Skip to contentSkip to conversation

First round of SCSI updates for the 2.6.32 merge window

GIT PULL James Bottomley 1 participant 1 message Sep 12, 2009 SCSI

lore
Share & tools
lore
#0 lore raw

This is basically a slew of updates to the usual suspects (including a huge update to the fcoe driver) plus a new driver: pmcraid. This has all been through a linux-next cycle for a few rounds and a couple of problem patches detected either fixed or removed for later submission.

The patch is available here:

master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git

The short changelog is:

Andrew Vasquez (8):
qla2xxx: Properly delete rports attached to a vport.
qla2xxx: Correct various NPIV issues.
qla2xxx: Further limit device-table (qla_devtbl) lookup to non-24xx.
qla2xxx: Add asynchronous-login support.
qla2xxx: Generalize srb structure usage.
qla2xxx: Correct display of vp_count in debug printk.
qla2xxx: ISP21xx/22xx do not support FDMI registrations.
qla2xxx: Correctly handle 'global port-unavailable' AEN.

Anil Ravindranath (1):
pmcraid: PMC-Sierra MaxRAID driver to support 6Gb/s SAS RAID controller

Anil Veerabhadrappa (6):
bnx2i : Fix "cid #n not valid" issue
bnx2i : Fix command session number jump issue seen during cable pull test
bnx2i: register given device with cnic if shost != NULL in ep_connect()
bnx2i: convert bnx2i_dev_lock to mutex
bnx2i: bug fixes in bnx2i_init_one to handle error conditions
bnx2i: remove global variable bnx2i_reg_devices

Anirban Chakraborty (2):
qla2xxx: Fix to ensure driver works in sinlge queue mode if multiqueue fails
qla2xxx: Fix a bug that clears the interrupt status register for the base queue

Bart Van Assche (1):
libsrp: fix memory leak in srp_ring_free()

Brian King (1):
ipr: fix buffer overflow

Chandra Seetharaman (5):
scsi_dh: add two SUN devices to the list of devices supported by default
scsi_dh: Use scsi_dh_set_params() in multipath.
scsi_dh: Provide set_params interface in emc device handler
scsi_dh: add the interface scsi_dh_set_params()
scsi_dh: Reference count scsi_dh_attach

Charlie Brady (1):
scsi_dh_rdac: Add support for Sun StorageTek ST2500, ST2510 and ST2530

Chris Leech (15):
fcoe: use rtnl mutex in place of hostlist lock
fcoe: Fix module ref count bug by adding NETDEV UNREGISTER handling
fcoe: move the host-list add/remove to keep out VN_Ports
fcoe: add mutex to protect create and destroy
fcoe: split out per interface setup
fcoe: fcoe_interface create, destroy and refcounting
fcoe: remove fcoe_interface->priv pointer
fcoe: move offload exchange manager pointer from fcoe_port to fcoe_interface
fcoe: move FIP controller from fcoe_port to fcoe_interface
fcoe: move packet handlers from fcoe_port to fcoe_interface
fcoe: move netdev to fcoe_interface
fcoe: Introduce and allocate fcoe_interface structure, 1:1 with net_device
fcoe: interface changes to fcoe_if_create and fcoe_if_destroy
fcoe: fix missing error check in call to fcoe_if_init
libfcoe: fcoe_ctlr_destroy use cancel_work_sync instead of flush_work

Christof Schmitt (13):
zfcp: Remove duplicated code for debug timestamps
zfcp: Handle failures during device allocation correctly
zfcp: Replace config semaphore with mutex
zfcp: Defer resource allocation to first ccw_set_online call
zfcp: Simplify and update ct/gs and els timeout handling
zfcp: Use kthread API for zfcp erp thread
zfcp: Decouple gid_pn requests from erp
zfcp: Implicitly close all wka ports
zfcp: Only issue one test link command per port
zfcp: Remove useless assignment
zfcp: Only collect FSF/HBA debug data for matching trace levels
zfcp: Only collect SCSI debug data for matching trace levels
zfcp: Move debug data from zfcp_data to own data structure

Dave Jones (1):
qla2xxx: Fix __LITTLE_ENDIAN definition warnings

Davidlohr Bueso A (1):
ch: Check NULL for kmalloc() return

Douglas Gilbert (1):
update scsi/constants.c

Ed Lin (1):
stex: Add reset code for st_yel (v2)

Giridhar Malavali (2):
qla2xxx: Update version number to 8.03.01-k6.
qla2xxx: Update version number to 8.03.01-k5

Hannes Reinecke (1):
iscsi_tcp: Evaluate socket state in data_ready()

Heiko Carstens (1):
zfcp: optimize zfcp_qdio_account

James Bottomley (7):
fix oops during scsi scanning
update MAINTAINERS with new email
fix bugs in scsi_vpd_inquiry()
ses: update enclosure data on hot add
ses: add support for enclosure component hot removal
ses: fix hotplug with multiple devices and expanders
scsi_transport_sas: fix incorrect duplicate setup of max_phys

James Smart (9):
fc_transport: Correct max fc_host attribute count
lpfc 8.3.4: Update driver version to 8.3.4
lpfc 8.3.4: Remove spaces before newlines in several log messages lpfc 8.3.4: Add bsg (SGIOv4) support for ELS/CT support lpfc 8.3.4: NPIV vport fixes
lpfc 8.3.4: Fix a pair of FCoE issues
lpfc 8.3.4: Various SLI3 fixes
lpfc 8.3.4: Consistently Implement persistent port disable lpfc 8.3.4: Various SLI4 fixes

Jiri Slaby (2):
nsp_cs: fix buf overflow
lpfc: don't dereference NULL

Joe Eykholt (51):
fcoe: flush per-cpu thread work when destroying interface
libfc: don't swap OX_ID and RX_ID when sending BA_RJT
libfc: send GPN_ID in reaction to single-port RSCNs.
libfc: fix handling of incoming Discover Address (ADISC) requests
libfc: use ADISC to verify rport login state
libfc: LOGO response code had extraeous enter_rtv
libfc: re-login to remote ports that send us LOGO
libfc: fix rport error handling for login-required and invalid ops
libfc: correctly handle incoming PLOGI request.
libfc: improve debug messages for ELS response handlers
libfc: fix: rport_recv_req needs disc_mutex when calling rport_lookup
libfc: move remote port lookup for ELS requests into fc_rport.c.
libfc: don't do discovery before callback is set
libfc: clean up point-to-point discovery code.
libfc: discovery gpn_ft parse bug
libfc: discovery retry should clear pending first.
libfc: fix: empty zone causes endless discovery retries.
libfc: handle discovery failure more correctly.
libfc: rearrange code in fc_disc_gpn_ft_resp()
libfc: discovery restart sequence error fix
libfc: do not log off rports before or after discovery
libfc: move rport_lookup into fc_rport.c
libfc: change to make remote port callback optional
libfc: have rport_create do a lookup for pre-existing rports first
libfc: make rport module maintain the rport list
libfc: simplify fc_lport_rport_callback
libfc: rport debug messages were printing pointer values
libfc: remove unused disc->delay element
libfc: eliminate disc->event
libfc: fix rport event race between READY and LOGO
libfc: don't create dummy (rogue) remote ports
libfc: rename rport event CREATED to READY
libfc: rearrange code in fc_rport_work
libfc: make rport structure optional
libfc: change elsct to use FC_ID instead of rdata
libfc: make fc_rport_priv the primary rport interface.
libfc: fix RPORT_TO_PRIV and PRIV_TO_RPORT() macros.
libfc: change interface for rport_create
libfc: prepare to split off struct fc_rport_priv from fc_rport_libfc_priv
fcoe: remove unnecessary list and lock initializations.
fcoe: libfcoe: extra semicolon in CHECK_LOGGING macros causes compile error
libfc: fix: cancel rport retry timer
libfc: fc_rport_logoff should not drop the lock
libfc: rename rport state "NONE" to "DELETE".
libfc: fix WARNING from fc_seq_start_next on closed exchanges
libfc: in fc_lport_destroy, flush rports after turning off link
libfc: stop login after fabric logoff
libfc: rename lport NONE state to DISABLED
fcoe: stop delivery of received frames before doing lport_destroy()
libfc: change debug messages to give host number.
libfc: remove extra semicolons from debug macros

Johannes Berg (1):
fcoe: convert to %pM

Kashyap, Desai (20):
mptsas : Bump version to 3.04.12
mptsas : FW event thread and scsi mid layer deadlock in SYNCHRONIZE CACHE command mptsas : Send DID_NO_CONNECT for pending IOs of removed device mptsas : PAE Kernel more than 4 GB kernel panic
mptsas : NULL pointer on big endian systems causing Expander not to tear off mptsas : Sanity check for phyinfo is added
mpt2sas: Bump driver version 01.100.06.00
mpt2sas: cleanup interrupt routine and config_request optimization
mpt2sas: Raid 10 Volume is showing as Raid 1E in dmesg
mpt2sas: setting SDEV into RUNNING state from Interrupt context
mpt2sas: Removed wrapper funtions _scsih_link_change.
mpt2sas: Prevent sending command to FW while Host Reset
mpt2sas : Rescan topology from Interrupt context instead of work thread mptsas : Bump version to 3.04.11
mptsas : Code cleanup of host page alloc and diag reset.
mptsas : set max_id to infinite value.
mptsas : Change config request timeout value to 30 seconds.
mptsas : Handle INSUFFICIENT resources status as similar to IOC BUSY status mptsas : Removed mptscsih_timer_expired.
mptsas : Change DEFINED value of can queue for FC and SAS devices.

Lalit Chandivade (2):
qla2xxx: Correct qla2x00_eh_wait_on_command() to wait correctly.
qla2xxx: Process DPC requests within valid Fabric topologies.

Martin K. Petersen (1):
Print failed commands

Michael Reed (1):
reservation conflict after timeout causes device to be taken offline

Michal Schmidt (1):
sg: fix oops in the error path in sg_build_indirect()

Mike Christie (9):
libiscsi, bnx2i: make bound ep check common
libiscsi: add completion function for drivers that do not need pdu processing libiscsi, iscsi_tcp: check suspend bit before each call to xmit_task
iscsi_tcp: add new conn error to indicate tcp conn closed
iscsi class: Add logging to scsi_transport_iscsi.c
qla4xxx: Removed residual from overrun debug print
libiscsi: handle immediate command rejections
libiscsi: don't increment cmdsn if cmd is not sent
ALUA: send STPG if explicit and implicit is supported

Moger, Babu (3):
scsi_dh_rdac: changes for rdac debug logging
scsi_dh_rdac: changes to collect the rdac debug information during the initialization
scsi_dh_rdac: move the init code from rdac_activate to rdac_bus_attach

Randy Dunlap (1):
scsi_transport_fc: fix kernel-doc param name

Ravi Anand (1):
qla2xxx: Pass the command's data residual to upper-layer callers.

Robert Love (5):
libfc: Always reset remote port roles when receiving PRLI
libfc: Initialize fc_rport_identifiers inside fc_rport_create
libfc: Fix misleading debug statement
fcoe: Add format spacing to FCOE_NETDEV_DBG debug macro
libfc: Remove the FC_EM_DBG macro

Sage Weil (1):
ibmvscsi: avoid unnecessary use of kzalloc_pool

Santosh Vernekar (4):
qla2xxx: Correctly set FCF_TAPE_PRESENT flag based on scsi-device.
qla2xxx: Handle RSCN's per master/slave vn-port basis.
qla2xxx: Mark all devices lost on loss of fc port.
qla2xxx: Skip RSCN processing on vha if event is global.

Sebastian Ott (1):
zfcp: proper use of device register

Shyam Sundar (1):
qla2xxx: Pad IOCB structure for size requirements.

Swen Schillig (12):
zfcp: resolve false usage of dd_data in fc_rport
zfcp: Apply common naming conventions to zfcp_fc
zfcp: introduce _setup, _destroy for qdio and FC
zfcp: Update dbf calls
zfcp: Move qdio related data out of zfcp_adapter
zfcp: Separate qdio attributes from zfcp_fsf_req
zfcp: Move workqueue to adapter struct
zfcp: Remove the useless ZFCP_REQ_AUTO_CLEANUP flag
zfcp: Improve request allocation through mempools
zfcp: Replace fsf_req wait_queue with completion
zfcp: fix layering oddities between zfcp_fsf and zfcp_qdio
zfcp: invalid usage after free of port resources

Vasu Dev (7):
fcoe, libfc: fully makes use of per cpu exch pool and then removes em_lock fcoe, libfc: adds per cpu exch pool within exchange manager(EM)
fcoe: removes phys_dev and renames real_dev to netdev.
fcoe, libfc: adds offload EM per eth device with only single xid range per EM
fcoe: modifies fcoe_hostlist_lock uses as prep work to add shared offload EM fcoe, fnic, libfc: modifies current code paths to use EM anchor list fcoe, libfc: adds exchange manager(EM) anchor list per lport and related APIs

[email protected] (1):
scsi_dh_rdac: add support for next generation of Dell PV array

Yi Zou (7):
fcoe: Add sysfs parameter to fcoe for minimum DDP read I/O size
libfc: Remove page flags check for sglist
libfc: Remove FC_FRAME_SG_LEN in fc_fcp_send_data
fcoe: Remove ifdef for NETIF_F_FCOE_CRC and NETIF_F_FSO
fcoe: Call dev_ethtool_get_settings() in fcoe_link_ok
libfcoe: Set fip_flags according to fcf and lport's capability of SPMA support
fcoe: Fix validation of mac address when checking for spma support

And the diffstat:

 MAINTAINERS                                |   10 
 arch/s390/include/asm/timex.h              |    8 
 arch/s390/kernel/debug.c                   |    8 
 arch/s390/kernel/time.c                    |    1 
 drivers/md/dm-mpath.c                      |   42 
 drivers/message/fusion/mptbase.c           |   94 
 drivers/message/fusion/mptbase.h           |   21 
 drivers/message/fusion/mptfc.c             |   19 
 drivers/message/fusion/mptsas.c            |   62 
 drivers/message/fusion/mptscsih.c          |   67 
 drivers/message/fusion/mptscsih.h          |    1 
 drivers/message/fusion/mptspi.c            |   21 
 drivers/misc/enclosure.c                   |   69 
 drivers/s390/scsi/zfcp_aux.c               |  288 -
 drivers/s390/scsi/zfcp_ccw.c               |   94 
 drivers/s390/scsi/zfcp_dbf.c               |  544 +-
 drivers/s390/scsi/zfcp_dbf.h               |  175 
 drivers/s390/scsi/zfcp_def.h               |  183 
 drivers/s390/scsi/zfcp_erp.c               |  155 
 drivers/s390/scsi/zfcp_ext.h               |  102 
 drivers/s390/scsi/zfcp_fc.c                |  176 
 drivers/s390/scsi/zfcp_fsf.c               |  635 +--
 drivers/s390/scsi/zfcp_fsf.h               |    3 
 drivers/s390/scsi/zfcp_qdio.c              |  369 -
 drivers/s390/scsi/zfcp_scsi.c              |   73 
 drivers/s390/scsi/zfcp_sysfs.c             |   34 
 drivers/scsi/Kconfig                       |    6 
 drivers/scsi/Makefile                      |    1 
 drivers/scsi/bnx2i/bnx2i_init.c            |  100 
 drivers/scsi/bnx2i/bnx2i_iscsi.c           |   13 
 drivers/scsi/ch.c                          |    6 
 drivers/scsi/constants.c                   |   95 
 drivers/scsi/device_handler/scsi_dh.c      |   56 
 drivers/scsi/device_handler/scsi_dh_alua.c |    2 
 drivers/scsi/device_handler/scsi_dh_emc.c  |   59 
 drivers/scsi/device_handler/scsi_dh_rdac.c |  116 
 drivers/scsi/fcoe/fcoe.c                   | 1078 +++--
 drivers/scsi/fcoe/fcoe.h                   |   36 
 drivers/scsi/fcoe/libfcoe.c                |   30 
 drivers/scsi/fnic/fnic_fcs.c               |    2 
 drivers/scsi/fnic/fnic_main.c              |   20 
 drivers/scsi/ibmvscsi/ibmvfc.c             |    2 
 drivers/scsi/ipr.h                         |    2 
 drivers/scsi/iscsi_tcp.c                   |   31 
 drivers/scsi/libfc/fc_disc.c               |  523 +-
 drivers/scsi/libfc/fc_elsct.c              |   49 
 drivers/scsi/libfc/fc_exch.c               |  515 +-
 drivers/scsi/libfc/fc_fcp.c                |   31 
 drivers/scsi/libfc/fc_lport.c              |  283 -
 drivers/scsi/libfc/fc_rport.c              | 1144 +++--
 drivers/scsi/libiscsi.c                    |  201 -
 drivers/scsi/libsrp.c                      |    1 
 drivers/scsi/lpfc/Makefile                 |    2 
 drivers/scsi/lpfc/lpfc.h                   |   19 
 drivers/scsi/lpfc/lpfc_attr.c              |   10 
 drivers/scsi/lpfc/lpfc_bsg.c               |  904 ++++
 drivers/scsi/lpfc/lpfc_crtn.h              |   18 
 drivers/scsi/lpfc/lpfc_ct.c                |    2 
 drivers/scsi/lpfc/lpfc_els.c               |    2 
 drivers/scsi/lpfc/lpfc_hbadisc.c           |  259 +
 drivers/scsi/lpfc/lpfc_hw.h                |    4 
 drivers/scsi/lpfc/lpfc_hw4.h               |   74 
 drivers/scsi/lpfc/lpfc_init.c              |  134 
 drivers/scsi/lpfc/lpfc_mbox.c              |   93 
 drivers/scsi/lpfc/lpfc_mem.c               |   41 
 drivers/scsi/lpfc/lpfc_nl.h                |   20 
 drivers/scsi/lpfc/lpfc_scsi.c              |    7 
 drivers/scsi/lpfc/lpfc_sli.c               |  263 +
 drivers/scsi/lpfc/lpfc_sli4.h              |    5 
 drivers/scsi/lpfc/lpfc_version.h           |    2 
 drivers/scsi/lpfc/lpfc_vport.c             |   53 
 drivers/scsi/mpt2sas/mpt2sas_base.c        |   96 
 drivers/scsi/mpt2sas/mpt2sas_base.h        |   51 
 drivers/scsi/mpt2sas/mpt2sas_config.c      |  904 +---
 drivers/scsi/mpt2sas/mpt2sas_ctl.c         |   16 
 drivers/scsi/mpt2sas/mpt2sas_scsih.c       |  252 -
 drivers/scsi/mpt2sas/mpt2sas_transport.c   |   33 
 drivers/scsi/pcmcia/nsp_cs.c               |    2 
 drivers/scsi/pmcraid.c                     | 5604 +++++++++++++++++++++++++++++
 drivers/scsi/pmcraid.h                     | 1029 +++++
 drivers/scsi/qla2xxx/qla_attr.c            |    9 
 drivers/scsi/qla2xxx/qla_def.h             |   39 
 drivers/scsi/qla2xxx/qla_fw.h              |    2 
 drivers/scsi/qla2xxx/qla_gbl.h             |   20 
 drivers/scsi/qla2xxx/qla_gs.c              |    4 
 drivers/scsi/qla2xxx/qla_init.c            |  239 +
 drivers/scsi/qla2xxx/qla_iocb.c            |  206 +
 drivers/scsi/qla2xxx/qla_isr.c             |  309 +
 drivers/scsi/qla2xxx/qla_mbx.c             |    7 
 drivers/scsi/qla2xxx/qla_mid.c             |   27 
 drivers/scsi/qla2xxx/qla_os.c              |  141 
 drivers/scsi/qla2xxx/qla_version.h         |    2 
 drivers/scsi/qla4xxx/ql4_isr.c             |    8 
 drivers/scsi/scsi.c                        |   13 
 drivers/scsi/scsi_error.c                  |    6 
 drivers/scsi/scsi_lib.c                    |    1 
 drivers/scsi/scsi_transport_fc.c           |    4 
 drivers/scsi/scsi_transport_iscsi.c        |   73 
 drivers/scsi/scsi_transport_sas.c          |    4 
 drivers/scsi/sd.c                          |    2 
 drivers/scsi/ses.c                         |  209 -
 drivers/scsi/sg.c                          |    2 
 drivers/scsi/stex.c                        |   33 
 include/linux/enclosure.h                  |    5 
 include/scsi/fc/fc_gs.h                    |    1 
 include/scsi/fc_encode.h                   |   60 
 include/scsi/fc_frame.h                    |    7 
 include/scsi/iscsi_if.h                    |    1 
 include/scsi/libfc.h                       |  244 -
 include/scsi/libiscsi.h                    |    3 
 include/scsi/scsi_device.h                 |    3 
 include/scsi/scsi_dh.h                     |    5 
 112 files changed, 14377 insertions(+), 4867 deletions(-)

James