ppc4xx: Add some NAND-booting bootstrap entries to Kilauea chip_config cmd
PATCH 1/1 ppc4xx: Add some NAND-booting bootstrap entries to Kilauea chip_config cmd
This patch adds some I2C bootstrap setting for NAND booting to the Kilauea chip_config command ("533-nand" and "600-nand").
Additionally some incorrectly indented lines are fixed.
--- board/amcc/kilauea/chip_config.c | 24 ++++++++++++++++++++---- 1 files changed, 20 insertions(+), 4 deletions(-)
board/amcc/kilauea/chip_config.c +20 -4
@@ -25,6 +25,8 @@#include <common.h> #include <asm/ppc4xx_config.h> +/* NAND booting versions differ in bytes: 6, 8, 9, 11, 12 */ +struct ppc4xx_config ppc4xx_config_val[] = { {"333-nor" ,"NOR CPU: 333 PLB: 166 OPB: 83 EBC: 83" ,
@@ -49,10 +51,17 @@ struct ppc4xx_config ppc4xx_config_val[] = { }, {"533-nor" ,"NOR CPU: 533 PLB: 177 OPB: 88 EBC: 88" , - { -0x8e ,0x43 ,0x60 ,0x13 ,0x98 ,0x00 ,0x0a ,0x00 , -0x40 ,0x08 ,0x23 ,0x50 ,0x00 ,0x05 ,0x00 ,0x00 - } + { +0x8e ,0x43 ,0x60 ,0x13 ,0x98 ,0x00 ,0x0a ,0x00 , +0x40 ,0x08 ,0x23 ,0x50 ,0x00 ,0x05 ,0x00 ,0x00 + } + }, + { +"533-nand" ,"NOR CPU: 533 PLB: 177 OPB: 88 EBC: 88" , + { +0x8e ,0x43 ,0x60 ,0x13 ,0x98 ,0x00 ,0x0f ,0x00 , +0xa0 ,0x68 ,0x23 ,0x58 ,0x0d ,0x05 ,0x00 ,0x00 + } }, { "600-nor", "NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100",
@@ -62,6 +71,13 @@ struct ppc4xx_config ppc4xx_config_val[] = { } }, { +"600-nand" ,"NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100" , + { +0x8d ,0x02 ,0x34 ,0x13 ,0x98 ,0x00 ,0x0f ,0x00 , +0xa0 ,0x68 ,0x23 ,0x58 ,0x0d ,0x05 ,0x00 ,0x00 + } + }, + {"666-nor" ,"NOR CPU: 666 PLB: 222 OPB: 111 EBC: 111" , { 0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00,
Signature · 1 line
1.6.3.3
Stefan Roese
AppliedPATCH 1/1 ppc4xx: Add some NAND-booting bootstrap entries to Kilauea chip_config cmd
Quoted 6 lines · On Monday 27 July 2009 07:42:48 Stefan Roese wrote:
This patch adds some I2C bootstrap setting for NAND booting to the Kilauea
chip_configcommand ("533-nand" and "600-nand").Additionally some incorrectly indented lines are fixed.
Signed-off-by Stefan Roese <[email protected]>
Applied to ppc4xx/master. Thanks.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================