Skip to contentSkip to conversation

pci: Provide Multiple Error Received and no error source id support on AER

PATCH Superseded Zhang, Yanmin 2 participants 3 messages Jun 12, 2009 – Jun 15, 2009

Subsystems (3)

v4 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH v4 1/3 pci: Provide Multiple Error Received and no error source id support on AER

Anyone could help me test it on powerpc? Or at least a compilation to see there is any compiling error/warning. I have no powerpc machine. Thanks.

Changelog V4:

	Port the patches to Jesses' linux-next tree (mostly based on
	2.6.30).

Changelog V3:
1) Probe devices under the root port when the bus id of the source id is equal to 0; V2 does so when device id is equal to 0;
2) Add more comments on critical path of finding devices.

Changelog V2:
Version 2 adds nosourceid, a boot parameter. When aerdriver.nosourceid=y, aerdriver doesn't use the source id saved by root port. Instead, it searches the device tree under the root port to find the reporter. So if hardware has errata and root port saves a bad source id, aerdriver still could find the reporter.
There are 2 scenarios under which aerdriver searches the device tree under root port:
1) nosourceid=n and error source id is equal to 0;
2) nosourceid=y.

Based on PCI Express AER specs, a root port might receive multiple TLP errors while it could only save a correctable error source id and an uncorrectable error source id at the same time. In addition, some root port hardware might be unable to provide a correct source id, i.e., the source id, or the bus id part of the source id provided by root port might be equal to 0.

The patchset implements the support in kernel by searching the device tree under the root port.

Patch 1 changes parameter cb of function pci_walk_bus to return a value. When cb return non-zero, pci_walk_bus stops more searching on the device tree.

Signed-off-by: Zhang Yanmin <[email protected]>

---

arch/powerpc/platforms/pseries/eeh_driver.c +24 -14
diff -Nraup linux-2.6_next/arch/powerpc/platforms/pseries/eeh_driver.c linux-2.6_next_pciwalk/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -122,7 +122,7 @@ static void eeh_enable_irq(struct pci_de
  * passed back in "userdata".
  */
 
-static void eeh_report_error(struct pci_dev *dev, void *userdata)
+static int eeh_report_error(struct pci_dev *dev, void *userdata)
 {
 	enum pci_ers_result rc, *res = userdata;
 	struct pci_driver *driver = dev->driver;
@@ -130,19 +130,21 @@ static void eeh_report_error(struct pci_
 	dev->error_state = pci_channel_io_frozen;
 
 	if (!driver)
-		return;
+		return 0;
 
 	eeh_disable_irq(dev);
 
 	if (!driver->err_handler ||
 	    !driver->err_handler->error_detected)
-		return;
+		return 0;
 
 	rc = driver->err_handler->error_detected (dev, pci_channel_io_frozen);
 
 	/* A driver that needs a reset trumps all others */
 	if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
 	if (*res == PCI_ERS_RESULT_NONE) *res = rc;
+
+	return 0;
 }
 
 /**
@@ -153,7 +155,7 @@ static void eeh_report_error(struct pci_
  * Cumulative response passed back in "userdata".
  */
 
-static void eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata)
+static int eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata)
 {
 	enum pci_ers_result rc, *res = userdata;
 	struct pci_driver *driver = dev->driver;
@@ -161,26 +163,28 @@ static void eeh_report_mmio_enabled(stru
 	if (!driver ||
 	    !driver->err_handler ||
 	    !driver->err_handler->mmio_enabled)
-		return;
+		return 0;
 
 	rc = driver->err_handler->mmio_enabled (dev);
 
 	/* A driver that needs a reset trumps all others */
 	if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
 	if (*res == PCI_ERS_RESULT_NONE) *res = rc;
+
+	return 0;
 }
 
 /**
  * eeh_report_reset - tell device that slot has been reset
  */
 
-static void eeh_report_reset(struct pci_dev *dev, void *userdata)
+static int eeh_report_reset(struct pci_dev *dev, void *userdata)
 {
 	enum pci_ers_result rc, *res = userdata;
 	struct pci_driver *driver = dev->driver;
 
 	if (!driver)
-		return;
+		return 0;
 
 	dev->error_state = pci_channel_io_normal;
 
@@ -188,35 +192,39 @@ static void eeh_report_reset(struct pci_
 
 	if (!driver->err_handler ||
 	    !driver->err_handler->slot_reset)
-		return;
+		return 0;
 
 	rc = driver->err_handler->slot_reset(dev);
 	if ((*res == PCI_ERS_RESULT_NONE) ||
 	    (*res == PCI_ERS_RESULT_RECOVERED)) *res = rc;
 	if (*res == PCI_ERS_RESULT_DISCONNECT &&
 	     rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
+
+	return 0;
 }
 
 /**
  * eeh_report_resume - tell device to resume normal operations
  */
 
-static void eeh_report_resume(struct pci_dev *dev, void *userdata)
+static int eeh_report_resume(struct pci_dev *dev, void *userdata)
 {
 	struct pci_driver *driver = dev->driver;
 
 	dev->error_state = pci_channel_io_normal;
 
 	if (!driver)
-		return;
+		return 0;
 
 	eeh_enable_irq(dev);
 
 	if (!driver->err_handler ||
 	    !driver->err_handler->resume)
-		return;
+		return 0;
 
 	driver->err_handler->resume(dev);
+
+	return 0;
 }
 
 /**
@@ -226,22 +234,24 @@ static void eeh_report_resume(struct pci
  * dead, and that no further recovery attempts will be made on it.
  */
 
-static void eeh_report_failure(struct pci_dev *dev, void *userdata)
+static int eeh_report_failure(struct pci_dev *dev, void *userdata)
 {
 	struct pci_driver *driver = dev->driver;
 
 	dev->error_state = pci_channel_io_perm_failure;
 
 	if (!driver)
-		return;
+		return 0;
 
 	eeh_disable_irq(dev);
 
 	if (!driver->err_handler ||
 	    !driver->err_handler->error_detected)
-		return;
+		return 0;
 
 	driver->err_handler->error_detected(dev, pci_channel_io_perm_failure);
+
+	return 0;
 }
 
 /* ------------------------------------------------------- */
drivers/pci/bus.c +9 -2
diff -Nraup linux-2.6_next/drivers/pci/bus.c linux-2.6_next_pciwalk/drivers/pci/bus.c
@@ -206,13 +206,18 @@ void pci_enable_bridges(struct pci_bus *
  *  Walk the given bus, including any bridged devices
  *  on buses under this bus.  Call the provided callback
  *  on each device found.
+ *
+ *  We check the return of @cb each time. If it returns anything
+ *  other than 0, we break out.
+ *
  */
-void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *),
+void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
 		  void *userdata)
 {
 	struct pci_dev *dev;
 	struct pci_bus *bus;
 	struct list_head *next;
+	int retval;
 
 	bus = top;
 	down_read(&pci_bus_sem);
@@ -236,8 +241,10 @@ void pci_walk_bus(struct pci_bus *top, v
 
 		/* Run device routines with the device locked */
 		down(&dev->dev.sem);
-		cb(dev, userdata);
+		retval = cb(dev, userdata);
 		up(&dev->dev.sem);
+		if (retval)
+			break;
 	}
 	up_read(&pci_bus_sem);
 }
drivers/pci/pcie/aer/aerdrv_core.c +16 -14
diff -Nraup linux-2.6_next/drivers/pci/pcie/aer/aerdrv_core.c linux-2.6_next_pciwalk/drivers/pci/pcie/aer/aerdrv_core.c
@@ -109,7 +109,7 @@ int pci_cleanup_aer_correct_error_status
 #endif  /*  0  */
 
 
-static void set_device_error_reporting(struct pci_dev *dev, void *data)
+static int set_device_error_reporting(struct pci_dev *dev, void *data)
 {
 	bool enable = *((bool *)data);
 
@@ -124,6 +124,8 @@ static void set_device_error_reporting(s
 
 	if (enable)
 		pcie_set_ecrc_checking(dev);
+
+	return 0;
 }
 
 /**
@@ -207,7 +209,7 @@ static struct device* find_source_device
 	return NULL;
 }
 
-static void report_error_detected(struct pci_dev *dev, void *data)
+static int report_error_detected(struct pci_dev *dev, void *data)
 {
 	pci_ers_result_t vote;
 	struct pci_error_handlers *err_handler;
@@ -232,16 +234,16 @@ static void report_error_detected(struct
 				   dev->driver ?
 				   "no AER-aware driver" : "no driver");
 		}
-		return;
+		return 0;
 	}
 
 	err_handler = dev->driver->err_handler;
 	vote = err_handler->error_detected(dev, result_data->state);
 	result_data->result = merge_result(result_data->result, vote);
-	return;
+	return 0;
 }
 
-static void report_mmio_enabled(struct pci_dev *dev, void *data)
+static int report_mmio_enabled(struct pci_dev *dev, void *data)
 {
 	pci_ers_result_t vote;
 	struct pci_error_handlers *err_handler;
@@ -251,15 +253,15 @@ static void report_mmio_enabled(struct p
 	if (!dev->driver ||
 		!dev->driver->err_handler ||
 		!dev->driver->err_handler->mmio_enabled)
-		return;
+		return 0;
 
 	err_handler = dev->driver->err_handler;
 	vote = err_handler->mmio_enabled(dev);
 	result_data->result = merge_result(result_data->result, vote);
-	return;
+	return 0;
 }
 
-static void report_slot_reset(struct pci_dev *dev, void *data)
+static int report_slot_reset(struct pci_dev *dev, void *data)
 {
 	pci_ers_result_t vote;
 	struct pci_error_handlers *err_handler;
@@ -269,15 +271,15 @@ static void report_slot_reset(struct pci
 	if (!dev->driver ||
 		!dev->driver->err_handler ||
 		!dev->driver->err_handler->slot_reset)
-		return;
+		return 0;
 
 	err_handler = dev->driver->err_handler;
 	vote = err_handler->slot_reset(dev);
 	result_data->result = merge_result(result_data->result, vote);
-	return;
+	return 0;
 }
 
-static void report_resume(struct pci_dev *dev, void *data)
+static int report_resume(struct pci_dev *dev, void *data)
 {
 	struct pci_error_handlers *err_handler;
 
@@ -286,11 +288,11 @@ static void report_resume(struct pci_dev
 	if (!dev->driver ||
 		!dev->driver->err_handler ||
 		!dev->driver->err_handler->resume)
-		return;
+		return 0;
 
 	err_handler = dev->driver->err_handler;
 	err_handler->resume(dev);
-	return;
+	return 0;
 }
 
 /**
@@ -307,7 +309,7 @@ static void report_resume(struct pci_dev
 static pci_ers_result_t broadcast_error_message(struct pci_dev *dev,
 	enum pci_channel_state state,
 	char *error_mesg,
-	void (*cb)(struct pci_dev *, void *))
+	int (*cb)(struct pci_dev *, void *))
 {
 	struct aer_broadcast_data result_data;
 
include/linux/pci.h +1 -1
diff -Nraup linux-2.6_next/include/linux/pci.h linux-2.6_next_pciwalk/include/linux/pci.h
@@ -789,7 +789,7 @@ const struct pci_device_id *pci_match_id
 int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max,
 		    int pass);
 
-void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *),
+void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
 		  void *userdata);
 int pci_cfg_space_size_ext(struct pci_dev *dev);
 int pci_cfg_space_size(struct pci_dev *dev);
Reviewed-by on v4 1/3
#1 lore raw
Quoted 33 lines · Yanmin

Anyone could help me test it on powerpc? Or at least a compilation to see there is any compiling error/warning. I have no powerpc machine. Thanks.

Changelog V4:

	Port the patches to Jesses' linux-next tree (mostly based on
	2.6.30).

Changelog V3:
1) Probe devices under the root port when the bus id of the source id is equal to 0; V2 does so when device id is equal to 0;
2) Add more comments on critical path of finding devices.

Changelog V2:
Version 2 adds nosourceid, a boot parameter. When aerdriver.nosourceid=y, aerdriver doesn't use the source id saved by root port. Instead, it searches the device tree under the root port to find the reporter. So if hardware has errata and root port saves a bad source id, aerdriver still could find the reporter.
There are 2 scenarios under which aerdriver searches the device tree under root port:
1) nosourceid=n and error source id is equal to 0;
2) nosourceid=y.

Based on PCI Express AER specs, a root port might receive multiple TLP errors while it could only save a correctable error source id and an uncorrectable error source id at the same time. In addition, some root port hardware might be unable to provide a correct source id, i.e., the source id, or the bus id part of the source id provided by root port might be equal to 0.

Quoted 9 lines

The patchset implements the support in kernel by searching the device tree under the root port.

Patch 1 changes parameter cb of function pci_walk_bus to return a value. When cb return non-zero, pci_walk_bus stops more searching on the device tree.

Signed-off-by: Zhang Yanmin <[email protected]>

This one looks fine to me.

Quoted 316 lines

---

diff -Nraup linux-2.6_next/arch/powerpc/platforms/pseries/eeh_driver.c linux-2.6_next_pciwalk/arch/powerpc/platforms/pseries/eeh_driver.c

arch/powerpc/platforms/pseries/eeh_driver.c +24 -14
@@ -122,7 +122,7 @@ static void eeh_enable_irq(struct pci_de
  * passed back in "userdata".
  */
 
-static void eeh_report_error(struct pci_dev *dev, void *userdata)
+static int eeh_report_error(struct pci_dev *dev, void *userdata)
 {
 	enum pci_ers_result rc, *res = userdata;
 	struct pci_driver *driver = dev->driver;
@@ -130,19 +130,21 @@ static void eeh_report_error(struct pci_
 	dev->error_state = pci_channel_io_frozen;
 
 	if (!driver)
-		return;
+		return 0;
 
 	eeh_disable_irq(dev);
 
 	if (!driver->err_handler ||
 	    !driver->err_handler->error_detected)
-		return;
+		return 0;
 
 	rc = driver->err_handler->error_detected (dev, pci_channel_io_frozen);
 
 	/* A driver that needs a reset trumps all others */
 	if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
 	if (*res == PCI_ERS_RESULT_NONE) *res = rc;
+
+	return 0;
 }
 
 /**
@@ -153,7 +155,7 @@ static void eeh_report_error(struct pci_
  * Cumulative response passed back in "userdata".
  */
 
-static void eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata)
+static int eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata)
 {
 	enum pci_ers_result rc, *res = userdata;
 	struct pci_driver *driver = dev->driver;
@@ -161,26 +163,28 @@ static void eeh_report_mmio_enabled(stru
 	if (!driver ||
 	    !driver->err_handler ||
 	    !driver->err_handler->mmio_enabled)
-		return;
+		return 0;
 
 	rc = driver->err_handler->mmio_enabled (dev);
 
 	/* A driver that needs a reset trumps all others */
 	if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
 	if (*res == PCI_ERS_RESULT_NONE) *res = rc;
+
+	return 0;
 }
 
 /**
  * eeh_report_reset - tell device that slot has been reset
  */
 
-static void eeh_report_reset(struct pci_dev *dev, void *userdata)
+static int eeh_report_reset(struct pci_dev *dev, void *userdata)
 {
 	enum pci_ers_result rc, *res = userdata;
 	struct pci_driver *driver = dev->driver;
 
 	if (!driver)
-		return;
+		return 0;
 
 	dev->error_state = pci_channel_io_normal;
 
@@ -188,35 +192,39 @@ static void eeh_report_reset(struct pci_
 
 	if (!driver->err_handler ||
 	    !driver->err_handler->slot_reset)
-		return;
+		return 0;
 
 	rc = driver->err_handler->slot_reset(dev);
 	if ((*res == PCI_ERS_RESULT_NONE) ||
 	    (*res == PCI_ERS_RESULT_RECOVERED)) *res = rc;
 	if (*res == PCI_ERS_RESULT_DISCONNECT &&
 	     rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
+
+	return 0;
 }
 
 /**
  * eeh_report_resume - tell device to resume normal operations
  */
 
-static void eeh_report_resume(struct pci_dev *dev, void *userdata)
+static int eeh_report_resume(struct pci_dev *dev, void *userdata)
 {
 	struct pci_driver *driver = dev->driver;
 
 	dev->error_state = pci_channel_io_normal;
 
 	if (!driver)
-		return;
+		return 0;
 
 	eeh_enable_irq(dev);
 
 	if (!driver->err_handler ||
 	    !driver->err_handler->resume)
-		return;
+		return 0;
 
 	driver->err_handler->resume(dev);
+
+	return 0;
 }
 
 /**
@@ -226,22 +234,24 @@ static void eeh_report_resume(struct pci
  * dead, and that no further recovery attempts will be made on it.
  */
 
-static void eeh_report_failure(struct pci_dev *dev, void *userdata)
+static int eeh_report_failure(struct pci_dev *dev, void *userdata)
 {
 	struct pci_driver *driver = dev->driver;
 
 	dev->error_state = pci_channel_io_perm_failure;
 
 	if (!driver)
-		return;
+		return 0;
 
 	eeh_disable_irq(dev);
 
 	if (!driver->err_handler ||
 	    !driver->err_handler->error_detected)
-		return;
+		return 0;
 
 	driver->err_handler->error_detected(dev, pci_channel_io_perm_failure);
+
+	return 0;
 }
 
 /* ------------------------------------------------------- */

diff -Nraup linux-2.6_next/drivers/pci/bus.c linux-2.6_next_pciwalk/drivers/pci/bus.c

drivers/pci/bus.c +9 -2
@@ -206,13 +206,18 @@ void pci_enable_bridges(struct pci_bus *
  *  Walk the given bus, including any bridged devices
  *  on buses under this bus.  Call the provided callback
  *  on each device found.
+ *
+ *  We check the return of @cb each time. If it returns anything
+ *  other than 0, we break out.
+ *
  */
-void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *),
+void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
 		  void *userdata)
 {
 	struct pci_dev *dev;
 	struct pci_bus *bus;
 	struct list_head *next;
+	int retval;
 
 	bus = top;
 	down_read(&pci_bus_sem);
@@ -236,8 +241,10 @@ void pci_walk_bus(struct pci_bus *top, v
 
 		/* Run device routines with the device locked */
 		down(&dev->dev.sem);
-		cb(dev, userdata);
+		retval = cb(dev, userdata);
 		up(&dev->dev.sem);
+		if (retval)
+			break;
 	}
 	up_read(&pci_bus_sem);
 }

diff -Nraup linux-2.6_next/drivers/pci/pcie/aer/aerdrv_core.c linux-2.6_next_pciwalk/drivers/pci/pcie/aer/aerdrv_core.c

drivers/pci/pcie/aer/aerdrv_core.c +16 -14
@@ -109,7 +109,7 @@ int pci_cleanup_aer_correct_error_status
 #endif  /*  0  */
 
 
-static void set_device_error_reporting(struct pci_dev *dev, void *data)
+static int set_device_error_reporting(struct pci_dev *dev, void *data)
 {
 	bool enable = *((bool *)data);
 
@@ -124,6 +124,8 @@ static void set_device_error_reporting(s
 
 	if (enable)
 		pcie_set_ecrc_checking(dev);
+
+	return 0;
 }
 
 /**
@@ -207,7 +209,7 @@ static struct device* find_source_device
 	return NULL;
 }
 
-static void report_error_detected(struct pci_dev *dev, void *data)
+static int report_error_detected(struct pci_dev *dev, void *data)
 {
 	pci_ers_result_t vote;
 	struct pci_error_handlers *err_handler;
@@ -232,16 +234,16 @@ static void report_error_detected(struct
 				   dev->driver ?
 				   "no AER-aware driver" : "no driver");
 		}
-		return;
+		return 0;
 	}
 
 	err_handler = dev->driver->err_handler;
 	vote = err_handler->error_detected(dev, result_data->state);
 	result_data->result = merge_result(result_data->result, vote);
-	return;
+	return 0;
 }
 
-static void report_mmio_enabled(struct pci_dev *dev, void *data)
+static int report_mmio_enabled(struct pci_dev *dev, void *data)
 {
 	pci_ers_result_t vote;
 	struct pci_error_handlers *err_handler;
@@ -251,15 +253,15 @@ static void report_mmio_enabled(struct p
 	if (!dev->driver ||
 		!dev->driver->err_handler ||
 		!dev->driver->err_handler->mmio_enabled)
-		return;
+		return 0;
 
 	err_handler = dev->driver->err_handler;
 	vote = err_handler->mmio_enabled(dev);
 	result_data->result = merge_result(result_data->result, vote);
-	return;
+	return 0;
 }
 
-static void report_slot_reset(struct pci_dev *dev, void *data)
+static int report_slot_reset(struct pci_dev *dev, void *data)
 {
 	pci_ers_result_t vote;
 	struct pci_error_handlers *err_handler;
@@ -269,15 +271,15 @@ static void report_slot_reset(struct pci
 	if (!dev->driver ||
 		!dev->driver->err_handler ||
 		!dev->driver->err_handler->slot_reset)
-		return;
+		return 0;
 
 	err_handler = dev->driver->err_handler;
 	vote = err_handler->slot_reset(dev);
 	result_data->result = merge_result(result_data->result, vote);
-	return;
+	return 0;
 }
 
-static void report_resume(struct pci_dev *dev, void *data)
+static int report_resume(struct pci_dev *dev, void *data)
 {
 	struct pci_error_handlers *err_handler;
 
@@ -286,11 +288,11 @@ static void report_resume(struct pci_dev
 	if (!dev->driver ||
 		!dev->driver->err_handler ||
 		!dev->driver->err_handler->resume)
-		return;
+		return 0;
 
 	err_handler = dev->driver->err_handler;
 	err_handler->resume(dev);
-	return;
+	return 0;
 }
 
 /**
@@ -307,7 +309,7 @@ static void report_resume(struct pci_dev
 static pci_ers_result_t broadcast_error_message(struct pci_dev *dev,
 	enum pci_channel_state state,
 	char *error_mesg,
-	void (*cb)(struct pci_dev *, void *))
+	int (*cb)(struct pci_dev *, void *))
 {
 	struct aer_broadcast_data result_data;
 

diff -Nraup linux-2.6_next/include/linux/pci.h linux-2.6_next_pciwalk/include/linux/pci.h

include/linux/pci.h +1 -2
@@ -789,7 +789,7 @@ const struct pci_device_id *pci_match_id
 int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max,
 		    int pass);
 
-void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *),
+void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
 		  void *userdata);
 int pci_cfg_space_size_ext(struct pci_dev *dev);
 int pci_cfg_space_size(struct pci_dev *dev);
 
 
--

To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Signature · 2 lines
Andrew Patterson
Hewlett-Packard
#2 lore raw
Quoted 41 lines · Andrew Patterson
Quoted 40 lines · Yanmin

Anyone could help me test it on powerpc? Or at least a compilation to see there is any compiling error/warning. I have no powerpc machine. Thanks.

Changelog V4:

	Port the patches to Jesses' linux-next tree (mostly based on
	2.6.30).

Changelog V3:
1) Probe devices under the root port when the bus id of the source id is equal to 0; V2 does so when device id is equal to 0;
2) Add more comments on critical path of finding devices.

Changelog V2:
Version 2 adds nosourceid, a boot parameter. When aerdriver.nosourceid=y, aerdriver doesn't use the source id saved by root port. Instead, it searches the device tree under the root port to find the reporter. So if hardware has errata and root port saves a bad source id, aerdriver still could find the reporter.
There are 2 scenarios under which aerdriver searches the device tree under root port:
1) nosourceid=n and error source id is equal to 0;
2) nosourceid=y.

Based on PCI Express AER specs, a root port might receive multiple TLP errors while it could only save a correctable error source id and an uncorrectable error source id at the same time. In addition, some root port hardware might be unable to provide a correct source id, i.e., the source id, or the bus id part of the source id provided by root port might be equal to 0.

The patchset implements the support in kernel by searching the device tree under the root port.

Patch 1 changes parameter cb of function pci_walk_bus to return a value. When cb return non-zero, pci_walk_bus stops more searching on the device tree.

Quoted 6 lines
Quoted 2 lines

Signed-off-by: Zhang Yanmin <[email protected]>

This one looks fine to me.

Thanks for helping review the patches.

Yanmin