ppc4xx: Kilauea: Fix SDRAM init in NAND booting version
PATCH 1/1 ppc4xx: Kilauea: Fix SDRAM init in NAND booting version
DDR2 Auto-calibration needs to be disabled on the NAND booting PPC4xx targets. Otherwise the configured fixed init values for some DDR2 controller registers (e.g. RQDC) are not initialized at all resulting in a non working SDRAM.
--- include/configs/kilauea.h | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
include/configs/kilauea.h +2 -0
@@ -236,9 +236,11 @@* * DDR Autocalibration Method_B is the default. */ +#if !defined(CONFIG_NAND_U_BOOT ) && !defined(CONFIG_NAND_SPL )#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION/* IBM DDR autocalibration */ #define DEBUG_PPC4xx_DDR_AUTOCALIBRATION/* dynamic DDR autocal debug */ #undef CONFIG_PPC4xx_DDR_METHOD_A +#endif #define CONFIG_SYS_SDRAM0_MB0CF_BASE (( 0 << 20) + CONFIG_SYS_SDRAM_BASE)
Signature · 1 line
1.6.3.3
Stefan Roese
AppliedPATCH 1/1 ppc4xx: Kilauea: Fix SDRAM init in NAND booting version
Quoted 6 lines · On Monday 27 July 2009 07:42:37 Stefan Roese wrote:
DDR2 Auto-calibration needs to be disabled on the NAND booting PPC4xx targets. Otherwise the configured fixed init values for some DDR2 controller registers (e.g. RQDC) are not initialized at all resulting in a non working SDRAM.
Signed-off-by Stefan Roese <[email protected]>
Applied to ppc4xx/master. Thanks.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================