timers fixes for 2.6.31
Linus,
Please pull the latest timers-fixes-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git timers-fixes-for-linus
Thanks,
tglx
------------------>
Magnus Damm (1):
clocksource: save mult_orig in clocksource_disable()
include/linux/clocksource.h | 12 +++++++++++- 1 files changed, 11 insertions(+), 1 deletions(-)
include/linux/clocksource.h +11 -1
@@ -293,7 +293,11 @@ static inline int clocksource_enable(struct clocksource *cs)if (cs->enable) ret = cs->enable (cs); -/* save mult_orig on enable */ +/* The frequency may have changed while the clocksource +* was disabled. If so the code in ->enable() must update +* the mult value to reflect the new frequency. Make sure +* mult_orig follows this change. +*/ cs->mult_orig = cs->mult;return ret;
@@ -309,6 +313,12 @@ static inline int clocksource_enable(struct clocksource *cs)*/ static inline void clocksource_disable (struct clocksource *cs) { +/* Save mult_orig in mult so clocksource_enable() can +* restore the value regardless if ->enable() updates +* the value of mult or not. +*/ + cs->mult = cs->mult_orig; +if (cs->disable) cs->disable (cs); }
Quoted 7 lines · Thomas Gleixner
Please pull the latest timers-fixes-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.gittimers-fixes-for-linusThanks,
Quoted 8 lines
tglx
------------------>
Magnus Damm (1):
clocksource: savemult_originclocksource_disable()include/linux/clocksource.h | 12 +++++++++++- 1 files changed, 11 insertions(+), 1 deletions(-)
Hmm. You seem to have forgotten to push this out. I realize you're off to vacation, do you have time to check that?
Linus
Quoted 15 lines · Linus Torvalds
Quoted 13 lines · Thomas Gleixner
Please pull the latest timers-fixes-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.gittimers-fixes-for-linusThanks,
tglx
------------------>
Magnus Damm (1):
clocksource: savemult_originclocksource_disable()
Quoted 5 lines
Quoted 2 lines
include/linux/clocksource.h | 12 +++++++++++- 1 files changed, 11 insertions(+), 1 deletions(-)Hmm. You seem to have forgotten to push this out. I realize you're off to vacation, do you have time to check that?
I can't find this merge in Linus' tree as of this writing, so I'm assuming tglx vanished. Peter can you put that commit in the mentioned tip branch?
Alternatively, I can stick it in a git tree for Linus.
Quoted 16 lines · Linus Torvalds
Quoted 13 lines · Thomas Gleixner
Please pull the latest timers-fixes-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.gittimers-fixes-for-linusThanks,
tglx
------------------>
Magnus Damm (1):
clocksource: savemult_originclocksource_disable()
Quoted 5 lines
Quoted 2 lines
include/linux/clocksource.h | 12 +++++++++++- 1 files changed, 11 insertions(+), 1 deletions(-)Hmm. You seem to have forgotten to push this out. I realize you're off to vacation, do you have time to check that?
I've pushed out the fix. I did two minor (non-functional) edits to the commit: fixed the comment style to match that of the rest of clocksource.h and improved the commit log a tiny bit. Find the updated pull request below.
[ Markus, John: the fix looks right for .31 but i think there's two
small structural problems with this code, which might have contributed to the bug to happen to begin with:
Firstly, ->mult_orig is a slight misnomer - if it was named properly we wouldnt even need the comments to explain how to use and update it. It's the unadjusted multiplicator while _orig patterns in the kernel generally suggest some sort of save/restore pattern (which this is not).
I'd suggest to rename it to ->mult_unadjusted, ->mult_raw or ->mult_static instead. This field has not gotten into many clocksource drivers yet so it's easy to do. For .32 obviously.
Secondly, the broader design question is: why are clocksource drivers mucking around with NTP details? Whether NTP is running should be a transparent detail to drivers and if such details are visible in low level driver (which they are in arch/arm/plat-omap/common.c et al) that's sign of uncleanliness. Mind improving that? (for .32 too)
Also, a commit message quality nit: the commit description lacks details about precisely what bug was hit in practice. While this fix is eligible even without that info, it's not good to omit it.
]
Linus, please pull the latest timers-fixes-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git timers-fixes-for-linus
Thanks,
Ingo
------------------>
Magnus Damm (1):
clocksource: Save mult_orig in clocksource_disable()
include/linux/clocksource.h | 14 +++++++++++++- 1 files changed, 13 insertions(+), 1 deletions(-)
include/linux/clocksource.h +13 -1
@@ -293,7 +293,12 @@ static inline int clocksource_enable(struct clocksource *cs)if (cs->enable) ret = cs->enable (cs); -/* save mult_orig on enable */ +/* +* The frequency may have changed while the clocksource +* was disabled. If so the code in ->enable() must update +* the mult value to reflect the new frequency. Make sure +* mult_orig follows this change. +*/ cs->mult_orig = cs->mult;return ret;
@@ -309,6 +314,13 @@ static inline int clocksource_enable(struct clocksource *cs)*/ static inline void clocksource_disable (struct clocksource *cs) { +/* +* Save mult_orig in mult so clocksource_enable() can +* restore the value regardless if ->enable() updates +* the value of mult or not. +*/ + cs->mult = cs->mult_orig; +if (cs->disable) cs->disable (cs); }
Quoted 6 lines · Ingo Molnar
I've pushed out the fix. I did two minor (non-functional) edits to the commit: fixed the comment style to match that of the rest of
clocksource.hand improved the commit log a tiny bit. Find the updated pull request below.
OK, won't worry about it, then.
-hpa
Signature · 2 lines
H. Peter Anvin, Intel Open Source Technology Center I work for Intel. I don't speak on their behalf.
Quoted 14 lines · Ingo Molnar
[ Markus, John: the fix looks right for .31 but i think there's two small structural problems with this code, which might have contributed to the bug to happen to begin with:
Firstly, ->mult_orig is a slight misnomer - if it was named properly we wouldnt even need the comments to explain how to use and update it. It's the unadjusted multiplicator while
_origpatterns in the kernel generally suggest some sort of save/restore pattern (which this is not).I'd suggest to rename it to ->mult_unadjusted, ->mult_raw or ->mult_static instead. This field has not gotten into many clocksource drivers yet so it's easy to do. For .32 obviously.
Quoted 6 lines
Secondly, the broader design question is: why are clocksource drivers mucking around with NTP details? Whether NTP is running should be a transparent detail to drivers and if such details are visible in low level driver (which they are in
arch/arm/plat-omap/common.cet al) that's sign of uncleanliness. Mind improving that? (for .32 too)
Well, the clocksources aren't really mucking with NTP details, but NTP mucks with the clocksource. And so this was a way to try to preserve the original mult value, and I'll admit was a bit stapled on. This mostly comes from how the clocksource structure has swelled over time to include quite a bit of timekeeping specific information.
Splitting this up has been on my list for awhile, but I've never gotten to it. However, Martin Schwidefsky has been doing a great job with his latest patches cleaning up some of uglier parts of the timekeeping/clocksource interactions. There is still lots of changes I'd like to see, but they will take time as we still haven't gotten all the arches over to GENERIC_TIME, so some cruft has to stick
around. But Martin's patches are a great big step towards it and
hopefully his patches will be ready for .32.
thanks
-john
Quoted 28 lines · On Thu, 6 Aug 2009 15:36:36 -0700 john stultz <[email protected]> wrote:
Quoted 14 lines · Ingo Molnar
[ Markus, John: the fix looks right for .31 but i think there's two small structural problems with this code, which might have contributed to the bug to happen to begin with:
Firstly, ->mult_orig is a slight misnomer - if it was named properly we wouldnt even need the comments to explain how to use and update it. It's the unadjusted multiplicator while
_origpatterns in the kernel generally suggest some sort of save/restore pattern (which this is not).I'd suggest to rename it to ->mult_unadjusted, ->mult_raw or ->mult_static instead. This field has not gotten into many clocksource drivers yet so it's easy to do. For .32 obviously.
Quoted 6 lines
Secondly, the broader design question is: why are clocksource drivers mucking around with NTP details? Whether NTP is running should be a transparent detail to drivers and if such details are visible in low level driver (which they are in
arch/arm/plat-omap/common.cet al) that's sign of uncleanliness. Mind improving that? (for .32 too)Well, the clocksources aren't really mucking with NTP details, but NTP mucks with the clocksource. And so this was a way to try to preserve the original mult value, and I'll admit was a bit stapled on. This mostly comes from how the clocksource structure has swelled over time to include quite a bit of timekeeping specific information.
Quoted 8 lines
Splitting this up has been on my list for awhile, but I've never gotten to it. However, Martin Schwidefsky has been doing a great job with his latest patches cleaning up some of uglier parts of the timekeeping/clocksource interactions. There is still lots of changes I'd like to see, but they will take time as we still haven't gotten all the arches over to
GENERIC_TIME, so some cruft has to stick
around. But Martin's patches are a great big step towards it and
hopefully his patches will be ready for .32.
The question what we do with the mult_orig on clocksource enable/disable is one of the remaining open issues with my patch set. With the NTP adjusted multiplicator in the struct timekeeper we don't have a convenient place to keep the NTP adjusted multiplier while a clocksource is disabled. My initial thought was: why do we store the old multiplier at all? Its not that the clocksource changes all the time and NTP will catch up again if it is changed. Just start from scratch with the initial multiplicator.
Signature · 4 lines
blue skies, Martin. "Reality continues to ruin my life." - Calvin.
Quoted 12 lines · Martin Schwidefsky
Quoted 8 lines · On Thu, 6 Aug 2009 15:36:36 -0700 john stultz <[email protected]> wrote:
Splitting this up has been on my list for awhile, but I've never gotten to it. However, Martin Schwidefsky has been doing a great job with his latest patches cleaning up some of uglier parts of the timekeeping/clocksource interactions. There is still lots of changes I'd like to see, but they will take time as we still haven't gotten all the arches over to
GENERIC_TIME, so some cruft has to stick
around. But Martin's patches are a great big step towards it and
hopefully his patches will be ready for .32.
Quoted 8 lines
The question what we do with the
mult_origon clocksource enable/disable is one of the remaining open issues with my patch set. With the NTP adjusted multiplicator in the struct timekeeper we don't have a convenient place to keep the NTP adjusted multiplier while a clocksource is disabled. My initial thought was: why do we store the old multiplier at all? Its not that the clocksource changes all the time and NTP will catch up again if it is changed. Just start from scratch with the initial multiplicator.
Indeed, we don't need to store the adjusted multiplier while a clocksource is not in use. We just have to make sure every time it is used, we start with the same original multiplier, so we have a constant base from which the NTP freq adjustment can be made upon.
I think you're approach (keeping the clocksource mult untouched, and keeping the adjusted mult in the timekeeper structure)is fine.
thanks
-john