sdhci: Add new quirk in sdhci driver and update ADMA descriptor build.
PATCH 1/1 sdhci: Add new quirk in sdhci driver and update ADMA descriptor build.
From: Thomas Abraham <[email protected]>
The s3c6410 sdhci controller does not support the 'End' attribute and NOP attribute in the same 8-Byte ADMA descriptor. This patch adds a new quirk to identify sdhci host contollers with such behaviour. In addition to this, for controllers using the new quirk, the last entry in the ADMA descritor table is marked with the 'End' attribute (instead of using a NOP descriptor with 'End' attribute).
--- drivers/mmc/host/sdhci.c | 35 ++++++++++++++++++++++------------- drivers/mmc/host/sdhci.h | 2 ++ 2 files changed, 24 insertions(+), 13 deletions(-)
drivers/mmc/host/sdhci.c +22 -13
@@ -487,19 +487,28 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,WARN_ON ((desc - host->adma_desc) > (128 *2 +1 ) *4 ); } -/* -* Add a terminating entry. -*/ - desc[7 ] =0 ; - desc[6 ] =0 ; - desc[5 ] =0 ; - desc[4 ] =0 ; - - desc[3 ] =0 ; - desc[2 ] =0 ; - - desc[1 ] =0x00 ; - desc[0 ] =0x03 ;/* nop, end, valid */ +if (host->quirks &SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC ) { +/* +* Mark the last descriptor as the terminating descriptor +*/ +if (desc != host->adma_desc) { + desc -=8 ; + desc[0 ] |=0x2 ;/* end */ + } + }else { +/* +* Add a terminating entry. +*/ + desc[7 ] =0 ; + desc[6 ] =0 ; + desc[5 ] =0 ; + desc[4 ] =0 ; + + desc[3 ] =0 ; + desc[2 ] =0 ; + desc[1 ] =0x00 ; + desc[0 ] =0x03 ;/* nop, end, valid */ + }/* * Resync align buffer as we might have changed it.
drivers/mmc/host/sdhci.h +2 -0
@@ -232,6 +232,8 @@ struct sdhci_host {#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22)/* Controller needs 10ms delay between applying power and clock */ #define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23) +/* Controller cannot support End Attribute in NOP ADMA descriptor */ +#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<24)int irq;/* Device IRQ */ void __iomem * ioaddr;/* Mapped address */
Signature · 1 line
1.5.3.4
PATCH 1/1 sdhci: Add new quirk in sdhci driver and update ADMA descriptor build.
Quoted 8 lines · On Tue, Sep 08, 2009 at 02:41:59PM +0900, [email protected] wrote:
From: Thomas Abraham <[email protected]>
The s3c6410 sdhci controller does not support the 'End' attribute and NOP attribute in the same 8-Byte ADMA descriptor. This patch adds a new quirk to identify sdhci host contollers with such behaviour. In addition to this, for controllers using the new quirk, the last entry in the ADMA descritor table is marked with the 'End' attribute (instead of using a NOP descriptor with 'End' attribute).
This is very useful to know, I'd say this would be a useful quirk to add to the SDHCI driver to see if we can get ADMA working on the S3C64XX series.
Quoted 73 lines
Signed-off-by Thomas Abraham <[email protected]>--- drivers/mmc/host/sdhci.c | 35 ++++++++++++++++++++++------------- drivers/mmc/host/sdhci.h | 2 ++ 2 files changed, 24 insertions(+), 13 deletions(-)drivers/mmc/host/sdhci.c +22
-13@@ -487,19 +487,28 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,WARN_ON ((desc - host->adma_desc) > (128 *2 +1 ) *4 ); } -/* -* Add a terminating entry. -*/ - desc[7 ] =0 ; - desc[6 ] =0 ; - desc[5 ] =0 ; - desc[4 ] =0 ; - - desc[3 ] =0 ; - desc[2 ] =0 ; - - desc[1 ] =0x00 ; - desc[0 ] =0x03 ;/* nop, end, valid */ +if (host->quirks &SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC ) { +/* +* Mark the last descriptor as the terminating descriptor +*/ +if (desc != host->adma_desc) { + desc -=8 ; + desc[0 ] |=0x2 ;/* end */ + } + }else { +/* +* Add a terminating entry. +*/ + desc[7 ] =0 ; + desc[6 ] =0 ; + desc[5 ] =0 ; + desc[4 ] =0 ; + + desc[3 ] =0 ; + desc[2 ] =0 ; + desc[1 ] =0x00 ; + desc[0 ] =0x03 ;/* nop, end, valid */ + }/* * Resync align buffer as we might have changed it. drivers/mmc/host/sdhci.h +2
-0@@ -232,6 +232,8 @@ struct sdhci_host {#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22)/* Controller needs 10ms delay between applying power and clock */ #define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23) +/* Controller cannot support End Attribute in NOP ADMA descriptor */ +#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<24)int irq;/* Device IRQ */ void __iomem * ioaddr;/* Mapped address */ Signature · 7 lines
1.5.3.4 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Signature · 5 lines
-- Ben Q: What's a light-year? A: One-third less calories than a regular year.