Skip to contentSkip to conversation

powerpc/mpc85xx: Create dts for each core in CAMP mode for P2020DS

PATCH New Yang Shi 1 participant 1 message Jun 25, 2009

Subsystems (2)
lore
Share & tools
lore

Yang Shi

author
#0 lore raw

PATCH 1/1 powerpc/mpc85xx: Create dts for each core in CAMP mode for P2020DS

Create the dts files for each core and splits the devices between the two cores for P2020DS.

Resource partitioning follows the example set by MPC8572, with a shared MIPC using protected resources, and with the remaining resources divided as follows:

core0: memory, L2, i2c, dma1, global-util, eth0, eth1, crypto, pci0,
pci1, usb, spi, sdhci.
core1: L2, dma2, eth2, pci2, msi.

Based on MPC8572DS CAMP dts files.
(commit 361425fc32422c9716fc69e52455b7d44fc02c18)

---
 arch/powerpc/boot/dts/p2020ds_camp_core0.dts |  457 ++++++++++++++++++++++++++
 arch/powerpc/boot/dts/p2020ds_camp_core1.dts |  209 ++++++++++++
 2 files changed, 666 insertions(+), 0 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/p2020ds_camp_core0.dts
 create mode 100644 arch/powerpc/boot/dts/p2020ds_camp_core1.dts
arch/powerpc/boot/dts/p2020ds_camp_core0.dts new file +457 -0
new file mode 100644
index 0000000..5d74a9c
@@ -0,0 +1,457 @@
+/*
+ * P2020 DS Core0 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts file allows core0 to have memory, l2, i2c, dma1, global-util, eth0,
+ * eth1, crypto, usb, spi, sdhci, pci0, pci1.
+ *
+ * Copyright 2009 Wind River Systems Inc.
+ *
+ * Based largely on the P2020DS SMP and MPC8572DS CAMP DTS which are:
+ *
+ *    Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "fsl,P2020";
+	compatible = "fsl,P2020DS", "fsl,MPC8572DS-CAMP";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P2020@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	soc@ffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p2020-immr", "simple-bus";
+		ranges = <0x0 0xffe00000 0x100000>;
+		bus-frequency = <0>;            // Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,p2020-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,p2020-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					interrupts = <3 1>;
+					reg = <0x0>;
+				};
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <3 1>;
+					reg = <0x1>;
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+		};
+
+		spi@7000 {
+			compatible = "fsl,mpc8536-espi", "fsl,espi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7000 0x1000>;
+			interrupts = <59 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		gpio: gpio-controller@f000 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x100>;
+			interrupts = <47 0x2>;
+			interrupt-parent = <&mpic>;
+			gpio-controller;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p2020-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>; // 32 bytes
+			cache-size = <0x80000>; // L2, 512k
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x22000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+		sdhci@2e000 {
+			compatible = "fsl,mpc8536-esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xbfe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+			protected-sources = <
+			31 32 33 26 42 /* eth2 pci2 serial */
+			76 77 78 79 /* dma2 */
+			0xe0 0xe1 0xe2 0xe3 /* msi */
+			0xe4 0xe5 0xe6 0xe7
+			>;    	
+		};
+
+		global-utilities@e0000 {        //global utilities block
+			compatible = "fsl,p2020-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+	};
+
+	pci0: pcie@ffe08000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xffe08000 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xffc00000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x8 0x1
+			0000 0x0 0x0 0x2 &mpic 0x9 0x1
+			0000 0x0 0x0 0x3 &mpic 0xa 0x1
+			0000 0x0 0x0 0x4 &mpic 0xb 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci1: pcie@ffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xffe09000 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xffc10000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			// IDSEL 0x11 func 0 - PCI slot 1
+			0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8800 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 1 - PCI slot 1
+			0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8900 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 2 - PCI slot 1
+			0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 3 - PCI slot 1
+			0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 4 - PCI slot 1
+			0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 5 - PCI slot 1
+			0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 6 - PCI slot 1
+			0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 7 - PCI slot 1
+			0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x1d  Audio
+			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+			// IDSEL 0x1e Legacy
+			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+			// IDSEL 0x1f IDE/SATA
+			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+ 			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+			>;
+
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+			uli1575@0 {
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				#size-cells = <2>;
+				#address-cells = <3>;
+				ranges = <0x2000000 0x0 0xa0000000
+					  0x2000000 0x0 0xa0000000
+					  0x0 0x20000000
+
+					  0x1000000 0x0 0x0
+					  0x1000000 0x0 0x0
+					  0x0 0x10000>;
+				isa@1e {
+					device_type = "isa";
+					#interrupt-cells = <2>;
+					#size-cells = <1>;
+					#address-cells = <2>;
+					reg = <0xf000 0x0 0x0 0x0 0x0>;
+					ranges = <0x1 0x0 0x1000000 0x0 0x0
+						  0x1000>;
+					interrupt-parent = <&i8259>;
+
+					i8259: interrupt-controller@20 {
+						reg = <0x1 0x20 0x2
+						       0x1 0xa0 0x2
+						       0x1 0x4d0 0x2>;
+						interrupt-controller;
+						device_type = "interrupt-controller";
+						#address-cells = <0>;
+						#interrupt-cells = <2>;
+						compatible = "chrp,iic";
+						interrupts = <4 1>;
+						interrupt-parent = <&mpic>;
+					};
+
+					i8042@60 {
+						#size-cells = <0>;
+						#address-cells = <1>;
+						reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+						interrupts = <1 3 12 3>;
+						interrupt-parent = <&i8259>;
+
+						keyboard@0 {
+							reg = <0x0>;
+							compatible = "pnpPNP,303";
+						};
+
+						mouse@1 {
+							reg = <0x1>;
+							compatible = "pnpPNP,f03";
+						};
+					};
+
+					rtc@70 {
+						compatible = "pnpPNP,b00";
+						reg = <0x1 0x70 0x2>;
+					};
+
+					gpio@400 {
+						reg = <0x1 0x400 0x80>;
+					};
+				};
+			};
+		};
+
+	};
+};
arch/powerpc/boot/dts/p2020ds_camp_core1.dts new file +209 -0

209 lines not on this page · raw message

Signature · 1 line
1.6.0.4