Skip to contentSkip to conversation

ppc/85xx: add boot from NAND/eSDHC/eSPI support

PATCH Superseded Kumar Gala 1 participant 2 messages Sep 11, 2009 – Sep 16, 2009 Char and misc drivers

lore
Share & tools
lore

Kumar Gala

author
#0 lore raw

PATCH v4 1/1 ppc/85xx: add boot from NAND/eSDHC/eSPI support

From: Mingkai Hu <[email protected]>

The MPC8536E is capable of booting form NAND/eSDHC/eSPI, this patch implements these three bootup methods in a unified way - all of these use the general cpu/mpc85xx/start.S, and load the main image to L2SRAM which lets us use the SPD to initialize the SDRAM.

For all three bootup methods, the bootup process can be divided into two
stages: the first stage will initialize the corresponding controller, configure the L2SRAM, then copy the second stage image to L2SRAM and jump to it. The second stage image is just like the general U-Boot image to configure all the hardware and boot up to U-Boot command line.

When boot from NAND, the eLBC controller will first load the first stage image to internal 4K RAM buffer because it's also stored on the NAND flash. The first stage image, also call 4K NADN loader, will initialize the L2SRAM, load the second stage image to L2SRAM and jump to it. The 4K NAND loader's code comes from the corresponding nand_spl directory, along with the code twisted by CONFIG_NAND_SPL.

When boot from eSDHC/eSPI, there's no such a first stage image because the CPU ROM code does the same work. It will initialize the L2SRAM according to the config addr/word pairs on the fixed address and initialize the eSDHC/eSPI controller, then load the second stage image to L2SRAM and jump to it.

The macro CONFIG_SYS_RAMBOOT is used to control the code to produce the second stage image for all different bootup methods. It's set in the board config file when one of the bootup methods above is selected.

---
* Merged in changes from other patch into u-boot-nand.lds
* Fixed up and simplified tlb.c changes

- k

 cpu/mpc85xx/cpu_init.c      |   19 ++++++
 cpu/mpc85xx/start.S         |   23 +++++++-
 cpu/mpc85xx/tlb.c           |    2 +
 cpu/mpc85xx/u-boot-nand.lds |  138 +++++++++++++++++++++++++++++++++++++++++++
 drivers/misc/fsl_law.c      |    2 +
 5 files changed, 183 insertions(+), 1 deletions(-)
 create mode 100644 cpu/mpc85xx/u-boot-nand.lds
cpu/mpc85xx/cpu_init.c +19 -0
index a54cf5d..5f66511 100644
@@ -291,6 +291,25 @@ int cpu_init_r(void)
 
 	asm("msync;isync");
 	cache_ctl = l2cache->l2ctl;
+
+#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
+	if (cache_ctl & MPC85xx_L2CTL_L2E) {
+		/* Clear L2 SRAM memory-mapped base address */
+		out_be32(&l2cache->l2srbar0, 0x0);
+		out_be32(&l2cache->l2srbar1, 0x0);
+
+		/* set MBECCDIS=0, SBECCDIS=0 */
+		clrbits_be32(&l2cache->l2errdis,
+				(MPC85xx_L2ERRDIS_MBECC |
+				 MPC85xx_L2ERRDIS_SBECC));
+
+		/* set L2E=0, L2SRAM=0 */
+		clrbits_be32(&l2cache->l2ctl,
+				(MPC85xx_L2CTL_L2E |
+				 MPC85xx_L2CTL_L2SRAM_ENTIRE));
+	}
+#endif
+
 	l2siz_field = (cache_ctl >> 28) & 0x3;
 
 	switch (l2siz_field) {
cpu/mpc85xx/start.S +22 -1
index eeee7a9..c9e91a9 100644
@@ -57,10 +57,12 @@
 	GOT_ENTRY(_GOT2_TABLE_)
 	GOT_ENTRY(_FIXUP_TABLE_)
 
+#ifndef CONFIG_NAND_SPL
 	GOT_ENTRY(_start)
 	GOT_ENTRY(_start_of_vectors)
 	GOT_ENTRY(_end_of_vectors)
 	GOT_ENTRY(transfer_to_handler)
+#endif
 
 	GOT_ENTRY(__init_end)
 	GOT_ENTRY(_end)
@@ -239,10 +241,11 @@ _start_e500:
 
 #endif /* CONFIG_MPC8569 */
 
-	/* create a temp mapping in AS=1 to the 4M boot window */
 	lis     r6,FSL_BOOKE_MAS0(1, 15, 0)@h
 	ori     r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l
 
+#ifndef CONFIG_SYS_RAMBOOT
+	/* create a temp mapping in AS=1 to the 4M boot window */
 	lis     r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h
 	ori     r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l
 
@@ -252,6 +255,20 @@ _start_e500:
 	/* The 85xx has the default boot window 0xff800000 - 0xffffffff */
 	lis     r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
 	ori     r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+#else
+	/*
+	 * create a temp mapping in AS=1 to the 1M TEXT_BASE space, the main
+	 * image has been relocated to TEXT_BASE on the second stage.
+	 */
+	lis     r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
+	ori     r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
+
+	lis     r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@h
+	ori     r8,r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@l
+
+	lis     r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
+	ori     r9,r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+#endif
 
 	mtspr   MAS0,r6
 	mtspr   MAS1,r7
@@ -363,6 +380,7 @@ _start_cont:
 	bl	board_init_f
 	isync
 
+#ifndef CONFIG_NAND_SPL
 	. = EXC_OFF_SYS_RESET
 	.globl	_start_of_vectors
 _start_of_vectors:
@@ -817,6 +835,7 @@ in32:
 in32r:
 	lwbrx	r3,r0,r3
 	blr
+#endif  /* !CONFIG_NAND_SPL */
 
 /*------------------------------------------------------------------------------*/
 
@@ -1001,6 +1020,7 @@ clear_bss:
 	mr	r4,r10		/* Destination Address		*/
 	bl	board_init_r
 
+#ifndef CONFIG_NAND_SPL
 	/*
 	 * Copy exception vector code to low memory
 	 *
@@ -1154,3 +1174,4 @@ setup_ivors:
 
 #include "fixed_ivor.S"
 	blr
+#endif /* !CONFIG_NAND_SPL */
cpu/mpc85xx/tlb.c +2 -0
index 44e80b1..6e94c23 100644
@@ -55,6 +55,7 @@ void init_tlbs(void)
 	return ;
 }
 
+#ifndef CONFIG_NAND_SPL
 void set_tlb(u8 tlb, u32 epn, u64 rpn,
 	     u8 perms, u8 wimge,
 	     u8 ts, u8 esel, u8 tsize, u8 iprot)
@@ -209,3 +210,4 @@ unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg)
 	 */
 	return memsize_in_meg;
 }
+#endif /* !CONFIG_NAND_SPL */
cpu/mpc85xx/u-boot-nand.lds new file +138 -0

138 lines not on this page · raw message

drivers/misc/fsl_law.c +2 -0
index 7bdd355..aa877c6 100644
@@ -74,6 +74,7 @@ int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
 	return idx;
 }
 
+#ifndef CONFIG_NAND_SPL
 int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
 {
 	u32 idx;
@@ -166,6 +167,7 @@ int set_ddr_laws(u64 start, u64 sz, enum law_trgt_if id)
 
 	return 0;
 }
+#endif
 
 void init_laws(void)
 {
Signature · 1 line
1.6.0.6
author Applied
#1 lore raw

PATCH v4 1/1 ppc/85xx: add boot from NAND/eSDHC/eSPI support

Quoted 37 lines · Kumar Gala

From: Mingkai Hu <[email protected]>

The MPC8536E is capable of booting form NAND/eSDHC/eSPI, this patch implements these three bootup methods in a unified way - all of these use the general cpu/mpc85xx/start.S, and load the main image to L2SRAM which lets us use the SPD to initialize the SDRAM.

For all three bootup methods, the bootup process can be divided into two
stages: the first stage will initialize the corresponding controller, configure the L2SRAM, then copy the second stage image to L2SRAM and jump to it. The second stage image is just like the general U-Boot image
to configure all the hardware and boot up to U-Boot command line.

When boot from NAND, the eLBC controller will first load the first stage
image to internal 4K RAM buffer because it's also stored on the NAND flash. The first stage image, also call 4K NADN loader, will initialize
the L2SRAM, load the second stage image to L2SRAM and jump to it. The 4K
NAND loader's code comes from the corresponding nand_spl directory, along
with the code twisted by CONFIG_NAND_SPL.

When boot from eSDHC/eSPI, there's no such a first stage image because the CPU ROM code does the same work. It will initialize the L2SRAM according to the config addr/word pairs on the fixed address and initialize the eSDHC/eSPI controller, then load the second stage image to L2SRAM and jump to it.

The macro CONFIG_SYS_RAMBOOT is used to control the code to produce the
second stage image for all different bootup methods. It's set in the board config file when one of the bootup methods above is selected.

Quoted 7 lines

---
* Merged in changes from other patch into u-boot-nand.lds
* Fixed up and simplified tlb.c changes

- k

applied to 85xx

- k