iwlwifi: debugFs to enable/disable HT40 support
PATCH v2 12/14 iwlwifi: debugFs to enable/disable HT40 support
From: Wey-Yi Guy <[email protected]>
Add debugfs file to enable/disable HT40(40MHz) channel support. By default, 40MHz is supported if AP can support the function.
By echo "1" to "disable_ht40_mode" file, iwlwifi driver will disable the 40MHz support and only allow 20MHz channel.
Because the information exchange happen during association time, so enable/disable fat channel only can be performed when it is not associated with AP.
---
v2: namene change from "fat" to "HT40"
--- drivers/net/wireless/iwlwifi/iwl-core.c | 4 ++ drivers/net/wireless/iwlwifi/iwl-debug.h | 1 + drivers/net/wireless/iwlwifi/iwl-debugfs.c | 46 ++++++++++++++++++++++++++++ drivers/net/wireless/iwlwifi/iwl-dev.h | 1 + 4 files changed, 52 insertions(+), 0 deletions(-)
(quoted diff) +0 -0
b/drivers/net/wireless/iwlwifi/iwl-core.c
index 710dd41..a4be19e 100644
drivers/net/wireless/iwlwifi/iwl-core.c +4 -0
@@ -632,6 +632,10 @@ u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv,if (!sta_ht_inf->ht_supported)return 0 ; } +#ifdef CONFIG_IWLWIFI_DEBUG +if (priv->disable_ht40) +return 0 ; +#endif return iwl_is_channel_extension (priv, priv->band,le16_to_cpu (priv->staging_rxon.channel), iwl_ht_conf->extension_chan_offset);
(quoted diff) +0 -0
b/drivers/net/wireless/iwlwifi/iwl-debug.h
index 609a681..8aa93f2 100644
drivers/net/wireless/iwlwifi/iwl-debug.h +1 -0
@@ -88,6 +88,7 @@ struct iwl_debugfs {#ifdef CONFIG_IWLWIFI_LEDS struct dentry *file_led;#endif +struct dentry *file_disable_ht40_mode; } dbgfs_data_files;struct dir_rf_files {struct dentry *file_disable_sensitivity;
(quoted diff) +0 -0
b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 748dc31..06113bb 100644
drivers/net/wireless/iwlwifi/iwl-debugfs.c +0 -0
@@ -653,6 +653,49 @@ static ssize_t
iwl_dbgfs_thermal_throttling_read(struct file *file,
return ret;
}
+static ssize_t iwl_dbgfs_disable_ht40_mode_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct iwl_priv *priv = file->private_data; + char buf[8]; + int buf_size; + int ht40_mode; + + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+ if (sscanf(buf, "%d", &ht40_mode) != 1)
+ return -EFAULT;
+ if (!iwl_is_associated(priv))
+ priv->disable_ht40 = ht40_mode ? true : false;
+ else {
+ IWL_ERR(priv, "Sta associated with AP - "
+ "Change fat mode is not allowed\n");
+ return -EINVAL;
+ }
+
+ return count;
+}
+
+static ssize_t iwl_dbgfs_disable_ht40_mode_read(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct iwl_priv *priv = (struct iwl_priv *)file->private_data; + char buf[100]; + int pos = 0; + const size_t bufsz = sizeof(buf); + ssize_t ret;
+
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "11n 40Mhz Mode: %s\n",
+ priv->disable_ht40 ? "Disabled" : "Enabled");
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+ return ret;
+}
+
DEBUGFS_READ_WRITE_FILE_OPS(sram);
DEBUGFS_WRITE_FILE_OPS(log_event);
DEBUGFS_READ_FILE_OPS(nvm);
@@ -667,6 +710,7 @@ DEBUGFS_READ_FILE_OPS(qos);
DEBUGFS_READ_FILE_OPS(led);
#endif
DEBUGFS_READ_FILE_OPS(thermal_throttling);
+DEBUGFS_READ_WRITE_FILE_OPS(disable_ht40_mode);
/*
* Create the debugfs files and directories
@@ -708,6 +752,7 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
DEBUGFS_ADD_FILE(led, data);
#endif
DEBUGFS_ADD_FILE(thermal_throttling, data);
+ DEBUGFS_ADD_FILE(disable_ht40_mode, data);
DEBUGFS_ADD_BOOL(disable_sensitivity, rf,
&priv->disable_sens_cal);
DEBUGFS_ADD_BOOL(disable_chain_noise, rf,
&priv->disable_chain_noise_cal);
@@ -747,6 +792,7 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv)
DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_led);
#endif
DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_thermal_throttling);
+ DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_disable_ht40_mode);
DEBUGFS_REMOVE(priv->dbgfs->dir_data);
DEBUGFS_REMOVE(priv->dbgfs->dbgfs_rf_files.file_disable_sensitivity);
DEBUGFS_REMOVE(priv->dbgfs->dbgfs_rf_files.file_disable_chain_noise);(quoted diff) +0 -0
b/drivers/net/wireless/iwlwifi/iwl-dev.h
index facbc3d..0ee3ad2 100644
drivers/net/wireless/iwlwifi/iwl-dev.h +1 -0
@@ -1164,6 +1164,7 @@ struct iwl_priv {/* debugging info */ u32 framecnt_to_us;atomic_t restrict_refcnt; +bool disable_ht40;#ifdef CONFIG_IWLWIFI_DEBUGFS /* debugfs */ struct iwl_debugfs *dbgfs;
Signature · 1 line
1.5.6.3
Quoted 8 lines · Wey-Yi
From: Wey-Yi Guy <[email protected]>
Add debugfs file to enable/disable HT40(40MHz) channel support. By default, 40MHz is supported if AP can support the function.
By echo "1" to "
disable_ht40_mode" file, iwlwifi driver will disable the 40MHz support and only allow 20MHz channel.
Quoted 8 lines
Because the information exchange happen during association time, so enable/disable fat channel only can be performed when it is not associated with AP.
Signed-off-by Wey-Yi Guy <[email protected]>Signed-off-by Reinette Chatre <[email protected]>---
v2: namene change from "fat" to "HT40"
This doesn't seem to apply whether or not I revert "iwlwifi: debugFs to enable/disable 40MHz channel support" before trying... What did you base it upon?
For the record, if you repost this please assume that I will revert "iwlwifi: debugFs to enable/disable 40MHz channel support" before applying this one. Alternatively, feel free to post a patch that merely changes the references from "fat" to "ht40" or whatever on top of the other patch.
John
Signature · 3 lines
John W. Linville Someday the world will need a hero, and you [email protected] might be all we have. Be ready. ¡Viva Honduras Libre!
PATCH v3 12/14 iwlwifi: debugFs to enable/disable HT40 support
From: Wey-Yi Guy <[email protected]>
Add debugfs file to enable/disable HT40(40MHz) channel support. By default, 40MHz is supported if AP can support the function.
By echo "1" to "disable_ht40" file, iwlwifi driver will disable the 40MHz support and only allow 20MHz channel.
Because the information exchange happen during association time, so enable/disable ht40 channel only can be performed when it is not associated with AP.
---
v2: name change "fat_mode" -> "ht40"
v3: formatting fixes
John,
This patch applies cleanly after reverting the original. Sorry for the problems.
Reinette
drivers/net/wireless/iwlwifi/iwl-core.c | 4 ++ drivers/net/wireless/iwlwifi/iwl-debug.h | 1 + drivers/net/wireless/iwlwifi/iwl-debugfs.c | 46 ++++++++++++++++++++++++++++ drivers/net/wireless/iwlwifi/iwl-dev.h | 1 + 4 files changed, 52 insertions(+), 0 deletions(-)
drivers/net/wireless/iwlwifi/iwl-core.c +4 -0
@@ -646,6 +646,10 @@ u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv,if (!sta_ht_inf->ht_supported)return 0 ; } +#ifdef CONFIG_IWLWIFI_DEBUG +if (priv->disable_ht40) +return 0 ; +#endif return iwl_is_channel_extension (priv, priv->band,le16_to_cpu (priv->staging_rxon.channel), iwl_ht_conf->extension_chan_offset);
drivers/net/wireless/iwlwifi/iwl-debug.h +1 -0
@@ -88,6 +88,7 @@ struct iwl_debugfs {#ifdef CONFIG_IWLWIFI_LEDS struct dentry *file_led;#endif +struct dentry *file_disable_ht40; } dbgfs_data_files;struct dir_rf_files {struct dentry *file_disable_sensitivity;
drivers/net/wireless/iwlwifi/iwl-debugfs.c +46 -0
70 lines not on this page · raw message
drivers/net/wireless/iwlwifi/iwl-dev.h +1 -0
@@ -1164,6 +1164,7 @@ struct iwl_priv {/* debugging info */ u32 framecnt_to_us;atomic_t restrict_refcnt; +bool disable_ht40;#ifdef CONFIG_IWLWIFI_DEBUGFS /* debugfs */ struct iwl_debugfs *dbgfs;
Signature · 1 line
1.5.6.3