Skip to contentSkip to conversation

Phonet: back-end for autoconfigured addresses

PATCH Applied Rémi Denis-Courmont 3 participants 8 messages Sep 9, 2009 – Sep 12, 2009

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 Phonet: back-end for autoconfigured addresses

From: Rémi Denis-Courmont <[email protected]>

In some cases, the network device driver knows what layer-3 address the device should have. This adds support for the Phonet stack to automatically request from the driver and add that address to the network device.

---
 include/linux/phonet.h |   17 +++++++++++++++++
 net/phonet/pn_dev.c    |   26 +++++++++++++++++++++++++-
 2 files changed, 42 insertions(+), 1 deletions(-)
include/linux/phonet.h +17 -0
index ee5e3c9..82b45d1 100644
@@ -170,4 +170,21 @@ static inline __u8 pn_sockaddr_get_resource(const struct sockaddr_pn *spn)
 	return spn->spn_resource;
 }
 
+/* Phonet device ioctl requests */
+#ifdef __KERNEL__
+#define SIOCPNGAUTOCONF		(SIOCDEVPRIVATE + 0)
+
+struct if_phonet_autoconf {
+	uint8_t device;
+};
+
+struct if_phonet_req {
+	char ifr_phonet_name[16];
+	union {
+		struct if_phonet_autoconf ifru_phonet_autoconf;
+	} ifr_ifru;
+};
+#define ifr_phonet_autoconf ifr_ifru.ifru_phonet_autoconf
+#endif /* __KERNEL__ */
+
 #endif
net/phonet/pn_dev.c +25 -1
index 5ae4c01..2f65dca 100644
@@ -28,6 +28,7 @@
 #include <linux/netdevice.h>
 #include <linux/phonet.h>
 #include <linux/proc_fs.h>
+#include <linux/if_arp.h>
 #include <net/sock.h>
 #include <net/netns/generic.h>
 #include <net/phonet/pn_dev.h>
@@ -195,14 +196,37 @@ found:
 	return err;
 }
 
+/* automatically configure a Phonet device, if supported */
+static int phonet_device_autoconf(struct net_device *dev)
+{
+	struct if_phonet_req req;
+	int ret;
+
+	if (!dev->netdev_ops->ndo_do_ioctl)
+		return -EOPNOTSUPP;
+
+	ret = dev->netdev_ops->ndo_do_ioctl(dev, (struct ifreq *)&req,
+						SIOCPNGAUTOCONF);
+	if (ret < 0)
+		return ret;
+	return phonet_address_add(dev, req.ifr_phonet_autoconf.device);
+}
+
 /* notify Phonet of device events */
 static int phonet_device_notify(struct notifier_block *me, unsigned long what,
 				void *arg)
 {
 	struct net_device *dev = arg;
 
-	if (what == NETDEV_UNREGISTER)
+	switch (what) {
+	case NETDEV_REGISTER:
+		if (dev->type == ARPHRD_PHONET)
+			phonet_device_autoconf(dev);
+		break;
+	case NETDEV_UNREGISTER:
 		phonet_device_destroy(dev);
+		break;
+	}
 	return 0;
 
 }
Signature · 1 line
1.6.0.4
#1 lore raw

PATCH 2/2 cdc-phonet: autoconfigure Phonet address

From: Rémi Denis-Courmont <[email protected]>

---
 drivers/net/usb/cdc-phonet.c |   15 +++++++++++++++
 include/linux/phonet.h       |    3 +++
 2 files changed, 18 insertions(+), 0 deletions(-)
drivers/net/usb/cdc-phonet.c +15 -0
index 0ca5916..97e54d9 100644
@@ -27,6 +27,7 @@
 #include <linux/netdevice.h>
 #include <linux/if_arp.h>
 #include <linux/if_phonet.h>
+#include <linux/phonet.h>
 
 #define PN_MEDIA_USB	0x1B
 
@@ -256,6 +257,19 @@ static int usbpn_close(struct net_device *dev)
 	return usb_set_interface(pnd->usb, num, !pnd->active_setting);
 }
 
+static int usbpn_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	struct if_phonet_req *req = (struct if_phonet_req *)ifr;
+
+	switch (cmd) {
+	case SIOCPNGAUTOCONF:
+		req->ifr_phonet_autoconf.device = PN_DEV_PC;
+		printk(KERN_CRIT"device is PN_DEV_PC\n");
+		return 0;
+	}
+	return -ENOIOCTLCMD;
+}
+
 static int usbpn_set_mtu(struct net_device *dev, int new_mtu)
 {
 	if ((new_mtu < PHONET_MIN_MTU) || (new_mtu > PHONET_MAX_MTU))
@@ -269,6 +283,7 @@ static const struct net_device_ops usbpn_ops = {
 	.ndo_open	= usbpn_open,
 	.ndo_stop	= usbpn_close,
 	.ndo_start_xmit = usbpn_xmit,
+	.ndo_do_ioctl	= usbpn_ioctl,
 	.ndo_change_mtu = usbpn_set_mtu,
 };
 
include/linux/phonet.h +3 -0
index 82b45d1..1ef5a07 100644
@@ -99,6 +99,9 @@ struct sockaddr_pn {
 	__u8 spn_zero[sizeof(struct sockaddr) - sizeof(sa_family_t) - 3];
 } __attribute__ ((packed));
 
+/* Well known address */
+#define PN_DEV_PC	0x10
+
 static inline __u16 pn_object(__u8 addr, __u16 port)
 {
 	return (addr << 8) | (port & 0x3ff);
Signature · 1 line
1.6.0.4
#2 lore raw

Re: [PATCH 2/2] cdc-phonet: autoconfigure Phonet address

Hi Remi,

Quoted 23 lines
 drivers/net/usb/cdc-phonet.c |   15 +++++++++++++++
 include/linux/phonet.h       |    3 +++
 2 files changed, 18 insertions(+), 0 deletions(-)
drivers/net/usb/cdc-phonet.c +4 -0
index 0ca5916..97e54d9 100644
@@ -27,6 +27,7 @@
 #include <linux/netdevice.h>
 #include <linux/if_arp.h>
 #include <linux/if_phonet.h>
+#include <linux/phonet.h>
 
 #define PN_MEDIA_USB	0x1B
 
@@ -256,6 +257,19 @@ static int usbpn_close(struct net_device *dev)
 	return usb_set_interface(pnd->usb, num, !pnd->active_setting);
 }
 
+static int usbpn_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	struct if_phonet_req *req = (struct if_phonet_req *)ifr;

drivers/net/usb/cdc-phonet.c static int usbpn_close(struct net_device *dev) · line 272

Quoted 10 lines
drivers/net/usb/cdc-phonet.c +10 -0
+
+	switch (cmd) {
+	case SIOCPNGAUTOCONF:
+		req->ifr_phonet_autoconf.device = PN_DEV_PC;
+		printk(KERN_CRIT"device is PN_DEV_PC\n");
+		return 0;
+	}
+	return -ENOIOCTLCMD;
+}
+

am I understanding this correctly, that even for the USB ones we still have to execute that ioctl() and can not just auto configure them all the time? For the USB ones, I would expect to should plug them in and they are getting configured right away.

Regards

Marcel

#3 lore raw

Re: [PATCH 2/2] cdc-phonet: autoconfigure Phonet address

Quoted 4 lines · Marcel Holtmann

am I understanding this correctly, that even for the USB ones we still have to execute that ioctl() and can not just auto configure them all the time? For the USB ones, I would expect to should plug them in and they are getting configured right away.

The other patch makes the stack use the ioctl() internally. But now I see that I forgot some debug statement :(

Still, something needs to ifconfig up/ip link set up.

Signature · 1 line
Rémi Denis-Courmont
#4 lore raw

Re: [PATCH 2/2] cdc-phonet: autoconfigure Phonet address

Hi Remi,

Quoted 9 lines
Quoted 4 lines

am I understanding this correctly, that even for the USB ones we still have to execute that ioctl() and can not just auto configure them all the time? For the USB ones, I would expect to should plug them in and they are getting configured right away.

The other patch makes the stack use the ioctl() internally. But now I see that I forgot some debug statement :(

Still, something needs to ifconfig up/ip link set up.

the ifup/ifdown is fine. And if the addresses get set when I plug the device in, that looks good to me.

Regards

Marcel

#6 lore raw

Re: [PATCH 2/2] cdc-phonet: autoconfigure Phonet address

Le vendredi 11 septembre 2009 22:38:35 David Miller, vous avez écrit :

Quoted 8 lines

From: Rémi Denis-Courmont <[email protected]>
Date: Wed, 9 Sep 2009 13:00:06 +0300

Quoted 3 lines

From: Rémi Denis-Courmont <[email protected]>

Applied.

THanks and oops, I just had an updated patch set coming. I guess I will rebase it then.

Signature · 2 lines
Rémi Denis-Courmont
http://www.remlab.net/
maintainer Applied
#7 lore raw
In reply to Rémi Denis-Courmont

From: Rémi Denis-Courmont <[email protected]>
Date: Wed, 9 Sep 2009 13:00:05 +0300

Quoted 8 lines

From: Rémi Denis-Courmont <[email protected]>

In some cases, the network device driver knows what layer-3 address the device should have. This adds support for the Phonet stack to automatically request from the driver and add that address to the network device.

Applied.