "bank-width", NULL);
+		if (!width) {
+			dev_err(&dev->dev, "Can't get bank width from device"
+				" tree\n");
+			goto err_out;
+		}
 
-	info->map.name = dev_name(&dev->dev);
-	info->map.phys = res.start;
-	info->map.size = res.end - res.start + 1;
-	info->map.bankwidth = *width;
+		info->list[i].map.name = dev_name(&dev->dev);
+		info->list[i].map.phys = res.start;
+		info->list[i].map.size = res.end - res.start + 1;
+		info->list[i].map.bankwidth = *width;
+
+		err = -ENOMEM;
+		info->list[i].map.virt = ioremap(info->list[i].map.phys,
+						 info->list[i].map.size);
+		if (!info->list[i].map.virt) {
+			dev_err(&dev->dev, "Failed to ioremap() flash"
+				" region\n");
+			goto err_out;
+		}
 
-	err = -ENOMEM;
-	info->map.virt = ioremap(info->map.phys, info->map.size);
-	if (!info->map.virt) {
-		dev_err(&dev->dev, "Failed to ioremap() flash region\n");
-		goto err_out;
-	}
+		simple_map_init(&info->list[i].map);
 
-	simple_map_init(&info->map);
+		if (probe_type) {
+			info->list[i].mtd = do_map_probe(probe_type,
+							 &info->list[i].map);
+		} else {
+			info->list[i].mtd = obsolete_probe(dev,
+							   &info->list[i].map);
+		}
+		mtd_list[i] = info->list[i].mtd;
 
-	if (probe_type)
-		info->mtd = do_map_probe(probe_type, &info->map);
-	else
-		info->mtd = obsolete_probe(dev, &info->map);
+		err = -ENXIO;
+		if (!info->list[i].mtd) {
+			dev_err(&dev->dev, "do_map_probe() failed\n");
+			goto err_out;
+		} else {
+			info->list_size++;
+		}
+		info->list[i].mtd->owner = THIS_MODULE;
+		info->list[i].mtd->dev.parent = &dev->dev;
+	}
 
-	err = -ENXIO;
-	if (!info->mtd) {
-		dev_err(&dev->dev, "do_map_probe() failed\n");
-		goto err_out;
+	err = 0;
+	if (info->list_size == 1) {
+		info->cmtd = info->list[0].mtd;
+	} else if (info->list_size > 1) {
+		/*
+		 * We detected multiple devices. Concatenate them together.
+		 */
+#ifdef CONFIG_MTD_CONCAT
+		info->cmtd = mtd_concat_create(mtd_list, info->list_size,
+					       dev_name(&dev->dev));
+		if (info->cmtd == NULL)
+			err = -ENXIO;
+#else
+		printk(KERN_ERR "physmap_of: multiple devices "
+		       "found but MTD concat support disabled.\n");
+		err = -ENXIO;
+#endif
 	}
-	info->mtd->owner = THIS_MODULE;
-	info->mtd->dev.parent = &dev->dev;
+	if (err)
+		goto err_out;
 
 #ifdef CONFIG_MTD_PARTITIONS
 	/* First look for RedBoot table or partitions on the command
 	 * line, these take precedence over device tree information */
-	err = parse_mtd_partitions(info->mtd, part_probe_types,
-	                           &info->parts, 0);
+	err = parse_mtd_partitions(info->cmtd, part_probe_types,
+				   &info->parts, 0);
 	if (err < 0)
 		return err;
 
@@ -244,15 +327,19 @@ static int __devinit of_flash_probe(struct of_device *dev,
 	}
 
 	if (err > 0)
-		add_mtd_partitions(info->mtd, info->parts, err);
+		add_mtd_partitions(info->cmtd, info->parts, err);
 	else
 #endif
-		add_mtd_device(info->mtd);
+		add_mtd_device(info->cmtd);
+
+	kfree(mtd_list);
 
 	return 0;
 
 err_out:
+	kfree(mtd_list);
 	of_flash_remove(dev);
+
 	return err;
 }
 
Signature · 1 line
1.6.2.3

A message that is not in the archive (sent off-list or not yet received): 1239883845-17804-1-git-send-email-sr-ynQEQJNshbs@public.gmane.org

#2 lore raw
Quoted 22 lines · Stefan Roese

This patch adds support to handle multiple non-identical chips in one flash device tree node. It also adds concat support to physmap_of. This makes it possible to support e.g. the Intel P30 48F4400 chips which internally consists of 2 non-identical NOR chips on one die. Additionally partitions now can span over multiple chips.

To describe such a chip's, multiple "reg" tuples are now supported in one flash device tree node. Here an dts example:

       flash@f0000000,0 {
               #address-cells = <1>;
               #size-cells = <1>;
               compatible = "cfi-flash";
               reg = <0 0x00000000 0x02000000
                      0 0x02000000 0x02000000>;
               bank-width = <2>;
               partition@0 {
                       label = "test-part1";
                       reg = <0 0x04000000>;
               };
       };

Quoted 2 lines

Yup, still looks good to me. What boards has this been tested on?

g.

Quoted 296 lines

---
Changes in ver3:
- s/4/sizeof(u32)

Changes in ver2 (as suggested by Grant Likely):
- Removed MAX_RESOURCES introduced in ver1. Now we don't have a hard limit for "reg" tuples anymore.
- Used of_n_addr_cells() and of_n_size_cells() to determine size of each tuple.

 drivers/mtd/maps/physmap_of.c |  199 +++++++++++++++++++++++++++++------------

 1 files changed, 143 insertions(+), 56 deletions(-)
drivers/mtd/maps/physmap_of.c +138 -55
index c83a60f..39d357b 100644
@@ -20,16 +20,23 @@
  #include <linux/mtd/mtd.h>
  #include <linux/mtd/map.h>
  #include <linux/mtd/partitions.h>
+#include <linux/mtd/concat.h>
  #include <linux/of.h>
  #include <linux/of_platform.h>
 
+struct of_flash_list {
+       struct mtd_info *mtd;
+       struct map_info map;
+       struct resource *res;
+};
+
  struct of_flash {
-       struct mtd_info         *mtd;
-       struct map_info         map;
-       struct resource         *res;
+       struct mtd_info         *cmtd;
  #ifdef CONFIG_MTD_PARTITIONS
        struct mtd_partition    *parts;
  #endif
+       int list_size; /* number of elements in of_flash_list */
+       struct of_flash_list    list[0];
  };
 
  #ifdef CONFIG_MTD_PARTITIONS
@@ -88,30 +95,44 @@ static int parse_obsolete_partitions(struct of_device *dev,
  static int of_flash_remove(struct of_device *dev)
  {
        struct of_flash *info;
+       int i;
 
        info = dev_get_drvdata(&dev->dev);
        if (!info)
                return 0;
        dev_set_drvdata(&dev->dev, NULL);
 
-       if (info->mtd) {
+#ifdef CONFIG_MTD_CONCAT
+       if (info->cmtd != info->list[0].mtd) {
+               del_mtd_device(info->cmtd);
+               mtd_concat_destroy(info->cmtd);
+       }
+#endif
+
+       if (info->cmtd) {
                if (OF_FLASH_PARTS(info)) {
-                       del_mtd_partitions(info->mtd);
+                       del_mtd_partitions(info->cmtd);
                        kfree(OF_FLASH_PARTS(info));
                } else {
-                       del_mtd_device(info->mtd);
+                       del_mtd_device(info->cmtd);
                }
-               map_destroy(info->mtd);
        }
 
-       if (info->map.virt)
-               iounmap(info->map.virt);
+       for (i = 0; i < info->list_size; i++) {
+               if (info->list[i].mtd)
+                       map_destroy(info->list[i].mtd);
 
-       if (info->res) {
-               release_resource(info->res);
-               kfree(info->res);
+               if (info->list[i].map.virt)
+                       iounmap(info->list[i].map.virt);
+
+               if (info->list[i].res) {
+                       release_resource(info->list[i].res);
+                       kfree(info->list[i].res);
+               }
        }
 
+       kfree(info);
+
        return 0;
  }
 
@@ -164,68 +185,130 @@ static int __devinit of_flash_probe(struct of_device *dev,
        const char *probe_type = match->data;
        const u32 *width;
        int err;
-
-       err = -ENXIO;
-       if (of_address_to_resource(dp, 0, &res)) {
-               dev_err(&dev->dev, "Can't get IO address from device tree\n");
+       int i;
+       int count;
+       const u32 *p;
+       int reg_tuple_size;
+       struct mtd_info **mtd_list = NULL;
+
+       reg_tuple_size = (of_n_addr_cells(dp) + of_n_size_cells(dp)) * sizeof(u32);
+
+       /*
+        * Get number of "reg" tuples. Scan for MTD devices on area's
+        * described by each "reg" region. This makes it possible (including
+        * the concat support) to support the Intel P30 48F4400 chips which
+        * consists internally of 2 non-identical NOR chips on one die.
+        */
+       p = of_get_property(dp, "reg", &count);
+       if (count % reg_tuple_size != 0) {
+               dev_err(&dev->dev, "Malformed reg property on %s\n",
+                               dev->node->full_name);
+               err = -EINVAL;
                goto err_out;
        }
-
-               dev_dbg(&dev->dev, "of_flash device: %.8llx-%.8llx\n",
-               (unsigned long long)res.start, (unsigned long long)res.end);
+       count /= reg_tuple_size;
 
        err = -ENOMEM;
-       info = kzalloc(sizeof(*info), GFP_KERNEL);
+       info = kzalloc(sizeof(struct of_flash) +
+                      sizeof(struct of_flash_list) * count, GFP_KERNEL);
+       if (!info)
+               goto err_out;
+
+       mtd_list = kzalloc(sizeof(struct mtd_info) * count, GFP_KERNEL);
        if (!info)
                goto err_out;
 
        dev_set_drvdata(&dev->dev, info);
 
-       err = -EBUSY;
-       info->res = request_mem_region(res.start, res.end - res.start + 1,
-                                      dev_name(&dev->dev));
-       if (!info->res)
-               goto err_out;
+       for (i = 0; i < count; i++) {
+               err = -ENXIO;
+               if (of_address_to_resource(dp, i, &res)) {
+                       dev_err(&dev->dev, "Can't get IO address from device"
+                               " tree\n");
+                       goto err_out;
+               }
 
-       err = -ENXIO;
-       width = of_get_property(dp, "bank-width", NULL);
-       if (!width) {
-               dev_err(&dev->dev, "Can't get bank width from device tree\n");
-               goto err_out;
-       }
+               dev_dbg(&dev->dev, "of_flash device: %.8llx-%.8llx\n",
+                       (unsigned long long)res.start,
+                       (unsigned long long)res.end);
+
+               err = -EBUSY;
+               info->list[i].res = request_mem_region(res.start, res.end -
+                                                      res.start + 1,
+                                                      dev_name(&dev->dev));
+               if (!info->list[i].res)
+                       goto err_out;
+
+               err = -ENXIO;
+               width = of_get_property(dp, "bank-width", NULL);
+               if (!width) {
+                       dev_err(&dev->dev, "Can't get bank width from device"
+                               " tree\n");
+                       goto err_out;
+               }
 
-       info->map.name = dev_name(&dev->dev);
-       info->map.phys = res.start;
-       info->map.size = res.end - res.start + 1;
-       info->map.bankwidth = *width;
+               info->list[i].map.name = dev_name(&dev->dev);
+               info->list[i].map.phys = res.start;
+               info->list[i].map.size = res.end - res.start + 1;
+               info->list[i].map.bankwidth = *width;
+
+               err = -ENOMEM;
+               info->list[i].map.virt = ioremap(info->list[i].map.phys,
+                                                info->list[i].map.size);
+               if (!info->list[i].map.virt) {
+                       dev_err(&dev->dev, "Failed to ioremap() flash"
+                               " region\n");
+                       goto err_out;
+               }
 
-       err = -ENOMEM;
-       info->map.virt = ioremap(info->map.phys, info->map.size);
-       if (!info->map.virt) {
-               dev_err(&dev->dev, "Failed to ioremap() flash region\n");
-               goto err_out;
-       }
+               simple_map_init(&info->list[i].map);
 
-       simple_map_init(&info->map);
+               if (probe_type) {
+                       info->list[i].mtd = do_map_probe(probe_type,
+                                                        &info->list[i].map);
+               } else {
+                       info->list[i].mtd = obsolete_probe(dev,
+                                                          &info->list[i].map);
+               }
+               mtd_list[i] = info->list[i].mtd;
 
-       if (probe_type)
-               info->mtd = do_map_probe(probe_type, &info->map);
-       else
-               info->mtd = obsolete_probe(dev, &info->map);
+               err = -ENXIO;
+               if (!info->list[i].mtd) {
+                       dev_err(&dev->dev, "do_map_probe() failed\n");
+                       goto err_out;
+               } else {
+                       info->list_size++;
+               }
+               info->list[i].mtd->owner = THIS_MODULE;
+               info->list[i].mtd->dev.parent = &dev->dev;
+       }
 
-       err = -ENXIO;
-       if (!info->mtd) {
-               dev_err(&dev->dev, "do_map_probe() failed\n");
-               goto err_out;
+       err = 0;
+       if (info->list_size == 1) {
+               info->cmtd = info->list[0].mtd;
+       } else if (info->list_size > 1) {
+               /*
+                * We detected multiple devices. Concatenate them together.
+                */
+#ifdef CONFIG_MTD_CONCAT
+               info->cmtd = mtd_concat_create(mtd_list, info->list_size,
+                                              dev_name(&dev->dev));
+               if (info->cmtd == NULL)
+                       err = -ENXIO;
+#else
+               printk(KERN_ERR "physmap_of: multiple devices "
+                      "found but MTD concat support disabled.\n");
+               err = -ENXIO;
+#endif
        }
-       info->mtd->owner = THIS_MODULE;
-       info->mtd->dev.parent = &dev->dev;
+       if (err)
+               goto err_out;
 
  #ifdef CONFIG_MTD_PARTITIONS
        /* First look for RedBoot table or partitions on the command
         * line, these take precedence over device tree information */
-       err = parse_mtd_partitions(info->mtd, part_probe_types,
-                                  &info->parts, 0);
+       err = parse_mtd_partitions(info->cmtd, part_probe_types,
+                                  &info->parts, 0);
        if (err < 0)
                return err;
 
@@ -244,15 +327,19 @@ static int __devinit of_flash_probe(struct of_device *dev,
        }
 
        if (err > 0)
-               add_mtd_partitions(info->mtd, info->parts, err);
+               add_mtd_partitions(info->cmtd, info->parts, err);

       else
 #endif
-               add_mtd_device(info->mtd);
+               add_mtd_device(info->cmtd);
+
+       kfree(mtd_list);

       return 0;

 err_out:
+       kfree(mtd_list);
       of_flash_remove(dev);
+
       return err;
 }

--
1.6.2.3

Signature · 2 lines
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.

A message that is not in the archive (sent off-list or not yet received): fa686aa40904160626k118cea3cvc0db38a2277e45b8-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org

#4 lore raw
Quoted 4 lines · Grant Likely
Quoted 2 lines

Yup, still looks good to me. What boards has this been tested on?

I tested this version on PPC405EX Kilauea equipped only one "standard" Spansion S29GL512 NOR chip. And a slightly modified version on an MPC8360 board (kmeter1) which is equipped with the Intel P30 part mentioned in the bindings description. Slightly modified since this board support is not yet pushed upstream and currently using v2.6.28 (physmap_of.c has received minor modifications after 2.6.28 release).

Thanks.

Best regards,
Stefan

#5 lore raw
Quoted 4 lines · Stefan Roese
Quoted 3 lines · Grant Likely
Quoted 2 lines
Quoted 8 lines
Quoted 1 line

Yup, still looks good to me.  What boards has this been tested on?

I tested this version on PPC405EX Kilauea equipped only one "standard" Spansion S29GL512 NOR chip. And a slightly modified version on an MPC8360 board (kmeter1) which is equipped with the Intel P30 part mentioned in the bindings description. Slightly modified since this board support is not yet pushed upstream and currently using v2.6.28 (physmap_of.c has received minor modifications after 2.6.28 release).

Okay. It will be good to get this one into -next for some testing exposure. Unless he asks me to do otherwise, I'll leave this one to David to pick up.

g.

Signature · 2 lines
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.

A message that is not in the archive (sent off-list or not yet received): fa686aa40904160646v75a98e02s446fd89c08cfebae-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org

#7 lore raw
Quoted 9 lines · Grant Likely
Quoted 8 lines
Quoted 1 line

Yup, still looks good to me.  What boards has this been tested on?

I tested this version on PPC405EX Kilauea equipped only one "standard" Spansion S29GL512 NOR chip. And a slightly modified version on an MPC8360 board (kmeter1) which is equipped with the Intel P30 part mentioned in the bindings description. Slightly modified since this board support is not yet pushed upstream and currently using v2.6.28 (physmap_of.c has received minor modifications after 2.6.28 release).

Quoted 3 lines

Okay. It will be good to get this one into -next for some testing exposure. Unless he asks me to do otherwise, I'll leave this one to David to pick up.

Understood. Thanks Grant.

Best regards,
Stefan

#8 lore raw
Quoted 5 lines · On Thursday 16 April 2009 15:49:44 Stefan Roese wrote:
Quoted 3 lines

Okay. It will be good to get this one into -next for some testing exposure. Unless he asks me to do otherwise, I'll leave this one to David to pick up.

Understood. Thanks Grant.

David, just checking on the status of this patch. Is it in your queue for the next merge window?

Thanks,
Stefan

#9 lore raw
In reply to Grant Likely
Quoted 14 lines · Grant Likely
Quoted 4 lines · Stefan Roese
Quoted 3 lines · Grant Likely
Quoted 2 lines
Quoted 8 lines
Quoted 1 line

Yup, still looks good to me. What boards has this been tested on?

I tested this version on PPC405EX Kilauea equipped only one "standard" Spansion S29GL512 NOR chip. And a slightly modified version on an MPC8360 board (kmeter1) which is equipped with the Intel P30 part mentioned in the bindings description. Slightly modified since this board support is not yet pushed upstream and currently using v2.6.28 (physmap_of.c has received minor modifications after 2.6.28 release).

Quoted 3 lines

Okay. It will be good to get this one into -next for some testing exposure. Unless he asks me to do otherwise, I'll leave this one to David to pick up.

David usually picks up stuff just before or during merge window, so if you want linux-next exposure, you need to have some extra care.

Signature · 7 lines
Best regards,
Artem Bityutskiy (Битюцкий Артём)

_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev
#10 lore raw
Quoted 15 lines · Artem Bityutskiy
Quoted 14 lines · Grant Likely
Quoted 12 lines · Stefan Roese
Quoted 4 lines · Grant Likely
Quoted 2 lines

Yup, still looks good to me.  What boards has this been tested on?

I tested this version on PPC405EX Kilauea equipped only one "standard" Spansion S29GL512 NOR chip. And a slightly modified version on an MPC8360 board (kmeter1) which is equipped with the Intel P30 part mentioned in the bindings description. Slightly modified since this board support is not yet pushed upstream and currently using v2.6.28 (physmap_of.c has received minor modifications after 2.6.28 release).

Quoted 7 lines
Quoted 3 lines

Okay.  It will be good to get this one into -next for some testing exposure.  Unless he asks me to do otherwise, I'll leave this one to David to pick up.

David usually picks up stuff just before or during merge window, so if you want linux-next exposure, you need to have some extra care.

Okay, thanks.

David, I'd like to get this into a -next tree. Are you okay with it going in via the powerpc tree?

g.

Signature · 2 lines
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
#11 lore raw
In reply to Artem Bityutskiy
Quoted 15 lines · Artem Bityutskiy
Quoted 14 lines · Grant Likely
Quoted 12 lines · Stefan Roese
Quoted 4 lines · Grant Likely
Quoted 2 lines

Yup, still looks good to me. What boards has this been tested on?

I tested this version on PPC405EX Kilauea equipped only one "standard" Spansion S29GL512 NOR chip. And a slightly modified version on an MPC8360 board (kmeter1) which is equipped with the Intel P30 part mentioned in the bindings description. Slightly modified since this board support is not yet pushed upstream and currently using v2.6.28 (physmap_of.c has received minor modifications after 2.6.28 release).

Quoted 7 lines
Quoted 3 lines

Okay. It will be good to get this one into -next for some testing exposure. Unless he asks me to do otherwise, I'll leave this one to David to pick up.

David usually picks up stuff just before or during merge window, so if you want linux-next exposure, you need to have some extra care.

I don't necessarily do that on purpose; it just works out that way when I'm busy.

Signature · 1 line
dwmw2
#12 lore raw
Quoted 21 lines · David Woodhouse
Quoted 19 lines · Artem Bityutskiy
Quoted 17 lines · Grant Likely
Quoted 4 lines · Stefan Roese
Quoted 3 lines · Grant Likely
Quoted 2 lines
Quoted 8 lines
Quoted 1 line

Yup, still looks good to me. What boards has this been tested on?

I tested this version on PPC405EX Kilauea equipped only one "standard" Spansion S29GL512 NOR chip. And a slightly modified version on an MPC8360 board (kmeter1) which is equipped with the Intel P30 part mentioned in the bindings description. Slightly modified since this board support is not yet pushed upstream and currently using v2.6.28 (physmap_of.c has received minor modifications after 2.6.28 release).

Okay. It will be good to get this one into -next for some testing exposure. Unless he asks me to do otherwise, I'll leave this one to David to pick up.

Quoted 6 lines
Quoted 3 lines

David usually picks up stuff just before or during merge window, so if you want linux-next exposure, you need to have some extra care.

I don't necessarily do that on purpose; it just works out that way when I'm busy.

Yeah, not that I try to blame you, but I think we need to expose stuff to linux-next. And people who send patches are frustrated when their stuff gets no attention for very long time.

I understand that MTD tree maintenance is a burden, and you are very busy, and no one pays you for this job. Thanks for doing it!

I'm going to try to help you. I've just created a git tree where I'll push patches I consider OK and I approve. Here it is:
git://git.infradead.org/users/dedekind/l2-mtd-2.6.git

My hope is that you would look at that tree from time to time and pull it. At least you may be sure I looked at the patches and did some validation. This should save your time and help MTD users.

Thanks.

Signature · 7 lines
Best regards,
Artem Bityutskiy (Битюцкий Артём)

_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev

A message that is not in the archive (sent off-list or not yet received): 1239956778.3390.262.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/[email protected]

#14 lore raw
Quoted 9 lines · Artem Bityutskiy

I'm going to try to help you. I've just created a git tree where I'll push patches I consider OK and I approve. Here it is:
git://git.infradead.org/users/dedekind/l2-mtd-2.6.git

My hope is that you would look at that tree from time to time and pull it. At least you may be sure I looked at the patches and did some validation. This should save your time and help MTD users.

This was _really_ useful. Thank you very much.

Signature · 2 lines
David Woodhouse                            Open Source Technology Centre
[email protected]                              Intel Corporation
#15 lore raw
In reply to David Woodhouse
Quoted 7 lines · David Woodhouse
Quoted 5 lines · Artem Bityutskiy
Quoted 3 lines · Grant Likely

Okay.  It will be good to get this one into -next for some testing exposure.  Unless he asks me to do otherwise, I'll leave this one to David to pick up.

Quoted 6 lines
Quoted 3 lines

David usually picks up stuff just before or during merge window, so if you want linux-next exposure, you need to have some extra care.

I don't necessarily do that on purpose; it just works out that way when I'm busy.

Are you ever _not_ busy? ;)

josh

#16 lore raw
In reply to Grant Likely
Quoted 14 lines · Grant Likely
Quoted 4 lines · Stefan Roese
Quoted 3 lines · Grant Likely
Quoted 2 lines
Quoted 8 lines
Quoted 1 line

Yup, still looks good to me.  What boards has this been tested on?

I tested this version on PPC405EX Kilauea equipped only one "standard" Spansion S29GL512 NOR chip. And a slightly modified version on an MPC8360 board (kmeter1) which is equipped with the Intel P30 part mentioned in the bindings description. Slightly modified since this board support is not yet pushed upstream and currently using v2.6.28 (physmap_of.c has received minor modifications after 2.6.28 release).

Quoted 3 lines

Okay.  It will be good to get this one into -next for some testing exposure.  Unless he asks me to do otherwise, I'll leave this one to David to pick up.

David, what's the status of this patch? Will it be merged for 2.6.31?

g.

Signature · 2 lines
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.

A message that is not in the archive (sent off-list or not yet received): fa686aa40906162253j76776e88y9d7c818f4d0f1508-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org

#18 lore raw
Quoted 1 line · On Wednesday 17 June 2009 07:53:51 Grant Likely wrote:

David, what's the status of this patch? Will it be merged for 2.6.31?

It's merged now.

Thanks,
Stefan