Skip to contentSkip to conversation

mbind01: Fix the bug of result output

PATCH In review Zhang Xiliang 2 participants 2 messages Sep 2, 2009 – Sep 7, 2009

lore
Share & tools
lore
#0 lore raw

PATCH 1/3 mbind01: Fix the bug of result output

I tested ltp mbind case and found the result is error as follows:

mbind01     0  TINFO  :  (case00) START
EXPECT: return value(ret)=0 errno=0 (Success)
RESULT: return value(ret)=0 errno=0 (Success)
mbind01     0  TINFO  :  (case00) END => OK
mbind01     0  TINFO  :  (case01) START
EXPECT: return value(ret)=-1 errno=22 (Invalid argument)
RESULT: return value(ret)=-1 errno=22 (Invalid argument)
mbind01     0  TINFO  :  (case01) END => NG
mbind01     0  TINFO  :  (case02) START
EXPECT: return value(ret)=-1 errno=22 (Invalid argument)
RESULT: return value(ret)=-1 errno=22 (Invalid argument)
mbind01     0  TINFO  :  (case02) END => NG
mbind01     0  TINFO  :  (case03) START
EXPECT: return value(ret)=0 errno=0 (Success)
RESULT: return value(ret)=0 errno=0 (Success)
mbind01     0  TINFO  :  (case03) END => OK
mbind01     0  TINFO  :  (case04) START
EXPECT: return value(ret)=-1 errno=22 (Invalid argument)
RESULT: return value(ret)=-1 errno=22 (Invalid argument)
mbind01     0  TINFO  :  (case04) END => NG
mbind01     0  TINFO  :  (case05) START
EXPECT: return value(ret)=0 errno=0 (Success)
RESULT: return value(ret)=0 errno=0 (Success)
mbind01     0  TINFO  :  (case05) END => OK
mbind01     0  TINFO  :  (case06) START
EXPECT: return value(ret)=0 errno=0 (Success), r/w check=OK
RESULT: return value(ret)=0 errno=0 (Success), r/w check=NG
mbind01     0  TINFO  :  (case06) END => OK
mbind01     0  TINFO  :  (case07) START
EXPECT: return value(ret)=0 errno=0 (Success)
RESULT: return value(ret)=0 errno=0 (Success)
mbind01     0  TINFO  :  (case07) END => OK
mbind01     0  TINFO  :  (case08) START
EXPECT: return value(ret)=-1 errno=22 (Invalid argument)
RESULT: return value(ret)=-1 errno=22 (Invalid argument)
mbind01     0  TINFO  :  (case08) END => NG
mbind01     0  TINFO  :  (case09) START
EXPECT: return value(ret)=-1 errno=22 (Invalid argument)
RESULT: return value(ret)=-1 errno=22 (Invalid argument)
mbind01     0  TINFO  :  (case09) END => NG
mbind01     0  TINFO  :  (case10) START
mbind01     1  TFAIL  :  get_mempolicy failed - errno = 14 : Bad address

In case01,case02,case04,case08,case09, the expect is same with the result. So these cases should be OK instead of NG.

In sourse code, TEST_RETURN should get value by "ret". By the way, the "switch/case RESULT_OK" missed "break".

---
 testcases/kernel/syscalls/mbind/mbind01.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
testcases/kernel/syscalls/mbind/mbind01.c +2 -0
index 2b861ac..94c2dd0 100644
@@ -389,6 +389,7 @@ int main(int ac, char **av) {
         		        int ret;
 	        	        tst_resm(TINFO,"(case%02d) START", i);
         	        	ret = do_test(&tcase[i]);
+				TEST_RETURN = ret;
 	        	        tst_resm(TINFO,"(case%02d) END => %s", i, ( TEST_RETURN== 0) ? "OK" : "NG");
 	                	result |= ret;
         		}
@@ -399,6 +400,7 @@ int main(int ac, char **av) {
 		        switch(result) {
         		case RESULT_OK:
 					tst_resm(TPASS, "mbind call succeeded --OK-- ");
+					break;
 
 		        default:
                 		tst_resm(TFAIL, "%s failed - errno = %d : %s --NG--", TCID, TEST_ERRNO, strerror(TEST_ERRNO));

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

#1 lore raw
Quoted 45 lines · Zhang Xiliang

I tested ltp mbind case and found the result is error as follows:

mbind01     0  TINFO  :  (case00) START
EXPECT: return value(ret)=0 errno=0 (Success)
RESULT: return value(ret)=0 errno=0 (Success)
mbind01     0  TINFO  :  (case00) END => OK
mbind01     0  TINFO  :  (case01) START
EXPECT: return value(ret)=-1 errno=22 (Invalid argument)
RESULT: return value(ret)=-1 errno=22 (Invalid argument)
mbind01     0  TINFO  :  (case01) END => NG
mbind01     0  TINFO  :  (case02) START
EXPECT: return value(ret)=-1 errno=22 (Invalid argument)
RESULT: return value(ret)=-1 errno=22 (Invalid argument)
mbind01     0  TINFO  :  (case02) END => NG
mbind01     0  TINFO  :  (case03) START
EXPECT: return value(ret)=0 errno=0 (Success)
RESULT: return value(ret)=0 errno=0 (Success)
mbind01     0  TINFO  :  (case03) END => OK
mbind01     0  TINFO  :  (case04) START
EXPECT: return value(ret)=-1 errno=22 (Invalid argument)
RESULT: return value(ret)=-1 errno=22 (Invalid argument)
mbind01     0  TINFO  :  (case04) END => NG
mbind01     0  TINFO  :  (case05) START
EXPECT: return value(ret)=0 errno=0 (Success)
RESULT: return value(ret)=0 errno=0 (Success)
mbind01     0  TINFO  :  (case05) END => OK
mbind01     0  TINFO  :  (case06) START
EXPECT: return value(ret)=0 errno=0 (Success), r/w check=OK
RESULT: return value(ret)=0 errno=0 (Success), r/w check=NG
mbind01     0  TINFO  :  (case06) END => OK
mbind01     0  TINFO  :  (case07) START
EXPECT: return value(ret)=0 errno=0 (Success)
RESULT: return value(ret)=0 errno=0 (Success)
mbind01     0  TINFO  :  (case07) END => OK
mbind01     0  TINFO  :  (case08) START
EXPECT: return value(ret)=-1 errno=22 (Invalid argument)
RESULT: return value(ret)=-1 errno=22 (Invalid argument)
mbind01     0  TINFO  :  (case08) END => NG
mbind01     0  TINFO  :  (case09) START
EXPECT: return value(ret)=-1 errno=22 (Invalid argument)
RESULT: return value(ret)=-1 errno=22 (Invalid argument)
mbind01     0  TINFO  :  (case09) END => NG
mbind01     0  TINFO  :  (case10) START
mbind01     1  TFAIL  :  get_mempolicy failed - errno = 14 : Bad address
Quoted 7 lines

In case01,case02,case04,case08,case09, the expect is same with the result. So these cases should be OK instead of NG.

In sourse code, TEST_RETURN should get value by "ret". By the way, the "switch/case RESULT_OK" missed "break".

Thanks.

Regards--
Subrata

Quoted 28 lines
---
 testcases/kernel/syscalls/mbind/mbind01.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
testcases/kernel/syscalls/mbind/mbind01.c +2 -1
index 2b861ac..94c2dd0 100644
@@ -389,6 +389,7 @@ int main(int ac, char **av) {
         		        int ret;
 	        	        tst_resm(TINFO,"(case%02d) START", i);
         	        	ret = do_test(&tcase[i]);
+				TEST_RETURN = ret;
 	        	        tst_resm(TINFO,"(case%02d) END => %s", i, ( TEST_RETURN== 0) ? "OK" : "NG");
 	                	result |= ret;
         		}
@@ -399,6 +400,7 @@ int main(int ac, char **av) {
 		        switch(result) {
         		case RESULT_OK:
 					tst_resm(TPASS, "mbind call succeeded --OK-- ");
+					break;
 
 		        default:
                 		tst_resm(TFAIL, "%s failed - errno = %d : %s --NG--", TCID, TEST_ERRNO, strerror(TEST_ERRNO));
 
 
 
------------------------------------------------------------------------------
Quoted 8 lines

Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list