Add support for the ESTeem 195E (PPC405EP) SBC
Subsystems (2)
PATCH v2 1/1 Add support for the ESTeem 195E (PPC405EP) SBC
This patch adds support for the ESTeem 195E Hotfoot SBC. I've been maintaining this out-of-tree for some time now for older kernels, but recently I ported it to the new unified powerpc tree with the intent of pushing it upstream.
The 195E boards use ancient versions of u-boot and a slightly mangled verison of the oft-abused ppcboot header. (v2 of this patch moves the modified ppcboot header into ppcboot-hotfoot.h)
There are several variants of the SBC deployed, single/dual ethernet+serial, and also 4MB/8MB flash variations. In the interest of having a single kernel image boot on all boards, the cuboot shim detects the differences and mangles the DTS tree appropriately.
With the exception of the CF interface that was never populated on production boards, this code/DTS supports all boardpop options.
--- arch/powerpc/boot/Makefile | 4 +- arch/powerpc/boot/cuboot-hotfoot.c | 142 +++++++++++++ arch/powerpc/boot/dts/hotfoot.dts | 297 ++++++++++++++++++++++++++++ arch/powerpc/boot/ppcboot-hotfoot.h | 133 +++++++++++++ arch/powerpc/platforms/40x/Kconfig | 10 + arch/powerpc/platforms/40x/ppc40x_simple.c | 3 +- 6 files changed, 587 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/boot/cuboot-hotfoot.c create mode 100644 arch/powerpc/boot/dts/hotfoot.dts create mode 100644 arch/powerpc/boot/ppcboot-hotfoot.h
arch/powerpc/boot/Makefile +3 -1
@@ -39,6 +39,7 @@ DTS_FLAGS ?= -p 1024 $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405 +$(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
@@ -67,7 +68,7 @@ src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \ cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \ fsl-soc.c mpc8xx.c pq2.c src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \ - cuboot-ebony.c treeboot-ebony.c prpmc2800.c \ + cuboot-ebony.c cuboot-hotfoot.c treeboot-ebony.c prpmc2800.c \ ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \ cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \ cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
@@ -190,6 +191,7 @@ image-$(CONFIG_DEFAULT_UIMAGE) += uImage # Board ports in arch/powerpc/platform/40x/Kconfig image-$(CONFIG_EP405) += dtbImage.ep405 +image-$(CONFIG_HOTFOOT) += cuImage.hotfoot image-$(CONFIG_WALNUT) += treeImage.walnut image-$(CONFIG_ACADIA) += cuImage.acadia
arch/powerpc/boot/cuboot-hotfoot.c new file +142 -0
142 lines not on this page · raw message
arch/powerpc/boot/dts/hotfoot.dts new file +297 -0
297 lines not on this page · raw message
arch/powerpc/boot/ppcboot-hotfoot.h new file +133 -0
133 lines not on this page · raw message
arch/powerpc/platforms/40x/Kconfig +10 -0
@@ -40,6 +40,16 @@ config HCU4 help This option enables support for the Nestal Maschinen HCU4 board. +config HOTFOOT + bool "Hotfoot" + depends on 40x + default n + select 405EP + select PPC40x_SIMPLE + select PCI + help + This option enables support for the ESTEEM 195E Hotfoot board. + config KILAUEA bool "Kilauea" depends on 40x
arch/powerpc/platforms/40x/ppc40x_simple.c +2 -1
@@ -54,7 +54,8 @@ static char *board[] __initdata = {"amcc,acadia" ,"amcc,haleakala" ,"amcc,kilauea" , - "amcc,makalu" +"amcc,makalu" , + "est,hotfoot" };static int __init ppc40x_probe (void )
Signature · 1 line
1.6.2.5