mm: reorder balance_dirty_pages to improve (some) write performance
Subsystems (2)
RFC PATCH 1/1 mm: reorder balance_dirty_pages to improve (some) write performance
Reorder balance_dirty_pages to do less work in the default case & improve write performance in some cases.
Running simple fio mmap write tests on x86_64 with 3gb of memory on 2.6.31-rc3 where each test was run 10 times, dropping the slowest & fastest results the average write speeds are
size rc3 | +patch difference
MiB/s (s.d.)
400m 374.75 ( 8.15) | 382.575 ( 8.24) + 7.825 500m 363.625 (10.91) | 378.375 (10.86) +14.75 600m 308.875 (10.86) | 374.25 ( 7.91) +65.375 700m 188 ( 4.75) | 209 ( 7.23) +21 800m 140.375 ( 2.56) | 154.5 ( 2.98) +14.275 900m 124.875 ( 0.99) | 125.5 ( 9.62) +0.625
This patch helps write performance when the test size is close to the allowed number of dirty pages (approx 600m on this machine). Once the test size becomes larger than 900m there is no significant difference.
----
This change only make a difference to workloads where the number of dirty pages is close to (dirty_ratio * memory size). Once a test writes more than that the speed of the disk is the most important factor so any effect of this patch is lost.
I've only tried this on my desktop, so it really needs testing on different hardware.
Does anyone feel like trying it ?
regards
Richard
mm/page-writeback.c +11 -13
@@ -514,23 +514,26 @@ static void balance_dirty_pages(struct address_space *mapping)get_dirty_limits (&background_thresh, &dirty_thresh, &bdi_thresh, bdi); - nr_reclaimable =global_page_state (NR_FILE_DIRTY ) + -global_page_state (NR_UNSTABLE_NFS ); - nr_writeback =global_page_state (NR_WRITEBACK ); - bdi_nr_reclaimable =bdi_stat (bdi,BDI_RECLAIMABLE ); bdi_nr_writeback =bdi_stat (bdi,BDI_WRITEBACK ); -if (bdi_nr_reclaimable + bdi_nr_writeback <= bdi_thresh) + nr_reclaimable =global_page_state (NR_FILE_DIRTY ) + +global_page_state (NR_UNSTABLE_NFS ); + +if (bdi_nr_reclaimable + bdi_nr_writeback <= bdi_thresh) { +if (bdi->dirty_exceeded) + bdi->dirty_exceeded =0 ;break ; + } + nr_writeback =global_page_state (NR_WRITEBACK );/* * Throttle it only when the background writeback cannot * catch-up. This avoids (excessively) small writeouts * when the bdi limits are ramping up. */ if (nr_reclaimable + nr_writeback < - (background_thresh + dirty_thresh) /2 ) + (background_thresh + dirty_thresh) /2 )break ;if (!bdi->dirty_exceeded)
@@ -578,10 +581,6 @@ static void balance_dirty_pages(struct address_space *mapping)congestion_wait (BLK_RW_ASYNC ,HZ /10 ); } -if (bdi_nr_reclaimable + bdi_nr_writeback < bdi_thresh && - bdi->dirty_exceeded) - bdi->dirty_exceeded =0 ; -if (writeback_in_progress (bdi))return ;/* pdflush is already working this queue */
@@ -594,9 +593,8 @@ static void balance_dirty_pages(struct address_space *mapping)* background_thresh, to keep the amount of dirty memory low. */ if ((laptop_mode && pages_written) || - (!laptop_mode && (global_page_state (NR_FILE_DIRTY ) - +global_page_state (NR_UNSTABLE_NFS ) - > background_thresh))) + (!laptop_mode && nr_reclaimable + > background_thresh))pdflush_operation (background_writeout,0 ); }
Andrew Morton
maintainerQuoted 26 lines · On Fri, 24 Jul 2009 15:28:37 +0100 Richard Kennedy <[email protected]>…
Reorder
balance_dirty_pagesto do less work in the default case & improve write performance in some cases.Running simple fio mmap write tests on
x86_64with 3gb of memory on 2.6.31-rc3 where each test was run 10 times, dropping the slowest & fastest results the average write speeds aresize rc3 | +patch difference
MiB/s (s.d.)400m 374.75 ( 8.15) | 382.575 ( 8.24) + 7.825 500m 363.625 (10.91) | 378.375 (10.86) +14.75 600m 308.875 (10.86) | 374.25 ( 7.91) +65.375 700m 188 ( 4.75) | 209 ( 7.23) +21 800m 140.375 ( 2.56) | 154.5 ( 2.98) +14.275 900m 124.875 ( 0.99) | 125.5 ( 9.62) +0.625This patch helps write performance when the test size is close to the allowed number of dirty pages (approx 600m on this machine). Once the test size becomes larger than 900m there is no significant difference.
Signed-off-by Richard Kennedy <[email protected]>----
Quoted 7 lines
This change only make a difference to workloads where the number of dirty pages is close to (
dirty_ratio* memory size). Once a test writes more than that the speed of the disk is the most important factor so any effect of this patch is lost.
I've only tried this on my desktop, so it really needs testing on different hardware.
Does anyone feel like trying it ?
So what does the patch actually do?
AFACIT the main change is to move this:
if (bdi->dirty_exceeded) bdi->dirty_exceeded = 0;
from after the loop and into the body of the loop.
So that we no longer clear dirty_exceeded in the three other places where we break out of the loop.
IOW, dirty_exceeded can be left true (even if it shouldn't be?) on exit from balance_dirty_pages().
What was the rationale for leaving dirty_exceeded true in those cases, and why did it speed up that workload?
Thanks.
Quoted 49 lines · Andrew Morton
Quoted 26 lines · On Fri, 24 Jul 2009 15:28:37 +0100 Richard Kennedy <[email protected]>…
Reorder
balance_dirty_pagesto do less work in the default case & improve write performance in some cases.Running simple fio mmap write tests on
x86_64with 3gb of memory on 2.6.31-rc3 where each test was run 10 times, dropping the slowest & fastest results the average write speeds aresize rc3 | +patch difference
MiB/s (s.d.)400m 374.75 ( 8.15) | 382.575 ( 8.24) + 7.825 500m 363.625 (10.91) | 378.375 (10.86) +14.75 600m 308.875 (10.86) | 374.25 ( 7.91) +65.375 700m 188 ( 4.75) | 209 ( 7.23) +21 800m 140.375 ( 2.56) | 154.5 ( 2.98) +14.275 900m 124.875 ( 0.99) | 125.5 ( 9.62) +0.625This patch helps write performance when the test size is close to the allowed number of dirty pages (approx 600m on this machine). Once the test size becomes larger than 900m there is no significant difference.
Signed-off-by Richard Kennedy <[email protected]>----
Quoted 7 lines
This change only make a difference to workloads where the number of dirty pages is close to (
dirty_ratio* memory size). Once a test writes more than that the speed of the disk is the most important factor so any effect of this patch is lost.
I've only tried this on my desktop, so it really needs testing on different hardware.
Does anyone feel like trying it ?So what does the patch actually do?
AFACIT the main change is to move this:
if (bdi->dirty_exceeded) bdi->dirty_exceeded = 0;from after the loop and into the body of the loop.
So that we no longer clear
dirty_exceededin the three other places where we break out of the loop.
Quoted 7 lines
IOW,
dirty_exceededcan be left true (even if it shouldn't be?) on exit frombalance_dirty_pages().What was the rationale for leaving
dirty_exceededtrue in those cases, and why did it speed up that workload?Thanks.
Hi Andrew,
The main intent was to reduce the number of times that global_page_state gets called as the counters are in a v. hot cacheline, see the perf stats below.
I added the changes to the dirty_exceeded as a bit of an afterthought, I guess I should drop them.
But to answer your question, in general calling writeback_inodes will just move some pages from dirty to writeback so the total will stay about the same, so we exit with the same dirty_exceeded state without having to check it again.
However, it could get dirty_exceed wrong if it gets pre-empted or stalled and enough pages get removed from writeback, but balance_dirty_limits_ratelimited will call it again after 8 new pages are dirtied and we'll get another chance to get it right!
I'll drop the dirty_exceed change & re-test just the global_page_state stuff.
regards
Richard
typical numbers from perf stat
2.6.31-rc4
Performance counter stats for 'fio ./mm-sz2/t2.fio':
2387.447419 task-clock-msecs # 0.480 CPUs
498 context-switches # 0.000 M/sec
1 CPU-migrations # 0.000 M/sec
155070 page-faults # 0.065 M/sec
4703977113 cycles # 1970.296 M/sec
971788179 instructions # 0.207 IPC
509718907 cache-references # 213.500 M/sec
8928883 cache-misses # 3.740 M/sec4.971956711 seconds time elapsed
2.6.31-rc4 + patch
Performance counter stats for 'fio ./mm-sz2/t2.fio':
2116.794967 task-clock-msecs # 0.648 CPUs
383 context-switches # 0.000 M/sec
1 CPU-migrations # 0.000 M/sec
155048 page-faults # 0.073 M/sec
4792565245 cycles # 2264.067 M/sec
967653864 instructions # 0.202 IPC
473096290 cache-references # 223.497 M/sec
8723087 cache-misses # 4.121 M/sec3.269128919 seconds time elapsed