Skip to contentSkip to conversation

Question on simple RFCOMM server

DISCUSSION Mateus Interciso 3 participants 5 messages Aug 25, 2009 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

Hello, I have a very simple RFCOMM server that I adapted from an extremely simple TCP echo server I've made for learning TCP, it's a simple fork() server, and while the TCP server works perfeclty, the RFCOMM works only with 2 connected clients at the same time, and I'm failling to see the problem, can someone help me?

Here's the code:

(The commented part if the TCP part)

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <errno.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <sys/wait.h>
#include <bluetooth/bluetooth.h>
#include <bluetooth/rfcomm.h>

#define MYPORT 10
#define BACKLOG 31
#define MAX_SIZE 80

int main(int argc, char *argv[])
{
int listenfd, connfd;
pid_t childpid;
socklen_t clilen;
struct sockaddr_rc cliaddr, servaddr;
char buf[MAX_SIZE];
int i =0;

  //listenfd = socket(AF_INET, SOCK_STREAM, 0);
  listenfd = socket(AF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM);
  if(listenfd < 0)
  {
    perror("socket");
    exit(errno);
  }

  bzero(&servaddr, sizeof(servaddr));
  servaddr.rc_family = AF_BLUETOOTH;
  servaddr.rc_bdaddr = *BDADDR_ANY;
  servaddr.rc_channel = (uint8_t)MYPORT;
  /*
  servaddr.sin_family = AF_INET;
  servaddr.sin_addr.s_addr = htonl(INADDR_ANY);
  servaddr.sin_port = htons(MYPORT);
  */
  if(bind(listenfd,(struct sockaddr*)&servaddr, sizeof(servaddr)) < 0)
  {
    perror("bind");
    exit(errno);
  }

  if(listen(listenfd,BACKLOG) < 0)
  {
    perror("listen");
    exit(errno);
  }

while(1)
{
clilen = sizeof(cliaddr);
if((connfd = accept(listenfd, (struct sockaddr*)&cliaddr, &clilen))
< 0)

    {
      perror("accept");
      exit(errno);
    }
    if((childpid = fork()) == 0)
    {
      i = 0;
      close(listenfd);
      fprintf(stderr,"[DEBUG] Got connection\n");
      memset(buf,'\0',sizeof(buf));
      //echo server
      if(read(connfd, buf, MAX_SIZE) < 0) perror("read");
      else
        if(send(connfd, buf, strlen(buf), 0) < 0) perror("send");
      exit(0);
    }
    close(connfd);

}
return 0;
}

Thanks.

#1 lore raw

Hi Mateus,

I don't think the problem is with your code but has something to do with the Bluetooth Master / Slave mode. By default for the RFCOMM connection opened by the remote device your server is a Bluetooth Slave. And as a slave you can not handle more than 2 connections at once. To allow more connections you need your server to do a role switch after connection setup. Than it will act as a master and can handle up to seven connections.

Ciao,

Peter

Quoted 92 lines · Mateus Interciso

Hello, I have a very simple RFCOMM server that I adapted from an extremely simple TCP echo server I've made for learning TCP, it's a simple fork() server, and while the TCP server works perfeclty, the RFCOMM works only with 2 connected clients at the same time, and I'm failling to see the problem, can someone help me?

Here's the code:

(The commented part if the TCP part)

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <errno.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <sys/wait.h>
#include <bluetooth/bluetooth.h>
#include <bluetooth/rfcomm.h>

#define MYPORT 10
#define BACKLOG 31
#define MAX_SIZE 80

int main(int argc, char *argv[])
{
int listenfd, connfd;
pid_t childpid;
socklen_t clilen;
struct sockaddr_rc cliaddr, servaddr;
char buf[MAX_SIZE];
int i =0;

  //listenfd = socket(AF_INET, SOCK_STREAM, 0);
  listenfd = socket(AF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM);
  if(listenfd < 0)
  {
    perror("socket");
    exit(errno);
  }

  bzero(&servaddr, sizeof(servaddr));
  servaddr.rc_family = AF_BLUETOOTH;
  servaddr.rc_bdaddr = *BDADDR_ANY;
  servaddr.rc_channel = (uint8_t)MYPORT;
  /*
  servaddr.sin_family = AF_INET;
  servaddr.sin_addr.s_addr = htonl(INADDR_ANY);
  servaddr.sin_port = htons(MYPORT);
  */
  if(bind(listenfd,(struct sockaddr*)&servaddr, sizeof(servaddr)) < 0)
  {
    perror("bind");
    exit(errno);
  }

  if(listen(listenfd,BACKLOG) < 0)
  {
    perror("listen");
    exit(errno);
  }

while(1)
{
clilen = sizeof(cliaddr);
if((connfd = accept(listenfd, (struct sockaddr*)&cliaddr, &clilen))
< 0)

    {
      perror("accept");
      exit(errno);
    }
    if((childpid = fork()) == 0)
    {
      i = 0;
      close(listenfd);
      fprintf(stderr,"[DEBUG] Got connection\n");
      memset(buf,'\0',sizeof(buf));
      //echo server
      if(read(connfd, buf, MAX_SIZE) < 0) perror("read");
      else
        if(send(connfd, buf, strlen(buf), 0) < 0) perror("send");
      exit(0);
    }
    close(connfd);

}
return 0;
}

Quoted 6 lines

Thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

|       Peter Wippich                   Voice: +49 30 46776411          |
|       G&W Instruments GmbH            fax:   +49 30 46776419          |
|       Gustav-Meyer-Allee 25, Geb. 12  Email: [email protected]   |
|       D-13355 Berlin  / Germany                                       |
#2 lore raw
In reply to Mateus Interciso
Quoted 5 lines · Mateus Interciso

Hello, I have a very simple RFCOMM server that I adapted from an extremely simple TCP echo server I've made for learning TCP, it's a simple fork() server, and while the TCP server works perfeclty, the RFCOMM works only with 2 connected clients at the same time, and I'm failling to see the problem, can someone help me?

You didn't post what the 'failure' was but for RFCOMM you can only have one connection on a server channel (each RFCOMM channel corresponds to an emulated serial port).

since a TCP connection is defined by the address and port at each end, the Bluetooth equivalent is more likely to be a a L2CAP connection to a given PSM which can support up to ~64k channels (though as the Peter Wippich notes, the number of devices the radio can maintain connections with is limited)

iain

#3 lore raw

Thank you, however the Peter solution (setting via ioctl) worked perfectly, and it fit's with what I need, since all the clients are already implemented via RFCOMM, I'll leave it like this for now, the only issue is having to run it as root for setting the link mode, but I can bypass this by using hciconfig before running the main server. Or is there any configuration that can make a normal user change the default link mode?

Thanks all once again.

Quoted 22 lines · Iain Hibbert
Quoted 5 lines · Mateus Interciso

Hello, I have a very simple RFCOMM server that I adapted from an extremely simple TCP echo server I've made for learning TCP, it's a simple fork() server, and while the TCP server works perfeclty, the RFCOMM works only with 2 connected clients at the same time, and I'm failling to see the problem, can someone help me?

You didn't post what the 'failure' was but for RFCOMM you can only have one connection on a server channel (each RFCOMM channel corresponds to an emulated serial port).

since a TCP connection is defined by the address and port at each end, the Bluetooth equivalent is more likely to be a a L2CAP connection to a given PSM which can support up to ~64k channels (though as the Peter Wippich notes, the number of devices the radio can maintain connections with is limited)

iain

#4 lore raw
Quoted 2 lines · Mateus Interciso

Or is there any configuration that can make a normal user change the default link mode?

yes - do

	int opt = RFCOMM_LM_MASTER;
	setsockopt(listend, SOL_RFCOMM, RFCOMM_LM, &opt, sizeof(opt));

before listen()

iain