Skip to contentSkip to conversation

TTY patches for 2.6.31-git

PATCH In review Greg KH 4 participants 86 messages Sep 19, 2009 – Jan 26, 2010 Page 1 of 2

Subsystems (13)
lore
Share & tools
lore

Greg KH

author
#0 lore raw

PATCH 1/1 TTY patches for 2.6.31-git

Here is the big tty tree merge for your 2.6.31-git tree.

It contains a lot of tty core changes, and a bunch of usb-serial regression fixes, which depend on some tty changes, which is why they are all in this tree.

Please pull from:

	master.kernel.org:/pub/scm/linux/kernel/git/gregkh/tty-2.6.git/

All of these patches have been in the -next and -mm trees for quite a while.

The full patches will be sent to the linux-kernel mailing list, if anyone wants to see them.

thanks,

greg k-h

------------

 arch/mn10300/kernel/asm-offsets.c       |    6 +-
 drivers/char/cyclades.c                 | 2311 ++++++++-----------------------
 drivers/char/esp.c                      |    7 +-
 drivers/char/isicom.c                   |   57 +-
 drivers/char/mxser.c                    |   62 +-
 drivers/char/n_tty.c                    |   79 +-
 drivers/char/riscom8.c                  |  164 ++--
 drivers/char/tty_io.c                   |   22 +-
 drivers/char/tty_ioctl.c                |    4 +-
 drivers/char/tty_ldisc.c                |   82 +-
 drivers/char/tty_port.c                 |   31 +-
 drivers/char/vt.c                       |   14 +-
 drivers/char/vt_ioctl.c                 |  482 ++++++-
 drivers/isdn/gigaset/interface.c        |   19 +-
 drivers/net/slip.c                      |   96 +-
 drivers/serial/21285.c                  |    8 +-
 drivers/serial/8250.c                   |   28 +-
 drivers/serial/8250.h                   |    1 +
 drivers/serial/amba-pl010.c             |    6 +-
 drivers/serial/amba-pl011.c             |    6 +-
 drivers/serial/atmel_serial.c           |   14 +-
 drivers/serial/bfin_5xx.c               |   24 +-
 drivers/serial/bfin_sport_uart.c        |    6 +-
 drivers/serial/clps711x.c               |    4 +-
 drivers/serial/cpm_uart/cpm_uart_core.c |    2 +-
 drivers/serial/dz.c                     |    6 +-
 drivers/serial/icom.c                   |   20 +-
 drivers/serial/imx.c                    |   16 +-
 drivers/serial/ioc3_serial.c            |   54 +-
 drivers/serial/ioc4_serial.c            |   68 +-
 drivers/serial/ip22zilog.c              |   14 +-
 drivers/serial/jsm/jsm_neo.c            |    2 +-
 drivers/serial/jsm/jsm_tty.c            |   20 +-
 drivers/serial/m32r_sio.c               |    6 +-
 drivers/serial/max3100.c                |   16 +-
 drivers/serial/mcf.c                    |    4 +-
 drivers/serial/mpc52xx_uart.c           |    4 +-
 drivers/serial/mpsc.c                   |    4 +-
 drivers/serial/msm_serial.c             |    6 +-
 drivers/serial/mux.c                    |    4 +-
 drivers/serial/netx-serial.c            |    6 +-
 drivers/serial/nwpserial.c              |    4 +-
 drivers/serial/pmac_zilog.c             |   20 +-
 drivers/serial/pnx8xxx_uart.c           |    8 +-
 drivers/serial/pxa.c                    |    6 +-
 drivers/serial/sa1100.c                 |    8 +-
 drivers/serial/samsung.c                |    8 +-
 drivers/serial/sb1250-duart.c           |    6 +-
 drivers/serial/sc26xx.c                 |   10 +-
 drivers/serial/serial_core.c            |  876 ++++++------
 drivers/serial/serial_cs.c              |    1 +
 drivers/serial/serial_ks8695.c          |    6 +-
 drivers/serial/serial_lh7a40x.c         |    6 +-
 drivers/serial/serial_txx9.c            |    4 +-
 drivers/serial/sh-sci.c                 |   10 +-
 drivers/serial/sn_console.c             |   22 +-
 drivers/serial/sunhv.c                  |    8 +-
 drivers/serial/sunsab.c                 |   10 +-
 drivers/serial/sunsu.c                  |    6 +-
 drivers/serial/sunzilog.c               |   14 +-
 drivers/serial/timbuart.c               |   10 +-
 drivers/serial/uartlite.c               |   19 +-
 drivers/serial/ucc_uart.c               |    4 +-
 drivers/serial/vr41xx_siu.c             |    6 +-
 drivers/serial/zs.c                     |    6 +-
 drivers/usb/class/cdc-acm.c             |    5 +-
 drivers/usb/serial/ark3116.c            |   51 +-
 drivers/usb/serial/belkin_sa.c          |    4 +-
 drivers/usb/serial/ch341.c              |    5 +-
 drivers/usb/serial/console.c            |   32 +-
 drivers/usb/serial/cp210x.c             |   12 +-
 drivers/usb/serial/cyberjack.c          |    4 +-
 drivers/usb/serial/cypress_m8.c         |   18 +-
 drivers/usb/serial/digi_acceleport.c    |    6 +-
 drivers/usb/serial/empeg.c              |   18 +-
 drivers/usb/serial/ftdi_sio.c           |    6 +-
 drivers/usb/serial/garmin_gps.c         |    3 +-
 drivers/usb/serial/generic.c            |    3 +-
 drivers/usb/serial/io_edgeport.c        |    6 +-
 drivers/usb/serial/io_ti.c              |    3 +-
 drivers/usb/serial/ipaq.c               |    9 +-
 drivers/usb/serial/ipw.c                |    3 +-
 drivers/usb/serial/ir-usb.c             |    6 +-
 drivers/usb/serial/iuu_phoenix.c        |   34 +-
 drivers/usb/serial/keyspan.c            |    3 +-
 drivers/usb/serial/keyspan.h            |    3 +-
 drivers/usb/serial/keyspan_pda.c        |    2 +-
 drivers/usb/serial/kl5kusb105.c         |   10 +-
 drivers/usb/serial/kobil_sct.c          |   28 +-
 drivers/usb/serial/mct_u232.c           |   15 +-
 drivers/usb/serial/mos7720.c            |  123 ++-
 drivers/usb/serial/mos7840.c            |  118 +--
 drivers/usb/serial/navman.c             |    3 +-
 drivers/usb/serial/omninet.c            |    6 +-
 drivers/usb/serial/opticon.c            |    3 +-
 drivers/usb/serial/option.c             |    6 +-
 drivers/usb/serial/oti6858.c            |   27 +-
 drivers/usb/serial/pl2303.c             |    5 +-
 drivers/usb/serial/sierra.c             |    3 +-
 drivers/usb/serial/spcp8x5.c            |   26 +-
 drivers/usb/serial/symbolserial.c       |    3 +-
 drivers/usb/serial/ti_usb_3410_5052.c   |    6 +-
 drivers/usb/serial/usb-serial.c         |  385 +++---
 drivers/usb/serial/usb_debug.c          |    5 +-
 drivers/usb/serial/visor.c              |    6 +-
 drivers/usb/serial/whiteheat.c          |   11 +-
 include/linux/cyclades.h                |   11 +-
 include/linux/hayesesp.h                |    1 -
 include/linux/kfifo.h                   |    4 +-
 include/linux/serial.h                  |    2 +
 include/linux/serial_8250.h             |    1 +
 include/linux/serial_core.h             |   93 +-
 include/linux/tty.h                     |   19 +-
 include/linux/usb/serial.h              |   10 +-
 include/linux/vt.h                      |   32 +-
 include/linux/vt_kern.h                 |   16 +-
 kernel/kfifo.c                          |    2 +-
 kernel/power/console.c                  |   63 +-
 118 files changed, 2572 insertions(+), 3570 deletions(-)

---------------

Alan Cox (33):
slip: Clean up create and destroy
kfifo: Use "const" definitions
tty: Fix a typo noted in passing
mos7840: remove old dead modem logic
tty: Add a full port_close function
riscom8: split open and close methods up
mxser: Split close ready for a standard tty_port_close method
isicom: Split the close hardware bits out
tty: riscom8 kref and tty_port_close
cyclades: use the full port_close function
tty: make the kref destructor occur asynchronously
cdc_acm: Fix to use modern speed interfaces
tty: USB hangup is racy
tty: remove dtr/rts use from the driver open methods
tty: USB can now use the shutdown method for kref based freeing of ports
vt: add an event interface
vt: remove power stuff from kernel/power
vt: move kernel stuff out of vt.h
vt: add an activate and lock
tty: USB does not need the filp argument in the drivers
isicom: split the open method for the isicom device
serial: kill off uart_info
serial: Fold closing_* fields into the tty_port ones
serial: use tty_port pointers in the core code
serial: move count into the tty_port version
serial: move the flags into the tty_port field
serial: kill off uif_t
serial: replace the state mutex with the tty port mutex
serial: move delta_msr_wait into the tty_port
serial: move port users helper
serial: kill USF_CLOSING_* definitions
serial: introduce tty krefs
tty: USB serial termios bits

Alan Stern (10):
TTY: fix typos
usb-serial: change referencing of port and serial structures
usb-serial: put subroutines in logical order
usb-serial: change logic of serial lookups
usb-serial: acquire references when a new tty is installed
usb-serial: fix termios initialization logic
usb-serial: rename subroutines
usb-serial: add missing tests and debug lines
usb-serial: straighten out serial_open
USB serial: update the console driver

Anton Vorontsov (1):
8250: Now honours baud rate lower bounds

Arnd Bergmann (1):
tty: handle VT specific compat ioctls in vt driver

Deepak Saxena (1):
Set proper console speed on resume if console suspend is disabled

Jaswinder Singh Rajput (1):
tty: includecheck fix: drivers/char, vt.c

Jiri Slaby (19):
cyclades: add tty refcounting
cyclades: remove block_til_ready
cyclades: avoid addresses recomputation
cyclades: switch to tty_port_hangup
cyclades: close cleanup
cyclades: overall cleanup
cyclades: sleep instead busy-wait
cyclades: use dtr_rts helpers
cyclades: merge cy_startup tails
cyclades: ioctls cleanup
cyclades: tiocm cleanup
cyclades: introduce cyy_readb/writeb
cyclades: remove more duplicated code
tty: Power: fix suspend vt regression
tty: riscom8, fix shutdown declaration
tty: riscom8, fix tty refcnt
tty: USB: serial/mct_u232, fix tty refcnt
tty: Char: mxser, add support for CP112UL
tty: Char: mxser, use THRE for ASPP_OQUEUE ioctl

Joe Peterson (2):
n_tty: honor opost flag for echoes
n_tty: move echoctl check and clean up logic

Kees Schoenmakers (2):
MOS7720 has no tiocmget method
tty: usb_serial_mos7720: Fix get_lsr_info

Linus Torvalds (2):
tty-ldisc: make /proc/tty/ldiscs use ldisc_ops instead of ldiscs
tty-ldisc: get rid of tty_ldisc_try_get() helper function

Marcin Slusarz (1):
tty: vt: use printk_once

Mike Frysinger (1):
serial: bfin_5xx: fix building as module when early printk is enabled

Peter Korsgaard (1):
uartlite: support shared interrupt lines

Roel Kluin (1):
tty: icom: bit and/or confusion?

Tilman Schmidt (1):
tty: gigaset: really fix chars_in_buffer

Vikram Pandita (1):
serial: 8250: add IRQ trigger support

Wolfram Sang (1):
tty: serial/pcmcia: add ID for Advantech card

#1 lore raw

PATCH 1/79 tty: gigaset: really fix chars_in_buffer

From: Tilman Schmidt <[email protected]>

The tty_operation chars_in_buffer() is not allowed to return a negative value to signal an error. Corrects the problem flagged by commit 23198fda7182969b619613a555f8645fdc3dc334, "tty: fix chars_in_buffers".

---
 drivers/isdn/gigaset/interface.c |   19 +++++++------------
 1 files changed, 7 insertions(+), 12 deletions(-)
drivers/isdn/gigaset/interface.c +7 -12
index 8ff7e35..f33ac27 100644
@@ -408,33 +408,28 @@ static int if_write_room(struct tty_struct *tty)
 	return retval;
 }
 
-/* FIXME: This function does not have error returns */
-
 static int if_chars_in_buffer(struct tty_struct *tty)
 {
 	struct cardstate *cs;
-	int retval = -ENODEV;
+	int retval = 0;
 
 	cs = (struct cardstate *) tty->driver_data;
 	if (!cs) {
 		pr_err("%s: no cardstate\n", __func__);
-		return -ENODEV;
+		return 0;
 	}
 
 	gig_dbg(DEBUG_IF, "%u: %s()", cs->minor_index, __func__);
 
-	if (mutex_lock_interruptible(&cs->mutex))
-		return -ERESTARTSYS; // FIXME -EINTR?
+	mutex_lock(&cs->mutex);
 
-	if (!cs->connected) {
+	if (!cs->connected)
 		gig_dbg(DEBUG_IF, "not connected");
-		retval = -ENODEV;
-	} else if (!cs->open_count)
+	else if (!cs->open_count)
 		dev_warn(cs->dev, "%s: device not opened\n", __func__);
-	else if (cs->mstate != MS_LOCKED) {
+	else if (cs->mstate != MS_LOCKED)
 		dev_warn(cs->dev, "can't write to unlocked device\n");
-		retval = -EBUSY;
-	} else
+	else
 		retval = cs->ops->chars_in_buffer(cs);
 
 	mutex_unlock(&cs->mutex);
Signature · 1 line
1.6.4.2
#2 lore raw

PATCH 2/79 serial: bfin_5xx: fix building as module when early printk is enabled

In reply to Greg KH

From: Mike Frysinger <[email protected]>

Since early printk only makes sense/works when the serial driver is built into the kernel, disable the option for this driver when it is going to be built as a module. Otherwise we get build failures due to the ifdef handling.

---
 drivers/serial/bfin_5xx.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)
drivers/serial/bfin_5xx.c +4 -0
index b4a7650..4fff4e5 100644
@@ -42,6 +42,10 @@
 # undef CONFIG_EARLY_PRINTK
 #endif
 
+#ifdef CONFIG_SERIAL_BFIN_MODULE
+# undef CONFIG_EARLY_PRINTK
+#endif
+
 /* UART name and device definitions */
 #define BFIN_SERIAL_NAME	"ttyBF"
 #define BFIN_SERIAL_MAJOR	204
Signature · 1 line
1.6.4.2
#3 lore raw

PATCH 3/79 tty: serial/pcmcia: add ID for Advantech card

In reply to Greg KH

From: Wolfram Sang <[email protected]>

Add ID as reported in:

http://lists.infradead.org/pipermail/linux-pcmcia/2009-May/006127.html

---
 drivers/serial/serial_cs.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
drivers/serial/serial_cs.c +1 -0
index ed4648b..a3bb490 100644
@@ -884,6 +884,7 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
 	PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
 	PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
+	PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "COMpad2.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "COMpad4.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "COMpad2.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
Signature · 1 line
1.6.4.2
#4 lore raw

PATCH 4/79 tty-ldisc: make /proc/tty/ldiscs use ldisc_ops instead of ldiscs

In reply to Greg KH

From: Linus Torvalds <[email protected]>

The /proc/tty/ldiscs file is totally and utterly un-interested in the "struct tty_ldisc" structures, and only cares about the underlying ldisc operations.

So don't make it create a dummy 'struct ldisc' only to get a pointer to the operations, and then destroy it. Instead, we split up the function 'tty_ldisc_try_get()', and create a 'get_ldops()' helper that just looks up the ldisc operations based on the ldisc number.

That makes the code simpler to read (smaller and more well-defined helper functions), and allows the /proc functions to avoid creating that useless dummy only to immediately free it again.

---
 drivers/char/tty_ldisc.c |   65 +++++++++++++++++++++++++++------------------
 1 files changed, 39 insertions(+), 26 deletions(-)
drivers/char/tty_ldisc.c +39 -26
index e48af9f..cbfacc0 100644
@@ -145,6 +145,34 @@ int tty_unregister_ldisc(int disc)
 }
 EXPORT_SYMBOL(tty_unregister_ldisc);
 
+static struct tty_ldisc_ops *get_ldops(int disc)
+{
+	unsigned long flags;
+	struct tty_ldisc_ops *ldops, *ret;
+
+	spin_lock_irqsave(&tty_ldisc_lock, flags);
+	ret = ERR_PTR(-EINVAL);
+	ldops = tty_ldiscs[disc];
+	if (ldops) {
+		ret = ERR_PTR(-EAGAIN);
+		if (try_module_get(ldops->owner)) {
+			ldops->refcount++;
+			ret = ldops;
+		}
+	}
+	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+	return ret;
+}
+
+static void put_ldops(struct tty_ldisc_ops *ldops)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&tty_ldisc_lock, flags);
+	ldops->refcount--;
+	module_put(ldops->owner);
+	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+}
 
 /**
  *	tty_ldisc_try_get	-	try and reference an ldisc
@@ -156,36 +184,21 @@ EXPORT_SYMBOL(tty_unregister_ldisc);
 
 static struct tty_ldisc *tty_ldisc_try_get(int disc)
 {
-	unsigned long flags;
 	struct tty_ldisc *ld;
 	struct tty_ldisc_ops *ldops;
-	int err = -EINVAL;
 
 	ld = kmalloc(sizeof(struct tty_ldisc), GFP_KERNEL);
 	if (ld == NULL)
 		return ERR_PTR(-ENOMEM);
 
-	spin_lock_irqsave(&tty_ldisc_lock, flags);
-	ld->ops = NULL;
-	ldops = tty_ldiscs[disc];
-	/* Check the entry is defined */
-	if (ldops) {
-		/* If the module is being unloaded we can't use it */
-		if (!try_module_get(ldops->owner))
-			err = -EAGAIN;
-		else {
-			/* lock it */
-			ldops->refcount++;
-			ld->ops = ldops;
-			atomic_set(&ld->users, 1);
-			err = 0;
-		}
-	}
-	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-	if (err) {
+	ldops = get_ldops(disc);
+	if (IS_ERR(ldops)) {
 		kfree(ld);
-		return ERR_PTR(err);
+		return ERR_CAST(ldops);
 	}
+
+	ld->ops = ldops;
+	atomic_set(&ld->users, 1);
 	return ld;
 }
 
@@ -234,13 +247,13 @@ static void tty_ldiscs_seq_stop(struct seq_file *m, void *v)
 static int tty_ldiscs_seq_show(struct seq_file *m, void *v)
 {
 	int i = *(loff_t *)v;
-	struct tty_ldisc *ld;
+	struct tty_ldisc_ops *ldops;
 
-	ld = tty_ldisc_try_get(i);
-	if (IS_ERR(ld))
+	ldops = get_ldops(i);
+	if (IS_ERR(ldops))
 		return 0;
-	seq_printf(m, "%-10s %2d\n", ld->ops->name ? ld->ops->name : "???", i);
-	put_ldisc(ld);
+	seq_printf(m, "%-10s %2d\n", ldops->name ? ldops->name : "???", i);
+	put_ldops(ldops);
 	return 0;
 }
 
Signature · 1 line
1.6.4.2
#5 lore raw

PATCH 5/79 tty-ldisc: get rid of tty_ldisc_try_get() helper function

In reply to Greg KH

From: Linus Torvalds <[email protected]>

Now that the /proc/tty/ldiscs handling doesn't play games with 'struct ldisc' any more, the only remaining user of 'tty_ldisc_try_get()' is 'tty_ldisc_get()' (note the lack of 'try').

And we're actually much better off folding the logic directly into that file, since the 'try' part was always about trying to get the ldisc operations, not the ldisc itself: and making that explicit inside of 'tty_ldisc_get()' clarifies the whole semantics.

---
 drivers/char/tty_ldisc.c |   51 ++++++++++++++++++----------------------------
 1 files changed, 20 insertions(+), 31 deletions(-)
drivers/char/tty_ldisc.c +20 -31
index cbfacc0..aafdbae 100644
@@ -175,34 +175,6 @@ static void put_ldops(struct tty_ldisc_ops *ldops)
 }
 
 /**
- *	tty_ldisc_try_get	-	try and reference an ldisc
- *	@disc: ldisc number
- *
- *	Attempt to open and lock a line discipline into place. Return
- *	the line discipline refcounted or an error.
- */
-
-static struct tty_ldisc *tty_ldisc_try_get(int disc)
-{
-	struct tty_ldisc *ld;
-	struct tty_ldisc_ops *ldops;
-
-	ld = kmalloc(sizeof(struct tty_ldisc), GFP_KERNEL);
-	if (ld == NULL)
-		return ERR_PTR(-ENOMEM);
-
-	ldops = get_ldops(disc);
-	if (IS_ERR(ldops)) {
-		kfree(ld);
-		return ERR_CAST(ldops);
-	}
-
-	ld->ops = ldops;
-	atomic_set(&ld->users, 1);
-	return ld;
-}
-
-/**
  *	tty_ldisc_get		-	take a reference to an ldisc
  *	@disc: ldisc number
  *
@@ -218,14 +190,31 @@ static struct tty_ldisc *tty_ldisc_try_get(int disc)
 static struct tty_ldisc *tty_ldisc_get(int disc)
 {
 	struct tty_ldisc *ld;
+	struct tty_ldisc_ops *ldops;
 
 	if (disc < N_TTY || disc >= NR_LDISCS)
 		return ERR_PTR(-EINVAL);
-	ld = tty_ldisc_try_get(disc);
-	if (IS_ERR(ld)) {
+
+	/*
+	 * Get the ldisc ops - we may need to request them to be loaded
+	 * dynamically and try again.
+	 */
+	ldops = get_ldops(disc);
+	if (IS_ERR(ldops)) {
 		request_module("tty-ldisc-%d", disc);
-		ld = tty_ldisc_try_get(disc);
+		ldops = get_ldops(disc);
+		if (IS_ERR(ldops))
+			return ERR_CAST(ldops);
+	}
+
+	ld = kmalloc(sizeof(struct tty_ldisc), GFP_KERNEL);
+	if (ld == NULL) {
+		put_ldops(ldops);
+		return ERR_PTR(-ENOMEM);
 	}
+
+	ld->ops = ldops;
+	atomic_set(&ld->users, 1);
 	return ld;
 }
 
Signature · 1 line
1.6.4.2
#6 lore raw

PATCH 6/79 tty: includecheck fix: drivers/char, vt.c

In reply to Greg KH

From: Jaswinder Singh Rajput <[email protected]>

fix the following 'make includecheck' warning:

drivers/char/vt.c: linux/device.h is included more than once.

---
 drivers/char/vt.c |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)
drivers/char/vt.c +0 -1
index 6aa88f5..e47a4c8 100644
@@ -2955,7 +2955,6 @@ int __init vty_init(const struct file_operations *console_fops)
 }
 
 #ifndef VT_SINGLE_DRIVER
-#include <linux/device.h>
 
 static struct class *vtconsole_class;
 
Signature · 1 line
1.6.4.2
#7 lore raw

PATCH 7/79 tty: icom: bit and/or confusion?

In reply to Greg KH

From: Roel Kluin <[email protected]>

Previously, if any bit other than CMD_SND_BREAK was set, CMD_SND_BREAK was not unset.

---
 drivers/serial/icom.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/serial/icom.c +1 -1
index cd1b6a4..060f4e3 100644
@@ -617,7 +617,7 @@ static void shutdown(struct icom_port *icom_port)
 	 * disable break condition
 	 */
 	cmdReg = readb(&icom_port->dram->CmdReg);
-	if ((cmdReg | CMD_SND_BREAK) == CMD_SND_BREAK) {
+	if (cmdReg & CMD_SND_BREAK) {
 		writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg);
 	}
 }
Signature · 1 line
1.6.4.2
#8 lore raw

PATCH 8/79 cyclades: add tty refcounting

In reply to Greg KH

From: Jiri Slaby <[email protected]>

While this is not problem for Y card handlers (they are protected by card_lock), Z handlers and other functions may dereference NULL at any point after hangup/close. Even if (tty == NULL) was already performed in the handler.

Note that it's not an issue for Y cards just for now. After switching to tty_port_close_* et al. this will be a problem. So add refcounting to them all.

Also proc .show doesn't take a tty reference and it should (along with a ldisc one).

While at it and changing prototypes (adding tty param), prepend cy_ to functions which don't have it yet.

---
 drivers/char/cyclades.c |  172 +++++++++++++++++++++++++---------------------
 1 files changed, 93 insertions(+), 79 deletions(-)
drivers/char/cyclades.c +93 -79
index 2dafc2d..e2f731b 100644
@@ -850,7 +850,7 @@ MODULE_DEVICE_TABLE(pci, cy_pci_dev_id);
 #endif
 
 static void cy_start(struct tty_struct *);
-static void set_line_char(struct cyclades_port *);
+static void cy_set_line_char(struct cyclades_port *, struct tty_struct *);
 static int cyz_issue_cmd(struct cyclades_card *, __u32, __u8, __u32);
 #ifdef CONFIG_ISA
 static unsigned detect_isa_irq(void __iomem *);
@@ -1011,8 +1011,9 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 	save_car = readb(base_addr + (CyCAR << index));
 	cy_writeb(base_addr + (CyCAR << index), save_xir);
 
+	tty = tty_port_tty_get(&info->port);
 	/* if there is nowhere to put the data, discard it */
-	if (info->port.tty == NULL) {
+	if (tty == NULL) {
 		if ((readb(base_addr + (CyRIVR << index)) & CyIVRMask) ==
 				CyIVRRxEx) {	/* exception */
 			data = readb(base_addr + (CyRDSR << index));
@@ -1024,7 +1025,6 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 		goto end;
 	}
 	/* there is an open port for this data */
-	tty = info->port.tty;
 	if ((readb(base_addr + (CyRIVR << index)) & CyIVRMask) ==
 			CyIVRRxEx) {	/* exception */
 		data = readb(base_addr + (CyRDSR << index));
@@ -1041,6 +1041,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 
 		if (data & info->ignore_status_mask) {
 			info->icount.rx++;
+			tty_kref_put(tty);
 			return;
 		}
 		if (tty_buffer_request_room(tty, 1)) {
@@ -1121,6 +1122,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 		info->idle_stats.recv_idle = jiffies;
 	}
 	tty_schedule_flip(tty);
+	tty_kref_put(tty);
 end:
 	/* end of service */
 	cy_writeb(base_addr + (CyRIR << index), save_xir & 0x3f);
@@ -1131,6 +1133,7 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
 		void __iomem *base_addr)
 {
 	struct cyclades_port *info;
+	struct tty_struct *tty;
 	int char_count, index = cinfo->bus_index;
 	u8 save_xir, channel, save_car, outch;
 
@@ -1154,7 +1157,8 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
 		goto end;
 	}
 	info = &cinfo->ports[channel + chip * 4];
-	if (info->port.tty == NULL) {
+	tty = tty_port_tty_get(&info->port);
+	if (tty == NULL) {
 		cy_writeb(base_addr + (CySRER << index),
 			  readb(base_addr + (CySRER << index)) & ~CyTxRdy);
 		goto end;
@@ -1205,7 +1209,7 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
 					~CyTxRdy);
 			goto done;
 		}
-		if (info->port.tty->stopped || info->port.tty->hw_stopped) {
+		if (tty->stopped || tty->hw_stopped) {
 			cy_writeb(base_addr + (CySRER << index),
 				readb(base_addr + (CySRER << index)) &
 					~CyTxRdy);
@@ -1241,7 +1245,8 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
 	}
 
 done:
-	tty_wakeup(info->port.tty);
+	tty_wakeup(tty);
+	tty_kref_put(tty);
 end:
 	/* end of service */
 	cy_writeb(base_addr + (CyTIR << index), save_xir & 0x3f);
@@ -1252,6 +1257,7 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
 		void __iomem *base_addr)
 {
 	struct cyclades_port *info;
+	struct tty_struct *tty;
 	int index = cinfo->bus_index;
 	u8 save_xir, channel, save_car, mdm_change, mdm_status;
 
@@ -1265,7 +1271,8 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
 	mdm_change = readb(base_addr + (CyMISR << index));
 	mdm_status = readb(base_addr + (CyMSVR1 << index));
 
-	if (!info->port.tty)
+	tty = tty_port_tty_get(&info->port);
+	if (!tty)
 		goto end;
 
 	if (mdm_change & CyANY_DELTA) {
@@ -1284,27 +1291,27 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
 
 	if ((mdm_change & CyDCD) && (info->port.flags & ASYNC_CHECK_CD)) {
 		if (!(mdm_status & CyDCD)) {
-			tty_hangup(info->port.tty);
+			tty_hangup(tty);
 			info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
 		}
 		wake_up_interruptible(&info->port.open_wait);
 	}
 	if ((mdm_change & CyCTS) && (info->port.flags & ASYNC_CTS_FLOW)) {
-		if (info->port.tty->hw_stopped) {
+		if (tty->hw_stopped) {
 			if (mdm_status & CyCTS) {
 				/* cy_start isn't used
 				   because... !!! */
-				info->port.tty->hw_stopped = 0;
+				tty->hw_stopped = 0;
 				cy_writeb(base_addr + (CySRER << index),
 					readb(base_addr + (CySRER << index)) |
 						CyTxRdy);
-				tty_wakeup(info->port.tty);
+				tty_wakeup(tty);
 			}
 		} else {
 			if (!(mdm_status & CyCTS)) {
 				/* cy_stop isn't used
 				   because ... !!! */
-				info->port.tty->hw_stopped = 1;
+				tty->hw_stopped = 1;
 				cy_writeb(base_addr + (CySRER << index),
 					readb(base_addr + (CySRER << index)) &
 						~CyTxRdy);
@@ -1315,6 +1322,7 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
 	}
 	if (mdm_change & CyRI) {
 	}*/
+	tty_kref_put(tty);
 end:
 	/* end of service */
 	cy_writeb(base_addr + (CyMIR << index), save_xir & 0x3f);
@@ -1449,11 +1457,10 @@ cyz_issue_cmd(struct cyclades_card *cinfo,
 	return 0;
 }				/* cyz_issue_cmd */
 
-static void cyz_handle_rx(struct cyclades_port *info,
+static void cyz_handle_rx(struct cyclades_port *info, struct tty_struct *tty,
 		struct BUF_CTRL __iomem *buf_ctrl)
 {
 	struct cyclades_card *cinfo = info->card;
-	struct tty_struct *tty = info->port.tty;
 	unsigned int char_count;
 	int len;
 #ifdef BLOCKMOVE
@@ -1542,11 +1549,10 @@ static void cyz_handle_rx(struct cyclades_port *info,
 	}
 }
 
-static void cyz_handle_tx(struct cyclades_port *info,
+static void cyz_handle_tx(struct cyclades_port *info, struct tty_struct *tty,
 		struct BUF_CTRL __iomem *buf_ctrl)
 {
 	struct cyclades_card *cinfo = info->card;
-	struct tty_struct *tty = info->port.tty;
 	u8 data;
 	unsigned int char_count;
 #ifdef BLOCKMOVE
@@ -1642,7 +1648,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 		special_count = 0;
 		delta_count = 0;
 		info = &cinfo->ports[channel];
-		tty = info->port.tty;
+		tty = tty_port_tty_get(&info->port);
 		if (tty == NULL)
 			continue;
 
@@ -1674,7 +1680,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 						C_RS_DCD) {
 					wake_up_interruptible(&info->port.open_wait);
 				} else {
-					tty_hangup(info->port.tty);
+					tty_hangup(tty);
 					wake_up_interruptible(&info->port.open_wait);
 					info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
 				}
@@ -1706,7 +1712,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 			printk(KERN_DEBUG "cyz_interrupt: rcvd intr, card %d, "
 					"port %ld\n", info->card, channel);
 #endif
-			cyz_handle_rx(info, buf_ctrl);
+			cyz_handle_rx(info, tty, buf_ctrl);
 			break;
 		case C_CM_TXBEMPTY:
 		case C_CM_TXLOWWM:
@@ -1716,7 +1722,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 			printk(KERN_DEBUG "cyz_interrupt: xmit intr, card %d, "
 					"port %ld\n", info->card, channel);
 #endif
-			cyz_handle_tx(info, buf_ctrl);
+			cyz_handle_tx(info, tty, buf_ctrl);
 			break;
 #endif				/* CONFIG_CYZ_INTR */
 		case C_CM_FATAL:
@@ -1729,6 +1735,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 			wake_up_interruptible(&info->delta_msr_wait);
 		if (special_count)
 			tty_schedule_flip(tty);
+		tty_kref_put(tty);
 	}
 }
 
@@ -1774,7 +1781,6 @@ static void cyz_poll(unsigned long arg)
 {
 	struct cyclades_card *cinfo;
 	struct cyclades_port *info;
-	struct tty_struct *tty;
 	struct FIRM_ID __iomem *firm_id;
 	struct ZFW_CTRL __iomem *zfw_ctrl;
 	struct BUF_CTRL __iomem *buf_ctrl;
@@ -1802,13 +1808,19 @@ static void cyz_poll(unsigned long arg)
 		cyz_handle_cmd(cinfo);
 
 		for (port = 0; port < cinfo->nports; port++) {
+			struct tty_struct *tty;
+
 			info = &cinfo->ports[port];
-			tty = info->port.tty;
 			buf_ctrl = &(zfw_ctrl->buf_ctrl[port]);
 
+			tty = tty_port_tty_get(&info->port);
+			/* OK to pass NULL to the handle functions below.
+			   They need to drop the data in that case. */
+
 			if (!info->throttle)
-				cyz_handle_rx(info, buf_ctrl);
-			cyz_handle_tx(info, buf_ctrl);
+				cyz_handle_rx(info, tty, buf_ctrl);
+			cyz_handle_tx(info, tty, buf_ctrl);
+			tty_kref_put(tty);
 		}
 		/* poll every 'cyz_polling_cycle' period */
 		expires = jiffies + cyz_polling_cycle;
@@ -1824,7 +1836,7 @@ static void cyz_poll(unsigned long arg)
 /* This is called whenever a port becomes active;
    interrupts are enabled and DTR & RTS are turned on.
  */
-static int startup(struct cyclades_port *info)
+static int cy_startup(struct cyclades_port *info, struct tty_struct *tty)
 {
 	struct cyclades_card *card;
 	unsigned long flags;
@@ -1848,8 +1860,7 @@ static int startup(struct cyclades_port *info)
 	}
 
 	if (!info->type) {
-		if (info->port.tty)
-			set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		set_bit(TTY_IO_ERROR, &tty->flags);
 		free_page(page);
 		goto errout;
 	}
@@ -1861,7 +1872,7 @@ static int startup(struct cyclades_port *info)
 
 	spin_unlock_irqrestore(&card->card_lock, flags);
 
-	set_line_char(info);
+	cy_set_line_char(info, tty);
 
 	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
@@ -1900,8 +1911,7 @@ static int startup(struct cyclades_port *info)
 			readb(base_addr + (CySRER << index)) | CyRxData);
 		info->port.flags |= ASYNC_INITIALIZED;
 
-		if (info->port.tty)
-			clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		clear_bit(TTY_IO_ERROR, &tty->flags);
 		info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
 		info->breakon = info->breakoff = 0;
 		memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
@@ -1984,8 +1994,7 @@ static int startup(struct cyclades_port *info)
 		/* enable send, recv, modem !!! */
 
 		info->port.flags |= ASYNC_INITIALIZED;
-		if (info->port.tty)
-			clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		clear_bit(TTY_IO_ERROR, &tty->flags);
 		info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
 		info->breakon = info->breakoff = 0;
 		memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
@@ -2047,7 +2056,7 @@ static void start_xmit(struct cyclades_port *info)
  * This routine shuts down a serial port; interrupts are disabled,
  * and DTR is dropped if the hangup on close termio flag is on.
  */
-static void shutdown(struct cyclades_port *info)
+static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
 {
 	struct cyclades_card *card;
 	unsigned long flags;
@@ -2083,7 +2092,7 @@ static void shutdown(struct cyclades_port *info)
 			free_page((unsigned long)temp);
 		}
 		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
-		if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
+		if (tty->termios->c_cflag & HUPCL) {
 			cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS);
 			cy_writeb(base_addr + (CyMSVR2 << index), ~CyDTR);
 #ifdef CY_DEBUG_DTR
@@ -2097,8 +2106,7 @@ static void shutdown(struct cyclades_port *info)
 		/* it may be appropriate to clear _XMIT at
 		   some later date (after testing)!!! */
 
-		if (info->port.tty)
-			set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		set_bit(TTY_IO_ERROR, &tty->flags);
 		info->port.flags &= ~ASYNC_INITIALIZED;
 		spin_unlock_irqrestore(&card->card_lock, flags);
 	} else {
@@ -2132,7 +2140,7 @@ static void shutdown(struct cyclades_port *info)
 			free_page((unsigned long)temp);
 		}
 
-		if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
+		if (tty->termios->c_cflag & HUPCL) {
 			cy_writel(&ch_ctrl[channel].rs_control,
 				(__u32)(readl(&ch_ctrl[channel].rs_control) &
 					~(C_RS_RTS | C_RS_DTR)));
@@ -2147,8 +2155,7 @@ static void shutdown(struct cyclades_port *info)
 #endif
 		}
 
-		if (info->port.tty)
-			set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		set_bit(TTY_IO_ERROR, &tty->flags);
 		info->port.flags &= ~ASYNC_INITIALIZED;
 
 		spin_unlock_irqrestore(&card->card_lock, flags);
@@ -2436,7 +2443,6 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
 	printk(KERN_DEBUG "cyc:cy_open ttyC%d\n", info->line);
 #endif
 	tty->driver_data = info;
-	info->port.tty = tty;
 	if (serial_paranoia_check(info, tty->name, "cy_open"))
 		return -ENODEV;
 
@@ -2462,7 +2468,7 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
 	/*
 	 * Start up serial port
 	 */
-	retval = startup(info);
+	retval = cy_startup(info, tty);
 	if (retval)
 		return retval;
 
@@ -2476,6 +2482,7 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
 	}
 
 	info->throttle = 0;
+	tty_port_tty_set(&info->port, tty);
 
 #ifdef CY_DEBUG_OPEN
 	printk(KERN_DEBUG "cyc:cy_open done\n");
@@ -2705,13 +2712,13 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
 	}
 
 	spin_unlock_irqrestore(&card->card_lock, flags);
-	shutdown(info);
+	cy_shutdown(info, tty);
 	cy_flush_buffer(tty);
 	tty_ldisc_flush(tty);
 	spin_lock_irqsave(&card->card_lock, flags);
 
 	tty->closing = 0;
-	info->port.tty = NULL;
+	tty_port_tty_set(&info->port, NULL);
 	if (info->port.blocked_open) {
 		spin_unlock_irqrestore(&card->card_lock, flags);
 		if (info->port.close_delay) {
@@ -2957,7 +2964,7 @@ static void cyy_baud_calc(struct cyclades_port *info, __u32 baud)
  * This routine finds or computes the various line characteristics.
  * It used to be called config_setup
  */
-static void set_line_char(struct cyclades_port *info)
+static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty)
 {
 	struct cyclades_card *card;
 	unsigned long flags;
@@ -2967,28 +2974,26 @@ static void set_line_char(struct cyclades_port *info)
 	int baud, baud_rate = 0;
 	int i;
 
-	if (!info->port.tty || !info->port.tty->termios)
+	if (!tty->termios) /* XXX can this happen at all? */
 		return;
 
 	if (info->line == -1)
 		return;
 
-	cflag = info->port.tty->termios->c_cflag;
-	iflag = info->port.tty->termios->c_iflag;
+	cflag = tty->termios->c_cflag;
+	iflag = tty->termios->c_iflag;
 
 	/*
 	 * Set up the tty->alt_speed kludge
 	 */
-	if (info->port.tty) {
-		if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-			info->port.tty->alt_speed = 57600;
-		if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-			info->port.tty->alt_speed = 115200;
-		if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-			info->port.tty->alt_speed = 230400;
-		if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-			info->port.tty->alt_speed = 460800;
-	}
+	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+		tty->alt_speed = 57600;
+	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+		tty->alt_speed = 115200;
+	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+		tty->alt_speed = 230400;
+	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+		tty->alt_speed = 460800;
 
 	card = info->card;
 	channel = info->line - card->first_line;
@@ -2998,7 +3003,7 @@ static void set_line_char(struct cyclades_port *info)
 		index = card->bus_index;
 
 		/* baud rate */
-		baud = tty_get_baud_rate(info->port.tty);
+		baud = tty_get_baud_rate(tty);
 		if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
 				ASYNC_SPD_CUST) {
 			if (info->custom_divisor)
@@ -3123,9 +3128,8 @@ static void set_line_char(struct cyclades_port *info)
 
 		/* set line characteristics  according configuration */
 
-		cy_writeb(base_addr + (CySCHR1 << index),
-			  START_CHAR(info->port.tty));
-		cy_writeb(base_addr + (CySCHR2 << index), STOP_CHAR(info->port.tty));
+		cy_writeb(base_addr + (CySCHR1 << index), START_CHAR(tty));
+		cy_writeb(base_addr + (CySCHR2 << index), STOP_CHAR(tty));
 		cy_writeb(base_addr + (CyCOR1 << index), info->cor1);
 		cy_writeb(base_addr + (CyCOR2 << index), info->cor2);
 		cy_writeb(base_addr + (CyCOR3 << index), info->cor3);
@@ -3141,7 +3145,7 @@ static void set_line_char(struct cyclades_port *info)
 			(info->default_timeout ? info->default_timeout : 0x02));
 		/* 10ms rx timeout */
 
-		if (C_CLOCAL(info->port.tty)) {
+		if (C_CLOCAL(tty)) {
 			/* without modem intr */
 			cy_writeb(base_addr + (CySRER << index),
 				readb(base_addr + (CySRER << index)) | CyMdmCh);
@@ -3204,8 +3208,7 @@ static void set_line_char(struct cyclades_port *info)
 #endif
 		}
 
-		if (info->port.tty)
-			clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		clear_bit(TTY_IO_ERROR, &tty->flags);
 		spin_unlock_irqrestore(&card->card_lock, flags);
 
 	} else {
@@ -3224,7 +3227,7 @@ static void set_line_char(struct cyclades_port *info)
 		ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
 
 		/* baud rate */
-		baud = tty_get_baud_rate(info->port.tty);
+		baud = tty_get_baud_rate(tty);
 		if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
 				ASYNC_SPD_CUST) {
 			if (info->custom_divisor)
@@ -3335,8 +3338,7 @@ static void set_line_char(struct cyclades_port *info)
 				"was %x\n", info->line, retval);
 		}
 
-		if (info->port.tty)
-			clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		clear_bit(TTY_IO_ERROR, &tty->flags);
 	}
 }				/* set_line_char */
 
@@ -3365,7 +3367,7 @@ get_serial_info(struct cyclades_port *info,
 }				/* get_serial_info */
 
 static int
-set_serial_info(struct cyclades_port *info,
+cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty,
 		struct serial_struct __user *new_info)
 {
 	struct serial_struct new_serial;
@@ -3403,10 +3405,10 @@ set_serial_info(struct cyclades_port *info,
 
 check_and_exit:
 	if (info->port.flags & ASYNC_INITIALIZED) {
-		set_line_char(info);
+		cy_set_line_char(info, tty);
 		return 0;
 	} else {
-		return startup(info);
+		return cy_startup(info, tty);
 	}
 }				/* set_serial_info */
 
@@ -3955,7 +3957,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 		ret_val = get_serial_info(info, argp);
 		break;
 	case TIOCSSERIAL:
-		ret_val = set_serial_info(info, argp);
+		ret_val = cy_set_serial_info(info, tty, argp);
 		break;
 	case TIOCSERGETLSR:	/* Get line status register */
 		ret_val = get_lsr_info(info, argp);
@@ -4055,7 +4057,7 @@ static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 	printk(KERN_DEBUG "cyc:cy_set_termios ttyC%d\n", info->line);
 #endif
 
-	set_line_char(info);
+	cy_set_line_char(info, tty);
 
 	if ((old_termios->c_cflag & CRTSCTS) &&
 			!(tty->termios->c_cflag & CRTSCTS)) {
@@ -4299,13 +4301,13 @@ static void cy_hangup(struct tty_struct *tty)
 		return;
 
 	cy_flush_buffer(tty);
-	shutdown(info);
+	cy_shutdown(info, tty);
 	info->port.count = 0;
 #ifdef CY_DEBUG_COUNT
 	printk(KERN_DEBUG "cyc:cy_hangup (%d): setting count to 0\n",
 		current->pid);
 #endif
-	info->port.tty = NULL;
+	tty_port_tty_set(&info->port, NULL);
 	info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
 	wake_up_interruptible(&info->port.open_wait);
 }				/* cy_hangup */
@@ -5191,18 +5193,30 @@ static int cyclades_proc_show(struct seq_file *m, void *v)
 		for (j = 0; j < cy_card[i].nports; j++) {
 			info = &cy_card[i].ports[j];
 
-			if (info->port.count)
+			if (info->port.count) {
+				/* XXX is the ldisc num worth this? */
+				struct tty_struct *tty;
+				struct tty_ldisc *ld;
+				int num = 0;
+				tty = tty_port_tty_get(&info->port);
+				if (tty) {
+					ld = tty_ldisc_ref(tty);
+					if (ld) {
+						num = ld->ops->num;
+						tty_ldisc_deref(ld);
+					}
+					tty_kref_put(tty);
+				}
 				seq_printf(m, "%3d %8lu %10lu %8lu "
-					"%10lu %8lu %9lu %6ld\n", info->line,
+					"%10lu %8lu %9lu %6d\n", info->line,
 					(cur_jifs - info->idle_stats.in_use) /
 					HZ, info->idle_stats.xmit_bytes,
 					(cur_jifs - info->idle_stats.xmit_idle)/
 					HZ, info->idle_stats.recv_bytes,
 					(cur_jifs - info->idle_stats.recv_idle)/
 					HZ, info->idle_stats.overruns,
-					/* FIXME: double check locking */
-					(long)info->port.tty->ldisc->ops->num);
-			else
+					num);
+			} else
 				seq_printf(m, "%3d %8lu %10lu %8lu "
 					"%10lu %8lu %9lu %6ld\n",
 					info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L);
Signature · 1 line
1.6.4.2
#9 lore raw

PATCH 9/79 cyclades: remove block_til_ready

In reply to Greg KH

From: Jiri Slaby <[email protected]>

Use a tty_port common instead. This saves lots of .text and makes the code a lot more readable.

This involves separation of a dtr_rts handling, next patches will use that to not duplicate the code all over the place.

---
 drivers/char/cyclades.c |  302 +++++++++++++++++------------------------------
 1 files changed, 108 insertions(+), 194 deletions(-)
drivers/char/cyclades.c +108 -194
index e2f731b..9e0cd70 100644
@@ -2172,199 +2172,6 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
  * ------------------------------------------------------------
  */
 
-static int
-block_til_ready(struct tty_struct *tty, struct file *filp,
-		struct cyclades_port *info)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	struct cyclades_card *cinfo;
-	unsigned long flags;
-	int chip, channel, index;
-	int retval;
-	void __iomem *base_addr;
-
-	cinfo = info->card;
-	channel = info->line - cinfo->first_line;
-
-	/*
-	 * If the device is in the middle of being closed, then block
-	 * until it's done, and then try again.
-	 */
-	if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) {
-		wait_event_interruptible(info->port.close_wait,
-				!(info->port.flags & ASYNC_CLOSING));
-		return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
-	}
-
-	/*
-	 * If non-blocking mode is set, then make the check up front
-	 * and then exit.
-	 */
-	if ((filp->f_flags & O_NONBLOCK) ||
-					(tty->flags & (1 << TTY_IO_ERROR))) {
-		info->port.flags |= ASYNC_NORMAL_ACTIVE;
-		return 0;
-	}
-
-	/*
-	 * Block waiting for the carrier detect and the line to become
-	 * free (i.e., not in use by the callout).  While we are in
-	 * this loop, info->port.count is dropped by one, so that
-	 * cy_close() knows when to free things.  We restore it upon
-	 * exit, either normal or abnormal.
-	 */
-	retval = 0;
-	add_wait_queue(&info->port.open_wait, &wait);
-#ifdef CY_DEBUG_OPEN
-	printk(KERN_DEBUG "cyc block_til_ready before block: ttyC%d, "
-		"count = %d\n", info->line, info->port.count);
-#endif
-	spin_lock_irqsave(&cinfo->card_lock, flags);
-	if (!tty_hung_up_p(filp))
-		info->port.count--;
-	spin_unlock_irqrestore(&cinfo->card_lock, flags);
-#ifdef CY_DEBUG_COUNT
-	printk(KERN_DEBUG "cyc block_til_ready: (%d): decrementing count to "
-		"%d\n", current->pid, info->port.count);
-#endif
-	info->port.blocked_open++;
-
-	if (!cy_is_Z(cinfo)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = cinfo->bus_index;
-		base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index);
-
-		while (1) {
-			spin_lock_irqsave(&cinfo->card_lock, flags);
-			if ((tty->termios->c_cflag & CBAUD)) {
-				cy_writeb(base_addr + (CyCAR << index),
-					  (u_char) channel);
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  CyRTS);
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  CyDTR);
-#ifdef CY_DEBUG_DTR
-				printk(KERN_DEBUG "cyc:block_til_ready raising "
-					"DTR\n");
-				printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-					readb(base_addr + (CyMSVR1 << index)),
-					readb(base_addr + (CyMSVR2 << index)));
-#endif
-			}
-			spin_unlock_irqrestore(&cinfo->card_lock, flags);
-
-			set_current_state(TASK_INTERRUPTIBLE);
-			if (tty_hung_up_p(filp) ||
-					!(info->port.flags & ASYNC_INITIALIZED)) {
-				retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
-					  -EAGAIN : -ERESTARTSYS);
-				break;
-			}
-
-			spin_lock_irqsave(&cinfo->card_lock, flags);
-			cy_writeb(base_addr + (CyCAR << index),
-				  (u_char) channel);
-			if (!(info->port.flags & ASYNC_CLOSING) && (C_CLOCAL(tty) ||
-					(readb(base_addr +
-						(CyMSVR1 << index)) & CyDCD))) {
-				spin_unlock_irqrestore(&cinfo->card_lock, flags);
-				break;
-			}
-			spin_unlock_irqrestore(&cinfo->card_lock, flags);
-
-			if (signal_pending(current)) {
-				retval = -ERESTARTSYS;
-				break;
-			}
-#ifdef CY_DEBUG_OPEN
-			printk(KERN_DEBUG "cyc block_til_ready blocking: "
-				"ttyC%d, count = %d\n",
-				info->line, info->port.count);
-#endif
-			schedule();
-		}
-	} else {
-		struct FIRM_ID __iomem *firm_id;
-		struct ZFW_CTRL __iomem *zfw_ctrl;
-		struct BOARD_CTRL __iomem *board_ctrl;
-		struct CH_CTRL __iomem *ch_ctrl;
-
-		base_addr = cinfo->base_addr;
-		firm_id = base_addr + ID_ADDRESS;
-		if (!cyz_is_loaded(cinfo)) {
-			__set_current_state(TASK_RUNNING);
-			remove_wait_queue(&info->port.open_wait, &wait);
-			return -EINVAL;
-		}
-
-		zfw_ctrl = base_addr + (readl(&firm_id->zfwctrl_addr)
-								& 0xfffff);
-		board_ctrl = &zfw_ctrl->board_ctrl;
-		ch_ctrl = zfw_ctrl->ch_ctrl;
-
-		while (1) {
-			if ((tty->termios->c_cflag & CBAUD)) {
-				cy_writel(&ch_ctrl[channel].rs_control,
-					readl(&ch_ctrl[channel].rs_control) |
-					C_RS_RTS | C_RS_DTR);
-				retval = cyz_issue_cmd(cinfo,
-					channel, C_CM_IOCTLM, 0L);
-				if (retval != 0) {
-					printk(KERN_ERR "cyc:block_til_ready "
-						"retval on ttyC%d was %x\n",
-						info->line, retval);
-				}
-#ifdef CY_DEBUG_DTR
-				printk(KERN_DEBUG "cyc:block_til_ready raising "
-					"Z DTR\n");
-#endif
-			}
-
-			set_current_state(TASK_INTERRUPTIBLE);
-			if (tty_hung_up_p(filp) ||
-					!(info->port.flags & ASYNC_INITIALIZED)) {
-				retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
-					  -EAGAIN : -ERESTARTSYS);
-				break;
-			}
-			if (!(info->port.flags & ASYNC_CLOSING) && (C_CLOCAL(tty) ||
-					(readl(&ch_ctrl[channel].rs_status) &
-						C_RS_DCD))) {
-				break;
-			}
-			if (signal_pending(current)) {
-				retval = -ERESTARTSYS;
-				break;
-			}
-#ifdef CY_DEBUG_OPEN
-			printk(KERN_DEBUG "cyc block_til_ready blocking: "
-				"ttyC%d, count = %d\n",
-				info->line, info->port.count);
-#endif
-			schedule();
-		}
-	}
-	__set_current_state(TASK_RUNNING);
-	remove_wait_queue(&info->port.open_wait, &wait);
-	if (!tty_hung_up_p(filp)) {
-		info->port.count++;
-#ifdef CY_DEBUG_COUNT
-		printk(KERN_DEBUG "cyc:block_til_ready (%d): incrementing "
-			"count to %d\n", current->pid, info->port.count);
-#endif
-	}
-	info->port.blocked_open--;
-#ifdef CY_DEBUG_OPEN
-	printk(KERN_DEBUG "cyc:block_til_ready after blocking: ttyC%d, "
-		"count = %d\n", info->line, info->port.count);
-#endif
-	if (retval)
-		return retval;
-	info->port.flags |= ASYNC_NORMAL_ACTIVE;
-	return 0;
-}				/* block_til_ready */
-
 /*
  * This routine is called whenever a serial port is opened.  It
  * performs the serial-specific initialization for the tty structure.
@@ -2472,7 +2279,7 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
 	if (retval)
 		return retval;
 
-	retval = block_til_ready(tty, filp, info);
+	retval = tty_port_block_til_ready(&info->port, tty, filp);
 	if (retval) {
 #ifdef CY_DEBUG_OPEN
 		printk(KERN_DEBUG "cyc:cy_open returning after block_til_ready "
@@ -4312,6 +4119,111 @@ static void cy_hangup(struct tty_struct *tty)
 	wake_up_interruptible(&info->port.open_wait);
 }				/* cy_hangup */
 
+static int cyy_carrier_raised(struct tty_port *port)
+{
+	struct cyclades_port *info = container_of(port, struct cyclades_port,
+			port);
+	struct cyclades_card *cinfo = info->card;
+	void __iomem *base = cinfo->base_addr;
+	unsigned long flags;
+	int channel = info->line - cinfo->first_line;
+	int chip = channel >> 2, index = cinfo->bus_index;
+	u32 cd;
+
+	channel &= 0x03;
+	base += cy_chip_offset[chip] << index;
+
+	spin_lock_irqsave(&cinfo->card_lock, flags);
+	cy_writeb(base + (CyCAR << index), (u8)channel);
+	cd = readb(base + (CyMSVR1 << index)) & CyDCD;
+	spin_unlock_irqrestore(&cinfo->card_lock, flags);
+
+	return cd;
+}
+
+static void cyy_dtr_rts(struct tty_port *port, int raise)
+{
+	struct cyclades_port *info = container_of(port, struct cyclades_port,
+			port);
+	struct cyclades_card *cinfo = info->card;
+	void __iomem *base = cinfo->base_addr;
+	unsigned long flags;
+	int channel = info->line - cinfo->first_line;
+	int chip = channel >> 2, index = cinfo->bus_index;
+
+	channel &= 0x03;
+	base += cy_chip_offset[chip] << index;
+
+	spin_lock_irqsave(&cinfo->card_lock, flags);
+	cy_writeb(base + (CyCAR << index), (u8)channel);
+	cy_writeb(base + (CyMSVR1 << index), raise ? CyRTS : ~CyRTS);
+	cy_writeb(base + (CyMSVR2 << index), raise ? CyDTR : ~CyDTR);
+#ifdef CY_DEBUG_DTR
+	printk(KERN_DEBUG "%s: raising DTR\n", __func__);
+	printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
+			readb(base + (CyMSVR1 << index)),
+			readb(base + (CyMSVR2 << index)));
+#endif
+	spin_unlock_irqrestore(&cinfo->card_lock, flags);
+}
+
+static int cyz_carrier_raised(struct tty_port *port)
+{
+	struct cyclades_port *info = container_of(port, struct cyclades_port,
+			port);
+	struct cyclades_card *cinfo = info->card;
+	void __iomem *base = cinfo->base_addr;
+	struct FIRM_ID __iomem *firm_id = base + ID_ADDRESS;
+	struct ZFW_CTRL __iomem *zfw_ctrl;
+	struct CH_CTRL __iomem *ch_ctrl;
+	int channel = info->line - cinfo->first_line;
+
+	zfw_ctrl = base + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
+	ch_ctrl = zfw_ctrl->ch_ctrl;
+
+	return readl(&ch_ctrl[channel].rs_status) & C_RS_DCD;
+}
+
+static void cyz_dtr_rts(struct tty_port *port, int raise)
+{
+	struct cyclades_port *info = container_of(port, struct cyclades_port,
+			port);
+	struct cyclades_card *cinfo = info->card;
+	void __iomem *base = cinfo->base_addr;
+	struct FIRM_ID __iomem *firm_id = base + ID_ADDRESS;
+	struct ZFW_CTRL __iomem *zfw_ctrl;
+	struct CH_CTRL __iomem *ch_ctrl;
+	int ret, channel = info->line - cinfo->first_line;
+	u32 rs;
+
+	zfw_ctrl = base + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
+	ch_ctrl = zfw_ctrl->ch_ctrl;
+
+	rs = readl(&ch_ctrl[channel].rs_control);
+	if (raise)
+		rs |= C_RS_RTS | C_RS_DTR;
+	else
+		rs &= ~(C_RS_RTS | C_RS_DTR);
+	cy_writel(&ch_ctrl[channel].rs_control, rs);
+	ret = cyz_issue_cmd(cinfo, channel, C_CM_IOCTLM, 0L);
+	if (ret != 0)
+		printk(KERN_ERR "%s: retval on ttyC%d was %x\n",
+				__func__, info->line, ret);
+#ifdef CY_DEBUG_DTR
+	printk(KERN_DEBUG "%s: raising Z DTR\n", __func__);
+#endif
+}
+
+static const struct tty_port_operations cyy_port_ops = {
+	.carrier_raised = cyy_carrier_raised,
+	.dtr_rts = cyy_dtr_rts,
+};
+
+static const struct tty_port_operations cyz_port_ops = {
+	.carrier_raised = cyz_carrier_raised,
+	.dtr_rts = cyz_dtr_rts,
+};
+
 /*
  * ---------------------------------------------------------------------
  * cy_init() and friends
@@ -4351,6 +4263,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
 		init_waitqueue_head(&info->delta_msr_wait);
 
 		if (cy_is_Z(cinfo)) {
+			info->port.ops = &cyz_port_ops;
 			info->type = PORT_STARTECH;
 			if (cinfo->hw_ver == ZO_V1)
 				info->xmit_fifo_size = CYZ_FIFO_SIZE;
@@ -4362,6 +4275,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
 #endif
 		} else {
 			int index = cinfo->bus_index;
+			info->port.ops = &cyy_port_ops;
 			info->type = PORT_CIRRUS;
 			info->xmit_fifo_size = CyMAX_CHAR_FIFO;
 			info->cor1 = CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS;
Signature · 1 line
1.6.4.2
#10 lore raw

PATCH 10/79 cyclades: avoid addresses recomputation

In reply to Greg KH

From: Jiri Slaby <[email protected]>

Don't fetch firmware address and recompute channel control on each port access. Precompute the values on init and use them later all the time.

The same for board control.

This simplify code and improves readability.

---
 drivers/char/cyclades.c  |  241 ++++++++++++++--------------------------------
 include/linux/cyclades.h |   10 ++
 2 files changed, 81 insertions(+), 170 deletions(-)
drivers/char/cyclades.c +71 -170
index 9e0cd70..7a7092a 100644
@@ -814,7 +814,7 @@ static char rflow_thr[] = {	/* rflow threshold */
 /*  The Cyclom-Ye has placed the sequential chips in non-sequential
  *  address order.  This look-up table overcomes that problem.
  */
-static int cy_chip_offset[] = { 0x0000,
+static const unsigned int cy_chip_offset[] = { 0x0000,
 	0x0400,
 	0x0800,
 	0x0C00,
@@ -1406,15 +1406,9 @@ static int
 cyz_fetch_msg(struct cyclades_card *cinfo,
 		__u32 *channel, __u8 *cmd, __u32 *param)
 {
-	struct FIRM_ID __iomem *firm_id;
-	struct ZFW_CTRL __iomem *zfw_ctrl;
-	struct BOARD_CTRL __iomem *board_ctrl;
+	struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl;
 	unsigned long loc_doorbell;
 
-	firm_id = cinfo->base_addr + ID_ADDRESS;
-	zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
-	board_ctrl = &zfw_ctrl->board_ctrl;
-
 	loc_doorbell = readl(&cinfo->ctl_addr.p9060->loc_doorbell);
 	if (loc_doorbell) {
 		*cmd = (char)(0xff & loc_doorbell);
@@ -1430,19 +1424,13 @@ static int
 cyz_issue_cmd(struct cyclades_card *cinfo,
 		__u32 channel, __u8 cmd, __u32 param)
 {
-	struct FIRM_ID __iomem *firm_id;
-	struct ZFW_CTRL __iomem *zfw_ctrl;
-	struct BOARD_CTRL __iomem *board_ctrl;
+	struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl;
 	__u32 __iomem *pci_doorbell;
 	unsigned int index;
 
-	firm_id = cinfo->base_addr + ID_ADDRESS;
 	if (!cyz_is_loaded(cinfo))
 		return -1;
 
-	zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
-	board_ctrl = &zfw_ctrl->board_ctrl;
-
 	index = 0;
 	pci_doorbell = &cinfo->ctl_addr.p9060->pci_doorbell;
 	while ((readl(pci_doorbell) & 0xff) != 0) {
@@ -1457,9 +1445,9 @@ cyz_issue_cmd(struct cyclades_card *cinfo,
 	return 0;
 }				/* cyz_issue_cmd */
 
-static void cyz_handle_rx(struct cyclades_port *info, struct tty_struct *tty,
-		struct BUF_CTRL __iomem *buf_ctrl)
+static void cyz_handle_rx(struct cyclades_port *info, struct tty_struct *tty)
 {
+	struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl;
 	struct cyclades_card *cinfo = info->card;
 	unsigned int char_count;
 	int len;
@@ -1549,9 +1537,9 @@ static void cyz_handle_rx(struct cyclades_port *info, struct tty_struct *tty,
 	}
 }
 
-static void cyz_handle_tx(struct cyclades_port *info, struct tty_struct *tty,
-		struct BUF_CTRL __iomem *buf_ctrl)
+static void cyz_handle_tx(struct cyclades_port *info, struct tty_struct *tty)
 {
+	struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl;
 	struct cyclades_card *cinfo = info->card;
 	u8 data;
 	unsigned int char_count;
@@ -1627,21 +1615,14 @@ ztxdone:
 
 static void cyz_handle_cmd(struct cyclades_card *cinfo)
 {
+	struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl;
 	struct tty_struct *tty;
 	struct cyclades_port *info;
-	static struct FIRM_ID __iomem *firm_id;
-	static struct ZFW_CTRL __iomem *zfw_ctrl;
-	static struct BOARD_CTRL __iomem *board_ctrl;
-	static struct CH_CTRL __iomem *ch_ctrl;
-	static struct BUF_CTRL __iomem *buf_ctrl;
 	__u32 channel, param, fw_ver;
 	__u8 cmd;
 	int special_count;
 	int delta_count;
 
-	firm_id = cinfo->base_addr + ID_ADDRESS;
-	zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
-	board_ctrl = &zfw_ctrl->board_ctrl;
 	fw_ver = readl(&board_ctrl->fw_version);
 
 	while (cyz_fetch_msg(cinfo, &channel, &cmd, &param) == 1) {
@@ -1652,9 +1633,6 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 		if (tty == NULL)
 			continue;
 
-		ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
-		buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]);
-
 		switch (cmd) {
 		case C_CM_PR_ERROR:
 			tty_insert_flip_char(tty, 0, TTY_PARITY);
@@ -1675,9 +1653,9 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 			info->icount.dcd++;
 			delta_count++;
 			if (info->port.flags & ASYNC_CHECK_CD) {
-				if ((fw_ver > 241 ? ((u_long) param) :
-						readl(&ch_ctrl->rs_status)) &
-						C_RS_DCD) {
+				u32 dcd = fw_ver > 241 ? param :
+					readl(&info->u.cyz.ch_ctrl->rs_status);
+				if (dcd & C_RS_DCD) {
 					wake_up_interruptible(&info->port.open_wait);
 				} else {
 					tty_hangup(tty);
@@ -1712,7 +1690,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 			printk(KERN_DEBUG "cyz_interrupt: rcvd intr, card %d, "
 					"port %ld\n", info->card, channel);
 #endif
-			cyz_handle_rx(info, tty, buf_ctrl);
+			cyz_handle_rx(info, tty);
 			break;
 		case C_CM_TXBEMPTY:
 		case C_CM_TXLOWWM:
@@ -1722,7 +1700,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 			printk(KERN_DEBUG "cyz_interrupt: xmit intr, card %d, "
 					"port %ld\n", info->card, channel);
 #endif
-			cyz_handle_tx(info, tty, buf_ctrl);
+			cyz_handle_tx(info, tty);
 			break;
 #endif				/* CONFIG_CYZ_INTR */
 		case C_CM_FATAL:
@@ -1781,9 +1759,6 @@ static void cyz_poll(unsigned long arg)
 {
 	struct cyclades_card *cinfo;
 	struct cyclades_port *info;
-	struct FIRM_ID __iomem *firm_id;
-	struct ZFW_CTRL __iomem *zfw_ctrl;
-	struct BUF_CTRL __iomem *buf_ctrl;
 	unsigned long expires = jiffies + HZ;
 	unsigned int port, card;
 
@@ -1795,10 +1770,6 @@ static void cyz_poll(unsigned long arg)
 		if (!cyz_is_loaded(cinfo))
 			continue;
 
-		firm_id = cinfo->base_addr + ID_ADDRESS;
-		zfw_ctrl = cinfo->base_addr +
-				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-
 	/* Skip first polling cycle to avoid racing conditions with the FW */
 		if (!cinfo->intr_enabled) {
 			cinfo->intr_enabled = 1;
@@ -1811,15 +1782,13 @@ static void cyz_poll(unsigned long arg)
 			struct tty_struct *tty;
 
 			info = &cinfo->ports[port];
-			buf_ctrl = &(zfw_ctrl->buf_ctrl[port]);
-
 			tty = tty_port_tty_get(&info->port);
 			/* OK to pass NULL to the handle functions below.
 			   They need to drop the data in that case. */
 
 			if (!info->throttle)
-				cyz_handle_rx(info, tty, buf_ctrl);
-			cyz_handle_tx(info, tty, buf_ctrl);
+				cyz_handle_rx(info, tty);
+			cyz_handle_tx(info, tty);
 			tty_kref_put(tty);
 		}
 		/* poll every 'cyz_polling_cycle' period */
@@ -1922,45 +1891,34 @@ static int cy_startup(struct cyclades_port *info, struct tty_struct *tty)
 		spin_unlock_irqrestore(&card->card_lock, flags);
 
 	} else {
-		struct FIRM_ID __iomem *firm_id;
-		struct ZFW_CTRL __iomem *zfw_ctrl;
-		struct BOARD_CTRL __iomem *board_ctrl;
-		struct CH_CTRL __iomem *ch_ctrl;
-
-		base_addr = card->base_addr;
+		struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
 
-		firm_id = base_addr + ID_ADDRESS;
 		if (!cyz_is_loaded(card))
 			return -ENODEV;
 
-		zfw_ctrl = card->base_addr +
-				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-		board_ctrl = &zfw_ctrl->board_ctrl;
-		ch_ctrl = zfw_ctrl->ch_ctrl;
-
 #ifdef CY_DEBUG_OPEN
 		printk(KERN_DEBUG "cyc startup Z card %d, channel %d, "
-			"base_addr %p\n", card, channel, base_addr);
+			"base_addr %p\n", card, channel, card->base_addr);
 #endif
 		spin_lock_irqsave(&card->card_lock, flags);
 
-		cy_writel(&ch_ctrl[channel].op_mode, C_CH_ENABLE);
+		cy_writel(&ch_ctrl->op_mode, C_CH_ENABLE);
 #ifdef Z_WAKE
 #ifdef CONFIG_CYZ_INTR
-		cy_writel(&ch_ctrl[channel].intr_enable,
+		cy_writel(&ch_ctrl->intr_enable,
 			  C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM |
 			  C_IN_RXNNDT | C_IN_IOCTLW | C_IN_MDCD);
 #else
-		cy_writel(&ch_ctrl[channel].intr_enable,
+		cy_writel(&ch_ctrl->intr_enable,
 			  C_IN_IOCTLW | C_IN_MDCD);
 #endif				/* CONFIG_CYZ_INTR */
 #else
 #ifdef CONFIG_CYZ_INTR
-		cy_writel(&ch_ctrl[channel].intr_enable,
+		cy_writel(&ch_ctrl->intr_enable,
 			  C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM |
 			  C_IN_RXNNDT | C_IN_MDCD);
 #else
-		cy_writel(&ch_ctrl[channel].intr_enable, C_IN_MDCD);
+		cy_writel(&ch_ctrl->intr_enable, C_IN_MDCD);
 #endif				/* CONFIG_CYZ_INTR */
 #endif				/* Z_WAKE */
 
@@ -1979,9 +1937,8 @@ static int cy_startup(struct cyclades_port *info, struct tty_struct *tty)
 
 		/* set timeout !!! */
 		/* set RTS and DTR !!! */
-		cy_writel(&ch_ctrl[channel].rs_control,
-			readl(&ch_ctrl[channel].rs_control) | C_RS_RTS |
-			C_RS_DTR);
+		cy_writel(&ch_ctrl->rs_control, readl(&ch_ctrl->rs_control) |
+				C_RS_RTS | C_RS_DTR);
 		retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L);
 		if (retval != 0) {
 			printk(KERN_ERR "cyc:startup(3) retval on ttyC%d was "
@@ -2110,27 +2067,17 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
 		info->port.flags &= ~ASYNC_INITIALIZED;
 		spin_unlock_irqrestore(&card->card_lock, flags);
 	} else {
-		struct FIRM_ID __iomem *firm_id;
-		struct ZFW_CTRL __iomem *zfw_ctrl;
-		struct BOARD_CTRL __iomem *board_ctrl;
-		struct CH_CTRL __iomem *ch_ctrl;
+		struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
 		int retval;
 
-		base_addr = card->base_addr;
 #ifdef CY_DEBUG_OPEN
 		printk(KERN_DEBUG "cyc shutdown Z card %d, channel %d, "
-			"base_addr %p\n", card, channel, base_addr);
+			"base_addr %p\n", card, channel, card->base_addr);
 #endif
 
-		firm_id = base_addr + ID_ADDRESS;
 		if (!cyz_is_loaded(card))
 			return;
 
-		zfw_ctrl = card->base_addr +
-				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-		board_ctrl = &zfw_ctrl->board_ctrl;
-		ch_ctrl = zfw_ctrl->ch_ctrl;
-
 		spin_lock_irqsave(&card->card_lock, flags);
 
 		if (info->port.xmit_buf) {
@@ -2141,9 +2088,9 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
 		}
 
 		if (tty->termios->c_cflag & HUPCL) {
-			cy_writel(&ch_ctrl[channel].rs_control,
-				(__u32)(readl(&ch_ctrl[channel].rs_control) &
-					~(C_RS_RTS | C_RS_DTR)));
+			cy_writel(&ch_ctrl->rs_control,
+				readl(&ch_ctrl->rs_control) &
+					~(C_RS_RTS | C_RS_DTR));
 			retval = cyz_issue_cmd(info->card, channel,
 					C_CM_IOCTLM, 0L);
 			if (retval != 0) {
@@ -2497,15 +2444,11 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
 #ifdef Z_WAKE
 		/* Waiting for on-board buffers to be empty before closing
 		   the port */
-		void __iomem *base_addr = card->base_addr;
-		struct FIRM_ID __iomem *firm_id = base_addr + ID_ADDRESS;
-		struct ZFW_CTRL __iomem *zfw_ctrl =
-		    base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
-		struct CH_CTRL __iomem *ch_ctrl = zfw_ctrl->ch_ctrl;
+		struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
 		int channel = info->line - card->first_line;
 		int retval;
 
-		if (readl(&ch_ctrl[channel].flow_status) != C_FS_TXIDLE) {
+		if (readl(&ch_ctrl->flow_status) != C_FS_TXIDLE) {
 			retval = cyz_issue_cmd(card, channel, C_CM_IOCTLW, 0L);
 			if (retval != 0) {
 				printk(KERN_DEBUG "cyc:cy_close retval on "
@@ -2685,18 +2628,13 @@ static int cy_write_room(struct tty_struct *tty)
 
 static int cy_chars_in_buffer(struct tty_struct *tty)
 {
-	struct cyclades_card *card;
 	struct cyclades_port *info = tty->driver_data;
-	int channel;
 
 	if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer"))
 		return 0;
 
-	card = info->card;
-	channel = (info->line) - (card->first_line);
-
 #ifdef Z_EXT_CHARS_IN_BUFFER
-	if (!cy_is_Z(card)) {
+	if (!cy_is_Z(info->card)) {
 #endif				/* Z_EXT_CHARS_IN_BUFFER */
 #ifdef CY_DEBUG_IO
 		printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n",
@@ -2705,20 +2643,11 @@ static int cy_chars_in_buffer(struct tty_struct *tty)
 		return info->xmit_cnt;
 #ifdef Z_EXT_CHARS_IN_BUFFER
 	} else {
-		static struct FIRM_ID *firm_id;
-		static struct ZFW_CTRL *zfw_ctrl;
-		static struct CH_CTRL *ch_ctrl;
-		static struct BUF_CTRL *buf_ctrl;
+		struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl;
 		int char_count;
 		__u32 tx_put, tx_get, tx_bufsize;
 
 		lock_kernel();
-		firm_id = card->base_addr + ID_ADDRESS;
-		zfw_ctrl = card->base_addr +
-			(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-		ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
-		buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]);
-
 		tx_get = readl(&buf_ctrl->tx_get);
 		tx_put = readl(&buf_ctrl->tx_put);
 		tx_bufsize = readl(&buf_ctrl->tx_bufsize);
@@ -3019,20 +2948,13 @@ static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty)
 		spin_unlock_irqrestore(&card->card_lock, flags);
 
 	} else {
-		struct FIRM_ID __iomem *firm_id;
-		struct ZFW_CTRL __iomem *zfw_ctrl;
-		struct CH_CTRL __iomem *ch_ctrl;
+		struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
 		__u32 sw_flow;
 		int retval;
 
-		firm_id = card->base_addr + ID_ADDRESS;
 		if (!cyz_is_loaded(card))
 			return;
 
-		zfw_ctrl = card->base_addr +
-			(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-		ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
-
 		/* baud rate */
 		baud = tty_get_baud_rate(tty);
 		if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
@@ -3268,10 +3190,6 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file)
 	unsigned char status;
 	unsigned long lstatus;
 	unsigned int result;
-	struct FIRM_ID __iomem *firm_id;
-	struct ZFW_CTRL __iomem *zfw_ctrl;
-	struct BOARD_CTRL __iomem *board_ctrl;
-	struct CH_CTRL __iomem *ch_ctrl;
 
 	if (serial_paranoia_check(info, tty->name, __func__))
 		return -ENODEV;
@@ -3304,14 +3222,8 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file)
 			((status & CyDSR) ? TIOCM_DSR : 0) |
 			((status & CyCTS) ? TIOCM_CTS : 0);
 	} else {
-		base_addr = card->base_addr;
-		firm_id = card->base_addr + ID_ADDRESS;
 		if (cyz_is_loaded(card)) {
-			zfw_ctrl = card->base_addr +
-				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-			board_ctrl = &zfw_ctrl->board_ctrl;
-			ch_ctrl = zfw_ctrl->ch_ctrl;
-			lstatus = readl(&ch_ctrl[channel].rs_status);
+			lstatus = readl(&info->u.cyz.ch_ctrl->rs_status);
 			result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0) |
 				((lstatus & C_RS_DTR) ? TIOCM_DTR : 0) |
 				((lstatus & C_RS_DCD) ? TIOCM_CAR : 0) |
@@ -3336,12 +3248,7 @@ cy_tiocmset(struct tty_struct *tty, struct file *file,
 	struct cyclades_port *info = tty->driver_data;
 	struct cyclades_card *card;
 	int chip, channel, index;
-	void __iomem *base_addr;
 	unsigned long flags;
-	struct FIRM_ID __iomem *firm_id;
-	struct ZFW_CTRL __iomem *zfw_ctrl;
-	struct BOARD_CTRL __iomem *board_ctrl;
-	struct CH_CTRL __iomem *ch_ctrl;
 	int retval;
 
 	if (serial_paranoia_check(info, tty->name, __func__))
@@ -3350,6 +3257,7 @@ cy_tiocmset(struct tty_struct *tty, struct file *file,
 	card = info->card;
 	channel = (info->line) - (card->first_line);
 	if (!cy_is_Z(card)) {
+		void __iomem *base_addr;
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = card->bus_index;
@@ -3421,34 +3329,26 @@ cy_tiocmset(struct tty_struct *tty, struct file *file,
 			spin_unlock_irqrestore(&card->card_lock, flags);
 		}
 	} else {
-		base_addr = card->base_addr;
-
-		firm_id = card->base_addr + ID_ADDRESS;
 		if (cyz_is_loaded(card)) {
-			zfw_ctrl = card->base_addr +
-				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-			board_ctrl = &zfw_ctrl->board_ctrl;
-			ch_ctrl = zfw_ctrl->ch_ctrl;
+			struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
 
 			if (set & TIOCM_RTS) {
 				spin_lock_irqsave(&card->card_lock, flags);
-				cy_writel(&ch_ctrl[channel].rs_control,
-					readl(&ch_ctrl[channel].rs_control) |
-					C_RS_RTS);
+				cy_writel(&ch_ctrl->rs_control,
+					readl(&ch_ctrl->rs_control) | C_RS_RTS);
 				spin_unlock_irqrestore(&card->card_lock, flags);
 			}
 			if (clear & TIOCM_RTS) {
 				spin_lock_irqsave(&card->card_lock, flags);
-				cy_writel(&ch_ctrl[channel].rs_control,
-					readl(&ch_ctrl[channel].rs_control) &
+				cy_writel(&ch_ctrl->rs_control,
+					readl(&ch_ctrl->rs_control) &
 					~C_RS_RTS);
 				spin_unlock_irqrestore(&card->card_lock, flags);
 			}
 			if (set & TIOCM_DTR) {
 				spin_lock_irqsave(&card->card_lock, flags);
-				cy_writel(&ch_ctrl[channel].rs_control,
-					readl(&ch_ctrl[channel].rs_control) |
-					C_RS_DTR);
+				cy_writel(&ch_ctrl->rs_control,
+					readl(&ch_ctrl->rs_control) | C_RS_DTR);
 #ifdef CY_DEBUG_DTR
 				printk(KERN_DEBUG "cyc:set_modem_info raising "
 					"Z DTR\n");
@@ -3457,8 +3357,8 @@ cy_tiocmset(struct tty_struct *tty, struct file *file,
 			}
 			if (clear & TIOCM_DTR) {
 				spin_lock_irqsave(&card->card_lock, flags);
-				cy_writel(&ch_ctrl[channel].rs_control,
-					readl(&ch_ctrl[channel].rs_control) &
+				cy_writel(&ch_ctrl->rs_control,
+					readl(&ch_ctrl->rs_control) &
 					~C_RS_DTR);
 #ifdef CY_DEBUG_DTR
 				printk(KERN_DEBUG "cyc:set_modem_info clearing "
@@ -4171,17 +4071,8 @@ static int cyz_carrier_raised(struct tty_port *port)
 {
 	struct cyclades_port *info = container_of(port, struct cyclades_port,
 			port);
-	struct cyclades_card *cinfo = info->card;
-	void __iomem *base = cinfo->base_addr;
-	struct FIRM_ID __iomem *firm_id = base + ID_ADDRESS;
-	struct ZFW_CTRL __iomem *zfw_ctrl;
-	struct CH_CTRL __iomem *ch_ctrl;
-	int channel = info->line - cinfo->first_line;
 
-	zfw_ctrl = base + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
-	ch_ctrl = zfw_ctrl->ch_ctrl;
-
-	return readl(&ch_ctrl[channel].rs_status) & C_RS_DCD;
+	return readl(&info->u.cyz.ch_ctrl->rs_status) & C_RS_DCD;
 }
 
 static void cyz_dtr_rts(struct tty_port *port, int raise)
@@ -4189,22 +4080,16 @@ static void cyz_dtr_rts(struct tty_port *port, int raise)
 	struct cyclades_port *info = container_of(port, struct cyclades_port,
 			port);
 	struct cyclades_card *cinfo = info->card;
-	void __iomem *base = cinfo->base_addr;
-	struct FIRM_ID __iomem *firm_id = base + ID_ADDRESS;
-	struct ZFW_CTRL __iomem *zfw_ctrl;
-	struct CH_CTRL __iomem *ch_ctrl;
+	struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
 	int ret, channel = info->line - cinfo->first_line;
 	u32 rs;
 
-	zfw_ctrl = base + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
-	ch_ctrl = zfw_ctrl->ch_ctrl;
-
-	rs = readl(&ch_ctrl[channel].rs_control);
+	rs = readl(&ch_ctrl->rs_control);
 	if (raise)
 		rs |= C_RS_RTS | C_RS_DTR;
 	else
 		rs &= ~(C_RS_RTS | C_RS_DTR);
-	cy_writel(&ch_ctrl[channel].rs_control, rs);
+	cy_writel(&ch_ctrl->rs_control, rs);
 	ret = cyz_issue_cmd(cinfo, channel, C_CM_IOCTLM, 0L);
 	if (ret != 0)
 		printk(KERN_ERR "%s: retval on ttyC%d was %x\n",
@@ -4235,8 +4120,7 @@ static const struct tty_port_operations cyz_port_ops = {
 static int __devinit cy_init_card(struct cyclades_card *cinfo)
 {
 	struct cyclades_port *info;
-	unsigned int port;
-	unsigned short chip_number;
+	unsigned int channel, port;
 
 	spin_lock_init(&cinfo->card_lock);
 	cinfo->intr_enabled = 0;
@@ -4248,9 +4132,9 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
 		return -ENOMEM;
 	}
 
-	for (port = cinfo->first_line; port < cinfo->first_line + cinfo->nports;
-			port++) {
-		info = &cinfo->ports[port - cinfo->first_line];
+	for (channel = 0, port = cinfo->first_line; channel < cinfo->nports;
+			channel++, port++) {
+		info = &cinfo->ports[channel];
 		tty_port_init(&info->port);
 		info->magic = CYCLADES_MAGIC;
 		info->card = cinfo;
@@ -4263,8 +4147,17 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
 		init_waitqueue_head(&info->delta_msr_wait);
 
 		if (cy_is_Z(cinfo)) {
+			struct FIRM_ID *firm_id = cinfo->base_addr + ID_ADDRESS;
+			struct ZFW_CTRL *zfw_ctrl;
+
 			info->port.ops = &cyz_port_ops;
 			info->type = PORT_STARTECH;
+
+			zfw_ctrl = cinfo->base_addr +
+				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
+			info->u.cyz.ch_ctrl = &zfw_ctrl->ch_ctrl[channel];
+			info->u.cyz.buf_ctrl = &zfw_ctrl->buf_ctrl[channel];
+
 			if (cinfo->hw_ver == ZO_V1)
 				info->xmit_fifo_size = CYZ_FIFO_SIZE;
 			else
@@ -4274,7 +4167,9 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
 				cyz_rx_restart, (unsigned long)info);
 #endif
 		} else {
+			unsigned short chip_number;
 			int index = cinfo->bus_index;
+
 			info->port.ops = &cyy_port_ops;
 			info->type = PORT_CIRRUS;
 			info->xmit_fifo_size = CyMAX_CHAR_FIFO;
@@ -4282,7 +4177,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
 			info->cor2 = CyETC;
 			info->cor3 = 0x08;	/* _very_ small rcv threshold */
 
-			chip_number = (port - cinfo->first_line) / 4;
+			chip_number = channel / CyPORTS_PER_CHIP;
 			info->chip_rev = readb(cinfo->base_addr +
 				      (cy_chip_offset[chip_number] << index) +
 				      (CyGFRCR << index));
@@ -4976,8 +4871,14 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
 		}
 		cy_card[card_no].num_chips = nchan / CyPORTS_PER_CHIP;
 	} else {
+		struct FIRM_ID __iomem *firm_id = addr2 + ID_ADDRESS;
+		struct ZFW_CTRL __iomem *zfw_ctrl;
+
+		zfw_ctrl = addr2 + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
+
 		cy_card[card_no].hw_ver = mailbox;
 		cy_card[card_no].num_chips = (unsigned int)-1;
+		cy_card[card_no].board_ctrl = &zfw_ctrl->board_ctrl;
 #ifdef CONFIG_CYZ_INTR
 		/* allocate IRQ only if board has an IRQ */
 		if (irq != 0 && irq != 255) {
include/linux/cyclades.h +10 -0
index 1fbdea4..1eb87a6 100644
@@ -499,6 +499,7 @@ struct cyclades_card {
 		void __iomem *p9050;
 		struct RUNTIME_9060 __iomem *p9060;
 	} ctl_addr;
+	struct BOARD_CTRL __iomem *board_ctrl;	/* cyz specific */
 	int irq;
 	unsigned int num_chips;	/* 0 if card absent, -1 if Z/PCI, else Y */
 	unsigned int first_line;	/* minor number of first channel on card */
@@ -541,6 +542,15 @@ struct cyclades_port {
 	int                     magic;
 	struct tty_port		port;
 	struct cyclades_card	*card;
+	union {
+		struct {
+			int filler;
+		} cyy;
+		struct {
+			struct CH_CTRL __iomem	*ch_ctrl;
+			struct BUF_CTRL __iomem	*buf_ctrl;
+		} cyz;
+	} u;
 	int			line;
 	int			flags; 		/* defined in tty.h */
 	int                     type;		/* UART type */
Signature · 1 line
1.6.4.2
#11 lore raw

PATCH 11/79 cyclades: switch to tty_port_hangup

In reply to Greg KH

From: Jiri Slaby <[email protected]>

Do not duplicate common tty_port_hangup code. Use it instead.

Also do not unset ASYNC_NORMAL_ACTIVE and wake up from the tty_hangup() caller. It makes no sense since we don't check that flag in sleepers. tty_port_hangup() performed later will do the right job.

---
 drivers/char/cyclades.c |   23 ++++++-----------------
 1 files changed, 6 insertions(+), 17 deletions(-)
drivers/char/cyclades.c +6 -17
index 7a7092a..226175d 100644
@@ -1290,11 +1290,10 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
 	}
 
 	if ((mdm_change & CyDCD) && (info->port.flags & ASYNC_CHECK_CD)) {
-		if (!(mdm_status & CyDCD)) {
+		if (mdm_status & CyDCD)
+			wake_up_interruptible(&info->port.open_wait);
+		else
 			tty_hangup(tty);
-			info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
-		}
-		wake_up_interruptible(&info->port.open_wait);
 	}
 	if ((mdm_change & CyCTS) && (info->port.flags & ASYNC_CTS_FLOW)) {
 		if (tty->hw_stopped) {
@@ -1655,13 +1654,10 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 			if (info->port.flags & ASYNC_CHECK_CD) {
 				u32 dcd = fw_ver > 241 ? param :
 					readl(&info->u.cyz.ch_ctrl->rs_status);
-				if (dcd & C_RS_DCD) {
+				if (dcd & C_RS_DCD)
 					wake_up_interruptible(&info->port.open_wait);
-				} else {
+				else
 					tty_hangup(tty);
-					wake_up_interruptible(&info->port.open_wait);
-					info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
-				}
 			}
 			break;
 		case C_CM_MCTS:
@@ -4009,14 +4005,7 @@ static void cy_hangup(struct tty_struct *tty)
 
 	cy_flush_buffer(tty);
 	cy_shutdown(info, tty);
-	info->port.count = 0;
-#ifdef CY_DEBUG_COUNT
-	printk(KERN_DEBUG "cyc:cy_hangup (%d): setting count to 0\n",
-		current->pid);
-#endif
-	tty_port_tty_set(&info->port, NULL);
-	info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
-	wake_up_interruptible(&info->port.open_wait);
+	tty_port_hangup(&info->port);
 }				/* cy_hangup */
 
 static int cyy_carrier_raised(struct tty_port *port)
Signature · 1 line
1.6.4.2
#12 lore raw

PATCH 12/79 cyclades: close cleanup

In reply to Greg KH

From: Jiri Slaby <[email protected]>

Use new tty helpers for close, which allows much code removal.

The only real change is locking. card_lock for protecting was used inappropriately (just to have a critical section, no matter which lock is used), so the change to port->lock is fine.

Remove also useless debug printks while being there.

---
 drivers/char/cyclades.c |   70 +---------------------------------------------
 1 files changed, 2 insertions(+), 68 deletions(-)
drivers/char/cyclades.c +2 -68
index 226175d..87a40bc 100644
@@ -2361,61 +2361,13 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
 	struct cyclades_card *card;
 	unsigned long flags;
 
-#ifdef CY_DEBUG_OTHER
-	printk(KERN_DEBUG "cyc:cy_close ttyC%d\n", info->line);
-#endif
-
 	if (!info || serial_paranoia_check(info, tty->name, "cy_close"))
 		return;
 
 	card = info->card;
 
-	spin_lock_irqsave(&card->card_lock, flags);
-	/* If the TTY is being hung up, nothing to do */
-	if (tty_hung_up_p(filp)) {
-		spin_unlock_irqrestore(&card->card_lock, flags);
+	if (!tty_port_close_start(&info->port, tty, filp))
 		return;
-	}
-#ifdef CY_DEBUG_OPEN
-	printk(KERN_DEBUG "cyc:cy_close ttyC%d, count = %d\n", info->line,
-		info->port.count);
-#endif
-	if ((tty->count == 1) && (info->port.count != 1)) {
-		/*
-		 * Uh, oh.  tty->count is 1, which means that the tty
-		 * structure will be freed.  Info->count should always
-		 * be one in these conditions.  If it's greater than
-		 * one, we've got real problems, since it means the
-		 * serial port won't be shutdown.
-		 */
-		printk(KERN_ERR "cyc:cy_close: bad serial port count; "
-			"tty->count is 1, info->port.count is %d\n", info->port.count);
-		info->port.count = 1;
-	}
-#ifdef CY_DEBUG_COUNT
-	printk(KERN_DEBUG  "cyc:cy_close at (%d): decrementing count to %d\n",
-		current->pid, info->port.count - 1);
-#endif
-	if (--info->port.count < 0) {
-#ifdef CY_DEBUG_COUNT
-		printk(KERN_DEBUG "cyc:cyc_close setting count to 0\n");
-#endif
-		info->port.count = 0;
-	}
-	if (info->port.count) {
-		spin_unlock_irqrestore(&card->card_lock, flags);
-		return;
-	}
-	info->port.flags |= ASYNC_CLOSING;
-
-	/*
-	 * Now we wait for the transmit buffer to clear; and we notify
-	 * the line discipline to only process XON/XOFF characters.
-	 */
-	tty->closing = 1;
-	spin_unlock_irqrestore(&card->card_lock, flags);
-	if (info->port.closing_wait != CY_CLOSING_WAIT_NONE)
-		tty_wait_until_sent(tty, info->port.closing_wait);
 
 	spin_lock_irqsave(&card->card_lock, flags);
 
@@ -2460,28 +2412,10 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
 	spin_unlock_irqrestore(&card->card_lock, flags);
 	cy_shutdown(info, tty);
 	cy_flush_buffer(tty);
-	tty_ldisc_flush(tty);
-	spin_lock_irqsave(&card->card_lock, flags);
 
-	tty->closing = 0;
 	tty_port_tty_set(&info->port, NULL);
-	if (info->port.blocked_open) {
-		spin_unlock_irqrestore(&card->card_lock, flags);
-		if (info->port.close_delay) {
-			msleep_interruptible(jiffies_to_msecs
-						(info->port.close_delay));
-		}
-		wake_up_interruptible(&info->port.open_wait);
-		spin_lock_irqsave(&card->card_lock, flags);
-	}
-	info->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
-	wake_up_interruptible(&info->port.close_wait);
 
-#ifdef CY_DEBUG_OTHER
-	printk(KERN_DEBUG "cyc:cy_close done\n");
-#endif
-
-	spin_unlock_irqrestore(&card->card_lock, flags);
+	tty_port_close_end(&info->port, tty);
 }				/* cy_close */
 
 /* This routine gets called when tty_write has put something into
Signature · 1 line
1.6.4.2
#13 lore raw

PATCH 13/79 cyclades: overall cleanup

In reply to Greg KH

From: Jiri Slaby <[email protected]>

- remove changelog from the file. we don't care about ancient history
- update copyright year
- update version
- constify some stuff
- empty lines removal
- unused variables and macros removal
- remove some asm/ includes, they are sucked by linux/ variants

---
 drivers/char/cyclades.c |  598 +----------------------------------------------
 1 files changed, 12 insertions(+), 586 deletions(-)
drivers/char/cyclades.c +12 -586
index 87a40bc..3884ea4 100644
@@ -11,7 +11,7 @@
  * Initially written by Randolph Bentson <[email protected]>.
  * Modified and maintained by Marcio Saito <[email protected]>.
  *
- * Copyright (C) 2007 Jiri Slaby <[email protected]>
+ * Copyright (C) 2007-2009 Jiri Slaby <[email protected]>
  *
  * Much of the design and some of the code came from serial.c
  * which was copyright (C) 1991, 1992  Linus Torvalds.  It was
@@ -19,577 +19,9 @@
  * and then fixed as suggested by Michael K. Johnson 12/12/92.
  * Converted to pci probing and cleaned up by Jiri Slaby.
  *
- * This version supports shared IRQ's (only for PCI boards).
- *
- * Prevent users from opening non-existing Z ports.
- *
- * Revision 2.3.2.8   2000/07/06 18:14:16 ivan
- * Fixed the PCI detection function to work properly on Alpha systems.
- * Implemented support for TIOCSERGETLSR ioctl.
- * Implemented full support for non-standard baud rates.
- *
- * Revision 2.3.2.7   2000/06/01 18:26:34 ivan
- * Request PLX I/O region, although driver doesn't use it, to avoid
- * problems with other drivers accessing it.
- * Removed count for on-board buffer characters in cy_chars_in_buffer
- * (Cyclades-Z only).
- *
- * Revision 2.3.2.6   2000/05/05 13:56:05 ivan
- * Driver now reports physical instead of virtual memory addresses.
- * Masks were added to some Cyclades-Z read accesses.
- * Implemented workaround for PLX9050 bug that would cause a system lockup
- * in certain systems, depending on the MMIO addresses allocated to the
- * board.
- * Changed the Tx interrupt programming in the CD1400 chips to boost up
- * performance (Cyclom-Y only).
- * Code is now compliant with the new module interface (module_[init|exit]).
- * Make use of the PCI helper functions to access PCI resources.
- * Did some code "housekeeping".
- *
- * Revision 2.3.2.5   2000/01/19 14:35:33 ivan
- * Fixed bug in cy_set_termios on CRTSCTS flag turnoff.
- *
- * Revision 2.3.2.4   2000/01/17 09:19:40 ivan
- * Fixed SMP locking in Cyclom-Y interrupt handler.
- *
- * Revision 2.3.2.3   1999/12/28 12:11:39 ivan
- * Added a new cyclades_card field called nports to allow the driver to
- * know the exact number of ports found by the Z firmware after its load;
- * RX buffer contention prevention logic on interrupt op mode revisited
- * (Cyclades-Z only);
- * Revisited printk's for Z debug;
- * Driver now makes sure that the constant SERIAL_XMIT_SIZE is defined;
- *
- * Revision 2.3.2.2   1999/10/01 11:27:43 ivan
- * Fixed bug in cyz_poll that would make all ports but port 0
- * unable to transmit/receive data (Cyclades-Z only);
- * Implemented logic to prevent the RX buffer from being stuck with data
- * due to a driver / firmware race condition in interrupt op mode
- * (Cyclades-Z only);
- * Fixed bug in block_til_ready logic that would lead to a system crash;
- * Revisited cy_close spinlock usage;
- *
- * Revision 2.3.2.1   1999/09/28 11:01:22 ivan
- * Revisited CONFIG_PCI conditional compilation for PCI board support;
- * Implemented TIOCGICOUNT and TIOCMIWAIT ioctl support;
- * _Major_ cleanup on the Cyclades-Z interrupt support code / logic;
- * Removed CTS handling from the driver -- this is now completely handled
- * by the firmware (Cyclades-Z only);
- * Flush RX on-board buffers on a port open (Cyclades-Z only);
- * Fixed handling of ASYNC_SPD_* TTY flags;
- * Module unload now unmaps all memory area allocated by ioremap;
- *
- * Revision 2.3.1.1   1999/07/15 16:45:53 ivan
- * Removed CY_PROC conditional compilation;
- * Implemented SMP-awareness for the driver;
- * Implemented a new ISA IRQ autoprobe that uses the irq_probe_[on|off]
- * functions;
- * The driver now accepts memory addresses (maddr=0xMMMMM) and IRQs
- * (irq=NN) as parameters (only for ISA boards);
- * Fixed bug in set_line_char that would prevent the Cyclades-Z
- * ports from being configured at speeds above 115.2Kbps;
- * Fixed bug in cy_set_termios that would prevent XON/XOFF flow control
- * switching from working properly;
- * The driver now only prints IRQ info for the Cyclades-Z if it's
- * configured to work in interrupt mode;
- *
- * Revision 2.2.2.3   1999/06/28 11:13:29 ivan
- * Added support for interrupt mode operation for the Z cards;
- * Removed the driver inactivity control for the Z;
- * Added a missing MOD_DEC_USE_COUNT in the cy_open function for when
- * the Z firmware is not loaded yet;
- * Replaced the "manual" Z Tx flush buffer by a call to a FW command of
- * same functionality;
- * Implemented workaround for IRQ setting loss on the PCI configuration
- * registers after a PCI bridge EEPROM reload (affects PLX9060 only);
- *
- * Revision 2.2.2.2  1999/05/14 17:18:15 ivan
- * /proc entry location changed to /proc/tty/driver/cyclades;
- * Added support to shared IRQ's (only for PCI boards);
- * Added support for Cobalt Qube2 systems;
- * IRQ [de]allocation scheme revisited;
- * BREAK implementation changed in order to make use of the 'break_ctl'
- * TTY facility;
- * Fixed typo in TTY structure field 'driver_name';
- * Included a PCI bridge reset and EEPROM reload in the board
- * initialization code (for both Y and Z series).
- *
- * Revision 2.2.2.1  1999/04/08 16:17:43 ivan
- * Fixed a bug in cy_wait_until_sent that was preventing the port to be
- * closed properly after a SIGINT;
- * Module usage counter scheme revisited;
- * Added support to the upcoming Y PCI boards (i.e., support to additional
- * PCI Device ID's).
- *
- * Revision 2.2.1.10 1999/01/20 16:14:29 ivan
- * Removed all unnecessary page-alignement operations in ioremap calls
- * (ioremap is currently safe for these operations).
- *
- * Revision 2.2.1.9  1998/12/30 18:18:30 ivan
- * Changed access to PLX PCI bridge registers from I/O to MMIO, in
- * order to make PLX9050-based boards work with certain motherboards.
- *
- * Revision 2.2.1.8  1998/11/13 12:46:20 ivan
- * cy_close function now resets (correctly) the tty->closing flag;
- * JIFFIES_DIFF macro fixed.
- *
- * Revision 2.2.1.7  1998/09/03 12:07:28 ivan
- * Fixed bug in cy_close function, which was not informing HW of
- * which port should have the reception disabled before doing so;
- * fixed Cyclom-8YoP hardware detection bug.
- *
- * Revision 2.2.1.6  1998/08/20 17:15:39 ivan
- * Fixed bug in cy_close function, which causes malfunction
- * of one of the first 4 ports when a higher port is closed
- * (Cyclom-Y only).
- *
- * Revision 2.2.1.5  1998/08/10 18:10:28 ivan
- * Fixed Cyclom-4Yo hardware detection bug.
- *
- * Revision 2.2.1.4  1998/08/04 11:02:50 ivan
- * /proc/cyclades implementation with great collaboration of
- * Marc Lewis <[email protected]>;
- * cyy_interrupt was changed to avoid occurrence of kernel oopses
- * during PPP operation.
- *
- * Revision 2.2.1.3  1998/06/01 12:09:10 ivan
- * General code review in order to comply with 2.1 kernel standards;
- * data loss prevention for slow devices revisited (cy_wait_until_sent
- * was created);
- * removed conditional compilation for new/old PCI structure support
- * (now the driver only supports the new PCI structure).
- *
- * Revision 2.2.1.1  1998/03/19 16:43:12 ivan
- * added conditional compilation for new/old PCI structure support;
- * removed kernel series (2.0.x / 2.1.x) conditional compilation.
- *
- * Revision 2.1.1.3  1998/03/16 18:01:12 ivan
- * cleaned up the data loss fix;
- * fixed XON/XOFF handling once more (Cyclades-Z);
- * general review of the driver routines;
- * introduction of a mechanism to prevent data loss with slow
- * printers, by forcing a delay before closing the port.
- *
- * Revision 2.1.1.2  1998/02/17 16:50:00 ivan
- * fixed detection/handling of new CD1400 in Ye boards;
- * fixed XON/XOFF handling (Cyclades-Z);
- * fixed data loss caused by a premature port close;
- * introduction of a flag that holds the CD1400 version ID per port
- * (used by the CYGETCD1400VER new ioctl).
- *
- * Revision 2.1.1.1  1997/12/03 17:31:19 ivan
- * Code review for the module cleanup routine;
- * fixed RTS and DTR status report for new CD1400's in get_modem_info;
- * includes anonymous changes regarding signal_pending.
- *
- * Revision 2.1  1997/11/01 17:42:41 ivan
- * Changes in the driver to support Alpha systems (except 8Zo V_1);
- * BREAK fix for the Cyclades-Z boards;
- * driver inactivity control by FW implemented;
- * introduction of flag that allows driver to take advantage of
- * a special CD1400 feature related to HW flow control;
- * added support for the CD1400  rev. J (Cyclom-Y boards);
- * introduction of ioctls to:
- *  - control the rtsdtr_inv flag (Cyclom-Y);
- *  - control the rflow flag (Cyclom-Y);
- *  - adjust the polling interval (Cyclades-Z);
- *
- * Revision 1.36.4.33  1997/06/27 19:00:00  ivan
- * Fixes related to kernel version conditional
- * compilation.
- *
- * Revision 1.36.4.32  1997/06/14 19:30:00  ivan
- * Compatibility issues between kernels 2.0.x and
- * 2.1.x (mainly related to clear_bit function).
- *
- * Revision 1.36.4.31  1997/06/03 15:30:00  ivan
- * Changes to define the memory window according to the
- * board type.
- *
- * Revision 1.36.4.30  1997/05/16 15:30:00  daniel
- * Changes to support new cycladesZ boards.
- *
- * Revision 1.36.4.29  1997/05/12 11:30:00  daniel
- * Merge of Bentson's and Daniel's version 1.36.4.28.
- * Corrects bug in cy_detect_pci: check if there are more
- * ports than the number of static structs allocated.
- * Warning message during initialization if this driver is
- * used with the new generation of cycladesZ boards.  Those
- * will be supported only in next release of the driver.
- * Corrects bug in cy_detect_pci and cy_detect_isa that
- * returned wrong number of VALID boards, when a cyclomY
- * was found with no serial modules connected.
- * Changes to use current (2.1.x) kernel subroutine names
- * and created macros for compilation with 2.0.x kernel,
- * instead of the other way around.
- *
- * Revision 1.36.4.28  1997/05/?? ??:00:00  bentson
- * Change queue_task_irq_off to queue_task_irq.
- * The inline function queue_task_irq_off (tqueue.h)
- * was removed from latest releases of 2.1.x kernel.
- * Use of macro __init to mark the initialization
- * routines, so memory can be reused.
- * Also incorporate implementation of critical region
- * in function cleanup_module() created by anonymous
- * linuxer.
- *
- * Revision 1.36.4.28  1997/04/25 16:00:00  daniel
- * Change to support new firmware that solves DCD problem:
- * application could fail to receive SIGHUP signal when DCD
- * varying too fast.
- *
- * Revision 1.36.4.27  1997/03/26 10:30:00  daniel
- * Changed for support linux versions 2.1.X.
- * Backward compatible with linux versions 2.0.X.
- * Corrected illegal use of filler field in
- * CH_CTRL struct.
- * Deleted some debug messages.
- *
- * Revision 1.36.4.26  1997/02/27 12:00:00  daniel
- * Included check for NULL tty pointer in cyz_poll.
- *
- * Revision 1.36.4.25  1997/02/26 16:28:30  bentson
- * Bill Foster at Blarg! Online services noticed that
- * some of the switch elements of -Z modem control
- * lacked a closing "break;"
- *
- * Revision 1.36.4.24  1997/02/24 11:00:00  daniel
- * Changed low water threshold for buffer xmit_buf
- *
- * Revision 1.36.4.23  1996/12/02 21:50:16  bentson
- * Marcio provided fix to modem status fetch for -Z
- *
- * Revision 1.36.4.22  1996/10/28 22:41:17  bentson
- * improve mapping of -Z control page (thanks to Steve
- * Price <[email protected]> for help on this)
- *
- * Revision 1.36.4.21  1996/09/10 17:00:10  bentson
- * shift from CPU-bound to memcopy in cyz_polling operation
- *
- * Revision 1.36.4.20  1996/09/09 18:30:32  Bentson
- * Added support to set and report higher speeds.
- *
- * Revision 1.36.4.19c  1996/08/09 10:00:00  Marcio Saito
- * Some fixes in the HW flow control for the BETA release.
- * Don't try to register the IRQ.
- *
- * Revision 1.36.4.19  1996/08/08 16:23:18  Bentson
- * make sure "cyc" appears in all kernel messages; all soft interrupts
- * handled by same routine; recognize out-of-band reception; comment
- * out some diagnostic messages; leave RTS/CTS flow control to hardware;
- * fix race condition in -Z buffer management; only -Y needs to explicitly
- * flush chars; tidy up some startup messages;
- *
- * Revision 1.36.4.18  1996/07/25 18:57:31  bentson
- * shift MOD_INC_USE_COUNT location to match
- * serial.c; purge some diagnostic messages;
- *
- * Revision 1.36.4.17  1996/07/25 18:01:08  bentson
- * enable modem status messages and fetch & process them; note
- * time of last activity type for each port; set_line_char now
- * supports more than line 0 and treats 0 baud correctly;
- * get_modem_info senses rs_status;
- *
- * Revision 1.36.4.16  1996/07/20 08:43:15  bentson
- * barely works--now's time to turn on
- * more features 'til it breaks
- *
- * Revision 1.36.4.15  1996/07/19 22:30:06  bentson
- * check more -Z board status; shorten boot message
- *
- * Revision 1.36.4.14  1996/07/19 22:20:37  bentson
- * fix reference to ch_ctrl in startup; verify return
- * values from cyz_issue_cmd and cyz_update_channel;
- * more stuff to get modem control correct;
- *
- * Revision 1.36.4.13  1996/07/11 19:53:33  bentson
- * more -Z stuff folded in; re-order changes to put -Z stuff
- * after -Y stuff (to make changes clearer)
- *
- * Revision 1.36.4.12  1996/07/11 15:40:55  bentson
- * Add code to poll Cyclades-Z.  Add code to get & set RS-232 control.
- * Add code to send break.  Clear firmware ID word at startup (so
- * that other code won't talk to inactive board).
- *
- * Revision 1.36.4.11  1996/07/09 05:28:29  bentson
- * add code for -Z in set_line_char
- *
- * Revision 1.36.4.10  1996/07/08 19:28:37  bentson
- * fold more -Z stuff (or in some cases, error messages)
- * into driver; add text to "don't know what to do" messages.
- *
- * Revision 1.36.4.9  1996/07/08 18:38:38  bentson
- * moved compile-time flags near top of file; cosmetic changes
- * to narrow text (to allow 2-up printing); changed many declarations
- * to "static" to limit external symbols; shuffled code order to
- * coalesce -Y and -Z specific code, also to put internal functions
- * in order of tty_driver structure; added code to recognize -Z
- * ports (and for moment, do nothing or report error); add cy_startup
- * to parse boot command line for extra base addresses for ISA probes;
- *
- * Revision 1.36.4.8  1996/06/25 17:40:19  bentson
- * reorder some code, fix types of some vars (int vs. long),
- * add cy_setup to support user declared ISA addresses
- *
- * Revision 1.36.4.7  1996/06/21 23:06:18  bentson
- * dump ioctl based firmware load (it's now a user level
- * program); ensure uninitialzed ports cannot be used
- *
- * Revision 1.36.4.6  1996/06/20 23:17:19  bentson
- * rename vars and restructure some code
- *
- * Revision 1.36.4.5  1996/06/14 15:09:44  bentson
- * get right status back after boot load
- *
- * Revision 1.36.4.4  1996/06/13 19:51:44  bentson
- * successfully loads firmware
- *
- * Revision 1.36.4.3  1996/06/13 06:08:33  bentson
- * add more of the code for the boot/load ioctls
- *
- * Revision 1.36.4.2  1996/06/11 21:00:51  bentson
- * start to add Z functionality--starting with ioctl
- * for loading firmware
- *
- * Revision 1.36.4.1  1996/06/10 18:03:02  bentson
- * added code to recognize Z/PCI card at initialization; report
- * presence, but card is not initialized (because firmware needs
- * to be loaded)
- *
- * Revision 1.36.3.8  1996/06/07 16:29:00  bentson
- * starting minor number at zero; added missing verify_area
- * as noted by Heiko Eißfeldt <[email protected]>
- *
- * Revision 1.36.3.7  1996/04/19 21:06:18  bentson
- * remove unneeded boot message & fix CLOCAL hardware flow
- * control (Miquel van Smoorenburg <[email protected]>);
- * remove unused diagnostic statements; minor 0 is first;
- *
- * Revision 1.36.3.6  1996/03/13 13:21:17  marcio
- * The kernel function vremap (available only in later 1.3.xx kernels)
- * allows the access to memory addresses above the RAM. This revision
- * of the driver supports PCI boards below 1Mb (device id 0x100) and
- * above 1Mb (device id 0x101).
- *
- * Revision 1.36.3.5  1996/03/07 15:20:17  bentson
- * Some global changes to interrupt handling spilled into
- * this driver--mostly unused arguments in system function
- * calls.  Also added change by Marcio Saito which should
- * reduce lost interrupts at startup by fast processors.
- *
- * Revision 1.36.3.4  1995/11/13  20:45:10  bentson
- * Changes by Corey Minyard <[email protected]> distributed
- * in 1.3.41 kernel to remove a possible race condition, extend
- * some error messages, and let the driver run as a loadable module
- * Change by Alan Wendt <[email protected]> to remove a
- * possible race condition.
- * Change by Marcio Saito <[email protected]> to fix PCI addressing.
- *
- * Revision 1.36.3.3  1995/11/13  19:44:48  bentson
- * Changes by Linus Torvalds in 1.3.33 kernel distribution
- * required due to reordering of driver initialization.
- * Drivers are now initialized *after* memory management.
- *
- * Revision 1.36.3.2  1995/09/08  22:07:14  bentson
- * remove printk from ISR; fix typo
- *
- * Revision 1.36.3.1  1995/09/01  12:00:42  marcio
- * Minor fixes in the PCI board support. PCI function calls in
- * conditional compilation (CONFIG_PCI). Thanks to Jim Duncan
- * <[email protected]>. "bad serial count" message removed.
- *
- * Revision 1.36.3  1995/08/22  09:19:42  marcio
- * Cyclom-Y/PCI support added. Changes in the cy_init routine and
- * board initialization. Changes in the boot messages. The driver
- * supports up to 4 boards and 64 ports by default.
- *
- * Revision 1.36.1.4  1995/03/29  06:14:14  bentson
- * disambiguate between Cyclom-16Y and Cyclom-32Ye;
- *
- * Revision 1.36.1.3  1995/03/23  22:15:35  bentson
- * add missing break in modem control block in ioctl switch statement
- * (discovered by Michael Edward Chastain <[email protected]>);
- *
- * Revision 1.36.1.2  1995/03/22  19:16:22  bentson
- * make sure CTS flow control is set as soon as possible (thanks
- * to note from David Lambert <[email protected]>);
- *
- * Revision 1.36.1.1  1995/03/13  15:44:43  bentson
- * initialize defaults for receive threshold and stale data timeout;
- * cosmetic changes;
- *
- * Revision 1.36  1995/03/10  23:33:53  bentson
- * added support of chips 4-7 in 32 port Cyclom-Ye;
- * fix cy_interrupt pointer dereference problem
- * (Joe Portman <[email protected]>);
- * give better error response if open is attempted on non-existent port
- * (Zachariah Vaum <[email protected]>);
- * correct command timeout (Kenneth Lerman <lerman@@seltd.newnet.com>);
- * conditional compilation for -16Y on systems with fast, noisy bus;
- * comment out diagnostic print function;
- * cleaned up table of base addresses;
- * set receiver time-out period register to correct value,
- * set receive threshold to better default values,
- * set chip timer to more accurate 200 Hz ticking,
- * add code to monitor and modify receive parameters
- * (Rik Faith <[email protected]> Nick Simicich
- * <[email protected]>);
- *
- * Revision 1.35  1994/12/16  13:54:18  steffen
- * additional patch by Marcio Saito for board detection
- * Accidently left out in 1.34
- *
- * Revision 1.34  1994/12/10  12:37:12  steffen
- * This is the corrected version as suggested by Marcio Saito
- *
- * Revision 1.33  1994/12/01  22:41:18  bentson
- * add hooks to support more high speeds directly; add tytso
- * patch regarding CLOCAL wakeups
- *
- * Revision 1.32  1994/11/23  19:50:04  bentson
- * allow direct kernel control of higher signalling rates;
- * look for cards at additional locations
- *
- * Revision 1.31  1994/11/16  04:33:28  bentson
- * ANOTHER fix from Corey Minyard, [email protected]
- * a problem in chars_in_buffer has been resolved by some
- * small changes;  this should yield smoother output
- *
- * Revision 1.30  1994/11/16  04:28:05  bentson
- * Fix from Corey Minyard, Internet: [email protected],
- * UUCP: [email protected], WORK: minyardbnr.ca, to
- * cy_hangup that appears to clear up much (all?) of the
- * DTR glitches; also he's added/cleaned-up diagnostic messages
- *
- * Revision 1.29  1994/11/16  04:16:07  bentson
- * add change proposed by Ralph Sims, [email protected], to
- * operate higher speeds in same way as other serial ports;
- * add more serial ports (for up to two 16-port muxes).
- *
- * Revision 1.28  1994/11/04  00:13:16  root
- * turn off diagnostic messages
- *
- * Revision 1.27  1994/11/03  23:46:37  root
- * bunch of changes to bring driver into greater conformance
- * with the serial.c driver (looking for missed fixes)
- *
- * Revision 1.26  1994/11/03  22:40:36  root
- * automatic interrupt probing fixed.
- *
- * Revision 1.25  1994/11/03  20:17:02  root
- * start to implement auto-irq
- *
- * Revision 1.24  1994/11/03  18:01:55  root
- * still working on modem signals--trying not to drop DTR
- * during the getty/login processes
- *
- * Revision 1.23  1994/11/03  17:51:36  root
- * extend baud rate support; set receive threshold as function
- * of baud rate; fix some problems with RTS/CTS;
- *
- * Revision 1.22  1994/11/02  18:05:35  root
- * changed arguments to udelay to type long to get
- * delays to be of correct duration
- *
- * Revision 1.21  1994/11/02  17:37:30  root
- * employ udelay (after calibrating loops_per_second earlier
- * in init/main.c) instead of using home-grown delay routines
- *
- * Revision 1.20  1994/11/02  03:11:38  root
- * cy_chars_in_buffer forces a return value of 0 to let
- * login work (don't know why it does); some functions
- * that were returning EFAULT, now executes the code;
- * more work on deciding when to disable xmit interrupts;
- *
- * Revision 1.19  1994/11/01  20:10:14  root
- * define routine to start transmission interrupts (by enabling
- * transmit interrupts); directly enable/disable modem interrupts;
- *
- * Revision 1.18  1994/11/01  18:40:45  bentson
- * Don't always enable transmit interrupts in startup; interrupt on
- * TxMpty instead of TxRdy to help characters get out before shutdown;
- * restructure xmit interrupt to check for chars first and quit if
- * none are ready to go; modem status (MXVRx) is upright, _not_ inverted
- * (to my view);
- *
- * Revision 1.17  1994/10/30  04:39:45  bentson
- * rename serial_driver and callout_driver to cy_serial_driver and
- * cy_callout_driver to avoid linkage interference; initialize
- * info->type to PORT_CIRRUS; ruggedize paranoia test; elide ->port
- * from cyclades_port structure; add paranoia check to cy_close;
- *
- * Revision 1.16  1994/10/30  01:14:33  bentson
- * change major numbers; add some _early_ return statements;
- *
- * Revision 1.15  1994/10/29  06:43:15  bentson
- * final tidying up for clean compile;  enable some error reporting
- *
- * Revision 1.14  1994/10/28  20:30:22  Bentson
- * lots of changes to drag the driver towards the new tty_io
- * structures and operation.  not expected to work, but may
- * compile cleanly.
- *
- * Revision 1.13  1994/07/21  23:08:57  Bentson
- * add some diagnostic cruft; support 24 lines (for testing
- * both -8Y and -16Y cards; be more thorough in servicing all
- * chips during interrupt; add "volatile" a few places to
- * circumvent compiler optimizations; fix base & offset
- * computations in block_til_ready (was causing chip 0 to
- * stop operation)
- *
- * Revision 1.12  1994/07/19  16:42:11  Bentson
- * add some hackery for kernel version 1.1.8; expand
- * error messages; refine timing for delay loops and
- * declare loop params volatile
- *
- * Revision 1.11  1994/06/11  21:53:10  bentson
- * get use of save_car right in transmit interrupt service
- *
- * Revision 1.10.1.1  1994/06/11  21:31:18  bentson
- * add some diagnostic printing; try to fix save_car stuff
- *
- * Revision 1.10  1994/06/11  20:36:08  bentson
- * clean up compiler warnings
- *
- * Revision 1.9  1994/06/11  19:42:46  bentson
- * added a bunch of code to support modem signalling
- *
- * Revision 1.8  1994/06/11  17:57:07  bentson
- * recognize break & parity error
- *
- * Revision 1.7  1994/06/05  05:51:34  bentson
- * Reorder baud table to be monotonic; add cli to CP; discard
- * incoming characters and status if the line isn't open; start to
- * fold code into cy_throttle; start to port get_serial_info,
- * set_serial_info, get_modem_info, set_modem_info, and send_break
- * from serial.c; expand cy_ioctl; relocate and expand config_setup;
- * get flow control characters from tty struct; invalidate ports w/o
- * hardware;
- *
- * Revision 1.6  1994/05/31  18:42:21  bentson
- * add a loop-breaker in the interrupt service routine;
- * note when port is initialized so that it can be shut
- * down under the right conditions; receive works without
- * any obvious errors
- *
- * Revision 1.5  1994/05/30  00:55:02  bentson
- * transmit works without obvious errors
- *
- * Revision 1.4  1994/05/27  18:46:27  bentson
- * incorporated more code from lib_y.c; can now print short
- * strings under interrupt control to port zero; seems to
- * select ports/channels/lines correctly
- *
- * Revision 1.3  1994/05/25  22:12:44  bentson
- * shifting from multi-port on a card to proper multiplexor
- * data structures;  added skeletons of most routines
- *
- * Revision 1.2  1994/05/19  13:21:43  bentson
- * start to crib from other sources
- *
  */
 
-#define CY_VERSION	"2.5"
+#define CY_VERSION	"2.6"
 
 /* If you need to install more boards than NR_CARDS, change the constant
    in the definition below. No other change is necessary to support up to
@@ -648,9 +80,7 @@
 #include <linux/firmware.h>
 #include <linux/device.h>
 
-#include <asm/system.h>
 #include <linux/io.h>
-#include <asm/irq.h>
 #include <linux/uaccess.h>
 
 #include <linux/kernel.h>
@@ -666,7 +96,6 @@ static void cy_send_xchar(struct tty_struct *tty, char ch);
 #ifndef SERIAL_XMIT_SIZE
 #define	SERIAL_XMIT_SIZE	(min(PAGE_SIZE, 4096))
 #endif
-#define WAKEUP_CHARS		256
 
 #define STD_COM_FLAGS (0)
 
@@ -756,25 +185,25 @@ static int cy_next_channel;	/* next minor available */
  *                                               HI            VHI
  *     20
  */
-static int baud_table[] = {
+static const int baud_table[] = {
 	0, 50, 75, 110, 134, 150, 200, 300, 600, 1200,
 	1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000,
 	230400, 0
 };
 
-static char baud_co_25[] = {	/* 25 MHz clock option table */
+static const char baud_co_25[] = {	/* 25 MHz clock option table */
 	/* value =>    00    01   02    03    04 */
 	/* divide by    8    32   128   512  2048 */
 	0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02,
 	0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };
 
-static char baud_bpr_25[] = {	/* 25 MHz baud rate period table */
+static const char baud_bpr_25[] = {	/* 25 MHz baud rate period table */
 	0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3,
 	0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15
 };
 
-static char baud_co_60[] = {	/* 60 MHz clock option table (CD1400 J) */
+static const char baud_co_60[] = {	/* 60 MHz clock option table (CD1400 J) */
 	/* value =>    00    01   02    03    04 */
 	/* divide by    8    32   128   512  2048 */
 	0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03,
@@ -782,13 +211,13 @@ static char baud_co_60[] = {	/* 60 MHz clock option table (CD1400 J) */
 	0x00
 };
 
-static char baud_bpr_60[] = {	/* 60 MHz baud rate period table (CD1400 J) */
+static const char baud_bpr_60[] = {	/* 60 MHz baud rate period table (CD1400 J) */
 	0x00, 0x82, 0x21, 0xff, 0xdb, 0xc3, 0x92, 0x62, 0xc3, 0x62,
 	0x41, 0xc3, 0x62, 0xc3, 0x62, 0xc3, 0x82, 0x62, 0x41, 0x32,
 	0x21
 };
 
-static char baud_cor3[] = {	/* receive threshold */
+static const char baud_cor3[] = {	/* receive threshold */
 	0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
 	0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07,
 	0x07
@@ -805,7 +234,7 @@ static char baud_cor3[] = {	/* receive threshold */
  * cables.
  */
 
-static char rflow_thr[] = {	/* rflow threshold */
+static const char rflow_thr[] = {	/* rflow threshold */
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x00, 0x00, 0x00, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
 	0x0a
@@ -827,7 +256,7 @@ static const unsigned int cy_chip_offset[] = { 0x0000,
 /* PCI related definitions */
 
 #ifdef CONFIG_PCI
-static struct pci_device_id cy_pci_dev_id[] __devinitdata = {
+static const struct pci_device_id cy_pci_dev_id[] = {
 	/* PCI < 1Mb */
 	{ PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Lo) },
 	/* PCI > 1Mb */
@@ -893,7 +322,7 @@ static inline bool cyz_is_loaded(struct cyclades_card *card)
 }
 
 static inline int serial_paranoia_check(struct cyclades_port *info,
-		char *name, const char *routine)
+		const char *name, const char *routine)
 {
 #ifdef SERIAL_PARANOIA_CHECK
 	if (!info) {
@@ -909,7 +338,7 @@ static inline int serial_paranoia_check(struct cyclades_port *info,
 	}
 #endif
 	return 0;
-}				/* serial_paranoia_check */
+}
 
 /***********************************************************/
 /********* Start of block of Cyclom-Y specific code ********/
@@ -3030,11 +2459,9 @@ cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty,
 		struct serial_struct __user *new_info)
 {
 	struct serial_struct new_serial;
-	struct cyclades_port old_info;
 
 	if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
 		return -EFAULT;
-	old_info = *info;
 
 	if (!capable(CAP_SYS_ADMIN)) {
 		if (new_serial.close_delay != info->port.close_delay ||
@@ -3376,7 +2803,6 @@ static int cy_break(struct tty_struct *tty, int break_state)
 static int get_mon_info(struct cyclades_port *info,
 				struct cyclades_monitor __user *mon)
 {
-
 	if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor)))
 		return -EFAULT;
 	info->mon.int_count = 0;
Signature · 1 line
1.6.4.2
#14 lore raw

PATCH 14/79 cyclades: sleep instead busy-wait

In reply to Greg KH

From: Jiri Slaby <[email protected]>

Avoid long busy loops (5 ms) which may be replaced by sleeps.

---
 drivers/char/cyclades.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
drivers/char/cyclades.c +2 -2
index 3884ea4..b6d40ad 100644
@@ -389,7 +389,7 @@ static unsigned detect_isa_irq(void __iomem *address)
 
 	irqs = probe_irq_on();
 	/* Wait ... */
-	udelay(5000L);
+	msleep(5);
 
 	/* Enable the Tx interrupts on the CD1400 */
 	local_irq_save(flags);
@@ -402,7 +402,7 @@ static unsigned detect_isa_irq(void __iomem *address)
 	local_irq_restore(flags);
 
 	/* Wait ... */
-	udelay(5000L);
+	msleep(5);
 
 	/* Check which interrupt is in use */
 	irq = probe_irq_off(irqs);
Signature · 1 line
1.6.4.2
#15 lore raw

PATCH 15/79 cyclades: use dtr_rts helpers

In reply to Greg KH

From: Jiri Slaby <[email protected]>

For Z cards, use tty helpers for dtr_rts.

If we did the same for Y cards, it will cause a deadlock, because cyy_dtr_rts takes a lock which we already hold.

Instead, we introduce a Y helper expecting card lock to be held. It may then be called with set/clear masks from other places.

---
 drivers/char/cyclades.c |  280 +++++++++++++---------------------------------
 1 files changed, 79 insertions(+), 201 deletions(-)
drivers/char/cyclades.c +79 -201
index b6d40ad..7462795 100644
@@ -825,6 +825,66 @@ static irqreturn_t cyy_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }				/* cyy_interrupt */
 
+static void cyy_change_rts_dtr(struct cyclades_port *info, unsigned int set,
+		unsigned int clear)
+{
+	struct cyclades_card *card = info->card;
+	void __iomem *base_addr;
+	int chip, channel, index;
+
+	channel = info->line - card->first_line;
+	chip = channel >> 2;
+	channel &= 0x03;
+	index = card->bus_index;
+	base_addr = card->base_addr + (cy_chip_offset[chip] << index);
+
+	if (set & TIOCM_RTS) {
+		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
+		if (info->rtsdtr_inv) {
+			cy_writeb(base_addr + (CyMSVR2 << index), CyDTR);
+		} else {
+			cy_writeb(base_addr + (CyMSVR1 << index), CyRTS);
+		}
+	}
+	if (clear & TIOCM_RTS) {
+		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
+		if (info->rtsdtr_inv) {
+			cy_writeb(base_addr + (CyMSVR2 << index), ~CyDTR);
+		} else {
+			cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS);
+		}
+	}
+	if (set & TIOCM_DTR) {
+		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
+		if (info->rtsdtr_inv) {
+			cy_writeb(base_addr + (CyMSVR1 << index), CyRTS);
+		} else {
+			cy_writeb(base_addr + (CyMSVR2 << index), CyDTR);
+		}
+#ifdef CY_DEBUG_DTR
+		printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n");
+		printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
+			readb(base_addr + (CyMSVR1 << index)),
+			readb(base_addr + (CyMSVR2 << index)));
+#endif
+	}
+	if (clear & TIOCM_DTR) {
+		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
+		if (info->rtsdtr_inv) {
+			cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS);
+		} else {
+			cy_writeb(base_addr + (CyMSVR2 << index), ~CyDTR);
+		}
+
+#ifdef CY_DEBUG_DTR
+		printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n");
+		printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
+			readb(base_addr + (CyMSVR1 << index)),
+			readb(base_addr + (CyMSVR2 << index)));
+#endif
+	}
+}
+
 /***********************************************************/
 /********* End of block of Cyclom-Y specific code **********/
 /******** Start of block of Cyclades-Z specific code *******/
@@ -1290,16 +1350,7 @@ static int cy_startup(struct cyclades_port *info, struct tty_struct *tty)
 		cyy_issue_cmd(base_addr, CyCHAN_CTL | CyENB_RCVR | CyENB_XMTR,
 				index);
 
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
-		cy_writeb(base_addr + (CyMSVR1 << index), CyRTS);
-		cy_writeb(base_addr + (CyMSVR2 << index), CyDTR);
-
-#ifdef CY_DEBUG_DTR
-		printk(KERN_DEBUG "cyc:startup raising DTR\n");
-		printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-			readb(base_addr + (CyMSVR1 << index)),
-			readb(base_addr + (CyMSVR2 << index)));
-#endif
+		cyy_change_rts_dtr(info, TIOCM_RTS | TIOCM_DTR, 0);
 
 		cy_writeb(base_addr + (CySRER << index),
 			readb(base_addr + (CySRER << index)) | CyRxData);
@@ -1362,16 +1413,7 @@ static int cy_startup(struct cyclades_port *info, struct tty_struct *tty)
 
 		/* set timeout !!! */
 		/* set RTS and DTR !!! */
-		cy_writel(&ch_ctrl->rs_control, readl(&ch_ctrl->rs_control) |
-				C_RS_RTS | C_RS_DTR);
-		retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L);
-		if (retval != 0) {
-			printk(KERN_ERR "cyc:startup(3) retval on ttyC%d was "
-				"%x\n", info->line, retval);
-		}
-#ifdef CY_DEBUG_DTR
-		printk(KERN_DEBUG "cyc:startup raising Z DTR\n");
-#endif
+		tty_port_raise_dtr_rts(&info->port);
 
 		/* enable send, recv, modem !!! */
 
@@ -1473,17 +1515,9 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
 			info->port.xmit_buf = NULL;
 			free_page((unsigned long)temp);
 		}
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
-		if (tty->termios->c_cflag & HUPCL) {
-			cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS);
-			cy_writeb(base_addr + (CyMSVR2 << index), ~CyDTR);
-#ifdef CY_DEBUG_DTR
-			printk(KERN_DEBUG "cyc shutdown dropping DTR\n");
-			printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-				readb(base_addr + (CyMSVR1 << index)),
-				readb(base_addr + (CyMSVR2 << index)));
-#endif
-		}
+		if (tty->termios->c_cflag & HUPCL)
+			cyy_change_rts_dtr(info, 0, TIOCM_RTS | TIOCM_DTR);
+
 		cyy_issue_cmd(base_addr, CyCHAN_CTL | CyDIS_RCVR, index);
 		/* it may be appropriate to clear _XMIT at
 		   some later date (after testing)!!! */
@@ -1492,9 +1526,6 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
 		info->port.flags &= ~ASYNC_INITIALIZED;
 		spin_unlock_irqrestore(&card->card_lock, flags);
 	} else {
-		struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
-		int retval;
-
 #ifdef CY_DEBUG_OPEN
 		printk(KERN_DEBUG "cyc shutdown Z card %d, channel %d, "
 			"base_addr %p\n", card, channel, card->base_addr);
@@ -1512,20 +1543,8 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
 			free_page((unsigned long)temp);
 		}
 
-		if (tty->termios->c_cflag & HUPCL) {
-			cy_writel(&ch_ctrl->rs_control,
-				readl(&ch_ctrl->rs_control) &
-					~(C_RS_RTS | C_RS_DTR));
-			retval = cyz_issue_cmd(info->card, channel,
-					C_CM_IOCTLM, 0L);
-			if (retval != 0) {
-				printk(KERN_ERR"cyc:shutdown retval on ttyC%d "
-					"was %x\n", info->line, retval);
-			}
-#ifdef CY_DEBUG_DTR
-			printk(KERN_DEBUG "cyc:shutdown dropping Z DTR\n");
-#endif
-		}
+		if (tty->termios->c_cflag & HUPCL)
+			tty_port_lower_dtr_rts(&info->port);
 
 		set_bit(TTY_IO_ERROR, &tty->flags);
 		info->port.flags &= ~ASYNC_INITIALIZED;
@@ -2273,35 +2292,10 @@ static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty)
 				  CyDSR | CyCTS | CyRI | CyDCD);
 		}
 
-		if (i == 0) {	/* baud rate is zero, turn off line */
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  ~CyRTS);
-			} else {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  ~CyDTR);
-			}
-#ifdef CY_DEBUG_DTR
-			printk(KERN_DEBUG "cyc:set_line_char dropping DTR\n");
-			printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-				readb(base_addr + (CyMSVR1 << index)),
-				readb(base_addr + (CyMSVR2 << index)));
-#endif
-		} else {
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  CyRTS);
-			} else {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  CyDTR);
-			}
-#ifdef CY_DEBUG_DTR
-			printk(KERN_DEBUG "cyc:set_line_char raising DTR\n");
-			printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-				readb(base_addr + (CyMSVR1 << index)),
-				readb(base_addr + (CyMSVR2 << index)));
-#endif
-		}
+		if (i == 0)	/* baud rate is zero, turn off line */
+			cyy_change_rts_dtr(info, 0, TIOCM_DTR);
+		else
+			cyy_change_rts_dtr(info, TIOCM_DTR, 0);
 
 		clear_bit(TTY_IO_ERROR, &tty->flags);
 		spin_unlock_irqrestore(&card->card_lock, flags);
@@ -2604,9 +2598,8 @@ cy_tiocmset(struct tty_struct *tty, struct file *file,
 {
 	struct cyclades_port *info = tty->driver_data;
 	struct cyclades_card *card;
-	int chip, channel, index;
 	unsigned long flags;
-	int retval;
+	int channel, retval;
 
 	if (serial_paranoia_check(info, tty->name, __func__))
 		return -ENODEV;
@@ -2614,77 +2607,9 @@ cy_tiocmset(struct tty_struct *tty, struct file *file,
 	card = info->card;
 	channel = (info->line) - (card->first_line);
 	if (!cy_is_Z(card)) {
-		void __iomem *base_addr;
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
-		if (set & TIOCM_RTS) {
-			spin_lock_irqsave(&card->card_lock, flags);
-			cy_writeb(base_addr + (CyCAR << index),
-				  (u_char) channel);
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  CyDTR);
-			} else {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  CyRTS);
-			}
-			spin_unlock_irqrestore(&card->card_lock, flags);
-		}
-		if (clear & TIOCM_RTS) {
-			spin_lock_irqsave(&card->card_lock, flags);
-			cy_writeb(base_addr + (CyCAR << index),
-				  (u_char) channel);
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  ~CyDTR);
-			} else {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  ~CyRTS);
-			}
-			spin_unlock_irqrestore(&card->card_lock, flags);
-		}
-		if (set & TIOCM_DTR) {
-			spin_lock_irqsave(&card->card_lock, flags);
-			cy_writeb(base_addr + (CyCAR << index),
-				  (u_char) channel);
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  CyRTS);
-			} else {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  CyDTR);
-			}
-#ifdef CY_DEBUG_DTR
-			printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n");
-			printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-				readb(base_addr + (CyMSVR1 << index)),
-				readb(base_addr + (CyMSVR2 << index)));
-#endif
-			spin_unlock_irqrestore(&card->card_lock, flags);
-		}
-		if (clear & TIOCM_DTR) {
-			spin_lock_irqsave(&card->card_lock, flags);
-			cy_writeb(base_addr + (CyCAR << index),
-				  (u_char) channel);
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  ~CyRTS);
-			} else {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  ~CyDTR);
-			}
-
-#ifdef CY_DEBUG_DTR
-			printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n");
-			printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-				readb(base_addr + (CyMSVR1 << index)),
-				readb(base_addr + (CyMSVR2 << index)));
-#endif
-			spin_unlock_irqrestore(&card->card_lock, flags);
-		}
+		spin_lock_irqsave(&card->card_lock, flags);
+		cyy_change_rts_dtr(info, set, clear);
+		spin_unlock_irqrestore(&card->card_lock, flags);
 	} else {
 		if (cyz_is_loaded(card)) {
 			struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
@@ -3177,8 +3102,6 @@ static void cy_throttle(struct tty_struct *tty)
 	struct cyclades_port *info = tty->driver_data;
 	struct cyclades_card *card;
 	unsigned long flags;
-	void __iomem *base_addr;
-	int chip, channel, index;
 
 #ifdef CY_DEBUG_THROTTLE
 	char buf[64];
@@ -3200,24 +3123,9 @@ static void cy_throttle(struct tty_struct *tty)
 	}
 
 	if (tty->termios->c_cflag & CRTSCTS) {
-		channel = info->line - card->first_line;
 		if (!cy_is_Z(card)) {
-			chip = channel >> 2;
-			channel &= 0x03;
-			index = card->bus_index;
-			base_addr = card->base_addr +
-				(cy_chip_offset[chip] << index);
-
 			spin_lock_irqsave(&card->card_lock, flags);
-			cy_writeb(base_addr + (CyCAR << index),
-				  (u_char) channel);
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  ~CyDTR);
-			} else {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  ~CyRTS);
-			}
+			cyy_change_rts_dtr(info, 0, TIOCM_RTS);
 			spin_unlock_irqrestore(&card->card_lock, flags);
 		} else {
 			info->throttle = 1;
@@ -3235,8 +3143,6 @@ static void cy_unthrottle(struct tty_struct *tty)
 	struct cyclades_port *info = tty->driver_data;
 	struct cyclades_card *card;
 	unsigned long flags;
-	void __iomem *base_addr;
-	int chip, channel, index;
 
 #ifdef CY_DEBUG_THROTTLE
 	char buf[64];
@@ -3257,24 +3163,9 @@ static void cy_unthrottle(struct tty_struct *tty)
 
 	if (tty->termios->c_cflag & CRTSCTS) {
 		card = info->card;
-		channel = info->line - card->first_line;
 		if (!cy_is_Z(card)) {
-			chip = channel >> 2;
-			channel &= 0x03;
-			index = card->bus_index;
-			base_addr = card->base_addr +
-				(cy_chip_offset[chip] << index);
-
 			spin_lock_irqsave(&card->card_lock, flags);
-			cy_writeb(base_addr + (CyCAR << index),
-				  (u_char) channel);
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  CyDTR);
-			} else {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  CyRTS);
-			}
+			cyy_change_rts_dtr(info, TIOCM_RTS, 0);
 			spin_unlock_irqrestore(&card->card_lock, flags);
 		} else {
 			info->throttle = 0;
@@ -3395,24 +3286,11 @@ static void cyy_dtr_rts(struct tty_port *port, int raise)
 	struct cyclades_port *info = container_of(port, struct cyclades_port,
 			port);
 	struct cyclades_card *cinfo = info->card;
-	void __iomem *base = cinfo->base_addr;
 	unsigned long flags;
-	int channel = info->line - cinfo->first_line;
-	int chip = channel >> 2, index = cinfo->bus_index;
-
-	channel &= 0x03;
-	base += cy_chip_offset[chip] << index;
 
 	spin_lock_irqsave(&cinfo->card_lock, flags);
-	cy_writeb(base + (CyCAR << index), (u8)channel);
-	cy_writeb(base + (CyMSVR1 << index), raise ? CyRTS : ~CyRTS);
-	cy_writeb(base + (CyMSVR2 << index), raise ? CyDTR : ~CyDTR);
-#ifdef CY_DEBUG_DTR
-	printk(KERN_DEBUG "%s: raising DTR\n", __func__);
-	printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-			readb(base + (CyMSVR1 << index)),
-			readb(base + (CyMSVR2 << index)));
-#endif
+	cyy_change_rts_dtr(info, raise ? TIOCM_RTS | TIOCM_DTR : 0,
+			raise ? 0 : TIOCM_RTS | TIOCM_DTR);
 	spin_unlock_irqrestore(&cinfo->card_lock, flags);
 }
 
Signature · 1 line
1.6.4.2
#16 lore raw

PATCH 16/79 cyclades: merge cy_startup tails

In reply to Greg KH

From: Jiri Slaby <[email protected]>

There is a duplicated code for Y and Z in cy_startup, merge the paths.

---
 drivers/char/cyclades.c |   45 ++++++++++++++++-----------------------------
 1 files changed, 16 insertions(+), 29 deletions(-)
drivers/char/cyclades.c +16 -29
index 7462795..47cd7b8 100644
@@ -1296,7 +1296,7 @@ static int cy_startup(struct cyclades_port *info, struct tty_struct *tty)
 	unsigned long flags;
 	int retval = 0;
 	void __iomem *base_addr;
-	int chip, channel, index;
+	int channel;
 	unsigned long page;
 
 	card = info->card;
@@ -1308,14 +1308,11 @@ static int cy_startup(struct cyclades_port *info, struct tty_struct *tty)
 
 	spin_lock_irqsave(&card->card_lock, flags);
 
-	if (info->port.flags & ASYNC_INITIALIZED) {
-		free_page(page);
+	if (info->port.flags & ASYNC_INITIALIZED)
 		goto errout;
-	}
 
 	if (!info->type) {
 		set_bit(TTY_IO_ERROR, &tty->flags);
-		free_page(page);
 		goto errout;
 	}
 
@@ -1329,9 +1326,9 @@ static int cy_startup(struct cyclades_port *info, struct tty_struct *tty)
 	cy_set_line_char(info, tty);
 
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
+		int chip = channel >> 2;
+		int index = card->bus_index;
 		channel &= 0x03;
-		index = card->bus_index;
 		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
 
 #ifdef CY_DEBUG_OPEN
@@ -1354,18 +1351,6 @@ static int cy_startup(struct cyclades_port *info, struct tty_struct *tty)
 
 		cy_writeb(base_addr + (CySRER << index),
 			readb(base_addr + (CySRER << index)) | CyRxData);
-		info->port.flags |= ASYNC_INITIALIZED;
-
-		clear_bit(TTY_IO_ERROR, &tty->flags);
-		info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-		info->breakon = info->breakoff = 0;
-		memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
-		info->idle_stats.in_use =
-		info->idle_stats.recv_idle =
-		info->idle_stats.xmit_idle = jiffies;
-
-		spin_unlock_irqrestore(&card->card_lock, flags);
-
 	} else {
 		struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
 
@@ -1416,18 +1401,19 @@ static int cy_startup(struct cyclades_port *info, struct tty_struct *tty)
 		tty_port_raise_dtr_rts(&info->port);
 
 		/* enable send, recv, modem !!! */
+	}
 
-		info->port.flags |= ASYNC_INITIALIZED;
-		clear_bit(TTY_IO_ERROR, &tty->flags);
-		info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-		info->breakon = info->breakoff = 0;
-		memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
-		info->idle_stats.in_use =
-		info->idle_stats.recv_idle =
-		info->idle_stats.xmit_idle = jiffies;
+	info->port.flags |= ASYNC_INITIALIZED;
 
-		spin_unlock_irqrestore(&card->card_lock, flags);
-	}
+	clear_bit(TTY_IO_ERROR, &tty->flags);
+	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+	info->breakon = info->breakoff = 0;
+	memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
+	info->idle_stats.in_use =
+	info->idle_stats.recv_idle =
+	info->idle_stats.xmit_idle = jiffies;
+
+	spin_unlock_irqrestore(&card->card_lock, flags);
 
 #ifdef CY_DEBUG_OPEN
 	printk(KERN_DEBUG "cyc startup done\n");
@@ -1436,6 +1422,7 @@ static int cy_startup(struct cyclades_port *info, struct tty_struct *tty)
 
 errout:
 	spin_unlock_irqrestore(&card->card_lock, flags);
+	free_page(page);
 	return retval;
 }				/* startup */
 
Signature · 1 line
1.6.4.2
#17 lore raw

PATCH 17/79 cyclades: ioctls cleanup

In reply to Greg KH

From: Jiri Slaby <[email protected]>

- add a cy_ prefix to functions with changed prototypes
- cy_get_serial_info: initialize serial_struct by initializer, save a memset
- inline simple functions (get_mon_info, {s,g}et_default_threshold, {s,g}et_default_timeout) directly in the ioctl handler
- add a cy_cflags_changed helper to not copy its code by wait_event_interruptible
- remove some ret_val = 0 assignments, it's preset to 0
- TIOCGICOUNT: don't do many put_user's, do one copy_to_user

---
 drivers/char/cyclades.c |  179 ++++++++++++++++++-----------------------------
 1 files changed, 67 insertions(+), 112 deletions(-)
drivers/char/cyclades.c +67 -112
index 47cd7b8..e1637ad 100644
@@ -2411,29 +2411,25 @@ static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty)
 	}
 }				/* set_line_char */
 
-static int
-get_serial_info(struct cyclades_port *info,
+static int cy_get_serial_info(struct cyclades_port *info,
 		struct serial_struct __user *retinfo)
 {
-	struct serial_struct tmp;
 	struct cyclades_card *cinfo = info->card;
-
-	if (!retinfo)
-		return -EFAULT;
-	memset(&tmp, 0, sizeof(tmp));
-	tmp.type = info->type;
-	tmp.line = info->line;
-	tmp.port = (info->card - cy_card) * 0x100 + info->line -
-		cinfo->first_line;
-	tmp.irq = cinfo->irq;
-	tmp.flags = info->port.flags;
-	tmp.close_delay = info->port.close_delay;
-	tmp.closing_wait = info->port.closing_wait;
-	tmp.baud_base = info->baud;
-	tmp.custom_divisor = info->custom_divisor;
-	tmp.hub6 = 0;		/*!!! */
+	struct serial_struct tmp = {
+		.type = info->type,
+		.line = info->line,
+		.port = (info->card - cy_card) * 0x100 + info->line -
+			cinfo->first_line,
+		.irq = cinfo->irq,
+		.flags = info->port.flags,
+		.close_delay = info->port.close_delay,
+		.closing_wait = info->port.closing_wait,
+		.baud_base = info->baud,
+		.custom_divisor = info->custom_divisor,
+		.hub6 = 0,		/*!!! */
+	};
 	return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
-}				/* get_serial_info */
+}
 
 static int
 cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty,
@@ -2712,18 +2708,6 @@ static int cy_break(struct tty_struct *tty, int break_state)
 	return retval;
 }				/* cy_break */
 
-static int get_mon_info(struct cyclades_port *info,
-				struct cyclades_monitor __user *mon)
-{
-	if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor)))
-		return -EFAULT;
-	info->mon.int_count = 0;
-	info->mon.char_count = 0;
-	info->mon.char_max = 0;
-	info->mon.char_last = 0;
-	return 0;
-}				/* get_mon_info */
-
 static int set_threshold(struct cyclades_port *info, unsigned long value)
 {
 	struct cyclades_card *card;
@@ -2773,19 +2757,6 @@ static int get_threshold(struct cyclades_port *info,
 	return 0;
 }				/* get_threshold */
 
-static int set_default_threshold(struct cyclades_port *info,
-							unsigned long value)
-{
-	info->default_threshold = value & 0x0f;
-	return 0;
-}				/* set_default_threshold */
-
-static int get_default_threshold(struct cyclades_port *info,
-						unsigned long __user *value)
-{
-	return put_user(info->default_threshold, value);
-}				/* get_default_threshold */
-
 static int set_timeout(struct cyclades_port *info, unsigned long value)
 {
 	struct cyclades_card *card;
@@ -2830,17 +2801,26 @@ static int get_timeout(struct cyclades_port *info,
 	return 0;
 }				/* get_timeout */
 
-static int set_default_timeout(struct cyclades_port *info, unsigned long value)
+static int cy_cflags_changed(struct cyclades_port *info, unsigned long arg,
+		struct cyclades_icount *cprev)
 {
-	info->default_timeout = value & 0xff;
-	return 0;
-}				/* set_default_timeout */
+	struct cyclades_icount cnow;
+	unsigned long flags;
+	int ret;
 
-static int get_default_timeout(struct cyclades_port *info,
-					unsigned long __user *value)
-{
-	return put_user(info->default_timeout, value);
-}				/* get_default_timeout */
+	spin_lock_irqsave(&info->card->card_lock, flags);
+	cnow = info->icount;	/* atomic copy */
+	spin_unlock_irqrestore(&info->card->card_lock, flags);
+
+	ret =	((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) ||
+		((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) ||
+		((arg & TIOCM_CD)  && (cnow.dcd != cprev->dcd)) ||
+		((arg & TIOCM_CTS) && (cnow.cts != cprev->cts));
+
+	*cprev = cnow;
+
+	return ret;
+}
 
 /*
  * This routine allows the tty driver to implement device-
@@ -2852,8 +2832,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 	 unsigned int cmd, unsigned long arg)
 {
 	struct cyclades_port *info = tty->driver_data;
-	struct cyclades_icount cprev, cnow;	/* kernel counter temps */
-	struct serial_icounter_struct __user *p_cuser;	/* user space */
+	struct cyclades_icount cnow;	/* kernel counter temps */
 	int ret_val = 0;
 	unsigned long flags;
 	void __user *argp = (void __user *)arg;
@@ -2869,7 +2848,11 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 
 	switch (cmd) {
 	case CYGETMON:
-		ret_val = get_mon_info(info, argp);
+		if (copy_to_user(argp, &info->mon, sizeof(info->mon))) {
+			ret_val = -EFAULT;
+			break;
+		}
+		memset(&info->mon, 0, sizeof(info->mon));
 		break;
 	case CYGETTHRESH:
 		ret_val = get_threshold(info, argp);
@@ -2878,10 +2861,11 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 		ret_val = set_threshold(info, arg);
 		break;
 	case CYGETDEFTHRESH:
-		ret_val = get_default_threshold(info, argp);
+		ret_val = put_user(info->default_threshold,
+				(unsigned long __user *)argp);
 		break;
 	case CYSETDEFTHRESH:
-		ret_val = set_default_threshold(info, arg);
+		info->default_threshold = arg & 0x0f;
 		break;
 	case CYGETTIMEOUT:
 		ret_val = get_timeout(info, argp);
@@ -2890,21 +2874,20 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 		ret_val = set_timeout(info, arg);
 		break;
 	case CYGETDEFTIMEOUT:
-		ret_val = get_default_timeout(info, argp);
+		ret_val = put_user(info->default_timeout,
+				(unsigned long __user *)argp);
 		break;
 	case CYSETDEFTIMEOUT:
-		ret_val = set_default_timeout(info, arg);
+		info->default_timeout = arg & 0xff;
 		break;
 	case CYSETRFLOW:
 		info->rflow = (int)arg;
-		ret_val = 0;
 		break;
 	case CYGETRFLOW:
 		ret_val = info->rflow;
 		break;
 	case CYSETRTSDTR_INV:
 		info->rtsdtr_inv = (int)arg;
-		ret_val = 0;
 		break;
 	case CYGETRTSDTR_INV:
 		ret_val = info->rtsdtr_inv;
@@ -2915,7 +2898,6 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 #ifndef CONFIG_CYZ_INTR
 	case CYZSETPOLLCYCLE:
 		cyz_polling_cycle = (arg * HZ) / 1000;
-		ret_val = 0;
 		break;
 	case CYZGETPOLLCYCLE:
 		ret_val = (cyz_polling_cycle * 1000) / HZ;
@@ -2923,13 +2905,12 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 #endif				/* CONFIG_CYZ_INTR */
 	case CYSETWAIT:
 		info->port.closing_wait = (unsigned short)arg * HZ / 100;
-		ret_val = 0;
 		break;
 	case CYGETWAIT:
 		ret_val = info->port.closing_wait / (HZ / 100);
 		break;
 	case TIOCGSERIAL:
-		ret_val = get_serial_info(info, argp);
+		ret_val = cy_get_serial_info(info, argp);
 		break;
 	case TIOCSSERIAL:
 		ret_val = cy_set_serial_info(info, tty, argp);
@@ -2948,17 +2929,8 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 		/* note the counters on entry */
 		cnow = info->icount;
 		spin_unlock_irqrestore(&info->card->card_lock, flags);
-		ret_val = wait_event_interruptible(info->delta_msr_wait, ({
-			cprev = cnow;
-			spin_lock_irqsave(&info->card->card_lock, flags);
-			cnow = info->icount;	/* atomic copy */
-			spin_unlock_irqrestore(&info->card->card_lock, flags);
-
-			((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
-			((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
-			((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
-			((arg & TIOCM_CTS) && (cnow.cts != cprev.cts));
-		}));
+		ret_val = wait_event_interruptible(info->delta_msr_wait,
+				cy_cflags_changed(info, arg, &cnow));
 		break;
 
 		/*
@@ -2967,46 +2939,29 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 		 * NB: both 1->0 and 0->1 transitions are counted except for
 		 *     RI where only 0->1 is counted.
 		 */
-	case TIOCGICOUNT:
+	case TIOCGICOUNT: {
+		struct serial_icounter_struct sic = { };
+
 		spin_lock_irqsave(&info->card->card_lock, flags);
 		cnow = info->icount;
 		spin_unlock_irqrestore(&info->card->card_lock, flags);
-		p_cuser = argp;
-		ret_val = put_user(cnow.cts, &p_cuser->cts);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.dsr, &p_cuser->dsr);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.rng, &p_cuser->rng);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.dcd, &p_cuser->dcd);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.rx, &p_cuser->rx);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.tx, &p_cuser->tx);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.frame, &p_cuser->frame);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.overrun, &p_cuser->overrun);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.parity, &p_cuser->parity);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.brk, &p_cuser->brk);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.buf_overrun, &p_cuser->buf_overrun);
-		if (ret_val)
-			break;
-		ret_val = 0;
+
+		sic.cts = cnow.cts;
+		sic.dsr = cnow.dsr;
+		sic.rng = cnow.rng;
+		sic.dcd = cnow.dcd;
+		sic.rx = cnow.rx;
+		sic.tx = cnow.tx;
+		sic.frame = cnow.frame;
+		sic.overrun = cnow.overrun;
+		sic.parity = cnow.parity;
+		sic.brk = cnow.brk;
+		sic.buf_overrun = cnow.buf_overrun;
+
+		if (copy_to_user(argp, &sic, sizeof(sic)))
+			ret_val = -EFAULT;
 		break;
+	}
 	default:
 		ret_val = -ENOIOCTLCMD;
 	}
Signature · 1 line
1.6.4.2
#18 lore raw

PATCH 18/79 cyclades: tiocm cleanup

In reply to Greg KH

From: Jiri Slaby <[email protected]>

- save one indent level by inverting !fw_loaded condition
- read rs_status on Z and write it after we change all the flags, don't do that separately
- remove Y inverted rts/dtr branching, precompute registers and use them

---
 drivers/char/cyclades.c |  153 ++++++++++++++++++++---------------------------
 1 files changed, 66 insertions(+), 87 deletions(-)
drivers/char/cyclades.c +66 -87
index e1637ad..ed66c3a 100644
@@ -831,6 +831,7 @@ static void cyy_change_rts_dtr(struct cyclades_port *info, unsigned int set,
 	struct cyclades_card *card = info->card;
 	void __iomem *base_addr;
 	int chip, channel, index;
+	u32 rts, dtr, msvrr, msvrd;
 
 	channel = info->line - card->first_line;
 	chip = channel >> 2;
@@ -838,29 +839,28 @@ static void cyy_change_rts_dtr(struct cyclades_port *info, unsigned int set,
 	index = card->bus_index;
 	base_addr = card->base_addr + (cy_chip_offset[chip] << index);
 
+	if (info->rtsdtr_inv) {
+		msvrr = CyMSVR2;
+		msvrd = CyMSVR1;
+		rts = CyDTR;
+		dtr = CyRTS;
+	} else {
+		msvrr = CyMSVR1;
+		msvrd = CyMSVR2;
+		rts = CyRTS;
+		dtr = CyDTR;
+	}
 	if (set & TIOCM_RTS) {
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
-		if (info->rtsdtr_inv) {
-			cy_writeb(base_addr + (CyMSVR2 << index), CyDTR);
-		} else {
-			cy_writeb(base_addr + (CyMSVR1 << index), CyRTS);
-		}
+		cy_writeb(base_addr + (CyCAR << index), (u8)channel);
+		cy_writeb(base_addr + (msvrr << index), rts);
 	}
 	if (clear & TIOCM_RTS) {
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
-		if (info->rtsdtr_inv) {
-			cy_writeb(base_addr + (CyMSVR2 << index), ~CyDTR);
-		} else {
-			cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS);
-		}
+		cy_writeb(base_addr + (CyCAR << index), (u8)channel);
+		cy_writeb(base_addr + (msvrr << index), ~rts);
 	}
 	if (set & TIOCM_DTR) {
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
-		if (info->rtsdtr_inv) {
-			cy_writeb(base_addr + (CyMSVR1 << index), CyRTS);
-		} else {
-			cy_writeb(base_addr + (CyMSVR2 << index), CyDTR);
-		}
+		cy_writeb(base_addr + (CyCAR << index), (u8)channel);
+		cy_writeb(base_addr + (msvrd << index), dtr);
 #ifdef CY_DEBUG_DTR
 		printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n");
 		printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
@@ -869,13 +869,8 @@ static void cyy_change_rts_dtr(struct cyclades_port *info, unsigned int set,
 #endif
 	}
 	if (clear & TIOCM_DTR) {
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
-		if (info->rtsdtr_inv) {
-			cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS);
-		} else {
-			cy_writeb(base_addr + (CyMSVR2 << index), ~CyDTR);
-		}
-
+		cy_writeb(base_addr + (CyCAR << index), (u8)channel);
+		cy_writeb(base_addr + (msvrd << index), ~dtr);
 #ifdef CY_DEBUG_DTR
 		printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n");
 		printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
@@ -2518,28 +2513,27 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file)
 {
 	struct cyclades_port *info = tty->driver_data;
 	struct cyclades_card *card;
-	int chip, channel, index;
 	void __iomem *base_addr;
-	unsigned long flags;
-	unsigned char status;
-	unsigned long lstatus;
-	unsigned int result;
+	int result, channel;
 
 	if (serial_paranoia_check(info, tty->name, __func__))
 		return -ENODEV;
 
-	lock_kernel();
-
 	card = info->card;
 	channel = info->line - card->first_line;
+
+	lock_kernel();
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
+		unsigned long flags;
+		unsigned char status;
+		int chip = channel >> 2;
+		int index = card->bus_index;
+
 		channel &= 0x03;
-		index = card->bus_index;
 		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
 
 		spin_lock_irqsave(&card->card_lock, flags);
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
+		cy_writeb(base_addr + (CyCAR << index), (u8)channel);
 		status = readb(base_addr + (CyMSVR1 << index));
 		status |= readb(base_addr + (CyMSVR2 << index));
 		spin_unlock_irqrestore(&card->card_lock, flags);
@@ -2556,21 +2550,22 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file)
 			((status & CyDSR) ? TIOCM_DSR : 0) |
 			((status & CyCTS) ? TIOCM_CTS : 0);
 	} else {
-		if (cyz_is_loaded(card)) {
-			lstatus = readl(&info->u.cyz.ch_ctrl->rs_status);
-			result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0) |
-				((lstatus & C_RS_DTR) ? TIOCM_DTR : 0) |
-				((lstatus & C_RS_DCD) ? TIOCM_CAR : 0) |
-				((lstatus & C_RS_RI) ? TIOCM_RNG : 0) |
-				((lstatus & C_RS_DSR) ? TIOCM_DSR : 0) |
-				((lstatus & C_RS_CTS) ? TIOCM_CTS : 0);
-		} else {
-			result = 0;
-			unlock_kernel();
-			return -ENODEV;
+		u32 lstatus;
+
+		if (!cyz_is_loaded(card)) {
+			result = -ENODEV;
+			goto end;
 		}
 
+		lstatus = readl(&info->u.cyz.ch_ctrl->rs_status);
+		result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0) |
+			((lstatus & C_RS_DTR) ? TIOCM_DTR : 0) |
+			((lstatus & C_RS_DCD) ? TIOCM_CAR : 0) |
+			((lstatus & C_RS_RI) ? TIOCM_RNG : 0) |
+			((lstatus & C_RS_DSR) ? TIOCM_DSR : 0) |
+			((lstatus & C_RS_CTS) ? TIOCM_CTS : 0);
 	}
+end:
 	unlock_kernel();
 	return result;
 }				/* cy_tiomget */
@@ -2582,68 +2577,52 @@ cy_tiocmset(struct tty_struct *tty, struct file *file,
 	struct cyclades_port *info = tty->driver_data;
 	struct cyclades_card *card;
 	unsigned long flags;
-	int channel, retval;
 
 	if (serial_paranoia_check(info, tty->name, __func__))
 		return -ENODEV;
 
 	card = info->card;
-	channel = (info->line) - (card->first_line);
 	if (!cy_is_Z(card)) {
 		spin_lock_irqsave(&card->card_lock, flags);
 		cyy_change_rts_dtr(info, set, clear);
 		spin_unlock_irqrestore(&card->card_lock, flags);
 	} else {
-		if (cyz_is_loaded(card)) {
-			struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
-
-			if (set & TIOCM_RTS) {
-				spin_lock_irqsave(&card->card_lock, flags);
-				cy_writel(&ch_ctrl->rs_control,
-					readl(&ch_ctrl->rs_control) | C_RS_RTS);
-				spin_unlock_irqrestore(&card->card_lock, flags);
-			}
-			if (clear & TIOCM_RTS) {
-				spin_lock_irqsave(&card->card_lock, flags);
-				cy_writel(&ch_ctrl->rs_control,
-					readl(&ch_ctrl->rs_control) &
-					~C_RS_RTS);
-				spin_unlock_irqrestore(&card->card_lock, flags);
-			}
-			if (set & TIOCM_DTR) {
-				spin_lock_irqsave(&card->card_lock, flags);
-				cy_writel(&ch_ctrl->rs_control,
-					readl(&ch_ctrl->rs_control) | C_RS_DTR);
+		struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
+		int retval, channel = info->line - card->first_line;
+		u32 rs;
+
+		if (!cyz_is_loaded(card))
+			return -ENODEV;
+
+		spin_lock_irqsave(&card->card_lock, flags);
+		rs = readl(&ch_ctrl->rs_control);
+		if (set & TIOCM_RTS)
+			rs |= C_RS_RTS;
+		if (clear & TIOCM_RTS)
+			rs &= ~C_RS_RTS;
+		if (set & TIOCM_DTR) {
+			rs |= C_RS_DTR;
 #ifdef CY_DEBUG_DTR
-				printk(KERN_DEBUG "cyc:set_modem_info raising "
-					"Z DTR\n");
+			printk(KERN_DEBUG "cyc:set_modem_info raising Z DTR\n");
 #endif
-				spin_unlock_irqrestore(&card->card_lock, flags);
-			}
-			if (clear & TIOCM_DTR) {
-				spin_lock_irqsave(&card->card_lock, flags);
-				cy_writel(&ch_ctrl->rs_control,
-					readl(&ch_ctrl->rs_control) &
-					~C_RS_DTR);
+		}
+		if (clear & TIOCM_DTR) {
+			rs &= ~C_RS_DTR;
 #ifdef CY_DEBUG_DTR
-				printk(KERN_DEBUG "cyc:set_modem_info clearing "
-					"Z DTR\n");
+			printk(KERN_DEBUG "cyc:set_modem_info clearing "
+				"Z DTR\n");
 #endif
-				spin_unlock_irqrestore(&card->card_lock, flags);
-			}
-		} else {
-			return -ENODEV;
 		}
-		spin_lock_irqsave(&card->card_lock, flags);
+		cy_writel(&ch_ctrl->rs_control, rs);
 		retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L);
+		spin_unlock_irqrestore(&card->card_lock, flags);
 		if (retval != 0) {
 			printk(KERN_ERR "cyc:set_modem_info retval on ttyC%d "
 				"was %x\n", info->line, retval);
 		}
-		spin_unlock_irqrestore(&card->card_lock, flags);
 	}
 	return 0;
-}				/* cy_tiocmset */
+}
 
 /*
  * cy_break() --- routine which turns the break handling on or off
Signature · 1 line
1.6.4.2
#19 lore raw

PATCH 19/79 cyclades: introduce cyy_readb/writeb

In reply to Greg KH

From: Jiri Slaby <[email protected]>

Add helpers for io operations, so that we can eliminate huge amount of supporting code. It is now centralized in those helpers and used values are precomputed in the init phase.

---
 drivers/char/cyclades.c  |  448 +++++++++++++++++-----------------------------
 include/linux/cyclades.h |    2 +-
 2 files changed, 165 insertions(+), 285 deletions(-)
drivers/char/cyclades.c +164 -284
index ed66c3a..cf2874a 100644
@@ -90,7 +90,6 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 
-static void cy_throttle(struct tty_struct *tty);
 static void cy_send_xchar(struct tty_struct *tty, char ch);
 
 #ifndef SERIAL_XMIT_SIZE
@@ -298,6 +297,20 @@ static void cyz_rx_restart(unsigned long);
 static struct timer_list cyz_rx_full_timer[NR_PORTS];
 #endif				/* CONFIG_CYZ_INTR */
 
+static inline void cyy_writeb(struct cyclades_port *port, u32 reg, u8 val)
+{
+	struct cyclades_card *card = port->card;
+
+	cy_writeb(port->u.cyy.base_addr + (reg << card->bus_index), val);
+}
+
+static inline u8 cyy_readb(struct cyclades_port *port, u32 reg)
+{
+	struct cyclades_card *card = port->card;
+
+	return readb(port->u.cyy.base_addr + (reg << card->bus_index));
+}
+
 static inline bool cy_is_Z(struct cyclades_card *card)
 {
 	return card->num_chips == (unsigned int)-1;
@@ -350,13 +363,14 @@ static inline int serial_paranoia_check(struct cyclades_port *info,
 
    This function is only called from inside spinlock-protected code.
  */
-static int cyy_issue_cmd(void __iomem *base_addr, u_char cmd, int index)
+static int __cyy_issue_cmd(void __iomem *base_addr, u8 cmd, int index)
 {
+	void __iomem *ccr = base_addr + (CyCCR << index);
 	unsigned int i;
 
 	/* Check to see that the previous command has completed */
 	for (i = 0; i < 100; i++) {
-		if (readb(base_addr + (CyCCR << index)) == 0)
+		if (readb(ccr) == 0)
 			break;
 		udelay(10L);
 	}
@@ -366,10 +380,16 @@ static int cyy_issue_cmd(void __iomem *base_addr, u_char cmd, int index)
 		return -1;
 
 	/* Issue the new command */
-	cy_writeb(base_addr + (CyCCR << index), cmd);
+	cy_writeb(ccr, cmd);
 
 	return 0;
-}				/* cyy_issue_cmd */
+}
+
+static inline int cyy_issue_cmd(struct cyclades_port *port, u8 cmd)
+{
+	return __cyy_issue_cmd(port->u.cyy.base_addr, cmd,
+			port->card->bus_index);
+}
 
 #ifdef CONFIG_ISA
 /* ISA interrupt detection code */
@@ -394,7 +414,7 @@ static unsigned detect_isa_irq(void __iomem *address)
 	/* Enable the Tx interrupts on the CD1400 */
 	local_irq_save(flags);
 	cy_writeb(address + (CyCAR << index), 0);
-	cyy_issue_cmd(address, CyCHAN_CTL | CyENB_XMTR, index);
+	__cyy_issue_cmd(address, CyCHAN_CTL | CyENB_XMTR, index);
 
 	cy_writeb(address + (CyCAR << index), 0);
 	cy_writeb(address + (CySRER << index),
@@ -428,7 +448,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 	struct cyclades_port *info;
 	struct tty_struct *tty;
 	int len, index = cinfo->bus_index;
-	u8 save_xir, channel, save_car, data, char_count;
+	u8 ivr, save_xir, channel, save_car, data, char_count;
 
 #ifdef CY_DEBUG_INTERRUPTS
 	printk(KERN_DEBUG "cyy_interrupt: rcvd intr, chip %d\n", chip);
@@ -437,26 +457,25 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 	save_xir = readb(base_addr + (CyRIR << index));
 	channel = save_xir & CyIRChannel;
 	info = &cinfo->ports[channel + chip * 4];
-	save_car = readb(base_addr + (CyCAR << index));
-	cy_writeb(base_addr + (CyCAR << index), save_xir);
+	save_car = cyy_readb(info, CyCAR);
+	cyy_writeb(info, CyCAR, save_xir);
+	ivr = cyy_readb(info, CyRIVR) & CyIVRMask;
 
 	tty = tty_port_tty_get(&info->port);
 	/* if there is nowhere to put the data, discard it */
 	if (tty == NULL) {
-		if ((readb(base_addr + (CyRIVR << index)) & CyIVRMask) ==
-				CyIVRRxEx) {	/* exception */
-			data = readb(base_addr + (CyRDSR << index));
+		if (ivr == CyIVRRxEx) {	/* exception */
+			data = cyy_readb(info, CyRDSR);
 		} else {	/* normal character reception */
-			char_count = readb(base_addr + (CyRDCR << index));
+			char_count = cyy_readb(info, CyRDCR);
 			while (char_count--)
-				data = readb(base_addr + (CyRDSR << index));
+				data = cyy_readb(info, CyRDSR);
 		}
 		goto end;
 	}
 	/* there is an open port for this data */
-	if ((readb(base_addr + (CyRIVR << index)) & CyIVRMask) ==
-			CyIVRRxEx) {	/* exception */
-		data = readb(base_addr + (CyRDSR << index));
+	if (ivr == CyIVRRxEx) {	/* exception */
+		data = cyy_readb(info, CyRDSR);
 
 		/* For statistics only */
 		if (data & CyBREAK)
@@ -477,22 +496,22 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 			if (data & info->read_status_mask) {
 				if (data & CyBREAK) {
 					tty_insert_flip_char(tty,
-						readb(base_addr + (CyRDSR <<
-							index)), TTY_BREAK);
+						cyy_readb(info, CyRDSR),
+						TTY_BREAK);
 					info->icount.rx++;
 					if (info->port.flags & ASYNC_SAK)
 						do_SAK(tty);
 				} else if (data & CyFRAME) {
 					tty_insert_flip_char(tty,
-						readb(base_addr + (CyRDSR <<
-							index)), TTY_FRAME);
+						cyy_readb(info, CyRDSR),
+						TTY_FRAME);
 					info->icount.rx++;
 					info->idle_stats.frame_errs++;
 				} else if (data & CyPARITY) {
 					/* Pieces of seven... */
 					tty_insert_flip_char(tty,
-						readb(base_addr + (CyRDSR <<
-							index)), TTY_PARITY);
+						cyy_readb(info, CyRDSR),
+						TTY_PARITY);
 					info->icount.rx++;
 					info->idle_stats.parity_errs++;
 				} else if (data & CyOVERRUN) {
@@ -504,8 +523,8 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 					   the next incoming character.
 					 */
 					tty_insert_flip_char(tty,
-						readb(base_addr + (CyRDSR <<
-							index)), TTY_FRAME);
+						cyy_readb(info, CyRDSR),
+						TTY_FRAME);
 					info->icount.rx++;
 					info->idle_stats.overruns++;
 				/* These two conditions may imply */
@@ -529,7 +548,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 		}
 	} else {	/* normal character reception */
 		/* load # chars available from the chip */
-		char_count = readb(base_addr + (CyRDCR << index));
+		char_count = cyy_readb(info, CyRDCR);
 
 #ifdef CY_ENABLE_MONITORING
 		++info->mon.int_count;
@@ -540,7 +559,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 #endif
 		len = tty_buffer_request_room(tty, char_count);
 		while (len--) {
-			data = readb(base_addr + (CyRDSR << index));
+			data = cyy_readb(info, CyRDSR);
 			tty_insert_flip_char(tty, data, TTY_NORMAL);
 			info->idle_stats.recv_bytes++;
 			info->icount.rx++;
@@ -554,8 +573,8 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 	tty_kref_put(tty);
 end:
 	/* end of service */
-	cy_writeb(base_addr + (CyRIR << index), save_xir & 0x3f);
-	cy_writeb(base_addr + (CyCAR << index), save_car);
+	cyy_writeb(info, CyRIR, save_xir & 0x3f);
+	cyy_writeb(info, CyCAR, save_car);
 }
 
 static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
@@ -588,8 +607,7 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
 	info = &cinfo->ports[channel + chip * 4];
 	tty = tty_port_tty_get(&info->port);
 	if (tty == NULL) {
-		cy_writeb(base_addr + (CySRER << index),
-			  readb(base_addr + (CySRER << index)) & ~CyTxRdy);
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyTxRdy);
 		goto end;
 	}
 
@@ -598,7 +616,7 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
 
 	if (info->x_char) {	/* send special char */
 		outch = info->x_char;
-		cy_writeb(base_addr + (CyTDR << index), outch);
+		cyy_writeb(info, CyTDR, outch);
 		char_count--;
 		info->icount.tx++;
 		info->x_char = 0;
@@ -606,14 +624,14 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
 
 	if (info->breakon || info->breakoff) {
 		if (info->breakon) {
-			cy_writeb(base_addr + (CyTDR << index), 0);
-			cy_writeb(base_addr + (CyTDR << index), 0x81);
+			cyy_writeb(info, CyTDR, 0);
+			cyy_writeb(info, CyTDR, 0x81);
 			info->breakon = 0;
 			char_count -= 2;
 		}
 		if (info->breakoff) {
-			cy_writeb(base_addr + (CyTDR << index), 0);
-			cy_writeb(base_addr + (CyTDR << index), 0x83);
+			cyy_writeb(info, CyTDR, 0);
+			cyy_writeb(info, CyTDR, 0x83);
 			info->breakoff = 0;
 			char_count -= 2;
 		}
@@ -621,27 +639,23 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
 
 	while (char_count-- > 0) {
 		if (!info->xmit_cnt) {
-			if (readb(base_addr + (CySRER << index)) & CyTxMpty) {
-				cy_writeb(base_addr + (CySRER << index),
-					readb(base_addr + (CySRER << index)) &
-						~CyTxMpty);
+			if (cyy_readb(info, CySRER) & CyTxMpty) {
+				cyy_writeb(info, CySRER,
+					cyy_readb(info, CySRER) & ~CyTxMpty);
 			} else {
-				cy_writeb(base_addr + (CySRER << index),
-					(readb(base_addr + (CySRER << index)) &
-						~CyTxRdy) | CyTxMpty);
+				cyy_writeb(info, CySRER, CyTxMpty |
+					(cyy_readb(info, CySRER) & ~CyTxRdy));
 			}
 			goto done;
 		}
 		if (info->port.xmit_buf == NULL) {
-			cy_writeb(base_addr + (CySRER << index),
-				readb(base_addr + (CySRER << index)) &
-					~CyTxRdy);
+			cyy_writeb(info, CySRER,
+				cyy_readb(info, CySRER) & ~CyTxRdy);
 			goto done;
 		}
 		if (tty->stopped || tty->hw_stopped) {
-			cy_writeb(base_addr + (CySRER << index),
-				readb(base_addr + (CySRER << index)) &
-					~CyTxRdy);
+			cyy_writeb(info, CySRER,
+				cyy_readb(info, CySRER) & ~CyTxRdy);
 			goto done;
 		}
 		/* Because the Embedded Transmit Commands have been enabled,
@@ -658,15 +672,15 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
 			info->xmit_cnt--;
 			info->xmit_tail = (info->xmit_tail + 1) &
 					(SERIAL_XMIT_SIZE - 1);
-			cy_writeb(base_addr + (CyTDR << index), outch);
+			cyy_writeb(info, CyTDR, outch);
 			info->icount.tx++;
 		} else {
 			if (char_count > 1) {
 				info->xmit_cnt--;
 				info->xmit_tail = (info->xmit_tail + 1) &
 					(SERIAL_XMIT_SIZE - 1);
-				cy_writeb(base_addr + (CyTDR << index), outch);
-				cy_writeb(base_addr + (CyTDR << index), 0);
+				cyy_writeb(info, CyTDR, outch);
+				cyy_writeb(info, CyTDR, 0);
 				info->icount.tx++;
 				char_count--;
 			}
@@ -678,8 +692,8 @@ done:
 	tty_kref_put(tty);
 end:
 	/* end of service */
-	cy_writeb(base_addr + (CyTIR << index), save_xir & 0x3f);
-	cy_writeb(base_addr + (CyCAR << index), save_car);
+	cyy_writeb(info, CyTIR, save_xir & 0x3f);
+	cyy_writeb(info, CyCAR, save_car);
 }
 
 static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
@@ -694,11 +708,11 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
 	save_xir = readb(base_addr + (CyMIR << index));
 	channel = save_xir & CyIRChannel;
 	info = &cinfo->ports[channel + chip * 4];
-	save_car = readb(base_addr + (CyCAR << index));
-	cy_writeb(base_addr + (CyCAR << index), save_xir);
+	save_car = cyy_readb(info, CyCAR);
+	cyy_writeb(info, CyCAR, save_xir);
 
-	mdm_change = readb(base_addr + (CyMISR << index));
-	mdm_status = readb(base_addr + (CyMSVR1 << index));
+	mdm_change = cyy_readb(info, CyMISR);
+	mdm_status = cyy_readb(info, CyMSVR1);
 
 	tty = tty_port_tty_get(&info->port);
 	if (!tty)
@@ -730,9 +744,8 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
 				/* cy_start isn't used
 				   because... !!! */
 				tty->hw_stopped = 0;
-				cy_writeb(base_addr + (CySRER << index),
-					readb(base_addr + (CySRER << index)) |
-						CyTxRdy);
+				cyy_writeb(info, CySRER,
+					cyy_readb(info, CySRER) | CyTxRdy);
 				tty_wakeup(tty);
 			}
 		} else {
@@ -740,9 +753,8 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
 				/* cy_stop isn't used
 				   because ... !!! */
 				tty->hw_stopped = 1;
-				cy_writeb(base_addr + (CySRER << index),
-					readb(base_addr + (CySRER << index)) &
-						~CyTxRdy);
+				cyy_writeb(info, CySRER,
+					cyy_readb(info, CySRER) & ~CyTxRdy);
 			}
 		}
 	}
@@ -753,8 +765,8 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
 	tty_kref_put(tty);
 end:
 	/* end of service */
-	cy_writeb(base_addr + (CyMIR << index), save_xir & 0x3f);
-	cy_writeb(base_addr + (CyCAR << index), save_car);
+	cyy_writeb(info, CyMIR, save_xir & 0x3f);
+	cyy_writeb(info, CyCAR, save_car);
 }
 
 /* The real interrupt service routine is called
@@ -829,15 +841,10 @@ static void cyy_change_rts_dtr(struct cyclades_port *info, unsigned int set,
 		unsigned int clear)
 {
 	struct cyclades_card *card = info->card;
-	void __iomem *base_addr;
-	int chip, channel, index;
+	int channel = info->line - card->first_line;
 	u32 rts, dtr, msvrr, msvrd;
 
-	channel = info->line - card->first_line;
-	chip = channel >> 2;
 	channel &= 0x03;
-	index = card->bus_index;
-	base_addr = card->base_addr + (cy_chip_offset[chip] << index);
 
 	if (info->rtsdtr_inv) {
 		msvrr = CyMSVR2;
@@ -851,31 +858,31 @@ static void cyy_change_rts_dtr(struct cyclades_port *info, unsigned int set,
 		dtr = CyDTR;
 	}
 	if (set & TIOCM_RTS) {
-		cy_writeb(base_addr + (CyCAR << index), (u8)channel);
-		cy_writeb(base_addr + (msvrr << index), rts);
+		cyy_writeb(info, CyCAR, channel);
+		cyy_writeb(info, msvrr, rts);
 	}
 	if (clear & TIOCM_RTS) {
-		cy_writeb(base_addr + (CyCAR << index), (u8)channel);
-		cy_writeb(base_addr + (msvrr << index), ~rts);
+		cyy_writeb(info, CyCAR, channel);
+		cyy_writeb(info, msvrr, ~rts);
 	}
 	if (set & TIOCM_DTR) {
-		cy_writeb(base_addr + (CyCAR << index), (u8)channel);
-		cy_writeb(base_addr + (msvrd << index), dtr);
+		cyy_writeb(info, CyCAR, channel);
+		cyy_writeb(info, msvrd, dtr);
 #ifdef CY_DEBUG_DTR
 		printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n");
 		printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-			readb(base_addr + (CyMSVR1 << index)),
-			readb(base_addr + (CyMSVR2 << index)));
+			cyy_readb(info, CyMSVR1),
+			cyy_readb(info, CyMSVR2));
 #endif
 	}
 	if (clear & TIOCM_DTR) {
-		cy_writeb(base_addr + (CyCAR << index), (u8)channel);
-		cy_writeb(base_addr + (msvrd << index), ~dtr);
+		cyy_writeb(info, CyCAR, channel);
+		cyy_writeb(info, msvrd, ~dtr);
 #ifdef CY_DEBUG_DTR
 		printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n");
 		printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-			readb(base_addr + (CyMSVR1 << index)),
-			readb(base_addr + (CyMSVR2 << index)));
+			cyy_readb(info, CyMSVR1),
+			cyy_readb(info, CyMSVR2));
 #endif
 	}
 }
@@ -1290,7 +1297,6 @@ static int cy_startup(struct cyclades_port *info, struct tty_struct *tty)
 	struct cyclades_card *card;
 	unsigned long flags;
 	int retval = 0;
-	void __iomem *base_addr;
 	int channel;
 	unsigned long page;
 
@@ -1321,31 +1327,21 @@ static int cy_startup(struct cyclades_port *info, struct tty_struct *tty)
 	cy_set_line_char(info, tty);
 
 	if (!cy_is_Z(card)) {
-		int chip = channel >> 2;
-		int index = card->bus_index;
 		channel &= 0x03;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
 
-#ifdef CY_DEBUG_OPEN
-		printk(KERN_DEBUG "cyc startup card %d, chip %d, channel %d, "
-				"base_addr %p\n",
-				card, chip, channel, base_addr);
-#endif
 		spin_lock_irqsave(&card->card_lock, flags);
 
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
+		cyy_writeb(info, CyCAR, channel);
 
-		cy_writeb(base_addr + (CyRTPR << index),
+		cyy_writeb(info, CyRTPR,
 			(info->default_timeout ? info->default_timeout : 0x02));
 		/* 10ms rx timeout */
 
-		cyy_issue_cmd(base_addr, CyCHAN_CTL | CyENB_RCVR | CyENB_XMTR,
-				index);
+		cyy_issue_cmd(info, CyCHAN_CTL | CyENB_RCVR | CyENB_XMTR);
 
 		cyy_change_rts_dtr(info, TIOCM_RTS | TIOCM_DTR, 0);
 
-		cy_writeb(base_addr + (CySRER << index),
-			readb(base_addr + (CySRER << index)) | CyRxData);
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyRxData);
 	} else {
 		struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
 
@@ -1423,23 +1419,14 @@ errout:
 
 static void start_xmit(struct cyclades_port *info)
 {
-	struct cyclades_card *card;
+	struct cyclades_card *card = info->card;
 	unsigned long flags;
-	void __iomem *base_addr;
-	int chip, channel, index;
+	int channel = info->line - card->first_line;
 
-	card = info->card;
-	channel = info->line - card->first_line;
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
 		spin_lock_irqsave(&card->card_lock, flags);
-		cy_writeb(base_addr + (CyCAR << index), channel);
-		cy_writeb(base_addr + (CySRER << index),
-			readb(base_addr + (CySRER << index)) | CyTxRdy);
+		cyy_writeb(info, CyCAR, channel & 0x03);
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyTxRdy);
 		spin_unlock_irqrestore(&card->card_lock, flags);
 	} else {
 #ifdef CONFIG_CYZ_INTR
@@ -1466,8 +1453,7 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
 {
 	struct cyclades_card *card;
 	unsigned long flags;
-	void __iomem *base_addr;
-	int chip, channel, index;
+	int channel;
 
 	if (!(info->port.flags & ASYNC_INITIALIZED))
 		return;
@@ -1475,17 +1461,6 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
 	card = info->card;
 	channel = info->line - card->first_line;
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
-#ifdef CY_DEBUG_OPEN
-		printk(KERN_DEBUG "cyc shutdown Y card %d, chip %d, "
-				"channel %d, base_addr %p\n",
-				card, chip, channel, base_addr);
-#endif
-
 		spin_lock_irqsave(&card->card_lock, flags);
 
 		/* Clear delta_msr_wait queue to avoid mem leaks. */
@@ -1500,7 +1475,7 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
 		if (tty->termios->c_cflag & HUPCL)
 			cyy_change_rts_dtr(info, 0, TIOCM_RTS | TIOCM_DTR);
 
-		cyy_issue_cmd(base_addr, CyCHAN_CTL | CyDIS_RCVR, index);
+		cyy_issue_cmd(info, CyCHAN_CTL | CyDIS_RCVR);
 		/* it may be appropriate to clear _XMIT at
 		   some later date (after testing)!!! */
 
@@ -1677,8 +1652,6 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
 {
 	struct cyclades_card *card;
 	struct cyclades_port *info = tty->driver_data;
-	void __iomem *base_addr;
-	int chip, channel, index;
 	unsigned long orig_jiffies;
 	int char_time;
 
@@ -1722,13 +1695,8 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
 		timeout, char_time, jiffies);
 #endif
 	card = info->card;
-	channel = (info->line) - (card->first_line);
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-		while (readb(base_addr + (CySRER << index)) & CyTxRdy) {
+		while (cyy_readb(info, CySRER) & CyTxRdy) {
 #ifdef CY_DEBUG_WAIT_UNTIL_SENT
 			printk(KERN_DEBUG "Not clean (jiff=%lu)...", jiffies);
 #endif
@@ -1790,6 +1758,7 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
 	struct cyclades_port *info = tty->driver_data;
 	struct cyclades_card *card;
 	unsigned long flags;
+	int channel;
 
 	if (!info || serial_paranoia_check(info, tty->name, "cy_close"))
 		return;
@@ -1799,18 +1768,13 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
 	if (!tty_port_close_start(&info->port, tty, filp))
 		return;
 
+	channel = info->line - card->first_line;
 	spin_lock_irqsave(&card->card_lock, flags);
 
 	if (!cy_is_Z(card)) {
-		int channel = info->line - card->first_line;
-		int index = card->bus_index;
-		void __iomem *base_addr = card->base_addr +
-			(cy_chip_offset[channel >> 2] << index);
 		/* Stop accepting input */
-		channel &= 0x03;
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
-		cy_writeb(base_addr + (CySRER << index),
-			  readb(base_addr + (CySRER << index)) & ~CyRxData);
+		cyy_writeb(info, CyCAR, channel & 0x03);
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyRxData);
 		if (info->port.flags & ASYNC_INITIALIZED) {
 			/* Waiting for on-board buffers to be empty before
 			   closing the port */
@@ -1823,7 +1787,6 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
 		/* Waiting for on-board buffers to be empty before closing
 		   the port */
 		struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
-		int channel = info->line - card->first_line;
 		int retval;
 
 		if (readl(&ch_ctrl->flow_status) != C_FS_TXIDLE) {
@@ -2064,8 +2027,7 @@ static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty)
 {
 	struct cyclades_card *card;
 	unsigned long flags;
-	void __iomem *base_addr;
-	int chip, channel, index;
+	int channel;
 	unsigned cflag, iflag;
 	int baud, baud_rate = 0;
 	int i;
@@ -2095,9 +2057,6 @@ static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty)
 	channel = info->line - card->first_line;
 
 	if (!cy_is_Z(card)) {
-
-		index = card->bus_index;
-
 		/* baud rate */
 		baud = tty_get_baud_rate(tty);
 		if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
@@ -2208,70 +2167,67 @@ static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty)
 	    cable.  Contact Marcio Saito for details.
 	 ***********************************************/
 
-		chip = channel >> 2;
 		channel &= 0x03;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
 
 		spin_lock_irqsave(&card->card_lock, flags);
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
+		cyy_writeb(info, CyCAR, channel);
 
 		/* tx and rx baud rate */
 
-		cy_writeb(base_addr + (CyTCOR << index), info->tco);
-		cy_writeb(base_addr + (CyTBPR << index), info->tbpr);
-		cy_writeb(base_addr + (CyRCOR << index), info->rco);
-		cy_writeb(base_addr + (CyRBPR << index), info->rbpr);
+		cyy_writeb(info, CyTCOR, info->tco);
+		cyy_writeb(info, CyTBPR, info->tbpr);
+		cyy_writeb(info, CyRCOR, info->rco);
+		cyy_writeb(info, CyRBPR, info->rbpr);
 
 		/* set line characteristics  according configuration */
 
-		cy_writeb(base_addr + (CySCHR1 << index), START_CHAR(tty));
-		cy_writeb(base_addr + (CySCHR2 << index), STOP_CHAR(tty));
-		cy_writeb(base_addr + (CyCOR1 << index), info->cor1);
-		cy_writeb(base_addr + (CyCOR2 << index), info->cor2);
-		cy_writeb(base_addr + (CyCOR3 << index), info->cor3);
-		cy_writeb(base_addr + (CyCOR4 << index), info->cor4);
-		cy_writeb(base_addr + (CyCOR5 << index), info->cor5);
+		cyy_writeb(info, CySCHR1, START_CHAR(tty));
+		cyy_writeb(info, CySCHR2, STOP_CHAR(tty));
+		cyy_writeb(info, CyCOR1, info->cor1);
+		cyy_writeb(info, CyCOR2, info->cor2);
+		cyy_writeb(info, CyCOR3, info->cor3);
+		cyy_writeb(info, CyCOR4, info->cor4);
+		cyy_writeb(info, CyCOR5, info->cor5);
 
-		cyy_issue_cmd(base_addr, CyCOR_CHANGE | CyCOR1ch | CyCOR2ch |
-				CyCOR3ch, index);
+		cyy_issue_cmd(info, CyCOR_CHANGE | CyCOR1ch | CyCOR2ch |
+				CyCOR3ch);
 
 		/* !!! Is this needed? */
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
-		cy_writeb(base_addr + (CyRTPR << index),
+		cyy_writeb(info, CyCAR, channel);
+		cyy_writeb(info, CyRTPR,
 			(info->default_timeout ? info->default_timeout : 0x02));
 		/* 10ms rx timeout */
 
 		if (C_CLOCAL(tty)) {
 			/* without modem intr */
-			cy_writeb(base_addr + (CySRER << index),
-				readb(base_addr + (CySRER << index)) | CyMdmCh);
+			cyy_writeb(info, CySRER,
+					cyy_readb(info, CySRER) | CyMdmCh);
 			/* act on 1->0 modem transitions */
 			if ((cflag & CRTSCTS) && info->rflow) {
-				cy_writeb(base_addr + (CyMCOR1 << index),
+				cyy_writeb(info, CyMCOR1,
 					  (CyCTS | rflow_thr[i]));
 			} else {
-				cy_writeb(base_addr + (CyMCOR1 << index),
+				cyy_writeb(info, CyMCOR1,
 					  CyCTS);
 			}
 			/* act on 0->1 modem transitions */
-			cy_writeb(base_addr + (CyMCOR2 << index), CyCTS);
+			cyy_writeb(info, CyMCOR2, CyCTS);
 		} else {
 			/* without modem intr */
-			cy_writeb(base_addr + (CySRER << index),
-				  readb(base_addr +
-					   (CySRER << index)) | CyMdmCh);
+			cyy_writeb(info, CySRER,
+					cyy_readb(info, CySRER) | CyMdmCh);
 			/* act on 1->0 modem transitions */
 			if ((cflag & CRTSCTS) && info->rflow) {
-				cy_writeb(base_addr + (CyMCOR1 << index),
+				cyy_writeb(info, CyMCOR1,
 					  (CyDSR | CyCTS | CyRI | CyDCD |
 					   rflow_thr[i]));
 			} else {
-				cy_writeb(base_addr + (CyMCOR1 << index),
-					  CyDSR | CyCTS | CyRI | CyDCD);
+				cyy_writeb(info, CyMCOR1,
+						CyDSR | CyCTS | CyRI | CyDCD);
 			}
 			/* act on 0->1 modem transitions */
-			cy_writeb(base_addr + (CyMCOR2 << index),
-				  CyDSR | CyCTS | CyRI | CyDCD);
+			cyy_writeb(info, CyMCOR2,
+					CyDSR | CyCTS | CyRI | CyDCD);
 		}
 
 		if (i == 0)	/* baud rate is zero, turn off line */
@@ -2482,24 +2438,14 @@ check_and_exit:
  */
 static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value)
 {
-	struct cyclades_card *card;
-	int chip, channel, index;
-	unsigned char status;
+	struct cyclades_card *card = info->card;
 	unsigned int result;
 	unsigned long flags;
-	void __iomem *base_addr;
+	u8 status;
 
-	card = info->card;
-	channel = (info->line) - (card->first_line);
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
 		spin_lock_irqsave(&card->card_lock, flags);
-		status = readb(base_addr + (CySRER << index)) &
-				(CyTxRdy | CyTxMpty);
+		status = cyy_readb(info, CySRER) & (CyTxRdy | CyTxMpty);
 		spin_unlock_irqrestore(&card->card_lock, flags);
 		result = (status ? 0 : TIOCSER_TEMT);
 	} else {
@@ -2513,29 +2459,23 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file)
 {
 	struct cyclades_port *info = tty->driver_data;
 	struct cyclades_card *card;
-	void __iomem *base_addr;
-	int result, channel;
+	int result;
 
 	if (serial_paranoia_check(info, tty->name, __func__))
 		return -ENODEV;
 
 	card = info->card;
-	channel = info->line - card->first_line;
 
 	lock_kernel();
 	if (!cy_is_Z(card)) {
 		unsigned long flags;
-		unsigned char status;
-		int chip = channel >> 2;
-		int index = card->bus_index;
-
-		channel &= 0x03;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
+		int channel = info->line - card->first_line;
+		u8 status;
 
 		spin_lock_irqsave(&card->card_lock, flags);
-		cy_writeb(base_addr + (CyCAR << index), (u8)channel);
-		status = readb(base_addr + (CyMSVR1 << index));
-		status |= readb(base_addr + (CyMSVR2 << index));
+		cyy_writeb(info, CyCAR, channel & 0x03);
+		status = cyy_readb(info, CyMSVR1);
+		status |= cyy_readb(info, CyMSVR2);
 		spin_unlock_irqrestore(&card->card_lock, flags);
 
 		if (info->rtsdtr_inv) {
@@ -2689,26 +2629,16 @@ static int cy_break(struct tty_struct *tty, int break_state)
 
 static int set_threshold(struct cyclades_port *info, unsigned long value)
 {
-	struct cyclades_card *card;
-	void __iomem *base_addr;
-	int channel, chip, index;
+	struct cyclades_card *card = info->card;
 	unsigned long flags;
 
-	card = info->card;
-	channel = info->line - card->first_line;
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr =
-		    card->base_addr + (cy_chip_offset[chip] << index);
-
 		info->cor3 &= ~CyREC_FIFO;
 		info->cor3 |= value & CyREC_FIFO;
 
 		spin_lock_irqsave(&card->card_lock, flags);
-		cy_writeb(base_addr + (CyCOR3 << index), info->cor3);
-		cyy_issue_cmd(base_addr, CyCOR_CHANGE | CyCOR3ch, index);
+		cyy_writeb(info, CyCOR3, info->cor3);
+		cyy_issue_cmd(info, CyCOR_CHANGE | CyCOR3ch);
 		spin_unlock_irqrestore(&card->card_lock, flags);
 	}
 	return 0;
@@ -2717,20 +2647,10 @@ static int set_threshold(struct cyclades_port *info, unsigned long value)
 static int get_threshold(struct cyclades_port *info,
 						unsigned long __user *value)
 {
-	struct cyclades_card *card;
-	void __iomem *base_addr;
-	int channel, chip, index;
-	unsigned long tmp;
+	struct cyclades_card *card = info->card;
 
-	card = info->card;
-	channel = info->line - card->first_line;
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
-		tmp = readb(base_addr + (CyCOR3 << index)) & CyREC_FIFO;
+		u8 tmp = cyy_readb(info, CyCOR3) & CyREC_FIFO;
 		return put_user(tmp, value);
 	}
 	return 0;
@@ -2738,21 +2658,12 @@ static int get_threshold(struct cyclades_port *info,
 
 static int set_timeout(struct cyclades_port *info, unsigned long value)
 {
-	struct cyclades_card *card;
-	void __iomem *base_addr;
-	int channel, chip, index;
+	struct cyclades_card *card = info->card;
 	unsigned long flags;
 
-	card = info->card;
-	channel = info->line - card->first_line;
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
 		spin_lock_irqsave(&card->card_lock, flags);
-		cy_writeb(base_addr + (CyRTPR << index), value & 0xff);
+		cyy_writeb(info, CyRTPR, value & 0xff);
 		spin_unlock_irqrestore(&card->card_lock, flags);
 	}
 	return 0;
@@ -2761,20 +2672,10 @@ static int set_timeout(struct cyclades_port *info, unsigned long value)
 static int get_timeout(struct cyclades_port *info,
 						unsigned long __user *value)
 {
-	struct cyclades_card *card;
-	void __iomem *base_addr;
-	int channel, chip, index;
-	unsigned long tmp;
+	struct cyclades_card *card = info->card;
 
-	card = info->card;
-	channel = info->line - card->first_line;
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
-		tmp = readb(base_addr + (CyRTPR << index));
+		u8 tmp = cyy_readb(info, CyRTPR);
 		return put_user(tmp, value);
 	}
 	return 0;
@@ -3101,8 +3002,7 @@ static void cy_stop(struct tty_struct *tty)
 {
 	struct cyclades_card *cinfo;
 	struct cyclades_port *info = tty->driver_data;
-	void __iomem *base_addr;
-	int chip, channel, index;
+	int channel;
 	unsigned long flags;
 
 #ifdef CY_DEBUG_OTHER
@@ -3115,16 +3015,9 @@ static void cy_stop(struct tty_struct *tty)
 	cinfo = info->card;
 	channel = info->line - cinfo->first_line;
 	if (!cy_is_Z(cinfo)) {
-		index = cinfo->bus_index;
-		chip = channel >> 2;
-		channel &= 0x03;
-		base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index);
-
 		spin_lock_irqsave(&cinfo->card_lock, flags);
-		cy_writeb(base_addr + (CyCAR << index),
-			(u_char)(channel & 0x0003)); /* index channel */
-		cy_writeb(base_addr + (CySRER << index),
-			  readb(base_addr + (CySRER << index)) & ~CyTxRdy);
+		cyy_writeb(info, CyCAR, channel & 0x03);
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyTxRdy);
 		spin_unlock_irqrestore(&cinfo->card_lock, flags);
 	}
 }				/* cy_stop */
@@ -3133,8 +3026,7 @@ static void cy_start(struct tty_struct *tty)
 {
 	struct cyclades_card *cinfo;
 	struct cyclades_port *info = tty->driver_data;
-	void __iomem *base_addr;
-	int chip, channel, index;
+	int channel;
 	unsigned long flags;
 
 #ifdef CY_DEBUG_OTHER
@@ -3146,17 +3038,10 @@ static void cy_start(struct tty_struct *tty)
 
 	cinfo = info->card;
 	channel = info->line - cinfo->first_line;
-	index = cinfo->bus_index;
 	if (!cy_is_Z(cinfo)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index);
-
 		spin_lock_irqsave(&cinfo->card_lock, flags);
-		cy_writeb(base_addr + (CyCAR << index),
-			(u_char) (channel & 0x0003));	/* index channel */
-		cy_writeb(base_addr + (CySRER << index),
-			  readb(base_addr + (CySRER << index)) | CyTxRdy);
+		cyy_writeb(info, CyCAR, channel & 0x03);
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyTxRdy);
 		spin_unlock_irqrestore(&cinfo->card_lock, flags);
 	}
 }				/* cy_start */
@@ -3185,18 +3070,13 @@ static int cyy_carrier_raised(struct tty_port *port)
 	struct cyclades_port *info = container_of(port, struct cyclades_port,
 			port);
 	struct cyclades_card *cinfo = info->card;
-	void __iomem *base = cinfo->base_addr;
 	unsigned long flags;
 	int channel = info->line - cinfo->first_line;
-	int chip = channel >> 2, index = cinfo->bus_index;
 	u32 cd;
 
-	channel &= 0x03;
-	base += cy_chip_offset[chip] << index;
-
 	spin_lock_irqsave(&cinfo->card_lock, flags);
-	cy_writeb(base + (CyCAR << index), (u8)channel);
-	cd = readb(base + (CyMSVR1 << index)) & CyDCD;
+	cyy_writeb(info, CyCAR, channel & 0x03);
+	cd = cyy_readb(info, CyMSVR1) & CyDCD;
 	spin_unlock_irqrestore(&cinfo->card_lock, flags);
 
 	return cd;
@@ -3326,9 +3206,9 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
 			info->cor3 = 0x08;	/* _very_ small rcv threshold */
 
 			chip_number = channel / CyPORTS_PER_CHIP;
-			info->chip_rev = readb(cinfo->base_addr +
-				      (cy_chip_offset[chip_number] << index) +
-				      (CyGFRCR << index));
+			info->u.cyy.base_addr = cinfo->base_addr +
+				(cy_chip_offset[chip_number] << index);
+			info->chip_rev = cyy_readb(info, CyGFRCR);
 
 			if (info->chip_rev >= CD1400_REV_J) {
 				/* It is a CD1400 rev. J or later */
include/linux/cyclades.h +1 -1
index 1eb87a6..bbebef7 100644
@@ -544,7 +544,7 @@ struct cyclades_port {
 	struct cyclades_card	*card;
 	union {
 		struct {
-			int filler;
+			void __iomem *base_addr;
 		} cyy;
 		struct {
 			struct CH_CTRL __iomem	*ch_ctrl;
Signature · 1 line
1.6.4.2
#20 lore raw

PATCH 20/79 cyclades: remove more duplicated code

In reply to Greg KH

From: Jiri Slaby <[email protected]>

Remove duplicated code from cy_set_line_char. There were 2 if branches with same contents except flags.

Branch only for the flags computation and use them in the only copy of the code.

---
 drivers/char/cyclades.c |   45 ++++++++++++++-------------------------------
 1 files changed, 14 insertions(+), 31 deletions(-)
drivers/char/cyclades.c +14 -31
index cf2874a..f518e0b 100644
@@ -2057,6 +2057,8 @@ static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty)
 	channel = info->line - card->first_line;
 
 	if (!cy_is_Z(card)) {
+		u32 cflags;
+
 		/* baud rate */
 		baud = tty_get_baud_rate(tty);
 		if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
@@ -2198,37 +2200,18 @@ static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty)
 			(info->default_timeout ? info->default_timeout : 0x02));
 		/* 10ms rx timeout */
 
-		if (C_CLOCAL(tty)) {
-			/* without modem intr */
-			cyy_writeb(info, CySRER,
-					cyy_readb(info, CySRER) | CyMdmCh);
-			/* act on 1->0 modem transitions */
-			if ((cflag & CRTSCTS) && info->rflow) {
-				cyy_writeb(info, CyMCOR1,
-					  (CyCTS | rflow_thr[i]));
-			} else {
-				cyy_writeb(info, CyMCOR1,
-					  CyCTS);
-			}
-			/* act on 0->1 modem transitions */
-			cyy_writeb(info, CyMCOR2, CyCTS);
-		} else {
-			/* without modem intr */
-			cyy_writeb(info, CySRER,
-					cyy_readb(info, CySRER) | CyMdmCh);
-			/* act on 1->0 modem transitions */
-			if ((cflag & CRTSCTS) && info->rflow) {
-				cyy_writeb(info, CyMCOR1,
-					  (CyDSR | CyCTS | CyRI | CyDCD |
-					   rflow_thr[i]));
-			} else {
-				cyy_writeb(info, CyMCOR1,
-						CyDSR | CyCTS | CyRI | CyDCD);
-			}
-			/* act on 0->1 modem transitions */
-			cyy_writeb(info, CyMCOR2,
-					CyDSR | CyCTS | CyRI | CyDCD);
-		}
+		cflags = CyCTS;
+		if (!C_CLOCAL(tty))
+			cflags |= CyDSR | CyRI | CyDCD;
+		/* without modem intr */
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyMdmCh);
+		/* act on 1->0 modem transitions */
+		if ((cflag & CRTSCTS) && info->rflow)
+			cyy_writeb(info, CyMCOR1, cflags | rflow_thr[i]);
+		else
+			cyy_writeb(info, CyMCOR1, cflags);
+		/* act on 0->1 modem transitions */
+		cyy_writeb(info, CyMCOR2, cflags);
 
 		if (i == 0)	/* baud rate is zero, turn off line */
 			cyy_change_rts_dtr(info, 0, TIOCM_DTR);
Signature · 1 line
1.6.4.2
#21 lore raw

PATCH 21/79 slip: Clean up create and destroy

In reply to Greg KH

From: Alan Cox <[email protected]>

The network layer now has a destructor we can hook to clean up the slip devices array. That needs us to initiate unregister events in the right places which with the current tty layer we can do, and with network refcounting is safe to do.

---
 drivers/net/slip.c |   96 ++++++++++++---------------------------------------
 1 files changed, 23 insertions(+), 73 deletions(-)
drivers/net/slip.c +23 -73
index 26f6ee9..e17c535 100644
@@ -616,6 +616,14 @@ static void sl_uninit(struct net_device *dev)
 	sl_free_bufs(sl);
 }
 
+/* Hook the destructor so we can free slip devices at the right point in time */
+static void sl_free_netdev(struct net_device *dev)
+{
+	int i = dev->base_addr;
+	free_netdev(dev);
+	slip_devs[i] = NULL;
+}
+
 static const struct net_device_ops sl_netdev_ops = {
 	.ndo_init		= sl_init,
 	.ndo_uninit	  	= sl_uninit,
@@ -634,7 +642,7 @@ static const struct net_device_ops sl_netdev_ops = {
 static void sl_setup(struct net_device *dev)
 {
 	dev->netdev_ops		= &sl_netdev_ops;
-	dev->destructor		= free_netdev;
+	dev->destructor		= sl_free_netdev;
 
 	dev->hard_header_len	= 0;
 	dev->addr_len		= 0;
@@ -712,8 +720,6 @@ static void sl_sync(void)
 static struct slip *sl_alloc(dev_t line)
 {
 	int i;
-	int sel = -1;
-	int score = -1;
 	struct net_device *dev = NULL;
 	struct slip       *sl;
 
@@ -724,55 +730,7 @@ static struct slip *sl_alloc(dev_t line)
 		dev = slip_devs[i];
 		if (dev == NULL)
 			break;
-
-		sl = netdev_priv(dev);
-		if (sl->leased) {
-			if (sl->line != line)
-				continue;
-			if (sl->tty)
-				return NULL;
-
-			/* Clear ESCAPE & ERROR flags */
-			sl->flags &= (1 << SLF_INUSE);
-			return sl;
-		}
-
-		if (sl->tty)
-			continue;
-
-		if (current->pid == sl->pid) {
-			if (sl->line == line && score < 3) {
-				sel = i;
-				score = 3;
-				continue;
-			}
-			if (score < 2) {
-				sel = i;
-				score = 2;
-			}
-			continue;
-		}
-		if (sl->line == line && score < 1) {
-			sel = i;
-			score = 1;
-			continue;
-		}
-		if (score < 0) {
-			sel = i;
-			score = 0;
-		}
-	}
-
-	if (sel >= 0) {
-		i = sel;
-		dev = slip_devs[i];
-		if (score > 1) {
-			sl = netdev_priv(dev);
-			sl->flags &= (1 << SLF_INUSE);
-			return sl;
-		}
 	}
-
 	/* Sorry, too many, all slots in use */
 	if (i >= slip_maxdev)
 		return NULL;
@@ -909,30 +867,13 @@ err_exit:
 }
 
 /*
-
-  FIXME: 1,2 are fixed 3 was never true anyway.
-
-   Let me to blame a bit.
-   1. TTY module calls this funstion on soft interrupt.
-   2. TTY module calls this function WITH MASKED INTERRUPTS!
-   3. TTY module does not notify us about line discipline
-      shutdown,
-
-   Seems, now it is clean. The solution is to consider netdevice and
-   line discipline sides as two independent threads.
-
-   By-product (not desired): sl? does not feel hangups and remains open.
-   It is supposed, that user level program (dip, diald, slattach...)
-   will catch SIGHUP and make the rest of work.
-
-   I see no way to make more with current tty code. --ANK
- */
-
-/*
  * Close down a SLIP channel.
  * This means flushing out any pending queues, and then returning. This
  * call is serialized against other ldisc functions.
+ *
+ * We also use this method fo a hangup event
  */
+
 static void slip_close(struct tty_struct *tty)
 {
 	struct slip *sl = tty->disc_data;
@@ -951,10 +892,16 @@ static void slip_close(struct tty_struct *tty)
 	del_timer_sync(&sl->keepalive_timer);
 	del_timer_sync(&sl->outfill_timer);
 #endif
-
-	/* Count references from TTY module */
+	/* Flush network side */
+	unregister_netdev(sl->dev);
+	/* This will complete via sl_free_netdev */
 }
 
+static int slip_hangup(struct tty_struct *tty)
+{
+	slip_close(tty);
+	return 0;
+}
  /************************************************************************
   *			STANDARD SLIP ENCAPSULATION		  	 *
   ************************************************************************/
@@ -1311,6 +1258,7 @@ static struct tty_ldisc_ops sl_ldisc = {
 	.name 		= "slip",
 	.open 		= slip_open,
 	.close	 	= slip_close,
+	.hangup	 	= slip_hangup,
 	.ioctl		= slip_ioctl,
 	.receive_buf	= slip_receive_buf,
 	.write_wakeup	= slip_write_wakeup,
@@ -1384,6 +1332,8 @@ static void __exit slip_exit(void)
 		}
 	} while (busy && time_before(jiffies, timeout));
 
+	/* FIXME: hangup is async so we should wait when doing this second
+	   phase */
 
 	for (i = 0; i < slip_maxdev; i++) {
 		dev = slip_devs[i];
Signature · 1 line
1.6.4.2
#22 lore raw

PATCH 22/79 kfifo: Use "const" definitions

In reply to Greg KH

From: Alan Cox <[email protected]>

Currently kfifo cannot be used by parts of the kernel that use "const" properly as kfifo itself does not use const for passed data blocks which are indeed const.

---
 include/linux/kfifo.h |    4 ++--
 kernel/kfifo.c        |    2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)
include/linux/kfifo.h +2 -2
index 29f62e1..ad6bdf5 100644
@@ -38,7 +38,7 @@ extern struct kfifo *kfifo_alloc(unsigned int size, gfp_t gfp_mask,
 				 spinlock_t *lock);
 extern void kfifo_free(struct kfifo *fifo);
 extern unsigned int __kfifo_put(struct kfifo *fifo,
-				unsigned char *buffer, unsigned int len);
+				const unsigned char *buffer, unsigned int len);
 extern unsigned int __kfifo_get(struct kfifo *fifo,
 				unsigned char *buffer, unsigned int len);
 
@@ -77,7 +77,7 @@ static inline void kfifo_reset(struct kfifo *fifo)
  * bytes copied.
  */
 static inline unsigned int kfifo_put(struct kfifo *fifo,
-				     unsigned char *buffer, unsigned int len)
+				const unsigned char *buffer, unsigned int len)
 {
 	unsigned long flags;
 	unsigned int ret;
kernel/kfifo.c +1 -1
index 26539e3..3765ff3 100644
@@ -117,7 +117,7 @@ EXPORT_SYMBOL(kfifo_free);
  * writer, you don't need extra locking to use these functions.
  */
 unsigned int __kfifo_put(struct kfifo *fifo,
-			 unsigned char *buffer, unsigned int len)
+			const unsigned char *buffer, unsigned int len)
 {
 	unsigned int l;
 
Signature · 1 line
1.6.4.2
#23 lore raw

PATCH 23/79 MOS7720 has no tiocmget method

In reply to Greg KH

From: Kees Schoenmakers <[email protected]>

Fix the tiocmget/mset handling on the mos7720 USB serial port.

[Minor space reformatting for coding style - Alan]

---
 drivers/usb/serial/mos7720.c |  101 ++++++++++++++++++++++++++---------------
 1 files changed, 64 insertions(+), 37 deletions(-)
drivers/usb/serial/mos7720.c +64 -37
index ccd4dd3..759cdd5 100644
@@ -85,7 +85,7 @@ static int debug;
 #define MOSCHIP_DEVICE_ID_7720		0x7720
 #define MOSCHIP_DEVICE_ID_7715		0x7715
 
-static struct usb_device_id moschip_port_id_table [] = {
+static struct usb_device_id moschip_port_id_table[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7720) },
 	{ } /* terminating entry */
 };
@@ -1264,6 +1264,67 @@ static int get_lsr_info(struct tty_struct *tty,
 	return 0;
 }
 
+static int mos7720_tiocmget(struct tty_struct *tty, struct file *file)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
+	unsigned int result = 0;
+	unsigned int mcr ;
+	unsigned int msr ;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	mcr = mos7720_port->shadowMCR;
+	msr = mos7720_port->shadowMSR;
+
+	result = ((mcr & UART_MCR_DTR)  ? TIOCM_DTR : 0)   /* 0x002 */
+	  | ((mcr & UART_MCR_RTS)   ? TIOCM_RTS : 0)   /* 0x004 */
+	  | ((msr & UART_MSR_CTS)   ? TIOCM_CTS : 0)   /* 0x020 */
+	  | ((msr & UART_MSR_DCD)   ? TIOCM_CAR : 0)   /* 0x040 */
+	  | ((msr & UART_MSR_RI)    ? TIOCM_RI :  0)   /* 0x080 */
+	  | ((msr & UART_MSR_DSR)   ? TIOCM_DSR : 0);  /* 0x100 */
+
+	dbg("%s -- %x", __func__, result);
+
+	return result;
+}
+
+static int mos7720_tiocmset(struct tty_struct *tty, struct file *file,
+					unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
+	unsigned int mcr ;
+	unsigned char lmcr;
+
+	dbg("%s - port %d", __func__, port->number);
+	dbg("he was at tiocmget");
+
+	mcr = mos7720_port->shadowMCR;
+
+	if (set & TIOCM_RTS)
+		mcr |= UART_MCR_RTS;
+	if (set & TIOCM_DTR)
+		mcr |= UART_MCR_DTR;
+	if (set & TIOCM_LOOP)
+		mcr |= UART_MCR_LOOP;
+
+	if (clear & TIOCM_RTS)
+		mcr &= ~UART_MCR_RTS;
+	if (clear & TIOCM_DTR)
+		mcr &= ~UART_MCR_DTR;
+	if (clear & TIOCM_LOOP)
+		mcr &= ~UART_MCR_LOOP;
+
+	mos7720_port->shadowMCR = mcr;
+	lmcr = mos7720_port->shadowMCR;
+
+	send_mos_cmd(port->serial, MOS_WRITE,
+		port->number - port->serial->minor, UART_MCR, &lmcr);
+
+	return 0;
+}
+
 static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
 			  unsigned int __user *value)
 {
@@ -1301,14 +1362,6 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
 			mcr &= ~UART_MCR_LOOP;
 		break;
 
-	case TIOCMSET:
-		/* turn off the RTS and DTR and LOOPBACK
-		 * and then only turn on what was asked to */
-		mcr &=  ~(UART_MCR_RTS | UART_MCR_DTR | UART_MCR_LOOP);
-		mcr |= ((arg & TIOCM_RTS) ? UART_MCR_RTS : 0);
-		mcr |= ((arg & TIOCM_DTR) ? UART_MCR_DTR : 0);
-		mcr |= ((arg & TIOCM_LOOP) ? UART_MCR_LOOP : 0);
-		break;
 	}
 
 	mos7720_port->shadowMCR = mcr;
@@ -1320,28 +1373,6 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
 	return 0;
 }
 
-static int get_modem_info(struct moschip_port *mos7720_port,
-			  unsigned int __user *value)
-{
-	unsigned int result = 0;
-	unsigned int msr = mos7720_port->shadowMSR;
-	unsigned int mcr = mos7720_port->shadowMCR;
-
-	result = ((mcr & UART_MCR_DTR)	? TIOCM_DTR: 0)	  /* 0x002 */
-		  | ((mcr & UART_MCR_RTS)	? TIOCM_RTS: 0)   /* 0x004 */
-		  | ((msr & UART_MSR_CTS)	? TIOCM_CTS: 0)   /* 0x020 */
-		  | ((msr & UART_MSR_DCD)	? TIOCM_CAR: 0)   /* 0x040 */
-		  | ((msr & UART_MSR_RI)	? TIOCM_RI:  0)   /* 0x080 */
-		  | ((msr & UART_MSR_DSR)	? TIOCM_DSR: 0);  /* 0x100 */
-
-
-	dbg("%s -- %x", __func__, result);
-
-	if (copy_to_user(value, &result, sizeof(int)))
-		return -EFAULT;
-	return 0;
-}
-
 static int get_serial_info(struct moschip_port *mos7720_port,
 			   struct serial_struct __user *retinfo)
 {
@@ -1392,17 +1423,11 @@ static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
 	/* FIXME: These should be using the mode methods */
 	case TIOCMBIS:
 	case TIOCMBIC:
-	case TIOCMSET:
 		dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET",
 					__func__, port->number);
 		return set_modem_info(mos7720_port, cmd,
 				      (unsigned int __user *)arg);
 
-	case TIOCMGET:
-		dbg("%s (%d) TIOCMGET", __func__,  port->number);
-		return get_modem_info(mos7720_port,
-				      (unsigned int __user *)arg);
-
 	case TIOCGSERIAL:
 		dbg("%s (%d) TIOCGSERIAL", __func__,  port->number);
 		return get_serial_info(mos7720_port,
@@ -1557,6 +1582,8 @@ static struct usb_serial_driver moschip7720_2port_driver = {
 	.attach			= mos7720_startup,
 	.release		= mos7720_release,
 	.ioctl			= mos7720_ioctl,
+	.tiocmget		= mos7720_tiocmget,
+	.tiocmset		= mos7720_tiocmset,
 	.set_termios		= mos7720_set_termios,
 	.write			= mos7720_write,
 	.write_room		= mos7720_write_room,
Signature · 1 line
1.6.4.2
#24 lore raw

PATCH 24/79 tty: usb_serial_mos7720: Fix get_lsr_info

In reply to Greg KH

From: Kees Schoenmakers <[email protected]>

I made a correction for get_lsr_info, now it returns some meaningful information. I tested it with two simultaneous simplex modem channels.

it is attached

---
 drivers/usb/serial/mos7720.c |   19 +++++++++++++++----
 1 files changed, 15 insertions(+), 4 deletions(-)
drivers/usb/serial/mos7720.c +15 -4
index 759cdd5..4342a8a 100644
@@ -378,10 +378,14 @@ static int mos7720_open(struct tty_struct *tty,
 	 /* Initialize MCS7720 -- Write Init values to corresponding Registers
 	  *
 	  * Register Index
+	  * 0 : THR/RHR
 	  * 1 : IER
 	  * 2 : FCR
 	  * 3 : LCR
 	  * 4 : MCR
+	  * 5 : LSR
+	  * 6 : MSR
+	  * 7 : SPR
 	  *
 	  * 0x08 : SP1/2 Control Reg
 	  */
@@ -1250,15 +1254,22 @@ static void mos7720_set_termios(struct tty_struct *tty,
 static int get_lsr_info(struct tty_struct *tty,
 		struct moschip_port *mos7720_port, unsigned int __user *value)
 {
-	int count;
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned int result = 0;
+	unsigned char data = 0;
+	int port_number = port->number - port->serial->minor;
+	int count;
 
 	count = mos7720_chars_in_buffer(tty);
 	if (count == 0) {
-		dbg("%s -- Empty", __func__);
-		result = TIOCSER_TEMT;
+		send_mos_cmd(port->serial, MOS_READ, port_number,
+							UART_LSR, &data);
+		if ((data & (UART_LSR_TEMT | UART_LSR_THRE))
+					== (UART_LSR_TEMT | UART_LSR_THRE)) {
+			dbg("%s -- Empty", __func__);
+			result = TIOCSER_TEMT;
+		}
 	}
-
 	if (copy_to_user(value, &result, sizeof(int)))
 		return -EFAULT;
 	return 0;
Signature · 1 line
1.6.4.2
#25 lore raw

Re: [PATCH 24/79] tty: usb_serial_mos7720: Fix get_lsr_info

Gentlemen,

As of version 2.6.32.5 this patch has not made it into the kernel sources. Any reason for this? It is a pity for people who knowingly or unknowingly run into this effect in the driver.

kind regards

Kees

Quoted 60 lines · On Saturday 19 September 2009 23:36:29 Greg Kroah-Hartman wrote:

From: Kees Schoenmakers <[email protected]>

I made a correction for get_lsr_info, now it returns some meaningful information. I tested it with two simultaneous simplex modem channels.

it is attached

---
 drivers/usb/serial/mos7720.c |   19 +++++++++++++++----
 1 files changed, 15 insertions(+), 4 deletions(-)
drivers/usb/serial/mos7720.c +15 -4
index 759cdd5..4342a8a 100644
@@ -378,10 +378,14 @@ static int mos7720_open(struct tty_struct *tty,
 	 /* Initialize MCS7720 -- Write Init values to corresponding Registers
 	  *
 	  * Register Index
+	  * 0 : THR/RHR
 	  * 1 : IER
 	  * 2 : FCR
 	  * 3 : LCR
 	  * 4 : MCR
+	  * 5 : LSR
+	  * 6 : MSR
+	  * 7 : SPR
 	  *
 	  * 0x08 : SP1/2 Control Reg
 	  */
@@ -1250,15 +1254,22 @@ static void mos7720_set_termios(struct tty_struct
 *tty, static int get_lsr_info(struct tty_struct *tty,
 		struct moschip_port *mos7720_port, unsigned int __user *value)
 {
-	int count;
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned int result = 0;
+	unsigned char data = 0;
+	int port_number = port->number - port->serial->minor;
+	int count;
 
 	count = mos7720_chars_in_buffer(tty);
 	if (count == 0) {
-		dbg("%s -- Empty", __func__);
-		result = TIOCSER_TEMT;
+		send_mos_cmd(port->serial, MOS_READ, port_number,
+							UART_LSR, &data);
+		if ((data & (UART_LSR_TEMT | UART_LSR_THRE))
+					== (UART_LSR_TEMT | UART_LSR_THRE)) {
+			dbg("%s -- Empty", __func__);
+			result = TIOCSER_TEMT;
+		}
 	}
-
 	if (copy_to_user(value, &result, sizeof(int)))
 		return -EFAULT;
 	return 0;
#26 lore raw

Re: [PATCH 24/79] tty: usb_serial_mos7720: Fix get_lsr_info

In reply to Greg Kroah-Hartman

Gentlemen,

Drop my previous email, it has the wrong subject

kind regards

Kees

Quoted 60 lines · On Saturday 19 September 2009 23:36:29 Greg Kroah-Hartman wrote:

From: Kees Schoenmakers <[email protected]>

I made a correction for get_lsr_info, now it returns some meaningful information. I tested it with two simultaneous simplex modem channels.

it is attached

---
 drivers/usb/serial/mos7720.c |   19 +++++++++++++++----
 1 files changed, 15 insertions(+), 4 deletions(-)
drivers/usb/serial/mos7720.c +15 -4
index 759cdd5..4342a8a 100644
@@ -378,10 +378,14 @@ static int mos7720_open(struct tty_struct *tty,
 	 /* Initialize MCS7720 -- Write Init values to corresponding Registers
 	  *
 	  * Register Index
+	  * 0 : THR/RHR
 	  * 1 : IER
 	  * 2 : FCR
 	  * 3 : LCR
 	  * 4 : MCR
+	  * 5 : LSR
+	  * 6 : MSR
+	  * 7 : SPR
 	  *
 	  * 0x08 : SP1/2 Control Reg
 	  */
@@ -1250,15 +1254,22 @@ static void mos7720_set_termios(struct tty_struct
 *tty, static int get_lsr_info(struct tty_struct *tty,
 		struct moschip_port *mos7720_port, unsigned int __user *value)
 {
-	int count;
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned int result = 0;
+	unsigned char data = 0;
+	int port_number = port->number - port->serial->minor;
+	int count;
 
 	count = mos7720_chars_in_buffer(tty);
 	if (count == 0) {
-		dbg("%s -- Empty", __func__);
-		result = TIOCSER_TEMT;
+		send_mos_cmd(port->serial, MOS_READ, port_number,
+							UART_LSR, &data);
+		if ((data & (UART_LSR_TEMT | UART_LSR_THRE))
+					== (UART_LSR_TEMT | UART_LSR_THRE)) {
+			dbg("%s -- Empty", __func__);
+			result = TIOCSER_TEMT;
+		}
 	}
-
 	if (copy_to_user(value, &result, sizeof(int)))
 		return -EFAULT;
 	return 0;
#27 lore raw

PATCH 25/79 tty: Fix a typo noted in passing

In reply to Greg KH

From: Alan Cox <[email protected]>

---
 drivers/char/tty_io.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/char/tty_io.c +1 -1
index a3afa0c..9384480 100644
@@ -2085,7 +2085,7 @@ static int tioccons(struct file *file)
  *	the generic functionality existed. This piece of history is preserved
  *	in the expected tty API of posix OS's.
  *
- *	Locking: none, the open fle handle ensures it won't go away.
+ *	Locking: none, the open file handle ensures it won't go away.
  */
 
 static int fionbio(struct file *file, int __user *p)
Signature · 1 line
1.6.4.2
#28 lore raw

PATCH 26/79 mos7840: remove old dead modem logic

In reply to Greg KH

From: Alan Cox <[email protected]>

The modem ioctls are not routed via the ioctl method so kill the old dead code. The correct code is also already present and hooked in.

---
 drivers/usb/serial/mos7840.c |  115 ------------------------------------------
 1 files changed, 0 insertions(+), 115 deletions(-)
drivers/usb/serial/mos7840.c +0 -115
index 270009a..b93f0f9 100644
@@ -2134,106 +2134,6 @@ static int mos7840_get_lsr_info(struct tty_struct *tty,
 }
 
 /*****************************************************************************
- * mos7840_set_modem_info
- *      function to set modem info
- *****************************************************************************/
-
-/* FIXME: Should be using the model control hooks */
-
-static int mos7840_set_modem_info(struct moschip_port *mos7840_port,
-				  unsigned int cmd, unsigned int __user *value)
-{
-	unsigned int mcr;
-	unsigned int arg;
-	__u16 Data;
-	int status;
-	struct usb_serial_port *port;
-
-	if (mos7840_port == NULL)
-		return -1;
-
-	port = (struct usb_serial_port *)mos7840_port->port;
-	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Invalid port");
-		return -1;
-	}
-
-	mcr = mos7840_port->shadowMCR;
-
-	if (copy_from_user(&arg, value, sizeof(int)))
-		return -EFAULT;
-
-	switch (cmd) {
-	case TIOCMBIS:
-		if (arg & TIOCM_RTS)
-			mcr |= MCR_RTS;
-		if (arg & TIOCM_DTR)
-			mcr |= MCR_RTS;
-		if (arg & TIOCM_LOOP)
-			mcr |= MCR_LOOPBACK;
-		break;
-
-	case TIOCMBIC:
-		if (arg & TIOCM_RTS)
-			mcr &= ~MCR_RTS;
-		if (arg & TIOCM_DTR)
-			mcr &= ~MCR_RTS;
-		if (arg & TIOCM_LOOP)
-			mcr &= ~MCR_LOOPBACK;
-		break;
-
-	case TIOCMSET:
-		/* turn off the RTS and DTR and LOOPBACK
-		 * and then only turn on what was asked to */
-		mcr &= ~(MCR_RTS | MCR_DTR | MCR_LOOPBACK);
-		mcr |= ((arg & TIOCM_RTS) ? MCR_RTS : 0);
-		mcr |= ((arg & TIOCM_DTR) ? MCR_DTR : 0);
-		mcr |= ((arg & TIOCM_LOOP) ? MCR_LOOPBACK : 0);
-		break;
-	}
-
-	lock_kernel();
-	mos7840_port->shadowMCR = mcr;
-
-	Data = mos7840_port->shadowMCR;
-	status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-	unlock_kernel();
-	if (status < 0) {
-		dbg("setting MODEM_CONTROL_REGISTER Failed");
-		return -1;
-	}
-
-	return 0;
-}
-
-/*****************************************************************************
- * mos7840_get_modem_info
- *      function to get modem info
- *****************************************************************************/
-
-static int mos7840_get_modem_info(struct moschip_port *mos7840_port,
-				  unsigned int __user *value)
-{
-	unsigned int result = 0;
-	__u16 msr;
-	unsigned int mcr = mos7840_port->shadowMCR;
-        mos7840_get_uart_reg(mos7840_port->port,
-						MODEM_STATUS_REGISTER, &msr);
-	result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)	/* 0x002 */
-	    |((mcr & MCR_RTS) ? TIOCM_RTS : 0)	/* 0x004 */
-	    |((msr & MOS7840_MSR_CTS) ? TIOCM_CTS : 0)	/* 0x020 */
-	    |((msr & MOS7840_MSR_CD) ? TIOCM_CAR : 0)	/* 0x040 */
-	    |((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0)	/* 0x080 */
-	    |((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0);	/* 0x100 */
-
-	dbg("%s -- %x", __func__, result);
-
-	if (copy_to_user(value, &result, sizeof(int)))
-		return -EFAULT;
-	return 0;
-}
-
-/*****************************************************************************
  * mos7840_get_serial_info
  *      function to get information about serial port
  *****************************************************************************/
@@ -2281,7 +2181,6 @@ static int mos7840_ioctl(struct tty_struct *tty, struct file *file,
 	struct async_icount cnow;
 	struct async_icount cprev;
 	struct serial_icounter_struct icount;
-	int mosret = 0;
 
 	if (mos7840_port_paranoia_check(port, __func__)) {
 		dbg("%s", "Invalid port");
@@ -2303,20 +2202,6 @@ static int mos7840_ioctl(struct tty_struct *tty, struct file *file,
 		return mos7840_get_lsr_info(tty, argp);
 		return 0;
 
-	/* FIXME: use the modem hooks and remove this */
-	case TIOCMBIS:
-	case TIOCMBIC:
-	case TIOCMSET:
-		dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __func__,
-		    port->number);
-		mosret =
-		    mos7840_set_modem_info(mos7840_port, cmd, argp);
-		return mosret;
-
-	case TIOCMGET:
-		dbg("%s (%d) TIOCMGET", __func__, port->number);
-		return mos7840_get_modem_info(mos7840_port, argp);
-
 	case TIOCGSERIAL:
 		dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
 		return mos7840_get_serial_info(mos7840_port, argp);
Signature · 1 line
1.6.4.2
#29 lore raw

PATCH 27/79 serial: 8250: add IRQ trigger support

In reply to Greg KH

From: Vikram Pandita <[email protected]>

There is currently no provision for passing IRQ trigger flags for serial IRQs with triggering requirements (such as GPIO IRQs)

This patch adds irqflags to plat_serial8250_port that can be passed from board file to reqest_irq() of 8250 driver

Changes are backward compatible with boards passing UPF_SHARE_IRQ flag

Tested on Zoom2 board that has IRQF_TRIGGER_RISING requirement for 8250 irq

[Moved new flag to end to fix bugs in the original with the old_serial array

	-- Alan]
---
 drivers/serial/8250.c       |   14 +++++++++-----
 drivers/serial/8250.h       |    1 +
 include/linux/serial_8250.h |    1 +
 include/linux/serial_core.h |    1 +
 4 files changed, 12 insertions(+), 5 deletions(-)
drivers/serial/8250.c +9 -5
index fb867a9..83168a6 100644
@@ -1677,7 +1677,7 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
 		INIT_LIST_HEAD(&up->list);
 		i->head = &up->list;
 		spin_unlock_irq(&i->lock);
-
+		irq_flags |= up->port.irqflags;
 		ret = request_irq(up->port.irq, serial8250_interrupt,
 				  irq_flags, "serial", i);
 		if (ret < 0)
@@ -2026,7 +2026,7 @@ static int serial8250_startup(struct uart_port *port)
 		 * allow register changes to become visible.
 		 */
 		spin_lock_irqsave(&up->port.lock, flags);
-		if (up->port.flags & UPF_SHARE_IRQ)
+		if (up->port.irqflags & IRQF_SHARED)
 			disable_irq_nosync(up->port.irq);
 
 		wait_for_xmitr(up, UART_LSR_THRE);
@@ -2039,7 +2039,7 @@ static int serial8250_startup(struct uart_port *port)
 		iir = serial_in(up, UART_IIR);
 		serial_out(up, UART_IER, 0);
 
-		if (up->port.flags & UPF_SHARE_IRQ)
+		if (up->port.irqflags & IRQF_SHARED)
 			enable_irq(up->port.irq);
 		spin_unlock_irqrestore(&up->port.lock, flags);
 
@@ -2671,6 +2671,7 @@ static void __init serial8250_isa_init_ports(void)
 	     i++, up++) {
 		up->port.iobase   = old_serial_port[i].port;
 		up->port.irq      = irq_canonicalize(old_serial_port[i].irq);
+		up->port.irqflags = old_serial_port[i].irqflags;
 		up->port.uartclk  = old_serial_port[i].baud_base * 16;
 		up->port.flags    = old_serial_port[i].flags;
 		up->port.hub6     = old_serial_port[i].hub6;
@@ -2679,7 +2680,7 @@ static void __init serial8250_isa_init_ports(void)
 		up->port.regshift = old_serial_port[i].iomem_reg_shift;
 		set_io_from_upio(&up->port);
 		if (share_irqs)
-			up->port.flags |= UPF_SHARE_IRQ;
+			up->port.irqflags |= IRQF_SHARED;
 	}
 }
 
@@ -2869,6 +2870,7 @@ int __init early_serial_setup(struct uart_port *port)
 	p->iobase       = port->iobase;
 	p->membase      = port->membase;
 	p->irq          = port->irq;
+	p->irqflags     = port->irqflags;
 	p->uartclk      = port->uartclk;
 	p->fifosize     = port->fifosize;
 	p->regshift     = port->regshift;
@@ -2942,6 +2944,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
 		port.iobase		= p->iobase;
 		port.membase		= p->membase;
 		port.irq		= p->irq;
+		port.irqflags		= p->irqflags;
 		port.uartclk		= p->uartclk;
 		port.regshift		= p->regshift;
 		port.iotype		= p->iotype;
@@ -2954,7 +2957,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
 		port.serial_out		= p->serial_out;
 		port.dev		= &dev->dev;
 		if (share_irqs)
-			port.flags |= UPF_SHARE_IRQ;
+			port.irqflags |= IRQF_SHARED;
 		ret = serial8250_register_port(&port);
 		if (ret < 0) {
 			dev_err(&dev->dev, "unable to register port at index %d "
@@ -3096,6 +3099,7 @@ int serial8250_register_port(struct uart_port *port)
 		uart->port.iobase       = port->iobase;
 		uart->port.membase      = port->membase;
 		uart->port.irq          = port->irq;
+		uart->port.irqflags     = port->irqflags;
 		uart->port.uartclk      = port->uartclk;
 		uart->port.fifosize     = port->fifosize;
 		uart->port.regshift     = port->regshift;
drivers/serial/8250.h +1 -0
index 5202603..6e19ea3 100644
@@ -25,6 +25,7 @@ struct old_serial_port {
 	unsigned char io_type;
 	unsigned char *iomem_base;
 	unsigned short iomem_reg_shift;
+	unsigned long irqflags;
 };
 
 /*
include/linux/serial_8250.h +1 -0
index d4d2a78..fb46aba 100644
@@ -22,6 +22,7 @@ struct plat_serial8250_port {
 	void __iomem	*membase;	/* ioremap cookie or NULL */
 	resource_size_t	mapbase;	/* resource base */
 	unsigned int	irq;		/* interrupt number */
+	unsigned long	irqflags;	/* request_irq flags */
 	unsigned int	uartclk;	/* UART clock rate */
 	void            *private_data;
 	unsigned char	regshift;	/* register shift */
include/linux/serial_core.h +1 -0
index 23d2fb0..3cd255f 100644
@@ -265,6 +265,7 @@ struct uart_port {
 	unsigned int		(*serial_in)(struct uart_port *, int);
 	void			(*serial_out)(struct uart_port *, int, int);
 	unsigned int		irq;			/* irq number */
+	unsigned long		irqflags;		/* irq flags  */
 	unsigned int		uartclk;		/* base uart clock */
 	unsigned int		fifosize;		/* tx fifo size */
 	unsigned char		x_char;			/* xon/xoff char */
Signature · 1 line
1.6.4.2
#30 lore raw

PATCH 28/79 8250: Now honours baud rate lower bounds

In reply to Greg KH

From: Anton Vorontsov <[email protected]>

A platform clock drives 8250 ports in most SOC systems, the clock might run at high frequencies, and so it's not always possible to downscale uart clock to a desired value.

Currently the 8250 uart driver accepts not supported baud rates, and what is worse, it is doing this silently, and then passes not accepted values to a new termios, so userspace has no chance to catch this kind of errors (userspace verifies that settings were accepted by reading back and comparing the settings).

This patch fixes the issue by passing minimum baud rate to the uart_get_baud_rate() call, the call should take care of all bounds, so userspace should now report:

  # stty -F /dev/ttyS0 speed 300
  115200
  stty: /dev/ttyS0: unable to perform all requested operations

p.s. uart_get_baud_rate() falls back to 9600, which still might be too
low for some 10 GHz platforms, but that's a separate issue, and we can wait with fixing this till we find such a platform.

---
 drivers/serial/8250.c |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)
drivers/serial/8250.c +3 -1
index 83168a6..1fd4894 100644
@@ -2272,7 +2272,9 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
 	/*
 	 * Ask the core to calculate the divisor for us.
 	 */
-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+	baud = uart_get_baud_rate(port, termios, old,
+				  port->uartclk / 16 / 0xffff,
+				  port->uartclk / 16);
 	quot = serial8250_get_divisor(port, baud);
 
 	/*
Signature · 1 line
1.6.4.2
#31 lore raw

PATCH 29/79 tty: Add a full port_close function

In reply to Greg KH

From: Alan Cox <[email protected]>

Now we are extracting out methods for shutdown and the like we can add a proper tty_port_close method that knows all the innards of the tty closing process and hides the lot from the caller.

At some point in the future this will be paired with a similar open() helper and the drivers can stick to hardware management.

---
 drivers/char/tty_port.c |   29 +++++++++++++++++++++++++++--
 include/linux/tty.h     |    8 +++++++-
 2 files changed, 34 insertions(+), 3 deletions(-)
drivers/char/tty_port.c +27 -2
index 9769b11..549bd0f 100644
@@ -96,6 +96,14 @@ void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty)
 }
 EXPORT_SYMBOL(tty_port_tty_set);
 
+static void tty_port_shutdown(struct tty_port *port)
+{
+	if (port->ops->shutdown &&
+		test_and_clear_bit(ASYNC_INITIALIZED, &port->flags))
+			port->ops->shutdown(port);
+
+}
+
 /**
  *	tty_port_hangup		-	hangup helper
  *	@port: tty port
@@ -116,6 +124,7 @@ void tty_port_hangup(struct tty_port *port)
 	port->tty = NULL;
 	spin_unlock_irqrestore(&port->lock, flags);
 	wake_up_interruptible(&port->open_wait);
+	tty_port_shutdown(port);
 }
 EXPORT_SYMBOL(tty_port_hangup);
 
@@ -296,15 +305,17 @@ int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct f
 
 	if (port->count) {
 		spin_unlock_irqrestore(&port->lock, flags);
+		if (port->ops->drop)
+			port->ops->drop(port);
 		return 0;
 	}
-	port->flags |= ASYNC_CLOSING;
+	set_bit(ASYNC_CLOSING, &port->flags);
 	tty->closing = 1;
 	spin_unlock_irqrestore(&port->lock, flags);
 	/* Don't block on a stalled port, just pull the chain */
 	if (tty->flow_stopped)
 		tty_driver_flush_buffer(tty);
-	if (port->flags & ASYNC_INITIALIZED &&
+	if (test_bit(ASYNCB_INITIALIZED, &port->flags) &&
 			port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
 		tty_wait_until_sent(tty, port->closing_wait);
 	if (port->drain_delay) {
@@ -318,6 +329,9 @@ int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct f
 			timeout = 2 * HZ;
 		schedule_timeout_interruptible(timeout);
 	}
+	/* Don't call port->drop for the last reference. Callers will want
+	   to drop the last active reference in ->shutdown() or the tty
+	   shutdown path */
 	return 1;
 }
 EXPORT_SYMBOL(tty_port_close_start);
@@ -348,3 +362,14 @@ void tty_port_close_end(struct tty_port *port, struct tty_struct *tty)
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 EXPORT_SYMBOL(tty_port_close_end);
+
+void tty_port_close(struct tty_port *port, struct tty_struct *tty,
+							struct file *filp)
+{
+	if (tty_port_close_start(port, tty, filp) == 0)
+		return;
+	tty_port_shutdown(port);
+	tty_port_close_end(port, tty);
+	tty_port_tty_set(port, NULL);
+}
+EXPORT_SYMBOL(tty_port_close);
include/linux/tty.h +7 -1
index a916a31..ecb3d1b 100644
@@ -187,7 +187,12 @@ struct tty_port;
 struct tty_port_operations {
 	/* Return 1 if the carrier is raised */
 	int (*carrier_raised)(struct tty_port *port);
+	/* Control the DTR line */
 	void (*dtr_rts)(struct tty_port *port, int raise);
+	/* Called when the last close completes or a hangup finishes
+	   IFF the port was initialized. Do not use to free resources */
+	void (*shutdown)(struct tty_port *port);
+	void (*drop)(struct tty_port *port);
 };
 	
 struct tty_port {
@@ -459,7 +464,8 @@ extern int tty_port_block_til_ready(struct tty_port *port,
 extern int tty_port_close_start(struct tty_port *port,
 				struct tty_struct *tty, struct file *filp);
 extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty);
-
+extern void tty_port_close(struct tty_port *port,
+				struct tty_struct *tty, struct file *filp);
 extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc);
 extern int tty_unregister_ldisc(int disc);
 extern int tty_set_ldisc(struct tty_struct *tty, int ldisc);
Signature · 1 line
1.6.4.2
#32 lore raw

PATCH 30/79 riscom8: split open and close methods up

In reply to Greg KH

From: Alan Cox <[email protected]>

Moving towards a tty_port method for open/close

---
 drivers/char/riscom8.c |   47 ++++++++++++++++++++++++++---------------------
 1 files changed, 26 insertions(+), 21 deletions(-)
drivers/char/riscom8.c +26 -21
index 171711a..9499991 100644
@@ -921,20 +921,12 @@ static void rc_flush_buffer(struct tty_struct *tty)
 	tty_wakeup(tty);
 }
 
-static void rc_close(struct tty_struct *tty, struct file *filp)
+static void rc_close_port(struct tty_struct *tty, struct tty_port *port)
 {
-	struct riscom_port *port = tty->driver_data;
-	struct riscom_board *bp;
 	unsigned long flags;
+	struct riscom_port *rp = container_of(port, struct riscom_port, port);
+	struct riscom_board *bp = port_Board(rp);
 	unsigned long timeout;
-
-	if (!port || rc_paranoia_check(port, tty->name, "close"))
-		return;
-
-	bp = port_Board(port);
-	
-	if (tty_port_close_start(&port->port, tty, filp) == 0)
-		return;
 	
 	/*
 	 * At this point we stop accepting input.  To do this, we
@@ -944,29 +936,42 @@ static void rc_close(struct tty_struct *tty, struct file *filp)
 	 */
 
 	spin_lock_irqsave(&riscom_lock, flags);
-	port->IER &= ~IER_RXD;
-	if (port->port.flags & ASYNC_INITIALIZED) {
-		port->IER &= ~IER_TXRDY;
-		port->IER |= IER_TXEMPTY;
-		rc_out(bp, CD180_CAR, port_No(port));
-		rc_out(bp, CD180_IER, port->IER);
+	rp->IER &= ~IER_RXD;
+	if (port->flags & ASYNC_INITIALIZED) {
+		rp->IER &= ~IER_TXRDY;
+		rp->IER |= IER_TXEMPTY;
+		rc_out(bp, CD180_CAR, port_No(rp));
+		rc_out(bp, CD180_IER, rp->IER);
 		/*
 		 * Before we drop DTR, make sure the UART transmitter
 		 * has completely drained; this is especially
 		 * important if there is a transmit FIFO!
 		 */
 		timeout = jiffies + HZ;
-		while (port->IER & IER_TXEMPTY) {
+		while (rp->IER & IER_TXEMPTY) {
 			spin_unlock_irqrestore(&riscom_lock, flags);
-			msleep_interruptible(jiffies_to_msecs(port->timeout));
+			msleep_interruptible(jiffies_to_msecs(rp->timeout));
 			spin_lock_irqsave(&riscom_lock, flags);
 			if (time_after(jiffies, timeout))
 				break;
 		}
 	}
-	rc_shutdown_port(tty, bp, port);
-	rc_flush_buffer(tty);
+	rc_shutdown_port(tty, bp, rp);
 	spin_unlock_irqrestore(&riscom_lock, flags);
+}
+
+static void rc_close(struct tty_struct *tty, struct file *filp)
+{
+	struct riscom_port *port = tty->driver_data;
+
+	if (!port || rc_paranoia_check(port, tty->name, "close"))
+		return;
+
+	if (tty_port_close_start(&port->port, tty, filp) == 0)
+		return;
+
+	rc_close_port(tty, &port->port);
+	rc_flush_buffer(tty);
 
 	tty_port_close_end(&port->port, tty);
 }
Signature · 1 line
1.6.4.2
#33 lore raw

PATCH 31/79 mxser: Split close ready for a standard tty_port_close method

In reply to Greg KH

From: Alan Cox <[email protected]>

Prepare for the tty_port_close function by splitting out methods

---
 drivers/char/mxser.c |   45 +++++++++++++++++++++++----------------------
 1 files changed, 23 insertions(+), 22 deletions(-)
drivers/char/mxser.c +23 -22
index dbf8d52..30544ca 100644
@@ -1073,34 +1073,17 @@ static void mxser_flush_buffer(struct tty_struct *tty)
 }
 
 
-/*
- * This routine is called when the serial port gets closed.  First, we
- * wait for the last remaining data to be sent.  Then, we unlink its
- * async structure from the interrupt chain if necessary, and we free
- * that IRQ if nothing is left in the chain.
- */
-static void mxser_close(struct tty_struct *tty, struct file *filp)
+static void mxser_close_port(struct tty_struct *tty, struct tty_port *port)
 {
-	struct mxser_port *info = tty->driver_data;
-	struct tty_port *port = &info->port;
-
+	struct mxser_port *info = container_of(port, struct mxser_port, port);
 	unsigned long timeout;
-
-	if (tty->index == MXSER_PORTS)
-		return;
-	if (!info)
-		return;
-
-	if (tty_port_close_start(port, tty, filp) == 0)
-		return;
-
 	/*
 	 * Save the termios structure, since this port may have
 	 * separate termios for callout and dialin.
 	 *
 	 * FIXME: Can this go ?
 	 */
-	if (info->port.flags & ASYNC_NORMAL_ACTIVE)
+	if (port->flags & ASYNC_NORMAL_ACTIVE)
 		info->normal_termios = *tty->termios;
 	/*
 	 * At this point we stop accepting input.  To do this, we
@@ -1112,7 +1095,7 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
 	if (info->board->chip_flag)
 		info->IER &= ~MOXA_MUST_RECV_ISR;
 
-	if (info->port.flags & ASYNC_INITIALIZED) {
+	if (port->flags & ASYNC_INITIALIZED) {
 		outb(info->IER, info->ioaddr + UART_IER);
 		/*
 		 * Before we drop DTR, make sure the UART transmitter
@@ -1127,8 +1110,26 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
 		}
 	}
 	mxser_shutdown(tty);
-	mxser_flush_buffer(tty);
 
+}
+
+/*
+ * This routine is called when the serial port gets closed.  First, we
+ * wait for the last remaining data to be sent.  Then, we unlink its
+ * async structure from the interrupt chain if necessary, and we free
+ * that IRQ if nothing is left in the chain.
+ */
+static void mxser_close(struct tty_struct *tty, struct file *filp)
+{
+	struct mxser_port *info = tty->driver_data;
+	struct tty_port *port = &info->port;
+
+	if (tty->index == MXSER_PORTS)
+		return;
+	if (tty_port_close_start(port, tty, filp) == 0)
+		return;
+	mxser_close_port(tty, port);
+	mxser_flush_buffer(tty);
 	/* Right now the tty_port set is done outside of the close_end helper
 	   as we don't yet have everyone using refcounts */	
 	tty_port_close_end(port, tty);
Signature · 1 line
1.6.4.2
#34 lore raw

PATCH 32/79 isicom: Split the close hardware bits out

In reply to Greg KH

From: Alan Cox <[email protected]>

Start to extract and build a model for a common tty_port_close()

---
 drivers/char/isicom.c |   25 ++++++++++++++-----------
 1 files changed, 14 insertions(+), 11 deletions(-)
drivers/char/isicom.c +14 -11
index 4f1f4cd..08f5743 100644
@@ -952,19 +952,12 @@ static void isicom_flush_buffer(struct tty_struct *tty)
 	tty_wakeup(tty);
 }
 
-static void isicom_close(struct tty_struct *tty, struct file *filp)
+static void isicom_close_port(struct tty_port *port)
 {
-	struct isi_port *ip = tty->driver_data;
-	struct tty_port *port = &ip->port;
-	struct isi_board *card;
+	struct isi_port *ip = container_of(port, struct isi_port, port);
+	struct isi_board *card = ip->card;
 	unsigned long flags;
 
-	BUG_ON(!ip);
-
-	card = ip->card;
-	if (isicom_paranoia_check(ip, tty->name, "isicom_close"))
-		return;
-
 	/* indicate to the card that no more data can be received
 	   on this port */
 	spin_lock_irqsave(&card->card_lock, flags);
@@ -974,9 +967,19 @@ static void isicom_close(struct tty_struct *tty, struct file *filp)
 	}
 	isicom_shutdown_port(ip);
 	spin_unlock_irqrestore(&card->card_lock, flags);
+}
 
+static void isicom_close(struct tty_struct *tty, struct file *filp)
+{
+	struct isi_port *ip = tty->driver_data;
+	struct tty_port *port = &ip->port;
+	if (isicom_paranoia_check(ip, tty->name, "isicom_close"))
+		return;
+
+	if (tty_port_close_start(port, tty, filp) == 0)
+		return;
+	isicom_close_port(port);
 	isicom_flush_buffer(tty);
-	
 	tty_port_close_end(port, tty);
 }
 
Signature · 1 line
1.6.4.2
#35 lore raw

PATCH 33/79 tty: riscom8 kref and tty_port_close

In reply to Greg KH

From: Alan Cox <[email protected]>

We need to kref this driver in order to use port_close

---
 drivers/char/riscom8.c |  131 +++++++++++++++++++++--------------------------
 1 files changed, 59 insertions(+), 72 deletions(-)
drivers/char/riscom8.c +59 -72
index 9499991..7b5623b 100644
@@ -343,7 +343,7 @@ static void rc_receive_exc(struct riscom_board const *bp)
 	if (port == NULL)
 		return;
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 
 #ifdef RC_REPORT_OVERRUN
 	status = rc_in(bp, CD180_RCSR);
@@ -355,18 +355,18 @@ static void rc_receive_exc(struct riscom_board const *bp)
 #endif
 	ch = rc_in(bp, CD180_RDR);
 	if (!status)
-		return;
+		goto out;
 	if (status & RCSR_TOUT)  {
 		printk(KERN_WARNING "rc%d: port %d: Receiver timeout. "
 				    "Hardware problems ?\n",
 		       board_No(bp), port_No(port));
-		return;
+		goto out;
 
 	} else if (status & RCSR_BREAK)  {
 		printk(KERN_INFO "rc%d: port %d: Handling break...\n",
 		       board_No(bp), port_No(port));
 		flag = TTY_BREAK;
-		if (port->port.flags & ASYNC_SAK)
+		if (tty && (port->port.flags & ASYNC_SAK))
 			do_SAK(tty);
 
 	} else if (status & RCSR_PE)
@@ -380,8 +380,12 @@ static void rc_receive_exc(struct riscom_board const *bp)
 	else
 		flag = TTY_NORMAL;
 
-	tty_insert_flip_char(tty, ch, flag);
-	tty_flip_buffer_push(tty);
+	if (tty) {
+		tty_insert_flip_char(tty, ch, flag);
+		tty_flip_buffer_push(tty);
+	}
+out:
+	tty_kref_put(tty);
 }
 
 static void rc_receive(struct riscom_board const *bp)
@@ -394,7 +398,7 @@ static void rc_receive(struct riscom_board const *bp)
 	if (port == NULL)
 		return;
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 
 	count = rc_in(bp, CD180_RDCR);
 
@@ -403,15 +407,14 @@ static void rc_receive(struct riscom_board const *bp)
 #endif
 
 	while (count--)  {
-		if (tty_buffer_request_room(tty, 1) == 0)  {
-			printk(KERN_WARNING "rc%d: port %d: Working around "
-					    "flip buffer overflow.\n",
-			       board_No(bp), port_No(port));
-			break;
-		}
-		tty_insert_flip_char(tty, rc_in(bp, CD180_RDR), TTY_NORMAL);
+		u8 ch = rc_in(bp, CD180_RDR);
+		if (tty)
+			tty_insert_flip_char(tty, ch, TTY_NORMAL);
+	}
+	if (tty) {
+		tty_flip_buffer_push(tty);
+		tty_kref_put(tty);
 	}
-	tty_flip_buffer_push(tty);
 }
 
 static void rc_transmit(struct riscom_board const *bp)
@@ -424,22 +427,22 @@ static void rc_transmit(struct riscom_board const *bp)
 	if (port == NULL)
 		return;
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 
 	if (port->IER & IER_TXEMPTY) {
 		/* FIFO drained */
 		rc_out(bp, CD180_CAR, port_No(port));
 		port->IER &= ~IER_TXEMPTY;
 		rc_out(bp, CD180_IER, port->IER);
-		return;
+		goto out;
 	}
 
 	if ((port->xmit_cnt <= 0 && !port->break_length)
-	    || tty->stopped || tty->hw_stopped)  {
+	    || (tty && (tty->stopped || tty->hw_stopped)))  {
 		rc_out(bp, CD180_CAR, port_No(port));
 		port->IER &= ~IER_TXRDY;
 		rc_out(bp, CD180_IER, port->IER);
-		return;
+		goto out;
 	}
 
 	if (port->break_length)  {
@@ -480,8 +483,10 @@ static void rc_transmit(struct riscom_board const *bp)
 		port->IER &= ~IER_TXRDY;
 		rc_out(bp, CD180_IER, port->IER);
 	}
-	if (port->xmit_cnt <= port->wakeup_chars)
+	if (tty && port->xmit_cnt <= port->wakeup_chars)
 		tty_wakeup(tty);
+out:
+	tty_kref_put(tty);
 }
 
 static void rc_check_modem(struct riscom_board const *bp)
@@ -494,37 +499,43 @@ static void rc_check_modem(struct riscom_board const *bp)
 	if (port == NULL)
 		return;
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 
 	mcr = rc_in(bp, CD180_MCR);
 	if (mcr & MCR_CDCHG) {
 		if (rc_in(bp, CD180_MSVR) & MSVR_CD)
 			wake_up_interruptible(&port->port.open_wait);
-		else
+		else if (tty)
 			tty_hangup(tty);
 	}
 
 #ifdef RISCOM_BRAIN_DAMAGED_CTS
 	if (mcr & MCR_CTSCHG)  {
 		if (rc_in(bp, CD180_MSVR) & MSVR_CTS)  {
-			tty->hw_stopped = 0;
 			port->IER |= IER_TXRDY;
-			if (port->xmit_cnt <= port->wakeup_chars)
-				tty_wakeup(tty);
+			if (tty) {
+				tty->hw_stopped = 0;
+				if (port->xmit_cnt <= port->wakeup_chars)
+					tty_wakeup(tty);
+			}
 		} else  {
-			tty->hw_stopped = 1;
+			if (tty)
+				tty->hw_stopped = 1;
 			port->IER &= ~IER_TXRDY;
 		}
 		rc_out(bp, CD180_IER, port->IER);
 	}
 	if (mcr & MCR_DSRCHG)  {
 		if (rc_in(bp, CD180_MSVR) & MSVR_DSR)  {
-			tty->hw_stopped = 0;
 			port->IER |= IER_TXRDY;
-			if (port->xmit_cnt <= port->wakeup_chars)
-				tty_wakeup(tty);
+			if (tty) {
+				tty->hw_stopped = 0;
+				if (port->xmit_cnt <= port->wakeup_chars)
+					tty_wakeup(tty);
+			}
 		} else  {
-			tty->hw_stopped = 1;
+			if (tty)
+				tty->hw_stopped = 1;
 			port->IER &= ~IER_TXRDY;
 		}
 		rc_out(bp, CD180_IER, port->IER);
@@ -533,6 +544,7 @@ static void rc_check_modem(struct riscom_board const *bp)
 
 	/* Clear change bits */
 	rc_out(bp, CD180_MCR, 0);
+	tty_kref_put(tty);
 }
 
 /* The main interrupt processing routine */
@@ -632,9 +644,9 @@ static void rc_shutdown_board(struct riscom_board *bp)
  * Setting up port characteristics.
  * Must be called with disabled interrupts
  */
-static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port)
+static void rc_change_speed(struct tty_struct *tty, struct riscom_board *bp,
+						struct riscom_port *port)
 {
-	struct tty_struct *tty = port->port.tty;
 	unsigned long baud;
 	long tmp;
 	unsigned char cor1 = 0, cor3 = 0;
@@ -781,7 +793,8 @@ static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port)
 }
 
 /* Must be called with interrupts enabled */
-static int rc_setup_port(struct riscom_board *bp, struct riscom_port *port)
+static int rc_setup_port(struct tty_struct *tty, struct riscom_board *bp,
+						struct riscom_port *port)
 {
 	unsigned long flags;
 
@@ -793,11 +806,11 @@ static int rc_setup_port(struct riscom_board *bp, struct riscom_port *port)
 
 	spin_lock_irqsave(&riscom_lock, flags);
 
-	clear_bit(TTY_IO_ERROR, &port->port.tty->flags);
+	clear_bit(TTY_IO_ERROR, &tty->flags);
 	if (port->port.count == 1)
 		bp->count++;
 	port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
-	rc_change_speed(bp, port);
+	rc_change_speed(tty, bp, port);
 	port->port.flags |= ASYNC_INITIALIZED;
 
 	spin_unlock_irqrestore(&riscom_lock, flags);
@@ -898,9 +911,9 @@ static int rc_open(struct tty_struct *tty, struct file *filp)
 
 	port->port.count++;
 	tty->driver_data = port;
-	port->port.tty = tty;
+	tty_port_tty_set(&port->port, tty);
 
-	error = rc_setup_port(bp, port);
+	error = rc_setup_port(tty, bp, port);
 	if (error == 0)
 		error = tty_port_block_til_ready(&port->port, tty, filp);
 	return error;
@@ -921,7 +934,7 @@ static void rc_flush_buffer(struct tty_struct *tty)
 	tty_wakeup(tty);
 }
 
-static void rc_close_port(struct tty_struct *tty, struct tty_port *port)
+static void rc_close_port(struct tty_port *port, struct tty_struct *tty)
 {
 	unsigned long flags;
 	struct riscom_port *rp = container_of(port, struct riscom_port, port);
@@ -966,14 +979,7 @@ static void rc_close(struct tty_struct *tty, struct file *filp)
 
 	if (!port || rc_paranoia_check(port, tty->name, "close"))
 		return;
-
-	if (tty_port_close_start(&port->port, tty, filp) == 0)
-		return;
-
-	rc_close_port(tty, &port->port);
-	rc_flush_buffer(tty);
-
-	tty_port_close_end(&port->port, tty);
+	tty_port_close(&port->port, tty, filp);
 }
 
 static int rc_write(struct tty_struct *tty,
@@ -1175,7 +1181,7 @@ static int rc_send_break(struct tty_struct *tty, int length)
 	return 0;
 }
 
-static int rc_set_serial_info(struct riscom_port *port,
+static int rc_set_serial_info(struct tty_struct *tty, struct riscom_port *port,
 				     struct serial_struct __user *newinfo)
 {
 	struct serial_struct tmp;
@@ -1185,17 +1191,6 @@ static int rc_set_serial_info(struct riscom_port *port,
 	if (copy_from_user(&tmp, newinfo, sizeof(tmp)))
 		return -EFAULT;
 
-#if 0
-	if ((tmp.irq != bp->irq) ||
-	    (tmp.port != bp->base) ||
-	    (tmp.type != PORT_CIRRUS) ||
-	    (tmp.baud_base != (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC) ||
-	    (tmp.custom_divisor != 0) ||
-	    (tmp.xmit_fifo_size != CD180_NFIFO) ||
-	    (tmp.flags & ~RISCOM_LEGAL_FLAGS))
-		return -EINVAL;
-#endif
-
 	change_speed = ((port->port.flags & ASYNC_SPD_MASK) !=
 			(tmp.flags & ASYNC_SPD_MASK));
 
@@ -1217,7 +1212,7 @@ static int rc_set_serial_info(struct riscom_port *port,
 		unsigned long flags;
 
 		spin_lock_irqsave(&riscom_lock, flags);
-		rc_change_speed(bp, port);
+		rc_change_speed(tty, bp, port);
 		spin_unlock_irqrestore(&riscom_lock, flags);
 	}
 	return 0;
@@ -1260,7 +1255,7 @@ static int rc_ioctl(struct tty_struct *tty, struct file *filp,
 		break;
 	case TIOCSSERIAL:
 		lock_kernel();
-		retval = rc_set_serial_info(port, argp);
+		retval = rc_set_serial_info(tty, port, argp);
 		unlock_kernel();
 		break;
 	default:
@@ -1355,21 +1350,12 @@ static void rc_start(struct tty_struct *tty)
 static void rc_hangup(struct tty_struct *tty)
 {
 	struct riscom_port *port = tty->driver_data;
-	struct riscom_board *bp;
-	unsigned long flags;
 
 	if (rc_paranoia_check(port, tty->name, "rc_hangup"))
 		return;
 
-	bp = port_Board(port);
-
-	rc_shutdown_port(tty, bp, port);
-	spin_lock_irqsave(&port->port.lock, flags);
-	port->port.count = 0;
-	port->port.flags &= ~ASYNC_NORMAL_ACTIVE;
-	port->port.tty = NULL;
-	wake_up_interruptible(&port->port.open_wait);
-	spin_unlock_irqrestore(&port->port.lock, flags);
+	rc_shutdown_port(tty, port_Board(port), port);
+	tty_port_hangup(&port->port);
 }
 
 static void rc_set_termios(struct tty_struct *tty,
@@ -1382,7 +1368,7 @@ static void rc_set_termios(struct tty_struct *tty,
 		return;
 
 	spin_lock_irqsave(&riscom_lock, flags);
-	rc_change_speed(port_Board(port), port);
+	rc_change_speed(tty, port_Board(port), port);
 	spin_unlock_irqrestore(&riscom_lock, flags);
 
 	if ((old_termios->c_cflag & CRTSCTS) &&
@@ -1415,6 +1401,7 @@ static const struct tty_operations riscom_ops = {
 
 static const struct tty_port_operations riscom_port_ops = {
 	.carrier_raised = carrier_raised,
+	.shutdown = rc_close_port,
 };
 
 
Signature · 1 line
1.6.4.2
#36 lore raw

PATCH 34/79 cyclades: use the full port_close function

In reply to Greg KH

From: Alan Cox <[email protected]>

Convert cyclades to use the full tty_port_close helper

---
 drivers/char/cyclades.c |   36 +++++++++++++++++-------------------
 1 files changed, 17 insertions(+), 19 deletions(-)
drivers/char/cyclades.c +17 -19
index f518e0b..70bd61b 100644
@@ -1750,24 +1750,15 @@ static void cy_flush_buffer(struct tty_struct *tty)
 }				/* cy_flush_buffer */
 
 
-/*
- * This routine is called when a particular tty device is closed.
- */
-static void cy_close(struct tty_struct *tty, struct file *filp)
+static void cy_do_close(struct tty_port *port)
 {
-	struct cyclades_port *info = tty->driver_data;
+	struct cyclades_port *info = container_of(port, struct cyclades_port,
+								port);
 	struct cyclades_card *card;
 	unsigned long flags;
 	int channel;
 
-	if (!info || serial_paranoia_check(info, tty->name, "cy_close"))
-		return;
-
 	card = info->card;
-
-	if (!tty_port_close_start(&info->port, tty, filp))
-		return;
-
 	channel = info->line - card->first_line;
 	spin_lock_irqsave(&card->card_lock, flags);
 
@@ -1779,7 +1770,7 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
 			/* Waiting for on-board buffers to be empty before
 			   closing the port */
 			spin_unlock_irqrestore(&card->card_lock, flags);
-			cy_wait_until_sent(tty, info->timeout);
+			cy_wait_until_sent(port->tty, info->timeout);
 			spin_lock_irqsave(&card->card_lock, flags);
 		}
 	} else {
@@ -1801,14 +1792,19 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
 		}
 #endif
 	}
-
 	spin_unlock_irqrestore(&card->card_lock, flags);
-	cy_shutdown(info, tty);
-	cy_flush_buffer(tty);
-
-	tty_port_tty_set(&info->port, NULL);
+	cy_shutdown(info, port->tty);
+}
 
-	tty_port_close_end(&info->port, tty);
+/*
+ * This routine is called when a particular tty device is closed.
+ */
+static void cy_close(struct tty_struct *tty, struct file *filp)
+{
+	struct cyclades_port *info = tty->driver_data;
+	if (!info || serial_paranoia_check(info, tty->name, "cy_close"))
+		return;
+	tty_port_close(&info->port, tty, filp);
 }				/* cy_close */
 
 /* This routine gets called when tty_write has put something into
@@ -3113,11 +3109,13 @@ static void cyz_dtr_rts(struct tty_port *port, int raise)
 static const struct tty_port_operations cyy_port_ops = {
 	.carrier_raised = cyy_carrier_raised,
 	.dtr_rts = cyy_dtr_rts,
+	.shutdown = cy_do_close,
 };
 
 static const struct tty_port_operations cyz_port_ops = {
 	.carrier_raised = cyz_carrier_raised,
 	.dtr_rts = cyz_dtr_rts,
+	.shutdown = cy_do_close,
 };
 
 /*
Signature · 1 line
1.6.4.2
#37 lore raw

PATCH 35/79 tty: make the kref destructor occur asynchronously

In reply to Greg KH

From: Alan Cox <[email protected]>

We want to be able to sleep in the destructor for USB at least. It isn't a hot path so just pushing it to a work queue doesn't really cause any difficulty.

---
 drivers/char/tty_io.c |   19 ++++++++++++++++---
 1 files changed, 16 insertions(+), 3 deletions(-)
drivers/char/tty_io.c +16 -3
index 9384480..385cca7 100644
@@ -1386,10 +1386,14 @@ EXPORT_SYMBOL(tty_shutdown);
  *		tty_mutex - sometimes only
  *		takes the file list lock internally when working on the list
  *	of ttys that the driver keeps.
+ *
+ *	This method gets called from a work queue so that the driver private
+ *	shutdown ops can sleep (needed for USB at least)
  */
-static void release_one_tty(struct kref *kref)
+static void release_one_tty(struct work_struct *work)
 {
-	struct tty_struct *tty = container_of(kref, struct tty_struct, kref);
+	struct tty_struct *tty =
+		container_of(work, struct tty_struct, hangup_work);
 	struct tty_driver *driver = tty->driver;
 
 	if (tty->ops->shutdown)
@@ -1407,6 +1411,15 @@ static void release_one_tty(struct kref *kref)
 	free_tty_struct(tty);
 }
 
+static void queue_release_one_tty(struct kref *kref)
+{
+	struct tty_struct *tty = container_of(kref, struct tty_struct, kref);
+	/* The hangup queue is now free so we can reuse it rather than
+	   waste a chunk of memory for each port */
+	INIT_WORK(&tty->hangup_work, release_one_tty);
+	schedule_work(&tty->hangup_work);
+}
+
 /**
  *	tty_kref_put		-	release a tty kref
  *	@tty: tty device
@@ -1418,7 +1431,7 @@ static void release_one_tty(struct kref *kref)
 void tty_kref_put(struct tty_struct *tty)
 {
 	if (tty)
-		kref_put(&tty->kref, release_one_tty);
+		kref_put(&tty->kref, queue_release_one_tty);
 }
 EXPORT_SYMBOL(tty_kref_put);
 
Signature · 1 line
1.6.4.2
#38 lore raw

PATCH 36/79 cdc_acm: Fix to use modern speed interfaces

In reply to Greg KH

From: Alan Cox <[email protected]>

This changed in 2006 so its about time the ACM driver caught up

---
 drivers/usb/class/cdc-acm.c |    5 +----
 1 files changed, 1 insertions(+), 4 deletions(-)
drivers/usb/class/cdc-acm.c +1 -4
index 2bfc41e..85a1a55 100644
@@ -858,10 +858,7 @@ static void acm_tty_set_termios(struct tty_struct *tty,
 	if (!ACM_READY(acm))
 		return;
 
-	/* FIXME: Needs to support the tty_baud interface */
-	/* FIXME: Broken on sparc */
-	newline.dwDTERate = cpu_to_le32p(acm_tty_speed +
-		(termios->c_cflag & CBAUD & ~CBAUDEX) + (termios->c_cflag & CBAUDEX ? 15 : 0));
+	newline.dwDTERate = cpu_to_le32(tty_get_baud_rate(tty));
 	newline.bCharFormat = termios->c_cflag & CSTOPB ? 2 : 0;
 	newline.bParityType = termios->c_cflag & PARENB ?
 				(termios->c_cflag & PARODD ? 1 : 2) +
Signature · 1 line
1.6.4.2
#39 lore raw

PATCH 37/79 tty: USB hangup is racy

In reply to Greg KH

From: Alan Cox <[email protected]>

The USB layer uses tty_hangup to deal with unplugs of the physical hardware (analogous to loss of carrier) and then frees the resources. However the tty_hangup is asynchronous. As the hangup can sleep we can use tty_vhangup which is the non async version to avoid freeing resources too early.

---
 drivers/usb/serial/usb-serial.c |    5 +----
 1 files changed, 1 insertions(+), 4 deletions(-)
drivers/usb/serial/usb-serial.c +1 -4
index 99188c9..21dd72a 100644
@@ -1161,10 +1161,7 @@ void usb_serial_disconnect(struct usb_interface *interface)
 		if (port) {
 			struct tty_struct *tty = tty_port_tty_get(&port->port);
 			if (tty) {
-				/* The hangup will occur asynchronously but
-				   the object refcounts will sort out all the
-				   cleanup */
-				tty_hangup(tty);
+				tty_vhangup(tty);
 				tty_kref_put(tty);
 			}
 			kill_traffic(port);
Signature · 1 line
1.6.4.2
#40 lore raw

PATCH 38/79 tty: remove dtr/rts use from the driver open methods

In reply to Greg KH

From: Alan Cox <[email protected]>

These are handled by the tty_port core code which will raise and lower the carrier correctly in tty_wait_until_ready

---
 drivers/usb/serial/cp210x.c |    6 ------
 1 files changed, 0 insertions(+), 6 deletions(-)
drivers/usb/serial/cp210x.c +0 -6
index 985cbcf..b5275c4 100644
@@ -399,12 +399,6 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port,
 
 	/* Configure the termios structure */
 	cp210x_get_termios(tty, port);
-
-	/* Set the DTR and RTS pins low */
-	cp210x_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data
-			: port,
-		NULL, TIOCM_DTR | TIOCM_RTS, 0);
-
 	return 0;
 }
 
Signature · 1 line
1.6.4.2
#41 lore raw

PATCH 39/79 tty: USB can now use the shutdown method for kref based freeing of ports

In reply to Greg KH

From: Alan Cox <[email protected]>

---
 drivers/usb/serial/usb-serial.c |   28 +++++++---------------------
 1 files changed, 7 insertions(+), 21 deletions(-)
drivers/usb/serial/usb-serial.c +7 -21
index 21dd72a..31c7a09 100644
@@ -316,16 +316,19 @@ static void serial_do_down(struct usb_serial_port *port)
  *
  *	Do the resource freeing and refcount dropping for the port. We must
  *	be careful about ordering and we must avoid freeing up the console.
+ *
+ *	Called when the last tty kref is dropped.
  */
 
-static void serial_do_free(struct usb_serial_port *port)
+static void serial_do_free(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial;
 	struct module *owner;
 
 	/* The console is magical, do not hang up the console hardware
 	   or there will be tears */
-	if (port->console)
+	if (port == NULL || port->console)
 		return;
 
 	serial = port->serial;
@@ -350,30 +353,12 @@ static void serial_close(struct tty_struct *tty, struct file *filp)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/* FIXME:
-	   This leaves a very narrow race. Really we should do the
-	   serial_do_free() on tty->shutdown(), but tty->shutdown can
-	   be called from IRQ context and serial_do_free can sleep.
-
-	   The right fix is probably to make the tty free (which is rare)
-	   and thus tty->shutdown() occur via a work queue and simplify all
-	   the drivers that use it.
-	*/
-	if (tty_hung_up_p(filp)) {
-		/* serial_hangup already called serial_down at this point.
-		   Another user may have already reopened the port but
-		   serial_do_free is refcounted */
-		serial_do_free(port);
-		return;
-	}
-
 	if (tty_port_close_start(&port->port, tty, filp) == 0)
 		return;
-
 	serial_do_down(port);		
 	tty_port_close_end(&port->port, tty);
 	tty_port_tty_set(&port->port, NULL);
-	serial_do_free(port);
+
 }
 
 static void serial_hangup(struct tty_struct *tty)
@@ -1243,6 +1228,7 @@ static const struct tty_operations serial_ops = {
 	.chars_in_buffer =	serial_chars_in_buffer,
 	.tiocmget =		serial_tiocmget,
 	.tiocmset =		serial_tiocmset,
+	.shutdown =		serial_do_free,
 	.proc_fops =		&serial_proc_fops,
 };
 
Signature · 1 line
1.6.4.2
#42 lore raw

PATCH 40/79 vt: add an event interface

In reply to Greg KH

From: Alan Cox <[email protected]>

This is needed and requested in various forms for ConsoleKit, screenblank handling and the like so do the job with a single interface. Also build the interface so that unlike VT_WAITACTIVE and friends it won't miss events.

FIXME: Should this be a waitactive ioctl or a new device file you can poll and read events from. We need the code anyway to fix up the existing broken wait for console switch logic but the ConsoleKit people would prefer the new device to the ioctl we have here

---
 drivers/char/vt.c       |    4 +-
 drivers/char/vt_ioctl.c |  185 ++++++++++++++++++++++++++++++++++-------------
 include/linux/vt.h      |   14 ++++
 include/linux/vt_kern.h |    3 +-
 4 files changed, 154 insertions(+), 52 deletions(-)
drivers/char/vt.c +3 -1
index e47a4c8..33214d9 100644
@@ -252,7 +252,6 @@ static void notify_update(struct vc_data *vc)
 	struct vt_notifier_param param = { .vc = vc };
 	atomic_notifier_call_chain(&vt_notifier_list, VT_UPDATE, &param);
 }
-
 /*
  *	Low-Level Functions
  */
@@ -935,6 +934,7 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
 
 	if (CON_IS_VISIBLE(vc))
 		update_screen(vc);
+	vt_event_post(VT_EVENT_RESIZE, vc->vc_num, vc->vc_num);
 	return err;
 }
 
@@ -3637,6 +3637,7 @@ void do_blank_screen(int entering_gfx)
 		blank_state = blank_vesa_wait;
 		mod_timer(&console_timer, jiffies + vesa_off_interval);
 	}
+	vt_event_post(VT_EVENT_BLANK, vc->vc_num, vc->vc_num);
 }
 EXPORT_SYMBOL(do_blank_screen);
 
@@ -3681,6 +3682,7 @@ void do_unblank_screen(int leaving_gfx)
 		console_blank_hook(0);
 	set_palette(vc);
 	set_cursor(vc);
+	vt_event_post(VT_EVENT_UNBLANK, vc->vc_num, vc->vc_num);
 }
 EXPORT_SYMBOL(do_unblank_screen);
 
drivers/char/vt_ioctl.c +135 -50

227 lines not on this page · raw message

include/linux/vt.h +14 -0
index 02c1c02..89c03a1 100644
@@ -74,4 +74,18 @@ struct vt_consize {
 #define VT_UNLOCKSWITCH 0x560C  /* allow vt switching */
 #define VT_GETHIFONTMASK 0x560D  /* return hi font mask */
 
+struct vt_event {
+	unsigned int event;
+#define VT_EVENT_SWITCH		0x0001	/* Console switch */
+#define VT_EVENT_BLANK		0x0002	/* Screen blank */
+#define VT_EVENT_UNBLANK	0x0004	/* Screen unblank */
+#define VT_EVENT_RESIZE		0x0008	/* Resize display */
+#define VT_MAX_EVENT		0x000F
+	unsigned int old;		/* Old console */
+	unsigned int new;		/* New console (if changing) */
+	unsigned int pad[4];		/* Padding for expansion */
+};
+
+#define VT_WAITEVENT	0x560E	/* Wait for an event */
+
 #endif /* _LINUX_VT_H */
include/linux/vt_kern.h +2 -1
index 2f11134..f8c797d 100644
@@ -91,7 +91,8 @@ int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc);
 #endif
 
 /* vt.c */
-int vt_waitactive(int vt);
+void vt_event_post(unsigned int event, unsigned int old, unsigned int new);
+int vt_waitactive(int n);
 void change_console(struct vc_data *new_vc);
 void reset_vc(struct vc_data *vc);
 extern int unbind_con_driver(const struct consw *csw, int first, int last,
Signature · 1 line
1.6.4.2
#43 lore raw

PATCH 41/79 vt: remove power stuff from kernel/power

In reply to Greg KH

From: Alan Cox <[email protected]>

In the past someone gratuitiously borrowed chunks of kernel internal vt code and dumped them in kernel/power. They have all sorts of deep relations with the vt code so put them in the vt tree instead

---
 drivers/char/vt_ioctl.c |   56 +++++++++++++++++++++++++++++++++++++++++
 include/linux/vt_kern.h |    1 +
 kernel/power/console.c  |   63 +++-------------------------------------------
 3 files changed, 62 insertions(+), 58 deletions(-)
drivers/char/vt_ioctl.c +56 -0
index 35ad94e..d29fbd4 100644
@@ -16,6 +16,7 @@
 #include <linux/tty.h>
 #include <linux/timer.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/kd.h>
 #include <linux/vt.h>
 #include <linux/string.h>
@@ -1483,3 +1484,58 @@ void change_console(struct vc_data *new_vc)
 
 	complete_change_console(new_vc);
 }
+
+/* Perform a kernel triggered VT switch for suspend/resume */
+
+static int disable_vt_switch;
+
+int vt_move_to_console(unsigned int vt, int alloc)
+{
+	int prev;
+
+	acquire_console_sem();
+	/* Graphics mode - up to X */
+	if (disable_vt_switch) {
+		release_console_sem();
+		return 0;
+	}
+	prev = fg_console;
+
+	if (alloc && vc_allocate(vt)) {
+		/* we can't have a free VC for now. Too bad,
+		 * we don't want to mess the screen for now. */
+		release_console_sem();
+		return -ENOSPC;
+	}
+
+	if (set_console(vt)) {
+		/*
+		 * We're unable to switch to the SUSPEND_CONSOLE.
+		 * Let the calling function know so it can decide
+		 * what to do.
+		 */
+		release_console_sem();
+		return -EIO;
+	}
+	release_console_sem();
+	if (vt_waitactive(vt)) {
+		pr_debug("Suspend: Can't switch VCs.");
+		return -EINTR;
+	}
+	return prev;
+}
+
+/*
+ * Normally during a suspend, we allocate a new console and switch to it.
+ * When we resume, we switch back to the original console.  This switch
+ * can be slow, so on systems where the framebuffer can handle restoration
+ * of video registers anyways, there's little point in doing the console
+ * switch.  This function allows you to disable it by passing it '0'.
+ */
+void pm_set_vt_switch(int do_switch)
+{
+	acquire_console_sem();
+	disable_vt_switch = !do_switch;
+	release_console_sem();
+}
+EXPORT_SYMBOL(pm_set_vt_switch);
include/linux/vt_kern.h +1 -0
index f8c797d..5b53efe 100644
@@ -117,4 +117,5 @@ struct vt_spawn_console {
 };
 extern struct vt_spawn_console vt_spawn_con;
 
+extern int vt_move_to_console(unsigned int vt, int alloc);
 #endif /* _VT_KERN_H */
kernel/power/console.c +5 -58

80 lines not on this page · raw message

Signature · 1 line
1.6.4.2
#44 lore raw

PATCH 42/79 vt: move kernel stuff out of vt.h

In reply to Greg KH

From: Alan Cox <[email protected]>

We have vt_kern.h for this

---
 include/linux/vt.h      |   11 -----------
 include/linux/vt_kern.h |   12 ++++++++++++
 2 files changed, 12 insertions(+), 11 deletions(-)
include/linux/vt.h +0 -11
index 89c03a1..831daf6 100644
@@ -1,17 +1,6 @@
 #ifndef _LINUX_VT_H
 #define _LINUX_VT_H
 
-#ifdef __KERNEL__
-struct notifier_block;
-
-struct vt_notifier_param {
-	struct vc_data *vc;	/* VC on which the update happened */
-	unsigned int c;		/* Printed char */
-};
-
-extern int register_vt_notifier(struct notifier_block *nb);
-extern int unregister_vt_notifier(struct notifier_block *nb);
-#endif
 
 /*
  * These constants are also useful for user-level apps (e.g., VC
include/linux/vt_kern.h +12 -0
index 5b53efe..c0c4e11 100644
@@ -13,6 +13,7 @@
 #include <linux/console_struct.h>
 #include <linux/mm.h>
 #include <linux/consolemap.h>
+#include <linux/notifier.h>
 
 /*
  * Presently, a lot of graphics programs do not restore the contents of
@@ -118,4 +119,15 @@ struct vt_spawn_console {
 extern struct vt_spawn_console vt_spawn_con;
 
 extern int vt_move_to_console(unsigned int vt, int alloc);
+
+/* Interfaces for VC notification of character events (for accessibility etc) */
+
+struct vt_notifier_param {
+	struct vc_data *vc;	/* VC on which the update happened */
+	unsigned int c;		/* Printed char */
+};
+
+extern int register_vt_notifier(struct notifier_block *nb);
+extern int unregister_vt_notifier(struct notifier_block *nb);
+
 #endif /* _VT_KERN_H */
Signature · 1 line
1.6.4.2
#45 lore raw

PATCH 43/79 vt: add an activate and lock

In reply to Greg KH

From: Alan Cox <[email protected]>

X and other graphical interfaces need to be able to flip to a console and lock it into graphics mode without races.

---
 drivers/char/vt_ioctl.c |   38 +++++++++++++++++++++++++++++++++++++-
 include/linux/vt.h      |    7 +++++++
 2 files changed, 44 insertions(+), 1 deletions(-)
drivers/char/vt_ioctl.c +37 -1
index d29fbd4..0fceb8f 100644
@@ -972,6 +972,41 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
 		}
 		break;
 
+	case VT_SETACTIVATE:
+	{
+		struct vt_setactivate vsa;
+
+		if (!perm)
+			goto eperm;
+
+		if (copy_from_user(&vsa, (struct vt_setactivate __user *)arg,
+						sizeof(struct vt_setactivate)))
+			return -EFAULT;
+		if (vsa.console == 0 || vsa.console > MAX_NR_CONSOLES)
+			ret = -ENXIO;
+		else {
+			vsa.console--;
+			acquire_console_sem();
+			ret = vc_allocate(vsa.console);
+			if (ret == 0) {
+				struct vc_data *nvc;
+				/* This is safe providing we don't drop the
+				   console sem between vc_allocate and
+				   finishing referencing nvc */
+				nvc = vc_cons[vsa.console].d;
+				nvc->vt_mode = vsa.mode;
+				nvc->vt_mode.frsig = 0;
+				put_pid(nvc->vt_pid);
+				nvc->vt_pid = get_pid(task_pid(current));
+			}
+			release_console_sem();
+			if (ret)
+				break;
+			/* Commence switch and lock */
+			set_console(arg);
+		}
+	}
+
 	/*
 	 * wait until the specified VT has been activated
 	 */
@@ -1342,7 +1377,8 @@ void vc_SAK(struct work_struct *work)
 }
 
 /*
- * Performs the back end of a vt switch
+ * Performs the back end of a vt switch. Called under the console
+ * semaphore.
  */
 static void complete_change_console(struct vc_data *vc)
 {
include/linux/vt.h +7 -0
index 831daf6..7afca0d 100644
@@ -77,4 +77,11 @@ struct vt_event {
 
 #define VT_WAITEVENT	0x560E	/* Wait for an event */
 
+struct vt_setactivate {
+	unsigned int console;
+	struct vt_mode mode;
+};
+
+#define VT_SETACTIVATE	0x560F	/* Activate and set the mode of a console */
+
 #endif /* _LINUX_VT_H */
Signature · 1 line
1.6.4.2
#46 lore raw

PATCH 44/79 tty: USB does not need the filp argument in the drivers

In reply to Greg KH

From: Alan Cox <[email protected]>

And indeed none of them use it. Clean this up as it will make moving to a standard open method rather easier.

---
 drivers/usb/serial/ark3116.c          |    5 ++---
 drivers/usb/serial/belkin_sa.c        |    4 ++--
 drivers/usb/serial/ch341.c            |    5 ++---
 drivers/usb/serial/console.c          |    4 ++--
 drivers/usb/serial/cp210x.c           |    6 ++----
 drivers/usb/serial/cyberjack.c        |    4 ++--
 drivers/usb/serial/cypress_m8.c       |    6 ++----
 drivers/usb/serial/digi_acceleport.c  |    6 ++----
 drivers/usb/serial/empeg.c            |    8 +++-----
 drivers/usb/serial/ftdi_sio.c         |    6 ++----
 drivers/usb/serial/garmin_gps.c       |    3 +--
 drivers/usb/serial/generic.c          |    3 +--
 drivers/usb/serial/io_edgeport.c      |    6 ++----
 drivers/usb/serial/io_ti.c            |    3 +--
 drivers/usb/serial/ipaq.c             |    9 ++-------
 drivers/usb/serial/ipw.c              |    3 +--
 drivers/usb/serial/ir-usb.c           |    6 ++----
 drivers/usb/serial/iuu_phoenix.c      |    5 ++---
 drivers/usb/serial/keyspan.c          |    3 +--
 drivers/usb/serial/keyspan.h          |    3 +--
 drivers/usb/serial/keyspan_pda.c      |    2 +-
 drivers/usb/serial/kl5kusb105.c       |   10 ++--------
 drivers/usb/serial/kobil_sct.c        |    6 ++----
 drivers/usb/serial/mct_u232.c         |    6 ++----
 drivers/usb/serial/mos7720.c          |    3 +--
 drivers/usb/serial/mos7840.c          |    3 +--
 drivers/usb/serial/navman.c           |    3 +--
 drivers/usb/serial/omninet.c          |    6 ++----
 drivers/usb/serial/opticon.c          |    3 +--
 drivers/usb/serial/option.c           |    6 ++----
 drivers/usb/serial/oti6858.c          |    6 ++----
 drivers/usb/serial/pl2303.c           |    5 +----
 drivers/usb/serial/sierra.c           |    3 +--
 drivers/usb/serial/spcp8x5.c          |    5 +----
 drivers/usb/serial/symbolserial.c     |    3 +--
 drivers/usb/serial/ti_usb_3410_5052.c |    6 ++----
 drivers/usb/serial/usb-serial.c       |    2 +-
 drivers/usb/serial/usb_debug.c        |    5 ++---
 drivers/usb/serial/visor.c            |    6 ++----
 drivers/usb/serial/whiteheat.c        |    5 ++---
 include/linux/usb/serial.h            |    7 +++----
 41 files changed, 68 insertions(+), 131 deletions(-)
drivers/usb/serial/ark3116.c +2 -3
index aec6188..7ddde4d 100644
@@ -318,8 +318,7 @@ static void ark3116_set_termios(struct tty_struct *tty,
 	return;
 }
 
-static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filp)
+static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
@@ -334,7 +333,7 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port,
 		return -ENOMEM;
 	}
 
-	result = usb_serial_generic_open(tty, port, filp);
+	result = usb_serial_generic_open(tty, port);
 	if (result)
 		goto err_out;
 
drivers/usb/serial/belkin_sa.c +2 -2
index 7033b03..a0467bc 100644
@@ -92,7 +92,7 @@ static int debug;
 static int  belkin_sa_startup(struct usb_serial *serial);
 static void belkin_sa_release(struct usb_serial *serial);
 static int  belkin_sa_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+			struct usb_serial_port *port);
 static void belkin_sa_close(struct usb_serial_port *port);
 static void belkin_sa_read_int_callback(struct urb *urb);
 static void belkin_sa_set_termios(struct tty_struct *tty,
@@ -213,7 +213,7 @@ static void belkin_sa_release(struct usb_serial *serial)
 
 
 static int  belkin_sa_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+					struct usb_serial_port *port)
 {
 	int retval = 0;
 
drivers/usb/serial/ch341.c +2 -3
index 2830766..8c894a7 100644
@@ -300,8 +300,7 @@ static void ch341_close(struct usb_serial_port *port)
 
 
 /* open this device, set default parameters */
-static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]);
@@ -333,7 +332,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
 		return -EPROTO;
 	}
 
-	r = usb_serial_generic_open(tty, port, filp);
+	r = usb_serial_generic_open(tty, port);
 
 out:	return r;
 }
drivers/usb/serial/console.c +2 -2
index 0e4f2e4..be086e4 100644
@@ -150,9 +150,9 @@ static int usb_console_setup(struct console *co, char *options)
 		/* only call the device specific open if this
 		 * is the first time the port is opened */
 		if (serial->type->open)
-			retval = serial->type->open(NULL, port, NULL);
+			retval = serial->type->open(NULL, port);
 		else
-			retval = usb_serial_generic_open(NULL, port, NULL);
+			retval = usb_serial_generic_open(NULL, port);
 
 		if (retval) {
 			err("could not open USB console port");
drivers/usb/serial/cp210x.c +2 -4
index b5275c4..4a208fe 100644
@@ -33,8 +33,7 @@
 /*
  * Function Prototypes
  */
-static int cp210x_open(struct tty_struct *, struct usb_serial_port *,
-							struct file *);
+static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
 static void cp210x_cleanup(struct usb_serial_port *);
 static void cp210x_close(struct usb_serial_port *);
 static void cp210x_get_termios(struct tty_struct *,
@@ -368,8 +367,7 @@ static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
 	return baud;
 }
 
-static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	int result;
drivers/usb/serial/cyberjack.c +2 -2
index 336523f..b0f6402 100644
@@ -61,7 +61,7 @@ static int cyberjack_startup(struct usb_serial *serial);
 static void cyberjack_disconnect(struct usb_serial *serial);
 static void cyberjack_release(struct usb_serial *serial);
 static int  cyberjack_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+	struct usb_serial_port *port);
 static void cyberjack_close(struct usb_serial_port *port);
 static int cyberjack_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count);
@@ -173,7 +173,7 @@ static void cyberjack_release(struct usb_serial *serial)
 }
 
 static int  cyberjack_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+					struct usb_serial_port *port)
 {
 	struct cyberjack_private *priv;
 	unsigned long flags;
drivers/usb/serial/cypress_m8.c +2 -4
index 59adfe1..df1adb9 100644
@@ -172,8 +172,7 @@ static int  cypress_earthmate_startup(struct usb_serial *serial);
 static int  cypress_hidcom_startup(struct usb_serial *serial);
 static int  cypress_ca42v2_startup(struct usb_serial *serial);
 static void cypress_release(struct usb_serial *serial);
-static int  cypress_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int  cypress_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void cypress_close(struct usb_serial_port *port);
 static void cypress_dtr_rts(struct usb_serial_port *port, int on);
 static int  cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -633,8 +632,7 @@ static void cypress_release(struct usb_serial *serial)
 }
 
 
-static int cypress_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	struct usb_serial *serial = port->serial;
drivers/usb/serial/digi_acceleport.c +2 -4
index f480809..ab3dd99 100644
@@ -453,8 +453,7 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
 static void digi_write_bulk_callback(struct urb *urb);
 static int digi_write_room(struct tty_struct *tty);
 static int digi_chars_in_buffer(struct tty_struct *tty);
-static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
-	struct file *filp);
+static int digi_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void digi_close(struct usb_serial_port *port);
 static int digi_carrier_raised(struct usb_serial_port *port);
 static void digi_dtr_rts(struct usb_serial_port *port, int on);
@@ -1347,8 +1346,7 @@ static int digi_carrier_raised(struct usb_serial_port *port)
 	return 0;
 }
 
-static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int ret;
 	unsigned char buf[32];
drivers/usb/serial/empeg.c +3 -5
index 80cb347..da559a7 100644
@@ -79,8 +79,7 @@ static int debug;
 #define EMPEG_PRODUCT_ID		0x0001
 
 /* function prototypes for an empeg-car player */
-static int  empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
-						struct file *filp);
+static int  empeg_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void empeg_close(struct usb_serial_port *port);
 static int  empeg_write(struct tty_struct *tty, struct usb_serial_port *port,
 						const unsigned char *buf,
@@ -142,8 +141,7 @@ static int		bytes_out;
 /******************************************************************************
  * Empeg specific driver functions
  ******************************************************************************/
-static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static int empeg_open(struct tty_struct *tty,struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	int result = 0;
@@ -151,7 +149,7 @@ static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
 	dbg("%s - port %d", __func__, port->number);
 
 	/* Force default termio settings */
-	empeg_set_termios(tty, port, NULL) ;
+	empeg_set_termios(tty, port, NULL);
 
 	bytes_in = 0;
 	bytes_out = 0;
drivers/usb/serial/ftdi_sio.c +2 -4
index 8fec5d4..76a17f9 100644
@@ -747,8 +747,7 @@ static int  ftdi_sio_probe(struct usb_serial *serial,
 					const struct usb_device_id *id);
 static int  ftdi_sio_port_probe(struct usb_serial_port *port);
 static int  ftdi_sio_port_remove(struct usb_serial_port *port);
-static int  ftdi_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int  ftdi_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void ftdi_close(struct usb_serial_port *port);
 static void ftdi_dtr_rts(struct usb_serial_port *port, int on);
 static int  ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -1680,8 +1679,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
 	return 0;
 }
 
-static int ftdi_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 { /* ftdi_open */
 	struct usb_device *dev = port->serial->dev;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
drivers/usb/serial/garmin_gps.c +1 -2
index 8839f1c..20432d3 100644
@@ -933,8 +933,7 @@ static int garmin_init_session(struct usb_serial_port *port)
 
 
 
-static int garmin_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int garmin_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	unsigned long flags;
 	int status = 0;
drivers/usb/serial/generic.c +1 -2
index ce57f6a..d9398e9 100644
@@ -114,8 +114,7 @@ void usb_serial_generic_deregister(void)
 #endif
 }
 
-int usb_serial_generic_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	int result = 0;
drivers/usb/serial/io_edgeport.c +2 -4
index 0191693..dc0f832 100644
@@ -205,8 +205,7 @@ static void edge_bulk_out_data_callback(struct urb *urb);
 static void edge_bulk_out_cmd_callback(struct urb *urb);
 
 /* function prototypes for the usbserial callbacks */
-static int edge_open(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filp);
+static int edge_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void edge_close(struct usb_serial_port *port);
 static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count);
@@ -852,8 +851,7 @@ static void edge_bulk_out_cmd_callback(struct urb *urb)
  *	If successful, we return 0
  *	Otherwise we return a negative error number.
  *****************************************************************************/
-static int edge_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	struct usb_serial *serial;
drivers/usb/serial/io_ti.c +1 -2
index e8bc42f..d4cc0f7 100644
@@ -1831,8 +1831,7 @@ static void edge_bulk_out_callback(struct urb *urb)
 	tty_kref_put(tty);
 }
 
-static int edge_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	struct edgeport_serial *edge_serial;
drivers/usb/serial/ipaq.c +2 -7
index 2545d45..24fcc64 100644
@@ -75,7 +75,7 @@ static int initial_wait;
 
 /* Function prototypes for an ipaq */
 static int  ipaq_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+			struct usb_serial_port *port);
 static void ipaq_close(struct usb_serial_port *port);
 static int  ipaq_calc_num_ports(struct usb_serial *serial);
 static int  ipaq_startup(struct usb_serial *serial);
@@ -587,7 +587,7 @@ static int		bytes_in;
 static int		bytes_out;
 
 static int ipaq_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+			struct usb_serial_port *port)
 {
 	struct usb_serial	*serial = port->serial;
 	struct ipaq_private	*priv;
@@ -628,11 +628,6 @@ static int ipaq_open(struct tty_struct *tty,
 		priv->free_len += PACKET_SIZE;
 	}
 
-	if (tty) {
-		/* FIXME: These two are bogus */
-		tty->raw = 1;
-		tty->real_raw = 1;
-	}
 	/*
 	 * Lose the small buffers usbserial provides. Make larger ones.
 	 */
drivers/usb/serial/ipw.c +1 -2
index 29ad038..727d323 100644
@@ -193,8 +193,7 @@ static void ipw_read_bulk_callback(struct urb *urb)
 	return;
 }
 
-static int ipw_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_device *dev = port->serial->dev;
 	u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT;
drivers/usb/serial/ir-usb.c +2 -4
index 66009b6..95d8d26 100644
@@ -86,8 +86,7 @@ static int buffer_size;
 static int xbof = -1;
 
 static int  ir_startup (struct usb_serial *serial);
-static int  ir_open(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filep);
+static int  ir_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void ir_close(struct usb_serial_port *port);
 static int  ir_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count);
@@ -296,8 +295,7 @@ static int ir_startup(struct usb_serial *serial)
 	return 0;
 }
 
-static int ir_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int ir_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	char *buffer;
 	int result = 0;
drivers/usb/serial/iuu_phoenix.c +2 -3
index 96873a7..f3f9be0 100644
@@ -1018,8 +1018,7 @@ static void iuu_close(struct usb_serial_port *port)
 	}
 }
 
-static int iuu_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	u8 *buf;
@@ -1077,7 +1076,7 @@ static int iuu_open(struct tty_struct *tty,
 		tty->termios->c_iflag = 0;
 		priv->termios_initialized = 1;
 		priv->poll = 0;
-	 }
+	}
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* initialize writebuf */
drivers/usb/serial/keyspan.c +1 -2
index 2594b87..f8c4b07 100644
@@ -1209,8 +1209,7 @@ static int keyspan_write_room(struct tty_struct *tty)
 }
 
 
-static int keyspan_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct keyspan_port_private 	*p_priv;
 	struct keyspan_serial_private 	*s_priv;
drivers/usb/serial/keyspan.h +1 -2
index 3107ed1..30771e5 100644
@@ -36,8 +36,7 @@
 
 /* Function prototypes for Keyspan serial converter */
 static int  keyspan_open		(struct tty_struct *tty,
-					 struct usb_serial_port *port,
-					 struct file *filp);
+					 struct usb_serial_port *port);
 static void keyspan_close		(struct usb_serial_port *port);
 static void keyspan_dtr_rts		(struct usb_serial_port *port, int on);
 static int  keyspan_startup		(struct usb_serial *serial);
drivers/usb/serial/keyspan_pda.c +1 -1
index d0b12e4..257c16c 100644
@@ -681,7 +681,7 @@ static int keyspan_pda_carrier_raised(struct usb_serial_port *port)
 
 
 static int keyspan_pda_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+					struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	unsigned char room;
drivers/usb/serial/kl5kusb105.c +2 -8
index 0f44bb8..a616731 100644
@@ -75,8 +75,7 @@ static int debug;
 static int  klsi_105_startup(struct usb_serial *serial);
 static void klsi_105_disconnect(struct usb_serial *serial);
 static void klsi_105_release(struct usb_serial *serial);
-static int  klsi_105_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void klsi_105_close(struct usb_serial_port *port);
 static int  klsi_105_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count);
@@ -358,8 +357,7 @@ static void klsi_105_release(struct usb_serial *serial)
 	}
 } /* klsi_105_release */
 
-static int  klsi_105_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
 	int retval = 0;
@@ -371,10 +369,6 @@ static int  klsi_105_open(struct tty_struct *tty,
 
 	dbg("%s port %d", __func__, port->number);
 
-	/* force low_latency on so that our tty_push actually forces
-	 * the data through
-	 * tty->low_latency = 1; */
-
 	/* Do a defined restart:
 	 * Set up sane default baud rate and send the 'READ_ON'
 	 * vendor command.
drivers/usb/serial/kobil_sct.c +2 -4
index 6db0e56..9790157 100644
@@ -70,8 +70,7 @@ static int debug;
 /* Function prototypes */
 static int  kobil_startup(struct usb_serial *serial);
 static void kobil_release(struct usb_serial *serial);
-static int  kobil_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int  kobil_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void kobil_close(struct usb_serial_port *port);
 static int  kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
 			 const unsigned char *buf, int count);
@@ -211,8 +210,7 @@ static void kobil_release(struct usb_serial *serial)
 }
 
 
-static int kobil_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int result = 0;
 	struct kobil_private *priv;
drivers/usb/serial/mct_u232.c +2 -4
index d8825e1..d501aef 100644
@@ -93,8 +93,7 @@ static int debug;
  */
 static int  mct_u232_startup(struct usb_serial *serial);
 static void mct_u232_release(struct usb_serial *serial);
-static int  mct_u232_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int  mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void mct_u232_close(struct usb_serial_port *port);
 static void mct_u232_dtr_rts(struct usb_serial_port *port, int on);
 static void mct_u232_read_int_callback(struct urb *urb);
@@ -421,8 +420,7 @@ static void mct_u232_release(struct usb_serial *serial)
 	}
 } /* mct_u232_release */
 
-static int  mct_u232_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int  mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
drivers/usb/serial/mos7720.c +1 -2
index 4342a8a..763e32a 100644
@@ -319,8 +319,7 @@ static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value,
 	return status;
 }
 
-static int mos7720_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial;
 	struct usb_serial_port *port0;
drivers/usb/serial/mos7840.c +1 -2
index b93f0f9..f11abf5 100644
@@ -824,8 +824,7 @@ static int mos7840_serial_probe(struct usb_serial *serial,
  *	Otherwise we return a negative error number.
  *****************************************************************************/
 
-static int mos7840_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int response;
 	int j;
drivers/usb/serial/navman.c +1 -2
index f5f3751..5ceaa4c 100644
@@ -80,8 +80,7 @@ exit:
 			__func__, result);
 }
 
-static int navman_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int navman_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int result = 0;
 
drivers/usb/serial/omninet.c +2 -4
index 56857dd..0622650 100644
@@ -64,8 +64,7 @@ static int debug;
 #define BT_IGNITIONPRO_ID	0x2000
 
 /* function prototypes */
-static int  omninet_open(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp);
+static int  omninet_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void omninet_close(struct usb_serial_port *port);
 static void omninet_read_bulk_callback(struct urb *urb);
 static void omninet_write_bulk_callback(struct urb *urb);
@@ -163,8 +162,7 @@ static int omninet_attach(struct usb_serial *serial)
 	return 0;
 }
 
-static int omninet_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial	*serial = port->serial;
 	struct usb_serial_port	*wport;
drivers/usb/serial/opticon.c +1 -2
index 336bba7..1085a57 100644
@@ -144,8 +144,7 @@ exit:
 	spin_unlock(&priv->lock);
 }
 
-static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port,
-			struct file *filp)
+static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct opticon_private *priv = usb_get_serial_data(port->serial);
 	unsigned long flags;
drivers/usb/serial/option.c +2 -4
index c784ddb..fe47051 100644
@@ -45,8 +45,7 @@
 /* Function prototypes */
 static int  option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id);
-static int  option_open(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp);
+static int  option_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void option_close(struct usb_serial_port *port);
 static void option_dtr_rts(struct usb_serial_port *port, int on);
 
@@ -961,8 +960,7 @@ static int option_chars_in_buffer(struct tty_struct *tty)
 	return data_len;
 }
 
-static int option_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int option_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct option_port_private *portdata;
 	int i, err;
drivers/usb/serial/oti6858.c +2 -4
index 3cece27..e90f88a 100644
@@ -141,8 +141,7 @@ struct oti6858_control_pkt {
 	  && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt))
 
 /* function prototypes */
-static int oti6858_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void oti6858_close(struct usb_serial_port *port);
 static void oti6858_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
@@ -566,8 +565,7 @@ static void oti6858_set_termios(struct tty_struct *tty,
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
-static int oti6858_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	struct ktermios tmp_termios;
drivers/usb/serial/pl2303.c +1 -4
index 3e86815..a63ea99 100644
@@ -691,8 +691,7 @@ static void pl2303_close(struct usb_serial_port *port)
 
 }
 
-static int pl2303_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
@@ -714,8 +713,6 @@ static int pl2303_open(struct tty_struct *tty,
 	if (tty)
 		pl2303_set_termios(tty, port, &tmp_termios);
 
-	/* FIXME: need to assert RTS and DTR if CRTSCTS off */
-
 	dbg("%s - submitting read urb", __func__);
 	port->read_urb->dev = serial->dev;
 	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
drivers/usb/serial/sierra.c +1 -2
index f48d05e..55391bb 100644
@@ -734,8 +734,7 @@ static void sierra_close(struct usb_serial_port *port)
 	}
 }
 
-static int sierra_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct sierra_port_private *portdata;
 	struct usb_serial *serial = port->serial;
drivers/usb/serial/spcp8x5.c +1 -4
index 3c249d8..8b312a0 100644
@@ -623,8 +623,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 
 /* open the serial port. do some usb system call. set termios and get the line
  * status of the device. then submit the read urb */
-static int spcp8x5_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
@@ -658,8 +657,6 @@ static int spcp8x5_open(struct tty_struct *tty,
 	priv->line_status = status & 0xf0 ;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/* FIXME: need to assert RTS and DTR if CRTSCTS off */
-
 	dbg("%s - submitting read urb", __func__);
 	port->read_urb->dev = serial->dev;
 	ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
drivers/usb/serial/symbolserial.c +1 -2
index 6157fac..cb7e95f 100644
@@ -124,8 +124,7 @@ exit:
 	spin_unlock(&priv->lock);
 }
 
-static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port,
-			struct file *filp)
+static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct symbol_private *priv = usb_get_serial_data(port->serial);
 	unsigned long flags;
drivers/usb/serial/ti_usb_3410_5052.c +2 -4
index 3bc609f..1e9dc88 100644
@@ -98,8 +98,7 @@ struct ti_device {
 
 static int ti_startup(struct usb_serial *serial);
 static void ti_release(struct usb_serial *serial);
-static int ti_open(struct tty_struct *tty, struct usb_serial_port *port,
-		struct file *file);
+static int ti_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void ti_close(struct usb_serial_port *port);
 static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
 		const unsigned char *data, int count);
@@ -492,8 +491,7 @@ static void ti_release(struct usb_serial *serial)
 }
 
 
-static int ti_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *file)
+static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	struct ti_device *tdev;
drivers/usb/serial/usb-serial.c +1 -1
index 31c7a09..3dda684 100644
@@ -244,7 +244,7 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
 
 		/* only call the device specific open if this
 		 * is the first time the port is opened */
-		retval = serial->type->open(tty, port, filp);
+		retval = serial->type->open(tty, port);
 		if (retval)
 			goto bailout_interface_put;
 		mutex_unlock(&serial->disc_mutex);
drivers/usb/serial/usb_debug.c +2 -3
index 6148009..7b5bfc4 100644
@@ -43,11 +43,10 @@ static struct usb_driver debug_driver = {
 	.no_dynamic_id = 	1,
 };
 
-static int usb_debug_open(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp)
+static int usb_debug_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	port->bulk_out_size = USB_DEBUG_MAX_PACKET_SIZE;
-	return usb_serial_generic_open(tty, port, filp);
+	return usb_serial_generic_open(tty, port);
 }
 
 /* This HW really does not support a serial break, so one will be
drivers/usb/serial/visor.c +2 -4
index f5d0f64..1aa5d20 100644
@@ -36,8 +36,7 @@
 #define DRIVER_DESC "USB HandSpring Visor / Palm OS driver"
 
 /* function prototypes for a handspring visor */
-static int  visor_open(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filp);
+static int  visor_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void visor_close(struct usb_serial_port *port);
 static int  visor_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count);
@@ -273,8 +272,7 @@ static int stats;
 /******************************************************************************
  * Handspring Visor specific driver functions
  ******************************************************************************/
-static int visor_open(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp)
+static int visor_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct visor_private *priv = usb_get_serial_port_data(port);
drivers/usb/serial/whiteheat.c +2 -3
index 8d126dd..81f2ae5 100644
@@ -146,7 +146,7 @@ static int  whiteheat_firmware_attach(struct usb_serial *serial);
 static int  whiteheat_attach(struct usb_serial *serial);
 static void whiteheat_release(struct usb_serial *serial);
 static int  whiteheat_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+			struct usb_serial_port *port);
 static void whiteheat_close(struct usb_serial_port *port);
 static int  whiteheat_write(struct tty_struct *tty,
 			struct usb_serial_port *port,
@@ -659,8 +659,7 @@ static void whiteheat_release(struct usb_serial *serial)
 	return;
 }
 
-static int whiteheat_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int		retval = 0;
 
include/linux/usb/serial.h +3 -4
index 0ec50ba..1cbaf4a 100644
@@ -238,9 +238,8 @@ struct usb_serial_driver {
 	int (*resume)(struct usb_serial *serial);
 
 	/* serial function calls */
-	/* Called by console with tty = NULL and by tty */
-	int  (*open)(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+	/* Called by console and by the tty layer */
+	int  (*open)(struct tty_struct *tty, struct usb_serial_port *port);
 	void (*close)(struct usb_serial_port *port);
 	int  (*write)(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count);
@@ -300,7 +299,7 @@ static inline void usb_serial_console_disconnect(struct usb_serial *serial) {}
 extern struct usb_serial *usb_serial_get_by_index(unsigned int minor);
 extern void usb_serial_put(struct usb_serial *serial);
 extern int usb_serial_generic_open(struct tty_struct *tty,
-		struct usb_serial_port *port, struct file *filp);
+	struct usb_serial_port *port);
 extern int usb_serial_generic_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count);
 extern void usb_serial_generic_close(struct usb_serial_port *port);
Signature · 1 line
1.6.4.2
#47 lore raw

PATCH 45/79 isicom: split the open method for the isicom device

In reply to Greg KH

From: Alan Cox <[email protected]>

Again moving towards being able to add a common open method

---
 drivers/char/isicom.c |   32 ++++++++++++++++++++++++--------
 1 files changed, 24 insertions(+), 8 deletions(-)
drivers/char/isicom.c +24 -8
index 08f5743..426bfdd 100644
@@ -846,37 +846,53 @@ static int isicom_carrier_raised(struct tty_port *port)
 	return (ip->status & ISI_DCD)?1 : 0;
 }
 
-static int isicom_open(struct tty_struct *tty, struct file *filp)
+static struct tty_port *isicom_find_port(struct tty_struct *tty)
 {
 	struct isi_port *port;
 	struct isi_board *card;
 	unsigned int board;
-	int error, line;
+	int line = tty->index;
 
-	line = tty->index;
 	if (line < 0 || line > PORT_COUNT-1)
-		return -ENODEV;
+		return NULL;
 	board = BOARD(line);
 	card = &isi_card[board];
 
 	if (!(card->status & FIRMWARE_LOADED))
-		return -ENODEV;
+		return NULL;
 
 	/*  open on a port greater than the port count for the card !!! */
 	if (line > ((board * 16) + card->port_count - 1))
-		return -ENODEV;
+		return NULL;
 
 	port = &isi_ports[line];
 	if (isicom_paranoia_check(port, tty->name, "isicom_open"))
-		return -ENODEV;
+		return NULL;
+
+	return &port->port;
+}
+	
+static int isicom_open(struct tty_struct *tty, struct file *filp)
+{
+	struct isi_port *port;
+	struct isi_board *card;
+	struct tty_port *tport;
+	int error = 0;
 
+	tport = isicom_find_port(tty);
+	if (tport == NULL)
+		return -ENODEV;
+	port = container_of(tport, struct isi_port, port);
+	card = &isi_card[BOARD(tty->index)];
 	isicom_setup_board(card);
 
 	/* FIXME: locking on port.count etc */
 	port->port.count++;
 	tty->driver_data = port;
 	tty_port_tty_set(&port->port, tty);
-	error = isicom_setup_port(tty);
+	/* FIXME: Locking on Initialized flag */
+	if (!test_bit(ASYNCB_INITIALIZED, &tport->flags))
+		error = isicom_setup_port(tty);
 	if (error == 0)
 		error = tty_port_block_til_ready(&port->port, tty, filp);
 	return error;
Signature · 1 line
1.6.4.2
#48 lore raw

PATCH 46/79 serial: kill off uart_info

In reply to Greg KH

From: Alan Cox <[email protected]>

We moved this into uart_state, now move the fields out of the separate structure and kill it off.

---
 arch/mn10300/kernel/asm-offsets.c       |    6 +-
 drivers/serial/21285.c                  |    8 +-
 drivers/serial/8250.c                   |   10 +-
 drivers/serial/amba-pl010.c             |    6 +-
 drivers/serial/amba-pl011.c             |    6 +-
 drivers/serial/atmel_serial.c           |   14 +-
 drivers/serial/bfin_5xx.c               |   20 +-
 drivers/serial/bfin_sport_uart.c        |    6 +-
 drivers/serial/clps711x.c               |    4 +-
 drivers/serial/cpm_uart/cpm_uart_core.c |    2 +-
 drivers/serial/dz.c                     |    6 +-
 drivers/serial/icom.c                   |   16 +-
 drivers/serial/imx.c                    |   16 +-
 drivers/serial/ioc3_serial.c            |   52 +++---
 drivers/serial/ioc4_serial.c            |   66 ++++----
 drivers/serial/ip22zilog.c              |   14 +-
 drivers/serial/jsm/jsm_neo.c            |    2 +-
 drivers/serial/jsm/jsm_tty.c            |   20 +-
 drivers/serial/m32r_sio.c               |    6 +-
 drivers/serial/max3100.c                |   16 +-
 drivers/serial/mcf.c                    |    4 +-
 drivers/serial/mpc52xx_uart.c           |    4 +-
 drivers/serial/mpsc.c                   |    4 +-
 drivers/serial/msm_serial.c             |    6 +-
 drivers/serial/mux.c                    |    4 +-
 drivers/serial/netx-serial.c            |    6 +-
 drivers/serial/nwpserial.c              |    4 +-
 drivers/serial/pmac_zilog.c             |   12 +-
 drivers/serial/pnx8xxx_uart.c           |    8 +-
 drivers/serial/pxa.c                    |    6 +-
 drivers/serial/sa1100.c                 |    8 +-
 drivers/serial/samsung.c                |    8 +-
 drivers/serial/sb1250-duart.c           |    6 +-
 drivers/serial/sc26xx.c                 |   10 +-
 drivers/serial/serial_core.c            |  286 +++++++++++++++----------------
 drivers/serial/serial_ks8695.c          |    6 +-
 drivers/serial/serial_lh7a40x.c         |    6 +-
 drivers/serial/serial_txx9.c            |    4 +-
 drivers/serial/sh-sci.c                 |   10 +-
 drivers/serial/sn_console.c             |   22 ++--
 drivers/serial/sunhv.c                  |    8 +-
 drivers/serial/sunsab.c                 |   10 +-
 drivers/serial/sunsu.c                  |    6 +-
 drivers/serial/sunzilog.c               |   14 +-
 drivers/serial/timbuart.c               |   10 +-
 drivers/serial/uartlite.c               |    6 +-
 drivers/serial/ucc_uart.c               |    4 +-
 drivers/serial/vr41xx_siu.c             |    6 +-
 drivers/serial/zs.c                     |    6 +-
 include/linux/serial_core.h             |   64 ++++----
 50 files changed, 422 insertions(+), 432 deletions(-)
arch/mn10300/kernel/asm-offsets.c +3 -3
index 2646fcb..82b4007 100644
@@ -95,7 +95,7 @@ void foo(void)
 	OFFSET(__iobase,		mn10300_serial_port, _iobase);
 
 	DEFINE(__UART_XMIT_SIZE,	UART_XMIT_SIZE);
-	OFFSET(__xmit_buffer,		uart_info, xmit.buf);
-	OFFSET(__xmit_head,		uart_info, xmit.head);
-	OFFSET(__xmit_tail,		uart_info, xmit.tail);
+	OFFSET(__xmit_buffer,		uart_state, xmit.buf);
+	OFFSET(__xmit_head,		uart_state, xmit.head);
+	OFFSET(__xmit_tail,		uart_state, xmit.tail);
 }
drivers/serial/21285.c +4 -4
index cb6d85d..1e3d193 100644
@@ -86,7 +86,7 @@ static void serial21285_enable_ms(struct uart_port *port)
 static irqreturn_t serial21285_rx_chars(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	unsigned int status, ch, flag, rxs, max_count = 256;
 
 	status = *CSR_UARTFLG;
@@ -124,7 +124,7 @@ static irqreturn_t serial21285_rx_chars(int irq, void *dev_id)
 static irqreturn_t serial21285_tx_chars(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 	int count = 256;
 
 	if (port->x_char) {
@@ -235,8 +235,8 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); 
 	quot = uart_get_divisor(port, baud);
 
-	if (port->info && port->info->port.tty) {
-		struct tty_struct *tty = port->info->port.tty;
+	if (port->state && port->state->port.tty) {
+		struct tty_struct *tty = port->state->port.tty;
 		unsigned int b = port->uartclk / (16 * quot);
 		tty_encode_baud_rate(tty, b, b);
 	}
drivers/serial/8250.c +5 -5
index 1fd4894..e415c5e 100644
@@ -1382,7 +1382,7 @@ static void serial8250_enable_ms(struct uart_port *port)
 static void
 receive_chars(struct uart_8250_port *up, unsigned int *status)
 {
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned char ch, lsr = *status;
 	int max_count = 256;
 	char flag;
@@ -1457,7 +1457,7 @@ ignore_char:
 
 static void transmit_chars(struct uart_8250_port *up)
 {
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 	int count;
 
 	if (up->port.x_char) {
@@ -1500,7 +1500,7 @@ static unsigned int check_modem_status(struct uart_8250_port *up)
 	status |= up->msr_saved_flags;
 	up->msr_saved_flags = 0;
 	if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
-	    up->port.info != NULL) {
+	    up->port.state != NULL) {
 		if (status & UART_MSR_TERI)
 			up->port.icount.rng++;
 		if (status & UART_MSR_DDSR)
@@ -1510,7 +1510,7 @@ static unsigned int check_modem_status(struct uart_8250_port *up)
 		if (status & UART_MSR_DCTS)
 			uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
 
-		wake_up_interruptible(&up->port.info->delta_msr_wait);
+		wake_up_interruptible(&up->port.state->delta_msr_wait);
 	}
 
 	return status;
@@ -1764,7 +1764,7 @@ static void serial8250_backup_timeout(unsigned long data)
 	up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
 	spin_unlock_irqrestore(&up->port.lock, flags);
 	if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) &&
-	    (!uart_circ_empty(&up->port.info->xmit) || up->port.x_char) &&
+	    (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) &&
 	    (lsr & UART_LSR_THRE)) {
 		iir &= ~(UART_IIR_ID | UART_IIR_NO_INT);
 		iir |= UART_IIR_THRI;
drivers/serial/amba-pl010.c +3 -3
index 58a4879..3903241 100644
@@ -117,7 +117,7 @@ static void pl010_enable_ms(struct uart_port *port)
 
 static void pl010_rx_chars(struct uart_amba_port *uap)
 {
-	struct tty_struct *tty = uap->port.info->port.tty;
+	struct tty_struct *tty = uap->port.state->port.tty;
 	unsigned int status, ch, flag, rsr, max_count = 256;
 
 	status = readb(uap->port.membase + UART01x_FR);
@@ -172,7 +172,7 @@ static void pl010_rx_chars(struct uart_amba_port *uap)
 
 static void pl010_tx_chars(struct uart_amba_port *uap)
 {
-	struct circ_buf *xmit = &uap->port.info->xmit;
+	struct circ_buf *xmit = &uap->port.state->xmit;
 	int count;
 
 	if (uap->port.x_char) {
@@ -225,7 +225,7 @@ static void pl010_modem_status(struct uart_amba_port *uap)
 	if (delta & UART01x_FR_CTS)
 		uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
 
-	wake_up_interruptible(&uap->port.info->delta_msr_wait);
+	wake_up_interruptible(&uap->port.state->delta_msr_wait);
 }
 
 static irqreturn_t pl010_int(int irq, void *dev_id)
drivers/serial/amba-pl011.c +3 -3
index 72ba0c6..ef82a34 100644
@@ -124,7 +124,7 @@ static void pl011_enable_ms(struct uart_port *port)
 
 static void pl011_rx_chars(struct uart_amba_port *uap)
 {
-	struct tty_struct *tty = uap->port.info->port.tty;
+	struct tty_struct *tty = uap->port.state->port.tty;
 	unsigned int status, ch, flag, max_count = 256;
 
 	status = readw(uap->port.membase + UART01x_FR);
@@ -175,7 +175,7 @@ static void pl011_rx_chars(struct uart_amba_port *uap)
 
 static void pl011_tx_chars(struct uart_amba_port *uap)
 {
-	struct circ_buf *xmit = &uap->port.info->xmit;
+	struct circ_buf *xmit = &uap->port.state->xmit;
 	int count;
 
 	if (uap->port.x_char) {
@@ -226,7 +226,7 @@ static void pl011_modem_status(struct uart_amba_port *uap)
 	if (delta & UART01x_FR_CTS)
 		uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
 
-	wake_up_interruptible(&uap->port.info->delta_msr_wait);
+	wake_up_interruptible(&uap->port.state->delta_msr_wait);
 }
 
 static irqreturn_t pl011_int(int irq, void *dev_id)
drivers/serial/atmel_serial.c +7 -7
index 607d43a..963e3c1 100644
@@ -427,7 +427,7 @@ static void atmel_rx_chars(struct uart_port *port)
  */
 static void atmel_tx_chars(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	if (port->x_char && UART_GET_CSR(port) & ATMEL_US_TXRDY) {
 		UART_PUT_CHAR(port, port->x_char);
@@ -560,7 +560,7 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
 static void atmel_tx_dma(struct uart_port *port)
 {
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 	struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
 	int count;
 
@@ -663,14 +663,14 @@ static void atmel_rx_from_ring(struct uart_port *port)
 	 * uart_start(), which takes the lock.
 	 */
 	spin_unlock(&port->lock);
-	tty_flip_buffer_push(port->info->port.tty);
+	tty_flip_buffer_push(port->state->port.tty);
 	spin_lock(&port->lock);
 }
 
 static void atmel_rx_from_dma(struct uart_port *port)
 {
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	struct atmel_dma_buffer *pdc;
 	int rx_idx = atmel_port->pdc_rx_idx;
 	unsigned int head;
@@ -776,7 +776,7 @@ static void atmel_tasklet_func(unsigned long data)
 		if (status_change & ATMEL_US_CTS)
 			uart_handle_cts_change(port, !(status & ATMEL_US_CTS));
 
-		wake_up_interruptible(&port->info->delta_msr_wait);
+		wake_up_interruptible(&port->state->delta_msr_wait);
 
 		atmel_port->irq_status_prev = status;
 	}
@@ -795,7 +795,7 @@ static void atmel_tasklet_func(unsigned long data)
 static int atmel_startup(struct uart_port *port)
 {
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	int retval;
 
 	/*
@@ -854,7 +854,7 @@ static int atmel_startup(struct uart_port *port)
 	}
 	if (atmel_use_dma_tx(port)) {
 		struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
-		struct circ_buf *xmit = &port->info->xmit;
+		struct circ_buf *xmit = &port->state->xmit;
 
 		pdc->buf = xmit->buf;
 		pdc->dma_addr = dma_map_single(port->dev,
drivers/serial/bfin_5xx.c +10 -10
index 4fff4e5..50abb7e 100644
@@ -144,7 +144,7 @@ static void bfin_serial_stop_tx(struct uart_port *port)
 {
 	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
 #ifdef CONFIG_SERIAL_BFIN_DMA
-	struct circ_buf *xmit = &uart->port.info->xmit;
+	struct circ_buf *xmit = &uart->port.state->xmit;
 #endif
 
 	while (!(UART_GET_LSR(uart) & TEMT))
@@ -171,7 +171,7 @@ static void bfin_serial_stop_tx(struct uart_port *port)
 static void bfin_serial_start_tx(struct uart_port *port)
 {
 	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
-	struct tty_struct *tty = uart->port.info->port.tty;
+	struct tty_struct *tty = uart->port.state->port.tty;
 
 #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
 	if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) {
@@ -243,10 +243,10 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
 			return;
 		}
 
-	if (!uart->port.info || !uart->port.info->port.tty)
+	if (!uart->port.state || !uart->port.state->port.tty)
 		return;
 #endif
-	tty = uart->port.info->port.tty;
+	tty = uart->port.state->port.tty;
 
 	if (ANOMALY_05000363) {
 		/* The BF533 (and BF561) family of processors have a nice anomaly
@@ -331,7 +331,7 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
 
 static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
 {
-	struct circ_buf *xmit = &uart->port.info->xmit;
+	struct circ_buf *xmit = &uart->port.state->xmit;
 
 	if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
 #ifdef CONFIG_BF54x
@@ -398,7 +398,7 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
 #ifdef CONFIG_SERIAL_BFIN_DMA
 static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
 {
-	struct circ_buf *xmit = &uart->port.info->xmit;
+	struct circ_buf *xmit = &uart->port.state->xmit;
 
 	uart->tx_done = 0;
 
@@ -436,7 +436,7 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
 
 static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
 {
-	struct tty_struct *tty = uart->port.info->port.tty;
+	struct tty_struct *tty = uart->port.state->port.tty;
 	int i, flg, status;
 
 	status = UART_GET_LSR(uart);
@@ -529,7 +529,7 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
 static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
 {
 	struct bfin_serial_port *uart = dev_id;
-	struct circ_buf *xmit = &uart->port.info->xmit;
+	struct circ_buf *xmit = &uart->port.state->xmit;
 
 #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
 	if (uart->scts && !(bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
@@ -965,10 +965,10 @@ static void bfin_serial_set_ldisc(struct uart_port *port)
 	int line = port->line;
 	unsigned short val;
 
-	if (line >= port->info->port.tty->driver->num)
+	if (line >= port->state->port.tty->driver->num)
 		return;
 
-	switch (port->info->port.tty->termios->c_line) {
+	switch (port->state->port.tty->termios->c_line) {
 	case N_IRDA:
 		val = UART_GET_GCTL(&bfin_serial_ports[line]);
 		val |= (IREN | RPOLC);
drivers/serial/bfin_sport_uart.c +3 -3
index c108b1a..088bb35 100644
@@ -178,7 +178,7 @@ static int sport_uart_setup(struct sport_uart_port *up, int sclk, int baud_rate)
 static irqreturn_t sport_uart_rx_irq(int irq, void *dev_id)
 {
 	struct sport_uart_port *up = dev_id;
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned int ch;
 
 	do {
@@ -205,7 +205,7 @@ static irqreturn_t sport_uart_tx_irq(int irq, void *dev_id)
 static irqreturn_t sport_uart_err_irq(int irq, void *dev_id)
 {
 	struct sport_uart_port *up = dev_id;
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned int stat = SPORT_GET_STAT(up);
 
 	/* Overflow in RX FIFO */
@@ -290,7 +290,7 @@ fail1:
 
 static void sport_uart_tx_chars(struct sport_uart_port *up)
 {
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 
 	if (SPORT_GET_STAT(up) & TXF)
 		return;
drivers/serial/clps711x.c +2 -2
index 80e7642..b6acd19 100644
@@ -93,7 +93,7 @@ static void clps711xuart_enable_ms(struct uart_port *port)
 static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	unsigned int status, ch, flg;
 
 	status = clps_readl(SYSFLG(port));
@@ -147,7 +147,7 @@ static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id)
 static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 	int count;
 
 	if (port->x_char) {
drivers/serial/cpm_uart/cpm_uart_core.c +1 -1
index f8df068..8d349b2 100644
@@ -244,7 +244,7 @@ static void cpm_uart_int_rx(struct uart_port *port)
 	int i;
 	unsigned char ch;
 	u8 *cp;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
 	cbd_t __iomem *bdp;
 	u16 status;
drivers/serial/dz.c +3 -3
index 6042b87..57421d7 100644
@@ -197,7 +197,7 @@ static inline void dz_receive_chars(struct dz_mux *mux)
 	while ((status = dz_in(dport, DZ_RBUF)) & DZ_DVAL) {
 		dport = &mux->dport[LINE(status)];
 		uport = &dport->port;
-		tty = uport->info->port.tty;	/* point to the proper dev */
+		tty = uport->state->port.tty;	/* point to the proper dev */
 
 		ch = UCHAR(status);		/* grab the char */
 		flag = TTY_NORMAL;
@@ -249,7 +249,7 @@ static inline void dz_receive_chars(struct dz_mux *mux)
 	}
 	for (i = 0; i < DZ_NB_PORT; i++)
 		if (lines_rx[i])
-			tty_flip_buffer_push(mux->dport[i].port.info->port.tty);
+			tty_flip_buffer_push(mux->dport[i].port.state->port.tty);
 }
 
 /*
@@ -268,7 +268,7 @@ static inline void dz_transmit_chars(struct dz_mux *mux)
 
 	status = dz_in(dport, DZ_CSR);
 	dport = &mux->dport[LINE(status)];
-	xmit = &dport->port.info->xmit;
+	xmit = &dport->port.state->xmit;
 
 	if (dport->port.x_char) {		/* XON/XOFF chars */
 		dz_out(dport, DZ_TDR, dport->port.x_char);
drivers/serial/icom.c +8 -8
index 060f4e3..f86c47e 100644
@@ -627,7 +627,7 @@ static int icom_write(struct uart_port *port)
 	unsigned long data_count;
 	unsigned char cmdReg;
 	unsigned long offset;
-	int temp_tail = port->info->xmit.tail;
+	int temp_tail = port->state->xmit.tail;
 
 	trace(ICOM_PORT, "WRITE", 0);
 
@@ -638,11 +638,11 @@ static int icom_write(struct uart_port *port)
 	}
 
 	data_count = 0;
-	while ((port->info->xmit.head != temp_tail) &&
+	while ((port->state->xmit.head != temp_tail) &&
 	       (data_count <= XMIT_BUFF_SZ)) {
 
 		ICOM_PORT->xmit_buf[data_count++] =
-		    port->info->xmit.buf[temp_tail];
+		    port->state->xmit.buf[temp_tail];
 
 		temp_tail++;
 		temp_tail &= (UART_XMIT_SIZE - 1);
@@ -694,7 +694,7 @@ static inline void check_modem_status(struct icom_port *icom_port)
 			uart_handle_cts_change(&icom_port->uart_port,
 					       delta_status & ICOM_CTS);
 
-		wake_up_interruptible(&icom_port->uart_port.info->
+		wake_up_interruptible(&icom_port->uart_port.state->
 				      delta_msr_wait);
 		old_status = status;
 	}
@@ -718,10 +718,10 @@ static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port)
 		icom_port->uart_port.icount.tx += count;
 
 		for (i=0; i<count &&
-			!uart_circ_empty(&icom_port->uart_port.info->xmit); i++) {
+			!uart_circ_empty(&icom_port->uart_port.state->xmit); i++) {
 
-			icom_port->uart_port.info->xmit.tail++;
-			icom_port->uart_port.info->xmit.tail &=
+			icom_port->uart_port.state->xmit.tail++;
+			icom_port->uart_port.state->xmit.tail &=
 				(UART_XMIT_SIZE - 1);
 		}
 
@@ -735,7 +735,7 @@ static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port)
 static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port)
 {
 	short int count, rcv_buff;
-	struct tty_struct *tty = icom_port->uart_port.info->port.tty;
+	struct tty_struct *tty = icom_port->uart_port.state->port.tty;
 	unsigned short int status;
 	struct uart_icount *icount;
 	unsigned long offset;
drivers/serial/imx.c +8 -8
index 7485afd..1febeaf 100644
@@ -224,7 +224,7 @@ static void imx_mctrl_check(struct imx_port *sport)
 	if (changed & TIOCM_CTS)
 		uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
 
-	wake_up_interruptible(&sport->port.info->delta_msr_wait);
+	wake_up_interruptible(&sport->port.state->delta_msr_wait);
 }
 
 /*
@@ -236,7 +236,7 @@ static void imx_timeout(unsigned long data)
 	struct imx_port *sport = (struct imx_port *)data;
 	unsigned long flags;
 
-	if (sport->port.info) {
+	if (sport->port.state) {
 		spin_lock_irqsave(&sport->port.lock, flags);
 		imx_mctrl_check(sport);
 		spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -323,7 +323,7 @@ static void imx_enable_ms(struct uart_port *port)
 
 static inline void imx_transmit_buffer(struct imx_port *sport)
 {
-	struct circ_buf *xmit = &sport->port.info->xmit;
+	struct circ_buf *xmit = &sport->port.state->xmit;
 
 	while (!(readl(sport->port.membase + UTS) & UTS_TXFULL)) {
 		/* send xmit->buf[xmit->tail]
@@ -388,7 +388,7 @@ static irqreturn_t imx_rtsint(int irq, void *dev_id)
 
 	writel(USR1_RTSD, sport->port.membase + USR1);
 	uart_handle_cts_change(&sport->port, !!val);
-	wake_up_interruptible(&sport->port.info->delta_msr_wait);
+	wake_up_interruptible(&sport->port.state->delta_msr_wait);
 
 	spin_unlock_irqrestore(&sport->port.lock, flags);
 	return IRQ_HANDLED;
@@ -397,7 +397,7 @@ static irqreturn_t imx_rtsint(int irq, void *dev_id)
 static irqreturn_t imx_txint(int irq, void *dev_id)
 {
 	struct imx_port *sport = dev_id;
-	struct circ_buf *xmit = &sport->port.info->xmit;
+	struct circ_buf *xmit = &sport->port.state->xmit;
 	unsigned long flags;
 
 	spin_lock_irqsave(&sport->port.lock,flags);
@@ -427,7 +427,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
 {
 	struct imx_port *sport = dev_id;
 	unsigned int rx,flg,ignored = 0;
-	struct tty_struct *tty = sport->port.info->port.tty;
+	struct tty_struct *tty = sport->port.state->port.tty;
 	unsigned long flags, temp;
 
 	spin_lock_irqsave(&sport->port.lock,flags);
@@ -900,11 +900,11 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 	rational_best_approximation(16 * div * baud, sport->port.uartclk,
 		1 << 16, 1 << 16, &num, &denom);
 
-	if (port->info && port->info->port.tty) {
+	if (port->state && port->state->port.tty) {
 		tdiv64 = sport->port.uartclk;
 		tdiv64 *= num;
 		do_div(tdiv64, denom * 16 * div);
-		tty_encode_baud_rate(sport->port.info->port.tty,
+		tty_encode_baud_rate(sport->port.state->port.tty,
 				(speed_t)tdiv64, (speed_t)tdiv64);
 	}
 
drivers/serial/ioc3_serial.c +26 -26

142 lines not on this page · raw message

drivers/serial/ioc4_serial.c +33 -33

185 lines not on this page · raw message

drivers/serial/ip22zilog.c +7 -7
index 0d9acbd..2e847de 100644
@@ -256,9 +256,9 @@ static struct tty_struct *ip22zilog_receive_chars(struct uart_ip22zilog_port *up
 	unsigned int r1;
 
 	tty = NULL;
-	if (up->port.info != NULL &&
-	    up->port.info->port.tty != NULL)
-		tty = up->port.info->port.tty;
+	if (up->port.state != NULL &&
+	    up->port.state->port.tty != NULL)
+		tty = up->port.state->port.tty;
 
 	for (;;) {
 		ch = readb(&channel->control);
@@ -354,7 +354,7 @@ static void ip22zilog_status_handle(struct uart_ip22zilog_port *up,
 			uart_handle_cts_change(&up->port,
 					       (status & CTS));
 
-		wake_up_interruptible(&up->port.info->delta_msr_wait);
+		wake_up_interruptible(&up->port.state->delta_msr_wait);
 	}
 
 	up->prev_status = status;
@@ -404,9 +404,9 @@ static void ip22zilog_transmit_chars(struct uart_ip22zilog_port *up,
 		return;
 	}
 
-	if (up->port.info == NULL)
+	if (up->port.state == NULL)
 		goto ack_tx_int;
-	xmit = &up->port.info->xmit;
+	xmit = &up->port.state->xmit;
 	if (uart_circ_empty(xmit))
 		goto ack_tx_int;
 	if (uart_tx_stopped(&up->port))
@@ -607,7 +607,7 @@ static void ip22zilog_start_tx(struct uart_port *port)
 		port->icount.tx++;
 		port->x_char = 0;
 	} else {
-		struct circ_buf *xmit = &port->info->xmit;
+		struct circ_buf *xmit = &port->state->xmit;
 
 		writeb(xmit->buf[xmit->tail], &channel->data);
 		ZSDELAY();
drivers/serial/jsm/jsm_neo.c +1 -1
index 9dadaa1..b4b124e 100644
@@ -989,7 +989,7 @@ static void neo_param(struct jsm_channel *ch)
 			{     50, B50     },
 		};
 
-		cflag = C_BAUD(ch->uart_port.info->port.tty);
+		cflag = C_BAUD(ch->uart_port.state->port.tty);
 		baud = 9600;
 		for (i = 0; i < ARRAY_SIZE(baud_rates); i++) {
 			if (baud_rates[i].cflag == cflag) {
drivers/serial/jsm/jsm_tty.c +10 -10
index 00f4577..7439c03 100644
@@ -147,7 +147,7 @@ static void jsm_tty_send_xchar(struct uart_port *port, char ch)
 	struct ktermios *termios;
 
 	spin_lock_irqsave(&port->lock, lock_flags);
-	termios = port->info->port.tty->termios;
+	termios = port->state->port.tty->termios;
 	if (ch == termios->c_cc[VSTART])
 		channel->ch_bd->bd_ops->send_start_character(channel);
 
@@ -245,7 +245,7 @@ static int jsm_tty_open(struct uart_port *port)
 	channel->ch_cached_lsr = 0;
 	channel->ch_stops_sent = 0;
 
-	termios = port->info->port.tty->termios;
+	termios = port->state->port.tty->termios;
 	channel->ch_c_cflag	= termios->c_cflag;
 	channel->ch_c_iflag	= termios->c_iflag;
 	channel->ch_c_oflag	= termios->c_oflag;
@@ -278,7 +278,7 @@ static void jsm_tty_close(struct uart_port *port)
 	jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n");
 
 	bd = channel->ch_bd;
-	ts = port->info->port.tty->termios;
+	ts = port->state->port.tty->termios;
 
 	channel->ch_flags &= ~(CH_STOPI);
 
@@ -530,7 +530,7 @@ void jsm_input(struct jsm_channel *ch)
 	if (!ch)
 		return;
 
-	tp = ch->uart_port.info->port.tty;
+	tp = ch->uart_port.state->port.tty;
 
 	bd = ch->ch_bd;
 	if(!bd)
@@ -849,7 +849,7 @@ int jsm_tty_write(struct uart_port *port)
 	u16 tail;
 	u16 tmask;
 	u32 remain;
-	int temp_tail = port->info->xmit.tail;
+	int temp_tail = port->state->xmit.tail;
 	struct jsm_channel *channel = (struct jsm_channel *)port;
 
 	tmask = WQUEUEMASK;
@@ -865,10 +865,10 @@ int jsm_tty_write(struct uart_port *port)
 	data_count = 0;
 	if (bufcount >= remain) {
 		bufcount -= remain;
-		while ((port->info->xmit.head != temp_tail) &&
+		while ((port->state->xmit.head != temp_tail) &&
 		(data_count < remain)) {
 			channel->ch_wqueue[head++] =
-			port->info->xmit.buf[temp_tail];
+			port->state->xmit.buf[temp_tail];
 
 			temp_tail++;
 			temp_tail &= (UART_XMIT_SIZE - 1);
@@ -880,10 +880,10 @@ int jsm_tty_write(struct uart_port *port)
 	data_count1 = 0;
 	if (bufcount > 0) {
 		remain = bufcount;
-		while ((port->info->xmit.head != temp_tail) &&
+		while ((port->state->xmit.head != temp_tail) &&
 			(data_count1 < remain)) {
 			channel->ch_wqueue[head++] =
-				port->info->xmit.buf[temp_tail];
+				port->state->xmit.buf[temp_tail];
 
 			temp_tail++;
 			temp_tail &= (UART_XMIT_SIZE - 1);
@@ -892,7 +892,7 @@ int jsm_tty_write(struct uart_port *port)
 		}
 	}
 
-	port->info->xmit.tail = temp_tail;
+	port->state->xmit.tail = temp_tail;
 
 	data_count += data_count1;
 	if (data_count) {
drivers/serial/m32r_sio.c +3 -3
index 611c97a..bea5c21 100644
@@ -286,7 +286,7 @@ static void m32r_sio_start_tx(struct uart_port *port)
 {
 #ifdef CONFIG_SERIAL_M32R_PLDSIO
 	struct uart_sio_port *up = (struct uart_sio_port *)port;
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 
 	if (!(up->ier & UART_IER_THRI)) {
 		up->ier |= UART_IER_THRI;
@@ -325,7 +325,7 @@ static void m32r_sio_enable_ms(struct uart_port *port)
 
 static void receive_chars(struct uart_sio_port *up, int *status)
 {
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned char ch;
 	unsigned char flag;
 	int max_count = 256;
@@ -398,7 +398,7 @@ static void receive_chars(struct uart_sio_port *up, int *status)
 
 static void transmit_chars(struct uart_sio_port *up)
 {
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 	int count;
 
 	if (up->port.x_char) {
drivers/serial/max3100.c +8 -8
index 9fd33e5..75ab006 100644
@@ -184,7 +184,7 @@ static void max3100_timeout(unsigned long data)
 {
 	struct max3100_port *s = (struct max3100_port *)data;
 
-	if (s->port.info) {
+	if (s->port.state) {
 		max3100_dowork(s);
 		mod_timer(&s->timer, jiffies + s->poll_time);
 	}
@@ -261,7 +261,7 @@ static void max3100_work(struct work_struct *w)
 	int rxchars;
 	u16 tx, rx;
 	int conf, cconf, rts, crts;
-	struct circ_buf *xmit = &s->port.info->xmit;
+	struct circ_buf *xmit = &s->port.state->xmit;
 
 	dev_dbg(&s->spi->dev, "%s\n", __func__);
 
@@ -307,8 +307,8 @@ static void max3100_work(struct work_struct *w)
 			}
 		}
 
-		if (rxchars > 16 && s->port.info->port.tty != NULL) {
-			tty_flip_buffer_push(s->port.info->port.tty);
+		if (rxchars > 16 && s->port.state->port.tty != NULL) {
+			tty_flip_buffer_push(s->port.state->port.tty);
 			rxchars = 0;
 		}
 		if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -320,8 +320,8 @@ static void max3100_work(struct work_struct *w)
 		  (!uart_circ_empty(xmit) &&
 		   !uart_tx_stopped(&s->port))));
 
-	if (rxchars > 0 && s->port.info->port.tty != NULL)
-		tty_flip_buffer_push(s->port.info->port.tty);
+	if (rxchars > 0 && s->port.state->port.tty != NULL)
+		tty_flip_buffer_push(s->port.state->port.tty);
 }
 
 static irqreturn_t max3100_irq(int irqno, void *dev_id)
@@ -429,7 +429,7 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios,
 	int baud = 0;
 	unsigned cflag;
 	u32 param_new, param_mask, parity = 0;
-	struct tty_struct *tty = s->port.info->port.tty;
+	struct tty_struct *tty = s->port.state->port.tty;
 
 	dev_dbg(&s->spi->dev, "%s\n", __func__);
 	if (!tty)
@@ -529,7 +529,7 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios,
 			MAX3100_STATUS_OE;
 
 	/* we are sending char from a workqueue so enable */
-	s->port.info->port.tty->low_latency = 1;
+	s->port.state->port.tty->low_latency = 1;
 
 	if (s->poll_time > 0)
 		del_timer_sync(&s->timer);
drivers/serial/mcf.c +2 -2
index 0eefb07..b443824 100644
@@ -323,7 +323,7 @@ static void mcf_rx_chars(struct mcf_uart *pp)
 		uart_insert_char(port, status, MCFUART_USR_RXOVERRUN, ch, flag);
 	}
 
-	tty_flip_buffer_push(port->info->port.tty);
+	tty_flip_buffer_push(port->state->port.tty);
 }
 
 /****************************************************************************/
@@ -331,7 +331,7 @@ static void mcf_rx_chars(struct mcf_uart *pp)
 static void mcf_tx_chars(struct mcf_uart *pp)
 {
 	struct uart_port *port = &pp->port;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	if (port->x_char) {
 		/* Send special char - probably flow control */
drivers/serial/mpc52xx_uart.c +2 -2
index abbd146..d7bcd07 100644
@@ -745,7 +745,7 @@ static struct uart_ops mpc52xx_uart_ops = {
 static inline int
 mpc52xx_uart_int_rx_chars(struct uart_port *port)
 {
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	unsigned char ch, flag;
 	unsigned short status;
 
@@ -812,7 +812,7 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
 static inline int
 mpc52xx_uart_int_tx_chars(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	/* Process out of band chars */
 	if (port->x_char) {
drivers/serial/mpsc.c +2 -2
index 61d3ade..b5496c2 100644
@@ -936,7 +936,7 @@ static int serial_polled;
 static int mpsc_rx_intr(struct mpsc_port_info *pi)
 {
 	struct mpsc_rx_desc *rxre;
-	struct tty_struct *tty = pi->port.info->port.tty;
+	struct tty_struct *tty = pi->port.state->port.tty;
 	u32	cmdstat, bytes_in, i;
 	int	rc = 0;
 	u8	*bp;
@@ -1109,7 +1109,7 @@ static void mpsc_setup_tx_desc(struct mpsc_port_info *pi, u32 count, u32 intr)
 
 static void mpsc_copy_tx_data(struct mpsc_port_info *pi)
 {
-	struct circ_buf *xmit = &pi->port.info->xmit;
+	struct circ_buf *xmit = &pi->port.state->xmit;
 	u8 *bp;
 	u32 i;
 
drivers/serial/msm_serial.c +3 -3
index f7c24ba..ff18d50 100644
@@ -88,7 +88,7 @@ static void msm_enable_ms(struct uart_port *port)
 
 static void handle_rx(struct uart_port *port)
 {
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	unsigned int sr;
 
 	/*
@@ -136,7 +136,7 @@ static void handle_rx(struct uart_port *port)
 
 static void handle_tx(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 	struct msm_port *msm_port = UART_TO_MSM(port);
 	int sent_tx;
 
@@ -169,7 +169,7 @@ static void handle_delta_cts(struct uart_port *port)
 {
 	msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
 	port->icount.cts++;
-	wake_up_interruptible(&port->info->delta_msr_wait);
+	wake_up_interruptible(&port->state->delta_msr_wait);
 }
 
 static irqreturn_t msm_irq(int irq, void *dev_id)
drivers/serial/mux.c +2 -2
index 953a5ff..7571aaa 100644
@@ -199,7 +199,7 @@ static void mux_break_ctl(struct uart_port *port, int break_state)
 static void mux_write(struct uart_port *port)
 {
 	int count;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	if(port->x_char) {
 		UART_PUT_CHAR(port, port->x_char);
@@ -243,7 +243,7 @@ static void mux_write(struct uart_port *port)
 static void mux_read(struct uart_port *port)
 {
 	int data;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	__u32 start_count = port->icount.rx;
 
 	while(1) {
drivers/serial/netx-serial.c +3 -3
index 3e5dda8..7735c9f 100644
@@ -140,7 +140,7 @@ static void netx_enable_ms(struct uart_port *port)
 
 static inline void netx_transmit_buffer(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	if (port->x_char) {
 		writel(port->x_char, port->membase + UART_DR);
@@ -185,7 +185,7 @@ static unsigned int netx_tx_empty(struct uart_port *port)
 
 static void netx_txint(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
 		netx_stop_tx(port);
@@ -201,7 +201,7 @@ static void netx_txint(struct uart_port *port)
 static void netx_rxint(struct uart_port *port)
 {
 	unsigned char rx, flg, status;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 
 	while (!(readl(port->membase + UART_FR) & FR_RXFE)) {
 		rx = readl(port->membase + UART_DR);
drivers/serial/nwpserial.c +2 -2
index 9e150b1..e1ab8ec 100644
@@ -126,7 +126,7 @@ static void nwpserial_config_port(struct uart_port *port, int flags)
 static irqreturn_t nwpserial_interrupt(int irq, void *dev_id)
 {
 	struct nwpserial_port *up = dev_id;
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	irqreturn_t ret;
 	unsigned int iir;
 	unsigned char ch;
@@ -261,7 +261,7 @@ static void nwpserial_start_tx(struct uart_port *port)
 	struct nwpserial_port *up;
 	struct circ_buf *xmit;
 	up = container_of(port, struct nwpserial_port, port);
-	xmit  = &up->port.info->xmit;
+	xmit  = &up->port.state->xmit;
 
 	if (port->x_char) {
 		nwpserial_putchar(up, up->port.x_char);
drivers/serial/pmac_zilog.c +6 -6
index 9c1243f..ab4c85b 100644
@@ -242,12 +242,12 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
 	}
 
 	/* Sanity check, make sure the old bug is no longer happening */
-	if (uap->port.info == NULL || uap->port.info->port.tty == NULL) {
+	if (uap->port.state == NULL || uap->port.state->port.tty == NULL) {
 		WARN_ON(1);
 		(void)read_zsdata(uap);
 		return NULL;
 	}
-	tty = uap->port.info->port.tty;
+	tty = uap->port.state->port.tty;
 
 	while (1) {
 		error = 0;
@@ -369,7 +369,7 @@ static void pmz_status_handle(struct uart_pmac_port *uap)
 			uart_handle_cts_change(&uap->port,
 					       !(status & CTS));
 
-		wake_up_interruptible(&uap->port.info->delta_msr_wait);
+		wake_up_interruptible(&uap->port.state->delta_msr_wait);
 	}
 
 	if (status & BRK_ABRT)
@@ -420,9 +420,9 @@ static void pmz_transmit_chars(struct uart_pmac_port *uap)
 		return;
 	}
 
-	if (uap->port.info == NULL)
+	if (uap->port.state == NULL)
 		goto ack_tx_int;
-	xmit = &uap->port.info->xmit;
+	xmit = &uap->port.state->xmit;
 	if (uart_circ_empty(xmit)) {
 		uart_write_wakeup(&uap->port);
 		goto ack_tx_int;
@@ -655,7 +655,7 @@ static void pmz_start_tx(struct uart_port *port)
 		port->icount.tx++;
 		port->x_char = 0;
 	} else {
-		struct circ_buf *xmit = &port->info->xmit;
+		struct circ_buf *xmit = &port->state->xmit;
 
 		write_zsdata(uap, xmit->buf[xmit->tail]);
 		zssync(uap);
drivers/serial/pnx8xxx_uart.c +4 -4
index 1bb8f1b..2da7476 100644
@@ -100,7 +100,7 @@ static void pnx8xxx_mctrl_check(struct pnx8xxx_port *sport)
 	if (changed & TIOCM_CTS)
 		uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
 
-	wake_up_interruptible(&sport->port.info->delta_msr_wait);
+	wake_up_interruptible(&sport->port.state->delta_msr_wait);
 }
 
 /*
@@ -112,7 +112,7 @@ static void pnx8xxx_timeout(unsigned long data)
 	struct pnx8xxx_port *sport = (struct pnx8xxx_port *)data;
 	unsigned long flags;
 
-	if (sport->port.info) {
+	if (sport->port.state) {
 		spin_lock_irqsave(&sport->port.lock, flags);
 		pnx8xxx_mctrl_check(sport);
 		spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -181,7 +181,7 @@ static void pnx8xxx_enable_ms(struct uart_port *port)
 
 static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport)
 {
-	struct tty_struct *tty = sport->port.info->port.tty;
+	struct tty_struct *tty = sport->port.state->port.tty;
 	unsigned int status, ch, flg;
 
 	status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) |
@@ -243,7 +243,7 @@ static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport)
 
 static void pnx8xxx_tx_chars(struct pnx8xxx_port *sport)
 {
-	struct circ_buf *xmit = &sport->port.info->xmit;
+	struct circ_buf *xmit = &sport->port.state->xmit;
 
 	if (sport->port.x_char) {
 		serial_out(sport, PNX8XXX_FIFO, sport->port.x_char);
drivers/serial/pxa.c +3 -3
index a48a8a1..ad48919 100644
@@ -96,7 +96,7 @@ static void serial_pxa_stop_rx(struct uart_port *port)
 
 static inline void receive_chars(struct uart_pxa_port *up, int *status)
 {
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned int ch, flag;
 	int max_count = 256;
 
@@ -161,7 +161,7 @@ static inline void receive_chars(struct uart_pxa_port *up, int *status)
 
 static void transmit_chars(struct uart_pxa_port *up)
 {
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 	int count;
 
 	if (up->port.x_char) {
@@ -220,7 +220,7 @@ static inline void check_modem_status(struct uart_pxa_port *up)
 	if (status & UART_MSR_DCTS)
 		uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
 
-	wake_up_interruptible(&up->port.info->delta_msr_wait);
+	wake_up_interruptible(&up->port.state->delta_msr_wait);
 }
 
 /*
drivers/serial/sa1100.c +4 -4
index 94530f0..61ef3ae 100644
@@ -117,7 +117,7 @@ static void sa1100_mctrl_check(struct sa1100_port *sport)
 	if (changed & TIOCM_CTS)
 		uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
 
-	wake_up_interruptible(&sport->port.info->delta_msr_wait);
+	wake_up_interruptible(&sport->port.state->delta_msr_wait);
 }
 
 /*
@@ -129,7 +129,7 @@ static void sa1100_timeout(unsigned long data)
 	struct sa1100_port *sport = (struct sa1100_port *)data;
 	unsigned long flags;
 
-	if (sport->port.info) {
+	if (sport->port.state) {
 		spin_lock_irqsave(&sport->port.lock, flags);
 		sa1100_mctrl_check(sport);
 		spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -189,7 +189,7 @@ static void sa1100_enable_ms(struct uart_port *port)
 static void
 sa1100_rx_chars(struct sa1100_port *sport)
 {
-	struct tty_struct *tty = sport->port.info->port.tty;
+	struct tty_struct *tty = sport->port.state->port.tty;
 	unsigned int status, ch, flg;
 
 	status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) |
@@ -239,7 +239,7 @@ sa1100_rx_chars(struct sa1100_port *sport)
 
 static void sa1100_tx_chars(struct sa1100_port *sport)
 {
-	struct circ_buf *xmit = &sport->port.info->xmit;
+	struct circ_buf *xmit = &sport->port.state->xmit;
 
 	if (sport->port.x_char) {
 		UART_PUT_CHAR(sport, sport->port.x_char);
drivers/serial/samsung.c +4 -4
index c8851a0..1523e8d 100644
@@ -196,7 +196,7 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id)
 {
 	struct s3c24xx_uart_port *ourport = dev_id;
 	struct uart_port *port = &ourport->port;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	unsigned int ufcon, ch, flag, ufstat, uerstat;
 	int max_count = 64;
 
@@ -281,7 +281,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
 {
 	struct s3c24xx_uart_port *ourport = id;
 	struct uart_port *port = &ourport->port;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 	int count = 256;
 
 	if (port->x_char) {
@@ -992,10 +992,10 @@ static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
 		struct ktermios *termios;
 		struct tty_struct *tty;
 
-		if (uport->info == NULL)
+		if (uport->state == NULL)
 			goto exit;
 
-		tty = uport->info->port.tty;
+		tty = uport->state->port.tty;
 
 		if (tty == NULL)
 			goto exit;
drivers/serial/sb1250-duart.c +3 -3
index 319e8b8..fa5f303 100644
@@ -384,13 +384,13 @@ static void sbd_receive_chars(struct sbd_port *sport)
 		uart_insert_char(uport, status, M_DUART_OVRUN_ERR, ch, flag);
 	}
 
-	tty_flip_buffer_push(uport->info->port.tty);
+	tty_flip_buffer_push(uport->state->port.tty);
 }
 
 static void sbd_transmit_chars(struct sbd_port *sport)
 {
 	struct uart_port *uport = &sport->port;
-	struct circ_buf *xmit = &sport->port.info->xmit;
+	struct circ_buf *xmit = &sport->port.state->xmit;
 	unsigned int mask;
 	int stop_tx;
 
@@ -440,7 +440,7 @@ static void sbd_status_handle(struct sbd_port *sport)
 
 	if (delta & ((M_DUART_IN_PIN2_VAL | M_DUART_IN_PIN0_VAL) <<
 		     S_DUART_IN_PIN_CHNG))
-		wake_up_interruptible(&uport->info->delta_msr_wait);
+		wake_up_interruptible(&uport->state->delta_msr_wait);
 }
 
 static irqreturn_t sbd_interrupt(int irq, void *dev_id)
drivers/serial/sc26xx.c +5 -5
index e0be11c..75038ad 100644
@@ -140,8 +140,8 @@ static struct tty_struct *receive_chars(struct uart_port *port)
 	char flag;
 	u8 status;
 
-	if (port->info != NULL)		/* Unopened serial console */
-		tty = port->info->port.tty;
+	if (port->state != NULL)		/* Unopened serial console */
+		tty = port->state->port.tty;
 
 	while (limit-- > 0) {
 		status = READ_SC_PORT(port, SR);
@@ -190,10 +190,10 @@ static void transmit_chars(struct uart_port *port)
 {
 	struct circ_buf *xmit;
 
-	if (!port->info)
+	if (!port->state)
 		return;
 
-	xmit = &port->info->xmit;
+	xmit = &port->state->xmit;
 	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
 		sc26xx_disable_irq(port, IMR_TXRDY);
 		return;
@@ -316,7 +316,7 @@ static void sc26xx_stop_tx(struct uart_port *port)
 /* port->lock held by caller.  */
 static void sc26xx_start_tx(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	while (!uart_circ_empty(xmit)) {
 		if (!(READ_SC_PORT(port, SR) & SR_TXRDY)) {
drivers/serial/serial_core.c +140 -146

828 lines not on this page · raw message

drivers/serial/serial_ks8695.c +3 -3
index 52db5cc..4560b2e 100644
@@ -154,7 +154,7 @@ static void ks8695uart_disable_ms(struct uart_port *port)
 static irqreturn_t ks8695uart_rx_chars(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	unsigned int status, ch, lsr, flg, max_count = 256;
 
 	status = UART_GET_LSR(port);		/* clears pending LSR interrupts */
@@ -210,7 +210,7 @@ ignore_char:
 static irqreturn_t ks8695uart_tx_chars(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 	unsigned int count;
 
 	if (port->x_char) {
@@ -266,7 +266,7 @@ static irqreturn_t ks8695uart_modem_status(int irq, void *dev_id)
 	if (status & URMS_URTERI)
 		port->icount.rng++;
 
-	wake_up_interruptible(&port->info->delta_msr_wait);
+	wake_up_interruptible(&port->state->delta_msr_wait);
 
 	return IRQ_HANDLED;
 }
drivers/serial/serial_lh7a40x.c +3 -3
index a7bf024..057fc5e 100644
@@ -138,7 +138,7 @@ static void lh7a40xuart_enable_ms (struct uart_port* port)
 
 static void lh7a40xuart_rx_chars (struct uart_port* port)
 {
-	struct tty_struct* tty = port->info->port.tty;
+	struct tty_struct* tty = port->state->port.tty;
 	int cbRxMax = 256;	/* (Gross) limit on receive */
 	unsigned int data;	/* Received data and status */
 	unsigned int flag;
@@ -184,7 +184,7 @@ static void lh7a40xuart_rx_chars (struct uart_port* port)
 
 static void lh7a40xuart_tx_chars (struct uart_port* port)
 {
-	struct circ_buf* xmit = &port->info->xmit;
+	struct circ_buf* xmit = &port->state->xmit;
 	int cbTxMax = port->fifosize;
 
 	if (port->x_char) {
@@ -241,7 +241,7 @@ static void lh7a40xuart_modem_status (struct uart_port* port)
 	if (delta & CTS)
 		uart_handle_cts_change (port, status & CTS);
 
-	wake_up_interruptible (&port->info->delta_msr_wait);
+	wake_up_interruptible (&port->state->delta_msr_wait);
 }
 
 static irqreturn_t lh7a40xuart_int (int irq, void* dev_id)
drivers/serial/serial_txx9.c +2 -2
index 54dd16d..0f7cf4c 100644
@@ -272,7 +272,7 @@ static void serial_txx9_initialize(struct uart_port *port)
 static inline void
 receive_chars(struct uart_txx9_port *up, unsigned int *status)
 {
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned char ch;
 	unsigned int disr = *status;
 	int max_count = 256;
@@ -348,7 +348,7 @@ receive_chars(struct uart_txx9_port *up, unsigned int *status)
 
 static inline void transmit_chars(struct uart_txx9_port *up)
 {
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 	int count;
 
 	if (up->port.x_char) {
drivers/serial/sh-sci.c +5 -5
index 32dc2fc..85119fb 100644
@@ -361,7 +361,7 @@ static inline int sci_rxroom(struct uart_port *port)
 
 static void sci_transmit_chars(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 	unsigned int stopped = uart_tx_stopped(port);
 	unsigned short status;
 	unsigned short ctrl;
@@ -426,7 +426,7 @@ static void sci_transmit_chars(struct uart_port *port)
 static inline void sci_receive_chars(struct uart_port *port)
 {
 	struct sci_port *sci_port = to_sci_port(port);
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	int i, count, copied = 0;
 	unsigned short status;
 	unsigned char flag;
@@ -546,7 +546,7 @@ static inline int sci_handle_errors(struct uart_port *port)
 {
 	int copied = 0;
 	unsigned short status = sci_in(port, SCxSR);
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 
 	if (status & SCxSR_ORER(port)) {
 		/* overrun error */
@@ -600,7 +600,7 @@ static inline int sci_handle_errors(struct uart_port *port)
 
 static inline int sci_handle_fifo_overrun(struct uart_port *port)
 {
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	int copied = 0;
 
 	if (port->type != PORT_SCIF)
@@ -623,7 +623,7 @@ static inline int sci_handle_breaks(struct uart_port *port)
 {
 	int copied = 0;
 	unsigned short status = sci_in(port, SCxSR);
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	struct sci_port *s = to_sci_port(port);
 
 	if (uart_handle_break(port))
drivers/serial/sn_console.c +11 -11
index d5276c0..9794e0c 100644
@@ -469,9 +469,9 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags)
 		return;
 	}
 
-	if (port->sc_port.info) {
+	if (port->sc_port.state) {
 		/* The serial_core stuffs are initilized, use them */
-		tty = port->sc_port.info->port.tty;
+		tty = port->sc_port.state->port.tty;
 	}
 	else {
 		/* Not registered yet - can't pass to tty layer.  */
@@ -550,9 +550,9 @@ static void sn_transmit_chars(struct sn_cons_port *port, int raw)
 
 	BUG_ON(!port->sc_is_asynch);
 
-	if (port->sc_port.info) {
+	if (port->sc_port.state) {
 		/* We're initilized, using serial core infrastructure */
-		xmit = &port->sc_port.info->xmit;
+		xmit = &port->sc_port.state->xmit;
 	} else {
 		/* Probably sn_sal_switch_to_asynch has been run but serial core isn't
 		 * initilized yet.  Just return.  Writes are going through
@@ -927,7 +927,7 @@ sn_sal_console_write(struct console *co, const char *s, unsigned count)
 	/* We can't look at the xmit buffer if we're not registered with serial core
 	 *  yet.  So only do the fancy recovery after registering
 	 */
-	if (!port->sc_port.info) {
+	if (!port->sc_port.state) {
 		/* Not yet registered with serial core - simple case */
 		puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count);
 		return;
@@ -936,8 +936,8 @@ sn_sal_console_write(struct console *co, const char *s, unsigned count)
 	/* somebody really wants this output, might be an
 	 * oops, kdb, panic, etc.  make sure they get it. */
 	if (spin_is_locked(&port->sc_port.lock)) {
-		int lhead = port->sc_port.info->xmit.head;
-		int ltail = port->sc_port.info->xmit.tail;
+		int lhead = port->sc_port.state->xmit.head;
+		int ltail = port->sc_port.state->xmit.tail;
 		int counter, got_lock = 0;
 
 		/*
@@ -962,13 +962,13 @@ sn_sal_console_write(struct console *co, const char *s, unsigned count)
 				break;
 			} else {
 				/* still locked */
-				if ((lhead != port->sc_port.info->xmit.head)
+				if ((lhead != port->sc_port.state->xmit.head)
 				    || (ltail !=
-					port->sc_port.info->xmit.tail)) {
+					port->sc_port.state->xmit.tail)) {
 					lhead =
-						port->sc_port.info->xmit.head;
+						port->sc_port.state->xmit.head;
 					ltail =
-						port->sc_port.info->xmit.tail;
+						port->sc_port.state->xmit.tail;
 					counter = 0;
 				}
 			}
drivers/serial/sunhv.c +4 -4
index 1df5325..d548652 100644
@@ -184,8 +184,8 @@ static struct tty_struct *receive_chars(struct uart_port *port)
 {
 	struct tty_struct *tty = NULL;
 
-	if (port->info != NULL)		/* Unopened serial console */
-		tty = port->info->port.tty;
+	if (port->state != NULL)		/* Unopened serial console */
+		tty = port->state->port.tty;
 
 	if (sunhv_ops->receive_chars(port, tty))
 		sun_do_break();
@@ -197,10 +197,10 @@ static void transmit_chars(struct uart_port *port)
 {
 	struct circ_buf *xmit;
 
-	if (!port->info)
+	if (!port->state)
 		return;
 
-	xmit = &port->info->xmit;
+	xmit = &port->state->xmit;
 	if (uart_circ_empty(xmit) || uart_tx_stopped(port))
 		return;
 
drivers/serial/sunsab.c +5 -5
index 0355efe..7c4f2fe 100644
@@ -117,8 +117,8 @@ receive_chars(struct uart_sunsab_port *up,
 	int count = 0;
 	int i;
 
-	if (up->port.info != NULL)		/* Unopened serial console */
-		tty = up->port.info->port.tty;
+	if (up->port.state != NULL)		/* Unopened serial console */
+		tty = up->port.state->port.tty;
 
 	/* Read number of BYTES (Character + Status) available. */
 	if (stat->sreg.isr0 & SAB82532_ISR0_RPF) {
@@ -229,7 +229,7 @@ static void sunsab_tx_idle(struct uart_sunsab_port *);
 static void transmit_chars(struct uart_sunsab_port *up,
 			   union sab82532_irq_status *stat)
 {
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 	int i;
 
 	if (stat->sreg.isr1 & SAB82532_ISR1_ALLS) {
@@ -297,7 +297,7 @@ static void check_status(struct uart_sunsab_port *up,
 		up->port.icount.dsr++;
 	}
 
-	wake_up_interruptible(&up->port.info->delta_msr_wait);
+	wake_up_interruptible(&up->port.state->delta_msr_wait);
 }
 
 static irqreturn_t sunsab_interrupt(int irq, void *dev_id)
@@ -429,7 +429,7 @@ static void sunsab_tx_idle(struct uart_sunsab_port *up)
 static void sunsab_start_tx(struct uart_port *port)
 {
 	struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 	int i;
 
 	up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
drivers/serial/sunsu.c +3 -3
index 47c6837..5a32365 100644
@@ -311,7 +311,7 @@ static void sunsu_enable_ms(struct uart_port *port)
 static struct tty_struct *
 receive_chars(struct uart_sunsu_port *up, unsigned char *status)
 {
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned char ch, flag;
 	int max_count = 256;
 	int saw_console_brk = 0;
@@ -389,7 +389,7 @@ receive_chars(struct uart_sunsu_port *up, unsigned char *status)
 
 static void transmit_chars(struct uart_sunsu_port *up)
 {
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 	int count;
 
 	if (up->port.x_char) {
@@ -441,7 +441,7 @@ static void check_modem_status(struct uart_sunsu_port *up)
 	if (status & UART_MSR_DCTS)
 		uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
 
-	wake_up_interruptible(&up->port.info->delta_msr_wait);
+	wake_up_interruptible(&up->port.state->delta_msr_wait);
 }
 
 static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id)
drivers/serial/sunzilog.c +7 -7
index e09d3ce..055034d 100644
@@ -328,9 +328,9 @@ sunzilog_receive_chars(struct uart_sunzilog_port *up,
 	unsigned char ch, r1, flag;
 
 	tty = NULL;
-	if (up->port.info != NULL &&		/* Unopened serial console */
-	    up->port.info->port.tty != NULL)	/* Keyboard || mouse */
-		tty = up->port.info->port.tty;
+	if (up->port.state != NULL &&		/* Unopened serial console */
+	    up->port.state->port.tty != NULL)	/* Keyboard || mouse */
+		tty = up->port.state->port.tty;
 
 	for (;;) {
 
@@ -451,7 +451,7 @@ static void sunzilog_status_handle(struct uart_sunzilog_port *up,
 			uart_handle_cts_change(&up->port,
 					       (status & CTS));
 
-		wake_up_interruptible(&up->port.info->delta_msr_wait);
+		wake_up_interruptible(&up->port.state->delta_msr_wait);
 	}
 
 	up->prev_status = status;
@@ -501,9 +501,9 @@ static void sunzilog_transmit_chars(struct uart_sunzilog_port *up,
 		return;
 	}
 
-	if (up->port.info == NULL)
+	if (up->port.state == NULL)
 		goto ack_tx_int;
-	xmit = &up->port.info->xmit;
+	xmit = &up->port.state->xmit;
 	if (uart_circ_empty(xmit))
 		goto ack_tx_int;
 
@@ -705,7 +705,7 @@ static void sunzilog_start_tx(struct uart_port *port)
 		port->icount.tx++;
 		port->x_char = 0;
 	} else {
-		struct circ_buf *xmit = &port->info->xmit;
+		struct circ_buf *xmit = &port->state->xmit;
 
 		writeb(xmit->buf[xmit->tail], &channel->data);
 		ZSDELAY();
drivers/serial/timbuart.c +5 -5
index 063a313..3d40be6 100644
@@ -77,7 +77,7 @@ static void timbuart_flush_buffer(struct uart_port *port)
 
 static void timbuart_rx_chars(struct uart_port *port)
 {
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 
 	while (ioread32(port->membase + TIMBUART_ISR) & RXDP) {
 		u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
@@ -86,7 +86,7 @@ static void timbuart_rx_chars(struct uart_port *port)
 	}
 
 	spin_unlock(&port->lock);
-	tty_flip_buffer_push(port->info->port.tty);
+	tty_flip_buffer_push(port->state->port.tty);
 	spin_lock(&port->lock);
 
 	dev_dbg(port->dev, "%s - total read %d bytes\n",
@@ -95,7 +95,7 @@ static void timbuart_rx_chars(struct uart_port *port)
 
 static void timbuart_tx_chars(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	while (!(ioread32(port->membase + TIMBUART_ISR) & TXBF) &&
 		!uart_circ_empty(xmit)) {
@@ -118,7 +118,7 @@ static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier)
 {
 	struct timbuart_port *uart =
 		container_of(port, struct timbuart_port, port);
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	if (uart_circ_empty(xmit) || uart_tx_stopped(port))
 		return;
@@ -231,7 +231,7 @@ static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier)
 		iowrite32(CTS_DELTA, port->membase + TIMBUART_ISR);
 		cts = timbuart_get_mctrl(port);
 		uart_handle_cts_change(port, cts & TIOCM_CTS);
-		wake_up_interruptible(&port->info->delta_msr_wait);
+		wake_up_interruptible(&port->state->delta_msr_wait);
 	}
 
 	*ier |= CTS_DELTA;
drivers/serial/uartlite.c +3 -3
index 3317148..5d3a573 100644
@@ -75,7 +75,7 @@ static struct uart_port ulite_ports[ULITE_NR_UARTS];
 
 static int ulite_receive(struct uart_port *port, int stat)
 {
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	unsigned char ch = 0;
 	char flag = TTY_NORMAL;
 
@@ -125,7 +125,7 @@ static int ulite_receive(struct uart_port *port, int stat)
 
 static int ulite_transmit(struct uart_port *port, int stat)
 {
-	struct circ_buf *xmit  = &port->info->xmit;
+	struct circ_buf *xmit  = &port->state->xmit;
 
 	if (stat & ULITE_STATUS_TXFULL)
 		return 0;
@@ -162,7 +162,7 @@ static irqreturn_t ulite_isr(int irq, void *dev_id)
 		busy |= ulite_transmit(port, stat);
 	} while (busy);
 
-	tty_flip_buffer_push(port->info->port.tty);
+	tty_flip_buffer_push(port->state->port.tty);
 
 	return IRQ_HANDLED;
 }
drivers/serial/ucc_uart.c +2 -2
index e945e78..0c08f28 100644
@@ -327,7 +327,7 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
 	unsigned char *p;
 	unsigned int count;
 	struct uart_port *port = &qe_port->port;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	bdp = qe_port->rx_cur;
 
@@ -466,7 +466,7 @@ static void qe_uart_int_rx(struct uart_qe_port *qe_port)
 	int i;
 	unsigned char ch, *cp;
 	struct uart_port *port = &qe_port->port;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	struct qe_bd *bdp;
 	u16 status;
 	unsigned int flg;
drivers/serial/vr41xx_siu.c +3 -3
index dac550e..cf4410e 100644
@@ -318,7 +318,7 @@ static inline void receive_chars(struct uart_port *port, uint8_t *status)
 	char flag;
 	int max_count = RX_MAX_COUNT;
 
-	tty = port->info->port.tty;
+	tty = port->state->port.tty;
 	lsr = *status;
 
 	do {
@@ -386,7 +386,7 @@ static inline void check_modem_status(struct uart_port *port)
 	if (msr & UART_MSR_DCTS)
 		uart_handle_cts_change(port, msr & UART_MSR_CTS);
 
-	wake_up_interruptible(&port->info->delta_msr_wait);
+	wake_up_interruptible(&port->state->delta_msr_wait);
 }
 
 static inline void transmit_chars(struct uart_port *port)
@@ -394,7 +394,7 @@ static inline void transmit_chars(struct uart_port *port)
 	struct circ_buf *xmit;
 	int max_count = TX_MAX_COUNT;
 
-	xmit = &port->info->xmit;
+	xmit = &port->state->xmit;
 
 	if (port->x_char) {
 		siu_write(port, UART_TX, port->x_char);
drivers/serial/zs.c +3 -3
index d8c2809..b9c9fb9 100644
@@ -602,12 +602,12 @@ static void zs_receive_chars(struct zs_port *zport)
 		uart_insert_char(uport, status, Rx_OVR, ch, flag);
 	}
 
-	tty_flip_buffer_push(uport->info->port.tty);
+	tty_flip_buffer_push(uport->state->port.tty);
 }
 
 static void zs_raw_transmit_chars(struct zs_port *zport)
 {
-	struct circ_buf *xmit = &zport->port.info->xmit;
+	struct circ_buf *xmit = &zport->port.state->xmit;
 
 	/* XON/XOFF chars.  */
 	if (zport->port.x_char) {
@@ -686,7 +686,7 @@ static void zs_status_handle(struct zs_port *zport, struct zs_port *zport_a)
 			uport->icount.rng++;
 
 		if (delta)
-			wake_up_interruptible(&uport->info->delta_msr_wait);
+			wake_up_interruptible(&uport->state->delta_msr_wait);
 
 		spin_lock(&scc->zlock);
 	}
include/linux/serial_core.h +30 -34

141 lines not on this page · raw message

Signature · 1 line
1.6.4.2
#49 lore raw

PATCH 47/79 serial: Fold closing_* fields into the tty_port ones

In reply to Greg KH

From: Alan Cox <[email protected]>

Remove some more serial specific use

---
 drivers/serial/serial_core.c |   26 +++++++++++++-------------
 include/linux/serial_core.h  |    2 --
 include/linux/tty.h          |    4 ++--
 3 files changed, 15 insertions(+), 17 deletions(-)
drivers/serial/serial_core.c +13 -13
index ea53b6f..2d63b13 100644
@@ -651,10 +651,10 @@ static int uart_get_info(struct uart_state *state,
 	tmp.flags	    = port->flags;
 	tmp.xmit_fifo_size  = port->fifosize;
 	tmp.baud_base	    = port->uartclk / 16;
-	tmp.close_delay	    = state->close_delay / 10;
-	tmp.closing_wait    = state->closing_wait == USF_CLOSING_WAIT_NONE ?
+	tmp.close_delay	    = state->port.close_delay / 10;
+	tmp.closing_wait    = state->port.closing_wait == USF_CLOSING_WAIT_NONE ?
 				ASYNC_CLOSING_WAIT_NONE :
-				state->closing_wait / 10;
+				state->port.closing_wait / 10;
 	tmp.custom_divisor  = port->custom_divisor;
 	tmp.hub6	    = port->hub6;
 	tmp.io_type         = port->iotype;
@@ -724,8 +724,8 @@ static int uart_set_info(struct uart_state *state,
 		retval = -EPERM;
 		if (change_irq || change_port ||
 		    (new_serial.baud_base != port->uartclk / 16) ||
-		    (close_delay != state->close_delay) ||
-		    (closing_wait != state->closing_wait) ||
+		    (close_delay != state->port.close_delay) ||
+		    (closing_wait != state->port.closing_wait) ||
 		    (new_serial.xmit_fifo_size &&
 		     new_serial.xmit_fifo_size != port->fifosize) ||
 		    (((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0))
@@ -834,8 +834,8 @@ static int uart_set_info(struct uart_state *state,
 	port->flags            = (port->flags & ~UPF_CHANGE_MASK) |
 				 (new_flags & UPF_CHANGE_MASK);
 	port->custom_divisor   = new_serial.custom_divisor;
-	state->close_delay     = close_delay;
-	state->closing_wait    = closing_wait;
+	state->port.close_delay     = close_delay;
+	state->port.closing_wait    = closing_wait;
 	if (new_serial.xmit_fifo_size)
 		port->fifosize = new_serial.xmit_fifo_size;
 	if (state->port.tty)
@@ -1297,8 +1297,8 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 	 */
 	tty->closing = 1;
 
-	if (state->closing_wait != USF_CLOSING_WAIT_NONE)
-		tty_wait_until_sent(tty, msecs_to_jiffies(state->closing_wait));
+	if (state->port.closing_wait != USF_CLOSING_WAIT_NONE)
+		tty_wait_until_sent(tty, msecs_to_jiffies(state->port.closing_wait));
 
 	/*
 	 * At this point, we stop accepting input.  To do this, we
@@ -1326,8 +1326,8 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 	state->port.tty = NULL;
 
 	if (state->port.blocked_open) {
-		if (state->close_delay)
-			msleep_interruptible(state->close_delay);
+		if (state->port.close_delay)
+			msleep_interruptible(state->port.close_delay);
 	} else if (!uart_console(port)) {
 		uart_change_pm(state, 3);
 	}
@@ -2358,11 +2358,11 @@ int uart_register_driver(struct uart_driver *drv)
 	for (i = 0; i < drv->nr; i++) {
 		struct uart_state *state = drv->state + i;
 
-		state->close_delay     = 500;	/* .5 seconds */
-		state->closing_wait    = 30000;	/* 30 seconds */
 		mutex_init(&state->mutex);
 
 		tty_port_init(&state->port);
+		state->port.close_delay     = 500;	/* .5 seconds */
+		state->port.closing_wait    = 30000;	/* 30 seconds */
 		init_waitqueue_head(&state->delta_msr_wait);
 		tasklet_init(&state->tlet, uart_tasklet_action,
 			     (unsigned long)state);
include/linux/serial_core.h +0 -2
index c154270..fd11d4d 100644
@@ -350,8 +350,6 @@ typedef unsigned int __bitwise__ uif_t;
  */
 struct uart_state {
 	struct tty_port		port;
-	unsigned int		close_delay;		/* msec */
-	unsigned int		closing_wait;		/* msec */
 
 #define USF_CLOSING_WAIT_INF	(0)
 #define USF_CLOSING_WAIT_NONE	(~0U)
include/linux/tty.h +2 -2
index ecb3d1b..9fdc3d8 100644
@@ -206,8 +206,8 @@ struct tty_port {
 	unsigned long		flags;		/* TTY flags ASY_*/
 	struct mutex		mutex;		/* Locking */
 	unsigned char		*xmit_buf;	/* Optional buffer */
-	int			close_delay;	/* Close port delay */
-	int			closing_wait;	/* Delay for output */
+	unsigned int		close_delay;	/* Close port delay */
+	unsigned int		closing_wait;	/* Delay for output */
 	int			drain_delay;	/* Set to zero if no pure time
 						   based drain is needed else
 						   set to size of fifo */
Signature · 1 line
1.6.4.2
#50 lore raw

PATCH 48/79 serial: use tty_port pointers in the core code

In reply to Greg KH

From: Alan Cox <[email protected]>

Extract out a lot of the x.port. uses and also show up where there are things left to be isolated that prevent use using the port helpers in the serial layer at this point

---
 drivers/serial/serial_core.c |  288 +++++++++++++++++++++---------------------
 1 files changed, 146 insertions(+), 142 deletions(-)
drivers/serial/serial_core.c +146 -142
index 2d63b13..0ffefb3 100644
@@ -141,7 +141,8 @@ uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear)
  */
 static int uart_startup(struct uart_state *state, int init_hw)
 {
-	struct uart_port *port = state->uart_port;
+	struct uart_port *uport = state->uart_port;
+	struct tty_port *port = &state->port;
 	unsigned long page;
 	int retval = 0;
 
@@ -153,9 +154,9 @@ static int uart_startup(struct uart_state *state, int init_hw)
 	 * once we have successfully opened the port.  Also set
 	 * up the tty->alt_speed kludge
 	 */
-	set_bit(TTY_IO_ERROR, &state->port.tty->flags);
+	set_bit(TTY_IO_ERROR, &port->tty->flags);
 
-	if (port->type == PORT_UNKNOWN)
+	if (uport->type == PORT_UNKNOWN)
 		return 0;
 
 	/*
@@ -172,7 +173,7 @@ static int uart_startup(struct uart_state *state, int init_hw)
 		uart_circ_clear(&state->xmit);
 	}
 
-	retval = port->ops->startup(port);
+	retval = uport->ops->startup(uport);
 	if (retval == 0) {
 		if (init_hw) {
 			/*
@@ -184,20 +185,20 @@ static int uart_startup(struct uart_state *state, int init_hw)
 			 * Setup the RTS and DTR signals once the
 			 * port is open and ready to respond.
 			 */
-			if (state->port.tty->termios->c_cflag & CBAUD)
-				uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR);
+			if (port->tty->termios->c_cflag & CBAUD)
+				uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
 		}
 
 		if (state->flags & UIF_CTS_FLOW) {
-			spin_lock_irq(&port->lock);
-			if (!(port->ops->get_mctrl(port) & TIOCM_CTS))
-				state->port.tty->hw_stopped = 1;
-			spin_unlock_irq(&port->lock);
+			spin_lock_irq(&uport->lock);
+			if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS))
+				port->tty->hw_stopped = 1;
+			spin_unlock_irq(&uport->lock);
 		}
 
 		state->flags |= UIF_INITIALIZED;
 
-		clear_bit(TTY_IO_ERROR, &state->port.tty->flags);
+		clear_bit(TTY_IO_ERROR, &port->tty->flags);
 	}
 
 	if (retval && capable(CAP_SYS_ADMIN))
@@ -672,7 +673,8 @@ static int uart_set_info(struct uart_state *state,
 			 struct serial_struct __user *newinfo)
 {
 	struct serial_struct new_serial;
-	struct uart_port *port = state->uart_port;
+	struct uart_port *uport = state->uart_port;
+	struct tty_port *port = &state->port;
 	unsigned long new_port;
 	unsigned int change_irq, change_port, closing_wait;
 	unsigned int old_custom_divisor, close_delay;
@@ -700,47 +702,47 @@ static int uart_set_info(struct uart_state *state,
 	 */
 	mutex_lock(&state->mutex);
 
-	change_irq  = !(port->flags & UPF_FIXED_PORT)
-		&& new_serial.irq != port->irq;
+	change_irq  = !(uport->flags & UPF_FIXED_PORT)
+		&& new_serial.irq != uport->irq;
 
 	/*
 	 * Since changing the 'type' of the port changes its resource
 	 * allocations, we should treat type changes the same as
 	 * IO port changes.
 	 */
-	change_port = !(port->flags & UPF_FIXED_PORT)
-		&& (new_port != port->iobase ||
-		    (unsigned long)new_serial.iomem_base != port->mapbase ||
-		    new_serial.hub6 != port->hub6 ||
-		    new_serial.io_type != port->iotype ||
-		    new_serial.iomem_reg_shift != port->regshift ||
-		    new_serial.type != port->type);
-
-	old_flags = port->flags;
+	change_port = !(uport->flags & UPF_FIXED_PORT)
+		&& (new_port != uport->iobase ||
+		    (unsigned long)new_serial.iomem_base != uport->mapbase ||
+		    new_serial.hub6 != uport->hub6 ||
+		    new_serial.io_type != uport->iotype ||
+		    new_serial.iomem_reg_shift != uport->regshift ||
+		    new_serial.type != uport->type);
+
+	old_flags = uport->flags;
 	new_flags = new_serial.flags;
-	old_custom_divisor = port->custom_divisor;
+	old_custom_divisor = uport->custom_divisor;
 
 	if (!capable(CAP_SYS_ADMIN)) {
 		retval = -EPERM;
 		if (change_irq || change_port ||
-		    (new_serial.baud_base != port->uartclk / 16) ||
-		    (close_delay != state->port.close_delay) ||
-		    (closing_wait != state->port.closing_wait) ||
+		    (new_serial.baud_base != uport->uartclk / 16) ||
+		    (close_delay != port->close_delay) ||
+		    (closing_wait != port->closing_wait) ||
 		    (new_serial.xmit_fifo_size &&
-		     new_serial.xmit_fifo_size != port->fifosize) ||
+		     new_serial.xmit_fifo_size != uport->fifosize) ||
 		    (((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0))
 			goto exit;
-		port->flags = ((port->flags & ~UPF_USR_MASK) |
+		uport->flags = ((uport->flags & ~UPF_USR_MASK) |
 			       (new_flags & UPF_USR_MASK));
-		port->custom_divisor = new_serial.custom_divisor;
+		uport->custom_divisor = new_serial.custom_divisor;
 		goto check_and_exit;
 	}
 
 	/*
 	 * Ask the low level driver to verify the settings.
 	 */
-	if (port->ops->verify_port)
-		retval = port->ops->verify_port(port, &new_serial);
+	if (uport->ops->verify_port)
+		retval = uport->ops->verify_port(uport, &new_serial);
 
 	if ((new_serial.irq >= nr_irqs) || (new_serial.irq < 0) ||
 	    (new_serial.baud_base < 9600))
@@ -769,31 +771,31 @@ static int uart_set_info(struct uart_state *state,
 		unsigned long old_iobase, old_mapbase;
 		unsigned int old_type, old_iotype, old_hub6, old_shift;
 
-		old_iobase = port->iobase;
-		old_mapbase = port->mapbase;
-		old_type = port->type;
-		old_hub6 = port->hub6;
-		old_iotype = port->iotype;
-		old_shift = port->regshift;
+		old_iobase = uport->iobase;
+		old_mapbase = uport->mapbase;
+		old_type = uport->type;
+		old_hub6 = uport->hub6;
+		old_iotype = uport->iotype;
+		old_shift = uport->regshift;
 
 		/*
 		 * Free and release old regions
 		 */
 		if (old_type != PORT_UNKNOWN)
-			port->ops->release_port(port);
+			uport->ops->release_port(uport);
 
-		port->iobase = new_port;
-		port->type = new_serial.type;
-		port->hub6 = new_serial.hub6;
-		port->iotype = new_serial.io_type;
-		port->regshift = new_serial.iomem_reg_shift;
-		port->mapbase = (unsigned long)new_serial.iomem_base;
+		uport->iobase = new_port;
+		uport->type = new_serial.type;
+		uport->hub6 = new_serial.hub6;
+		uport->iotype = new_serial.io_type;
+		uport->regshift = new_serial.iomem_reg_shift;
+		uport->mapbase = (unsigned long)new_serial.iomem_base;
 
 		/*
 		 * Claim and map the new regions
 		 */
-		if (port->type != PORT_UNKNOWN) {
-			retval = port->ops->request_port(port);
+		if (uport->type != PORT_UNKNOWN) {
+			retval = uport->ops->request_port(uport);
 		} else {
 			/* Always success - Jean II */
 			retval = 0;
@@ -804,19 +806,19 @@ static int uart_set_info(struct uart_state *state,
 		 * new port, try to restore the old settings.
 		 */
 		if (retval && old_type != PORT_UNKNOWN) {
-			port->iobase = old_iobase;
-			port->type = old_type;
-			port->hub6 = old_hub6;
-			port->iotype = old_iotype;
-			port->regshift = old_shift;
-			port->mapbase = old_mapbase;
-			retval = port->ops->request_port(port);
+			uport->iobase = old_iobase;
+			uport->type = old_type;
+			uport->hub6 = old_hub6;
+			uport->iotype = old_iotype;
+			uport->regshift = old_shift;
+			uport->mapbase = old_mapbase;
+			retval = uport->ops->request_port(uport);
 			/*
 			 * If we failed to restore the old settings,
 			 * we fail like this.
 			 */
 			if (retval)
-				port->type = PORT_UNKNOWN;
+				uport->type = PORT_UNKNOWN;
 
 			/*
 			 * We failed anyway.
@@ -828,38 +830,38 @@ static int uart_set_info(struct uart_state *state,
 	}
 
 	if (change_irq)
-		port->irq      = new_serial.irq;
-	if (!(port->flags & UPF_FIXED_PORT))
-		port->uartclk  = new_serial.baud_base * 16;
-	port->flags            = (port->flags & ~UPF_CHANGE_MASK) |
+		uport->irq      = new_serial.irq;
+	if (!(uport->flags & UPF_FIXED_PORT))
+		uport->uartclk  = new_serial.baud_base * 16;
+	uport->flags            = (uport->flags & ~UPF_CHANGE_MASK) |
 				 (new_flags & UPF_CHANGE_MASK);
-	port->custom_divisor   = new_serial.custom_divisor;
-	state->port.close_delay     = close_delay;
-	state->port.closing_wait    = closing_wait;
+	uport->custom_divisor   = new_serial.custom_divisor;
+	port->close_delay     = close_delay;
+	port->closing_wait    = closing_wait;
 	if (new_serial.xmit_fifo_size)
-		port->fifosize = new_serial.xmit_fifo_size;
-	if (state->port.tty)
-		state->port.tty->low_latency =
-			(port->flags & UPF_LOW_LATENCY) ? 1 : 0;
+		uport->fifosize = new_serial.xmit_fifo_size;
+	if (port->tty)
+		port->tty->low_latency =
+			(uport->flags & UPF_LOW_LATENCY) ? 1 : 0;
 
  check_and_exit:
 	retval = 0;
-	if (port->type == PORT_UNKNOWN)
+	if (uport->type == PORT_UNKNOWN)
 		goto exit;
 	if (state->flags & UIF_INITIALIZED) {
-		if (((old_flags ^ port->flags) & UPF_SPD_MASK) ||
-		    old_custom_divisor != port->custom_divisor) {
+		if (((old_flags ^ uport->flags) & UPF_SPD_MASK) ||
+		    old_custom_divisor != uport->custom_divisor) {
 			/*
 			 * If they're setting up a custom divisor or speed,
 			 * instead of clearing it, then bitch about it. No
 			 * need to rate-limit; it's CAP_SYS_ADMIN only.
 			 */
-			if (port->flags & UPF_SPD_MASK) {
+			if (uport->flags & UPF_SPD_MASK) {
 				char buf[64];
 				printk(KERN_NOTICE
 				       "%s sets custom speed on %s. This "
 				       "is deprecated.\n", current->comm,
-				       tty_name(state->port.tty, buf));
+				       tty_name(port->tty, buf));
 			}
 			uart_change_speed(state, NULL);
 		}
@@ -878,10 +880,11 @@ static int uart_set_info(struct uart_state *state,
 static int uart_get_lsr_info(struct uart_state *state,
 			     unsigned int __user *value)
 {
-	struct uart_port *port = state->uart_port;
+	struct uart_port *uport = state->uart_port;
+	struct tty_port *port = &state->port;
 	unsigned int result;
 
-	result = port->ops->tx_empty(port);
+	result = uport->ops->tx_empty(uport);
 
 	/*
 	 * If we're about to load something into the transmit
@@ -889,9 +892,9 @@ static int uart_get_lsr_info(struct uart_state *state,
 	 * avoid a race condition (depending on when the transmit
 	 * interrupt happens).
 	 */
-	if (port->x_char ||
+	if (uport->x_char ||
 	    ((uart_circ_chars_pending(&state->xmit) > 0) &&
-	     !state->port.tty->stopped && !state->port.tty->hw_stopped))
+	     !port->tty->stopped && !port->tty->hw_stopped))
 		result &= ~TIOCSER_TEMT;
 
 	return put_user(result, value);
@@ -900,17 +903,17 @@ static int uart_get_lsr_info(struct uart_state *state,
 static int uart_tiocmget(struct tty_struct *tty, struct file *file)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->uart_port;
+	struct uart_port *uport = state->uart_port;
 	int result = -EIO;
 
 	mutex_lock(&state->mutex);
 	if ((!file || !tty_hung_up_p(file)) &&
 	    !(tty->flags & (1 << TTY_IO_ERROR))) {
-		result = port->mctrl;
+		result = uport->mctrl;
 
-		spin_lock_irq(&port->lock);
-		result |= port->ops->get_mctrl(port);
-		spin_unlock_irq(&port->lock);
+		spin_lock_irq(&uport->lock);
+		result |= uport->ops->get_mctrl(uport);
+		spin_unlock_irq(&uport->lock);
 	}
 	mutex_unlock(&state->mutex);
 
@@ -922,13 +925,13 @@ uart_tiocmset(struct tty_struct *tty, struct file *file,
 	      unsigned int set, unsigned int clear)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->uart_port;
+	struct uart_port *uport = state->uart_port;
 	int ret = -EIO;
 
 	mutex_lock(&state->mutex);
 	if ((!file || !tty_hung_up_p(file)) &&
 	    !(tty->flags & (1 << TTY_IO_ERROR))) {
-		uart_update_mctrl(port, set, clear);
+		uart_update_mctrl(uport, set, clear);
 		ret = 0;
 	}
 	mutex_unlock(&state->mutex);
@@ -938,12 +941,12 @@ uart_tiocmset(struct tty_struct *tty, struct file *file,
 static int uart_break_ctl(struct tty_struct *tty, int break_state)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->uart_port;
+	struct uart_port *uport = state->uart_port;
 
 	mutex_lock(&state->mutex);
 
-	if (port->type != PORT_UNKNOWN)
-		port->ops->break_ctl(port, break_state);
+	if (uport->type != PORT_UNKNOWN)
+		uport->ops->break_ctl(uport, break_state);
 
 	mutex_unlock(&state->mutex);
 	return 0;
@@ -951,7 +954,7 @@ static int uart_break_ctl(struct tty_struct *tty, int break_state)
 
 static int uart_do_autoconfig(struct uart_state *state)
 {
-	struct uart_port *port = state->uart_port;
+	struct uart_port *uport = state->uart_port;
 	int flags, ret;
 
 	if (!capable(CAP_SYS_ADMIN))
@@ -973,18 +976,18 @@ static int uart_do_autoconfig(struct uart_state *state)
 		 * If we already have a port type configured,
 		 * we must release its resources.
 		 */
-		if (port->type != PORT_UNKNOWN)
-			port->ops->release_port(port);
+		if (uport->type != PORT_UNKNOWN)
+			uport->ops->release_port(uport);
 
 		flags = UART_CONFIG_TYPE;
-		if (port->flags & UPF_AUTO_IRQ)
+		if (uport->flags & UPF_AUTO_IRQ)
 			flags |= UART_CONFIG_IRQ;
 
 		/*
 		 * This will claim the ports resources if
 		 * a port is found.
 		 */
-		port->ops->config_port(port, flags);
+		uport->ops->config_port(uport, flags);
 
 		ret = uart_startup(state, 1);
 	}
@@ -1001,7 +1004,7 @@ static int uart_do_autoconfig(struct uart_state *state)
 static int
 uart_wait_modem_status(struct uart_state *state, unsigned long arg)
 {
-	struct uart_port *port = state->uart_port;
+	struct uart_port *uport = state->uart_port;
 	DECLARE_WAITQUEUE(wait, current);
 	struct uart_icount cprev, cnow;
 	int ret;
@@ -1009,20 +1012,20 @@ uart_wait_modem_status(struct uart_state *state, unsigned long arg)
 	/*
 	 * note the counters on entry
 	 */
-	spin_lock_irq(&port->lock);
-	memcpy(&cprev, &port->icount, sizeof(struct uart_icount));
+	spin_lock_irq(&uport->lock);
+	memcpy(&cprev, &uport->icount, sizeof(struct uart_icount));
 
 	/*
 	 * Force modem status interrupts on
 	 */
-	port->ops->enable_ms(port);
-	spin_unlock_irq(&port->lock);
+	uport->ops->enable_ms(uport);
+	spin_unlock_irq(&uport->lock);
 
 	add_wait_queue(&state->delta_msr_wait, &wait);
 	for (;;) {
-		spin_lock_irq(&port->lock);
-		memcpy(&cnow, &port->icount, sizeof(struct uart_icount));
-		spin_unlock_irq(&port->lock);
+		spin_lock_irq(&uport->lock);
+		memcpy(&cnow, &uport->icount, sizeof(struct uart_icount));
+		spin_unlock_irq(&uport->lock);
 
 		set_current_state(TASK_INTERRUPTIBLE);
 
@@ -1062,11 +1065,11 @@ static int uart_get_count(struct uart_state *state,
 {
 	struct serial_icounter_struct icount;
 	struct uart_icount cnow;
-	struct uart_port *port = state->uart_port;
+	struct uart_port *uport = state->uart_port;
 
-	spin_lock_irq(&port->lock);
-	memcpy(&cnow, &port->icount, sizeof(struct uart_icount));
-	spin_unlock_irq(&port->lock);
+	spin_lock_irq(&uport->lock);
+	memcpy(&cnow, &uport->icount, sizeof(struct uart_icount));
+	spin_unlock_irq(&uport->lock);
 
 	icount.cts         = cnow.cts;
 	icount.dsr         = cnow.dsr;
@@ -1158,9 +1161,9 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
 		break;
 
 	default: {
-		struct uart_port *port = state->uart_port;
-		if (port->ops->ioctl)
-			ret = port->ops->ioctl(port, cmd, arg);
+		struct uart_port *uport = state->uart_port;
+		if (uport->ops->ioctl)
+			ret = uport->ops->ioctl(uport, cmd, arg);
 		break;
 	}
 	}
@@ -1173,10 +1176,10 @@ out:
 static void uart_set_ldisc(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->uart_port;
+	struct uart_port *uport = state->uart_port;
 
-	if (port->ops->set_ldisc)
-		port->ops->set_ldisc(port);
+	if (uport->ops->set_ldisc)
+		uport->ops->set_ldisc(uport);
 }
 
 static void uart_set_termios(struct tty_struct *tty,
@@ -1254,16 +1257,15 @@ static void uart_set_termios(struct tty_struct *tty,
 static void uart_close(struct tty_struct *tty, struct file *filp)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port;
+	struct tty_port *port;
+	struct uart_port *uport;
 
 	BUG_ON(!kernel_locked());
 
-	if (!state || !state->uart_port)
-		return;
-
-	port = state->uart_port;
+	uport = state->uart_port;
+	port = &state->port;
 
-	pr_debug("uart_close(%d) called\n", port->line);
+	pr_debug("uart_close(%d) called\n", uport->line);
 
 	mutex_lock(&state->mutex);
 
@@ -1297,8 +1299,8 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 	 */
 	tty->closing = 1;
 
-	if (state->port.closing_wait != USF_CLOSING_WAIT_NONE)
-		tty_wait_until_sent(tty, msecs_to_jiffies(state->port.closing_wait));
+	if (port->closing_wait != USF_CLOSING_WAIT_NONE)
+		tty_wait_until_sent(tty, msecs_to_jiffies(port->closing_wait));
 
 	/*
 	 * At this point, we stop accepting input.  To do this, we
@@ -1307,14 +1309,14 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 	if (state->flags & UIF_INITIALIZED) {
 		unsigned long flags;
 		spin_lock_irqsave(&port->lock, flags);
-		port->ops->stop_rx(port);
+		uport->ops->stop_rx(uport);
 		spin_unlock_irqrestore(&port->lock, flags);
 		/*
 		 * Before we drop DTR, make sure the UART transmitter
 		 * has completely drained; this is especially
 		 * important if there is a transmit FIFO!
 		 */
-		uart_wait_until_sent(tty, port->timeout);
+		uart_wait_until_sent(tty, uport->timeout);
 	}
 
 	uart_shutdown(state);
@@ -1323,12 +1325,12 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 	tty_ldisc_flush(tty);
 
 	tty->closing = 0;
-	state->port.tty = NULL;
+	port->tty = NULL;
 
-	if (state->port.blocked_open) {
-		if (state->port.close_delay)
-			msleep_interruptible(state->port.close_delay);
-	} else if (!uart_console(port)) {
+	if (port->blocked_open) {
+		if (port->close_delay)
+			msleep_interruptible(port->close_delay);
+	} else if (!uart_console(uport)) {
 		uart_change_pm(state, 3);
 	}
 
@@ -1336,9 +1338,9 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 	 * Wake up anyone trying to open this port.
 	 */
 	state->flags &= ~UIF_NORMAL_ACTIVE;
-	wake_up_interruptible(&state->port.open_wait);
+	wake_up_interruptible(&port->open_wait);
 
- done:
+done:
 	mutex_unlock(&state->mutex);
 }
 
@@ -1410,6 +1412,7 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
 static void uart_hangup(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
+	struct tty_port *port = &state->port;
 
 	BUG_ON(!kernel_locked());
 	pr_debug("uart_hangup(%d)\n", state->uart_port->line);
@@ -1420,8 +1423,8 @@ static void uart_hangup(struct tty_struct *tty)
 		uart_shutdown(state);
 		state->count = 0;
 		state->flags &= ~UIF_NORMAL_ACTIVE;
-		state->port.tty = NULL;
-		wake_up_interruptible(&state->port.open_wait);
+		port->tty = NULL;
+		wake_up_interruptible(&port->open_wait);
 		wake_up_interruptible(&state->delta_msr_wait);
 	}
 	mutex_unlock(&state->mutex);
@@ -1470,20 +1473,21 @@ static int
 uart_block_til_ready(struct file *filp, struct uart_state *state)
 {
 	DECLARE_WAITQUEUE(wait, current);
-	struct uart_port *port = state->uart_port;
+	struct uart_port *uport = state->uart_port;
+	struct tty_port *port = &state->port;
 	unsigned int mctrl;
 
-	state->port.blocked_open++;
+	port->blocked_open++;
 	state->count--;
 
-	add_wait_queue(&state->port.open_wait, &wait);
+	add_wait_queue(&port->open_wait, &wait);
 	while (1) {
 		set_current_state(TASK_INTERRUPTIBLE);
 
 		/*
 		 * If we have been hung up, tell userspace/restart open.
 		 */
-		if (tty_hung_up_p(filp) || state->port.tty == NULL)
+		if (tty_hung_up_p(filp) || port->tty == NULL)
 			break;
 
 		/*
@@ -1502,8 +1506,8 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
 		 * have set TTY_IO_ERROR for a non-existant port.
 		 */
 		if ((filp->f_flags & O_NONBLOCK) ||
-		    (state->port.tty->termios->c_cflag & CLOCAL) ||
-		    (state->port.tty->flags & (1 << TTY_IO_ERROR)))
+		    (port->tty->termios->c_cflag & CLOCAL) ||
+		    (port->tty->flags & (1 << TTY_IO_ERROR)))
 			break;
 
 		/*
@@ -1511,17 +1515,17 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
 		 * not set RTS here - we want to make sure we catch
 		 * the data from the modem.
 		 */
-		if (state->port.tty->termios->c_cflag & CBAUD)
-			uart_set_mctrl(port, TIOCM_DTR);
+		if (port->tty->termios->c_cflag & CBAUD)
+			uart_set_mctrl(uport, TIOCM_DTR);
 
 		/*
 		 * and wait for the carrier to indicate that the
 		 * modem is ready for us.
 		 */
-		spin_lock_irq(&port->lock);
-		port->ops->enable_ms(port);
-		mctrl = port->ops->get_mctrl(port);
-		spin_unlock_irq(&port->lock);
+		spin_lock_irq(&uport->lock);
+		uport->ops->enable_ms(uport);
+		mctrl = uport->ops->get_mctrl(uport);
+		spin_unlock_irq(&uport->lock);
 		if (mctrl & TIOCM_CAR)
 			break;
 
@@ -1533,15 +1537,15 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
 			break;
 	}
 	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&state->port.open_wait, &wait);
+	remove_wait_queue(&port->open_wait, &wait);
 
 	state->count++;
-	state->port.blocked_open--;
+	port->blocked_open--;
 
 	if (signal_pending(current))
 		return -ERESTARTSYS;
 
-	if (!state->port.tty || tty_hung_up_p(filp))
+	if (!port->tty || tty_hung_up_p(filp))
 		return -EAGAIN;
 
 	return 0;
Signature · 1 line
1.6.4.2
#51 lore raw

PATCH 49/79 serial: move count into the tty_port version

In reply to Greg KH

From: Alan Cox <[email protected]>

Remove more stuff from the serial special case code

---
 drivers/serial/serial_core.c |   38 ++++++++++++++++++++------------------
 include/linux/serial_core.h  |    1 -
 2 files changed, 20 insertions(+), 19 deletions(-)
drivers/serial/serial_core.c +20 -18
index 0ffefb3..4af3364 100644
@@ -52,7 +52,7 @@ static struct lock_class_key port_lock_key;
 
 #define HIGH_BITS_OFFSET	((sizeof(long)-sizeof(int))*8)
 
-#define uart_users(state)	((state)->count + (state)->port.blocked_open)
+#define uart_users(state)	((state)->port.count + (state)->port.blocked_open)
 
 #ifdef CONFIG_SERIAL_CORE_CONSOLE
 #define uart_console(port)	((port)->cons && (port)->cons->index == (port)->line)
@@ -694,7 +694,7 @@ static int uart_set_info(struct uart_state *state,
 			USF_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
 
 	/*
-	 * This semaphore protects state->count.  It is also
+	 * This semaphore protects port->count.  It is also
 	 * very useful to prevent opens.  Also, take the
 	 * port configuration semaphore to make sure that a
 	 * module insertion/removal doesn't change anything
@@ -1272,24 +1272,24 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 	if (tty_hung_up_p(filp))
 		goto done;
 
-	if ((tty->count == 1) && (state->count != 1)) {
+	if ((tty->count == 1) && (port->count != 1)) {
 		/*
 		 * Uh, oh.  tty->count is 1, which means that the tty
-		 * structure will be freed.  state->count should always
+		 * structure will be freed.  port->count should always
 		 * be one in these conditions.  If it's greater than
 		 * one, we've got real problems, since it means the
 		 * serial port won't be shutdown.
 		 */
 		printk(KERN_ERR "uart_close: bad serial port count; tty->count is 1, "
-		       "state->count is %d\n", state->count);
-		state->count = 1;
+		       "port->count is %d\n", port->count);
+		port->count = 1;
 	}
-	if (--state->count < 0) {
+	if (--port->count < 0) {
 		printk(KERN_ERR "uart_close: bad serial port count for %s: %d\n",
-		       tty->name, state->count);
-		state->count = 0;
+		       tty->name, port->count);
+		port->count = 0;
 	}
-	if (state->count)
+	if (port->count)
 		goto done;
 
 	/*
@@ -1421,7 +1421,7 @@ static void uart_hangup(struct tty_struct *tty)
 	if (state->flags & UIF_NORMAL_ACTIVE) {
 		uart_flush_buffer(tty);
 		uart_shutdown(state);
-		state->count = 0;
+		port->count = 0;
 		state->flags &= ~UIF_NORMAL_ACTIVE;
 		port->tty = NULL;
 		wake_up_interruptible(&port->open_wait);
@@ -1478,7 +1478,7 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
 	unsigned int mctrl;
 
 	port->blocked_open++;
-	state->count--;
+	port->count--;
 
 	add_wait_queue(&port->open_wait, &wait);
 	while (1) {
@@ -1539,7 +1539,7 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
 	set_current_state(TASK_RUNNING);
 	remove_wait_queue(&port->open_wait, &wait);
 
-	state->count++;
+	port->count++;
 	port->blocked_open--;
 
 	if (signal_pending(current))
@@ -1562,7 +1562,7 @@ static struct uart_state *uart_get(struct uart_driver *drv, int line)
 		goto err;
 	}
 
-	state->count++;
+	state->port.count++;
 	if (!state->uart_port || state->uart_port->flags & UPF_DEAD) {
 		ret = -ENXIO;
 		goto err_unlock;
@@ -1570,7 +1570,7 @@ static struct uart_state *uart_get(struct uart_driver *drv, int line)
 	return state;
 
  err_unlock:
-	state->count--;
+	state->port.count--;
 	mutex_unlock(&state->mutex);
  err:
 	return ERR_PTR(ret);
@@ -1590,6 +1590,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
 {
 	struct uart_driver *drv = (struct uart_driver *)tty->driver->driver_state;
 	struct uart_state *state;
+	struct tty_port *port;
 	int retval, line = tty->index;
 
 	BUG_ON(!kernel_locked());
@@ -1617,6 +1618,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
 		retval = PTR_ERR(state);
 		goto fail;
 	}
+	port = &state->port;
 
 	/*
 	 * Once we set tty->driver_data here, we are guaranteed that
@@ -1627,14 +1629,14 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
 	state->uart_port->state = state;
 	tty->low_latency = (state->uart_port->flags & UPF_LOW_LATENCY) ? 1 : 0;
 	tty->alt_speed = 0;
-	state->port.tty = tty;
+	port->tty = tty;
 
 	/*
 	 * If the port is in the middle of closing, bail out now.
 	 */
 	if (tty_hung_up_p(filp)) {
 		retval = -EAGAIN;
-		state->count--;
+		port->count--;
 		mutex_unlock(&state->mutex);
 		goto fail;
 	}
@@ -1642,7 +1644,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
 	/*
 	 * Make sure the device is in D0 state.
 	 */
-	if (state->count == 1)
+	if (port->count == 1)
 		uart_change_pm(state, 0);
 
 	/*
include/linux/serial_core.h +0 -1
index fd11d4d..63ad909 100644
@@ -354,7 +354,6 @@ struct uart_state {
 #define USF_CLOSING_WAIT_INF	(0)
 #define USF_CLOSING_WAIT_NONE	(~0U)
 
-	int			count;
 	int			pm_state;
 	struct circ_buf		xmit;
 	uif_t			flags;
Signature · 1 line
1.6.4.2
#52 lore raw

PATCH 50/79 serial: move the flags into the tty_port field

In reply to Greg KH

From: Alan Cox <[email protected]>

Fortunately the serial layer was designed to use the same flag values but with different names. It has its own SUSPENDED flag which is a free slot in the ASYNC flags so we allocate it in the ASYNC flags instead.

---
 drivers/serial/serial_core.c |  153 +++++++++++++++++++++---------------------
 include/linux/serial.h       |    2 +
 include/linux/serial_core.h  |   48 +++++--------
 3 files changed, 98 insertions(+), 105 deletions(-)
drivers/serial/serial_core.c +77 -76
index 4af3364..744dec9 100644
@@ -29,10 +29,10 @@
 #include <linux/console.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
-#include <linux/serial_core.h>
 #include <linux/smp_lock.h>
 #include <linux/device.h>
 #include <linux/serial.h> /* for serial_state and serial_icounter_struct */
+#include <linux/serial_core.h>
 #include <linux/delay.h>
 #include <linux/mutex.h>
 
@@ -146,7 +146,7 @@ static int uart_startup(struct uart_state *state, int init_hw)
 	unsigned long page;
 	int retval = 0;
 
-	if (state->flags & UIF_INITIALIZED)
+	if (port->flags & ASYNC_INITIALIZED)
 		return 0;
 
 	/*
@@ -189,14 +189,14 @@ static int uart_startup(struct uart_state *state, int init_hw)
 				uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
 		}
 
-		if (state->flags & UIF_CTS_FLOW) {
+		if (port->flags & ASYNC_CTS_FLOW) {
 			spin_lock_irq(&uport->lock);
 			if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS))
 				port->tty->hw_stopped = 1;
 			spin_unlock_irq(&uport->lock);
 		}
 
-		state->flags |= UIF_INITIALIZED;
+		set_bit(ASYNCB_INITIALIZED, &port->flags);
 
 		clear_bit(TTY_IO_ERROR, &port->tty->flags);
 	}
@@ -214,7 +214,7 @@ static int uart_startup(struct uart_state *state, int init_hw)
  */
 static void uart_shutdown(struct uart_state *state)
 {
-	struct uart_port *port = state->uart_port;
+	struct uart_port *uport = state->uart_port;
 	struct tty_struct *tty = state->port.tty;
 
 	/*
@@ -223,14 +223,12 @@ static void uart_shutdown(struct uart_state *state)
 	if (tty)
 		set_bit(TTY_IO_ERROR, &tty->flags);
 
-	if (state->flags & UIF_INITIALIZED) {
-		state->flags &= ~UIF_INITIALIZED;
-
+	if (test_and_clear_bit(ASYNCB_INITIALIZED, &state->port.flags)) {
 		/*
 		 * Turn off DTR and RTS early.
 		 */
 		if (!tty || (tty->termios->c_cflag & HUPCL))
-			uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+			uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
 
 		/*
 		 * clear delta_msr_wait queue to avoid mem leaks: we may free
@@ -244,12 +242,12 @@ static void uart_shutdown(struct uart_state *state)
 		/*
 		 * Free the IRQ and disable the port.
 		 */
-		port->ops->shutdown(port);
+		uport->ops->shutdown(uport);
 
 		/*
 		 * Ensure that the IRQ handler isn't running on another CPU.
 		 */
-		synchronize_irq(port->irq);
+		synchronize_irq(uport->irq);
 	}
 
 	/*
@@ -429,15 +427,16 @@ EXPORT_SYMBOL(uart_get_divisor);
 static void
 uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
 {
-	struct tty_struct *tty = state->port.tty;
-	struct uart_port *port = state->uart_port;
+	struct tty_port *port = &state->port;
+	struct tty_struct *tty = port->tty;
+	struct uart_port *uport = state->uart_port;
 	struct ktermios *termios;
 
 	/*
 	 * If we have no tty, termios, or the port does not exist,
 	 * then we can't set the parameters for this port.
 	 */
-	if (!tty || !tty->termios || port->type == PORT_UNKNOWN)
+	if (!tty || !tty->termios || uport->type == PORT_UNKNOWN)
 		return;
 
 	termios = tty->termios;
@@ -446,16 +445,16 @@ uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
 	 * Set flags based on termios cflag
 	 */
 	if (termios->c_cflag & CRTSCTS)
-		state->flags |= UIF_CTS_FLOW;
+		set_bit(ASYNCB_CTS_FLOW, &port->flags);
 	else
-		state->flags &= ~UIF_CTS_FLOW;
+		clear_bit(ASYNCB_CTS_FLOW, &port->flags);
 
 	if (termios->c_cflag & CLOCAL)
-		state->flags &= ~UIF_CHECK_CD;
+		clear_bit(ASYNCB_CHECK_CD, &port->flags);
 	else
-		state->flags |= UIF_CHECK_CD;
+		set_bit(ASYNCB_CHECK_CD, &port->flags);
 
-	port->ops->set_termios(port, termios, old_termios);
+	uport->ops->set_termios(uport, termios, old_termios);
 }
 
 static inline int
@@ -848,7 +847,7 @@ static int uart_set_info(struct uart_state *state,
 	retval = 0;
 	if (uport->type == PORT_UNKNOWN)
 		goto exit;
-	if (state->flags & UIF_INITIALIZED) {
+	if (port->flags & ASYNC_INITIALIZED) {
 		if (((old_flags ^ uport->flags) & UPF_SPD_MASK) ||
 		    old_custom_divisor != uport->custom_divisor) {
 			/*
@@ -1306,7 +1305,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 	 * At this point, we stop accepting input.  To do this, we
 	 * disable the receive line status interrupts.
 	 */
-	if (state->flags & UIF_INITIALIZED) {
+	if (port->flags & ASYNC_INITIALIZED) {
 		unsigned long flags;
 		spin_lock_irqsave(&port->lock, flags);
 		uport->ops->stop_rx(uport);
@@ -1337,7 +1336,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 	/*
 	 * Wake up anyone trying to open this port.
 	 */
-	state->flags &= ~UIF_NORMAL_ACTIVE;
+	clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
 	wake_up_interruptible(&port->open_wait);
 
 done:
@@ -1418,11 +1417,11 @@ static void uart_hangup(struct tty_struct *tty)
 	pr_debug("uart_hangup(%d)\n", state->uart_port->line);
 
 	mutex_lock(&state->mutex);
-	if (state->flags & UIF_NORMAL_ACTIVE) {
+	if (port->flags & ASYNC_NORMAL_ACTIVE) {
 		uart_flush_buffer(tty);
 		uart_shutdown(state);
 		port->count = 0;
-		state->flags &= ~UIF_NORMAL_ACTIVE;
+		clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
 		port->tty = NULL;
 		wake_up_interruptible(&port->open_wait);
 		wake_up_interruptible(&state->delta_msr_wait);
@@ -1493,7 +1492,7 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
 		/*
 		 * If the port has been closed, tell userspace/restart open.
 		 */
-		if (!(state->flags & UIF_INITIALIZED))
+		if (!(port->flags & ASYNC_INITIALIZED))
 			break;
 
 		/*
@@ -1662,8 +1661,8 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
 	/*
 	 * If this is the first open to succeed, adjust things to suit.
 	 */
-	if (retval == 0 && !(state->flags & UIF_NORMAL_ACTIVE)) {
-		state->flags |= UIF_NORMAL_ACTIVE;
+	if (retval == 0 && !(port->flags & ASYNC_NORMAL_ACTIVE)) {
+		set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
 
 		uart_update_termios(state);
 	}
@@ -1985,63 +1984,64 @@ static int serial_match_port(struct device *dev, void *data)
 	return dev->devt == devt; /* Actually, only one tty per port */
 }
 
-int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
+int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
 {
-	struct uart_state *state = drv->state + port->line;
+	struct uart_state *state = drv->state + uport->line;
+	struct tty_port *port = &state->port;
 	struct device *tty_dev;
-	struct uart_match match = {port, drv};
+	struct uart_match match = {uport, drv};
 
 	mutex_lock(&state->mutex);
 
-	if (!console_suspend_enabled && uart_console(port)) {
+	if (!console_suspend_enabled && uart_console(uport)) {
 		/* we're going to avoid suspending serial console */
 		mutex_unlock(&state->mutex);
 		return 0;
 	}
 
-	tty_dev = device_find_child(port->dev, &match, serial_match_port);
+	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
 	if (device_may_wakeup(tty_dev)) {
-		enable_irq_wake(port->irq);
+		enable_irq_wake(uport->irq);
 		put_device(tty_dev);
 		mutex_unlock(&state->mutex);
 		return 0;
 	}
-	port->suspended = 1;
+	uport->suspended = 1;
 
-	if (state->flags & UIF_INITIALIZED) {
-		const struct uart_ops *ops = port->ops;
+	if (port->flags & ASYNC_INITIALIZED) {
+		const struct uart_ops *ops = uport->ops;
 		int tries;
 
-		state->flags = (state->flags & ~UIF_INITIALIZED)
-				     | UIF_SUSPENDED;
+		set_bit(ASYNCB_SUSPENDED, &port->flags);
+		clear_bit(ASYNCB_INITIALIZED, &port->flags);
 
-		spin_lock_irq(&port->lock);
-		ops->stop_tx(port);
-		ops->set_mctrl(port, 0);
-		ops->stop_rx(port);
-		spin_unlock_irq(&port->lock);
+		spin_lock_irq(&uport->lock);
+		ops->stop_tx(uport);
+		ops->set_mctrl(uport, 0);
+		ops->stop_rx(uport);
+		spin_unlock_irq(&uport->lock);
 
 		/*
 		 * Wait for the transmitter to empty.
 		 */
-		for (tries = 3; !ops->tx_empty(port) && tries; tries--)
+		for (tries = 3; !ops->tx_empty(uport) && tries; tries--)
 			msleep(10);
 		if (!tries)
 			printk(KERN_ERR "%s%s%s%d: Unable to drain "
 					"transmitter\n",
-			       port->dev ? dev_name(port->dev) : "",
-			       port->dev ? ": " : "",
+			       uport->dev ? dev_name(uport->dev) : "",
+			       uport->dev ? ": " : "",
 			       drv->dev_name,
-			       drv->tty_driver->name_base + port->line);
+			       drv->tty_driver->name_base + uport->line);
 
-		ops->shutdown(port);
+		ops->shutdown(uport);
 	}
 
 	/*
 	 * Disable the console device before suspending.
 	 */
-	if (uart_console(port))
-		console_stop(port->cons);
+	if (uart_console(uport))
+		console_stop(uport->cons);
 
 	uart_change_pm(state, 3);
 
@@ -2050,67 +2050,68 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
 	return 0;
 }
 
-int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
+int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 {
-	struct uart_state *state = drv->state + port->line;
+	struct uart_state *state = drv->state + uport->line;
+	struct tty_port *port = &state->port;
 	struct device *tty_dev;
-	struct uart_match match = {port, drv};
+	struct uart_match match = {uport, drv};
 
 	mutex_lock(&state->mutex);
 
-	if (!console_suspend_enabled && uart_console(port)) {
+	if (!console_suspend_enabled && uart_console(uport)) {
 		/* no need to resume serial console, it wasn't suspended */
 		mutex_unlock(&state->mutex);
 		return 0;
 	}
 
-	tty_dev = device_find_child(port->dev, &match, serial_match_port);
-	if (!port->suspended && device_may_wakeup(tty_dev)) {
-		disable_irq_wake(port->irq);
+	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
+	if (!uport->suspended && device_may_wakeup(tty_dev)) {
+		disable_irq_wake(uport->irq);
 		mutex_unlock(&state->mutex);
 		return 0;
 	}
-	port->suspended = 0;
+	uport->suspended = 0;
 
 	/*
 	 * Re-enable the console device after suspending.
 	 */
-	if (uart_console(port)) {
+	if (uart_console(uport)) {
 		struct ktermios termios;
 
 		/*
 		 * First try to use the console cflag setting.
 		 */
 		memset(&termios, 0, sizeof(struct ktermios));
-		termios.c_cflag = port->cons->cflag;
+		termios.c_cflag = uport->cons->cflag;
 
 		/*
 		 * If that's unset, use the tty termios setting.
 		 */
-		if (state->port.tty && termios.c_cflag == 0)
-			termios = *state->port.tty->termios;
+		if (port->tty && termios.c_cflag == 0)
+			termios = *port->tty->termios;
 
 		uart_change_pm(state, 0);
-		port->ops->set_termios(port, &termios, NULL);
-		console_start(port->cons);
+		uport->ops->set_termios(uport, &termios, NULL);
+		console_start(uport->cons);
 	}
 
-	if (state->flags & UIF_SUSPENDED) {
-		const struct uart_ops *ops = port->ops;
+	if (port->flags & ASYNC_SUSPENDED) {
+		const struct uart_ops *ops = uport->ops;
 		int ret;
 
 		uart_change_pm(state, 0);
-		spin_lock_irq(&port->lock);
-		ops->set_mctrl(port, 0);
-		spin_unlock_irq(&port->lock);
-		ret = ops->startup(port);
+		spin_lock_irq(&uport->lock);
+		ops->set_mctrl(uport, 0);
+		spin_unlock_irq(&uport->lock);
+		ret = ops->startup(uport);
 		if (ret == 0) {
 			uart_change_speed(state, NULL);
-			spin_lock_irq(&port->lock);
-			ops->set_mctrl(port, port->mctrl);
-			ops->start_tx(port);
-			spin_unlock_irq(&port->lock);
-			state->flags |= UIF_INITIALIZED;
+			spin_lock_irq(&uport->lock);
+			ops->set_mctrl(uport, uport->mctrl);
+			ops->start_tx(uport);
+			spin_unlock_irq(&uport->lock);
+			set_bit(ASYNCB_INITIALIZED, &port->flags);
 		} else {
 			/*
 			 * Failed to resume - maybe hardware went away?
@@ -2120,7 +2121,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
 			uart_shutdown(state);
 		}
 
-		state->flags &= ~UIF_SUSPENDED;
+		clear_bit(ASYNCB_SUSPENDED, &port->flags);
 	}
 
 	mutex_unlock(&state->mutex);
include/linux/serial.h +2 -0
index e5bb75a..c8613c3 100644
@@ -122,6 +122,7 @@ struct serial_uart_config {
 
 /* Internal flags used only by kernel */
 #define ASYNCB_INITIALIZED	31 /* Serial port was initialized */
+#define ASYNCB_SUSPENDED	30 /* Serial port is suspended */
 #define ASYNCB_NORMAL_ACTIVE	29 /* Normal device is active */
 #define ASYNCB_BOOT_AUTOCONF	28 /* Autoconfigure port on bootup */
 #define ASYNCB_CLOSING		27 /* Serial port is closing */
@@ -133,6 +134,7 @@ struct serial_uart_config {
 #define ASYNCB_FIRST_KERNEL	22
 
 #define ASYNC_HUP_NOTIFY	(1U << ASYNCB_HUP_NOTIFY)
+#define ASYNC_SUSPENDED		(1U << ASYNCB_SUSPENDED)
 #define ASYNC_FOURPORT		(1U << ASYNCB_FOURPORT)
 #define ASYNC_SAK		(1U << ASYNCB_SAK)
 #define ASYNC_SPLIT_TERMIOS	(1U << ASYNCB_SPLIT_TERMIOS)
include/linux/serial_core.h +19 -29

90 lines not on this page · raw message

Signature · 1 line
1.6.4.2
#53 lore raw

PATCH 51/79 serial: kill off uif_t

In reply to Greg KH

From: Alan Cox <[email protected]>

This typedef is now extinct

---
 include/linux/serial_core.h |   11 -----------
 1 files changed, 0 insertions(+), 11 deletions(-)
include/linux/serial_core.h +0 -11
index 284ef7f..f98dc78 100644
@@ -337,18 +337,7 @@ struct uart_port {
 };
 
 /*
- * This is the state information which is only valid when the port
- * is open; it may be cleared the core driver once the device has
- * been closed.  Either the low level driver or the core can modify
- * stuff here.
- */
-typedef unsigned int __bitwise__ uif_t;
-
-
-/*
  * This is the state information which is persistent across opens.
- * The low level driver must not to touch any elements contained
- * within.
  */
 struct uart_state {
 	struct tty_port		port;
Signature · 1 line
1.6.4.2
#54 lore raw

PATCH 52/79 serial: replace the state mutex with the tty port mutex

In reply to Greg KH

From: Alan Cox <[email protected]>

They cover essentially the same stuff and we can therefore fold it into the tty_port one.

---
 drivers/serial/pmac_zilog.c  |    8 +-
 drivers/serial/serial_core.c |  227 ++++++++++++++++++++++--------------------
 include/linux/serial_core.h  |    2 -
 3 files changed, 123 insertions(+), 114 deletions(-)
drivers/serial/pmac_zilog.c +4 -4
index ab4c85b..0dc7868 100644
@@ -1645,7 +1645,7 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
 	state = pmz_uart_reg.state + uap->port.line;
 
 	mutex_lock(&pmz_irq_mutex);
-	mutex_lock(&state->mutex);
+	mutex_lock(&state->port.mutex);
 
 	spin_lock_irqsave(&uap->port.lock, flags);
 
@@ -1676,7 +1676,7 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
 	/* Shut the chip down */
 	pmz_set_scc_power(uap, 0);
 
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&state->port.mutex);
 	mutex_unlock(&pmz_irq_mutex);
 
 	pmz_debug("suspend, switching complete\n");
@@ -1705,7 +1705,7 @@ static int pmz_resume(struct macio_dev *mdev)
 	state = pmz_uart_reg.state + uap->port.line;
 
 	mutex_lock(&pmz_irq_mutex);
-	mutex_lock(&state->mutex);
+	mutex_lock(&state->port.mutex);
 
 	spin_lock_irqsave(&uap->port.lock, flags);
 	if (!ZS_IS_OPEN(uap) && !ZS_IS_CONS(uap)) {
@@ -1737,7 +1737,7 @@ static int pmz_resume(struct macio_dev *mdev)
 	}
 
  bail:
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&state->port.mutex);
 	mutex_unlock(&pmz_irq_mutex);
 
 	/* Right now, we deal with delay by blocking here, I'll be
drivers/serial/serial_core.c +119 -108

559 lines not on this page · raw message

include/linux/serial_core.h +0 -2
index f98dc78..27767ea 100644
@@ -351,8 +351,6 @@ struct uart_state {
 	struct tasklet_struct	tlet;
 	wait_queue_head_t	delta_msr_wait;
 	struct uart_port	*uart_port;
-
-	struct mutex		mutex;
 };
 
 #define UART_XMIT_SIZE	PAGE_SIZE
Signature · 1 line
1.6.4.2
#55 lore raw

PATCH 53/79 serial: move delta_msr_wait into the tty_port

In reply to Greg KH

From: Alan Cox <[email protected]>

This is used by various drivers not just serial and can be extracted as commonality

---
 drivers/char/cyclades.c         |    9 ++++-----
 drivers/char/esp.c              |    7 +++----
 drivers/char/mxser.c            |    8 +++-----
 drivers/char/tty_port.c         |    2 ++
 drivers/serial/8250.c           |    2 +-
 drivers/serial/amba-pl010.c     |    2 +-
 drivers/serial/amba-pl011.c     |    2 +-
 drivers/serial/atmel_serial.c   |    2 +-
 drivers/serial/icom.c           |    2 +-
 drivers/serial/imx.c            |    4 ++--
 drivers/serial/ioc3_serial.c    |    8 ++++----
 drivers/serial/ioc4_serial.c    |    8 ++++----
 drivers/serial/ip22zilog.c      |    2 +-
 drivers/serial/msm_serial.c     |    2 +-
 drivers/serial/pmac_zilog.c     |    2 +-
 drivers/serial/pnx8xxx_uart.c   |    2 +-
 drivers/serial/pxa.c            |    2 +-
 drivers/serial/sa1100.c         |    2 +-
 drivers/serial/sb1250-duart.c   |    2 +-
 drivers/serial/serial_core.c    |   18 +++++++++++-------
 drivers/serial/serial_ks8695.c  |    2 +-
 drivers/serial/serial_lh7a40x.c |    2 +-
 drivers/serial/sunsab.c         |    2 +-
 drivers/serial/sunsu.c          |    2 +-
 drivers/serial/sunzilog.c       |    2 +-
 drivers/serial/timbuart.c       |    2 +-
 drivers/serial/vr41xx_siu.c     |    2 +-
 drivers/serial/zs.c             |    2 +-
 include/linux/cyclades.h        |    1 -
 include/linux/hayesesp.h        |    1 -
 include/linux/serial_core.h     |    1 -
 include/linux/tty.h             |    1 +
 32 files changed, 54 insertions(+), 54 deletions(-)
drivers/char/cyclades.c +4 -5
index 70bd61b..df5038b 100644
@@ -729,7 +729,7 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
 		if (mdm_change & CyRI)
 			info->icount.rng++;
 
-		wake_up_interruptible(&info->delta_msr_wait);
+		wake_up_interruptible(&info->port.delta_msr_wait);
 	}
 
 	if ((mdm_change & CyDCD) && (info->port.flags & ASYNC_CHECK_CD)) {
@@ -1197,7 +1197,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 			break;
 		}
 		if (delta_count)
-			wake_up_interruptible(&info->delta_msr_wait);
+			wake_up_interruptible(&info->port.delta_msr_wait);
 		if (special_count)
 			tty_schedule_flip(tty);
 		tty_kref_put(tty);
@@ -1464,7 +1464,7 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
 		spin_lock_irqsave(&card->card_lock, flags);
 
 		/* Clear delta_msr_wait queue to avoid mem leaks. */
-		wake_up_interruptible(&info->delta_msr_wait);
+		wake_up_interruptible(&info->port.delta_msr_wait);
 
 		if (info->port.xmit_buf) {
 			unsigned char *temp;
@@ -2788,7 +2788,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 		/* note the counters on entry */
 		cnow = info->icount;
 		spin_unlock_irqrestore(&info->card->card_lock, flags);
-		ret_val = wait_event_interruptible(info->delta_msr_wait,
+		ret_val = wait_event_interruptible(info->port.delta_msr_wait,
 				cy_cflags_changed(info, arg, &cnow));
 		break;
 
@@ -3153,7 +3153,6 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
 		info->port.close_delay = 5 * HZ / 10;
 		info->port.flags = STD_COM_FLAGS;
 		init_completion(&info->shutdown_wait);
-		init_waitqueue_head(&info->delta_msr_wait);
 
 		if (cy_is_Z(cinfo)) {
 			struct FIRM_ID *firm_id = cinfo->base_addr + ID_ADDRESS;
drivers/char/esp.c +3 -4
index a5c59fc..b19d43c 100644
@@ -572,7 +572,7 @@ static void check_modem_status(struct esp_struct *info)
 			info->icount.dcd++;
 		if (status & UART_MSR_DCTS)
 			info->icount.cts++;
-		wake_up_interruptible(&info->delta_msr_wait);
+		wake_up_interruptible(&info->port.delta_msr_wait);
 	}
 
 	if ((info->port.flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
@@ -927,7 +927,7 @@ static void shutdown(struct esp_struct *info)
 	 * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
 	 * here so the queue might never be waken up
 	 */
-	wake_up_interruptible(&info->delta_msr_wait);
+	wake_up_interruptible(&info->port.delta_msr_wait);
 	wake_up_interruptible(&info->break_wait);
 
 	/* stop a DMA transfer on the port being closed */
@@ -1800,7 +1800,7 @@ static int rs_ioctl(struct tty_struct *tty, struct file *file,
 		spin_unlock_irqrestore(&info->lock, flags);
 		while (1) {
 			/* FIXME: convert to new style wakeup */
-			interruptible_sleep_on(&info->delta_msr_wait);
+			interruptible_sleep_on(&info->port.delta_msr_wait);
 			/* see if a signal did it */
 			if (signal_pending(current))
 				return -ERESTARTSYS;
@@ -2452,7 +2452,6 @@ static int __init espserial_init(void)
 		info->config.flow_off = flow_off;
 		info->config.pio_threshold = pio_threshold;
 		info->next_port = ports;
-		init_waitqueue_head(&info->delta_msr_wait);
 		init_waitqueue_head(&info->break_wait);
 		ports = info;
 		printk(KERN_INFO "ttyP%d at 0x%04x (irq = %d) is an ESP ",
drivers/char/mxser.c +3 -5
index 30544ca..37058ff 100644
@@ -258,7 +258,6 @@ struct mxser_port {
 	struct mxser_mon mon_data;
 
 	spinlock_t slock;
-	wait_queue_head_t delta_msr_wait;
 };
 
 struct mxser_board {
@@ -818,7 +817,7 @@ static void mxser_check_modem_status(struct tty_struct *tty,
 	if (status & UART_MSR_DCTS)
 		port->icount.cts++;
 	port->mon_data.modem_status = status;
-	wake_up_interruptible(&port->delta_msr_wait);
+	wake_up_interruptible(&port->port.delta_msr_wait);
 
 	if ((port->port.flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
 		if (status & UART_MSR_DCD)
@@ -973,7 +972,7 @@ static void mxser_shutdown(struct tty_struct *tty)
 	 * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
 	 * here so the queue might never be waken up
 	 */
-	wake_up_interruptible(&info->delta_msr_wait);
+	wake_up_interruptible(&info->port.delta_msr_wait);
 
 	/*
 	 * Free the IRQ, if necessary
@@ -1762,7 +1761,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
 		cnow = info->icount;	/* note the counters on entry */
 		spin_unlock_irqrestore(&info->slock, flags);
 
-		return wait_event_interruptible(info->delta_msr_wait,
+		return wait_event_interruptible(info->port.delta_msr_wait,
 				mxser_cflags_changed(info, arg, &cnow));
 	/*
 	 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
@@ -2414,7 +2413,6 @@ static int __devinit mxser_initbrd(struct mxser_board *brd,
 		info->port.close_delay = 5 * HZ / 10;
 		info->port.closing_wait = 30 * HZ;
 		info->normal_termios = mxvar_sdriver->init_termios;
-		init_waitqueue_head(&info->delta_msr_wait);
 		memset(&info->mon_data, 0, sizeof(struct mxser_mon));
 		info->err_shadow = 0;
 		spin_lock_init(&info->slock);
drivers/char/tty_port.c +2 -0
index 549bd0f..c767e30 100644
@@ -23,6 +23,7 @@ void tty_port_init(struct tty_port *port)
 	memset(port, 0, sizeof(*port));
 	init_waitqueue_head(&port->open_wait);
 	init_waitqueue_head(&port->close_wait);
+	init_waitqueue_head(&port->delta_msr_wait);
 	mutex_init(&port->mutex);
 	spin_lock_init(&port->lock);
 	port->close_delay = (50 * HZ) / 100;
@@ -124,6 +125,7 @@ void tty_port_hangup(struct tty_port *port)
 	port->tty = NULL;
 	spin_unlock_irqrestore(&port->lock, flags);
 	wake_up_interruptible(&port->open_wait);
+	wake_up_interruptible(&port->delta_msr_wait);
 	tty_port_shutdown(port);
 }
 EXPORT_SYMBOL(tty_port_hangup);
drivers/serial/8250.c +1 -1
index e415c5e..2209620 100644
@@ -1510,7 +1510,7 @@ static unsigned int check_modem_status(struct uart_8250_port *up)
 		if (status & UART_MSR_DCTS)
 			uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
 
-		wake_up_interruptible(&up->port.state->delta_msr_wait);
+		wake_up_interruptible(&up->port.state->port.delta_msr_wait);
 	}
 
 	return status;
drivers/serial/amba-pl010.c +1 -1
index 3903241..429a8ae 100644
@@ -225,7 +225,7 @@ static void pl010_modem_status(struct uart_amba_port *uap)
 	if (delta & UART01x_FR_CTS)
 		uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
 
-	wake_up_interruptible(&uap->port.state->delta_msr_wait);
+	wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
 }
 
 static irqreturn_t pl010_int(int irq, void *dev_id)
drivers/serial/amba-pl011.c +1 -1
index ef82a34..ef7adc8 100644
@@ -226,7 +226,7 @@ static void pl011_modem_status(struct uart_amba_port *uap)
 	if (delta & UART01x_FR_CTS)
 		uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
 
-	wake_up_interruptible(&uap->port.state->delta_msr_wait);
+	wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
 }
 
 static irqreturn_t pl011_int(int irq, void *dev_id)
drivers/serial/atmel_serial.c +1 -1
index 963e3c1..3551c5c 100644
@@ -776,7 +776,7 @@ static void atmel_tasklet_func(unsigned long data)
 		if (status_change & ATMEL_US_CTS)
 			uart_handle_cts_change(port, !(status & ATMEL_US_CTS));
 
-		wake_up_interruptible(&port->state->delta_msr_wait);
+		wake_up_interruptible(&port->state->port.delta_msr_wait);
 
 		atmel_port->irq_status_prev = status;
 	}
drivers/serial/icom.c +1 -1
index f86c47e..2d7feec 100644
@@ -695,7 +695,7 @@ static inline void check_modem_status(struct icom_port *icom_port)
 					       delta_status & ICOM_CTS);
 
 		wake_up_interruptible(&icom_port->uart_port.state->
-				      delta_msr_wait);
+				      port.delta_msr_wait);
 		old_status = status;
 	}
 	spin_unlock(&icom_port->uart_port.lock);
drivers/serial/imx.c +2 -2
index 1febeaf..18130f1 100644
@@ -224,7 +224,7 @@ static void imx_mctrl_check(struct imx_port *sport)
 	if (changed & TIOCM_CTS)
 		uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
 
-	wake_up_interruptible(&sport->port.state->delta_msr_wait);
+	wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
 }
 
 /*
@@ -388,7 +388,7 @@ static irqreturn_t imx_rtsint(int irq, void *dev_id)
 
 	writel(USR1_RTSD, sport->port.membase + USR1);
 	uart_handle_cts_change(&sport->port, !!val);
-	wake_up_interruptible(&sport->port.state->delta_msr_wait);
+	wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
 
 	spin_unlock_irqrestore(&sport->port.lock, flags);
 	return IRQ_HANDLED;
drivers/serial/ioc3_serial.c +4 -4
index de4ab1b..d8983dd 100644
@@ -1287,7 +1287,7 @@ static inline int do_read(struct uart_port *the_port, char *buf, int len)
 							(port->ip_port, 0);
 						wake_up_interruptible
 						    (&the_port->state->
-						     delta_msr_wait);
+						     port.delta_msr_wait);
 					}
 
 					/* If we had any data to return, we
@@ -1491,7 +1491,7 @@ ioc3uart_intr_one(struct ioc3_submodule *is,
 				uart_handle_dcd_change(the_port,
 						shadow & SHADOW_DCD);
 				wake_up_interruptible
-				    (&the_port->state->delta_msr_wait);
+				    (&the_port->state->port.delta_msr_wait);
 			} else if ((port->ip_notify & N_DDCD)
 				   && !(shadow & SHADOW_DCD)) {
 				/* Flag delta DCD/no DCD */
@@ -1511,7 +1511,7 @@ ioc3uart_intr_one(struct ioc3_submodule *is,
 				uart_handle_cts_change(the_port, shadow
 						& SHADOW_CTS);
 				wake_up_interruptible
-				    (&the_port->state->delta_msr_wait);
+				    (&the_port->state->port.delta_msr_wait);
 			}
 		}
 
@@ -1728,7 +1728,7 @@ static void ic3_shutdown(struct uart_port *the_port)
 		return;
 
 	state = the_port->state;
-	wake_up_interruptible(&state->delta_msr_wait);
+	wake_up_interruptible(&state->port.delta_msr_wait);
 
 	spin_lock_irqsave(&the_port->lock, port_flags);
 	set_notification(port, N_ALL, 0);
drivers/serial/ioc4_serial.c +4 -4
index 2055d32..2e02c30 100644
@@ -1882,7 +1882,7 @@ static void handle_intr(void *arg, uint32_t sio_ir)
 				the_port = port->ip_port;
 				the_port->icount.dcd = 1;
 				wake_up_interruptible
-					    (&the_port->state->delta_msr_wait);
+					    (&the_port->state->port.delta_msr_wait);
 			} else if ((port->ip_notify & N_DDCD)
 					&& !(shadow & IOC4_SHADOW_DCD)) {
 				/* Flag delta DCD/no DCD */
@@ -1904,7 +1904,7 @@ static void handle_intr(void *arg, uint32_t sio_ir)
 				the_port->icount.cts =
 					(shadow & IOC4_SHADOW_CTS) ? 1 : 0;
 				wake_up_interruptible
-					(&the_port->state->delta_msr_wait);
+					(&the_port->state->port.delta_msr_wait);
 			}
 		}
 
@@ -2237,7 +2237,7 @@ static inline int do_read(struct uart_port *the_port, unsigned char *buf,
 						the_port->icount.dcd = 0;
 						wake_up_interruptible
 						    (&the_port->state->
-							delta_msr_wait);
+							port.delta_msr_wait);
 					}
 
 					/* If we had any data to return, we
@@ -2439,7 +2439,7 @@ static void ic4_shutdown(struct uart_port *the_port)
 	state = the_port->state;
 	port->ip_port = NULL;
 
-	wake_up_interruptible(&state->delta_msr_wait);
+	wake_up_interruptible(&state->port.delta_msr_wait);
 
 	if (state->port.tty)
 		set_bit(TTY_IO_ERROR, &state->port.tty->flags);
drivers/serial/ip22zilog.c +1 -1
index 2e847de..ebff4a1 100644
@@ -354,7 +354,7 @@ static void ip22zilog_status_handle(struct uart_ip22zilog_port *up,
 			uart_handle_cts_change(&up->port,
 					       (status & CTS));
 
-		wake_up_interruptible(&up->port.state->delta_msr_wait);
+		wake_up_interruptible(&up->port.state->port.delta_msr_wait);
 	}
 
 	up->prev_status = status;
drivers/serial/msm_serial.c +1 -1
index ff18d50..b05c5aa 100644
@@ -169,7 +169,7 @@ static void handle_delta_cts(struct uart_port *port)
 {
 	msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
 	port->icount.cts++;
-	wake_up_interruptible(&port->state->delta_msr_wait);
+	wake_up_interruptible(&port->state->port.delta_msr_wait);
 }
 
 static irqreturn_t msm_irq(int irq, void *dev_id)
drivers/serial/pmac_zilog.c +1 -1
index 0dc7868..0700cd1 100644
@@ -369,7 +369,7 @@ static void pmz_status_handle(struct uart_pmac_port *uap)
 			uart_handle_cts_change(&uap->port,
 					       !(status & CTS));
 
-		wake_up_interruptible(&uap->port.state->delta_msr_wait);
+		wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
 	}
 
 	if (status & BRK_ABRT)
drivers/serial/pnx8xxx_uart.c +1 -1
index 2da7476..0aa75a9 100644
@@ -100,7 +100,7 @@ static void pnx8xxx_mctrl_check(struct pnx8xxx_port *sport)
 	if (changed & TIOCM_CTS)
 		uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
 
-	wake_up_interruptible(&sport->port.state->delta_msr_wait);
+	wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
 }
 
 /*
drivers/serial/pxa.c +1 -1
index ad48919..6443b7f 100644
@@ -220,7 +220,7 @@ static inline void check_modem_status(struct uart_pxa_port *up)
 	if (status & UART_MSR_DCTS)
 		uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
 
-	wake_up_interruptible(&up->port.state->delta_msr_wait);
+	wake_up_interruptible(&up->port.state->port.delta_msr_wait);
 }
 
 /*
drivers/serial/sa1100.c +1 -1
index 61ef3ae..7f5e268 100644
@@ -117,7 +117,7 @@ static void sa1100_mctrl_check(struct sa1100_port *sport)
 	if (changed & TIOCM_CTS)
 		uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
 
-	wake_up_interruptible(&sport->port.state->delta_msr_wait);
+	wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
 }
 
 /*
drivers/serial/sb1250-duart.c +1 -1
index fa5f303..a2f2b32 100644
@@ -440,7 +440,7 @@ static void sbd_status_handle(struct sbd_port *sport)
 
 	if (delta & ((M_DUART_IN_PIN2_VAL | M_DUART_IN_PIN0_VAL) <<
 		     S_DUART_IN_PIN_CHNG))
-		wake_up_interruptible(&uport->state->delta_msr_wait);
+		wake_up_interruptible(&uport->state->port.delta_msr_wait);
 }
 
 static irqreturn_t sbd_interrupt(int irq, void *dev_id)
drivers/serial/serial_core.c +11 -7
index 9d42e57..e16d153 100644
@@ -215,7 +215,8 @@ static int uart_startup(struct uart_state *state, int init_hw)
 static void uart_shutdown(struct uart_state *state)
 {
 	struct uart_port *uport = state->uart_port;
-	struct tty_struct *tty = state->port.tty;
+	struct tty_port *port = &state->port;
+	struct tty_struct *tty = port->tty;
 
 	/*
 	 * Set the TTY IO error marker
@@ -223,7 +224,7 @@ static void uart_shutdown(struct uart_state *state)
 	if (tty)
 		set_bit(TTY_IO_ERROR, &tty->flags);
 
-	if (test_and_clear_bit(ASYNCB_INITIALIZED, &state->port.flags)) {
+	if (test_and_clear_bit(ASYNCB_INITIALIZED, &port->flags)) {
 		/*
 		 * Turn off DTR and RTS early.
 		 */
@@ -237,7 +238,7 @@ static void uart_shutdown(struct uart_state *state)
 		 * any outstanding file descriptors should be pointing at
 		 * hung_up_tty_fops now.
 		 */
-		wake_up_interruptible(&state->delta_msr_wait);
+		wake_up_interruptible(&port->delta_msr_wait);
 
 		/*
 		 * Free the IRQ and disable the port.
@@ -1004,11 +1005,15 @@ static int uart_do_autoconfig(struct uart_state *state)
  * - mask passed in arg for lines of interest
  *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
  * Caller should use TIOCGICOUNT to see which one it was
+ *
+ * FIXME: This wants extracting into a common all driver implementation
+ * of TIOCMWAIT using tty_port.
  */
 static int
 uart_wait_modem_status(struct uart_state *state, unsigned long arg)
 {
 	struct uart_port *uport = state->uart_port;
+	struct tty_port *port = &state->port;
 	DECLARE_WAITQUEUE(wait, current);
 	struct uart_icount cprev, cnow;
 	int ret;
@@ -1025,7 +1030,7 @@ uart_wait_modem_status(struct uart_state *state, unsigned long arg)
 	uport->ops->enable_ms(uport);
 	spin_unlock_irq(&uport->lock);
 
-	add_wait_queue(&state->delta_msr_wait, &wait);
+	add_wait_queue(&port->delta_msr_wait, &wait);
 	for (;;) {
 		spin_lock_irq(&uport->lock);
 		memcpy(&cnow, &uport->icount, sizeof(struct uart_icount));
@@ -1053,7 +1058,7 @@ uart_wait_modem_status(struct uart_state *state, unsigned long arg)
 	}
 
 	current->state = TASK_RUNNING;
-	remove_wait_queue(&state->delta_msr_wait, &wait);
+	remove_wait_queue(&port->delta_msr_wait, &wait);
 
 	return ret;
 }
@@ -1430,7 +1435,7 @@ static void uart_hangup(struct tty_struct *tty)
 		clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
 		port->tty = NULL;
 		wake_up_interruptible(&port->open_wait);
-		wake_up_interruptible(&state->delta_msr_wait);
+		wake_up_interruptible(&port->delta_msr_wait);
 	}
 	mutex_unlock(&port->mutex);
 }
@@ -2378,7 +2383,6 @@ int uart_register_driver(struct uart_driver *drv)
 		tty_port_init(port);
 		port->close_delay     = 500;	/* .5 seconds */
 		port->closing_wait    = 30000;	/* 30 seconds */
-		init_waitqueue_head(&state->delta_msr_wait);
 		tasklet_init(&state->tlet, uart_tasklet_action,
 			     (unsigned long)state);
 	}
drivers/serial/serial_ks8695.c +1 -1
index 4560b2e..2e71bbc 100644
@@ -266,7 +266,7 @@ static irqreturn_t ks8695uart_modem_status(int irq, void *dev_id)
 	if (status & URMS_URTERI)
 		port->icount.rng++;
 
-	wake_up_interruptible(&port->state->delta_msr_wait);
+	wake_up_interruptible(&port->state->port.delta_msr_wait);
 
 	return IRQ_HANDLED;
 }
drivers/serial/serial_lh7a40x.c +1 -1
index 057fc5e..ea74470 100644
@@ -241,7 +241,7 @@ static void lh7a40xuart_modem_status (struct uart_port* port)
 	if (delta & CTS)
 		uart_handle_cts_change (port, status & CTS);
 
-	wake_up_interruptible (&port->state->delta_msr_wait);
+	wake_up_interruptible (&port->state->port.delta_msr_wait);
 }
 
 static irqreturn_t lh7a40xuart_int (int irq, void* dev_id)
drivers/serial/sunsab.c +1 -1
index 7c4f2fe..d1ad341 100644
@@ -297,7 +297,7 @@ static void check_status(struct uart_sunsab_port *up,
 		up->port.icount.dsr++;
 	}
 
-	wake_up_interruptible(&up->port.state->delta_msr_wait);
+	wake_up_interruptible(&up->port.state->port.delta_msr_wait);
 }
 
 static irqreturn_t sunsab_interrupt(int irq, void *dev_id)
drivers/serial/sunsu.c +1 -1
index 5a32365..68d262b 100644
@@ -441,7 +441,7 @@ static void check_modem_status(struct uart_sunsu_port *up)
 	if (status & UART_MSR_DCTS)
 		uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
 
-	wake_up_interruptible(&up->port.state->delta_msr_wait);
+	wake_up_interruptible(&up->port.state->port.delta_msr_wait);
 }
 
 static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id)
drivers/serial/sunzilog.c +1 -1
index 055034d..ef693ae 100644
@@ -451,7 +451,7 @@ static void sunzilog_status_handle(struct uart_sunzilog_port *up,
 			uart_handle_cts_change(&up->port,
 					       (status & CTS));
 
-		wake_up_interruptible(&up->port.state->delta_msr_wait);
+		wake_up_interruptible(&up->port.state->port.delta_msr_wait);
 	}
 
 	up->prev_status = status;
drivers/serial/timbuart.c +1 -1
index 3d40be6..34b31da 100644
@@ -231,7 +231,7 @@ static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier)
 		iowrite32(CTS_DELTA, port->membase + TIMBUART_ISR);
 		cts = timbuart_get_mctrl(port);
 		uart_handle_cts_change(port, cts & TIOCM_CTS);
-		wake_up_interruptible(&port->state->delta_msr_wait);
+		wake_up_interruptible(&port->state->port.delta_msr_wait);
 	}
 
 	*ier |= CTS_DELTA;
drivers/serial/vr41xx_siu.c +1 -1
index cf4410e..3beb6ab 100644
@@ -386,7 +386,7 @@ static inline void check_modem_status(struct uart_port *port)
 	if (msr & UART_MSR_DCTS)
 		uart_handle_cts_change(port, msr & UART_MSR_CTS);
 
-	wake_up_interruptible(&port->state->delta_msr_wait);
+	wake_up_interruptible(&port->state->port.delta_msr_wait);
 }
 
 static inline void transmit_chars(struct uart_port *port)
drivers/serial/zs.c +1 -1
index b9c9fb9..1a7fd3e 100644
@@ -686,7 +686,7 @@ static void zs_status_handle(struct zs_port *zport, struct zs_port *zport_a)
 			uport->icount.rng++;
 
 		if (delta)
-			wake_up_interruptible(&uport->state->delta_msr_wait);
+			wake_up_interruptible(&uport->state->port.delta_msr_wait);
 
 		spin_lock(&scc->zlock);
 	}
include/linux/cyclades.h +0 -1
index bbebef7..a5049ea 100644
@@ -578,7 +578,6 @@ struct cyclades_port {
 	struct cyclades_idle_stats	idle_stats;
 	struct cyclades_icount	icount;
 	struct completion       shutdown_wait;
-	wait_queue_head_t       delta_msr_wait;
 	int throttle;
 };
 
include/linux/hayesesp.h +0 -1
index 940aeb5..92b08cf 100644
@@ -96,7 +96,6 @@ struct esp_struct {
 	int			xmit_head;
 	int			xmit_tail;
 	int			xmit_cnt;
-	wait_queue_head_t	delta_msr_wait;
 	wait_queue_head_t	break_wait;
 	struct async_icount	icount;	/* kernel counters for the 4 input interrupts */
 	struct hayes_esp_config config; /* port configuration */
include/linux/serial_core.h +0 -1
index 27767ea..bcafecd 100644
@@ -349,7 +349,6 @@ struct uart_state {
 	struct circ_buf		xmit;
 
 	struct tasklet_struct	tlet;
-	wait_queue_head_t	delta_msr_wait;
 	struct uart_port	*uart_port;
 };
 
include/linux/tty.h +1 -0
index 9fdc3d8..0daa8a7 100644
@@ -203,6 +203,7 @@ struct tty_port {
 	int			count;		/* Usage count */
 	wait_queue_head_t	open_wait;	/* Open waiters */
 	wait_queue_head_t	close_wait;	/* Close waiters */
+	wait_queue_head_t	delta_msr_wait;	/* Modem status change */
 	unsigned long		flags;		/* TTY flags ASY_*/
 	struct mutex		mutex;		/* Locking */
 	unsigned char		*xmit_buf;	/* Optional buffer */
Signature · 1 line
1.6.4.2
#56 lore raw

PATCH 54/79 serial: move port users helper

In reply to Greg KH

From: Alan Cox <[email protected]>

This little helper is now tty_port specific and useful generally so move it

---
 drivers/serial/serial_core.c |    6 ++----
 include/linux/tty.h          |    5 +++++
 2 files changed, 7 insertions(+), 4 deletions(-)
drivers/serial/serial_core.c +2 -4
index e16d153..3c45a8d 100644
@@ -52,8 +52,6 @@ static struct lock_class_key port_lock_key;
 
 #define HIGH_BITS_OFFSET	((sizeof(long)-sizeof(int))*8)
 
-#define uart_users(state)	((state)->port.count + (state)->port.blocked_open)
-
 #ifdef CONFIG_SERIAL_CORE_CONSOLE
 #define uart_console(port)	((port)->cons && (port)->cons->index == (port)->line)
 #else
@@ -758,7 +756,7 @@ static int uart_set_info(struct uart_state *state,
 		/*
 		 * Make sure that we are the sole user of this port.
 		 */
-		if (uart_users(state) > 1)
+		if (tty_port_users(port) > 1)
 			goto exit;
 
 		/*
@@ -974,7 +972,7 @@ static int uart_do_autoconfig(struct uart_state *state)
 		return -ERESTARTSYS;
 
 	ret = -EBUSY;
-	if (uart_users(state) == 1) {
+	if (tty_port_users(port) == 1) {
 		uart_shutdown(state);
 
 		/*
include/linux/tty.h +5 -0
index 0daa8a7..a0e0330 100644
@@ -467,6 +467,11 @@ extern int tty_port_close_start(struct tty_port *port,
 extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty);
 extern void tty_port_close(struct tty_port *port,
 				struct tty_struct *tty, struct file *filp);
+extern inline int tty_port_users(struct tty_port *port)
+{
+	return port->count + port->blocked_open;
+}
+
 extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc);
 extern int tty_unregister_ldisc(int disc);
 extern int tty_set_ldisc(struct tty_struct *tty, int ldisc);
Signature · 1 line
1.6.4.2
#57 lore raw

PATCH 55/79 serial: kill USF_CLOSING_* definitions

In reply to Greg KH

From: Alan Cox <[email protected]>

The serial layer for some reason uses different defines for the special case close delays and then conditionally switches to/from the normal ones in the ioctls.

Remove this rather pointless abstraction

---
 drivers/serial/serial_core.c |    6 +++---
 include/linux/serial_core.h  |    3 ---
 2 files changed, 3 insertions(+), 6 deletions(-)
drivers/serial/serial_core.c +3 -3
index 3c45a8d..69c4e20 100644
@@ -652,7 +652,7 @@ static int uart_get_info(struct uart_state *state,
 	tmp.xmit_fifo_size  = uport->fifosize;
 	tmp.baud_base	    = uport->uartclk / 16;
 	tmp.close_delay	    = port->close_delay / 10;
-	tmp.closing_wait    = port->closing_wait == USF_CLOSING_WAIT_NONE ?
+	tmp.closing_wait    = port->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
 				ASYNC_CLOSING_WAIT_NONE :
 				port->closing_wait / 10;
 	tmp.custom_divisor  = uport->custom_divisor;
@@ -690,7 +690,7 @@ static int uart_set_info(struct uart_state *state,
 	new_serial.irq = irq_canonicalize(new_serial.irq);
 	close_delay = new_serial.close_delay * 10;
 	closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
-			USF_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
+			ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
 
 	/*
 	 * This semaphore protects port->count.  It is also
@@ -1307,7 +1307,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 	 */
 	tty->closing = 1;
 
-	if (port->closing_wait != USF_CLOSING_WAIT_NONE)
+	if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
 		tty_wait_until_sent(tty, msecs_to_jiffies(port->closing_wait));
 
 	/*
include/linux/serial_core.h +0 -3
index bcafecd..d58e460 100644
@@ -342,9 +342,6 @@ struct uart_port {
 struct uart_state {
 	struct tty_port		port;
 
-#define USF_CLOSING_WAIT_INF	(0)
-#define USF_CLOSING_WAIT_NONE	(~0U)
-
 	int			pm_state;
 	struct circ_buf		xmit;
 
Signature · 1 line
1.6.4.2
#58 lore raw

PATCH 56/79 serial: introduce tty krefs

In reply to Greg KH

From: Alan Cox <[email protected]>

Initially just use the helper and thus krefs when we set and clear the port values.

---
 drivers/serial/serial_core.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)
drivers/serial/serial_core.c +3 -3
index 69c4e20..3fd0134 100644
@@ -1333,7 +1333,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 	tty_ldisc_flush(tty);
 
 	tty->closing = 0;
-	port->tty = NULL;
+	tty_port_tty_set(port, NULL);
 
 	if (port->blocked_open) {
 		if (port->close_delay)
@@ -1431,7 +1431,7 @@ static void uart_hangup(struct tty_struct *tty)
 		uart_shutdown(state);
 		port->count = 0;
 		clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
-		port->tty = NULL;
+		tty_port_tty_set(port, NULL);
 		wake_up_interruptible(&port->open_wait);
 		wake_up_interruptible(&port->delta_msr_wait);
 	}
@@ -1639,7 +1639,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
 	state->uart_port->state = state;
 	tty->low_latency = (state->uart_port->flags & UPF_LOW_LATENCY) ? 1 : 0;
 	tty->alt_speed = 0;
-	port->tty = tty;
+	tty_port_tty_set(port, tty);
 
 	/*
 	 * If the port is in the middle of closing, bail out now.
Signature · 1 line
1.6.4.2
#59 lore raw

PATCH 57/79 Set proper console speed on resume if console suspend is disabled

In reply to Greg KH

From: Deepak Saxena <[email protected]>

Commit b5b82df6, from May 2007, breaks no_console_suspend on the OLPC XO laptop. Basically what happens is that upon returning from resume, serial8250_resume_port() will reconfigure the port for high speed mode and all console output will be garbled, making debug of the resume path painful. This patch modifies uart_resume_port() to reset the port to the state it was in before we suspended.

Original patch by Marcelo Tosatti

Second patch by Deepak then reworked by Alan to fit with the tty changes before it got submitted. Also fixed the console path to set c_i/ospeed as some drivers require the termios fields are valid

---
 drivers/serial/serial_core.c |   32 ++++++++++++++++++--------------
 1 files changed, 18 insertions(+), 14 deletions(-)
drivers/serial/serial_core.c +18 -14
index 3fd0134..2514d00 100644
@@ -2068,11 +2068,29 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 	struct tty_port *port = &state->port;
 	struct device *tty_dev;
 	struct uart_match match = {uport, drv};
+	struct ktermios termios;
 
 	mutex_lock(&port->mutex);
 
 	if (!console_suspend_enabled && uart_console(uport)) {
 		/* no need to resume serial console, it wasn't suspended */
+		/*
+		 * First try to use the console cflag setting.
+		 */
+		memset(&termios, 0, sizeof(struct ktermios));
+		termios.c_cflag = uport->cons->cflag;
+		/*
+		 * If that's unset, use the tty termios setting.
+		 */
+		if (termios.c_cflag == 0)
+			termios = *state->port.tty->termios;
+		else {
+			termios.c_ispeed = termios.c_ospeed =
+				tty_termios_input_baud_rate(&termios);
+			termios.c_ispeed = termios.c_ospeed =
+				tty_termios_baud_rate(&termios);
+		}
+		uport->ops->set_termios(uport, &termios, NULL);
 		mutex_unlock(&port->mutex);
 		return 0;
 	}
@@ -2089,20 +2107,6 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 	 * Re-enable the console device after suspending.
 	 */
 	if (uart_console(uport)) {
-		struct ktermios termios;
-
-		/*
-		 * First try to use the console cflag setting.
-		 */
-		memset(&termios, 0, sizeof(struct ktermios));
-		termios.c_cflag = uport->cons->cflag;
-
-		/*
-		 * If that's unset, use the tty termios setting.
-		 */
-		if (port->tty && termios.c_cflag == 0)
-			termios = *port->tty->termios;
-
 		uart_change_pm(state, 0);
 		uport->ops->set_termios(uport, &termios, NULL);
 		console_start(uport->cons);
Signature · 1 line
1.6.4.2
#60 lore raw

PATCH 58/79 tty: USB serial termios bits

In reply to Greg KH

From: Alan Cox <[email protected]>

Various drivers have hacks to mangle termios structures. This stems from the fact there is no nice setup hook for configuring the termios settings when the port is created

---
 drivers/char/tty_io.c            |    1 +
 drivers/usb/serial/ark3116.c     |   46 +++++++++----------------------------
 drivers/usb/serial/cypress_m8.c  |   12 ++-------
 drivers/usb/serial/empeg.c       |   12 ++-------
 drivers/usb/serial/iuu_phoenix.c |   31 +++++++++++--------------
 drivers/usb/serial/kobil_sct.c   |   22 +++++++++---------
 drivers/usb/serial/oti6858.c     |   21 ++++++++---------
 drivers/usb/serial/spcp8x5.c     |   21 ++++++++---------
 drivers/usb/serial/usb-serial.c  |   38 ++++++++++++++++++++++++++++++-
 drivers/usb/serial/whiteheat.c   |    6 ++--
 include/linux/usb/serial.h       |    3 ++
 11 files changed, 106 insertions(+), 107 deletions(-)
drivers/char/tty_io.c +1 -0
index 385cca7..05f443c 100644
@@ -1184,6 +1184,7 @@ int tty_init_termios(struct tty_struct *tty)
 	tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(tty_init_termios);
 
 /**
  *	tty_driver_install_tty() - install a tty entry in the driver
drivers/usb/serial/ark3116.c +11 -35

89 lines not on this page · raw message

drivers/usb/serial/cypress_m8.c +3 -9
index df1adb9..e0a8b71 100644
@@ -657,15 +657,7 @@ static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port)
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* Set termios */
-	result = cypress_write(tty, port, NULL, 0);
-
-	if (result) {
-		dev_err(&port->dev,
-			"%s - failed setting the control lines - error %d\n",
-							__func__, result);
-		return result;
-	} else
-		dbg("%s - success setting the control lines", __func__);
+	cypress_send(port);
 
 	if (tty)
 		cypress_set_termios(tty, port, &priv->tmp_termios);
@@ -1003,6 +995,8 @@ static void cypress_set_termios(struct tty_struct *tty,
 	dbg("%s - port %d", __func__, port->number);
 
 	spin_lock_irqsave(&priv->lock, flags);
+	/* We can't clean this one up as we don't know the device type
+	   early enough */
 	if (!priv->termios_initialized) {
 		if (priv->chiptype == CT_EARTHMATE) {
 			*(tty->termios) = tty_std_termios;
drivers/usb/serial/empeg.c +3 -9
index da559a7..33c9e9c 100644
@@ -89,8 +89,7 @@ static int  empeg_chars_in_buffer(struct tty_struct *tty);
 static void empeg_throttle(struct tty_struct *tty);
 static void empeg_unthrottle(struct tty_struct *tty);
 static int  empeg_startup(struct usb_serial *serial);
-static void empeg_set_termios(struct tty_struct *tty,
-		struct usb_serial_port *port, struct ktermios *old_termios);
+static void empeg_init_termios(struct tty_struct *tty);
 static void empeg_write_bulk_callback(struct urb *urb);
 static void empeg_read_bulk_callback(struct urb *urb);
 
@@ -122,7 +121,7 @@ static struct usb_serial_driver empeg_device = {
 	.throttle =		empeg_throttle,
 	.unthrottle =		empeg_unthrottle,
 	.attach =		empeg_startup,
-	.set_termios =		empeg_set_termios,
+	.init_termios =		empeg_init_termios,
 	.write =		empeg_write,
 	.write_room =		empeg_write_room,
 	.chars_in_buffer =	empeg_chars_in_buffer,
@@ -148,9 +147,6 @@ static int empeg_open(struct tty_struct *tty,struct usb_serial_port *port)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/* Force default termio settings */
-	empeg_set_termios(tty, port, NULL);
-
 	bytes_in = 0;
 	bytes_out = 0;
 
@@ -423,11 +419,9 @@ static int  empeg_startup(struct usb_serial *serial)
 }
 
 
-static void empeg_set_termios(struct tty_struct *tty,
-		struct usb_serial_port *port, struct ktermios *old_termios)
+static void empeg_init_termios(struct tty_struct *tty)
 {
 	struct ktermios *termios = tty->termios;
-	dbg("%s - port %d", __func__, port->number);
 
 	/*
 	 * The empeg-car player wants these particular tty settings.
drivers/usb/serial/iuu_phoenix.c +14 -17
index f3f9be0..6138c1c 100644
@@ -71,7 +71,6 @@ struct iuu_private {
 	spinlock_t lock;	/* store irq state */
 	wait_queue_head_t delta_msr_wait;
 	u8 line_status;
-	u8 termios_initialized;
 	int tiostatus;		/* store IUART SIGNAL for tiocmget call */
 	u8 reset;		/* if 1 reset is needed */
 	int poll;		/* number of poll */
@@ -1018,13 +1017,24 @@ static void iuu_close(struct usb_serial_port *port)
 	}
 }
 
+static void iuu_init_termios(struct tty_struct *tty)
+{
+	*(tty->termios) = tty_std_termios;
+	tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
+				| TIOCM_CTS | CSTOPB | PARENB;
+	tty->termios->c_ispeed = 9600;
+	tty->termios->c_ospeed = 9600;
+	tty->termios->c_lflag = 0;
+	tty->termios->c_oflag = 0;
+	tty->termios->c_iflag = 0;
+}
+
 static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	u8 *buf;
 	int result;
 	u32 actual;
-	unsigned long flags;
 	struct iuu_private *priv = usb_get_serial_port_data(port);
 
 	dbg("%s -  port %d", __func__, port->number);
@@ -1063,21 +1073,7 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
 			  port->bulk_in_buffer, 512,
 			  NULL, NULL);
 
-	/* set the termios structure */
-	spin_lock_irqsave(&priv->lock, flags);
-	if (tty && !priv->termios_initialized) {
-		*(tty->termios) = tty_std_termios;
-		tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
-					| TIOCM_CTS | CSTOPB | PARENB;
-		tty->termios->c_ispeed = 9600;
-		tty->termios->c_ospeed = 9600;
-		tty->termios->c_lflag = 0;
-		tty->termios->c_oflag = 0;
-		tty->termios->c_iflag = 0;
-		priv->termios_initialized = 1;
-		priv->poll = 0;
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
+	priv->poll = 0;
 
 	/* initialize writebuf */
 #define FISH(a, b, c, d) do { \
@@ -1200,6 +1196,7 @@ static struct usb_serial_driver iuu_device = {
 	.tiocmget = iuu_tiocmget,
 	.tiocmset = iuu_tiocmset,
 	.set_termios = iuu_set_termios,
+	.init_termios = iuu_init_termios,
 	.attach = iuu_startup,
 	.release = iuu_release,
 };
drivers/usb/serial/kobil_sct.c +11 -11
index 9790157..45ea694 100644
@@ -84,7 +84,7 @@ static void kobil_read_int_callback(struct urb *urb);
 static void kobil_write_callback(struct urb *purb);
 static void kobil_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
-
+static void kobil_init_termios(struct tty_struct *tty);
 
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_ADAPTER_B_PRODUCT_ID) },
@@ -119,6 +119,7 @@ static struct usb_serial_driver kobil_device = {
 	.release =		kobil_release,
 	.ioctl =		kobil_ioctl,
 	.set_termios =		kobil_set_termios,
+	.init_termios =		kobil_init_termios,
 	.tiocmget =		kobil_tiocmget,
 	.tiocmset =		kobil_tiocmset,
 	.open =			kobil_open,
@@ -209,6 +210,15 @@ static void kobil_release(struct usb_serial *serial)
 		kfree(usb_get_serial_port_data(serial->port[i]));
 }
 
+static void kobil_init_termios(struct tty_struct *tty)
+{
+	/* Default to echo off and other sane device settings */
+	tty->termios->c_lflag = 0;
+	tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE);
+	tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
+	/* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */
+	tty->termios->c_oflag &= ~ONLCR;
+}
 
 static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
@@ -224,16 +234,6 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
 	/* someone sets the dev to 0 if the close method has been called */
 	port->interrupt_in_urb->dev = port->serial->dev;
 
-	if (tty) {
-
-		/* Default to echo off and other sane device settings */
-		tty->termios->c_lflag = 0;
-		tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN |
-								 XCASE);
-		tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
-		/* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */
-		tty->termios->c_oflag &= ~ONLCR;
-	}
 	/* allocate memory for transfer buffer */
 	transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
 	if (!transfer_buffer)
drivers/usb/serial/oti6858.c +10 -11
index e90f88a..0f4a70c 100644
@@ -145,6 +145,7 @@ static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void oti6858_close(struct usb_serial_port *port);
 static void oti6858_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
+static void oti6858_init_termios(struct tty_struct *tty);
 static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
 			unsigned int cmd, unsigned long arg);
 static void oti6858_read_int_callback(struct urb *urb);
@@ -185,6 +186,7 @@ static struct usb_serial_driver oti6858_device = {
 	.write =		oti6858_write,
 	.ioctl =		oti6858_ioctl,
 	.set_termios =		oti6858_set_termios,
+	.init_termios = 	oti6858_init_termios,
 	.tiocmget =		oti6858_tiocmget,
 	.tiocmset =		oti6858_tiocmset,
 	.read_bulk_callback =	oti6858_read_bulk_callback,
@@ -205,7 +207,6 @@ struct oti6858_private {
 	struct {
 		u8 read_urb_in_use;
 		u8 write_urb_in_use;
-		u8 termios_initialized;
 	} flags;
 	struct delayed_work delayed_write_work;
 
@@ -446,6 +447,14 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty)
 	return chars;
 }
 
+static void oti6858_init_termios(struct tty_struct *tty)
+{
+	*(tty->termios) = tty_std_termios;
+	tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
+	tty->termios->c_ispeed = 38400;
+	tty->termios->c_ospeed = 38400;
+}
+
 static void oti6858_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
@@ -463,16 +472,6 @@ static void oti6858_set_termios(struct tty_struct *tty,
 		return;
 	}
 
-	spin_lock_irqsave(&priv->lock, flags);
-	if (!priv->flags.termios_initialized) {
-		*(tty->termios) = tty_std_termios;
-		tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
-		tty->termios->c_ispeed = 38400;
-		tty->termios->c_ospeed = 38400;
-		priv->flags.termios_initialized = 1;
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	cflag = tty->termios->c_cflag;
 
 	spin_lock_irqsave(&priv->lock, flags);
drivers/usb/serial/spcp8x5.c +10 -11
index 8b312a0..61e7c40 100644
@@ -299,7 +299,6 @@ struct spcp8x5_private {
 	wait_queue_head_t	delta_msr_wait;
 	u8 			line_control;
 	u8 			line_status;
-	u8 			termios_initialized;
 };
 
 /* desc : when device plug in,this function would be called.
@@ -498,6 +497,15 @@ static void spcp8x5_close(struct usb_serial_port *port)
 		dev_dbg(&port->dev, "usb_unlink_urb(read_urb) = %d\n", result);
 }
 
+static void spcp8x5_init_termios(struct tty_struct *tty)
+{
+	/* for the 1st time call this function */
+	*(tty->termios) = tty_std_termios;
+	tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
+	tty->termios->c_ispeed = 115200;
+	tty->termios->c_ospeed = 115200;
+}
+
 /* set the serial param for transfer. we should check if we really need to
  * transfer. if we set flow control we should do this too. */
 static void spcp8x5_set_termios(struct tty_struct *tty,
@@ -514,16 +522,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 	int i;
 	u8 control;
 
-	/* for the 1st time call this function */
-	spin_lock_irqsave(&priv->lock, flags);
-	if (!priv->termios_initialized) {
-		*(tty->termios) = tty_std_termios;
-		tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
-		tty->termios->c_ispeed = 115200;
-		tty->termios->c_ospeed = 115200;
-		priv->termios_initialized = 1;
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* check that they really want us to change something */
 	if (!tty_termios_hw_change(tty->termios, old_termios))
@@ -1008,6 +1006,7 @@ static struct usb_serial_driver spcp8x5_device = {
 	.carrier_raised		= spcp8x5_carrier_raised,
 	.write 			= spcp8x5_write,
 	.set_termios 		= spcp8x5_set_termios,
+	.init_termios		= spcp8x5_init_termios,
 	.ioctl 			= spcp8x5_ioctl,
 	.tiocmget 		= spcp8x5_tiocmget,
 	.tiocmset 		= spcp8x5_tiocmset,
drivers/usb/serial/usb-serial.c +37 -1
index 3dda684..80c1f4d 100644
@@ -721,6 +721,41 @@ static const struct tty_port_operations serial_port_ops = {
 	.dtr_rts = serial_dtr_rts,
 };
 
+/**
+ *	serial_install		-	install tty
+ *	@driver: the driver (USB in our case)
+ *	@tty: the tty being created
+ *
+ *	Create the termios objects for this tty. We use the default USB
+ *	serial ones but permit them to be overriddenby serial->type->termios.
+ *	This lets us remove all the ugly hackery
+ */
+
+static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+	int idx = tty->index;
+	struct usb_serial *serial;
+	int retval;
+
+	/* If the termios setup has yet to be done */
+	if (tty->driver->termios[idx] == NULL) {
+		/* perform the standard setup */
+		retval = tty_init_termios(tty);
+		if (retval)
+			return retval;
+		/* allow the driver to update it */
+		serial = usb_serial_get_by_index(tty->index);
+		if (serial->type->init_termios)
+			serial->type->init_termios(tty);
+		usb_serial_put(serial);
+	}
+	/* Final install (we use the default method) */
+	tty_driver_kref_get(driver);
+	tty->count++;
+	driver->ttys[idx] = tty;
+	return 0;
+}
+
 int usb_serial_probe(struct usb_interface *interface,
 			       const struct usb_device_id *id)
 {
@@ -1228,7 +1263,8 @@ static const struct tty_operations serial_ops = {
 	.chars_in_buffer =	serial_chars_in_buffer,
 	.tiocmget =		serial_tiocmget,
 	.tiocmset =		serial_tiocmset,
-	.shutdown =		serial_do_free,
+	.shutdown = 		serial_do_free,
+	.install = 		serial_install,
 	.proc_fops =		&serial_proc_fops,
 };
 
drivers/usb/serial/whiteheat.c +3 -3
index 81f2ae5..62424ee 100644
@@ -259,7 +259,7 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command,
 						__u8 *data, __u8 datasize);
 static int firm_open(struct usb_serial_port *port);
 static int firm_close(struct usb_serial_port *port);
-static int firm_setup_port(struct tty_struct *tty);
+static void firm_setup_port(struct tty_struct *tty);
 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff);
 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff);
 static int firm_set_break(struct usb_serial_port *port, __u8 onoff);
@@ -1210,7 +1210,7 @@ static int firm_close(struct usb_serial_port *port)
 }
 
 
-static int firm_setup_port(struct tty_struct *tty)
+static void firm_setup_port(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_port_settings port_settings;
@@ -1285,7 +1285,7 @@ static int firm_setup_port(struct tty_struct *tty)
 	port_settings.lloop = 0;
 
 	/* now send the message to the device */
-	return firm_send_command(port, WHITEHEAT_SETUP_PORT,
+	firm_send_command(port, WHITEHEAT_SETUP_PORT,
 			(__u8 *)&port_settings, sizeof(port_settings));
 }
 
include/linux/usb/serial.h +3 -0
index 1cbaf4a..7b85e32 100644
@@ -260,6 +260,9 @@ struct usb_serial_driver {
 	   be an attached tty at this point */
 	void (*dtr_rts)(struct usb_serial_port *port, int on);
 	int  (*carrier_raised)(struct usb_serial_port *port);
+	/* Called by the usb serial hooks to allow the user to rework the
+	   termios state */
+	void (*init_termios)(struct tty_struct *tty);
 	/* USB events */
 	void (*read_int_callback)(struct urb *urb);
 	void (*write_int_callback)(struct urb *urb);
Signature · 1 line
1.6.4.2
#61 lore raw

PATCH 59/79 n_tty: honor opost flag for echoes

In reply to Greg KH

From: Joe Peterson <[email protected]>

Fixes the following bug:

      http://bugs.linuxbase.org/show_bug.cgi?id=2692

Causes processing of echoed characters (output from the echo buffer) to honor the O_OPOST flag, which is consistent with the old behavior.

Note that this and the next patch ("n_tty: move echoctl check and clean up logic") were verified together by the bug reporters, and the test now passes.

---
 drivers/char/n_tty.c |   33 ++++++++++++++++++++++-----------
 1 files changed, 22 insertions(+), 11 deletions(-)
drivers/char/n_tty.c +22 -11
index 4e28b35..e6eeeb2 100644
@@ -272,7 +272,8 @@ static inline int is_continuation(unsigned char c, struct tty_struct *tty)
  *
  *	This is a helper function that handles one output character
  *	(including special characters like TAB, CR, LF, etc.),
- *	putting the results in the tty driver's write buffer.
+ *	doing OPOST processing and putting the results in the
+ *	tty driver's write buffer.
  *
  *	Note that Linux currently ignores TABDLY, CRDLY, VTDLY, FFDLY
  *	and NLDLY.  They simply aren't relevant in the world today.
@@ -350,8 +351,9 @@ static int do_output_char(unsigned char c, struct tty_struct *tty, int space)
  *	@c: character (or partial unicode symbol)
  *	@tty: terminal device
  *
- *	Perform OPOST processing.  Returns -1 when the output device is
- *	full and the character must be retried.
+ *	Output one character with OPOST processing.
+ *	Returns -1 when the output device is full and the character
+ *	must be retried.
  *
  *	Locking: output_lock to protect column state and space left
  *		 (also, this is called from n_tty_write under the
@@ -377,8 +379,11 @@ static int process_output(unsigned char c, struct tty_struct *tty)
 /**
  *	process_output_block		-	block post processor
  *	@tty: terminal device
- *	@inbuf: user buffer
- *	@nr: number of bytes
+ *	@buf: character buffer
+ *	@nr: number of bytes to output
+ *
+ *	Output a block of characters with OPOST processing.
+ *	Returns the number of characters output.
  *
  *	This path is used to speed up block console writes, among other
  *	things when processing blocks of output data. It handles only
@@ -605,12 +610,18 @@ static void process_echoes(struct tty_struct *tty)
 			if (no_space_left)
 				break;
 		} else {
-			int retval;
-
-			retval = do_output_char(c, tty, space);
-			if (retval < 0)
-				break;
-			space -= retval;
+			if (O_OPOST(tty) &&
+			    !(test_bit(TTY_HW_COOK_OUT, &tty->flags))) {
+				int retval = do_output_char(c, tty, space);
+				if (retval < 0)
+					break;
+				space -= retval;
+			} else {
+				if (!space)
+					break;
+				tty_put_char(tty, c);
+				space -= 1;
+			}
 			cp += 1;
 			nr -= 1;
 		}
Signature · 1 line
1.6.4.2
#62 lore raw

PATCH 60/79 n_tty: move echoctl check and clean up logic

In reply to Greg KH

From: Joe Peterson <[email protected]>

Check L_ECHOCTL before insertting a character in the echo buffer (rather than as the buffer is processed), to be more consistent with when all other L_ flags are checked. Also cleaned up the related logic.

Note that this and the previous patch ("n_tty: honor opost flag for echoes") were verified together by the reporters of the bug that patch addresses
(http://bugs.linuxbase.org/show_bug.cgi?id=2692), and the test now passes.

---
 drivers/char/n_tty.c |   46 ++++++++++++++++++----------------------------
 1 files changed, 18 insertions(+), 28 deletions(-)
drivers/char/n_tty.c +18 -28
index e6eeeb2..2e50f4d 100644
@@ -576,33 +576,23 @@ static void process_echoes(struct tty_struct *tty)
 				break;
 
 			default:
-				if (iscntrl(op)) {
-					if (L_ECHOCTL(tty)) {
-						/*
-						 * Ensure there is enough space
-						 * for the whole ctrl pair.
-						 */
-						if (space < 2) {
-							no_space_left = 1;
-							break;
-						}
-						tty_put_char(tty, '^');
-						tty_put_char(tty, op ^ 0100);
-						tty->column += 2;
-						space -= 2;
-					} else {
-						if (!space) {
-							no_space_left = 1;
-							break;
-						}
-						tty_put_char(tty, op);
-						space--;
-					}
-				}
 				/*
-				 * If above falls through, this was an
-				 * undefined op.
+				 * If the op is not a special byte code,
+				 * it is a ctrl char tagged to be echoed
+				 * as "^X" (where X is the letter
+				 * representing the control char).
+				 * Note that we must ensure there is
+				 * enough space for the whole ctrl pair.
+				 *
 				 */
+				if (space < 2) {
+					no_space_left = 1;
+					break;
+				}
+				tty_put_char(tty, '^');
+				tty_put_char(tty, op ^ 0100);
+				tty->column += 2;
+				space -= 2;
 				cp += 2;
 				nr -= 2;
 			}
@@ -809,8 +799,8 @@ static void echo_char_raw(unsigned char c, struct tty_struct *tty)
  *	Echo user input back onto the screen. This must be called only when
  *	L_ECHO(tty) is true. Called from the driver receive_buf path.
  *
- *	This variant tags control characters to be possibly echoed as
- *	as "^X" (where X is the letter representing the control char).
+ *	This variant tags control characters to be echoed as "^X"
+ *	(where X is the letter representing the control char).
  *
  *	Locking: echo_lock to protect the echo buffer
  */
@@ -823,7 +813,7 @@ static void echo_char(unsigned char c, struct tty_struct *tty)
 		add_echo_byte(ECHO_OP_START, tty);
 		add_echo_byte(ECHO_OP_START, tty);
 	} else {
-		if (iscntrl(c) && c != '\t')
+		if (L_ECHOCTL(tty) && iscntrl(c) && c != '\t')
 			add_echo_byte(ECHO_OP_START, tty);
 		add_echo_byte(c, tty);
 	}
Signature · 1 line
1.6.4.2
#63 lore raw

PATCH 61/79 tty: handle VT specific compat ioctls in vt driver

In reply to Greg KH

From: Arnd Bergmann <[email protected]>

The VT specific compat_ioctl handlers are the only ones in common code that require the BKL. Moving them into the vt driver lets us remove the BKL from the other handlers and cleans up the code.

---
 drivers/char/vt.c       |    3 +
 drivers/char/vt_ioctl.c |  203 +++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/tty.h     |    3 +
 3 files changed, 209 insertions(+), 0 deletions(-)
drivers/char/vt.c +3 -0
index 33214d9..5dfbfa7 100644
@@ -2910,6 +2910,9 @@ static const struct tty_operations con_ops = {
 	.flush_chars = con_flush_chars,
 	.chars_in_buffer = con_chars_in_buffer,
 	.ioctl = vt_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = vt_compat_ioctl,
+#endif
 	.stop = con_stop,
 	.start = con_start,
 	.throttle = con_throttle,
drivers/char/vt_ioctl.c +203 -0

215 lines not on this page · raw message

include/linux/tty.h +3 -0
index a0e0330..f0f43d0 100644
@@ -536,5 +536,8 @@ extern int pcxe_open(struct tty_struct *tty, struct file *filp);
 extern int vt_ioctl(struct tty_struct *tty, struct file *file,
 		    unsigned int cmd, unsigned long arg);
 
+extern long vt_compat_ioctl(struct tty_struct *tty, struct file * file,
+		     unsigned int cmd, unsigned long arg);
+
 #endif /* __KERNEL__ */
 #endif
Signature · 1 line
1.6.4.2
#64 lore raw

PATCH 62/79 tty: vt: use printk_once

In reply to Greg KH

From: Marcin Slusarz <[email protected]>

---
 drivers/char/tty_ioctl.c |    4 +---
 drivers/char/vt.c        |    6 +-----
 2 files changed, 2 insertions(+), 8 deletions(-)
drivers/char/tty_ioctl.c +1 -3
index ad6ba4e..8e67d5c 100644
@@ -393,9 +393,7 @@ void tty_termios_encode_baud_rate(struct ktermios *termios,
 		termios->c_cflag |= (BOTHER << IBSHIFT);
 #else
 	if (ifound == -1 || ofound == -1) {
-		static int warned;
-		if (!warned++)
-			printk(KERN_WARNING "tty: Unable to return correct "
+		printk_once(KERN_WARNING "tty: Unable to return correct "
 			  "speed data as your architecture needs updating.\n");
 	}
 #endif
drivers/char/vt.c +1 -5
index 5dfbfa7..0c80c68 100644
@@ -2129,11 +2129,7 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co
 	currcons = vc->vc_num;
 	if (!vc_cons_allocated(currcons)) {
 	    /* could this happen? */
-	    static int error = 0;
-	    if (!error) {
-		error = 1;
-		printk("con_write: tty %d not allocated\n", currcons+1);
-	    }
+		printk_once("con_write: tty %d not allocated\n", currcons+1);
 	    release_console_sem();
 	    return 0;
 	}
Signature · 1 line
1.6.4.2
#65 lore raw

PATCH 63/79 tty: Power: fix suspend vt regression

In reply to Greg KH

From: Jiri Slaby <[email protected]>

vt_waitactive no longer accepts console parameter as console-1 since commit "vt: add an event interface". It expects console number directly (as viewed by userspace -- counting from 1).

Fix a deadlock suspend regression by redefining adding one to vt in vt_move_to_console.

Cc Alan Cox <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc "Rafael J. Wysocki" <[email protected]>
---
 drivers/char/vt_ioctl.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/char/vt_ioctl.c +1 -1
index 30b5d12..29c651a 100644
@@ -1757,7 +1757,7 @@ int vt_move_to_console(unsigned int vt, int alloc)
 		return -EIO;
 	}
 	release_console_sem();
-	if (vt_waitactive(vt)) {
+	if (vt_waitactive(vt + 1)) {
 		pr_debug("Suspend: Can't switch VCs.");
 		return -EINTR;
 	}
Signature · 1 line
1.6.4.2