linux-next: Tree for September 7
Subsystems (6)
Hi all,
Changes since 20090904:
The acpi tree still has a build failure so I used the version from next-20090831.
The async_tx tree gained a build failure so I used the version from next-20090904.
The mtd tree gained a conflict against the i2c tree.
The battery tree gained a conflict against Linus' tree.
The slab tree exposed a build failure in the wireless tree, so I reverted a commit from there.
The security-testing tree lost its build failure but gained another for which I reverted a commit.
The trivial tree gained conflicts against the scsi and arm trees.
The percpu tree gained a conflict against Linus' tree.
The tty tree gained a conflict against Linus' tree.
The scsi-post-merge tree gained a build failure for which I reverted a commit.
----------------------------------------------------------------------------
I have created today's linux-next tree atgit://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
(patches at http://www.kernel.org/pub/linux/kernel/v2.6/next/ ). If you are tracking the linux-next tree using git, you should not use "git pull" to do so as that will try to merge the new linux-next release with the old one. You should use "git fetch" as mentioned in the FAQ on the wiki (see below).
You can see which trees have been included by looking in the Next/Trees file in the source. There are also quilt-import.log and merge.log files in the Next directory. Between each merge, the tree was built with a ppc64_defconfig for powerpc and an allmodconfig for x86_64. After the final fixups (if any), it is also built with powerpc allnoconfig (32 and 64 bit), ppc44x_defconfig and allyesconfig (minus CONFIG_PROFILE_ALL_BRANCHES - this fails its final link) and i386, sparc and sparc64 defconfig. These builds also have CONFIG_ENABLE_WARN_DEPRECATED, CONFIG_ENABLE_MUST_CHECK and CONFIG_DEBUG_INFO disabled when necessary.
Below is a summary of the state of the merge.
We are up to 141 trees (counting Linus' and 21 trees of patches pending for Linus' tree), more are welcome (even if they are currently empty). Thanks to those who have contributed, and to those who haven't, please do.
Status of my local build tests will be at
http://kisskb.ellerman.id.au/linux-next . If maintainers want to give advice about cross compilers/configs that work, we are always open to add more builds.
Thanks to Jan Dittmer for adding the linux-next tree to his build tests at http://l4x.org/k/ , the guys at http://test.kernel.org/ and Randy Dunlap for doing many randconfig builds.
There is a wiki covering stuff to do with linux-next at
http://linux.f-seidel.de/linux-next/pmwiki/ . Thanks to Frank Seidel.
Signature · 203 lines
Cheers, Stephen Rothwell [email protected] $ git checkout master $ git reset --hard stable Merging origin/master Merging fixes/fixes Merging arm-current/master Merging m68k-current/for-linus Merging powerpc-merge/merge Merging sparc-current/master Merging scsi-rc-fixes/master Merging net-current/master Merging sound-current/for-linus Merging pci-current/for-linus Merging wireless-current/master Merging kbuild-current/master Merging quilt/driver-core.current Merging quilt/tty.current Merging quilt/usb.current Merging cpufreq-current/fixes Merging input-current/for-linus Merging md-current/for-linus Merging audit-current/for-linus Merging crypto-current/master Merging ide-curent/master Merging dwmw2/master Merging arm/devel Merging davinci/for-next Merging pxa/for-next Merging thumb-2/thumb-2 Merging avr32/avr32-arch Merging blackfin/for-linus Merging cris/for-next Merging ia64/test Merging m68k/for-next Merging m68knommu/for-next Merging microblaze/next Merging mips/mips-for-linux-next Merging parisc/next Merging powerpc/next CONFLICT (content): Merge conflict in kernel/gcov/Kconfig Merging 4xx/next Merging galak/next Merging s390/features Merging sh/master Merging sparc/master Merging xtensa/master Merging cifs/master Merging configfs/linux-next Merging ecryptfs/next Merging ext3/for_next Merging ext4/next Merging fatfs/master Merging fuse/for-next Merging gfs2/master Merging jfs/next Merging nfs/linux-next Merging nfsd/nfsd-next CONFLICT (content): Merge conflict in net/sunrpc/cache.c Merging nilfs2/for-next Merging ocfs2/linux-next Merging squashfs/master Merging udf/for_next Merging v9fs/for-next Merging ubifs/linux-next Merging xfs/master CONFLICT (content): Merge conflict in fs/xfs/linux-2.6/xfs_lrw.c Merging reiserfs-bkl/reiserfs/kill-bkl Merging vfs/for-next Merging pci/linux-next CONFLICT (content): Merge conflict in arch/powerpc/kernel/pci_64.c Applying: pci: merge fixup for fundamental reset conflict with powerpc tree Merging hid/for-next Merging quilt/i2c Merging quilt/jdelvare-hwmon Merging quilt/kernel-doc Merging v4l-dvb/master CONFLICT (content): Merge conflict in drivers/media/video/gspca/Kconfig CONFLICT (content): Merge conflict in drivers/media/video/sh_mobile_ceu_camera.c Merging quota/for_next Merging kbuild/master Merging kconfig/for-next CONFLICT (content): Merge conflict in scripts/extract-ikconfig Merging ide/master Merging libata/NEXT Merging infiniband/for-next Merging acpi/test $ git reset --hard HEAD^ Merging refs/next/20090831/acpi Merging ieee1394/for-next Merging ubi/linux-next Merging kvm/master Merging dlm/next Merging scsi/master Merging async_tx/next $ git reset --hard HEAD^ Merging refs/next/20090904/async_tx Merging net/master Merging wireless/master Merging mtd/master CONFLICT (content): Merge conflict in drivers/mtd/mtdcore.c Merging crypto/master Merging sound/for-next Merging cpufreq/next Merging quilt/rr CONFLICT (content): Merge conflict in drivers/net/virtio_net.c Merging mmc/next Merging input/next CONFLICT (content): Merge conflict in drivers/base/platform.c Merging lsm/for-next Merging block/for-next CONFLICT (content): Merge conflict in fs/ubifs/super.c Merging quilt/device-mapper Merging embedded/master Merging firmware/master Merging pcmcia/master Merging battery/master CONFLICT (content): Merge conflict in drivers/power/wm97xx_battery.c Merging leds/for-mm Merging backlight/for-mm Merging kgdb/kgdb-next Merging slab/for-next [master 81a4eb7] Revert "cfg80211: clear cfg80211_inform_bss() from kmemleak reports" Merging uclinux/for-next Merging md/for-next Merging mfd/for-next CONFLICT (content): Merge conflict in drivers/input/misc/Kconfig Merging hdlc/hdlc-next Merging drm/drm-next CONFLICT (content): Merge conflict in firmware/Makefile Merging voltage/for-next CONFLICT (content): Merge conflict in drivers/regulator/Kconfig Merging security-testing/next CONFLICT (content): Merge conflict in arch/arm/kernel/signal.c CONFLICT (content): Merge conflict in arch/parisc/include/asm/thread_info.h CONFLICT (content): Merge conflict in arch/parisc/kernel/entry.S CONFLICT (content): Merge conflict in arch/parisc/kernel/signal.c Applying: security: fix merge for tun_struct changes Merging lblnet/master CONFLICT (content): Merge conflict in drivers/net/tun.c Merging agp/agp-next CONFLICT (content): Merge conflict in drivers/char/agp/uninorth-agp.c Merging uwb/for-upstream Merging watchdog/master Merging bdev/master Merging dwmw2-iommu/master Merging cputime/cputime Merging osd/linux-next Merging jc_docs/docs-next Merging nommu/master Merging trivial/for-next CONFLICT (delete/modify): arch/arm/mach-w90x900/w90p910.c deleted in HEAD and modified in trivial/for-next. Version trivial/for-next of arch/arm/mach-w90x900/w90p910.c left in tree. CONFLICT (content): Merge conflict in drivers/scsi/mpt2sas/mpt2sas_scsih.c $ git rm -f arch/arm/mach-w90x900/w90p910.c Merging audit/for-next Merging omap/for-next Merging quilt/aoe Merging suspend/linux-next Merging bluetooth/master Merging fsnotify/for-next Merging irda/for-next Merging hwlat/for-linus Merging drbd/drbd Merging kmemleak/kmemleak Merging tip/auto-latest CONFLICT (content): Merge conflict in arch/x86/include/asm/socket.h CONFLICT (content): Merge conflict in arch/x86/kernel/setup.c CONFLICT (content): Merge conflict in drivers/pci/dmar.c CONFLICT (content): Merge conflict in drivers/pci/intel-iommu.c CONFLICT (content): Merge conflict in include/linux/rcupdate.h CONFLICT (content): Merge conflict in kernel/fork.c Applying: tip: fix merge for cupmask update Merging oprofile/for-next CONFLICT (content): Merge conflict in kernel/trace/ring_buffer.c Merging edac-amd/for-next CONFLICT (content): Merge conflict in arch/x86/kernel/smpboot.c CONFLICT (content): Merge conflict in include/linux/topology.h Merging percpu/for-next CONFLICT (content): Merge conflict in arch/sh/kernel/vmlinux.lds.S CONFLICT (content): Merge conflict in kernel/sched.c CONFLICT (content): Merge conflict in mm/percpu.c Merging sfi/sfi-test CONFLICT (content): Merge conflict in arch/x86/kernel/setup.c Merging asm-generic/next Merging hwpoison/hwpoison Merging quilt/driver-core CONFLICT (content): Merge conflict in drivers/base/class.c CONFLICT (content): Merge conflict in drivers/mtd/mtdcore.c CONFLICT (content): Merge conflict in init/main.c Merging quilt/tty CONFLICT (content): Merge conflict in arch/x86/include/asm/termios.h CONFLICT (content): Merge conflict in drivers/char/n_tty.c Merging quilt/usb Merging quilt/staging CONFLICT (delete/modify): drivers/staging/at76_usb/at76_usb.c deleted in quilt/staging and modified in HEAD. Version HEAD of drivers/staging/at76_usb/at76_usb.c left in tree. CONFLICT (delete/modify): drivers/staging/epl/VirtualEthernetLinux.c deleted in quilt/staging and modified in HEAD. Version HEAD of drivers/staging/epl/VirtualEthernetLinux.c left in tree. $ git rm -f drivers/staging/epl/VirtualEthernetLinux.c $ git rm -f drivers/staging/at76_usb/at76_usb.c Merging scsi-post-merge/master [master 229d357] Revert "[SCSI] be2iscsi: add 10Gbps iSCSI - BladeEngine 2 driver" [master e8d0b8f] Revert "KEYS: security_cred_alloc_blank() should return int under all circumstances" [master a383b61] Revert "KEYS: Add a keyctl to install a process's session keyring on its parent [try #6]"
Next Sept 7: Bug : skb_release_head_state on x86
Today's next kernel running on a x86 box crashed with
BUG: unable to handle kernel paging request at 00010090 IP: [<c034559d>] skb_release_head_state+0x20/0xac *pdpt = 000000003455c001 *pde = 0000000000000000 Oops: 0002 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu3/topology/core_siblings Modules linked in: ipv6 microcode fuse loop dm_mod ppdev rtc_cmos i2c_piix4
rtc_core i2c_core rtc_lib button sr_mod tg3 parport_pc sworks_agp cdrom floppy parport agpgart pcspkr libphy sg ohci_hcd ehci_hcd sd_mod crc_t10dif usbcore edd fan ide_pci_generic serverworks ide_core ata_generic pata_serverworks libata ips scsi_mod thermal processor thermal_sys hwmon [last unloaded:speedstep_lib]
Pid: 6, comm: ksoftirqd/1 Not tainted (2.6.31-rc9-autotest-next-20090907-5-pae #1) eserver xSeries 235 -[86717AX]-
EIP: 0060:[<c034559d>] EFLAGS: 00010206 CPU: 1
EIP is at skb_release_head_state+0x20/0xac
EAX: 00000000 EBX: f44b5200 ECX: f44b5200 EDX: 00010090
ESI: f5548000 EDI: 00000000 EBP: f5c69dd4 ESP: f5c69dd0
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process ksoftirqd/1 (pid: 6, ti=f5c68000 task=f5c4f280 task.ti=f5c68000)
Stack: f44b5200 f5c69de0 c0345398 f5c69e48 f5c69de8 c034542e f5c69e58 c0388807 <0> f44b5200 f5582900 ced1a038 c07ac124 ced1a030 3e6f7c09 eb152044 f4b4bc00 <0> 00000006 c05a594c f5c69e30 c036a2c0 c07ac124 f4b4bc00 f4b4bc00 eb152030 Call Trace: [<c0345398>] ? __kfree_skb+0xb/0x71 [<c034542e>] ? consume_skb+0x30/0x32 [<c0388807>] ? arp_process+0x572/0x58e [<c036a2c0>] ? ip_local_deliver_finish+0x143/0x207 [<c0388907>] ? arp_rcv+0xda/0xed [<c034bdc2>] ? netif_receive_skb+0x43a/0x459 [<c034bee4>] ? napi_skb_finish+0x1e/0x33 [<c034c267>] ? napi_gro_receive+0x20/0x24 [<f8b3667f>] ? tg3_poll+0x5ed/0x802 [tg3] [<c034c351>] ? net_rx_action+0x93/0x173 [<c013769c>] ? __do_softirq+0xa7/0x144 [<c013775f>] ? do_softirq+0x26/0x2b [<c01377ae>] ? ksoftirqd+0x4a/0xae [<c0137764>] ? ksoftirqd+0x0/0xae [<c0146a2e>] ? kthread+0x61/0x66 [<c01469cd>] ? kthread+0x0/0x66 [<c0103507>] ? kernel_thread_helper+0x7/0x10 Code: fe ff ff 83 c4 0c 5b 5e 5f 5d c3 55 89 e5 53 89 c3 8b 40 18 85 c0 74 05
e8 22 ae 00 00 8b 53 1c c7 43 18 00 00 00 00 85 d2 74 11 <f0> ff 0a 0f 94 c0 84 c0 74 07 89 d0 e8 81 c6 05 00 83 7b 6c 00
EIP: [<c034559d>] skb_release_head_state+0x20/0xac SS:ESP 0068:f5c69dd0
CR2: 0000000000010090
---[ end trace 64c8710cf222dc04 ]---
At the time of crash, kernbench was running on this box.
The corresponding c code is :
0000000000002387 <skb_release_head_state>:
static void skb_release_head_state(struct sk_buff *skb) {
2387: 55 push %rbp 2388: 48 89 e5 mov %rsp,%rbp 238b: 53 push %rbx 238c: 48 89 fb mov %rdi,%rbx 238f: 48 83 ec 08 sub $0x8,%rsp
skb_dst_drop():/usr/local/autobench/var/tmp/build/linux/include/net/dst.h:179 }
...... <SNIP> ......
...... <SNIP> ......
skb_release_head_state():/usr/local/autobench/var/tmp/build/linux/net/core/skbuff.c:395
skb_dst_drop(skb);
#ifdef CONFIG_XFRM
secpath_put(skb->sp);
23a1: 48 8b 7b 30 mov 0x30(%rbx),%rdi
skb_dst_drop():
/usr/local/autobench/var/tmp/build/linux/include/net/dst.h:181
skb->_skb_dst = 0UL; 23a5: 48 c7 43 28 00 00 00 movq $0x0,0x28(%rbx)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This line
23ac: 00
Let me know what other information is required to debug this.
Thanks
-Sachin
Signature · 6 lines
--------------------------------- Sachin Sant IBM Linux Technology Center India Systems and Technology Labs Bangalore, India ---------------------------------
Re: Next Sept 7: Bug : skb_release_head_state on x86
Quoted 25 lines · Sachin Sant
Today's next kernel running on a x86 box crashed with
BUG: unable to handle kernel paging request at 00010090 IP: [<c034559d>] skb_release_head_state+0x20/0xac *pdpt = 000000003455c001 *pde = 0000000000000000 Oops: 0002 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu3/topology/core_siblings Modules linked in: ipv6 microcode fuse loop dm_mod ppdev rtc_cmos i2c_piix4
rtc_corei2c_corertc_libbuttonsr_modtg3parport_pcsworks_agpcdrom floppy
parport agpgart pcspkr libphy sgohci_hcdehci_hcdsd_modcrc_t10difusbcore
edd fanide_pci_genericserverworkside_coreata_genericpata_serverworkslibata ipsscsi_modthermal processorthermal_syshwmon [last unloaded:speedstep_lib]Pid: 6, comm: ksoftirqd/1 Not tainted (2.6.31-rc9-autotest-next-20090907-5-pae
#1) eserver xSeries 235 -[86717AX]-
EIP: 0060:[<c034559d>] EFLAGS: 00010206 CPU: 1
EIP is atskb_release_head_state+0x20/0xac
EAX: 00000000 EBX:f44b5200ECX:f44b5200EDX: 00010090
ESI:f5548000EDI: 00000000 EBP:f5c69dd4ESP:f5c69dd0
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process ksoftirqd/1 (pid: 6, ti=f5c68000 task=f5c4f280 task.ti=f5c68000)
Quoted 5 lines
Stack: f44b5200 f5c69de0 c0345398 f5c69e48 f5c69de8 c034542e f5c69e58 c0388807 <0> f44b5200 f5582900 ced1a038 c07ac124 ced1a030 3e6f7c09 eb152044 f4b4bc00 <0> 00000006 c05a594c f5c69e30 c036a2c0 c07ac124 f4b4bc00 f4b4bc00 eb152030 Call Trace:
This is a crash on a 32bit kernel
Quoted 24 lines
[<
c0345398>] ?__kfree_skb+0xb/0x71[<c034542e>] ?consume_skb+0x30/0x32[<c0388807>] ?arp_process+0x572/0x58e[<c036a2c0>] ?ip_local_deliver_finish+0x143/0x207[<c0388907>] ?arp_rcv+0xda/0xed[<c034bdc2>] ?netif_receive_skb+0x43a/0x459[<c034bee4>] ?napi_skb_finish+0x1e/0x33[<c034c267>] ?napi_gro_receive+0x20/0x24[<f8b3667f>] ?tg3_poll+0x5ed/0x802[tg3] [<c034c351>] ?net_rx_action+0x93/0x173[<c013769c>] ?__do_softirq+0xa7/0x144[<c013775f>] ?do_softirq+0x26/0x2b[<c01377ae>] ?ksoftirqd+0x4a/0xae[<c0137764>] ?ksoftirqd+0x0/0xae[<c0146a2e>] ?kthread+0x61/0x66[<c01469cd>] ?kthread+0x0/0x66[<c0103507>] ?kernel_thread_helper+0x7/0x10Code: fe ff ff 83 c4 0c 5b 5e 5f 5d c3 55 89 e5 53 89 c3 8b 40 18 85 c074 05
e8 22 ae 00 00 8b 53 1c c7 43 18 00 00 00 00 85 d2 74 11 <f0> ff 0a 0f 94 c0 84
c0 74 07 89 d0 e8 81 c6 05 00 83 7b 6c 00
EIP: [<c034559d>]skb_release_head_state+0x20/0xacSS:ESP 0068:f5c69dd0
CR2: 0000000000010090
Quoted 7 lines
---[ end trace 64c8710cf222dc04 ]---At the time of crash, kernbench was running on this box.
The corresponding c code is :
0000000000002387 <skb_release_head_state>:
static voidskb_release_head_state(struct sk_buff *skb){
and you decode a 64 bits kernel
Quoted 20 lines
2387: 55 push %rbp 2388: 48 89
e5 mov %rsp,%rbp
238b: 53 push %rbx 238c: 48 89
fb mov %rdi,%rbx
238f: 48 83 ec 08 sub $0x8,%rspskb_dst_drop():/usr/local/autobench/var/tmp/build/linux/include/net/dst.h:179}
...... <SNIP> ......
...... <SNIP> ......
skb_release_head_state():/usr/local/autobench/var/tmp/build/linux/net/core/skbuff.c:395skb_dst_drop(skb); #ifdef CONFIG_XFRM secpath_put(skb->sp); 23a1: 48 8b 7b 30 mov 0x30(%rbx),%rdi skb_dst_drop(): /usr/local/autobench/var/tmp/build/linux/include/net/dst.h:181 skb->_skb_dst = 0UL;
Quoted 4 lines
23a5: 48 c7 43 28 00 00 00 movq $0x0,0x28(%rbx)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This line
23ac: 00
This is more probably
<f0> ff 0a lock decl (%edx)
part of :
secpath_put(skb->sp);
So some skb has a strange/buggy skb->sp (value 0x00010090)
It looks like skb->cb[xxx] overwrote skb->sp
Please check you have CONFIG_XFRM=y, and that you did rebuild all your modules after patching your kernel...
Re: Next Sept 7: Bug : skb_release_head_state on x86
Quoted 2 lines · Eric Dumazet
and you decode a 64 bits kernel
OOPS. Sorry about that. I had next running on 32 and 64 bit machines and goofed up while collecting the disassembly.
Quoted 8 lines
This is more probably
<f0> ff 0a lock decl (%edx)
part of :
secpath_put(skb->sp);
Yup this is what shows up when looking at correct disassembly.
Quoted 8 lines
So some skb has a strange/buggy
skb->sp(value0x00010090)It looks like skb->cb[xxx] overwrote
skb->spPlease check you have
CONFIG_XFRM=y, and that you did rebuild all your modules after patching your kernel...
Yes, CONFIG_XFRM is enabled. Earlier next kernels did not have this problem. The last one i tried successfully was 0902. 0904 had some build failure (related to net/3c503.c) hence could not boot test that.
Will try to boot 0904 and will check if the same problem can be recreated.
I have attached the config file used.
Thanks
-Sachin
Signature · 6 lines
--------------------------------- Sachin Sant IBM Linux Technology Center India Systems and Technology Labs Bangalore, India ---------------------------------
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.31-rc9
# Mon Sep 7 17:25:57 2009
#
# CONFIG_64BIT is not setCONFIG_X86_32=y
# CONFIG_X86_64 is not setCONFIG_X86=yCONFIG_OUTPUT_FORMAT="elf32-i386" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_HWEIGHT=yCONFIG_GENERIC_GPIO=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_32_SMP=yCONFIG_X86_HT=yCONFIG_X86_TRAMPOLINE=yCONFIG_X86_32_LAZY_GS=yCONFIG_KTIME_SCALAR=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION="-5-pae"
# CONFIG_LOCALVERSION_AUTO is not setCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not setCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=yCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=yCONFIG_TASK_XACCT=yCONFIG_TASK_IO_ACCOUNTING=yCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_WATCH=yCONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not setCONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not setCONFIG_IKCONFIG=yCONFIG_IKCONFIG_PROC=yCONFIG_LOG_BUF_SHIFT=17CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=yCONFIG_GROUP_SCHED=yCONFIG_FAIR_GROUP_SCHED=yCONFIG_RT_GROUP_SCHED=y
# CONFIG_USER_SCHED is not setCONFIG_CGROUP_SCHED=yCONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not setCONFIG_CGROUP_NS=yCONFIG_CGROUP_FREEZER=yCONFIG_CGROUP_DEVICE=yCONFIG_CPUSETS=yCONFIG_PROC_PID_CPUSET=yCONFIG_CGROUP_CPUACCT=yCONFIG_RESOURCE_COUNTERS=yCONFIG_CGROUP_MEM_RES_CTLR=yCONFIG_CGROUP_MEM_RES_CTLR_SWAP=yCONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED_V2 is not setCONFIG_RELAY=yCONFIG_NAMESPACES=yCONFIG_UTS_NS=yCONFIG_IPC_NS=yCONFIG_USER_NS=yCONFIG_PID_NS=yCONFIG_NET_NS=yCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=yCONFIG_RD_BZIP2=yCONFIG_RD_LZMA=yCONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_SYSCTL=yCONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not setCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not setCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_HAVE_PERF_COUNTERS=y
#
# Performance Counters
#CONFIG_PERF_COUNTERS=yCONFIG_EVENT_PROFILE=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_PCI_QUIRKS=y
# CONFIG_STRIP_ASM_SYMS is not setCONFIG_COMPAT_BRK=y
# CONFIG_SLAB_ALLOCATOR is not set
# CONFIG_SLUB_ALLOCATOR is not setCONFIG_SLQB_ALLOCATOR=yCONFIG_SLQB=y
# CONFIG_SLOB is not setCONFIG_PROFILING=yCONFIG_TRACEPOINTS=yCONFIG_MARKERS=yCONFIG_OPROFILE=m
# CONFIG_OPROFILE_IBS is not set
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not setCONFIG_HAVE_OPROFILE=yCONFIG_KPROBES=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_KRETPROBES=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_ATTRS=yCONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not setCONFIG_SLOW_WORK=yCONFIG_HAVE_GENERIC_DMA_COHERENT=yCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULES=yCONFIG_MODULE_FORCE_LOAD=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=yCONFIG_MODVERSIONS=yCONFIG_MODULE_SRCVERSION_ALL=yCONFIG_STOP_MACHINE=yCONFIG_BLOCK=yCONFIG_LBDAF=yCONFIG_BLK_DEV_BSG=yCONFIG_BLK_DEV_INTEGRITY=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"CONFIG_FREEZER=y
#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set CONFIG_X86_MPPARSE=yCONFIG_X86_BIGSMP=y CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_MRST is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_32_NON_STANDARD is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set CONFIG_MEMTEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not setCONFIG_M586=y
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set CONFIG_X86_GENERIC=yCONFIG_X86_CPU=y CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_X86_XADD=yCONFIG_X86_PPRO_FENCE=y CONFIG_X86_F00F_BUG=y CONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=y CONFIG_X86_ALIGNMENT_16=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_CYRIX_32=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=y CONFIG_CPU_SUP_TRANSMETA_32=y CONFIG_CPU_SUP_UMC_32=yCONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set CONFIG_NR_CPUS=128CONFIG_SCHED_SMT=yCONFIG_SCHED_MC=yCONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set CONFIG_X86_MCE=yCONFIG_X86_MCE_INTEL=yCONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set CONFIG_X86_THERMAL_VECTOR=yCONFIG_VM86=yCONFIG_TOSHIBA=mCONFIG_I8K=mCONFIG_X86_REBOOTFIXUPS=yCONFIG_MICROCODE=mCONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=mCONFIG_X86_CPUID=m
# CONFIG_X86_CPU_DEBUG is not set
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set CONFIG_HIGHMEM64G=y CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_HIGHMEM=yCONFIG_X86_PAE=y CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_NUMA=yCONFIG_NODES_SHIFT=3 CONFIG_HAVE_ARCH_BOOTMEM=y CONFIG_ARCH_HAVE_MEMORY_PRESENT=y CONFIG_NEED_NODE_MEMMAP_SIZE=y CONFIG_HAVE_ARCH_ALLOC_REMAP=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0 CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_MEMORY_FAILURE is not set CONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_EFI is not setCONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=250CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=yCONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set CONFIG_PHYSICAL_START=0x100000 CONFIG_RELOCATABLE=y CONFIG_X86_NEED_RELOCS=y CONFIG_PHYSICAL_ALIGN=0x100000 CONFIG_HOTPLUG_CPU=yCONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID is not set
#
# Power management and ACPI options
#CONFIG_PM=y
# CONFIG_PM_DEBUG is not setCONFIG_PM_SLEEP_SMP=yCONFIG_PM_SLEEP=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=yCONFIG_HIBERNATION_NVS=yCONFIG_HIBERNATION=yCONFIG_PM_STD_PARTITION=""
# CONFIG_PM_RUNTIME is not setCONFIG_ACPI=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_PROCFS=yCONFIG_ACPI_PROCFS_POWER=yCONFIG_ACPI_SYSFS_POWER=yCONFIG_ACPI_PROC_EVENT=yCONFIG_ACPI_AC=mCONFIG_ACPI_BATTERY=mCONFIG_ACPI_BUTTON=mCONFIG_ACPI_VIDEO=mCONFIG_ACPI_FAN=mCONFIG_ACPI_DOCK=yCONFIG_ACPI_PROCESSOR=mCONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not setCONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_NUMA is not setCONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not setCONFIG_ACPI_BLACKLIST_YEAR=2001CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not setCONFIG_ACPI_PCI_SLOT=mCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=mCONFIG_ACPI_SBS=m
# CONFIG_SFI is not setCONFIG_X86_APM_BOOT=yCONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not setCONFIG_APM_DO_ENABLE=y
# CONFIG_APM_CPU_IDLE is not setCONFIG_APM_DISPLAY_BLANK=yCONFIG_APM_ALLOW_INTS=y
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=m CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#CONFIG_X86_ACPI_CPUFREQ=mCONFIG_X86_POWERNOW_K6=mCONFIG_X86_POWERNOW_K7=mCONFIG_X86_POWERNOW_K7_ACPI=yCONFIG_X86_POWERNOW_K8=mCONFIG_X86_GX_SUSPMOD=mCONFIG_X86_SPEEDSTEP_CENTRINO=mCONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=yCONFIG_X86_SPEEDSTEP_ICH=mCONFIG_X86_SPEEDSTEP_SMI=mCONFIG_X86_P4_CLOCKMOD=mCONFIG_X86_CPUFREQ_NFORCE2=mCONFIG_X86_LONGRUN=mCONFIG_X86_LONGHAUL=mCONFIG_X86_E_POWERSAVER=m
#
# shared options # CONFIG_X86_SPEEDSTEP_LIB=m CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCI_OLPC=yCONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not setCONFIG_PCIEPORTBUS=yCONFIG_HOTPLUG_PCI_PCIE=mCONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not setCONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not setCONFIG_ARCH_SUPPORTS_MSI=yCONFIG_PCI_MSI=yCONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not setCONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not setCONFIG_ISA_DMA_API=yCONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_SCx200=m
CONFIG_SCx200HR_TIMER=mCONFIG_OLPC=yCONFIG_K8_NB=yCONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not setCONFIG_PCMCIA=mCONFIG_PCMCIA_LOAD_CIS=yCONFIG_PCMCIA_IOCTL=yCONFIG_CARDBUS=y
#
# PC-card bridges
#CONFIG_YENTA=mCONFIG_YENTA_O2=yCONFIG_YENTA_RICOH=yCONFIG_YENTA_TI=yCONFIG_YENTA_ENE_TUNE=yCONFIG_YENTA_TOSHIBA=yCONFIG_PD6729=mCONFIG_I82092=mCONFIG_I82365=mCONFIG_TCIC=mCONFIG_PCMCIA_PROBE=yCONFIG_PCCARD_NONSTATIC=mCONFIG_HOTPLUG_PCI=mCONFIG_HOTPLUG_PCI_FAKE=mCONFIG_HOTPLUG_PCI_COMPAQ=mCONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=yCONFIG_HOTPLUG_PCI_IBM=mCONFIG_HOTPLUG_PCI_ACPI=mCONFIG_HOTPLUG_PCI_ACPI_IBM=mCONFIG_HOTPLUG_PCI_CPCI=yCONFIG_HOTPLUG_PCI_CPCI_ZT5550=mCONFIG_HOTPLUG_PCI_CPCI_GENERIC=mCONFIG_HOTPLUG_PCI_SHPC=m
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not setCONFIG_HAVE_AOUT=yCONFIG_BINFMT_AOUT=mCONFIG_BINFMT_MISC=mCONFIG_HAVE_ATOMIC_IOMAP=yCONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=mCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=mCONFIG_XFRM_SUB_POLICY=yCONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not setCONFIG_XFRM_IPCOMP=mCONFIG_NET_KEY=mCONFIG_NET_KEY_MIGRATE=yCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not setCONFIG_IP_FIB_HASH=yCONFIG_IP_MULTIPLE_TABLES=yCONFIG_IP_ROUTE_MULTIPATH=yCONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not setCONFIG_NET_IPIP=mCONFIG_NET_IPGRE=mCONFIG_NET_IPGRE_BROADCAST=yCONFIG_IP_MROUTE=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not setCONFIG_SYN_COOKIES=yCONFIG_INET_AH=mCONFIG_INET_ESP=mCONFIG_INET_IPCOMP=mCONFIG_INET_XFRM_TUNNEL=mCONFIG_INET_TUNNEL=mCONFIG_INET_XFRM_MODE_TRANSPORT=mCONFIG_INET_XFRM_MODE_TUNNEL=mCONFIG_INET_XFRM_MODE_BEET=mCONFIG_INET_LRO=yCONFIG_INET_DIAG=mCONFIG_INET_TCP_DIAG=mCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=mCONFIG_TCP_CONG_CUBIC=yCONFIG_TCP_CONG_WESTWOOD=mCONFIG_TCP_CONG_HTCP=mCONFIG_TCP_CONG_HSTCP=mCONFIG_TCP_CONG_HYBLA=mCONFIG_TCP_CONG_VEGAS=mCONFIG_TCP_CONG_SCALABLE=mCONFIG_TCP_CONG_LP=mCONFIG_TCP_CONG_VENO=mCONFIG_TCP_CONG_YEAH=mCONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not setCONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not setCONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not setCONFIG_IPV6=mCONFIG_IPV6_PRIVACY=yCONFIG_IPV6_ROUTER_PREF=yCONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not setCONFIG_INET6_AH=mCONFIG_INET6_ESP=mCONFIG_INET6_IPCOMP=mCONFIG_IPV6_MIP6=mCONFIG_INET6_XFRM_TUNNEL=mCONFIG_INET6_TUNNEL=mCONFIG_INET6_XFRM_MODE_TRANSPORT=mCONFIG_INET6_XFRM_MODE_TUNNEL=mCONFIG_INET6_XFRM_MODE_BEET=mCONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=mCONFIG_IPV6_SIT=mCONFIG_IPV6_NDISC_NODETYPE=yCONFIG_IPV6_TUNNEL=mCONFIG_IPV6_MULTIPLE_TABLES=yCONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not setCONFIG_NETWORK_SECMARK=yCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not setCONFIG_NETFILTER_ADVANCED=yCONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=mCONFIG_NETFILTER_NETLINK_QUEUE=mCONFIG_NETFILTER_NETLINK_LOG=mCONFIG_NF_CONNTRACK=mCONFIG_NF_CT_ACCT=yCONFIG_NF_CONNTRACK_MARK=yCONFIG_NF_CONNTRACK_SECMARK=yCONFIG_NF_CONNTRACK_EVENTS=yCONFIG_NF_CT_PROTO_DCCP=mCONFIG_NF_CT_PROTO_GRE=mCONFIG_NF_CT_PROTO_SCTP=mCONFIG_NF_CT_PROTO_UDPLITE=mCONFIG_NF_CONNTRACK_AMANDA=mCONFIG_NF_CONNTRACK_FTP=mCONFIG_NF_CONNTRACK_H323=mCONFIG_NF_CONNTRACK_IRC=mCONFIG_NF_CONNTRACK_NETBIOS_NS=mCONFIG_NF_CONNTRACK_PPTP=mCONFIG_NF_CONNTRACK_SANE=mCONFIG_NF_CONNTRACK_SIP=mCONFIG_NF_CONNTRACK_TFTP=mCONFIG_NF_CT_NETLINK=m
# CONFIG_NETFILTER_TPROXY is not setCONFIG_NETFILTER_XTABLES=mCONFIG_NETFILTER_XT_TARGET_CLASSIFY=mCONFIG_NETFILTER_XT_TARGET_CONNMARK=mCONFIG_NETFILTER_XT_TARGET_CONNSECMARK=mCONFIG_NETFILTER_XT_TARGET_DSCP=mCONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_LED is not setCONFIG_NETFILTER_XT_TARGET_MARK=mCONFIG_NETFILTER_XT_TARGET_NFLOG=mCONFIG_NETFILTER_XT_TARGET_NFQUEUE=mCONFIG_NETFILTER_XT_TARGET_NOTRACK=mCONFIG_NETFILTER_XT_TARGET_RATEEST=mCONFIG_NETFILTER_XT_TARGET_TRACE=mCONFIG_NETFILTER_XT_TARGET_SECMARK=mCONFIG_NETFILTER_XT_TARGET_TCPMSS=mCONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not setCONFIG_NETFILTER_XT_MATCH_COMMENT=mCONFIG_NETFILTER_XT_MATCH_CONNBYTES=mCONFIG_NETFILTER_XT_MATCH_CONNLIMIT=mCONFIG_NETFILTER_XT_MATCH_CONNMARK=mCONFIG_NETFILTER_XT_MATCH_CONNTRACK=mCONFIG_NETFILTER_XT_MATCH_DCCP=mCONFIG_NETFILTER_XT_MATCH_DSCP=mCONFIG_NETFILTER_XT_MATCH_ESP=mCONFIG_NETFILTER_XT_MATCH_HASHLIMIT=mCONFIG_NETFILTER_XT_MATCH_HELPER=mCONFIG_NETFILTER_XT_MATCH_HL=mCONFIG_NETFILTER_XT_MATCH_IPRANGE=mCONFIG_NETFILTER_XT_MATCH_LENGTH=mCONFIG_NETFILTER_XT_MATCH_LIMIT=mCONFIG_NETFILTER_XT_MATCH_MAC=mCONFIG_NETFILTER_XT_MATCH_MARK=mCONFIG_NETFILTER_XT_MATCH_MULTIPORT=mCONFIG_NETFILTER_XT_MATCH_OWNER=mCONFIG_NETFILTER_XT_MATCH_POLICY=mCONFIG_NETFILTER_XT_MATCH_PHYSDEV=mCONFIG_NETFILTER_XT_MATCH_PKTTYPE=mCONFIG_NETFILTER_XT_MATCH_QUOTA=mCONFIG_NETFILTER_XT_MATCH_RATEEST=mCONFIG_NETFILTER_XT_MATCH_REALM=m
# CONFIG_NETFILTER_XT_MATCH_RECENT is not setCONFIG_NETFILTER_XT_MATCH_SCTP=mCONFIG_NETFILTER_XT_MATCH_STATE=mCONFIG_NETFILTER_XT_MATCH_STATISTIC=mCONFIG_NETFILTER_XT_MATCH_STRING=mCONFIG_NETFILTER_XT_MATCH_TCPMSS=mCONFIG_NETFILTER_XT_MATCH_TIME=mCONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_NETFILTER_XT_MATCH_OSF is not setCONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not setCONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#CONFIG_IP_VS_PROTO_TCP=yCONFIG_IP_VS_PROTO_UDP=yCONFIG_IP_VS_PROTO_AH_ESP=yCONFIG_IP_VS_PROTO_ESP=yCONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#CONFIG_IP_VS_RR=mCONFIG_IP_VS_WRR=mCONFIG_IP_VS_LC=mCONFIG_IP_VS_WLC=mCONFIG_IP_VS_LBLC=mCONFIG_IP_VS_LBLCR=mCONFIG_IP_VS_DH=mCONFIG_IP_VS_SH=mCONFIG_IP_VS_SED=mCONFIG_IP_VS_NQ=m
#
# IPVS application helper
#CONFIG_IP_VS_FTP=m
#
# IP: Netfilter Configuration
#CONFIG_NF_DEFRAG_IPV4=mCONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not setCONFIG_IP_NF_QUEUE=mCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_ADDRTYPE=mCONFIG_IP_NF_MATCH_AH=mCONFIG_IP_NF_MATCH_ECN=mCONFIG_IP_NF_MATCH_TTL=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_TARGET_LOG=mCONFIG_IP_NF_TARGET_ULOG=mCONFIG_NF_NAT=mCONFIG_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=mCONFIG_IP_NF_TARGET_NETMAP=mCONFIG_IP_NF_TARGET_REDIRECT=mCONFIG_NF_NAT_SNMP_BASIC=mCONFIG_NF_NAT_PROTO_DCCP=mCONFIG_NF_NAT_PROTO_GRE=mCONFIG_NF_NAT_PROTO_UDPLITE=mCONFIG_NF_NAT_PROTO_SCTP=mCONFIG_NF_NAT_FTP=mCONFIG_NF_NAT_IRC=mCONFIG_NF_NAT_TFTP=mCONFIG_NF_NAT_AMANDA=mCONFIG_NF_NAT_PPTP=mCONFIG_NF_NAT_H323=mCONFIG_NF_NAT_SIP=mCONFIG_IP_NF_MANGLE=mCONFIG_IP_NF_TARGET_CLUSTERIP=mCONFIG_IP_NF_TARGET_ECN=mCONFIG_IP_NF_TARGET_TTL=mCONFIG_IP_NF_RAW=mCONFIG_IP_NF_SECURITY=mCONFIG_IP_NF_ARPTABLES=mCONFIG_IP_NF_ARPFILTER=mCONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#CONFIG_NF_CONNTRACK_IPV6=mCONFIG_IP6_NF_QUEUE=mCONFIG_IP6_NF_IPTABLES=mCONFIG_IP6_NF_MATCH_AH=mCONFIG_IP6_NF_MATCH_EUI64=mCONFIG_IP6_NF_MATCH_FRAG=mCONFIG_IP6_NF_MATCH_OPTS=mCONFIG_IP6_NF_MATCH_HL=mCONFIG_IP6_NF_MATCH_IPV6HEADER=mCONFIG_IP6_NF_MATCH_MH=mCONFIG_IP6_NF_MATCH_RT=mCONFIG_IP6_NF_TARGET_HL=mCONFIG_IP6_NF_TARGET_LOG=mCONFIG_IP6_NF_FILTER=mCONFIG_IP6_NF_TARGET_REJECT=mCONFIG_IP6_NF_MANGLE=mCONFIG_IP6_NF_RAW=mCONFIG_IP6_NF_SECURITY=m
#
# DECnet: Netfilter Configuration
#CONFIG_DECNET_NF_GRABULATOR=mCONFIG_BRIDGE_NF_EBTABLES=mCONFIG_BRIDGE_EBT_BROUTE=mCONFIG_BRIDGE_EBT_T_FILTER=mCONFIG_BRIDGE_EBT_T_NAT=mCONFIG_BRIDGE_EBT_802_3=mCONFIG_BRIDGE_EBT_AMONG=mCONFIG_BRIDGE_EBT_ARP=mCONFIG_BRIDGE_EBT_IP=mCONFIG_BRIDGE_EBT_IP6=mCONFIG_BRIDGE_EBT_LIMIT=mCONFIG_BRIDGE_EBT_MARK=mCONFIG_BRIDGE_EBT_PKTTYPE=mCONFIG_BRIDGE_EBT_STP=mCONFIG_BRIDGE_EBT_VLAN=mCONFIG_BRIDGE_EBT_ARPREPLY=mCONFIG_BRIDGE_EBT_DNAT=mCONFIG_BRIDGE_EBT_MARK_T=mCONFIG_BRIDGE_EBT_REDIRECT=mCONFIG_BRIDGE_EBT_SNAT=mCONFIG_BRIDGE_EBT_LOG=mCONFIG_BRIDGE_EBT_ULOG=mCONFIG_BRIDGE_EBT_NFLOG=mCONFIG_IP_DCCP=mCONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not setCONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not setCONFIG_IP_DCCP_CCID3_RTO=100CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not setCONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not setCONFIG_SCTP_HMAC_MD5=y
# CONFIG_RDS is not set
# CONFIG_TIPC is not setCONFIG_ATM=mCONFIG_ATM_CLIP=mCONFIG_ATM_CLIP_NO_ICMP=yCONFIG_ATM_LANE=mCONFIG_ATM_MPOA=mCONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not setCONFIG_STP=mCONFIG_GARP=mCONFIG_BRIDGE=m
# CONFIG_NET_DSA is not setCONFIG_VLAN_8021Q=mCONFIG_VLAN_8021Q_GVRP=yCONFIG_DECNET=mCONFIG_DECNET_ROUTER=yCONFIG_LLC=yCONFIG_LLC2=mCONFIG_IPX=m
# CONFIG_IPX_INTERN is not setCONFIG_ATALK=mCONFIG_DEV_APPLETALK=mCONFIG_LTPC=mCONFIG_COPS=mCONFIG_COPS_DAYNA=yCONFIG_COPS_TANGENT=yCONFIG_IPDDP=mCONFIG_IPDDP_ENCAP=yCONFIG_IPDDP_DECAP=yCONFIG_X25=mCONFIG_LAPB=mCONFIG_ECONET=m
# CONFIG_ECONET_AUNUDP is not set
# CONFIG_ECONET_NATIVE is not setCONFIG_WAN_ROUTER=m
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not setCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=mCONFIG_NET_SCH_HTB=mCONFIG_NET_SCH_HFSC=mCONFIG_NET_SCH_ATM=mCONFIG_NET_SCH_PRIO=mCONFIG_NET_SCH_MULTIQ=mCONFIG_NET_SCH_RED=mCONFIG_NET_SCH_SFQ=mCONFIG_NET_SCH_TEQL=mCONFIG_NET_SCH_TBF=mCONFIG_NET_SCH_GRED=mCONFIG_NET_SCH_DSMARK=mCONFIG_NET_SCH_NETEM=m
# CONFIG_NET_SCH_DRR is not setCONFIG_NET_SCH_INGRESS=m
#
# Classification
#CONFIG_NET_CLS=yCONFIG_NET_CLS_BASIC=mCONFIG_NET_CLS_TCINDEX=mCONFIG_NET_CLS_ROUTE4=mCONFIG_NET_CLS_ROUTE=yCONFIG_NET_CLS_FW=mCONFIG_NET_CLS_U32=mCONFIG_CLS_U32_PERF=yCONFIG_CLS_U32_MARK=yCONFIG_NET_CLS_RSVP=mCONFIG_NET_CLS_RSVP6=mCONFIG_NET_CLS_FLOW=m
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_EMATCH is not setCONFIG_NET_CLS_ACT=yCONFIG_NET_ACT_POLICE=mCONFIG_NET_ACT_GACT=mCONFIG_GACT_PROB=yCONFIG_NET_ACT_MIRRED=mCONFIG_NET_ACT_IPT=mCONFIG_NET_ACT_NAT=mCONFIG_NET_ACT_PEDIT=mCONFIG_NET_ACT_SIMP=mCONFIG_NET_ACT_SKBEDIT=m
# CONFIG_NET_CLS_IND is not setCONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
#
# Network testing
#CONFIG_NET_PKTGEN=mCONFIG_NET_TCPPROBE=m
# CONFIG_NET_DROP_MONITOR is not setCONFIG_HAMRADIO=y
#
# Packet Radio protocols
#CONFIG_AX25=mCONFIG_AX25_DAMA_SLAVE=yCONFIG_NETROM=mCONFIG_ROSE=m
#
# AX.25 network device drivers
#CONFIG_MKISS=mCONFIG_6PACK=mCONFIG_BPQETHER=mCONFIG_SCC=mCONFIG_SCC_DELAY=yCONFIG_SCC_TRXECHO=yCONFIG_BAYCOM_SER_FDX=mCONFIG_BAYCOM_SER_HDX=mCONFIG_BAYCOM_PAR=mCONFIG_BAYCOM_EPP=mCONFIG_YAM=mCONFIG_CAN=mCONFIG_CAN_RAW=mCONFIG_CAN_BCM=m
#
# CAN Device Drivers
#CONFIG_CAN_VCAN=m
# CONFIG_CAN_DEV is not set
# CONFIG_CAN_DEBUG_DEVICES is not setCONFIG_IRDA=m
#
# IrDA protocols
#CONFIG_IRLAN=mCONFIG_IRNET=mCONFIG_IRCOMM=mCONFIG_IRDA_ULTRA=y
#
# IrDA options
#CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#CONFIG_IRTTY_SIR=m
#
# Dongle support
#CONFIG_DONGLE=yCONFIG_ESI_DONGLE=mCONFIG_ACTISYS_DONGLE=mCONFIG_TEKRAM_DONGLE=mCONFIG_TOIM3232_DONGLE=mCONFIG_LITELINK_DONGLE=mCONFIG_MA600_DONGLE=mCONFIG_GIRBIL_DONGLE=mCONFIG_MCP2120_DONGLE=mCONFIG_OLD_BELKIN_DONGLE=mCONFIG_ACT200L_DONGLE=mCONFIG_KINGSUN_DONGLE=mCONFIG_KSDAZZLE_DONGLE=mCONFIG_KS959_DONGLE=m
#
# FIR device drivers
#CONFIG_USB_IRDA=mCONFIG_SIGMATEL_FIR=mCONFIG_NSC_FIR=mCONFIG_WINBOND_FIR=mCONFIG_TOSHIBA_FIR=mCONFIG_SMC_IRCC_FIR=mCONFIG_ALI_FIR=mCONFIG_VLSI_FIR=mCONFIG_VIA_FIR=mCONFIG_MCS_FIR=mCONFIG_BT=mCONFIG_BT_L2CAP=mCONFIG_BT_SCO=mCONFIG_BT_RFCOMM=mCONFIG_BT_RFCOMM_TTY=yCONFIG_BT_BNEP=mCONFIG_BT_BNEP_MC_FILTER=yCONFIG_BT_BNEP_PROTO_FILTER=yCONFIG_BT_CMTP=mCONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#CONFIG_BT_HCIBTUSB=mCONFIG_BT_HCIBTSDIO=mCONFIG_BT_HCIUART=mCONFIG_BT_HCIUART_H4=yCONFIG_BT_HCIUART_BCSP=yCONFIG_BT_HCIUART_LL=yCONFIG_BT_HCIBCM203X=mCONFIG_BT_HCIBPA10X=mCONFIG_BT_HCIBFUSB=mCONFIG_BT_HCIDTL1=mCONFIG_BT_HCIBT3C=mCONFIG_BT_HCIBLUECARD=mCONFIG_BT_HCIBTUART=mCONFIG_BT_HCIVHCI=m
# CONFIG_BT_MRVL is not setCONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not setCONFIG_RXKAD=mCONFIG_FIB_RULES=yCONFIG_WIRELESS=yCONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not setCONFIG_CFG80211_DEFAULT_PS=yCONFIG_CFG80211_DEFAULT_PS_VALUE=1
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not setCONFIG_WIRELESS_EXT=yCONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not setCONFIG_MAC80211=mCONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not setCONFIG_MAC80211_RC_DEFAULT_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT="minstrel"CONFIG_MAC80211_MESH=yCONFIG_MAC80211_LEDS=yCONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not setCONFIG_RFKILL=mCONFIG_RFKILL_LEDS=yCONFIG_RFKILL_INPUT=yCONFIG_NET_9P=mCONFIG_NET_9P_VIRTIO=m
# CONFIG_NET_9P_RDMA is not set
# CONFIG_NET_9P_DEBUG is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not setCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not setCONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=yCONFIG_MTD=m
# CONFIG_MTD_DEBUG is not setCONFIG_MTD_CONCAT=mCONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not setCONFIG_MTD_REDBOOT_PARTS=mCONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not setCONFIG_MTD_AR7_PARTS=m
#
# User Modules And Translation Layers
#CONFIG_MTD_CHAR=mCONFIG_HAVE_MTD_OTP=yCONFIG_MTD_BLKDEVS=mCONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not setCONFIG_RFD_FTL=m
# CONFIG_SSFDC is not setCONFIG_MTD_OOPS=m
#
# RAM/ROM/Flash chip drivers
#CONFIG_MTD_CFI=mCONFIG_MTD_JEDECPROBE=mCONFIG_MTD_GEN_PROBE=mCONFIG_MTD_CFI_ADV_OPTIONS=yCONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not setCONFIG_MTD_MAP_BANK_WIDTH_1=yCONFIG_MTD_MAP_BANK_WIDTH_2=yCONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not setCONFIG_MTD_CFI_I1=yCONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not setCONFIG_MTD_CFI_INTELEXT=mCONFIG_MTD_CFI_AMDSTD=mCONFIG_MTD_CFI_STAA=mCONFIG_MTD_CFI_UTIL=m
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not setCONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#CONFIG_MTD_COMPLEX_MAPPINGS=yCONFIG_MTD_PHYSMAP=m
# CONFIG_MTD_PHYSMAP_COMPAT is not setCONFIG_MTD_SC520CDP=mCONFIG_MTD_NETSC520=mCONFIG_MTD_TS5500=mCONFIG_MTD_SBC_GXX=m
CONFIG_MTD_SCx200_DOCFLASH=mCONFIG_MTD_AMD76XROM=mCONFIG_MTD_ICHXROM=mCONFIG_MTD_ESB2ROM=mCONFIG_MTD_CK804XROM=mCONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=mCONFIG_MTD_L440GX=mCONFIG_MTD_PCI=mCONFIG_MTD_INTEL_VR_NOR=m
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#CONFIG_MTD_PMC551=mCONFIG_MTD_PMC551_BUGFIX=y
# CONFIG_MTD_PMC551_DEBUG is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not setCONFIG_MTD_SLRAM=mCONFIG_MTD_PHRAM=mCONFIG_MTD_MTDRAM=mCONFIG_MTDRAM_TOTAL_SIZE=4096CONFIG_MTDRAM_ERASE_SIZE=128CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#CONFIG_MTD_DOC2000=mCONFIG_MTD_DOC2001=mCONFIG_MTD_DOC2001PLUS=m CONFIG_MTD_DOCPROBE=mCONFIG_MTD_DOCECC=m CONFIG_MTD_DOCPROBE_ADVANCED=y CONFIG_MTD_DOCPROBE_ADDRESS=0x0000 CONFIG_MTD_DOCPROBE_HIGH=y CONFIG_MTD_DOCPROBE_55AA=yCONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set CONFIG_MTD_NAND_ECC_SMC=y
# CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=m CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y CONFIG_MTD_NAND_CAFE=m CONFIG_MTD_NAND_CS553X=m CONFIG_MTD_NAND_NANDSIM=m CONFIG_MTD_NAND_PLATFORM=m CONFIG_MTD_ALAUDA=mCONFIG_MTD_ONENAND=m
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set CONFIG_MTD_ONENAND_OTP=y CONFIG_MTD_ONENAND_2X_PROGRAM=y CONFIG_MTD_ONENAND_SIM=m
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
#
# UBI - Unsorted block images
#CONFIG_MTD_UBI=mCONFIG_MTD_UBI_WL_THRESHOLD=4096CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set
#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not setCONFIG_PARPORT=mCONFIG_PARPORT_PC=mCONFIG_PARPORT_SERIAL=mCONFIG_PARPORT_PC_FIFO=yCONFIG_PARPORT_PC_SUPERIO=yCONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not setCONFIG_PARPORT_AX88796=mCONFIG_PARPORT_1284=yCONFIG_PARPORT_NOT_PC=yCONFIG_PNP=yCONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#CONFIG_ISAPNP=yCONFIG_PNPBIOS=yCONFIG_PNPBIOS_PROC_FS=yCONFIG_PNPACPI=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=mCONFIG_BLK_DEV_XD=mCONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#CONFIG_PARIDE_PD=mCONFIG_PARIDE_PCD=mCONFIG_PARIDE_PF=mCONFIG_PARIDE_PT=mCONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#CONFIG_PARIDE_ATEN=mCONFIG_PARIDE_BPCK=mCONFIG_PARIDE_BPCK6=mCONFIG_PARIDE_COMM=mCONFIG_PARIDE_DSTR=mCONFIG_PARIDE_FIT2=mCONFIG_PARIDE_FIT3=mCONFIG_PARIDE_EPAT=mCONFIG_PARIDE_EPATC8=yCONFIG_PARIDE_EPIA=mCONFIG_PARIDE_FRIQ=mCONFIG_PARIDE_FRPW=mCONFIG_PARIDE_KBIC=mCONFIG_PARIDE_KTTI=mCONFIG_PARIDE_ON20=mCONFIG_PARIDE_ON26=mCONFIG_BLK_CPQ_DA=mCONFIG_BLK_CPQ_CISS_DA=mCONFIG_CISS_SCSI_TAPE=yCONFIG_BLK_DEV_DAC960=mCONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=mCONFIG_BLK_DEV_CRYPTOLOOP=mCONFIG_BLK_DEV_DRBD=mCONFIG_DRBD_TRACE=m
# CONFIG_DRBD_FAULT_INJECTION is not setCONFIG_BLK_DEV_NBD=mCONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not setCONFIG_BLK_DEV_RAM=mCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=64000CONFIG_BLK_DEV_XIP=yCONFIG_CDROM_PKTCDVD=mCONFIG_CDROM_PKTCDVD_BUFFERS=8CONFIG_CDROM_PKTCDVD_WCACHE=yCONFIG_ATA_OVER_ETH=mCONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not setCONFIG_MISC_DEVICES=yCONFIG_IBM_ASM=mCONFIG_HWLAT_DETECTOR=mCONFIG_PHANTOM=m
# CONFIG_SGI_IOC4 is not setCONFIG_TIFM_CORE=mCONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not setCONFIG_ENCLOSURE_SERVICES=mCONFIG_HP_ILO=m
# CONFIG_DELL_LAPTOP is not set
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not setCONFIG_EEPROM_93CX6=m
# CONFIG_CB710_CORE is not setCONFIG_HAVE_IDE=yCONFIG_IDE=m
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives #CONFIG_IDE_XFER_MODE=yCONFIG_IDE_TIMINGS=yCONFIG_IDE_ATAPI=yCONFIG_IDE_LEGACY=y
# CONFIG_BLK_DEV_IDE_SATA is not setCONFIG_IDE_GD=mCONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not setCONFIG_BLK_DEV_IDECS=mCONFIG_BLK_DEV_DELKIN=mCONFIG_BLK_DEV_IDECD=m CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y CONFIG_BLK_DEV_IDETAPE=mCONFIG_BLK_DEV_IDEACPI=y
# CONFIG_IDE_TASK_IOCTL is not setCONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#CONFIG_IDE_GENERIC=mCONFIG_BLK_DEV_PLATFORM=mCONFIG_BLK_DEV_CMD640=mCONFIG_BLK_DEV_CMD640_ENHANCED=yCONFIG_BLK_DEV_IDEPNP=mCONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#CONFIG_BLK_DEV_IDEPCI=yCONFIG_BLK_DEV_OFFBOARD=yCONFIG_BLK_DEV_GENERIC=mCONFIG_BLK_DEV_OPTI621=mCONFIG_BLK_DEV_RZ1000=mCONFIG_BLK_DEV_IDEDMA_PCI=yCONFIG_BLK_DEV_AEC62XX=mCONFIG_BLK_DEV_ALI15X3=mCONFIG_BLK_DEV_AMD74XX=mCONFIG_BLK_DEV_ATIIXP=mCONFIG_BLK_DEV_CMD64X=mCONFIG_BLK_DEV_TRIFLEX=mCONFIG_BLK_DEV_CS5520=mCONFIG_BLK_DEV_CS5530=mCONFIG_BLK_DEV_CS5535=m
# CONFIG_BLK_DEV_CS5536 is not setCONFIG_BLK_DEV_HPT366=mCONFIG_BLK_DEV_JMICRON=mCONFIG_BLK_DEV_SC1200=mCONFIG_BLK_DEV_PIIX=m
# CONFIG_BLK_DEV_IT8172 is not setCONFIG_BLK_DEV_IT8213=mCONFIG_BLK_DEV_IT821X=mCONFIG_BLK_DEV_NS87415=mCONFIG_BLK_DEV_PDC202XX_OLD=mCONFIG_BLK_DEV_PDC202XX_NEW=mCONFIG_BLK_DEV_SVWKS=mCONFIG_BLK_DEV_SIIMAGE=mCONFIG_BLK_DEV_SIS5513=mCONFIG_BLK_DEV_SLC90E66=mCONFIG_BLK_DEV_TRM290=mCONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_BLK_DEV_TC86C001 is not set
#
# Other IDE chipsets support
#
#
# Note: most of these also require special kernel boot parameters #CONFIG_BLK_DEV_4DRIVES=mCONFIG_BLK_DEV_ALI14XX=mCONFIG_BLK_DEV_DTC2278=mCONFIG_BLK_DEV_HT6560B=mCONFIG_BLK_DEV_QD65XX=mCONFIG_BLK_DEV_UMC8672=mCONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#CONFIG_RAID_ATTRS=mCONFIG_SCSI=mCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=mCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=mCONFIG_CHR_DEV_ST=mCONFIG_CHR_DEV_OSST=mCONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not setCONFIG_CHR_DEV_SG=mCONFIG_CHR_DEV_SCH=mCONFIG_SCSI_ENCLOSURE=mCONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not setCONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=mCONFIG_SCSI_FC_ATTRS=mCONFIG_SCSI_FC_TGT_ATTRS=yCONFIG_SCSI_ISCSI_ATTRS=mCONFIG_SCSI_SAS_ATTRS=mCONFIG_SCSI_SAS_LIBSAS=mCONFIG_SCSI_SAS_ATA=yCONFIG_SCSI_SAS_HOST_SMP=yCONFIG_SCSI_SAS_LIBSAS_DEBUG=yCONFIG_SCSI_SRP_ATTRS=mCONFIG_SCSI_SRP_TGT_ATTRS=yCONFIG_SCSI_LOWLEVEL=yCONFIG_ISCSI_TCP=mCONFIG_SCSI_CXGB3_ISCSI=m
# CONFIG_SCSI_BNX2_ISCSI is not setCONFIG_BLK_DEV_3W_XXXX_RAID=mCONFIG_SCSI_3W_9XXX=mCONFIG_SCSI_7000FASST=mCONFIG_SCSI_ACARD=mCONFIG_SCSI_AHA152X=mCONFIG_SCSI_AHA1542=mCONFIG_SCSI_AACRAID=mCONFIG_SCSI_AIC7XXX=mCONFIG_AIC7XXX_CMDS_PER_DEVICE=32CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not setCONFIG_AIC7XXX_DEBUG_MASK=0CONFIG_AIC7XXX_REG_PRETTY_PRINT=yCONFIG_SCSI_AIC7XXX_OLD=mCONFIG_SCSI_AIC79XX=mCONFIG_AIC79XX_CMDS_PER_DEVICE=32CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not setCONFIG_AIC79XX_DEBUG_MASK=0CONFIG_AIC79XX_REG_PRETTY_PRINT=yCONFIG_SCSI_AIC94XX=mCONFIG_AIC94XX_DEBUG=yCONFIG_SCSI_MVSAS=mCONFIG_SCSI_MVSAS_DEBUG=yCONFIG_SCSI_DPT_I2O=mCONFIG_SCSI_ADVANSYS=mCONFIG_SCSI_IN2000=mCONFIG_SCSI_ARCMSR=mCONFIG_SCSI_ARCMSR_AER=yCONFIG_MEGARAID_NEWGEN=yCONFIG_MEGARAID_MM=mCONFIG_MEGARAID_MAILBOX=mCONFIG_MEGARAID_LEGACY=mCONFIG_MEGARAID_SAS=m
# CONFIG_SCSI_MPT2SAS is not setCONFIG_SCSI_HPTIOP=mCONFIG_SCSI_BUSLOGIC=mCONFIG_SCSI_FLASHPOINT=yCONFIG_LIBFC=mCONFIG_LIBFCOE=mCONFIG_FCOE=m
# CONFIG_FCOE_FNIC is not setCONFIG_SCSI_DMX3191D=mCONFIG_SCSI_DTC3280=mCONFIG_SCSI_EATA=mCONFIG_SCSI_EATA_TAGGED_QUEUE=yCONFIG_SCSI_EATA_LINKED_COMMANDS=yCONFIG_SCSI_EATA_MAX_TAGS=16CONFIG_SCSI_FUTURE_DOMAIN=mCONFIG_SCSI_GDTH=mCONFIG_SCSI_GENERIC_NCR5380=mCONFIG_SCSI_GENERIC_NCR5380_MMIO=mCONFIG_SCSI_GENERIC_NCR53C400=yCONFIG_SCSI_IPS=mCONFIG_SCSI_INITIO=mCONFIG_SCSI_INIA100=mCONFIG_SCSI_PPA=mCONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not setCONFIG_SCSI_NCR53C406A=mCONFIG_SCSI_STEX=mCONFIG_SCSI_SYM53C8XX_2=mCONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64CONFIG_SCSI_SYM53C8XX_MMIO=yCONFIG_SCSI_IPR=mCONFIG_SCSI_IPR_TRACE=yCONFIG_SCSI_IPR_DUMP=yCONFIG_SCSI_PAS16=mCONFIG_SCSI_QLOGIC_FAS=mCONFIG_SCSI_QLOGIC_1280=mCONFIG_SCSI_QLA_FC=mCONFIG_SCSI_QLA_ISCSI=mCONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not setCONFIG_SCSI_SYM53C416=m
CONFIG_SCSI_DC395x=mCONFIG_SCSI_DC390T=mCONFIG_SCSI_T128=mCONFIG_SCSI_U14_34F=mCONFIG_SCSI_U14_34F_TAGGED_QUEUE=yCONFIG_SCSI_U14_34F_LINKED_COMMANDS=yCONFIG_SCSI_U14_34F_MAX_TAGS=8CONFIG_SCSI_ULTRASTOR=mCONFIG_SCSI_NSP32=mCONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_PMCRAID is not setCONFIG_SCSI_SRP=mCONFIG_SCSI_LOWLEVEL_PCMCIA=yCONFIG_PCMCIA_AHA152X=mCONFIG_PCMCIA_FDOMAIN=mCONFIG_PCMCIA_NINJA_SCSI=mCONFIG_PCMCIA_QLOGIC=mCONFIG_PCMCIA_SYM53C500=mCONFIG_SCSI_DH=mCONFIG_SCSI_DH_RDAC=mCONFIG_SCSI_DH_HP_SW=mCONFIG_SCSI_DH_EMC=mCONFIG_SCSI_DH_ALUA=m
# CONFIG_SCSI_OSD_INITIATOR is not setCONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not setCONFIG_ATA_VERBOSE_ERROR=yCONFIG_ATA_ACPI=yCONFIG_SATA_PMP=yCONFIG_SATA_AHCI=mCONFIG_SATA_SIL24=mCONFIG_ATA_SFF=yCONFIG_SATA_SVW=mCONFIG_ATA_PIIX=mCONFIG_SATA_MV=mCONFIG_SATA_NV=mCONFIG_PDC_ADMA=mCONFIG_SATA_QSTOR=mCONFIG_SATA_PROMISE=mCONFIG_SATA_SX4=mCONFIG_SATA_SIL=mCONFIG_SATA_SIS=mCONFIG_SATA_ULI=mCONFIG_SATA_VIA=mCONFIG_SATA_VITESSE=mCONFIG_SATA_INIC162X=mCONFIG_PATA_ACPI=mCONFIG_PATA_ALI=mCONFIG_PATA_AMD=mCONFIG_PATA_ARTOP=mCONFIG_PATA_ATIIXP=mCONFIG_PATA_CMD640_PCI=mCONFIG_PATA_CMD64X=mCONFIG_PATA_CS5520=mCONFIG_PATA_CS5530=mCONFIG_PATA_CS5535=mCONFIG_PATA_CS5536=mCONFIG_PATA_CYPRESS=mCONFIG_PATA_EFAR=mCONFIG_ATA_GENERIC=mCONFIG_PATA_HPT366=mCONFIG_PATA_HPT37X=mCONFIG_PATA_HPT3X2N=mCONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not setCONFIG_PATA_ISAPNP=mCONFIG_PATA_IT821X=mCONFIG_PATA_IT8213=mCONFIG_PATA_JMICRON=mCONFIG_PATA_LEGACY=mCONFIG_PATA_TRIFLEX=mCONFIG_PATA_MARVELL=mCONFIG_PATA_MPIIX=mCONFIG_PATA_OLDPIIX=mCONFIG_PATA_NETCELL=mCONFIG_PATA_NINJA32=mCONFIG_PATA_NS87410=mCONFIG_PATA_NS87415=mCONFIG_PATA_OPTI=mCONFIG_PATA_OPTIDMA=mCONFIG_PATA_PCMCIA=mCONFIG_PATA_PDC_OLD=mCONFIG_PATA_QDI=mCONFIG_PATA_RADISYS=m
# CONFIG_PATA_RDC is not setCONFIG_PATA_RZ1000=mCONFIG_PATA_SC1200=mCONFIG_PATA_SERVERWORKS=mCONFIG_PATA_PDC2027X=mCONFIG_PATA_SIL680=mCONFIG_PATA_SIS=mCONFIG_PATA_VIA=mCONFIG_PATA_WINBOND=mCONFIG_PATA_WINBOND_VLB=mCONFIG_PATA_SCH=mCONFIG_MD=yCONFIG_BLK_DEV_MD=yCONFIG_MD_AUTODETECT=yCONFIG_MD_LINEAR=mCONFIG_MD_RAID0=mCONFIG_MD_RAID1=mCONFIG_MD_RAID10=mCONFIG_MD_RAID456=mCONFIG_MD_RAID6_PQ=mCONFIG_MD_MULTIPATH=mCONFIG_MD_FAULTY=mCONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not setCONFIG_DM_CRYPT=mCONFIG_DM_SNAPSHOT=mCONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not setCONFIG_DM_ZERO=mCONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not setCONFIG_DM_DELAY=mCONFIG_DM_UEVENT=yCONFIG_FUSION=yCONFIG_FUSION_SPI=mCONFIG_FUSION_FC=mCONFIG_FUSION_SAS=mCONFIG_FUSION_MAX_SGE=128CONFIG_FUSION_CTL=mCONFIG_FUSION_LAN=m
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks. #
#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not setCONFIG_IEEE1394=mCONFIG_IEEE1394_OHCI1394=mCONFIG_IEEE1394_PCILYNX=mCONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not setCONFIG_IEEE1394_ETH1394_ROM_ENTRY=yCONFIG_IEEE1394_ETH1394=mCONFIG_IEEE1394_RAWIO=mCONFIG_IEEE1394_VIDEO1394=mCONFIG_IEEE1394_DV1394=m
# CONFIG_IEEE1394_VERBOSEDEBUG is not setCONFIG_I2O=mCONFIG_I2O_LCT_NOTIFY_ON_CHANGES=yCONFIG_I2O_EXT_ADAPTEC=yCONFIG_I2O_EXT_ADAPTEC_DMA64=yCONFIG_I2O_CONFIG=mCONFIG_I2O_CONFIG_OLD_IOCTL=yCONFIG_I2O_BUS=mCONFIG_I2O_BLOCK=mCONFIG_I2O_SCSI=mCONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not setCONFIG_NETDEVICES=yCONFIG_IFB=mCONFIG_DUMMY=mCONFIG_BONDING=mCONFIG_MACVLAN=mCONFIG_EQUALIZER=mCONFIG_TUN=mCONFIG_VETH=mCONFIG_NET_SB1000=mCONFIG_ARCNET=mCONFIG_ARCNET_1201=mCONFIG_ARCNET_1051=mCONFIG_ARCNET_RAW=mCONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=mCONFIG_ARCNET_RIM_I=m
# CONFIG_ARCNET_COM20020 is not setCONFIG_PHYLIB=m
#
# MII PHY device drivers
#CONFIG_MARVELL_PHY=mCONFIG_DAVICOM_PHY=mCONFIG_QSEMI_PHY=mCONFIG_LXT_PHY=mCONFIG_CICADA_PHY=mCONFIG_VITESSE_PHY=mCONFIG_SMSC_PHY=mCONFIG_BROADCOM_PHY=mCONFIG_ICPLUS_PHY=mCONFIG_REALTEK_PHY=m
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_GPIO is not set CONFIG_NET_ETHERNET=yCONFIG_MII=mCONFIG_HAPPYMEAL=mCONFIG_SUNGEM=mCONFIG_CASSINI=mCONFIG_NET_VENDOR_3COM=yCONFIG_EL1=mCONFIG_EL2=mCONFIG_ELPLUS=mCONFIG_EL16=mCONFIG_EL3=mCONFIG_3C515=mCONFIG_VORTEX=mCONFIG_TYPHOON=mCONFIG_LANCE=mCONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=mCONFIG_ULTRA=mCONFIG_SMC9194=mCONFIG_ENC28J60=m
# CONFIG_ENC28J60_WRITEVERIFY is not set
# CONFIG_ETHOC is not set CONFIG_NET_VENDOR_RACAL=yCONFIG_NI52=mCONFIG_NI65=m
# CONFIG_DNET is not set CONFIG_NET_TULIP=yCONFIG_DE2104X=mCONFIG_DE2104X_DSL=0CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set CONFIG_TULIP_NAPI=y CONFIG_TULIP_NAPI_HW_MITIGATION=y CONFIG_DE4X5=mCONFIG_WINBOND_840=mCONFIG_DM9102=mCONFIG_ULI526X=mCONFIG_PCMCIA_XIRCOM=mCONFIG_AT1700=mCONFIG_DEPCA=mCONFIG_HP100=mCONFIG_NET_ISA=yCONFIG_E2100=mCONFIG_EWRK3=mCONFIG_EEXPRESS=mCONFIG_EEXPRESS_PRO=mCONFIG_HPLAN_PLUS=mCONFIG_HPLAN=mCONFIG_LP486E=mCONFIG_ETH16I=mCONFIG_NE2000=mCONFIG_ZNET=mCONFIG_SEEQ8005=m
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=yCONFIG_PCNET32=mCONFIG_AMD8111_ETH=m CONFIG_ADAPTEC_STARFIRE=mCONFIG_AC3200=mCONFIG_APRICOT=mCONFIG_B44=mCONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=yCONFIG_FORCEDETH=mCONFIG_FORCEDETH_NAPI=y
CONFIG_CS89x0=mCONFIG_E100=mCONFIG_FEALNX=mCONFIG_NATSEMI=mCONFIG_NE2K_PCI=mCONFIG_8139CP=mCONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set CONFIG_R6040=mCONFIG_SIS900=mCONFIG_EPIC100=m
# CONFIG_SMSC9420 is not set CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set CONFIG_TLAN=m
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set CONFIG_SC92031=mCONFIG_NET_POCKET=yCONFIG_ATP=mCONFIG_DE600=mCONFIG_DE620=mCONFIG_ATL2=mCONFIG_NETDEV_1000=yCONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set CONFIG_DL2K=mCONFIG_E1000=mCONFIG_E1000E=mCONFIG_IP1000=mCONFIG_IGB=m
# CONFIG_IGBVF is not setCONFIG_NS83820=mCONFIG_HAMACHI=mCONFIG_YELLOWFIN=mCONFIG_R8169=mCONFIG_R8169_VLAN=yCONFIG_SIS190=mCONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set CONFIG_VIA_VELOCITY=mCONFIG_TIGON3=mCONFIG_BNX2=m
# CONFIG_CNIC is not setCONFIG_QLA3XXX=mCONFIG_ATL1=mCONFIG_ATL1E=m
# CONFIG_ATL1C is not set
# CONFIG_JME is not set CONFIG_NETDEV_10000=yCONFIG_MDIO=mCONFIG_CHELSIO_T1=mCONFIG_CHELSIO_T1_1G=y CONFIG_CHELSIO_T3_DEPENDS=y CONFIG_CHELSIO_T3=m
# CONFIG_ENIC is not setCONFIG_IXGBE=mCONFIG_IXGB=mCONFIG_S2IO=m
# CONFIG_VXGE is not setCONFIG_MYRI10GE=mCONFIG_NETXEN_NIC=mCONFIG_NIU=m
# CONFIG_MLX4_EN is not set CONFIG_MLX4_CORE=mCONFIG_MLX4_DEBUG=yCONFIG_TEHUTI=mCONFIG_BNX2X=m
# CONFIG_QLGE is not setCONFIG_SFC=mCONFIG_SFC_MTD=y
# CONFIG_BE2NET is not setCONFIG_TR=yCONFIG_IBMTR=mCONFIG_IBMOL=mCONFIG_IBMLS=mCONFIG_3C359=mCONFIG_TMS380TR=mCONFIG_TMSPCI=mCONFIG_SKISA=mCONFIG_PROTEON=mCONFIG_ABYSS=mCONFIG_SMCTR=m
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers #
#
# USB Network Adapters
#CONFIG_USB_CATC=mCONFIG_USB_KAWETH=mCONFIG_USB_PEGASUS=mCONFIG_USB_RTL8150=mCONFIG_USB_USBNET=mCONFIG_USB_NET_AX8817X=mCONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_CDC_EEM is not setCONFIG_USB_NET_DM9601=m
# CONFIG_USB_NET_SMSC95XX is not setCONFIG_USB_NET_GL620A=mCONFIG_USB_NET_NET1080=mCONFIG_USB_NET_PLUSB=mCONFIG_USB_NET_MCS7830=mCONFIG_USB_NET_RNDIS_HOST=mCONFIG_USB_NET_CDC_SUBSET=mCONFIG_USB_ALI_M5632=yCONFIG_USB_AN2720=yCONFIG_USB_BELKIN=yCONFIG_USB_ARMLINUX=yCONFIG_USB_EPSON2888=yCONFIG_USB_KC2190=yCONFIG_USB_NET_ZAURUS=mCONFIG_USB_HSO=m
# CONFIG_USB_NET_INT51X1 is not setCONFIG_NET_PCMCIA=yCONFIG_PCMCIA_3C589=mCONFIG_PCMCIA_3C574=mCONFIG_PCMCIA_FMVJ18X=mCONFIG_PCMCIA_PCNET=mCONFIG_PCMCIA_NMCLAN=mCONFIG_PCMCIA_SMC91C92=mCONFIG_PCMCIA_XIRC2PS=mCONFIG_PCMCIA_AXNET=mCONFIG_PCMCIA_IBMTR=mCONFIG_WAN=yCONFIG_HOSTESS_SV11=m
# CONFIG_COSA is not setCONFIG_LANMEDIA=mCONFIG_SEALEVEL_4021=mCONFIG_HDLC=mCONFIG_HDLC_RAW=mCONFIG_HDLC_RAW_ETH=mCONFIG_HDLC_CISCO=mCONFIG_HDLC_FR=mCONFIG_HDLC_PPP=mCONFIG_HDLC_X25=mCONFIG_PCI200SYN=mCONFIG_WANXL=mCONFIG_PC300TOO=mCONFIG_N2=mCONFIG_C101=mCONFIG_FARSYNC=m
# CONFIG_DSCC4 is not setCONFIG_DLCI=mCONFIG_DLCI_MAX=8CONFIG_SDLA=m
# CONFIG_WAN_ROUTER_DRIVERS is not setCONFIG_LAPBETHER=mCONFIG_X25_ASY=m
# CONFIG_SBNI is not setCONFIG_ATM_DRIVERS=yCONFIG_ATM_DUMMY=mCONFIG_ATM_TCP=mCONFIG_ATM_LANAI=mCONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not setCONFIG_ATM_FIRESTREAM=mCONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not setCONFIG_ATM_NICSTAR=mCONFIG_ATM_NICSTAR_USE_SUNI=yCONFIG_ATM_NICSTAR_USE_IDT77105=yCONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not setCONFIG_ATM_IDT77252_RCV_ALL=yCONFIG_ATM_IDT77252_USE_SUNI=yCONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not setCONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not setCONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not setCONFIG_ATM_FORE200E=mCONFIG_ATM_FORE200E_USE_TASKLET=yCONFIG_ATM_FORE200E_TX_RETRY=16CONFIG_ATM_FORE200E_DEBUG=0CONFIG_ATM_HE=mCONFIG_ATM_HE_USE_SUNI=y
# CONFIG_ATM_SOLOS is not setCONFIG_FDDI=y
# CONFIG_DEFXX is not setCONFIG_SKFP=mCONFIG_HIPPI=yCONFIG_ROADRUNNER=mCONFIG_ROADRUNNER_LARGE_RINGS=yCONFIG_PLIP=mCONFIG_PPP=mCONFIG_PPP_MULTILINK=yCONFIG_PPP_FILTER=yCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=mCONFIG_PPP_DEFLATE=mCONFIG_PPP_BSDCOMP=mCONFIG_PPP_MPPE=mCONFIG_PPPOE=mCONFIG_PPPOATM=mCONFIG_PPPOL2TP=mCONFIG_SLIP=mCONFIG_SLIP_COMPRESSED=yCONFIG_SLHC=mCONFIG_SLIP_SMART=yCONFIG_SLIP_MODE_SLIP6=yCONFIG_NET_FC=yCONFIG_NETCONSOLE=mCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=yCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=yCONFIG_VIRTIO_NET=mCONFIG_ISDN=yCONFIG_ISDN_I4L=mCONFIG_MISDN=mCONFIG_MISDN_DSP=mCONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#CONFIG_MISDN_HFCPCI=mCONFIG_MISDN_HFCMULTI=m
# CONFIG_MISDN_HFCUSB is not set
# CONFIG_MISDN_AVMFRITZ is not set
# CONFIG_MISDN_SPEEDFAX is not set
# CONFIG_MISDN_INFINEON is not set
# CONFIG_MISDN_W6692 is not set
# CONFIG_MISDN_NETJET is not setCONFIG_ISDN_PPP=yCONFIG_ISDN_PPP_VJ=yCONFIG_ISDN_MPP=yCONFIG_IPPP_FILTER=yCONFIG_ISDN_PPP_BSDCOMP=mCONFIG_ISDN_AUDIO=yCONFIG_ISDN_TTY_FAX=yCONFIG_ISDN_X25=y
#
# ISDN feature submodules
#CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#CONFIG_HISAX_EURO=yCONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not setCONFIG_HISAX_1TR6=yCONFIG_HISAX_NI1=yCONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#CONFIG_HISAX_16_0=yCONFIG_HISAX_16_3=yCONFIG_HISAX_TELESPCI=yCONFIG_HISAX_S0BOX=yCONFIG_HISAX_AVM_A1=yCONFIG_HISAX_FRITZPCI=yCONFIG_HISAX_AVM_A1_PCMCIA=yCONFIG_HISAX_ELSA=yCONFIG_HISAX_IX1MICROR2=yCONFIG_HISAX_DIEHLDIVA=yCONFIG_HISAX_ASUSCOM=yCONFIG_HISAX_TELEINT=yCONFIG_HISAX_HFCS=yCONFIG_HISAX_SEDLBAUER=yCONFIG_HISAX_SPORTSTER=yCONFIG_HISAX_MIC=yCONFIG_HISAX_NETJET=yCONFIG_HISAX_NETJET_U=yCONFIG_HISAX_NICCY=yCONFIG_HISAX_ISURF=yCONFIG_HISAX_HSTSAPHIR=yCONFIG_HISAX_BKM_A4T=yCONFIG_HISAX_SCT_QUADRO=yCONFIG_HISAX_GAZEL=yCONFIG_HISAX_HFC_PCI=yCONFIG_HISAX_W6692=yCONFIG_HISAX_HFC_SX=yCONFIG_HISAX_ENTERNOW_PCI=yCONFIG_HISAX_DEBUG=y
#
# HiSax PCMCIA card service modules
#CONFIG_HISAX_SEDLBAUER_CS=mCONFIG_HISAX_ELSA_CS=mCONFIG_HISAX_AVM_A1_CS=mCONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#CONFIG_HISAX_ST5481=mCONFIG_HISAX_HFCUSB=mCONFIG_HISAX_HFC4S8S=mCONFIG_HISAX_FRITZ_PCIPNP=m
#
# Active cards
#CONFIG_ISDN_DRV_ICN=mCONFIG_ISDN_DRV_PCBIT=mCONFIG_ISDN_DRV_SC=mCONFIG_ISDN_DRV_ACT2000=mCONFIG_HYSDN=mCONFIG_HYSDN_CAPI=yCONFIG_ISDN_HDLC=mCONFIG_ISDN_CAPI=mCONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=yCONFIG_CAPI_TRACE=yCONFIG_ISDN_CAPI_MIDDLEWARE=yCONFIG_ISDN_CAPI_CAPI20=mCONFIG_ISDN_CAPI_CAPIFS_BOOL=yCONFIG_ISDN_CAPI_CAPIFS=mCONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#CONFIG_CAPI_AVM=yCONFIG_ISDN_DRV_AVMB1_B1ISA=mCONFIG_ISDN_DRV_AVMB1_B1PCI=mCONFIG_ISDN_DRV_AVMB1_B1PCIV4=yCONFIG_ISDN_DRV_AVMB1_T1ISA=mCONFIG_ISDN_DRV_AVMB1_B1PCMCIA=mCONFIG_ISDN_DRV_AVMB1_AVM_CS=mCONFIG_ISDN_DRV_AVMB1_T1PCI=mCONFIG_ISDN_DRV_AVMB1_C4=mCONFIG_CAPI_EICON=yCONFIG_ISDN_DIVAS=mCONFIG_ISDN_DIVAS_BRIPCI=yCONFIG_ISDN_DIVAS_PRIPCI=yCONFIG_ISDN_DIVAS_DIVACAPI=mCONFIG_ISDN_DIVAS_USERIDI=mCONFIG_ISDN_DIVAS_MAINT=mCONFIG_ISDN_DRV_GIGASET=mCONFIG_GIGASET_BASE=mCONFIG_GIGASET_M105=mCONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not setCONFIG_PHONE=mCONFIG_PHONE_IXJ=mCONFIG_PHONE_IXJ_PCMCIA=m
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=mCONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=mCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not setCONFIG_KEYBOARD_GPIO=m
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not setCONFIG_KEYBOARD_NEWTON=m
# CONFIG_KEYBOARD_STOWAWAY is not setCONFIG_KEYBOARD_SUNKBD=mCONFIG_KEYBOARD_XTKBD=mCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=yCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_PS2_OLPC is not setCONFIG_MOUSE_SERIAL=mCONFIG_MOUSE_APPLETOUCH=mCONFIG_MOUSE_BCM5974=mCONFIG_MOUSE_INPORT=mCONFIG_MOUSE_ATIXL=yCONFIG_MOUSE_LOGIBM=mCONFIG_MOUSE_PC110PAD=m
# CONFIG_MOUSE_VSXXXAA is not setCONFIG_MOUSE_GPIO=m
# CONFIG_MOUSE_SYNAPTICS_I2C is not setCONFIG_INPUT_JOYSTICK=yCONFIG_JOYSTICK_ANALOG=mCONFIG_JOYSTICK_A3D=mCONFIG_JOYSTICK_ADI=mCONFIG_JOYSTICK_COBRA=mCONFIG_JOYSTICK_GF2K=mCONFIG_JOYSTICK_GRIP=mCONFIG_JOYSTICK_GRIP_MP=mCONFIG_JOYSTICK_GUILLEMOT=mCONFIG_JOYSTICK_INTERACT=mCONFIG_JOYSTICK_SIDEWINDER=mCONFIG_JOYSTICK_TMDC=mCONFIG_JOYSTICK_IFORCE=mCONFIG_JOYSTICK_IFORCE_USB=yCONFIG_JOYSTICK_IFORCE_232=yCONFIG_JOYSTICK_WARRIOR=mCONFIG_JOYSTICK_MAGELLAN=mCONFIG_JOYSTICK_SPACEORB=mCONFIG_JOYSTICK_SPACEBALL=mCONFIG_JOYSTICK_STINGER=mCONFIG_JOYSTICK_TWIDJOY=mCONFIG_JOYSTICK_ZHENHUA=mCONFIG_JOYSTICK_DB9=mCONFIG_JOYSTICK_GAMECON=mCONFIG_JOYSTICK_TURBOGRAFX=mCONFIG_JOYSTICK_JOYDUMP=mCONFIG_JOYSTICK_XPAD=mCONFIG_JOYSTICK_XPAD_FF=yCONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_JOYSTICK_WALKERA0701 is not setCONFIG_INPUT_TABLET=yCONFIG_TABLET_USB_ACECAD=mCONFIG_TABLET_USB_AIPTEK=mCONFIG_TABLET_USB_GTCO=mCONFIG_TABLET_USB_KBTAB=mCONFIG_TABLET_USB_WACOM=mCONFIG_INPUT_TOUCHSCREEN=yCONFIG_TOUCHSCREEN_ADS7846=m
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_EETI is not setCONFIG_TOUCHSCREEN_FUJITSU=mCONFIG_TOUCHSCREEN_GUNZE=mCONFIG_TOUCHSCREEN_ELO=m
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not setCONFIG_TOUCHSCREEN_MTOUCH=mCONFIG_TOUCHSCREEN_INEXIO=mCONFIG_TOUCHSCREEN_MK712=mCONFIG_TOUCHSCREEN_HTCPEN=mCONFIG_TOUCHSCREEN_PENMOUNT=mCONFIG_TOUCHSCREEN_TOUCHRIGHT=mCONFIG_TOUCHSCREEN_TOUCHWIN=mCONFIG_TOUCHSCREEN_WM97XX=mCONFIG_TOUCHSCREEN_WM9705=yCONFIG_TOUCHSCREEN_WM9712=yCONFIG_TOUCHSCREEN_WM9713=yCONFIG_TOUCHSCREEN_USB_COMPOSITE=mCONFIG_TOUCHSCREEN_USB_EGALAX=yCONFIG_TOUCHSCREEN_USB_PANJIT=yCONFIG_TOUCHSCREEN_USB_3M=yCONFIG_TOUCHSCREEN_USB_ITM=yCONFIG_TOUCHSCREEN_USB_ETURBO=yCONFIG_TOUCHSCREEN_USB_GUNZE=yCONFIG_TOUCHSCREEN_USB_DMC_TSC10=yCONFIG_TOUCHSCREEN_USB_IRTOUCH=yCONFIG_TOUCHSCREEN_USB_IDEALTEK=yCONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=yCONFIG_TOUCHSCREEN_USB_GOTOP=yCONFIG_TOUCHSCREEN_USB_JASTEC=yCONFIG_TOUCHSCREEN_USB_E2I=yCONFIG_TOUCHSCREEN_TOUCHIT213=m
# CONFIG_TOUCHSCREEN_TSC2007 is not setCONFIG_INPUT_MISC=yCONFIG_INPUT_PCSPKR=mCONFIG_INPUT_APANEL=mCONFIG_INPUT_WISTRON_BTNS=mCONFIG_INPUT_ATLAS_BTNS=mCONFIG_INPUT_ATI_REMOTE=mCONFIG_INPUT_ATI_REMOTE2=mCONFIG_INPUT_KEYSPAN_REMOTE=mCONFIG_INPUT_POWERMATE=mCONFIG_INPUT_YEALINK=m
# CONFIG_INPUT_CM109 is not setCONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=mCONFIG_SERIO_CT82C710=mCONFIG_SERIO_PARKBD=mCONFIG_SERIO_PCIPS2=mCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=mCONFIG_GAMEPORT=mCONFIG_GAMEPORT_NS558=mCONFIG_GAMEPORT_L4=mCONFIG_GAMEPORT_EMU10K1=mCONFIG_GAMEPORT_FM801=m
#
# Character devices
#CONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_DEVKMEM=yCONFIG_SERIAL_NONSTANDARD=yCONFIG_COMPUTONE=mCONFIG_ROCKETPORT=mCONFIG_CYCLADES=mCONFIG_CYZ_INTR=yCONFIG_DIGIEPCA=mCONFIG_MOXA_INTELLIO=mCONFIG_MOXA_SMARTIO=mCONFIG_ISI=mCONFIG_SYNCLINK=mCONFIG_SYNCLINKMP=mCONFIG_SYNCLINK_GT=mCONFIG_N_HDLC=mCONFIG_RISCOM8=mCONFIG_SPECIALIX=mCONFIG_SX=mCONFIG_RIO=mCONFIG_RIO_OLDPCI=yCONFIG_STALDRV=y
# CONFIG_STALLION is not set
# CONFIG_ISTALLION is not setCONFIG_NOZOMI=m
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_PNP=yCONFIG_SERIAL_8250_CS=mCONFIG_SERIAL_8250_NR_UARTS=16CONFIG_SERIAL_8250_RUNTIME_UARTS=8CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=yCONFIG_SERIAL_8250_FOURPORT=mCONFIG_SERIAL_8250_ACCENT=mCONFIG_SERIAL_8250_BOCA=mCONFIG_SERIAL_8250_EXAR_ST16C554=mCONFIG_SERIAL_8250_HUB6=mCONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not setCONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not setCONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_JSM=mCONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not setCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=0CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not setCONFIG_PPDEV=mCONFIG_HVC_DRIVER=yCONFIG_VIRTIO_CONSOLE=mCONFIG_IPMI_HANDLER=mCONFIG_IPMI_PANIC_EVENT=yCONFIG_IPMI_PANIC_STRING=yCONFIG_IPMI_DEVICE_INTERFACE=mCONFIG_IPMI_SI=mCONFIG_IPMI_WATCHDOG=mCONFIG_IPMI_POWEROFF=mCONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not setCONFIG_HW_RANDOM_INTEL=mCONFIG_HW_RANDOM_AMD=mCONFIG_HW_RANDOM_GEODE=mCONFIG_HW_RANDOM_VIA=mCONFIG_HW_RANDOM_VIRTIO=mCONFIG_NVRAM=mCONFIG_DTLK=mCONFIG_R3964=mCONFIG_APPLICOM=mCONFIG_SONYPI=m
#
# PCMCIA character devices
#CONFIG_SYNCLINK_CS=mCONFIG_CARDMAN_4000=mCONFIG_CARDMAN_4040=mCONFIG_IPWIRELESS=mCONFIG_MWAVE=m
CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=mCONFIG_NSC_GPIO=mCONFIG_CS5535_GPIO=mCONFIG_RAW_DRIVER=mCONFIG_MAX_RAW_DEVS=4096CONFIG_HPET=yCONFIG_HPET_MMAP=yCONFIG_HANGCHECK_TIMER=mCONFIG_TCG_TPM=mCONFIG_TCG_TIS=mCONFIG_TCG_NSC=mCONFIG_TCG_ATMEL=mCONFIG_TCG_INFINEON=mCONFIG_TELCLOCK=mCONFIG_DEVPORT=y
# CONFIG_UMMUNOTIFY is not setCONFIG_I2C=mCONFIG_I2C_BOARDINFO=yCONFIG_I2C_COMPAT=yCONFIG_I2C_CHARDEV=mCONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_ALGOBIT=mCONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#CONFIG_I2C_ALI1535=mCONFIG_I2C_ALI1563=mCONFIG_I2C_ALI15X3=mCONFIG_I2C_AMD756=mCONFIG_I2C_AMD756_S4882=mCONFIG_I2C_AMD8111=mCONFIG_I2C_I801=mCONFIG_I2C_ISCH=mCONFIG_I2C_PIIX4=mCONFIG_I2C_NFORCE2=mCONFIG_I2C_NFORCE2_S4985=mCONFIG_I2C_SIS5595=mCONFIG_I2C_SIS630=mCONFIG_I2C_SIS96X=mCONFIG_I2C_VIA=mCONFIG_I2C_VIAPRO=m
#
# I2C system bus drivers (mostly embedded / system-on-chip) #CONFIG_I2C_GPIO=mCONFIG_I2C_OCORES=m
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#CONFIG_I2C_PARPORT=mCONFIG_I2C_PARPORT_LIGHT=mCONFIG_I2C_TAOS_EVM=mCONFIG_I2C_TINY_USB=m
#
# Graphics adapter I2C/DDC channel drivers
#CONFIG_I2C_VOODOO3=m
#
# Other I2C/SMBus bus drivers
#CONFIG_I2C_PCA_ISA=mCONFIG_I2C_PCA_PLATFORM=mCONFIG_I2C_STUB=m
CONFIG_SCx200_I2C=m
CONFIG_SCx200_I2C_SCL=12
CONFIG_SCx200_I2C_SDA=13
CONFIG_SCx200_ACB=m
#
# Miscellaneous I2C Chip support
#CONFIG_DS1682=mCONFIG_SENSORS_TSL2550=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not setCONFIG_SPI=yCONFIG_SPI_DEBUG=yCONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#CONFIG_SPI_BITBANG=mCONFIG_SPI_BUTTERFLY=m
# CONFIG_SPI_GPIO is not setCONFIG_SPI_LM70_LLP=m
#
# SPI Protocol Masters
#CONFIG_SPI_SPIDEV=mCONFIG_SPI_TLE62X0=m
#
# PPS support
#
# CONFIG_PPS is not setCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=yCONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not setCONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO expanders:
#
#
# I2C GPIO expanders:
#CONFIG_GPIO_MAX732X=mCONFIG_GPIO_PCA953X=mCONFIG_GPIO_PCF857X=m
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
#
# SPI GPIO expanders:
#CONFIG_GPIO_MAX7301=mCONFIG_GPIO_MCP23S08=mCONFIG_W1=mCONFIG_W1_CON=y
#
# 1-wire Bus Masters
#CONFIG_W1_MASTER_MATROX=mCONFIG_W1_MASTER_DS2490=mCONFIG_W1_MASTER_DS2482=mCONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
#CONFIG_W1_SLAVE_THERM=mCONFIG_W1_SLAVE_SMEM=m
# CONFIG_W1_SLAVE_DS2431 is not setCONFIG_W1_SLAVE_DS2433=mCONFIG_W1_SLAVE_DS2433_CRC=yCONFIG_W1_SLAVE_DS2760=m
# CONFIG_W1_SLAVE_BQ27000 is not setCONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not setCONFIG_PDA_POWER=mCONFIG_BATTERY_DS2760=m
# CONFIG_BATTERY_DS2782 is not setCONFIG_BATTERY_OLPC=m
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not setCONFIG_HWMON=mCONFIG_HWMON_VID=mCONFIG_SENSORS_ABITUGURU=mCONFIG_SENSORS_ABITUGURU3=mCONFIG_SENSORS_AD7414=mCONFIG_SENSORS_AD7418=mCONFIG_SENSORS_ADCXX=mCONFIG_SENSORS_ADM1021=mCONFIG_SENSORS_ADM1025=mCONFIG_SENSORS_ADM1026=mCONFIG_SENSORS_ADM1029=mCONFIG_SENSORS_ADM1031=mCONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7462 is not setCONFIG_SENSORS_ADT7470=mCONFIG_SENSORS_ADT7473=m
# CONFIG_SENSORS_ADT7475 is not setCONFIG_SENSORS_K8TEMP=mCONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ATK0110 is not setCONFIG_SENSORS_ATXP1=mCONFIG_SENSORS_DS1621=mCONFIG_SENSORS_I5K_AMB=mCONFIG_SENSORS_F71805F=mCONFIG_SENSORS_F71882FG=mCONFIG_SENSORS_F75375S=mCONFIG_SENSORS_FSCHER=mCONFIG_SENSORS_FSCPOS=mCONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_G760A is not setCONFIG_SENSORS_GL518SM=mCONFIG_SENSORS_GL520SM=mCONFIG_SENSORS_CORETEMP=mCONFIG_SENSORS_IBMAEM=mCONFIG_SENSORS_IBMPEX=mCONFIG_SENSORS_IT87=mCONFIG_SENSORS_LM63=mCONFIG_SENSORS_LM70=mCONFIG_SENSORS_LM75=mCONFIG_SENSORS_LM77=mCONFIG_SENSORS_LM78=mCONFIG_SENSORS_LM80=mCONFIG_SENSORS_LM83=mCONFIG_SENSORS_LM85=mCONFIG_SENSORS_LM87=mCONFIG_SENSORS_LM90=mCONFIG_SENSORS_LM92=mCONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not setCONFIG_SENSORS_MAX1619=mCONFIG_SENSORS_MAX6650=mCONFIG_SENSORS_PC87360=mCONFIG_SENSORS_PC87427=mCONFIG_SENSORS_PCF8591=m
# CONFIG_SENSORS_SHT15 is not setCONFIG_SENSORS_SIS5595=mCONFIG_SENSORS_DME1737=mCONFIG_SENSORS_SMSC47M1=mCONFIG_SENSORS_SMSC47M192=mCONFIG_SENSORS_SMSC47B397=mCONFIG_SENSORS_ADS7828=mCONFIG_SENSORS_THMC50=m
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not setCONFIG_SENSORS_VIA686A=mCONFIG_SENSORS_VT1211=mCONFIG_SENSORS_VT8231=mCONFIG_SENSORS_W83781D=mCONFIG_SENSORS_W83791D=mCONFIG_SENSORS_W83792D=mCONFIG_SENSORS_W83793=mCONFIG_SENSORS_W83L785TS=mCONFIG_SENSORS_W83L786NG=mCONFIG_SENSORS_W83627HF=mCONFIG_SENSORS_W83627EHF=mCONFIG_SENSORS_HDAPS=m
# CONFIG_SENSORS_LIS3LV02D is not setCONFIG_SENSORS_APPLESMC=m
# CONFIG_HWMON_DEBUG_CHIP is not setCONFIG_THERMAL=mCONFIG_THERMAL_HWMON=yCONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=mCONFIG_ACQUIRE_WDT=mCONFIG_ADVANTECH_WDT=mCONFIG_ALIM1535_WDT=mCONFIG_ALIM7101_WDT=mCONFIG_SC520_WDT=m
# CONFIG_SBC_FITPC2_WATCHDOG is not setCONFIG_EUROTECH_WDT=mCONFIG_IB700_WDT=mCONFIG_IBMASR=mCONFIG_WAFER_WDT=mCONFIG_I6300ESB_WDT=mCONFIG_ITCO_WDT=mCONFIG_ITCO_VENDOR_SUPPORT=yCONFIG_IT8712F_WDT=m
# CONFIG_IT87_WDT is not setCONFIG_HP_WATCHDOG=mCONFIG_SC1200_WDT=m
CONFIG_SCx200_WDT=mCONFIG_PC87413_WDT=mCONFIG_60XX_WDT=mCONFIG_SBC8360_WDT=mCONFIG_SBC7240_WDT=mCONFIG_CPU5_WDT=m
# CONFIG_SMSC_SCH311X_WDT is not setCONFIG_SMSC37B787_WDT=mCONFIG_W83627HF_WDT=mCONFIG_W83697HF_WDT=m
# CONFIG_W83697UG_WDT is not setCONFIG_W83877F_WDT=mCONFIG_W83977F_WDT=mCONFIG_MACHZ_WDT=mCONFIG_SBC_EPX_C3_WATCHDOG=m
#
# ISA-based Watchdog Cards
#CONFIG_PCWATCHDOG=mCONFIG_MIXCOMWD=mCONFIG_WDT=m
#
# PCI-based Watchdog Cards
#CONFIG_PCIPCWATCHDOG=mCONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#CONFIG_USBPCWATCHDOG=mCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#CONFIG_SSB=mCONFIG_SSB_SPROM=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not setCONFIG_SSB_PCMCIAHOST_POSSIBLE=yCONFIG_SSB_PCMCIAHOST=y
# CONFIG_SSB_DEBUG is not setCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#CONFIG_MFD_CORE=mCONFIG_MFD_SM501=mCONFIG_MFD_SM501_GPIO=yCONFIG_HTC_PASIC3=m
# CONFIG_UCB1400_CORE is not set
# CONFIG_TPS65010 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#CONFIG_AGP=mCONFIG_AGP_ALI=mCONFIG_AGP_ATI=mCONFIG_AGP_AMD=mCONFIG_AGP_AMD64=mCONFIG_AGP_INTEL=mCONFIG_AGP_NVIDIA=mCONFIG_AGP_SIS=mCONFIG_AGP_SWORKS=mCONFIG_AGP_VIA=mCONFIG_AGP_EFFICEON=mCONFIG_VGA_ARB=yCONFIG_DRM=mCONFIG_DRM_TDFX=mCONFIG_DRM_R128=mCONFIG_DRM_RADEON=mCONFIG_DRM_I810=mCONFIG_DRM_I830=mCONFIG_DRM_I915=m
# CONFIG_DRM_I915_KMS is not setCONFIG_DRM_MGA=mCONFIG_DRM_SIS=mCONFIG_DRM_VIA=mCONFIG_DRM_SAVAGE=mCONFIG_VGASTATE=mCONFIG_VIDEO_OUTPUT_CONTROL=mCONFIG_FB=yCONFIG_FIRMWARE_EDID=yCONFIG_FB_DDC=mCONFIG_FB_BOOT_VESA_SUPPORT=yCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not setCONFIG_FB_SYS_FILLRECT=mCONFIG_FB_SYS_COPYAREA=mCONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not setCONFIG_FB_SYS_FOPS=mCONFIG_FB_DEFERRED_IO=yCONFIG_FB_HECUBA=mCONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not setCONFIG_FB_BACKLIGHT=yCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#CONFIG_FB_CIRRUS=mCONFIG_FB_PM2=mCONFIG_FB_PM2_FIFO_DISCONNECT=yCONFIG_FB_CYBER2000=mCONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not setCONFIG_FB_IMSTT=yCONFIG_FB_VGA16=mCONFIG_FB_UVESA=mCONFIG_FB_VESA=yCONFIG_FB_N411=mCONFIG_FB_HGA=mCONFIG_FB_HGA_ACCEL=yCONFIG_FB_S1D13XXX=mCONFIG_FB_NVIDIA=mCONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not setCONFIG_FB_NVIDIA_BACKLIGHT=yCONFIG_FB_RIVA=mCONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not setCONFIG_FB_RIVA_BACKLIGHT=yCONFIG_FB_I810=mCONFIG_FB_I810_GTF=yCONFIG_FB_I810_I2C=yCONFIG_FB_LE80578=mCONFIG_FB_CARILLO_RANCH=mCONFIG_FB_MATROX=mCONFIG_FB_MATROX_MILLENIUM=yCONFIG_FB_MATROX_MYSTIQUE=yCONFIG_FB_MATROX_G=y
# CONFIG_FB_MATROX_I2C is not setCONFIG_FB_MATROX_MULTIHEAD=yCONFIG_FB_RADEON=mCONFIG_FB_RADEON_I2C=yCONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not setCONFIG_FB_ATY=mCONFIG_FB_ATY_CT=yCONFIG_FB_ATY_GENERIC_LCD=yCONFIG_FB_ATY_GX=yCONFIG_FB_ATY_BACKLIGHT=yCONFIG_FB_S3=mCONFIG_FB_SAVAGE=mCONFIG_FB_SAVAGE_I2C=yCONFIG_FB_SAVAGE_ACCEL=yCONFIG_FB_SIS=mCONFIG_FB_SIS_300=yCONFIG_FB_SIS_315=y
# CONFIG_FB_VIA is not setCONFIG_FB_NEOMAGIC=mCONFIG_FB_KYRO=mCONFIG_FB_3DFX=mCONFIG_FB_3DFX_ACCEL=yCONFIG_FB_3DFX_I2C=yCONFIG_FB_VOODOO1=mCONFIG_FB_VT8623=mCONFIG_FB_TRIDENT=mCONFIG_FB_ARK=mCONFIG_FB_PM3=mCONFIG_FB_CARMINE=mCONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not setCONFIG_FB_GEODE=yCONFIG_FB_GEODE_LX=mCONFIG_FB_GEODE_GX=mCONFIG_FB_GEODE_GX1=m
# CONFIG_FB_TMIO is not setCONFIG_FB_SM501=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not setCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_LCD_CLASS_DEVICE=mCONFIG_LCD_LTV350QV=mCONFIG_LCD_ILI9320=m
# CONFIG_LCD_TDO24M is not setCONFIG_LCD_VGG2432A4=mCONFIG_LCD_PLATFORM=mCONFIG_BACKLIGHT_CLASS_DEVICE=yCONFIG_BACKLIGHT_GENERIC=yCONFIG_BACKLIGHT_PROGEAR=mCONFIG_BACKLIGHT_CARILLO_RANCH=mCONFIG_BACKLIGHT_MBP_NVIDIA=m
# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
#CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_MDA_CONSOLE=mCONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not setCONFIG_SOUND=mCONFIG_SOUND_OSS_CORE=y CONFIG_SOUND_OSS_CORE_PRECLAIM=yCONFIG_SND=mCONFIG_SND_TIMER=mCONFIG_SND_PCM=mCONFIG_SND_HWDEP=mCONFIG_SND_RAWMIDI=mCONFIG_SND_SEQUENCER=mCONFIG_SND_SEQ_DUMMY=mCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=mCONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_HRTIMER is not set CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y CONFIG_SND_VERBOSE_PRINTK=y CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
# CONFIG_SND_PCM_XRUN_DEBUG is not set CONFIG_SND_VMASTER=yCONFIG_SND_DMA_SGBUF=y CONFIG_SND_RAWMIDI_SEQ=m CONFIG_SND_OPL3_LIB_SEQ=m CONFIG_SND_OPL4_LIB_SEQ=m CONFIG_SND_SBAWE_SEQ=m CONFIG_SND_EMU10K1_SEQ=m CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=mCONFIG_SND_OPL4_LIB=mCONFIG_SND_VX_LIB=mCONFIG_SND_AC97_CODEC=mCONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set CONFIG_SND_DUMMY=mCONFIG_SND_VIRMIDI=mCONFIG_SND_MTPAV=mCONFIG_SND_MTS64=mCONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=mCONFIG_SND_PORTMAN2X4=m CONFIG_SND_AC97_POWER_SAVE=y CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 CONFIG_SND_WSS_LIB=mCONFIG_SND_SB_COMMON=mCONFIG_SND_SB8_DSP=mCONFIG_SND_SB16_DSP=mCONFIG_SND_ISA=yCONFIG_SND_ADLIB=mCONFIG_SND_AD1816A=mCONFIG_SND_AD1848=mCONFIG_SND_ALS100=mCONFIG_SND_AZT2320=mCONFIG_SND_CMI8330=mCONFIG_SND_CS4231=mCONFIG_SND_CS4236=mCONFIG_SND_DT019X=mCONFIG_SND_ES968=mCONFIG_SND_ES1688=mCONFIG_SND_ES18XX=mCONFIG_SND_SC6000=mCONFIG_SND_GUSCLASSIC=m CONFIG_SND_GUSEXTREME=mCONFIG_SND_GUSMAX=mCONFIG_SND_INTERWAVE=m CONFIG_SND_INTERWAVE_STB=m CONFIG_SND_OPL3SA2=m CONFIG_SND_OPTI92X_AD1848=m CONFIG_SND_OPTI92X_CS4231=m CONFIG_SND_OPTI93X=mCONFIG_SND_MIRO=mCONFIG_SND_SB8=mCONFIG_SND_SB16=mCONFIG_SND_SBAWE=mCONFIG_SND_SB16_CSP=yCONFIG_SND_SGALAXY=mCONFIG_SND_SSCAPE=mCONFIG_SND_WAVEFRONT=m
# CONFIG_SND_MSND_PINNACLE is not set
# CONFIG_SND_MSND_CLASSIC is not set CONFIG_SND_PCI=yCONFIG_SND_AD1889=mCONFIG_SND_ALS300=mCONFIG_SND_ALS4000=mCONFIG_SND_ALI5451=mCONFIG_SND_ATIIXP=mCONFIG_SND_ATIIXP_MODEM=mCONFIG_SND_AU8810=mCONFIG_SND_AU8820=mCONFIG_SND_AU8830=mCONFIG_SND_AW2=mCONFIG_SND_AZT3328=mCONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set CONFIG_SND_CA0106=mCONFIG_SND_CMIPCI=mCONFIG_SND_OXYGEN_LIB=mCONFIG_SND_OXYGEN=mCONFIG_SND_CS4281=mCONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y CONFIG_SND_CS5530=mCONFIG_SND_CS5535AUDIO=m
# CONFIG_SND_CTXFI is not set CONFIG_SND_DARLA20=mCONFIG_SND_GINA20=mCONFIG_SND_LAYLA20=mCONFIG_SND_DARLA24=mCONFIG_SND_GINA24=mCONFIG_SND_LAYLA24=mCONFIG_SND_MONA=mCONFIG_SND_MIA=mCONFIG_SND_ECHO3G=mCONFIG_SND_INDIGO=mCONFIG_SND_INDIGOIO=mCONFIG_SND_INDIGODJ=m
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set CONFIG_SND_EMU10K1=mCONFIG_SND_EMU10K1X=mCONFIG_SND_ENS1370=mCONFIG_SND_ENS1371=mCONFIG_SND_ES1938=mCONFIG_SND_ES1968=mCONFIG_SND_FM801=mCONFIG_SND_HDA_INTEL=mCONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set CONFIG_SND_HDA_INPUT_BEEP=y
# CONFIG_SND_HDA_INPUT_JACK is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set CONFIG_SND_HDA_CODEC_REALTEK=y CONFIG_SND_HDA_CODEC_ANALOG=y CONFIG_SND_HDA_CODEC_SIGMATEL=y CONFIG_SND_HDA_CODEC_VIA=y CONFIG_SND_HDA_CODEC_ATIHDMI=y CONFIG_SND_HDA_CODEC_NVHDMI=y CONFIG_SND_HDA_CODEC_INTELHDMI=y CONFIG_SND_HDA_ELD=y CONFIG_SND_HDA_CODEC_CIRRUS=y CONFIG_SND_HDA_CODEC_CONEXANT=y CONFIG_SND_HDA_CODEC_CA0110=y CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y CONFIG_SND_HDA_POWER_SAVE=y CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 CONFIG_SND_HDSP=mCONFIG_SND_HDSPM=mCONFIG_SND_HIFIER=mCONFIG_SND_ICE1712=mCONFIG_SND_ICE1724=mCONFIG_SND_INTEL8X0=mCONFIG_SND_INTEL8X0M=mCONFIG_SND_KORG1212=m
# CONFIG_SND_LX6464ES is not set CONFIG_SND_MAESTRO3=mCONFIG_SND_MIXART=mCONFIG_SND_NM256=mCONFIG_SND_PCXHR=mCONFIG_SND_RIPTIDE=mCONFIG_SND_RME32=mCONFIG_SND_RME96=mCONFIG_SND_RME9652=mCONFIG_SND_SIS7019=mCONFIG_SND_SONICVIBES=mCONFIG_SND_TRIDENT=mCONFIG_SND_VIA82XX=m CONFIG_SND_VIA82XX_MODEM=m CONFIG_SND_VIRTUOSO=mCONFIG_SND_VX222=mCONFIG_SND_YMFPCI=mCONFIG_SND_SPI=yCONFIG_SND_USB=yCONFIG_SND_USB_AUDIO=mCONFIG_SND_USB_USX2Y=mCONFIG_SND_USB_CAIAQ=m CONFIG_SND_USB_CAIAQ_INPUT=y
# CONFIG_SND_USB_US122L is not set CONFIG_SND_PCMCIA=yCONFIG_SND_VXPOCKET=mCONFIG_SND_PDAUDIOCF=m
# CONFIG_SND_SOC is not set CONFIG_SOUND_PRIME=m
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set CONFIG_SOUND_OSS=mCONFIG_SOUND_TRACEINIT=yCONFIG_SOUND_DMAP=yCONFIG_SOUND_SSCAPE=mCONFIG_SOUND_VMIDI=mCONFIG_SOUND_TRIX=mCONFIG_SOUND_MSS=mCONFIG_SOUND_MPU401=mCONFIG_SOUND_PAS=mCONFIG_SOUND_PSS=mCONFIG_PSS_MIXER=y
# CONFIG_PSS_HAVE_BOOT is not set CONFIG_SOUND_SB=mCONFIG_SOUND_YM3812=mCONFIG_SOUND_UART6850=m CONFIG_SOUND_AEDSP16=mCONFIG_SC6600=yCONFIG_SC6600_JOY=yCONFIG_SC6600_CDROM=4 CONFIG_SC6600_CDROMBASE=0x0 CONFIG_SOUND_KAHLUA=mCONFIG_AC97_BUS=mCONFIG_HID_SUPPORT=yCONFIG_HID=mCONFIG_HIDRAW=y
#
# USB Input Devices
#CONFIG_USB_HID=mCONFIG_HID_PID=yCONFIG_USB_HIDDEV=y
#
# Special HID drivers
#CONFIG_HID_A4TECH=mCONFIG_HID_APPLE=mCONFIG_HID_BELKIN=mCONFIG_HID_CHERRY=mCONFIG_HID_CHICONY=mCONFIG_HID_CYPRESS=mCONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not setCONFIG_HID_EZKEY=mCONFIG_HID_KYE=mCONFIG_HID_GYRATION=mCONFIG_HID_TWINHAN=mCONFIG_HID_KENSINGTON=mCONFIG_HID_LOGITECH=mCONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not setCONFIG_HID_MICROSOFT=mCONFIG_HID_MONTEREY=mCONFIG_HID_NTRIG=mCONFIG_HID_PANTHERLORD=mCONFIG_PANTHERLORD_FF=yCONFIG_HID_PETALYNX=mCONFIG_HID_SAMSUNG=mCONFIG_HID_SONY=mCONFIG_HID_SUNPLUS=mCONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not setCONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not setCONFIG_HID_TOPSEED=mCONFIG_HID_THRUSTMASTER=mCONFIG_THRUSTMASTER_FF=yCONFIG_HID_WACOM=mCONFIG_HID_ZEROPLUS=mCONFIG_ZEROPLUS_FF=yCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=m
# CONFIG_USB_DEBUG is not setCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not setCONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not setCONFIG_USB_MON=m
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#CONFIG_USB_C67X00_HCD=m
# CONFIG_USB_XHCI_HCD is not setCONFIG_USB_EHCI_HCD=mCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not setCONFIG_USB_ISP116X_HCD=mCONFIG_USB_ISP1760_HCD=m
# CONFIG_USB_ISP1362_HCD is not setCONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=m
# CONFIG_USB_U132_HCD is not setCONFIG_USB_SL811_HCD=mCONFIG_USB_SL811_CS=mCONFIG_USB_R8A66597_HCD=m
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# Enable Host or Gadget support to see Inventra options #
#
# USB Device Class drivers
#CONFIG_USB_ACM=mCONFIG_USB_PRINTER=mCONFIG_USB_WDM=m
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
#
# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=m CONFIG_USB_STORAGE_FREECOM=m CONFIG_USB_STORAGE_ISD200=m CONFIG_USB_STORAGE_USBAT=m CONFIG_USB_STORAGE_SDDR09=m CONFIG_USB_STORAGE_SDDR55=m CONFIG_USB_STORAGE_JUMPSHOT=m CONFIG_USB_STORAGE_ALAUDA=m CONFIG_USB_STORAGE_ONETOUCH=m CONFIG_USB_STORAGE_KARMA=m # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#CONFIG_USB_MDC800=mCONFIG_USB_MICROTEK=m
#
# USB port drivers
#CONFIG_USB_USS720=mCONFIG_USB_SERIAL=mCONFIG_USB_EZUSB=yCONFIG_USB_SERIAL_GENERIC=yCONFIG_USB_SERIAL_AIRCABLE=mCONFIG_USB_SERIAL_ARK3116=mCONFIG_USB_SERIAL_BELKIN=mCONFIG_USB_SERIAL_CH341=mCONFIG_USB_SERIAL_WHITEHEAT=mCONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP210X is not setCONFIG_USB_SERIAL_CYPRESS_M8=mCONFIG_USB_SERIAL_EMPEG=mCONFIG_USB_SERIAL_FTDI_SIO=mCONFIG_USB_SERIAL_FUNSOFT=mCONFIG_USB_SERIAL_VISOR=mCONFIG_USB_SERIAL_IPAQ=mCONFIG_USB_SERIAL_IR=mCONFIG_USB_SERIAL_EDGEPORT=mCONFIG_USB_SERIAL_EDGEPORT_TI=mCONFIG_USB_SERIAL_GARMIN=mCONFIG_USB_SERIAL_IPW=mCONFIG_USB_SERIAL_IUU=mCONFIG_USB_SERIAL_KEYSPAN_PDA=mCONFIG_USB_SERIAL_KEYSPAN=mCONFIG_USB_SERIAL_KEYSPAN_MPR=yCONFIG_USB_SERIAL_KEYSPAN_USA28=yCONFIG_USB_SERIAL_KEYSPAN_USA28X=yCONFIG_USB_SERIAL_KEYSPAN_USA28XA=yCONFIG_USB_SERIAL_KEYSPAN_USA28XB=yCONFIG_USB_SERIAL_KEYSPAN_USA19=yCONFIG_USB_SERIAL_KEYSPAN_USA18X=yCONFIG_USB_SERIAL_KEYSPAN_USA19W=yCONFIG_USB_SERIAL_KEYSPAN_USA19QW=yCONFIG_USB_SERIAL_KEYSPAN_USA19QI=yCONFIG_USB_SERIAL_KEYSPAN_USA49W=yCONFIG_USB_SERIAL_KEYSPAN_USA49WLC=yCONFIG_USB_SERIAL_KLSI=mCONFIG_USB_SERIAL_KOBIL_SCT=mCONFIG_USB_SERIAL_MCT_U232=mCONFIG_USB_SERIAL_MOS7720=mCONFIG_USB_SERIAL_MOS7840=mCONFIG_USB_SERIAL_MOTOROLA=mCONFIG_USB_SERIAL_NAVMAN=mCONFIG_USB_SERIAL_PL2303=mCONFIG_USB_SERIAL_OTI6858=mCONFIG_USB_SERIAL_QUALCOMM=mCONFIG_USB_SERIAL_SPCP8X5=mCONFIG_USB_SERIAL_HP4X=mCONFIG_USB_SERIAL_SAFE=mCONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIEMENS_MPI is not setCONFIG_USB_SERIAL_SIERRAWIRELESS=m
# CONFIG_USB_SERIAL_SYMBOL is not setCONFIG_USB_SERIAL_TI=mCONFIG_USB_SERIAL_CYBERJACK=mCONFIG_USB_SERIAL_XIRCOM=mCONFIG_USB_SERIAL_OPTION=mCONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_OPTICON is not setCONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#CONFIG_USB_EMI62=mCONFIG_USB_EMI26=mCONFIG_USB_ADUTUX=m
# CONFIG_USB_SEVSEG is not setCONFIG_USB_RIO500=mCONFIG_USB_LEGOTOWER=mCONFIG_USB_LCD=mCONFIG_USB_BERRY_CHARGE=mCONFIG_USB_LED=mCONFIG_USB_CYPRESS_CY7C63=mCONFIG_USB_CYTHERM=mCONFIG_USB_IDMOUSE=mCONFIG_USB_FTDI_ELAN=mCONFIG_USB_APPLEDISPLAY=mCONFIG_USB_SISUSBVGA=mCONFIG_USB_SISUSBVGA_CON=yCONFIG_USB_LD=mCONFIG_USB_TRANCEVIBRATOR=mCONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not setCONFIG_USB_ISIGHTFW=m
# CONFIG_USB_VST is not setCONFIG_USB_ATM=mCONFIG_USB_SPEEDTOUCH=mCONFIG_USB_CXACRU=mCONFIG_USB_UEAGLEATM=mCONFIG_USB_XUSBATM=m
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not setCONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#CONFIG_MMC_BLOCK=mCONFIG_MMC_BLOCK_BOUNCE=yCONFIG_SDIO_UART=mCONFIG_MMC_TEST=m
#
# MMC/SD/SDIO Host Controller Drivers
#CONFIG_MMC_SDHCI=mCONFIG_MMC_SDHCI_PCI=mCONFIG_MMC_RICOH_MMC=m
# CONFIG_MMC_SDHCI_PLTFM is not setCONFIG_MMC_WBSD=mCONFIG_MMC_TIFM_SD=mCONFIG_MMC_SDRICOH_CS=m
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not setCONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not setCONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#CONFIG_MEMSTICK_TIFM_MS=mCONFIG_MEMSTICK_JMICRON_38X=mCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=m
#
# LED drivers
#CONFIG_LEDS_NET48XX=mCONFIG_LEDS_WRAP=m
# CONFIG_LEDS_ALIX2 is not setCONFIG_LEDS_PCA9532=mCONFIG_LEDS_GPIO=mCONFIG_LEDS_GPIO_PLATFORM=y
# CONFIG_LEDS_LP3944 is not setCONFIG_LEDS_CLEVO_MAIL=mCONFIG_LEDS_PCA955X=m
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=mCONFIG_LEDS_TRIGGER_IDE_DISK=yCONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_GPIO is not setCONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target) # # CONFIG_ACCESSIBILITY is not set CONFIG_INFINIBAND=m CONFIG_INFINIBAND_USER_MAD=m CONFIG_INFINIBAND_USER_ACCESS=m CONFIG_INFINIBAND_USER_MEM=y CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_MTHCA_DEBUG=y CONFIG_INFINIBAND_AMSO1100=m # CONFIG_INFINIBAND_AMSO1100_DEBUG is not set CONFIG_INFINIBAND_CXGB3=m # CONFIG_INFINIBAND_CXGB3_DEBUG is not set CONFIG_MLX4_INFINIBAND=m CONFIG_INFINIBAND_NES=m # CONFIG_INFINIBAND_NES_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m CONFIG_INFINIBAND_IPOIB_CM=y CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m CONFIG_INFINIBAND_ISER=m CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not setCONFIG_EDAC_MM_EDAC=mCONFIG_EDAC_AMD76X=mCONFIG_EDAC_E7XXX=mCONFIG_EDAC_E752X=mCONFIG_EDAC_I82875P=mCONFIG_EDAC_I82975X=mCONFIG_EDAC_I3000=m
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not setCONFIG_EDAC_I82860=mCONFIG_EDAC_R82600=mCONFIG_EDAC_I5000=mCONFIG_EDAC_I5100=mCONFIG_RTC_LIB=mCONFIG_RTC_CLASS=m
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=yCONFIG_RTC_INTF_DEV_UIE_EMUL=yCONFIG_RTC_DRV_TEST=m
#
# I2C RTC drivers
#CONFIG_RTC_DRV_DS1307=mCONFIG_RTC_DRV_DS1374=mCONFIG_RTC_DRV_DS1672=mCONFIG_RTC_DRV_MAX6900=mCONFIG_RTC_DRV_RS5C372=mCONFIG_RTC_DRV_ISL1208=mCONFIG_RTC_DRV_X1205=mCONFIG_RTC_DRV_PCF8563=mCONFIG_RTC_DRV_PCF8583=mCONFIG_RTC_DRV_M41T80=mCONFIG_RTC_DRV_M41T80_WDT=yCONFIG_RTC_DRV_S35390A=mCONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#CONFIG_RTC_DRV_M41T94=mCONFIG_RTC_DRV_DS1305=m
# CONFIG_RTC_DRV_DS1390 is not setCONFIG_RTC_DRV_MAX6902=mCONFIG_RTC_DRV_R9701=mCONFIG_RTC_DRV_RS5C348=m
# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_DS1286 is not setCONFIG_RTC_DRV_DS1511=mCONFIG_RTC_DRV_DS1553=mCONFIG_RTC_DRV_DS1742=mCONFIG_RTC_DRV_STK17TA8=mCONFIG_RTC_DRV_M48T86=m
# CONFIG_RTC_DRV_M48T35 is not setCONFIG_RTC_DRV_M48T59=m
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not setCONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not setCONFIG_AUXDISPLAY=yCONFIG_KS0108=mCONFIG_KS0108_PORT=0x378CONFIG_KS0108_DELAY=2CONFIG_CFAG12864B=mCONFIG_CFAG12864B_RATE=20CONFIG_UIO=mCONFIG_UIO_CIF=mCONFIG_UIO_PDRV=mCONFIG_UIO_PDRV_GENIRQ=mCONFIG_UIO_SMX=m
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
#
# TI VLYNQ
#CONFIG_STAGING=yCONFIG_STAGING_EXCLUDE_BUILD=yCONFIG_X86_PLATFORM_DEVICES=yCONFIG_ACER_WMI=m
# CONFIG_ACERHDF is not setCONFIG_ASUS_LAPTOP=m
# CONFIG_DELL_WMI is not setCONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not setCONFIG_TC1100_WMI=mCONFIG_HP_WMI=mCONFIG_MSI_LAPTOP=mCONFIG_PANASONIC_LAPTOP=mCONFIG_COMPAL_LAPTOP=mCONFIG_SONY_LAPTOP=mCONFIG_SONYPI_COMPAT=yCONFIG_THINKPAD_ACPI=m
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not setCONFIG_THINKPAD_ACPI_VIDEO=yCONFIG_THINKPAD_ACPI_HOTKEY_POLL=yCONFIG_INTEL_MENLOW=mCONFIG_EEEPC_LAPTOP=mCONFIG_ACPI_WMI=m
# CONFIG_ACPI_ASUS is not setCONFIG_ACPI_TOSHIBA=m
#
# Firmware Drivers
#CONFIG_EDD=m
# CONFIG_EDD_OFF is not setCONFIG_FIRMWARE_MEMMAP=yCONFIG_DELL_RBU=mCONFIG_DCDBAS=mCONFIG_DMIID=yCONFIG_ISCSI_IBFT_FIND=yCONFIG_ISCSI_IBFT=m
#
# File systems
#CONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not setCONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not setCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=yCONFIG_EXT4_FS=yCONFIG_EXT4DEV_COMPAT=yCONFIG_EXT4_FS_XATTR=yCONFIG_EXT4_FS_POSIX_ACL=yCONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not setCONFIG_JBD=yCONFIG_JBD_DEBUG=yCONFIG_JBD2=yCONFIG_JBD2_DEBUG=yCONFIG_FS_MBCACHE=yCONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not setCONFIG_REISERFS_PROC_INFO=yCONFIG_REISERFS_FS_XATTR=yCONFIG_REISERFS_FS_POSIX_ACL=yCONFIG_REISERFS_FS_SECURITY=yCONFIG_JFS_FS=mCONFIG_JFS_POSIX_ACL=yCONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not setCONFIG_JFS_STATISTICS=yCONFIG_FS_POSIX_ACL=yCONFIG_XFS_FS=mCONFIG_XFS_QUOTA=yCONFIG_XFS_POSIX_ACL=yCONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not setCONFIG_GFS2_FS=m
# CONFIG_GFS2_FS_LOCKING_DLM is not setCONFIG_OCFS2_FS=mCONFIG_OCFS2_FS_O2CB=mCONFIG_OCFS2_FS_USERSPACE_CLUSTER=mCONFIG_OCFS2_FS_STATS=y
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_OCFS2_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not setCONFIG_FILE_LOCKING=yCONFIG_FSNOTIFY=yCONFIG_DNOTIFY=yCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_QUOTA=yCONFIG_QUOTA_NETLINK_INTERFACE=yCONFIG_PRINT_QUOTA_WARNING=yCONFIG_QUOTA_TREE=mCONFIG_QFMT_V1=mCONFIG_QFMT_V2=mCONFIG_QUOTACTL=yCONFIG_AUTOFS_FS=mCONFIG_AUTOFS4_FS=mCONFIG_FUSE_FS=m
# CONFIG_CUSE is not setCONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_UDF_FS=mCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=mCONFIG_MSDOS_FS=mCONFIG_VFAT_FS=mCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not setCONFIG_NTFS_RW=y
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_VMCORE=yCONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=yCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_CONFIGFS_FS=mCONFIG_MISC_FILESYSTEMS=yCONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not setCONFIG_AFFS_FS=mCONFIG_ECRYPT_FS=yCONFIG_HFS_FS=mCONFIG_HFSPLUS_FS=mCONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not setCONFIG_BFS_FS=mCONFIG_EFS_FS=mCONFIG_JFFS2_FS=mCONFIG_JFFS2_FS_DEBUG=0CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not setCONFIG_JFFS2_SUMMARY=yCONFIG_JFFS2_FS_XATTR=yCONFIG_JFFS2_FS_POSIX_ACL=yCONFIG_JFFS2_FS_SECURITY=yCONFIG_JFFS2_COMPRESSION_OPTIONS=yCONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not setCONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not setCONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not setCONFIG_UBIFS_FS=mCONFIG_UBIFS_FS_XATTR=yCONFIG_UBIFS_FS_ADVANCED_COMPR=yCONFIG_UBIFS_FS_LZO=yCONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not setCONFIG_CRAMFS=mCONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_EMBEDDED is not setCONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3CONFIG_VXFS_FS=mCONFIG_MINIX_FS=yCONFIG_OMFS_FS=mCONFIG_HPFS_FS=mCONFIG_QNX4FS_FS=mCONFIG_ROMFS_FS=mCONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not setCONFIG_ROMFS_ON_BLOCK=yCONFIG_SYSV_FS=mCONFIG_UFS_FS=mCONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not setCONFIG_NETWORK_FILESYSTEMS=yCONFIG_NFS_FS=mCONFIG_NFS_V3=yCONFIG_NFS_V3_ACL=yCONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not setCONFIG_NFSD=mCONFIG_NFSD_V2_ACL=yCONFIG_NFSD_V3=yCONFIG_NFSD_V3_ACL=yCONFIG_NFSD_V4=yCONFIG_LOCKD=mCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=mCONFIG_NFS_ACL_SUPPORT=mCONFIG_NFS_COMMON=yCONFIG_SUNRPC=mCONFIG_SUNRPC_GSS=mCONFIG_SUNRPC_XPRT_RDMA=mCONFIG_RPCSEC_GSS_KRB5=mCONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not setCONFIG_CIFS=mCONFIG_CIFS_STATS=yCONFIG_CIFS_STATS2=yCONFIG_CIFS_WEAK_PW_HASH=yCONFIG_CIFS_UPCALL=yCONFIG_CIFS_XATTR=yCONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not setCONFIG_CIFS_DFS_UPCALL=yCONFIG_CIFS_EXPERIMENTAL=yCONFIG_NCP_FS=mCONFIG_NCPFS_PACKET_SIGNING=yCONFIG_NCPFS_IOCTL_LOCKING=yCONFIG_NCPFS_STRONG=yCONFIG_NCPFS_NFS_NS=yCONFIG_NCPFS_OS2_NS=yCONFIG_NCPFS_SMALLDOS=yCONFIG_NCPFS_NLS=yCONFIG_NCPFS_EXTRAS=yCONFIG_CODA_FS=mCONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not setCONFIG_9P_FS=m
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not setCONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not setCONFIG_ATARI_PARTITION=yCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not setCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=yCONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not setCONFIG_SGI_PARTITION=yCONFIG_ULTRIX_PARTITION=yCONFIG_SUN_PARTITION=yCONFIG_KARMA_PARTITION=yCONFIG_EFI_PARTITION=yCONFIG_SYSV68_PARTITION=yCONFIG_NLS=yCONFIG_NLS_DEFAULT="utf8"CONFIG_NLS_CODEPAGE_437=mCONFIG_NLS_CODEPAGE_737=mCONFIG_NLS_CODEPAGE_775=mCONFIG_NLS_CODEPAGE_850=mCONFIG_NLS_CODEPAGE_852=mCONFIG_NLS_CODEPAGE_855=mCONFIG_NLS_CODEPAGE_857=mCONFIG_NLS_CODEPAGE_860=mCONFIG_NLS_CODEPAGE_861=mCONFIG_NLS_CODEPAGE_862=mCONFIG_NLS_CODEPAGE_863=mCONFIG_NLS_CODEPAGE_864=mCONFIG_NLS_CODEPAGE_865=mCONFIG_NLS_CODEPAGE_866=mCONFIG_NLS_CODEPAGE_869=mCONFIG_NLS_CODEPAGE_936=mCONFIG_NLS_CODEPAGE_950=mCONFIG_NLS_CODEPAGE_932=mCONFIG_NLS_CODEPAGE_949=mCONFIG_NLS_CODEPAGE_874=mCONFIG_NLS_ISO8859_8=mCONFIG_NLS_CODEPAGE_1250=mCONFIG_NLS_CODEPAGE_1251=mCONFIG_NLS_ASCII=mCONFIG_NLS_ISO8859_1=mCONFIG_NLS_ISO8859_2=mCONFIG_NLS_ISO8859_3=mCONFIG_NLS_ISO8859_4=mCONFIG_NLS_ISO8859_5=mCONFIG_NLS_ISO8859_6=mCONFIG_NLS_ISO8859_7=mCONFIG_NLS_ISO8859_9=mCONFIG_NLS_ISO8859_13=mCONFIG_NLS_ISO8859_14=mCONFIG_NLS_ISO8859_15=mCONFIG_NLS_KOI8_R=mCONFIG_NLS_KOI8_U=mCONFIG_NLS_UTF8=mCONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not setCONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not setCONFIG_FRAME_WARN=1024CONFIG_MAGIC_SYSRQ=yCONFIG_UNUSED_SYMBOLS=yCONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not setCONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_DETECT_HUNG_TASK is not setCONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not setCONFIG_SLQB_DEBUG=y
# CONFIG_SLQB_DEBUG_ON is not set
# CONFIG_SLQB_SYSFS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not setCONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not setCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not setCONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not setCONFIG_ARCH_WANT_FRAME_POINTERS=yCONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not setCONFIG_RCU_TORTURE_TEST=m
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not setCONFIG_LKDTM=m
# CONFIG_FAULT_INJECTION is not setCONFIG_LATENCYTOP=yCONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not setCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_SYSCALL_TRACEPOINTS=yCONFIG_RING_BUFFER=yCONFIG_EVENT_TRACING=yCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_TRACING=yCONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not setCONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not setCONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not setCONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not setCONFIG_EARLY_PRINTK=yCONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not setCONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_4KSTACKS is not setCONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not setCONFIG_HAVE_MMIOTRACE_SUPPORT=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not setCONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
#CONFIG_KEYS=yCONFIG_KEYS_DEBUG_PROC_KEYS=yCONFIG_SECURITY=yCONFIG_SECURITYFS=yCONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set CONFIG_SECURITY_FILE_CAPABILITIES=y CONFIG_LSM_MMAP_MIN_ADDR=65536 CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set # CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not setCONFIG_XOR_BLOCKS=mCONFIG_ASYNC_CORE=mCONFIG_ASYNC_MEMCPY=mCONFIG_ASYNC_XOR=mCONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not setCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=mCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=mCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_PCOMP=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=yCONFIG_CRYPTO_GF128MUL=mCONFIG_CRYPTO_NULL=mCONFIG_CRYPTO_WORKQUEUE=yCONFIG_CRYPTO_CRYPTD=mCONFIG_CRYPTO_AUTHENC=mCONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#CONFIG_CRYPTO_CCM=mCONFIG_CRYPTO_GCM=mCONFIG_CRYPTO_SEQIV=m
#
# Block modes
#CONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_CTR=mCONFIG_CRYPTO_CTS=mCONFIG_CRYPTO_ECB=yCONFIG_CRYPTO_LRW=mCONFIG_CRYPTO_PCBC=mCONFIG_CRYPTO_XTS=m
#
# Hash modes
#CONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=m
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not setCONFIG_CRYPTO_GHASH=mCONFIG_CRYPTO_MD4=mCONFIG_CRYPTO_MD5=mCONFIG_CRYPTO_MICHAEL_MIC=mCONFIG_CRYPTO_RMD128=mCONFIG_CRYPTO_RMD160=mCONFIG_CRYPTO_RMD256=mCONFIG_CRYPTO_RMD320=mCONFIG_CRYPTO_SHA1=mCONFIG_CRYPTO_SHA256=mCONFIG_CRYPTO_SHA512=mCONFIG_CRYPTO_TGR192=mCONFIG_CRYPTO_WP512=m
#
# Ciphers
#CONFIG_CRYPTO_AES=mCONFIG_CRYPTO_AES_586=mCONFIG_CRYPTO_ANUBIS=mCONFIG_CRYPTO_ARC4=mCONFIG_CRYPTO_BLOWFISH=mCONFIG_CRYPTO_CAMELLIA=mCONFIG_CRYPTO_CAST5=mCONFIG_CRYPTO_CAST6=mCONFIG_CRYPTO_DES=mCONFIG_CRYPTO_FCRYPT=mCONFIG_CRYPTO_KHAZAD=mCONFIG_CRYPTO_SALSA20=mCONFIG_CRYPTO_SALSA20_586=mCONFIG_CRYPTO_SEED=mCONFIG_CRYPTO_SERPENT=mCONFIG_CRYPTO_TEA=m
# CONFIG_CRYPTO_TWOFISH is not setCONFIG_CRYPTO_TWOFISH_COMMON=mCONFIG_CRYPTO_TWOFISH_586=m
#
# Compression
#CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ZLIB is not setCONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#CONFIG_CRYPTO_ANSI_CPRNG=mCONFIG_CRYPTO_HW=yCONFIG_CRYPTO_DEV_PADLOCK=mCONFIG_CRYPTO_DEV_PADLOCK_AES=mCONFIG_CRYPTO_DEV_PADLOCK_SHA=mCONFIG_CRYPTO_DEV_GEODE=mCONFIG_CRYPTO_DEV_HIFN_795X=mCONFIG_CRYPTO_DEV_HIFN_795X_RNG=yCONFIG_HAVE_KVM=yCONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_LGUEST is not setCONFIG_VIRTIO=mCONFIG_VIRTIO_RING=mCONFIG_VIRTIO_PCI=mCONFIG_VIRTIO_BALLOON=mCONFIG_BINARY_PRINTF=y
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_GENERIC_FIND_LAST_BIT=yCONFIG_CRC_CCITT=mCONFIG_CRC16=yCONFIG_CRC_T10DIF=mCONFIG_CRC_ITU_T=mCONFIG_CRC32=yCONFIG_CRC7=mCONFIG_LIBCRC32C=mCONFIG_AUDIT_GENERIC=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=mCONFIG_LZO_COMPRESS=mCONFIG_LZO_DECOMPRESS=mCONFIG_DECOMPRESS_GZIP=yCONFIG_DECOMPRESS_BZIP2=yCONFIG_DECOMPRESS_LZMA=yCONFIG_GENERIC_ALLOCATOR=yCONFIG_REED_SOLOMON=mCONFIG_REED_SOLOMON_DEC16=yCONFIG_TEXTSEARCH=yCONFIG_TEXTSEARCH_KMP=mCONFIG_TEXTSEARCH_BM=mCONFIG_TEXTSEARCH_FSM=mCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_CHECK_SIGNATURE=yCONFIG_NLATTR=yCONFIG_LRU_CACHE=m
Re: Next Sept 7: Bug : skb_release_head_state on x86
Quoted 1 line · Sachin Sant
Will try to boot 0904 and will check if the same problem can be recreated.
I still have this problem with next-20090908.Although the trace looks a bit different.
Haven't checked today's next.
BUG: unable to handle kernel paging request at 00008c90 IP: [<c0349399>] skb_dma_unmap+0x15/0x91 *pdpt = 0000000035445001 *pde = 0000000000000000 Oops: 0000 [#2] SMP last sysfs file: /sys/devices/system/cpu/cpu3/topology/core_siblings Modules linked in: ipv6 microcode fuse loop dm_mod i2c_piix4 tg3 i2c_core pcspkr ppdev button libphy sworks_agp rtc_cmos rtc_core parport_pc sr_mod rtc_lib sg parport agpgart cdrom floppy ohci_hcd ehci_hcd sd_mod crc_t10dif usbcore edd fan ide_pci_generic serverworks ide_core ata_generic pata_serverworks libata ips scsi_mod thermal processor thermal_sys hwmon [last unloaded: speedstep_lib]
Pid: 6, comm: ksoftirqd/1 Tainted: G D (2.6.31-rc9-autotest-next-20090908-5-pae #1) eserver xSeries 235 -[86717AX]-
EIP: 0060:[<c0349399>] EFLAGS: 00010296 CPU: 1
EIP is at skb_dma_unmap+0x15/0x91
EAX: f5d3dc5c EBX: c056bba0 ECX: 00000001 EDX: 00008be8
ESI: f4d3b2f0 EDI: 00008be8 EBP: f5c69ec4 ESP: f5c69eac
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process ksoftirqd/1 (pid: 6, ti=f5c68000 task=f5c4f280 task.ti=f5c68000)
Stack: 00000001 f5d3dc5c f5c69ec4 0000005f f4d3b2f0 00008be8 f5c69f3c f8d191a1 <0> c148347c 00000040 f4900380 f4900340 00000000 f55b2000 f4900340 00000064 <0> f553aa00 00000000 f4900340 00000000 f49006b8 d0622200 0000059a f4d377c0 Call Trace: [<f8d191a1>] ? tg3_poll+0x10f/0x802 [tg3] [<c034c151>] ? net_rx_action+0x93/0x173 [<c01376b8>] ? __do_softirq+0xa7/0x144 [<c013777b>] ? do_softirq+0x26/0x2b [<c01377ca>] ? ksoftirqd+0x4a/0xae [<c0137780>] ? ksoftirqd+0x0/0xae [<c0146a56>] ? kthread+0x61/0x66 [<c01469f5>] ? kthread+0x0/0x66 [<c0103507>] ? kernel_thread_helper+0x7/0x10 Code: 5a c0 74 07 89 d8 e8 f3 7b e6 ff ba f4 ff ff ff 89 d0 5b 5e 5d c3 55 89 e5 57 56 53 83 ec 0c 8b 1d c0 07 61 c0 89 4d e8 89 45 ec <8b> ba a8 00 00 00 83 7d e8 02 8b 42 50 8b 72 54 8b 4f 0c 8b 57 EIP: [<c0349399>] skb_dma_unmap+0x15/0x91 SS:ESP 0068:f5c69eac CR2: 0000000000008c90 ---[ end trace 9239788a6557ba57 ]--- Kernel panic - not syncing: Fatal exception in interrupt
Pid: 6, comm: ksoftirqd/1 Tainted: G D 2.6.31-rc9-autotest-next-20090908-5-pae #1
I went back and tried out some old next versions. Seems like the problem was introduced in next-20090903. next-20090902 worked fine.
Thanks
-Sachin
Signature · 6 lines
--------------------------------- Sachin Sant IBM Linux Technology Center India Systems and Technology Labs Bangalore, India ---------------------------------
Eric Dumazet
Reviewed-by Benjamin Li Reviewed-by Benjamin Li Reviewed-by Benjamin Li Reviewed-by Benjamin Li Reviewed-by Benjamin Li Reviewed-by Benjamin Li Reviewed-by Benjamin Li Reviewed-by Benjamin Li Reviewed-by Benjamin Li Reviewed-by Benjamin Li Reviewed-by Benjamin Li Reviewed-by Benjamin Li Reviewed-by Benjamin Li Reviewed-by Benjamin Li Reviewed-by Benjamin Li Reviewed-by Benjamin Li Reviewed-by Benjamin Li Reviewed-by Benjamin LiRe: Next Sept 7: Bug : skb_release_head_state on x86
Quoted 53 lines · Sachin Sant
Quoted 2 lines · Sachin Sant
Will try to boot 0904 and will check if the same problem can be recreated.
I still have this problem with next-20090908.Although the trace looks a bit different.
Haven't checked today's next.
BUG: unable to handle kernel paging request at 00008c90 IP: [<c0349399>] skb_dma_unmap+0x15/0x91 *pdpt = 0000000035445001 *pde = 0000000000000000 Oops: 0000 [#2] SMP last sysfs file: /sys/devices/system/cpu/cpu3/topology/core_siblings Modules linked in: ipv6 microcode fuse loop dm_mod i2c_piix4 tg3
i2c_corepcspkr ppdev button libphysworks_agprtc_cmosrtc_coreparport_pcsr_modrtc_libsg parport agpgart cdrom floppyohci_hcdehci_hcdsd_modcrc_t10difusbcore edd fanide_pci_genericserverworkside_coreata_genericpata_serverworkslibata ipsscsi_modthermal processorthermal_syshwmon [last unloaded:speedstep_lib]Pid: 6, comm: ksoftirqd/1 Tainted: G D
(2.6.31-rc9-autotest-next-20090908-5-pae #1) eserver xSeries 235 -[86717AX]-
EIP: 0060:[<c0349399>] EFLAGS: 00010296 CPU: 1
EIP is atskb_dma_unmap+0x15/0x91
EAX:f5d3dc5cEBX:c056bba0ECX: 00000001 EDX:00008be8
ESI:f4d3b2f0EDI:00008be8EBP:f5c69ec4ESP:f5c69eac
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process ksoftirqd/1 (pid: 6, ti=f5c68000 task=f5c4f280 task.ti=f5c68000)Stack: 00000001 f5d3dc5c f5c69ec4 0000005f f4d3b2f0 00008be8 f5c69f3c f8d191a1 <0> c148347c 00000040 f4900380 f4900340 00000000 f55b2000 f4900340 00000064 <0> f553aa00 00000000 f4900340 00000000 f49006b8 d0622200 0000059a f4d377c0 Call Trace: [<f8d191a1>] ? tg3_poll+0x10f/0x802 [tg3] [<c034c151>] ? net_rx_action+0x93/0x173 [<c01376b8>] ? __do_softirq+0xa7/0x144 [<c013777b>] ? do_softirq+0x26/0x2b [<c01377ca>] ? ksoftirqd+0x4a/0xae [<c0137780>] ? ksoftirqd+0x0/0xae [<c0146a56>] ? kthread+0x61/0x66 [<c01469f5>] ? kthread+0x0/0x66 [<c0103507>] ? kernel_thread_helper+0x7/0x10 Code: 5a c0 74 07 89 d8 e8 f3 7b e6 ff ba f4 ff ff ff 89 d0 5b 5e 5d c355 89 e5 57 56 53 83 ec 0c 8b 1d c0 07 61 c0 89 4d e8 89 45 ec <8b> ba a8 00 00 00 83 7d e8 02 8b 42 50 8b 72 54 8b 4f 0c 8b 57
EIP: [<c0349399>]skb_dma_unmap+0x15/0x91SS:ESP 0068:f5c69eac
CR2:0000000000008c90---[ end trace 9239788a6557ba57 ]--- Kernel panic - not syncing: Fatal exception in interruptPid: 6, comm: ksoftirqd/1 Tainted: G D
2.6.31-rc9-autotest-next-20090908-5-pae #1
Quoted 7 lines
I went back and tried out some old next versions. Seems like the problem was introduced in next-20090903. next-20090902 worked fine.
Thanks
-Sachin
There were some changes on net-next-2.6 for tg3, you could try to revert them...
(They are working just fine on my machine, but I suspect you have a different chip)
# lspci | grep Ether 14:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5715S Gigabit Ethernet (rev a3) 14:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5715S Gigabit Ethernet (rev a3)
commit 7ab0f2736bfe137a82a7084bbfb5f809da95cabd
Author: Ben Hutchings <[email protected]> Date: Thu Sep 3 10:39:43 2009 +0000
netdev: Remove redundant checks for CAP_NET_ADMIN in MDIO implementations
dev_ioctl() already checks capable(CAP_NET_ADMIN) before calling the driver's implementation of MDIO ioctls.
commit daf09de817353f18bb81a23a023d429cfd258e62
Author: Matt Carlson <[email protected]> Date: Tue Sep 1 13:22:42 2009 +0000
tg3: Update version to 3.102
This patch updates the tg3 version to 3.102.
commit 882e9793faa9425dff581c33b1af45ed10145626
Author: Matt Carlson <[email protected]> Date: Tue Sep 1 13:21:36 2009 +0000
tg3: Add MDIO bus address assignments
The 5717 is a dual port chip that has a shared MDIO bus design. While it is impossible for one function to interface with the wrong phy, that function still needs to know which MDIO bus address to use when interfacing with its own phy. This patch adds code to determine which MDIO bus address to use.
commit a1b950d56de3c72bea3343f54de24c43fb7dc74e
Author: Matt Carlson <[email protected]> Date: Tue Sep 1 13:20:17 2009 +0000
tg3: Add 5717 NVRAM detection routines
This patch adds NVRAM detection routines for the 5717.
commit f6eb9b1fc1411d22c073f5264e5630a541d0f7df
Author: Matt Carlson <[email protected]> Date: Tue Sep 1 13:19:53 2009 +0000
tg3: Add 5717 asic rev
This patch adds the 5717 asic rev.
commit 8d9d7cfc0ec2fe37ff9afd74326d03f38f96ad1b
Author: Matt Carlson <[email protected]> Date: Tue Sep 1 13:19:05 2009 +0000
tg3: Assign rx ret producer indexes by vector
When RSS is enabled, the status block format changes slightly. The "rx_jumbo_consumer", "reserved", and "rx_mini_consumer" members get mapped to the other three rx return ring producer indexes. This patch introduces a new per-interrupt member which identifies which location in the status block a particular vector should look for return ring updates.
commit 0c1d0e2b05e92ad847b3ebe1c75b7974086bc8fa
Author: Matt Carlson <[email protected]> Date: Tue Sep 1 13:16:33 2009 +0000
tg3: Adjust RSS ring allocation strategies
When multivector RSS is enabled, the first interrupt vector is only used to report link interrupts and error conditions. This patch changes the code so that rx and tx ring resources are not allocated for this vector.
commit baf8a94a572928710e9e60967d153a7bf3aebd9c
Author: Matt Carlson <[email protected]> Date: Tue Sep 1 13:13:00 2009 +0000
tg3: Add RSS support
This patch adds code needed to enable RSS.
commit b6080e126012047d42e53154189fdca286d0600e
Author: Matt Carlson <[email protected]> Date: Tue Sep 1 13:12:00 2009 +0000
tg3: Add coalesce parameters for msix vectors
This patch adds code to tune the coalescing parameters for the other msix vectors.
commit fed9781081aa9600765346c108ff22751e003715
Author: Matt Carlson <[email protected]> Date: Tue Sep 1 13:10:19 2009 +0000
tg3: Enable NAPI instances for other int vectors
This patch adds code to enable and disable the rest of the NAPI instances.
commit fe5f5787f0866e9f883bdd90018a354f2f3defd1
Author: Matt Carlson <[email protected]> Date: Tue Sep 1 13:09:39 2009 +0000
tg3: Add TSS support
This patch exposes the additional transmit rings to the kernel and makes the necessary modifications to transmit, open, and close paths.
commit 89aeb3bceaa1a02651206a76a7b9dcb8f3884702
Author: Matt Carlson <[email protected]> Date: Tue Sep 1 13:08:58 2009 +0000
tg3: Update intmbox and coal_now for msix
This patch fixes up two spots that need attention now that msix support has been added.
commit f77a6a8e6cee17b21a43bdf6b853cc2fc0e2c4df
Author: Matt Carlson <[email protected]> Date: Tue Sep 1 13:04:37 2009 +0000
tg3: Add tx and rx ring resource tracking
This patch adds code to assign status block, tx producer ring and rx return ring resources needed for the other interrupt vectors.
commit 646c9eddcffd202bb0f3d906cecf94eaf10cad31
Author: Matt Carlson <[email protected]> Date: Tue Sep 1 12:58:41 2009 +0000
tg3: Add mailbox assignments
The 5717 assigns mailbox locations to interrupt vectors in a rather non-intuitive way. (Much of the complexity stems from legacy compatibility issues.) This patch implements the assignment scheme.
commit 679563f47cd2547a0e091b5bd3ddf30027af6b08
Author: Matt Carlson <[email protected]> Date: Tue Sep 1 12:55:46 2009 +0000
tg3: Add MSI-X support
This patch adds MSI-X support.
commit 4f125f42dd55390016e21f8b3960f99d02d1001f
Author: Matt Carlson <[email protected]> Date: Tue Sep 1 12:55:02 2009 +0000
tg3: Add support code around kernel interrupt API
This patch adds code to support multiple interrupt vectors around the kernel's interrupt API.
commit 2d31ecaf10c4ae03d49aed516481b2839b0220f6
Author: Matt Carlson <[email protected]> Date: Tue Sep 1 12:53:31 2009 +0000
tg3: Create tg3_rings_reset()
This patch moves most of the chip ring setup logic into a separate function. This will make it easier to verify the multi ring setup changes.
commit fd2ce37f8e4a570ce90b141a2e7c476c5b399836
Author: Matt Carlson <[email protected]> Date: Tue Sep 1 12:51:13 2009 +0000
tg3: Add per-int coalesce now member
Each interrupt vector has its own bit in the host coalescing register to force that vector's status block to be updated and generate an interrupt. This patch adds a member to the per-interrupt structure that records which bit belongs to that vector.
commit f19af9c2cc015e42dfe4bd5c383e32066ec2801c
Author: Matt Carlson <[email protected]> Date: Tue Sep 1 12:47:49 2009 +0000
tg3: inline tg3_cond_int()
This patch inlines the code of tg3_cond_int() into the function's only callsite. This prep work makes the following patch cleaner.
Next Sept 7: Bug : skb_release_head_state on x86
In reply to Stephen RothwellToday's next kernel running on a x86 box crashed with
BUG: unable to handle kernel paging request at 00010090 IP: [<c034559d>] skb_release_head_state+0x20/0xac *pdpt = 000000003455c001 *pde = 0000000000000000 Oops: 0002 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu3/topology/core_siblings Modules linked in: ipv6 microcode fuse loop dm_mod ppdev rtc_cmos i2c_piix4
rtc_core i2c_core rtc_lib button sr_mod tg3 parport_pc sworks_agp cdrom floppy parport agpgart pcspkr libphy sg ohci_hcd ehci_hcd sd_mod crc_t10dif usbcore edd fan ide_pci_generic serverworks ide_core ata_generic pata_serverworks libata ips scsi_mod thermal processor thermal_sys hwmon [last unloaded:speedstep_lib]
Pid: 6, comm: ksoftirqd/1 Not tainted (2.6.31-rc9-autotest-next-20090907-5-pae #1) eserver xSeries 235 -[86717AX]-
EIP: 0060:[<c034559d>] EFLAGS: 00010206 CPU: 1
EIP is at skb_release_head_state+0x20/0xac
EAX: 00000000 EBX: f44b5200 ECX: f44b5200 EDX: 00010090
ESI: f5548000 EDI: 00000000 EBP: f5c69dd4 ESP: f5c69dd0
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process ksoftirqd/1 (pid: 6, ti=f5c68000 task=f5c4f280 task.ti=f5c68000)
Stack: f44b5200 f5c69de0 c0345398 f5c69e48 f5c69de8 c034542e f5c69e58 c0388807 <0> f44b5200 f5582900 ced1a038 c07ac124 ced1a030 3e6f7c09 eb152044 f4b4bc00 <0> 00000006 c05a594c f5c69e30 c036a2c0 c07ac124 f4b4bc00 f4b4bc00 eb152030 Call Trace: [<c0345398>] ? __kfree_skb+0xb/0x71 [<c034542e>] ? consume_skb+0x30/0x32 [<c0388807>] ? arp_process+0x572/0x58e [<c036a2c0>] ? ip_local_deliver_finish+0x143/0x207 [<c0388907>] ? arp_rcv+0xda/0xed [<c034bdc2>] ? netif_receive_skb+0x43a/0x459 [<c034bee4>] ? napi_skb_finish+0x1e/0x33 [<c034c267>] ? napi_gro_receive+0x20/0x24 [<f8b3667f>] ? tg3_poll+0x5ed/0x802 [tg3] [<c034c351>] ? net_rx_action+0x93/0x173 [<c013769c>] ? __do_softirq+0xa7/0x144 [<c013775f>] ? do_softirq+0x26/0x2b [<c01377ae>] ? ksoftirqd+0x4a/0xae [<c0137764>] ? ksoftirqd+0x0/0xae [<c0146a2e>] ? kthread+0x61/0x66 [<c01469cd>] ? kthread+0x0/0x66 [<c0103507>] ? kernel_thread_helper+0x7/0x10 Code: fe ff ff 83 c4 0c 5b 5e 5f 5d c3 55 89 e5 53 89 c3 8b 40 18 85 c0 74 05
e8 22 ae 00 00 8b 53 1c c7 43 18 00 00 00 00 85 d2 74 11 <f0> ff 0a 0f 94 c0 84 c0 74 07 89 d0 e8 81 c6 05 00 83 7b 6c 00
EIP: [<c034559d>] skb_release_head_state+0x20/0xac SS:ESP 0068:f5c69dd0
CR2: 0000000000010090
---[ end trace 64c8710cf222dc04 ]---
At the time of crash, kernbench was running on this box.
The corresponding c code is :
0000000000002387 <skb_release_head_state>:
static void skb_release_head_state(struct sk_buff *skb) {
2387: 55 push %rbp 2388: 48 89 e5 mov %rsp,%rbp 238b: 53 push %rbx 238c: 48 89 fb mov %rdi,%rbx 238f: 48 83 ec 08 sub $0x8,%rsp
skb_dst_drop():/usr/local/autobench/var/tmp/build/linux/include/net/dst.h:179 }
...... <SNIP> ......
...... <SNIP> ......
skb_release_head_state():/usr/local/autobench/var/tmp/build/linux/net/core/skbuff.c:395
skb_dst_drop(skb);
#ifdef CONFIG_XFRM
secpath_put(skb->sp);
23a1: 48 8b 7b 30 mov 0x30(%rbx),%rdi
skb_dst_drop():
/usr/local/autobench/var/tmp/build/linux/include/net/dst.h:181
skb->_skb_dst = 0UL; 23a5: 48 c7 43 28 00 00 00 movq $0x0,0x28(%rbx)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This line
23ac: 00
Let me know what other information is required to debug this.
Thanks
-Sachin
Signature · 6 lines
--------------------------------- Sachin Sant IBM Linux Technology Center India Systems and Technology Labs Bangalore, India ---------------------------------
Re: linux-next: Tree for September 7 (scsi/qla2x)
In reply to Stephen RothwellQuoted 3 lines · On Mon, 7 Sep 2009 21:02:06 +1000 Stephen Rothwell wrote:
Hi all,
Changes since 20090904:
when CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete type
in
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);
---
~Randy
LPC 2009, Sept. 23-25, Portland, Oregon
http://linuxplumbersconf.org/2009/
Re: linux-next: Tree for September 7 (scsi/qla2x)
Quoted 7 lines · Randy Dunlap
Quoted 3 lines · On Mon, 7 Sep 2009 21:02:06 +1000 Stephen Rothwell wrote:
Hi all,
Changes since 20090904:
Quoted 7 lines
when
CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete typein
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);
Argg... Some history here... During several unwelcome hardware/firmware events (ISP system error, mailbox command timeouts, etc), the qla2xxx driver can store a 'firmware-dump' (essentially a snapshot of the current state of the ISP firmware). This snapshot is then captured via a user-space tool querying a driver sysfs-node hanging off of a scsi_host's device tree:
/sys/class/scsi_host/host4/device/fw_dump
The dump is then used by our firmware engineering group to help triage the issue.
This recent change:
commit 10a71b40153a19279428053ad9743e15ef414148
Author: Andrew Vasquez <[email protected]>
Date: Tue Aug 25 11:36:15 2009 -0700
[SCSI] qla2xxx: Add firmware-dump kobject uevent notification.
attempted to help 'automate' the task of retrieval by signaling udev to automatically run the 'retrieval' script anytime the driver captured the firmware-dump. Here's a snippet of the udev rule:
# qla2xxx driver KERNEL=="qla2xxx", SUBSYSTEM=="module", ACTION=="change", RUN+="qla2xxx_udev.sh"
Any suggestions here on an alternate driver-specific kobject an LLD can/should use for something like this? I looked previously at other callers of kobject_uevent_env(), but didn't really see a simlar usage-pattern of a driver wanting to signal events to userspace...
Thanks, AV
qla2xxx: Correct compilation issues when CONFIG_MOUDLES=n (was: Re: linux-next: Tree for September 7 (scsi/qla2x))
Randy Dunlap noted:
when CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete type
in
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);
---
Quoted 48 lines · Andrew Vasquez
Quoted 7 lines · Randy Dunlap
Quoted 3 lines · On Mon, 7 Sep 2009 21:02:06 +1000 Stephen Rothwell wrote:
Hi all,
Changes since 20090904:
Quoted 7 lines
when
CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete typein
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);Argg... Some history here... During several unwelcome hardware/firmware events (ISP system error, mailbox command timeouts, etc), the qla2xxx driver can store a 'firmware-dump' (essentially a snapshot of the current state of the ISP firmware). This snapshot is then captured via a user-space tool querying a driver sysfs-node hanging off of a scsi_host's device tree:
/sys/class/scsi_host/host4/device/fw_dumpThe dump is then used by our firmware engineering group to help triage the issue.
This recent change:
commit
10a71b40153a19279428053ad9743e15ef414148
Author: Andrew Vasquez <[email protected]>
Date: Tue Aug 25 11:36:15 2009 -0700[SCSI] qla2xxx: Add firmware-dump kobject uevent notification.
Signed-off-by Andrew Vasquez <[email protected]>Signed-off-by Giridhar Malavali <[email protected]>Signed-off-by James Bottomley <[email protected]>attempted to help 'automate' the task of retrieval by signaling udev to automatically run the 'retrieval' script anytime the driver captured the firmware-dump. Here's a snippet of the udev rule:
# qla2xxx driver KERNEL=="qla2xxx", SUBSYSTEM=="module", ACTION=="change", RUN+="qla2xxx_udev.sh"
Quoted 6 lines
Any suggestions here on an alternate driver-specific kobject an LLD can/should use for something like this? I looked previously at other callers of
kobject_uevent_env(), but didn't really see a simlar usage-pattern of a driver wanting to signal events to userspace...Thanks, AV
Ok, So any strong objections to just having the functionality present when module support is enabled?
drivers/scsi/qla2xxx/qla_os.c +2 -0
@@ -2671,6 +2671,7 @@ qla2x00_post_uevent_work(struct scsi_qla_host *vha, u32 code)static void qla2x00_uevent_emit (struct scsi_qla_host *vha,u32 code) { +#ifdef CONFIG_MODULES char event_string[40 ];char *envp[] = { event_string,NULL };
@@ -2685,6 +2686,7 @@ qla2x00_uevent_emit(struct scsi_qla_host *vha, u32 code) }kobject_uevent_env (&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj,KOBJ_CHANGE , envp); +#endif }void
Randy Dunlap
Acked-byRe: qla2xxx: Correct compilation issues when CONFIG_MOUDLES=n (was: Re: linux-next: Tree for September 7 (scsi/qla2x))
Quoted 11 lines · On Fri, 11 Sep 2009 10:53:41 -0700 Andrew Vasquez wrote:
Randy Dunlap noted:
when
CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete typein
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);Signed-off-by Andrew Vasquez <[email protected]>
Quoted 2 lines
Ok, So any strong objections to just having the functionality present when module support is enabled?
Fine with me. Thanks.
Quoted 14 lines
drivers/scsi/qla2xxx/qla_os.c +1
-0@@ -2671,6 +2671,7 @@ qla2x00_post_uevent_work(struct scsi_qla_host *vha, u32 code)static void qla2x00_uevent_emit (struct scsi_qla_host *vha,u32 code) { +#ifdef CONFIG_MODULES char event_string[40 ];char *envp[] = { event_string,NULL };
drivers/scsi/qla2xxx/qla_os.c qla2x00_uevent_emit(struct scsi_qla_host *vha, u32 code) · line 2692
Quoted 7 lines
drivers/scsi/qla2xxx/qla_os.c +1
-0@@ -2685,6 +2686,7 @@ qla2x00_uevent_emit(struct scsi_qla_host *vha, u32 code) }kobject_uevent_env (&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj,KOBJ_CHANGE , envp); +#endif }void
---
~Randy
LPC 2009, Sept. 23-25, Portland, Oregon
http://linuxplumbersconf.org/2009/
Re: qla2xxx: Correct compilation issues when CONFIG_MOUDLES=n (was: Re: linux-next: Tree for September 7 (scsi/qla2x))
In reply to Andrew VasquezQuoted 86 lines · Andrew Vasquez
Randy Dunlap noted:
when
CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete typein
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);Signed-off-by Andrew Vasquez <[email protected]>---
Quoted 48 lines · Andrew Vasquez
Quoted 7 lines · Randy Dunlap
Quoted 3 lines · On Mon, 7 Sep 2009 21:02:06 +1000 Stephen Rothwell wrote:
Hi all,
Changes since 20090904:
Quoted 7 lines
when
CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete typein
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);Argg... Some history here... During several unwelcome hardware/firmware events (ISP system error, mailbox command timeouts, etc), the qla2xxx driver can store a 'firmware-dump' (essentially a snapshot of the current state of the ISP firmware). This snapshot is then captured via a user-space tool querying a driver sysfs-node hanging off of a scsi_host's device tree:
/sys/class/scsi_host/host4/device/fw_dumpThe dump is then used by our firmware engineering group to help triage the issue.
This recent change:
commit
10a71b40153a19279428053ad9743e15ef414148
Author: Andrew Vasquez <[email protected]>
Date: Tue Aug 25 11:36:15 2009 -0700[SCSI] qla2xxx: Add firmware-dump kobject uevent notification.
Signed-off-by Andrew Vasquez <[email protected]>Signed-off-by Giridhar Malavali <[email protected]>Signed-off-by James Bottomley <[email protected]>attempted to help 'automate' the task of retrieval by signaling udev to automatically run the 'retrieval' script anytime the driver captured the firmware-dump. Here's a snippet of the udev rule:
# qla2xxx driver KERNEL=="qla2xxx", SUBSYSTEM=="module", ACTION=="change", RUN+="qla2xxx_udev.sh"Quoted 6 lines
Any suggestions here on an alternate driver-specific kobject an LLD can/should use for something like this? I looked previously at other callers of
kobject_uevent_env(), but didn't really see a simlar usage-pattern of a driver wanting to signal events to userspace...Thanks, AV
Ok, So any strong objections to just having the functionality present when module support is enabled?
drivers/scsi/qla2xxx/qla_os.c +1
-0@@ -2671,6 +2671,7 @@ qla2x00_post_uevent_work(struct scsi_qla_host *vha, u32 code)static void qla2x00_uevent_emit (struct scsi_qla_host *vha,u32 code) { +#ifdef CONFIG_MODULES char event_string[40 ];char *envp[] = { event_string,NULL };
drivers/scsi/qla2xxx/qla_os.c qla2x00_uevent_emit(struct scsi_qla_host *vha, u32 code) · line 2689
Quoted 4 lines
drivers/scsi/qla2xxx/qla_os.c +1
-0@@ -2685,6 +2686,7 @@ qla2x00_uevent_emit(struct scsi_qla_host *vha, u32 code) }kobject_uevent_env (&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj,KOBJ_CHANGE , envp); +#endif
Only emitting events if the thing is compiled as a module doesn't really look like the right solution. The first question that springs to mind is why are you emitting events against the module kobject in the first place? Why not emit them against the device kobject (which is always present)?
James
Re: qla2xxx: Correct compilation issues when CONFIG_MOUDLES=n (was: Re: linux-next: Tree for September 7 (scsi/qla2x))
Quoted 86 lines · James Bottomley
Quoted 85 lines · Andrew Vasquez
Randy Dunlap noted:
when
CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete typein
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);Signed-off-by Andrew Vasquez <[email protected]>---
Quoted 48 lines · Andrew Vasquez
Quoted 7 lines · Randy Dunlap
Quoted 3 lines · On Mon, 7 Sep 2009 21:02:06 +1000 Stephen Rothwell wrote:
Hi all,
Changes since 20090904:
Quoted 7 lines
when
CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete typein
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);Argg... Some history here... During several unwelcome hardware/firmware events (ISP system error, mailbox command timeouts, etc), the qla2xxx driver can store a 'firmware-dump' (essentially a snapshot of the current state of the ISP firmware). This snapshot is then captured via a user-space tool querying a driver sysfs-node hanging off of a scsi_host's device tree:
/sys/class/scsi_host/host4/device/fw_dumpThe dump is then used by our firmware engineering group to help triage the issue.
This recent change:
commit
10a71b40153a19279428053ad9743e15ef414148
Author: Andrew Vasquez <[email protected]>
Date: Tue Aug 25 11:36:15 2009 -0700[SCSI] qla2xxx: Add firmware-dump kobject uevent notification.
Signed-off-by Andrew Vasquez <[email protected]>Signed-off-by Giridhar Malavali <[email protected]>Signed-off-by James Bottomley <[email protected]>attempted to help 'automate' the task of retrieval by signaling udev to automatically run the 'retrieval' script anytime the driver captured the firmware-dump. Here's a snippet of the udev rule:
# qla2xxx driver KERNEL=="qla2xxx", SUBSYSTEM=="module", ACTION=="change", RUN+="qla2xxx_udev.sh"Quoted 6 lines
Any suggestions here on an alternate driver-specific kobject an LLD can/should use for something like this? I looked previously at other callers of
kobject_uevent_env(), but didn't really see a simlar usage-pattern of a driver wanting to signal events to userspace...Thanks, AV
Ok, So any strong objections to just having the functionality present when module support is enabled?
drivers/scsi/qla2xxx/qla_os.c +1
-0@@ -2671,6 +2671,7 @@ qla2x00_post_uevent_work(struct scsi_qla_host *vha, u32 code)static void qla2x00_uevent_emit (struct scsi_qla_host *vha,u32 code) { +#ifdef CONFIG_MODULES char event_string[40 ];char *envp[] = { event_string,NULL };
Quoted 11 lines
drivers/scsi/qla2xxx/qla_os.c qla2x00_uevent_emit(struct scsi_qla_host *vha, u32 code) · line 2689
Quoted 5 lines
drivers/scsi/qla2xxx/qla_os.c +1
-0@@ -2685,6 +2686,7 @@ qla2x00_uevent_emit(struct scsi_qla_host *vha, u32 code) }kobject_uevent_env (&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj,KOBJ_CHANGE , envp); +#endif Only emitting events if the thing is compiled as a module doesn't really look like the right solution. The first question that springs to mind is why are you emitting events against the module kobject in the first place? Why not emit them against the device kobject (which is always present)?
The struct device's kobj from pdev->dev?
My udev-foo is pathetic, so how exactly would that get multiplexed at the udev side?
KERNEL=="???", SUBSYSTEM=="???", ACTION=="change", RUN+="qla2xxx_udev.sh"
Thanks, AV
Re: qla2xxx: Correct compilation issues when CONFIG_MOUDLES=n (was: Re: linux-next: Tree for September 7 (scsi/qla2x))
Quoted 6 lines · Andrew Vasquez
The struct device's kobj from
pdev->dev?My udev-foo is pathetic, so how exactly would that get multiplexed at the udev side?
KERNEL=="???", SUBSYSTEM=="???", ACTION=="change", RUN+="qla2xxx_udev.sh"
Ok, udevadm helps a bit... Let me see if I can convert this uevent off of:
kobject_uevent_env(&(&vha->hw->pdev->dev)->kobj, KOBJ_CHANGE, envp);
to something meaningful:
UEVENT[1252714722.263731] change /devices/pci0000:17/0000:17:08.0/0000:1e:00.0 (pci) ACTION=change DEVPATH=/devices/pci0000:17/0000:17:08.0/0000:1e:00.0 SUBSYSTEM=pci FW_DUMP=6 DRIVER=qla2xxx PHYSDEVBUS=pci PHYSDEVDRIVER=qla2xxx PCI_CLASS=C0400 PCI_ID=1077:2532 PCI_SUBSYS_ID=1077:015C PCI_SLOT_NAME=0000:1e:00.0 MODALIAS=pci:v00001077d00002532sv00001077sd0000015Cbc0Csc04i00 SEQNUM=3574
Thanks, AV
PATCH v2 1/1 qla2xxx: Correct compilation issues when CONFIG_MOUDLES=n.
Randy Dunlap noted:
when CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete type
in
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);
Trigger kobject event on the 'struct device' hanging off the pci_dev.
---
Quoted 16 lines · Andrew Vasquez
Quoted 7 lines
The struct device's kobj from
pdev->dev?My udev-foo is pathetic, so how exactly would that get multiplexed at the udev side?
KERNEL=="???", SUBSYSTEM=="???", ACTION=="change", RUN+="qla2xxx_udev.sh"Ok, udevadm helps a bit... Let me see if I can convert this uevent off of:
kobject_uevent_env(&(&vha->hw->pdev->dev)->kobj, KOBJ_CHANGE, envp);to something meaningful:
Quoted 15 lines
UEVENT[1252714722.263731] change /devices/pci0000:17/0000:17:08.0/0000:1e:00.0 (pci) ACTION=change DEVPATH=/devices/pci0000:17/0000:17:08.0/0000:1e:00.0 SUBSYSTEM=pci FW_DUMP=6 DRIVER=qla2xxx PHYSDEVBUS=pci PHYSDEVDRIVER=qla2xxx PCI_CLASS=C0400 PCI_ID=1077:2532 PCI_SUBSYS_ID=1077:015C PCI_SLOT_NAME=0000:1e:00.0 MODALIAS=pci:v00001077d00002532sv00001077sd0000015Cbc0Csc04i00 SEQNUM=3574
Ok, with the kobject_uevent_env() change and the udev-rule modified to:
SUBSYSTEM=="pci", ENV{DRIVER}="qla2xxx", ACTION=="change", RUN+="qla2xxx_udev.sh"we're working again.
This seem reasonable?
Thanks, AV
drivers/scsi/qla2xxx/qla_os.c +1 -2
@@ -2683,8 +2683,7 @@ qla2x00_uevent_emit(struct scsi_qla_host *vha, u32 code)/* do nothing */ break ; } -kobject_uevent_env (&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, -KOBJ_CHANGE , envp); +kobject_uevent_env (&(&vha->hw->pdev->dev)->kobj,KOBJ_CHANGE , envp); }void
Re: [PATCHv2] qla2xxx: Correct compilation issues when CONFIG_MOUDLES=n.
Quoted 4 lines · Andrew Vasquez
Randy Dunlap noted:
when
CONFIG_MODULES=n:
Quoted 8 lines
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete typein
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);Trigger kobject event on the 'struct device' hanging off the
pci_dev.
Um, why? What are you trying to do here? kobject change should not be for a device, or a "normal" kobject.
What do you expect userspace to do with this? Where have you documented it?
confused,
greg k-h
Re: [PATCHv2] qla2xxx: Correct compilation issues when CONFIG_MOUDLES=n.
Quoted 12 lines · Greg KH
Quoted 11 lines · Andrew Vasquez
Randy Dunlap noted:
when
CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete typein
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);
Quoted 7 lines
Quoted 1 line
Trigger kobject event on the 'struct device' hanging off the
pci_dev.Um, why? What are you trying to do here? kobject change should not be for a device, or a "normal" kobject.
What do you expect userspace to do with this? Where have you documented it?
The purpose was described here:
http://article.gmane.org/gmane.linux.scsi/54155
Basically we'd like to instruct user-space to retrieve a blob of data automatically. Original implementation used the kboject hanging off the module which does not exist when CONFIG_MODULES=n. It was suggested that perhaps an alternative would be to use 'struct device' kobj. Any tips on how to trigger such a driver-specific event, perhaps a dedicated kobject exported by the driver itself???
Quoted 1 line
confused,
anch'io...
Thanks, AV
Re: [PATCHv2] qla2xxx: Correct compilation issues when CONFIG_MOUDLES=n.
Quoted 22 lines · Andrew Vasquez
Quoted 12 lines · Greg KH
Quoted 11 lines · Andrew Vasquez
Randy Dunlap noted:
when
CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete typein
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);Quoted 7 lines
Quoted 1 line
Trigger kobject event on the 'struct device' hanging off the
pci_dev.Um, why? What are you trying to do here? kobject change should not be for a device, or a "normal" kobject.
What do you expect userspace to do with this? Where have you documented it?
Quoted 6 lines
The purpose was described here:
http://article.gmane.org/gmane.linux.scsi/54155Basically we'd like to instruct user-space to retrieve a blob of data automatically.
Hm, like a firmware object perhaps?
Quoted 5 lines
Original implementation used the kboject hanging off
the module which does not exist whenCONFIG_MODULES=n. It was suggested that perhaps an alternative would be to use 'struct device' kobj. Any tips on how to trigger such a driver-specific event, perhaps a dedicated kobject exported by the driver itself???
Why not use the firmware interface for it, that is what it is designed for, and you will not have to craft any new udev rules.
thanks,
greg k-h
Re: [PATCHv2] qla2xxx: Correct compilation issues when CONFIG_MOUDLES=n.
Quoted 32 lines · Greg KH
Quoted 22 lines · Andrew Vasquez
Quoted 12 lines · Greg KH
Quoted 11 lines · Andrew Vasquez
Randy Dunlap noted:
when
CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete typein
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);Quoted 7 lines
Quoted 1 line
Trigger kobject event on the 'struct device' hanging off the
pci_dev.Um, why? What are you trying to do here? kobject change should not be for a device, or a "normal" kobject.
What do you expect userspace to do with this? Where have you documented it?
Quoted 6 lines
The purpose was described here:
http://article.gmane.org/gmane.linux.scsi/54155Basically we'd like to instruct user-space to retrieve a blob of data automatically.
Hm, like a firmware object perhaps?
Quoted 8 lines
Quoted 5 lines
Original implementation used the kboject hanging off
the module which does not exist whenCONFIG_MODULES=n. It was suggested that perhaps an alternative would be to use 'struct device' kobj. Any tips on how to trigger such a driver-specific event, perhaps a dedicated kobject exported by the driver itself???Why not use the firmware interface for it, that is what it is designed for, and you will not have to craft any new udev rules.
The data is going the wrong way to use the current firmware interface, which is designed to load data from userspace into the kernel. For this interface, we want the data to go the other way (i.e. the kernel has a blob of dump data it would like userspace to save if it can).
I'd be amenable to updating the firmware interface to do this, but it looks like adding a completely new codepath, which it's not clear even belongs there.
James
Re: [PATCHv2] qla2xxx: Correct compilation issues when CONFIG_MOUDLES=n.
Quoted 39 lines · James Bottomley
Quoted 38 lines · Greg KH
Quoted 22 lines · Andrew Vasquez
Quoted 12 lines · Greg KH
Quoted 11 lines · Andrew Vasquez
Randy Dunlap noted:
when
CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete typein
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);Quoted 7 lines
Quoted 1 line
Trigger kobject event on the 'struct device' hanging off the
pci_dev.Um, why? What are you trying to do here? kobject change should not be for a device, or a "normal" kobject.
What do you expect userspace to do with this? Where have you documented it?
Quoted 6 lines
The purpose was described here:
http://article.gmane.org/gmane.linux.scsi/54155Basically we'd like to instruct user-space to retrieve a blob of data automatically.
Hm, like a firmware object perhaps?
Quoted 5 lines
Original implementation used the kboject hanging off
the module which does not exist whenCONFIG_MODULES=n. It was suggested that perhaps an alternative would be to use 'struct device' kobj. Any tips on how to trigger such a driver-specific event, perhaps a dedicated kobject exported by the driver itself???
Quoted 7 lines
Quoted 2 lines
Why not use the firmware interface for it, that is what it is designed for, and you will not have to craft any new udev rules.
The data is going the wrong way to use the current firmware interface, which is designed to load data from userspace into the kernel. For this interface, we want the data to go the other way (i.e. the kernel has a blob of dump data it would like userspace to save if it can).
Ick.
Quoted 3 lines
I'd be amenable to updating the firmware interface to do this, but it looks like adding a completely new codepath, which it's not clear even belongs there.
Well, I don't think it deserves a kobject change event, as that means something a bit different to userspace today, right?
Either way, I see no documentation being added to the Documentation/ABI/ directory describing what is happening here, that needs to be added at the least.
thanks,
greg k-h
Re: [PATCHv2] qla2xxx: Correct compilation issues when CONFIG_MOUDLES=n.
Quoted 43 lines · Greg KH
Quoted 42 lines · James Bottomley
Quoted 40 lines · Greg KH
Quoted 22 lines · Andrew Vasquez
Quoted 12 lines · Greg KH
Quoted 11 lines · Andrew Vasquez
Randy Dunlap noted:
when
CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete typein
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);Quoted 7 lines
Quoted 1 line
Trigger kobject event on the 'struct device' hanging off the
pci_dev.Um, why? What are you trying to do here? kobject change should not be for a device, or a "normal" kobject.
What do you expect userspace to do with this? Where have you documented it?
Quoted 6 lines
The purpose was described here:
http://article.gmane.org/gmane.linux.scsi/54155Basically we'd like to instruct user-space to retrieve a blob of data automatically.
Hm, like a firmware object perhaps?
Quoted 5 lines
Original implementation used the kboject hanging off
the module which does not exist whenCONFIG_MODULES=n. It was suggested that perhaps an alternative would be to use 'struct device' kobj. Any tips on how to trigger such a driver-specific event, perhaps a dedicated kobject exported by the driver itself???Why not use the firmware interface for it, that is what it is designed for, and you will not have to craft any new udev rules.
Quoted 6 lines
Quoted 4 lines
The data is going the wrong way to use the current firmware interface, which is designed to load data from userspace into the kernel. For this interface, we want the data to go the other way (i.e. the kernel has a blob of dump data it would like userspace to save if it can).
Ick.
It's a natural debugging event ... the user can simply program the system to discard the dump.
Quoted 6 lines
Quoted 3 lines
I'd be amenable to updating the firmware interface to do this, but it looks like adding a completely new codepath, which it's not clear even belongs there.
Well, I don't think it deserves a kobject change event, as that means something a bit different to userspace today, right?
Well, the documentation (in include/linux/kobject.h) does say that KOBJ_CHANGED is the dumping ground for events that don't match anything else, which this one seems to qualify as. What else do you suggest?
Quoted 3 lines
Either way, I see no documentation being added to the
Documentation/ABI/directory describing what is happening here, that needs to be added at the least.
OK, we can add that in the next go around.
Andrew, I actually dropped the patch (just this one, not the rest of the qla2xxx patches) from the tree, so we can work on updating this as a whole.
James
PATCH v4 1/1 qla2xxx: Add firmware-dump kobject uevent notification.
---
Quoted 69 lines · James Bottomley
Quoted 43 lines · Greg KH
Quoted 42 lines · James Bottomley
Quoted 40 lines · Greg KH
Quoted 22 lines · Andrew Vasquez
Quoted 12 lines · Greg KH
Quoted 11 lines · Andrew Vasquez
Randy Dunlap noted:
when
CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete typein
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);Quoted 7 lines
Quoted 1 line
Trigger kobject event on the 'struct device' hanging off the
pci_dev.Um, why? What are you trying to do here? kobject change should not be for a device, or a "normal" kobject.
What do you expect userspace to do with this? Where have you documented it?
Quoted 6 lines
The purpose was described here:
http://article.gmane.org/gmane.linux.scsi/54155Basically we'd like to instruct user-space to retrieve a blob of data automatically.
Hm, like a firmware object perhaps?
Quoted 5 lines
Original implementation used the kboject hanging off
the module which does not exist whenCONFIG_MODULES=n. It was suggested that perhaps an alternative would be to use 'struct device' kobj. Any tips on how to trigger such a driver-specific event, perhaps a dedicated kobject exported by the driver itself???Why not use the firmware interface for it, that is what it is designed for, and you will not have to craft any new udev rules.
Quoted 6 lines
Quoted 4 lines
The data is going the wrong way to use the current firmware interface, which is designed to load data from userspace into the kernel. For this interface, we want the data to go the other way (i.e. the kernel has a blob of dump data it would like userspace to save if it can).
Ick.
It's a natural debugging event ... the user can simply program the system to discard the dump.
Quoted 6 lines
Quoted 3 lines
I'd be amenable to updating the firmware interface to do this, but it looks like adding a completely new codepath, which it's not clear even belongs there.
Well, I don't think it deserves a kobject change event, as that means something a bit different to userspace today, right?
Well, the documentation (in
include/linux/kobject.h) does say thatKOBJ_CHANGEDis the dumping ground for events that don't match anything else, which this one seems to qualify as. What else do you suggest?Quoted 3 lines
Either way, I see no documentation being added to the
Documentation/ABI/directory describing what is happening here, that needs to be added at the least.
Quoted 5 lines
OK, we can add that in the next go around.
Andrew, I actually dropped the patch (just this one, not the rest of the qla2xxx patches) from the tree, so we can work on updating this as a whole.
Ok, how about this squashed commit as a first stab at documenting the ABI???
Thanks, AV
Documentation/ABI/stable/sysfs-driver-qla2xxx | 8 +++ drivers/scsi/qla2xxx/qla_dbg.c | 78 +++++++----------------- drivers/scsi/qla2xxx/qla_def.h | 5 ++ drivers/scsi/qla2xxx/qla_gbl.h | 1 + drivers/scsi/qla2xxx/qla_os.c | 35 +++++++++++ 5 files changed, 72 insertions(+), 55 deletions(-) create mode 100644 Documentation/ABI/stable/sysfs-driver-qla2xxx
Documentation/ABI/stable/sysfs-driver-qla2xxx new file +8 -0
@@ -0,0 +1,8 @@ +What: /sys/bus/pci/drivers/qla2xxx/.../devices/* +Date: September 2009 +Contact: QLogic Linux Driver <[email protected]> +Description: qla2xxx-udev.sh currently looks for uevent CHANGE events to + signal a firmware-dump has been generated by the driver and is + ready for retrieval. +Users: qla2xxx-udev.sh. Proposed changes should be mailed to + [email protected]
drivers/scsi/qla2xxx/qla_dbg.c +23 -55
114 lines not on this page · raw message
drivers/scsi/qla2xxx/qla_def.h +5 -0
@@ -2123,6 +2123,7 @@ enum qla_work_type {QLA_EVT_ASYNC_LOGIN_DONE ,QLA_EVT_ASYNC_LOGOUT ,QLA_EVT_ASYNC_LOGOUT_DONE , + QLA_EVT_UEVENT, };
@@ -2146,6 +2147,10 @@ struct qla_work_evt {#define QLA_LOGIO_LOGIN_RETRIED BIT_0u16 data[2 ]; } logio; +struct { +u32 code; +#define QLA_UEVENT_CODE_FW_DUMP 0 + } uevent; } u; };
drivers/scsi/qla2xxx/qla_gbl.h +1 -0
@@ -92,6 +92,7 @@ extern int qla2x00_post_async_logout_work(struct scsi_qla_host *, fc_port_t *, uint16_t *);extern int qla2x00_post_async_logout_done_work (struct scsi_qla_host *,fc_port_t *,uint16_t *); +extern int qla2x00_post_uevent_work (struct scsi_qla_host *,u32 );extern int qla81xx_restart_mpi_firmware (scsi_qla_host_t *);
drivers/scsi/qla2xxx/qla_os.c +35 -0
@@ -11,6 +11,7 @@#include <linux/delay.h> #include <linux/kthread.h> #include <linux/mutex.h> +#include <linux/kobject.h> #include <scsi/scsi_tcq.h> #include <scsi/scsicam.h>
@@ -2653,6 +2654,37 @@ qla2x00_post_async_work(login_done, QLA_EVT_ASYNC_LOGIN_DONE);qla2x00_post_async_work (logout,QLA_EVT_ASYNC_LOGOUT );qla2x00_post_async_work (logout_done,QLA_EVT_ASYNC_LOGOUT_DONE ); +int +qla2x00_post_uevent_work (struct scsi_qla_host *vha,u32 code) +{ +struct qla_work_evt *e; + + e =qla2x00_alloc_work (vha,QLA_EVT_UEVENT ); +if (!e) +return QLA_FUNCTION_FAILED ; + + e->u.uevent.code = code; +return qla2x00_post_work (vha, e); +} + +static void +qla2x00_uevent_emit (struct scsi_qla_host *vha,u32 code) +{ +char event_string[40 ]; +char *envp[] = { event_string,NULL }; + +switch (code) { +case QLA_UEVENT_CODE_FW_DUMP : +snprintf (event_string,sizeof (event_string),"FW_DUMP=%ld" , + vha->host_no); +break ; +default : +/* do nothing */ +break ; + } +kobject_uevent_env (&vha->hw->pdev->dev.kobj,KOBJ_CHANGE , envp); +} +void qla2x00_do_work (struct scsi_qla_host *vha) {
@@ -2690,6 +2722,9 @@ qla2x00_do_work(struct scsi_qla_host *vha)qla2x00_async_logout_done (vha, e->u.logio.fcport, e->u.logio.data);break ; +case QLA_EVT_UEVENT : +qla2x00_uevent_emit (vha, e->u.uevent.code); +break ; }if (e->flags &QLA_EVT_FLAG_FREE )kfree (e);
Signature · 1 line
1.6.5.rc0
Re: [PATCHv2] qla2xxx: Correct compilation issues when CONFIG_MOUDLES=n.
In reply to James BottomleyQuoted 58 lines · James Bottomley
Quoted 43 lines · Greg KH
Quoted 42 lines · James Bottomley
Quoted 40 lines · Greg KH
Quoted 22 lines · Andrew Vasquez
Quoted 12 lines · Greg KH
Quoted 11 lines · Andrew Vasquez
Randy Dunlap noted:
when
CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete typein
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);Quoted 7 lines
Quoted 1 line
Trigger kobject event on the 'struct device' hanging off the
pci_dev.Um, why? What are you trying to do here? kobject change should not be for a device, or a "normal" kobject.
What do you expect userspace to do with this? Where have you documented it?
Quoted 6 lines
The purpose was described here:
http://article.gmane.org/gmane.linux.scsi/54155Basically we'd like to instruct user-space to retrieve a blob of data automatically.
Hm, like a firmware object perhaps?
Quoted 5 lines
Original implementation used the kboject hanging off
the module which does not exist whenCONFIG_MODULES=n. It was suggested that perhaps an alternative would be to use 'struct device' kobj. Any tips on how to trigger such a driver-specific event, perhaps a dedicated kobject exported by the driver itself???Why not use the firmware interface for it, that is what it is designed for, and you will not have to craft any new udev rules.
Quoted 6 lines
Quoted 4 lines
The data is going the wrong way to use the current firmware interface, which is designed to load data from userspace into the kernel. For this interface, we want the data to go the other way (i.e. the kernel has a blob of dump data it would like userspace to save if it can).
Ick.
It's a natural debugging event ... the user can simply program the system to discard the dump.
Quoted 4 lines
Quoted 3 lines
I'd be amenable to updating the firmware interface to do this, but it looks like adding a completely new codepath, which it's not clear even belongs there.
Quoted 6 lines
Quoted 2 lines
Well, I don't think it deserves a kobject change event, as that means something a bit different to userspace today, right?
Well, the documentation (in
include/linux/kobject.h) does say thatKOBJ_CHANGEDis the dumping ground for events that don't match anything else, which this one seems to qualify as. What else do you suggest?
Ok, I can't think of anything else at the moment, sorry.
This is using a binary sysfs file, right?
thanks,
greg k-h
Re: [PATCHv2] qla2xxx: Correct compilation issues when CONFIG_MOUDLES=n.
Quoted 59 lines · Greg KH
Quoted 58 lines · James Bottomley
Quoted 43 lines · Greg KH
Quoted 42 lines · James Bottomley
Quoted 40 lines · Greg KH
Quoted 22 lines · Andrew Vasquez
Quoted 12 lines · Greg KH
Quoted 11 lines · Andrew Vasquez
Randy Dunlap noted:
when
CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete typein
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);Quoted 7 lines
Quoted 1 line
Trigger kobject event on the 'struct device' hanging off the
pci_dev.Um, why? What are you trying to do here? kobject change should not be for a device, or a "normal" kobject.
What do you expect userspace to do with this? Where have you documented it?
Quoted 6 lines
The purpose was described here:
http://article.gmane.org/gmane.linux.scsi/54155
Basically we'd like to instruct user-space to retrieve a blob of data automatically.
Hm, like a firmware object perhaps?
Quoted 5 lines
Original implementation used the kboject hanging off
the module which does not exist whenCONFIG_MODULES=n. It was suggested that perhaps an alternative would be to use 'struct device' kobj. Any tips on how to trigger such a driver-specific event, perhaps a dedicated kobject exported by the driver itself???Why not use the firmware interface for it, that is what it is designed for, and you will not have to craft any new udev rules.
Quoted 6 lines
Quoted 4 lines
The data is going the wrong way to use the current firmware interface, which is designed to load data from userspace into the kernel. For this interface, we want the data to go the other way (i.e. the kernel has a blob of dump data it would like userspace to save if it can).
Ick.
It's a natural debugging event ... the user can simply program the system to discard the dump.
Quoted 4 lines
Quoted 3 lines
I'd be amenable to updating the firmware interface to do this, but it looks like adding a completely new codepath, which it's not clear even belongs there.
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines
Well, I don't think it deserves a kobject change event, as that means something a bit different to userspace today, right?
Well, the documentation (in
include/linux/kobject.h) does say thatKOBJ_CHANGEDis the dumping ground for events that don't match anything else, which this one seems to qualify as. What else do you suggest?Ok, I can't think of anything else at the moment, sorry.
Wouldn't kernel/kmod.c :: call_usermodehelper_pipe() somehow fit for that interface?
Kay
Re: [PATCHv2] qla2xxx: Correct compilation issues when CONFIG_MOUDLES=n.
Quoted 63 lines · Kay Sievers
Quoted 62 lines · Greg KH
Quoted 61 lines · James Bottomley
Quoted 43 lines · Greg KH
Quoted 42 lines · James Bottomley
Quoted 40 lines · Greg KH
Quoted 22 lines · Andrew Vasquez
Quoted 12 lines · Greg KH
Quoted 11 lines · Andrew Vasquez
Randy Dunlap noted:
when
CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete typein
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);Quoted 7 lines
Quoted 1 line
Trigger kobject event on the 'struct device' hanging off the
pci_dev.Um, why? What are you trying to do here? kobject change should not be for a device, or a "normal" kobject.
What do you expect userspace to do with this? Where have you documented it?
Quoted 6 lines
The purpose was described here:
http://article.gmane.org/gmane.linux.scsi/54155
Basically we'd like to instruct user-space to retrieve a blob of data automatically.
Hm, like a firmware object perhaps?
Quoted 5 lines
Original implementation used the kboject hanging off
the module which does not exist whenCONFIG_MODULES=n. It was suggested that perhaps an alternative would be to use 'struct device' kobj. Any tips on how to trigger such a driver-specific event, perhaps a dedicated kobject exported by the driver itself???Why not use the firmware interface for it, that is what it is designed for, and you will not have to craft any new udev rules.
Quoted 6 lines
Quoted 4 lines
The data is going the wrong way to use the current firmware interface, which is designed to load data from userspace into the kernel. For this interface, we want the data to go the other way (i.e. the kernel has a blob of dump data it would like userspace to save if it can).
Ick.
It's a natural debugging event ... the user can simply program the system to discard the dump.
Quoted 6 lines
Quoted 3 lines
I'd be amenable to updating the firmware interface to do this, but it looks like adding a completely new codepath, which it's not clear even belongs there.
Well, I don't think it deserves a kobject change event, as that means something a bit different to userspace today, right?
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
Well, the documentation (in
include/linux/kobject.h) does say thatKOBJ_CHANGEDis the dumping ground for events that don't match anything else, which this one seems to qualify as. What else do you suggest?Ok, I can't think of anything else at the moment, sorry.
Wouldn't
kernel/kmod.c::call_usermodehelper_pipe()somehow fit for that interface?
Ah, yeah, good idea. Anyone tried that?
thanks,
greg k-h
Re: [PATCHv2] qla2xxx: Correct compilation issues when CONFIG_MOUDLES=n.
In reply to Kay SieversQuoted 63 lines · Kay Sievers
Quoted 62 lines · Greg KH
Quoted 61 lines · James Bottomley
Quoted 43 lines · Greg KH
Quoted 42 lines · James Bottomley
Quoted 40 lines · Greg KH
Quoted 22 lines · Andrew Vasquez
Quoted 12 lines · Greg KH
Quoted 11 lines · Andrew Vasquez
Randy Dunlap noted:
when
CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete typein
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);Quoted 7 lines
Quoted 1 line
Trigger kobject event on the 'struct device' hanging off the
pci_dev.Um, why? What are you trying to do here? kobject change should not be for a device, or a "normal" kobject.
What do you expect userspace to do with this? Where have you documented it?
Quoted 6 lines
The purpose was described here:
http://article.gmane.org/gmane.linux.scsi/54155
Basically we'd like to instruct user-space to retrieve a blob of data automatically.
Hm, like a firmware object perhaps?
Quoted 5 lines
Original implementation used the kboject hanging off
the module which does not exist whenCONFIG_MODULES=n. It was suggested that perhaps an alternative would be to use 'struct device' kobj. Any tips on how to trigger such a driver-specific event, perhaps a dedicated kobject exported by the driver itself???Why not use the firmware interface for it, that is what it is designed for, and you will not have to craft any new udev rules.
Quoted 6 lines
Quoted 4 lines
The data is going the wrong way to use the current firmware interface, which is designed to load data from userspace into the kernel. For this interface, we want the data to go the other way (i.e. the kernel has a blob of dump data it would like userspace to save if it can).
Ick.
It's a natural debugging event ... the user can simply program the system to discard the dump.
Quoted 6 lines
Quoted 3 lines
I'd be amenable to updating the firmware interface to do this, but it looks like adding a completely new codepath, which it's not clear even belongs there.
Well, I don't think it deserves a kobject change event, as that means something a bit different to userspace today, right?
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
Well, the documentation (in
include/linux/kobject.h) does say thatKOBJ_CHANGEDis the dumping ground for events that don't match anything else, which this one seems to qualify as. What else do you suggest?Ok, I can't think of anything else at the moment, sorry.
Wouldn't
kernel/kmod.c::call_usermodehelper_pipe()somehow fit for that interface?
The only current consumer of call_usermodehelper_pipe() is fs/exec.c::do_coredump() and it appears to manipulate the blob of data via file-level operations. Would this be a 'notification' alternative? Or, are you suggesting the whole process be redone (both notification and blob-transfer)? Uevent notifications with a udev user-space front-end appears to be a much more simplified and flexible mechanism.
-- av
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCHv2] qla2xxx: Correct compilation issues when CONFIG_MOUDLES=n.
In reply to Greg KHQuoted 62 lines · Greg KH
Quoted 61 lines · James Bottomley
Quoted 43 lines · Greg KH
Quoted 42 lines · James Bottomley
Quoted 40 lines · Greg KH
Quoted 22 lines · Andrew Vasquez
Quoted 12 lines · Greg KH
Quoted 11 lines · Andrew Vasquez
Randy Dunlap noted:
when
CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete typein
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);Quoted 7 lines
Quoted 1 line
Trigger kobject event on the 'struct device' hanging off the
pci_dev.Um, why? What are you trying to do here? kobject change should not be for a device, or a "normal" kobject.
What do you expect userspace to do with this? Where have you documented it?
Quoted 6 lines
The purpose was described here:
http://article.gmane.org/gmane.linux.scsi/54155Basically we'd like to instruct user-space to retrieve a blob of data automatically.
Hm, like a firmware object perhaps?
Quoted 5 lines
Original implementation used the kboject hanging off
the module which does not exist whenCONFIG_MODULES=n. It was suggested that perhaps an alternative would be to use 'struct device' kobj. Any tips on how to trigger such a driver-specific event, perhaps a dedicated kobject exported by the driver itself???Why not use the firmware interface for it, that is what it is designed for, and you will not have to craft any new udev rules.
Quoted 6 lines
Quoted 4 lines
The data is going the wrong way to use the current firmware interface, which is designed to load data from userspace into the kernel. For this interface, we want the data to go the other way (i.e. the kernel has a blob of dump data it would like userspace to save if it can).
Ick.
It's a natural debugging event ... the user can simply program the system to discard the dump.
Quoted 6 lines
Quoted 3 lines
I'd be amenable to updating the firmware interface to do this, but it looks like adding a completely new codepath, which it's not clear even belongs there.
Well, I don't think it deserves a kobject change event, as that means something a bit different to userspace today, right?
Quoted 7 lines
Quoted 3 lines
Well, the documentation (in
include/linux/kobject.h) does say thatKOBJ_CHANGEDis the dumping ground for events that don't match anything else, which this one seems to qualify as. What else do you suggest?Ok, I can't think of anything else at the moment, sorry.
This is using a binary sysfs file, right?
Yes, the userspace tool retrieves the dump from a binary sysfs node:
/sys/class/scsi_host/hostX/device/fw_dump
-- AV
Re: [PATCHv2] qla2xxx: Correct compilation issues when CONFIG_MOUDLES=n.
In reply to Andrew VasquezQuoted 63 lines · Andrew Vasquez
Randy Dunlap noted:
when
CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete typein
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);Trigger kobject event on the 'struct device' hanging off the
pci_dev.Signed-off-by Andrew Vasquez <[email protected]>---
Quoted 16 lines · Andrew Vasquez
Quoted 7 lines
The struct device's kobj from
pdev->dev?My udev-foo is pathetic, so how exactly would that get multiplexed at the udev side?
KERNEL=="???", SUBSYSTEM=="???", ACTION=="change", RUN+="qla2xxx_udev.sh"Ok, udevadm helps a bit... Let me see if I can convert this uevent off of:
kobject_uevent_env(&(&vha->hw->pdev->dev)->kobj, KOBJ_CHANGE, envp);to something meaningful:
Quoted 15 lines
UEVENT[1252714722.263731] change /devices/pci0000:17/0000:17:08.0/0000:1e:00.0 (pci) ACTION=change DEVPATH=/devices/pci0000:17/0000:17:08.0/0000:1e:00.0 SUBSYSTEM=pci FW_DUMP=6 DRIVER=qla2xxx PHYSDEVBUS=pci PHYSDEVDRIVER=qla2xxx PCI_CLASS=C0400 PCI_ID=1077:2532 PCI_SUBSYS_ID=1077:015C PCI_SLOT_NAME=0000:1e:00.0 MODALIAS=pci:v00001077d00002532sv00001077sd0000015Cbc0Csc04i00 SEQNUM=3574Ok, with the
kobject_uevent_env()change and the udev-rule modified to:SUBSYSTEM=="pci", ENV{DRIVER}="qla2xxx", ACTION=="change", RUN+="qla2xxx_udev.sh"we're working again.
This seem reasonable?
Thanks, AV
drivers/scsi/qla2xxx/qla_os.c +0
-0
drivers/scsi/qla2xxx/qla_os.c qla2x00_uevent_emit(struct scsi_qla_host *vha, u32 code) · line 2686
Quoted 6 lines
drivers/scsi/qla2xxx/qla_os.c +1
-2@@ -2683,8 +2683,7 @@ qla2x00_uevent_emit(struct scsi_qla_host *vha, u32 code)/* do nothing */ break ; } -kobject_uevent_env (&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, -KOBJ_CHANGE , envp); +kobject_uevent_env (&(&vha->hw->pdev->dev)->kobj,KOBJ_CHANGE , envp);
Much better. Of course to be perfect, you might like to remember that (&x)->y is actually x.y
so
kobject_uevent_env(&vha->hw->pdev->dev.kobj, ...
James
PATCH v3 1/1 qla2xxx: Correct compilation issues when CONFIG_MODULES=n.
Randy Dunlap noted:
when CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete type
in
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);
Trigger kobject event on the 'struct device' hanging off the pci_dev.
---
On Fri, 11 Sep 2009, James Bottomley wrote: > > diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c > > index 29396c0..369a270 100644 > > --- a/drivers/scsi/qla2xxx/qla_os.c > > +++ b/drivers/scsi/qla2xxx/qla_os.c > > @@ -2683,8 +2683,7 @@ qla2x00_uevent_emit(struct scsi_qla_host *vha, u32 code) > > /* do nothing */ > > break; > > } > > - kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, > > - KOBJ_CHANGE, envp); > > + kobject_uevent_env(&(&vha->hw->pdev->dev)->kobj, KOBJ_CHANGE, envp); > > Much better. Of course to be perfect, you might like to remember that > (&x)->y is actually x.y > > so > > kobject_uevent_env(&vha->hw->pdev->dev.kobj, ... Ahh, of course... Perfection...the enemy of progress...
drivers/scsi/qla2xxx/qla_os.c +1 -2
@@ -2683,8 +2683,7 @@ qla2x00_uevent_emit(struct scsi_qla_host *vha, u32 code)/* do nothing */ break ; } -kobject_uevent_env (&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, -KOBJ_CHANGE , envp); +kobject_uevent_env (&vha->hw->pdev->dev.kobj,KOBJ_CHANGE , envp); }void
Re: [PATCHv3] qla2xxx: Correct compilation issues when CONFIG_MODULES=n.
Quoted 6 lines · On Sat, 12 Sep 2009 09:43:56 -0700 Andrew Vasquez wrote:
Randy Dunlap noted:
when
CONFIG_MODULES=n:
drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete type
Quoted 8 lines
in
kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, KOBJ_CHANGE, envp);Trigger kobject event on the 'struct device' hanging off the
pci_dev.Signed-off-by Andrew Vasquez <[email protected]>
That works. Thanks for your persistence.
Quoted 30 lines
---
On Fri, 11 Sep 2009, James Bottomley wrote: > > diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c > > index 29396c0..369a270 100644 > > --- a/drivers/scsi/qla2xxx/qla_os.c > > +++ b/drivers/scsi/qla2xxx/qla_os.c > > @@ -2683,8 +2683,7 @@ qla2x00_uevent_emit(struct scsi_qla_host *vha, u32 code) > > /* do nothing */ > > break; > > } > > - kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, > > - KOBJ_CHANGE, envp); > > + kobject_uevent_env(&(&vha->hw->pdev->dev)->kobj, KOBJ_CHANGE, envp); > > Much better. Of course to be perfect, you might like to remember that > (&x)->y is actually x.y > > so > > kobject_uevent_env(&vha->hw->pdev->dev.kobj, ... Ahh, of course... Perfection...the enemy of progress...drivers/scsi/qla2xxx/qla_os.c +0
-0
drivers/scsi/qla2xxx/qla_os.c qla2x00_uevent_emit(struct scsi_qla_host *vha, u32 code) · line 2689
Quoted 9 lines
drivers/scsi/qla2xxx/qla_os.c +1
-2@@ -2683,8 +2683,7 @@ qla2x00_uevent_emit(struct scsi_qla_host *vha, u32 code)/* do nothing */ break ; } -kobject_uevent_env (&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj, -KOBJ_CHANGE , envp); +kobject_uevent_env (&vha->hw->pdev->dev.kobj,KOBJ_CHANGE , envp); }void
---
~Randy
LPC 2009, Sept. 23-25, Portland, Oregon
http://linuxplumbersconf.org/2009/
PATCH 1/1 usb gadget: ether needs to select CRC32
In reply to Stephen RothwellFrom: Randy Dunlap <[email protected]>
Fix build error, ether uses/needs to select CRC32 config symbol:
ether.c:(.text+0x271480): undefined reference to `crc32_le'
--- drivers/usb/gadget/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/usb/gadget/Kconfig +1 -0
@@ -627,6 +627,7 @@ config USB_AUDIO config USB_ETH tristate "Ethernet Gadget (with CDC Ethernet support)" depends on NET + select CRC32 help This driver implements Ethernet style communication, in one of several ways:
---
~Randy
LPC 2009, Sept. 23-25, Portland, Oregon
http://linuxplumbersconf.org/2009/
---
~Randy
LPC 2009, Sept. 23-25, Portland, Oregon
http://linuxplumbersconf.org/2009/