kvm ksm support v3
cover kvm ksm support v3
Change from v2 : remove unused if.
Thanks.
Izik Eidus (3):
kvm: dont hold pagecount reference for mapped sptes pages add SPTE_HOST_WRITEABLE flag to the shadow ptes add support for change_pte mmu notifiers
arch/x86/include/asm/kvm_host.h | 1 + arch/x86/kvm/mmu.c | 84 ++++++++++++++++++++++++++++++-------- arch/x86/kvm/paging_tmpl.h | 18 +++++++- virt/kvm/kvm_main.c | 14 ++++++ 4 files changed, 96 insertions(+), 21 deletions(-)
PATCH 1/3 kvm: dont hold pagecount reference for mapped sptes pages
When using mmu notifiers, we are allowed to remove the page count reference tooken by get_user_pages to a specific page that is mapped inside the shadow page tables.
This is needed so we can balance the pagecount against mapcount checking.
(Right now kvm increase the pagecount and does not increase the mapcount when mapping page into shadow page table entry, so when comparing pagecount against mapcount, you have no reliable result.)
--- arch/x86/kvm/mmu.c | 7 ++----- 1 files changed, 2 insertions(+), 5 deletions(-)
arch/x86/kvm/mmu.c +2 -5
@@ -634,9 +634,7 @@ static void rmap_remove(struct kvm *kvm, u64 *spte)if (*spte & shadow_accessed_mask)kvm_set_pfn_accessed (pfn);if (is_writeble_pte (*spte)) -kvm_release_pfn_dirty (pfn); -else -kvm_release_pfn_clean (pfn); +kvm_set_pfn_dirty (pfn); rmapp =gfn_to_rmap (kvm, sp->gfns[spte - sp->spt], sp->role.level);if (!*rmapp) {printk (KERN_ERR "rmap_remove: %p %llx 0->BUG\n" , spte, *spte);
@@ -1877,8 +1875,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,page_header_update_slot (vcpu->kvm, sptep, gfn);if (!was_rmapped) { rmap_count =rmap_add (vcpu, sptep, gfn); -if (!is_rmap_spte (*sptep)) -kvm_release_pfn_clean (pfn); +kvm_release_pfn_clean (pfn);if (rmap_count >RMAP_RECYCLE_THRESHOLD )rmap_recycle (vcpu, sptep, gfn); }else {
Signature · 1 line
1.5.6.5
PATCH 2/3 add SPTE_HOST_WRITEABLE flag to the shadow ptes
this flag notify that the host physical page we are pointing to from the spte is write protected, and therefore we cant change its access to be write unless we run get_user_pages(write = 1).
(this is needed for change_pte support in kvm)
--- arch/x86/kvm/mmu.c | 15 +++++++++++---- arch/x86/kvm/paging_tmpl.h | 18 +++++++++++++++--- 2 files changed, 26 insertions(+), 7 deletions(-)
arch/x86/kvm/mmu.c +11 -4
@@ -156,6 +156,8 @@ module_param(oos_shadow, bool, 0644);#define CREATE_TRACE_POINTS #include "mmutrace.h" +#define SPTE_HOST_WRITEABLE (1ULL << PT_FIRST_AVAIL_BITS_SHIFT) +#define SHADOW_PT_INDEX (addr, level) PT64_INDEX(addr, level)struct kvm_rmap_desc {
@@ -1754,7 +1756,7 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep, unsigned pte_access, int user_fault, int write_fault, int dirty, int level, gfn_t gfn, pfn_t pfn, bool speculative, - bool can_unsync) + bool can_unsync, bool reset_host_protection) { u64 spte;int ret =0 ;
@@ -1781,6 +1783,9 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep, spte |= kvm_x86_ops->get_mt_mask (vcpu, gfn,kvm_is_mmio_pfn (pfn)); +if (reset_host_protection) + spte |=SPTE_HOST_WRITEABLE ; + spte |= (u64 )pfn <<PAGE_SHIFT ; if ((pte_access & ACC_WRITE_MASK)
@@ -1826,7 +1831,8 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep, unsigned pt_access, unsigned pte_access, int user_fault, int write_fault, int dirty, int *ptwrite, int level, gfn_t gfn, - pfn_t pfn, bool speculative) + pfn_t pfn, bool speculative, + bool reset_host_protection) { int was_rmapped = 0;int was_writeble =is_writeble_pte (*sptep);
@@ -1858,7 +1864,8 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep, }if (set_spte (vcpu, sptep, pte_access, user_fault, write_fault, - dirty, level, gfn, pfn, speculative, true)) { + dirty, level, gfn, pfn, speculative, true, + reset_host_protection)) {if (write_fault) *ptwrite =1 ; kvm_x86_ops->tlb_flush (vcpu);
@@ -1906,7 +1913,7 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,if (iterator.level == level) {mmu_set_spte (vcpu, iterator.sptep,ACC_ALL ,ACC_ALL ,0 , write,1 , &pt_write, - level, gfn, pfn, false); + level, gfn, pfn, false, true); ++vcpu->stat.pf_fixed;break ; }
arch/x86/kvm/paging_tmpl.h +15 -3
@@ -273,9 +273,13 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,if (mmu_notifier_retry (vcpu, vcpu->arch.update_pte.mmu_seq))return ;kvm_get_pfn (pfn); +/* +* we call mmu_set_spte() with reset_host_protection = true beacuse that +* vcpu->arch.update_pte.pfn was fetched from get_user_pages(write = 1). +*/ mmu_set_spte (vcpu, spte, page->role.access, pte_access,0 ,0 , gpte &PT_DIRTY_MASK ,NULL ,PT_PAGE_TABLE_LEVEL , -gpte_to_gfn (gpte), pfn, true); +gpte_to_gfn (gpte), pfn, true, true); }/*
@@ -308,7 +312,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr, user_fault, write_fault, gw->ptes[gw->level-1 ] &PT_DIRTY_MASK , ptwrite, level, - gw->gfn, pfn, false); + gw->gfn, pfn, false, true);break ; }
@@ -558,6 +562,7 @@ static void FNAME(prefetch_page)(struct kvm_vcpu *vcpu,static int FNAME (sync_page )(struct kvm_vcpu *vcpu,struct kvm_mmu_page *sp) {int i, offset, nr_present; +bool reset_host_protection; offset = nr_present =0 ;
@@ -595,9 +600,16 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp) nr_present++; pte_access = sp->role.access &FNAME (gpte_access)(vcpu, gpte); +if (!(sp->spt[i] &SPTE_HOST_WRITEABLE )) { + pte_access &= ~ACC_WRITE_MASK ; + reset_host_protection =0 ; + }else { + reset_host_protection =1 ; + }set_spte (vcpu, &sp->spt[i], pte_access,0 ,0 ,is_dirty_gpte (gpte),PT_PAGE_TABLE_LEVEL , gfn, -spte_to_pfn (sp->spt[i]), true, false); +spte_to_pfn (sp->spt[i]), true, false, + reset_host_protection); }return !nr_present;
Signature · 1 line
1.5.6.5
PATCH 3/3 add support for change_pte mmu notifiers
this is needed for kvm if it want ksm to directly map pages into its shadow page tables.
--- arch/x86/include/asm/kvm_host.h | 1 + arch/x86/kvm/mmu.c | 62 +++++++++++++++++++++++++++++++++----- virt/kvm/kvm_main.c | 14 +++++++++ 3 files changed, 68 insertions(+), 9 deletions(-)
arch/x86/include/asm/kvm_host.h +1 -0
@@ -796,6 +796,7 @@ asmlinkage void kvm_handle_fault_on_reboot(void);#define KVM_ARCH_WANT_MMU_NOTIFIER int kvm_unmap_hva (struct kvm *kvm,unsigned long hva);int kvm_age_hva (struct kvm *kvm,unsigned long hva); +void kvm_set_spte_hva (struct kvm *kvm,unsigned long hva,pte_t pte);int cpuid_maxphyaddr (struct kvm_vcpu *vcpu);int kvm_cpu_has_interrupt (struct kvm_vcpu *vcpu);int kvm_arch_interrupt_allowed (struct kvm_vcpu *vcpu);
arch/x86/kvm/mmu.c +53 -9
104 lines not on this page · raw message
virt/kvm/kvm_main.c +14 -0
@@ -851,6 +851,19 @@ static void kvm_mmu_notifier_invalidate_page(struct mmu_notifier *mn, } +static void kvm_mmu_notifier_change_pte (struct mmu_notifier *mn, +struct mm_struct *mm, +unsigned long address, +pte_t pte) +{ +struct kvm *kvm =mmu_notifier_to_kvm (mn); + +spin_lock (&kvm->mmu_lock); + kvm->mmu_notifier_seq++; +kvm_set_spte_hva (kvm, address, pte); +spin_unlock (&kvm->mmu_lock); +} + static void kvm_mmu_notifier_invalidate_range_start(struct mmu_notifier *mn, struct mm_struct *mm, unsigned long start,
@@ -930,6 +943,7 @@ static const struct mmu_notifier_ops kvm_mmu_notifier_ops = { .invalidate_range_start = kvm_mmu_notifier_invalidate_range_start, .invalidate_range_end = kvm_mmu_notifier_invalidate_range_end, .clear_flush_young = kvm_mmu_notifier_clear_flush_young, + .change_pte = kvm_mmu_notifier_change_pte, .release = kvm_mmu_notifier_release, };#endif /* CONFIG_MMU_NOTIFIER && KVM_ARCH_WANT_MMU_NOTIFIER */
Signature · 1 line
1.5.6.5
Re: [PATCH 3/3] add support for change_pte mmu notifiers
Quoted 52 lines · Izik Eidus
this is needed for kvm if it want ksm to directly map pages into its shadow page tables.
Signed-off-by Izik Eidus <[email protected]>--- arch/x86/include/asm/kvm_host.h | 1 + arch/x86/kvm/mmu.c | 62 +++++++++++++++++++++++++++++++++----- virt/kvm/kvm_main.c | 14 +++++++++ 3 files changed, 68 insertions(+), 9 deletions(-)arch/x86/include/asm/kvm_host.h +1
-0@@ -796,6 +796,7 @@ asmlinkage void kvm_handle_fault_on_reboot(void);#define KVM_ARCH_WANT_MMU_NOTIFIER int kvm_unmap_hva (struct kvm *kvm,unsigned long hva);int kvm_age_hva (struct kvm *kvm,unsigned long hva); +void kvm_set_spte_hva (struct kvm *kvm,unsigned long hva,pte_t pte);int cpuid_maxphyaddr (struct kvm_vcpu *vcpu);int kvm_cpu_has_interrupt (struct kvm_vcpu *vcpu);int kvm_arch_interrupt_allowed (struct kvm_vcpu *vcpu);arch/x86/kvm/mmu.c +12
-3@@ -748,7 +748,7 @@ static int rmap_write_protect(struct kvm *kvm, u64 gfn)return write_protected; } -static int kvm_unmap_rmapp (struct kvm *kvm,unsigned long *rmapp) +static int kvm_unmap_rmapp (struct kvm *kvm,unsigned long *rmapp,u64 data) {u64 *spte;int need_tlb_flush =0 ;@@ -763,8 +763,45 @@ static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp)return need_tlb_flush; } -static int kvm_handle_hva (struct kvm *kvm,unsigned long hva, -int (*handler)(struct kvm *kvm,unsigned long *rmapp)) +static int kvm_set_pte_rmapp (struct kvm *kvm,unsigned long *rmapp,u64 data) +{ +int need_flush =0 ; +u64 *spte, new_spte; +pte_t *ptep = (pte_t *)data; +pfn_t new_pfn; + +WARN_ON (pte_huge (*ptep)); + new_pfn =pte_pfn (*ptep); + spte =rmap_next (kvm, rmapp,NULL ); +while (spte) {
arch/x86/kvm/mmu.c static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp) · line 786
Quoted 10 lines
arch/x86/kvm/mmu.c +10
-0+BUG_ON (!is_shadow_present_pte (*spte)); +rmap_printk ("kvm_set_pte_rmapp: spte %p %llx\n" , spte, *spte); + need_flush =1 ; +if (pte_write (*ptep)) { +rmap_remove (kvm, spte); +__set_spte (spte, shadow_trap_nonpresent_pte); + spte =rmap_next (kvm, rmapp,NULL ); + }else { + new_spte = *spte &~ (PT64_BASE_ADDR_MASK ); + new_spte |= new_pfn <<PAGE_SHIFT ;
new_spte |= (u64)new_pfn << PAGE_SHIFT;
Otherwise looks good to me.
Quoted 13 lines
arch/x86/kvm/mmu.c +13
-0+ new_spte &= ~PT_WRITABLE_MASK ; + new_spte &= ~SPTE_HOST_WRITEABLE ; +if (is_writeble_pte (*spte)) +kvm_set_pfn_dirty (spte_to_pfn (*spte)); +__set_spte (spte, new_spte); + spte =rmap_next (kvm, rmapp, spte); + } + } +if (need_flush) +kvm_flush_remote_tlbs (kvm); + +return 0 ; +}
Re: [PATCH 3/3] add support for change_pte mmu notifiers
In reply to Izik Eidusarch/x86/kvm/mmu.c static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp) · line 797
Quoted 2 lines · Izik Eidus
arch/x86/kvm/mmu.c +2
-0+if (need_flush) +kvm_flush_remote_tlbs (kvm);
need_flush can be return to kvm_mmu_notifier_change_pte to defer the tlb flush after dropping the spin lock I think. We are forced to flush the tlb inside spin_lock in kvm normal context because that stops the VM from freeing the page (it hangs on the mmu_lock taken by kvm invalidate_page/change_pte) so we can unmap tons of sptes and do a single kvm tlb flush that covers them all (by keeping both actions under the mmu_lock), but in mmu notifier context the pages can't be freed from under the guest, so we can flush the tlb flushing the tlb before making the page freeable, because both old and new page in do_wp_page are still pinned and can't be freed and reused from under us even if we release mmu_lock before tlb flush.
Re: [PATCH 2/3] add SPTE_HOST_WRITEABLE flag to the shadow ptes
In reply to Izik EidusQuoted 7 lines · Izik Eidus
this flag notify that the host physical page we are pointing to from the spte is write protected, and therefore we cant change its access to be write unless we run
get_user_pages(write = 1).(this is needed for
change_ptesupport in kvm)Signed-off-by Izik Eidus <[email protected]>
Re: [PATCH 1/3] kvm: dont hold pagecount reference for mapped sptes pages
In reply to Izik EidusThis needs compat code for !MMU_NOTIFIERS case in kvm-kmod (Jan CC'ed).
Otherwise looks good.
Quoted 44 lines · Izik Eidus
When using mmu notifiers, we are allowed to remove the page count reference tooken by
get_user_pagesto a specific page that is mapped inside the shadow page tables.This is needed so we can balance the pagecount against mapcount checking.
(Right now kvm increase the pagecount and does not increase the mapcount when mapping page into shadow page table entry, so when comparing pagecount against mapcount, you have no reliable result.)
Signed-off-by Izik Eidus <[email protected]>--- arch/x86/kvm/mmu.c | 7 ++----- 1 files changed, 2 insertions(+), 5 deletions(-)arch/x86/kvm/mmu.c +2
-5@@ -634,9 +634,7 @@ static void rmap_remove(struct kvm *kvm, u64 *spte)if (*spte & shadow_accessed_mask)kvm_set_pfn_accessed (pfn);if (is_writeble_pte (*spte)) -kvm_release_pfn_dirty (pfn); -else -kvm_release_pfn_clean (pfn); +kvm_set_pfn_dirty (pfn); rmapp =gfn_to_rmap (kvm, sp->gfns[spte - sp->spt], sp->role.level);if (!*rmapp) {printk (KERN_ERR "rmap_remove: %p %llx 0->BUG\n" , spte, *spte);@@ -1877,8 +1875,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,page_header_update_slot (vcpu->kvm, sptep, gfn);if (!was_rmapped) { rmap_count =rmap_add (vcpu, sptep, gfn); -if (!is_rmap_spte (*sptep)) -kvm_release_pfn_clean (pfn); +kvm_release_pfn_clean (pfn);if (rmap_count >RMAP_RECYCLE_THRESHOLD )rmap_recycle (vcpu, sptep, gfn); }else {Signature · 1 line
1.5.6.5
Re: [PATCH 1/3] kvm: dont hold pagecount reference for mapped sptes pages
In reply to Izik EidusQuoted 7 lines · Izik Eidus
When using mmu notifiers, we are allowed to remove the page count reference tooken by
get_user_pagesto a specific page that is mapped inside the shadow page tables.This is needed so we can balance the pagecount against mapcount checking.
Quoted 6 lines
(Right now kvm increase the pagecount and does not increase the mapcount when mapping page into shadow page table entry, so when comparing pagecount against mapcount, you have no reliable result.)
Signed-off-by Izik Eidus <[email protected]>
Marcelo Tosatti
AppliedQuoted 9 lines · Izik Eidus
Change from v2 : remove unused if.
Thanks.
Izik Eidus (3):
kvm: dont hold pagecount reference for mapped sptes pages addSPTE_HOST_WRITEABLEflag to the shadow ptes add support forchange_ptemmu notifiers
Quoted 5 lines
arch/x86/include/asm/kvm_host.h | 1 + arch/x86/kvm/mmu.c | 84 ++++++++++++++++++++++++++++++-------- arch/x86/kvm/paging_tmpl.h | 18 +++++++- virt/kvm/kvm_main.c | 14 ++++++ 4 files changed, 96 insertions(+), 21 deletions(-)
Applied, thanks.