lpfc 8.3.4: Remove spaces before newlines in several log messages
Subsystems (2)
PATCH 7/8 lpfc 8.3.4: Remove spaces before newlines in several log messages
Remove spaces before newlines in several log messages
Signed-off-by James Smart <[email protected]>
---
drivers/scsi/lpfc/lpfc_hbadisc.c | 2 +- drivers/scsi/lpfc/lpfc_init.c | 10 +++++----- drivers/scsi/lpfc/lpfc_mbox.c | 2 +- drivers/scsi/lpfc/lpfc_scsi.c | 6 +++--- drivers/scsi/lpfc/lpfc_sli.c | 4 ++-- drivers/scsi/lpfc/lpfc_vport.c | 2 +- 6 files changed, 13 insertions(+), 13 deletions(-)
drivers/scsi/lpfc/lpfc_hbadisc.c +1 -1
@@ -2402,7 +2402,7 @@ lpfc_create_static_vport(struct lpfc_hba *phba)if (!new_fc_vport) {lpfc_printf_log (phba,KERN_WARNING ,LOG_INIT ,"0546 lpfc_create_static_vport failed to" -" create vport \n" ); +" create vport\n" );continue ; }
drivers/scsi/lpfc/lpfc_init.c +5 -5
@@ -580,7 +580,7 @@ lpfc_config_port_post(struct lpfc_hba *phba)KERN_ERR ,LOG_INIT ,"0456 Adapter failed to issue " -"ASYNCEVT_ENABLE mbox status x%x \n." , +"ASYNCEVT_ENABLE mbox status x%x\n" , rc);mempool_free (pmb, phba->mbox_mem_pool); }
@@ -594,7 +594,7 @@ lpfc_config_port_post(struct lpfc_hba *phba)if ((rc !=MBX_BUSY ) && (rc !=MBX_SUCCESS )) {lpfc_printf_log (phba,KERN_ERR ,LOG_INIT ,"0435 Adapter failed " -"to get Option ROM version status x%x\n." , rc); +"to get Option ROM version status x%x\n" , rc);mempool_free (pmb, phba->mbox_mem_pool); }
@@ -2923,7 +2923,7 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,switch (event_type) {case LPFC_FCOE_EVENT_TYPE_NEW_FCF :lpfc_printf_log (phba,KERN_ERR ,LOG_DISCOVERY , -"2546 New FCF found index 0x%x tag 0x%x \n" , +"2546 New FCF found index 0x%x tag 0x%x\n" , acqe_fcoe->fcf_index, acqe_fcoe->event_tag);/*
@@ -2949,7 +2949,7 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,case LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL :lpfc_printf_log (phba,KERN_ERR ,LOG_SLI , -"2548 FCF Table full count 0x%x tag 0x%x \n" , +"2548 FCF Table full count 0x%x tag 0x%x\n" ,bf_get (lpfc_acqe_fcoe_fcf_count, acqe_fcoe), acqe_fcoe->event_tag);break ;
@@ -2957,7 +2957,7 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,case LPFC_FCOE_EVENT_TYPE_FCF_DEAD :lpfc_printf_log (phba,KERN_ERR ,LOG_DISCOVERY ,"2549 FCF disconnected fron network index 0x%x" -" tag 0x%x \n" , acqe_fcoe->fcf_index, +" tag 0x%x\n" , acqe_fcoe->fcf_index, acqe_fcoe->event_tag);/* If the event is not for currently used fcf do nothing */ if (phba->fcf.fcf_indx != acqe_fcoe->fcf_index)
drivers/scsi/lpfc/lpfc_mbox.c +1 -1
@@ -1893,7 +1893,7 @@ lpfc_dump_fcoe_param(struct lpfc_hba *phba,/* dump_fcoe_param failed to allocate memory */ lpfc_printf_log (phba,KERN_WARNING ,LOG_MBOX ,"2569 lpfc_dump_fcoe_param: memory" -" allocation failed \n" ); +" allocation failed\n" );return 1 ; }
drivers/scsi/lpfc/lpfc_scsi.c +3 -3
@@ -2142,7 +2142,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, }else if (resp_info &RESID_OVER ) {lpfc_printf_vlog (vport,KERN_WARNING ,LOG_FCP ,"9028 FCP command x%x residual overrun error. " -"Data: x%x x%x \n" , cmnd->cmnd[0 ], +"Data: x%x x%x\n" , cmnd->cmnd[0 ],scsi_bufflen (cmnd),scsi_get_resid (cmnd)); host_status =DID_ERROR ;
@@ -2843,7 +2843,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) dif_op_str[scsi_get_prot_op(cmnd)]); lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, "9034 BLKGRD: CDB: %02x %02x %02x %02x %02x " - "%02x %02x %02x %02x %02x \n", + "%02x %02x %02x %02x %02x\n", cmnd->cmnd[0], cmnd->cmnd[1], cmnd->cmnd[2], cmnd->cmnd[3], cmnd->cmnd[4], cmnd->cmnd[5], cmnd->cmnd[6], cmnd->cmnd[7], cmnd->cmnd[8],
@@ -2871,7 +2871,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) dif_op_str[scsi_get_prot_op(cmnd)]); lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, "9039 BLKGRD: CDB: %02x %02x %02x %02x %02x " - "%02x %02x %02x %02x %02x \n", + "%02x %02x %02x %02x %02x\n", cmnd->cmnd[0], cmnd->cmnd[1], cmnd->cmnd[2], cmnd->cmnd[3], cmnd->cmnd[4], cmnd->cmnd[5], cmnd->cmnd[6], cmnd->cmnd[7], cmnd->cmnd[8],
drivers/scsi/lpfc/lpfc_sli.c +2 -2
@@ -4304,7 +4304,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)*/ if (lpfc_sli4_read_fcoe_params (phba, mboxq))lpfc_printf_log (phba,KERN_ERR ,LOG_MBOX |LOG_INIT , -"2570 Failed to read FCoE parameters \n" ); +"2570 Failed to read FCoE parameters\n" );/* Issue READ_REV to collect vpd and FW information. */ vpd_size =PAGE_SIZE ;
@@ -6326,7 +6326,7 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba,KERN_ERR ,LOG_SLI ,"0346 Ring %d handler: unexpected ASYNC_STATUS" -" evt_code 0x%x \n" +" evt_code 0x%x\n" "W0 0x%08x W1 0x%08x W2 0x%08x W3 0x%08x\n" "W4 0x%08x W5 0x%08x W6 0x%08x W7 0x%08x\n" "W8 0x%08x W9 0x%08x W10 0x%08x W11 0x%08x\n"
drivers/scsi/lpfc/lpfc_vport.c +1 -1
@@ -668,7 +668,7 @@ lpfc_vport_delete(struct fc_vport *fc_vport)lpfc_printf_log (vport->phba,KERN_WARNING ,LOG_VPORT ,"1829 CT command failed to " -"delete objects on fabric. \n" ); +"delete objects on fabric\n" ); }/* First look for the Fabric ndlp */ ndlp =lpfc_findnode_did (vport, Fabric_DID);