serial: fix htmldocs warnings
PATCH 1/1 serial: fix htmldocs warnings
Warning(/home/jaswinder/linux-2.6//include/linux/serial_core.h:485): No description found for parameter 'uport' Warning(/home/jaswinder/linux-2.6//include/linux/serial_core.h:485): Excess function parameter 'port' description in 'uart_handle_dcd_change' Warning(/home/jaswinder/linux-2.6//include/linux/serial_core.h:511): No description found for parameter 'uport' Warning(/home/jaswinder/linux-2.6//include/linux/serial_core.h:511): Excess function parameter 'port' description in 'uart_handle_cts_change' Warning(/home/jaswinder/linux-2.6//drivers/serial/serial_core.c:2437): No description found for parameter 'uport' Warning(/home/jaswinder/linux-2.6//drivers/serial/serial_core.c:2437): Excess function parameter 'port' description in 'uart_add_one_port' Warning(/home/jaswinder/linux-2.6//drivers/serial/serial_core.c:2509): No description found for parameter 'uport' Warning(/home/jaswinder/linux-2.6//drivers/serial/serial_core.c:2509): Excess function parameter 'port' description in 'uart_remove_one_port'
--- drivers/serial/serial_core.c | 4 ++-- include/linux/serial_core.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
drivers/serial/serial_core.c +2 -2
@@ -2426,7 +2426,7 @@ struct tty_driver *uart_console_device(struct console *co, int *index)/** * uart_add_one_port - attach a driver-defined port structure * @drv: pointer to the uart low level driver structure for this port -* @port: uart port structure to use for this port. +* @uport: uart port structure to use for this port. * * This allows the driver to register its own uart_port structure * with the core driver. The main purpose is to allow the low
@@ -2499,7 +2499,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)/** * uart_remove_one_port - detach a driver defined port structure * @drv: pointer to the uart low level driver structure for this port -* @port: uart port structure for this port +* @uport: uart port structure for this port * * This unhooks (and hangs up) the specified port structure from the * core driver. No further calls will be made to the low-level code
include/linux/serial_core.h +2 -2
@@ -477,7 +477,7 @@ static inline int uart_handle_break(struct uart_port *port)/** * uart_handle_dcd_change - handle a change of carrier detect state -* @port: uart_port structure for the open port +* @uport: uart_port structure for the open port * @status: new carrier detect status, nonzero if active */ static inline void
@@ -503,7 +503,7 @@ uart_handle_dcd_change(struct uart_port *uport, unsigned int status)/** * uart_handle_cts_change - handle a change of clear-to-send state -* @port: uart_port structure for the open port +* @uport: uart_port structure for the open port * @status: new clear to send status, nonzero if active */ static inline void
Signature · 1 line
1.6.0.6
Quoted 11 lines · On Wed, 23 Sep 2009 03:33:58 +0530 Jaswinder Singh Rajput wrote:
Warning(/home/jaswinder/linux-2.6//include/linux/serial_core.h:485): No description found for parameter 'uport'Warning(/home/jaswinder/linux-2.6//include/linux/serial_core.h:485): Excess function parameter 'port' description in 'uart_handle_dcd_change'Warning(/home/jaswinder/linux-2.6//include/linux/serial_core.h:511): No description found for parameter 'uport'Warning(/home/jaswinder/linux-2.6//include/linux/serial_core.h:511): Excess function parameter 'port' description in 'uart_handle_cts_change'Warning(/home/jaswinder/linux-2.6//drivers/serial/serial_core.c:2437): No description found for parameter 'uport'Warning(/home/jaswinder/linux-2.6//drivers/serial/serial_core.c:2437): Excess function parameter 'port' description in 'uart_add_one_port'Warning(/home/jaswinder/linux-2.6//drivers/serial/serial_core.c:2509): No description found for parameter 'uport'Warning(/home/jaswinder/linux-2.6//drivers/serial/serial_core.c:2509): Excess function parameter 'port' description in 'uart_remove_one_port'Signed-off-by Jaswinder Singh Rajput <[email protected]>
Ack. I've already sent the same patch.
Quoted 53 lines
--- drivers/serial/serial_core.c | 4 ++-- include/linux/serial_core.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)drivers/serial/serial_core.c +2
-2@@ -2426,7 +2426,7 @@ struct tty_driver *uart_console_device(struct console *co, int *index)/** * uart_add_one_port - attach a driver-defined port structure * @drv: pointer to the uart low level driver structure for this port -* @port: uart port structure to use for this port. +* @uport: uart port structure to use for this port. * * This allows the driver to register its own uart_port structure * with the core driver. The main purpose is to allow the low @@ -2499,7 +2499,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)/** * uart_remove_one_port - detach a driver defined port structure * @drv: pointer to the uart low level driver structure for this port -* @port: uart port structure for this port +* @uport: uart port structure for this port * * This unhooks (and hangs up) the specified port structure from the * core driver. No further calls will be made to the low-level code include/linux/serial_core.h +2
-2@@ -477,7 +477,7 @@ static inline int uart_handle_break(struct uart_port *port)/** * uart_handle_dcd_change - handle a change of carrier detect state -* @port: uart_port structure for the open port +* @uport: uart_port structure for the open port * @status: new carrier detect status, nonzero if active */ static inline void@@ -503,7 +503,7 @@ uart_handle_dcd_change(struct uart_port *uport, unsigned int status)/** * uart_handle_cts_change - handle a change of clear-to-send state -* @port: uart_port structure for the open port +* @uport: uart_port structure for the open port * @status: new clear to send status, nonzero if active */ static inline voidSignature · 1 line
1.6.0.6
---
~Randy