ppc4xx: amcc: Set CONFIG_SYS_BOOTMAPSZ to 16MB to enable booting of big kernels
PATCH 1/1 ppc4xx: amcc: Set CONFIG_SYS_BOOTMAPSZ to 16MB to enable booting of big kernels
This patch changes CONFIG_SYS_BOOTMAPSZ from 8MB to 16MB which is the initial TLB on 40x PPC's in the Linux kernel. With this change even bigger Linux kernels (> 8MB) can be booted.
--- include/configs/amcc-common.h | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)
include/configs/amcc-common.h +3 -3
@@ -137,10 +137,10 @@/* * For booting Linux, the board info and command line data -* have to be in the first 8 MB of memory, since this is -* the maximum mapped by the Linux kernel during initialization. +* have to be in the first 16 MB of memory, since this is +* the maximum mapped by the 40x Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (16 << 20)/* Initial Memory map for Linux */ /* * Internal Definitions
Signature · 1 line
1.6.3.4
PATCH 1/1 ppc4xx: amcc: Set CONFIG_SYS_BOOTMAPSZ to 16MB to enable booting of big kernels
Hi Stefan,
Quoted 3 lines · Stefan Roese
This patch changes
CONFIG_SYS_BOOTMAPSZfrom 8MB to 16MB which is the initial TLB on 40x PPC's in the Linux kernel. With this change even bigger Linux kernels (> 8MB) can be booted.
Might be nice to increase CONFIG_SYS_BOOTM_LEN at the same time. Or maybe something along the lines of changing CONFIG_SYS_BOOTM_LEN to be based on CONFIG_SYS_BOOTMAPSZ in general as (at a glance) it looks like they should generally be the same value.
Best,
Peter
PATCH 1/1 ppc4xx: amcc: Set CONFIG_SYS_BOOTMAPSZ to 16MB to enable booting of big kernels
Hi Peter,
Quoted 8 lines · On Wednesday 29 July 2009 16:36:17 Peter Tyser wrote:
Quoted 3 lines
This patch changes
CONFIG_SYS_BOOTMAPSZfrom 8MB to 16MB which is the initial TLB on 40x PPC's in the Linux kernel. With this change even bigger Linux kernels (> 8MB) can be booted.Might be nice to increase
CONFIG_SYS_BOOTM_LENat the same time. Or maybe something along the lines of changingCONFIG_SYS_BOOTM_LENto be based onCONFIG_SYS_BOOTMAPSZin general as (at a glance) it looks like they should generally be the same value.
I never "tuned" CONFIG_SYS_BOOTM_LEN before. But you are right, this should be changed as well. I'll wait a short while for further comments on this and send an updated patch version then.
Thanks.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================