v1 powerpc/405ex: Support cuImage for PPC405EX
Summary: powerpc/405ex: Support cuImage for PPC405EX
Reviewers: Josh and linux-ppc
----------------------------------------------------
V1 patches are generated based on V0 as Josh's comments:
===
1. Remove duplicate #defines to merge 405EX with 440GX.
2. To prefix with ibm405ex_ for the related function.
3. Remove redundant comment for sysclk.
These patch series are used to support cuImage on the kilauea board based on PPC405ex.
Tested on the amcc kilauea board:
===
...
=> tftp 1000000 cuImage.kilauea
Waiting for PHY auto negotiation to complete.. done
ENET Speed is 100 Mbps - FULL duplex connection (EMAC0)
Using ppc_4xx_eth0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.103 Filename 'cuImage.kilauea'.
Load address: 0x1000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#########################################done
Bytes transferred = 1541019 (17839b hex)
=> bootm
## Booting kernel from Legacy Image at 01000000 ...
Image Name: Linux-2.6.31-rc5-57857-g2969260- Created: 2009-08-23 1:46:31 UTC Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1540955 Bytes = 1.5 MB
Load Address: 00400000
Entry Point: 00400468
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
CPU clock-frequency <- 0x23c345fa (600MHz)
CPU timebase-frequency <- 0x23c345fa (600MHz) /plb: clock-frequency <- bebc1fe (200MHz) /plb/opb: clock-frequency <- 5f5e0ff (100MHz) /plb/opb/ebc: clock-frequency <- 5f5e0ff (100MHz) /plb/opb/serial@ef600200: clock-frequency <- a8c000 (11MHz) /plb/opb/serial@ef600300: clock-frequency <- a8c000 (11MHz) Memory <- <0x0 0x10000000> (256MB)
ethernet0: local-mac-address <- 00:06:4b:10:22:6c
ethernet1: local-mac-address <- 00:06:4b:10:22:6d
zImage starting: loaded at 0x00400000 (sp: 0x0fe9ec08) Allocating 0x330c70 bytes for kernel ...
gunzipping (0x00000000 <- 0x0040f000:0x0073a03c)...done 0x31425c bytes
Linux/PowerPC load: [...]
Finalizing device tree... flat tree at 0x747300 Using PowerPC 40x Platform machine description Linux version 2.6.31-rc5-57857-g2969260-dirty ...
Best Regards
Tiejun
PATCH v2 2/2 powerpc/405ex: support cuImage via included dtb
To support cuImage, we need to initialize the required sections and ensure that it is built.
--- arch/powerpc/boot/Makefile | 2 +- arch/powerpc/boot/cuboot-kilauea.c | 49 ++++++++++++++++++++++++++++++++++++ 2 files changed, 50 insertions(+), 1 deletions(-) create mode 100644 arch/powerpc/boot/cuboot-kilauea.c
arch/powerpc/boot/Makefile +1 -1
@@ -75,7 +75,7 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \ cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ - cuboot-acadia.c cuboot-amigaone.c + cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot))
arch/powerpc/boot/cuboot-kilauea.c new file +49 -0
49 lines not on this page · raw message
Signature · 1 line
1.5.6
Re: [v2 PATCH 2/2] powerpc/405ex: support cuImage via included dtb
This subject should be [v1 PATCH 2/2] ...
Best Regards
Tiejun
Quoted 78 lines · Tiejun Chen
To support cuImage, we need to initialize the required sections and ensure that it is built.
Signed-off-by Tiejun Chen <[email protected]>--- arch/powerpc/boot/Makefile | 2 +- arch/powerpc/boot/cuboot-kilauea.c | 49 ++++++++++++++++++++++++++++++++++++ 2 files changed, 50 insertions(+), 1 deletions(-) create mode 100644 arch/powerpc/boot/cuboot-kilauea.carch/powerpc/boot/Makefile +1
-1@@ -75,7 +75,7 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \ cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ - cuboot-acadia.c cuboot-amigaone.c + cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot))arch/powerpc/boot/cuboot-kilauea.c new file +49
-0@@ -0,0 +1,49 @@ +/* +* Old U-boot compatibility for PPC405EX. This image is already included +* a dtb. +* +* Author: Tiejun Chen <[email protected]> +* +* Copyright (C) 2009 Wind River Systems, Inc. +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License version 2 as published +* by the Free Software Foundation. +*/ + +#include "ops.h" +#include "io.h" +#include "dcr.h" +#include "stdio.h" +#include "4xx.h" +#include "44x.h" +#include "cuboot.h" + +#define TARGET_4xx +#define TARGET_44x +#include "ppcboot.h" + +#define KILAUEA_SYS_EXT_SERIAL_CLOCK 11059200/* ext. 11.059MHz clk */ + +static bd_t bd; + +static void kilauea_fixups (void ) +{ +unsigned long sysclk =33333333 ; + +ibm405ex_fixup_clocks (sysclk,KILAUEA_SYS_EXT_SERIAL_CLOCK ); +dt_fixup_memory (bd.bi_memstart, bd.bi_memsize); +ibm4xx_fixup_ebc_ranges ("/plb/opb/ebc" ); +dt_fixup_mac_address_by_alias ("ethernet0" , bd.bi_enetaddr); +dt_fixup_mac_address_by_alias ("ethernet1" , bd.bi_enet1addr); +} + +void platform_init (unsigned long r3,unsigned long r4,unsigned long r5, +unsigned long r6,unsigned long r7) +{ +CUBOOT_INIT (); + platform_ops.fixups = kilauea_fixups; + platform_ops.exit = ibm40x_dbcr_reset; +fdt_init (_dtb_start); +serial_console_init (); +}
PATCH 1/2 powerpc/405ex: provide necessary fixup function to support cuImage
In reply to Tiejun ChenFor cuImage format it's necessary to provide clock fixups since u-boot will not pass necessary clock frequency into the dtb included into cuImage so we implement the clock fixups as defined in the technical documentation for the board and update header file with the basic register definitions.
--- arch/powerpc/boot/4xx.c | 142 +++++++++++++++++++++++++++++++++++++++++++++++ arch/powerpc/boot/4xx.h | 1 + arch/powerpc/boot/dcr.h | 4 +- 3 files changed, 144 insertions(+), 3 deletions(-)
arch/powerpc/boot/4xx.c +142 -0
@@ -8,6 +8,10 @@* Eugene Surovegin <[email protected]> or <[email protected]> * Copyright (c) 2003, 2004 Zultys Technologies * +* Copyright (C) 2009 Wind River Systems, Inc. +* Updated for supporting PPC405EX on Kilauea. +* Tiejun Chen <[email protected]> +* * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version
@@ -659,3 +663,141 @@ void ibm405ep_fixup_clocks(unsigned int sys_clk)dt_fixup_clock ("/plb/opb/serial@ef600300" , uart0);dt_fixup_clock ("/plb/opb/serial@ef600400" , uart1); } + +static u8 ibm405ex_fwdv_multi_bits[] = { +/* values for: 1 - 16 */ +0x01 ,0x02 ,0x0e ,0x09 ,0x04 ,0x0b ,0x10 ,0x0d ,0x0c ,0x05 , +0x06 ,0x0f ,0x0a ,0x07 ,0x08 ,0x03 +}; + +u32 ibm405ex_get_fwdva (unsigned long cpr_fwdv) +{ +u32 index; + +for (index =0 ; index <ARRAY_SIZE (ibm405ex_fwdv_multi_bits); index++) +if (cpr_fwdv == (u32 )ibm405ex_fwdv_multi_bits[index]) +return index +1 ; + +return 0 ; +} + +static u8 ibm405ex_fbdv_multi_bits[] = { +/* values for: 1 - 100 */ +0x00 ,0xff ,0x7e ,0xfd ,0x7a ,0xf5 ,0x6a ,0xd5 ,0x2a ,0xd4 , +0x29 ,0xd3 ,0x26 ,0xcc ,0x19 ,0xb3 ,0x67 ,0xce ,0x1d ,0xbb , +0x77 ,0xee ,0x5d ,0xba ,0x74 ,0xe9 ,0x52 ,0xa5 ,0x4b ,0x96 , +0x2c ,0xd8 ,0x31 ,0xe3 ,0x46 ,0x8d ,0x1b ,0xb7 ,0x6f ,0xde , +0x3d ,0xfb ,0x76 ,0xed ,0x5a ,0xb5 ,0x6b ,0xd6 ,0x2d ,0xdb , +0x36 ,0xec ,0x59 ,0xb2 ,0x64 ,0xc9 ,0x12 ,0xa4 ,0x48 ,0x91 , +0x23 ,0xc7 ,0x0e ,0x9c ,0x38 ,0xf0 ,0x61 ,0xc2 ,0x05 ,0x8b , +0x17 ,0xaf ,0x5f ,0xbe ,0x7c ,0xf9 ,0x72 ,0xe5 ,0x4a ,0x95 , +0x2b ,0xd7 ,0x2e ,0xdc ,0x39 ,0xf3 ,0x66 ,0xcd ,0x1a ,0xb4 , +0x68 ,0xd1 ,0x22 ,0xc4 ,0x09 ,0x93 ,0x27 ,0xcf ,0x1e ,0xbc , +/* values for: 101 - 200 */ +0x78 ,0xf1 ,0x62 ,0xc5 ,0x0a ,0x94 ,0x28 ,0xd0 ,0x21 ,0xc3 , +0x06 ,0x8c ,0x18 ,0xb0 ,0x60 ,0xc1 ,0x02 ,0x84 ,0x08 ,0x90 , +0x20 ,0xc0 ,0x01 ,0x83 ,0x07 ,0x8f ,0x1f ,0xbf ,0x7f ,0xfe , +0x7d ,0xfa ,0x75 ,0xea ,0x55 ,0xaa ,0x54 ,0xa9 ,0x53 ,0xa6 , +0x4c ,0x99 ,0x33 ,0xe7 ,0x4e ,0x9d ,0x3b ,0xf7 ,0x6e ,0xdd , +0x3a ,0xf4 ,0x69 ,0xd2 ,0x25 ,0xcb ,0x16 ,0xac ,0x58 ,0xb1 , +0x63 ,0xc6 ,0x0d ,0x9b ,0x37 ,0xef ,0x5e ,0xbd ,0x7b ,0xf6 , +0x6d ,0xda ,0x35 ,0xeb ,0x56 ,0xad ,0x5b ,0xb6 ,0x6c ,0xd9 , +0x32 ,0xe4 ,0x49 ,0x92 ,0x24 ,0xc8 ,0x11 ,0xa3 ,0x47 ,0x8e , +0x1c ,0xb8 ,0x70 ,0xe1 ,0x42 ,0x85 ,0x0b ,0x97 ,0x2f ,0xdf , +/* values for: 201 - 255 */ +0x3e ,0xfc ,0x79 ,0xf2 ,0x65 ,0xca ,0x15 ,0xab ,0x57 ,0xae , +0x5c ,0xb9 ,0x73 ,0xe6 ,0x4d ,0x9a ,0x34 ,0xe8 ,0x51 ,0xa2 , +0x44 ,0x89 ,0x13 ,0xa7 ,0x4f ,0x9e ,0x3c ,0xf8 ,0x71 ,0xe2 , +0x45 ,0x8a ,0x14 ,0xa8 ,0x50 ,0xa1 ,0x43 ,0x86 ,0x0c ,0x98 , +0x30 ,0xe0 ,0x41 ,0x82 ,0x04 ,0x88 ,0x10 ,0xa0 ,0x40 ,0x81 , +0x03 ,0x87 ,0x0f ,0x9f ,0x3f /* END */ +}; + +u32 ibm405ex_get_fbdv (unsigned long cpr_fbdv) +{ +u32 index; + +for (index =0 ; index <ARRAY_SIZE (ibm405ex_fbdv_multi_bits); index++) +if (cpr_fbdv == (u32 )ibm405ex_fbdv_multi_bits[index]) +return index +1 ; + +return 0 ; +} + +void ibm405ex_fixup_clocks (unsigned int sys_clk,unsigned int uart_clk) +{ +/* PLL config */ +u32 pllc =CPR0_READ (DCRN_CPR0_PLLC ); +u32 plld =CPR0_READ (DCRN_CPR0_PLLD ); +u32 cpud =CPR0_READ (DCRN_CPR0_PRIMAD ); +u32 plbd =CPR0_READ (DCRN_CPR0_PRIMBD ); +u32 opbd =CPR0_READ (DCRN_CPR0_OPBD ); +u32 perd =CPR0_READ (DCRN_CPR0_PERD ); + +/* Dividers */ +u32 fbdv =ibm405ex_get_fbdv (__fix_zero ((plld >>24 ) &0xff ,1 )); + +u32 fwdva =ibm405ex_get_fwdva (__fix_zero ((plld >>16 ) &0x0f ,1 )); + +u32 cpudv0 =__fix_zero ((cpud >>24 ) &7 ,8 ); + +/* PLBDV0 is hardwared to 010. */ +u32 plbdv0 =2 ; +u32 plb2xdv0 =__fix_zero ((plbd >>16 ) &7 ,8 ); + +u32 opbdv0 =__fix_zero ((opbd >>24 ) &3 ,4 ); + +u32 perdv0 =__fix_zero ((perd >>24 ) &3 ,4 ); + +/* Resulting clocks */ +u32 cpu, plb, opb, ebc, vco, tb, uart0, uart1; + +/* PLL's VCO is the source for primary forward ? */ +if (pllc &0x40000000 ) { +u32 m; + +/* Feedback path */ +switch ((pllc >>24 ) &7 ) { +case 0 : +/* PLLOUTx */ + m = fbdv; +break ; +case 1 : +/* CPU */ + m = fbdv * fwdva * cpudv0; +break ; +case 5 : +/* PERClk */ + m = fbdv * fwdva * plb2xdv0 * plbdv0 * opbdv0 * perdv0; +break ; +default : +printf ("WARNING ! Invalid PLL feedback source !\n" ); + goto bypass; + } + + vco = (unsigned int )(sys_clk * m); + }else { +bypass: +/* Bypass system PLL */ + vco =0 ; + } + +/* CPU = VCO / ( FWDVA x CPUDV0) */ + cpu = vco / (fwdva * cpudv0); +/* PLB = VCO / ( FWDVA x PLB2XDV0 x PLBDV0) */ + plb = vco / (fwdva * plb2xdv0 * plbdv0); +/* OPB = PLB / OPBDV0 */ + opb = plb / opbdv0; +/* EBC = OPB / PERDV0 */ + ebc = opb / perdv0; + + tb = cpu; + uart0 = uart1 = uart_clk; + +dt_fixup_cpu_clocks (cpu, tb,0 ); +dt_fixup_clock ("/plb" , plb); +dt_fixup_clock ("/plb/opb" , opb); +dt_fixup_clock ("/plb/opb/ebc" , ebc); +dt_fixup_clock ("/plb/opb/serial@ef600200" , uart0); +dt_fixup_clock ("/plb/opb/serial@ef600300" , uart1); +}
arch/powerpc/boot/4xx.h +1 -0
@@ -21,6 +21,7 @@ void ibm4xx_fixup_ebc_ranges(const char *ebc);void ibm405gp_fixup_clocks (unsigned int sys_clk,unsigned int ser_clk);void ibm405ep_fixup_clocks (unsigned int sys_clk); +void ibm405ex_fixup_clocks (unsigned int sys_clk,unsigned int uart_clk);void ibm440gp_fixup_clocks (unsigned int sys_clk,unsigned int ser_clk);void ibm440ep_fixup_clocks (unsigned int sys_clk,unsigned int ser_clk,unsigned int tmr_clk);
arch/powerpc/boot/dcr.h +1 -3
@@ -153,9 +153,7 @@ static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR,#define DCRN_CPC0_PLLMR1 0xf4#define DCRN_CPC0_UCR 0xf5 -/* 440GX Clock control etc */ - - +/* 440GX/405EX Clock Control reg */ #define DCRN_CPR0_CLKUPD 0x020#define DCRN_CPR0_PLLC 0x040#define DCRN_CPR0_PLLD 0x060
Signature · 1 line
1.5.6