ima: ecryptfs fix imbalance message
PATCH 1/1 ima: ecryptfs fix imbalance message
The underlying files are measured. Update the counters to get rid of the ecryptfs imbalance message. (http://bugzilla.redhat.com/519737)
--- fs/ecryptfs/main.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-)
fs/ecryptfs/main.c +3 -1
@@ -35,6 +35,7 @@#include <linux/key.h> #include <linux/parser.h> #include <linux/fs_stack.h> +#include <linux/ima.h> #include "ecryptfs_kernel.h" /**
@@ -135,7 +136,8 @@ int ecryptfs_init_persistent_file(struct dentry *ecryptfs_dentry) "rc = [%d]\n", lower_dentry, lower_mnt, rc); rc =PTR_ERR (inode_info->lower_file); inode_info->lower_file =NULL ; - } + }else +ima_counts_get (inode_info->lower_file); }mutex_unlock (&inode_info->lower_file_mutex);return rc;
Signature · 1 line
1.6.0.6
Quoted 2 lines · Mimi Zohar
The underlying files are measured. Update the counters to get rid of the ecryptfs imbalance message. (http://bugzilla.redhat.com/519737)
Which kernel(s) is this needed for?
Quoted 39 lines
Reported-by Sachin Garg <[email protected]>Signed-off-by Mimi Zohar <[email protected]>--- fs/ecryptfs/main.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-)fs/ecryptfs/main.c +3
-1@@ -35,6 +35,7 @@#include <linux/key.h> #include <linux/parser.h> #include <linux/fs_stack.h> +#include <linux/ima.h> #include "ecryptfs_kernel.h" /** @@ -135,7 +136,8 @@ int ecryptfs_init_persistent_file(struct dentry *ecryptfs_dentry) "rc = [%d]\n", lower_dentry, lower_mnt, rc); rc =PTR_ERR (inode_info->lower_file); inode_info->lower_file =NULL ; - } + }else +ima_counts_get (inode_info->lower_file); }mutex_unlock (&inode_info->lower_file_mutex);return rc;Signature · 7 lines
1.6.0.6 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Signature · 2 lines
James Morris <[email protected]>
Quoted 6 lines · James Morris
Quoted 2 lines · Mimi Zohar
The underlying files are measured. Update the counters to get rid of the ecryptfs imbalance message. (http://bugzilla.redhat.com/519737)
Which kernel(s) is this needed for?
The patch applies cleanly to 2.6.31 stable and on.
Mimi
Quoted 23 lines · Mimi Zohar
The underlying files are measured. Update the counters to get rid of the ecryptfs imbalance message. (http://bugzilla.redhat.com/519737)
Reported-by Sachin Garg <[email protected]>Signed-off-by Mimi Zohar <[email protected]>--- fs/ecryptfs/main.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-)fs/ecryptfs/main.c +1
-0@@ -35,6 +35,7 @@#include <linux/key.h> #include <linux/parser.h> #include <linux/fs_stack.h> +#include <linux/ima.h> #include "ecryptfs_kernel.h" /**
fs/ecryptfs/main.c int ecryptfs_init_persistent_file(struct dentry *ecryptfs_dentry) · line 143
Quoted 9 lines
fs/ecryptfs/main.c +2
-1@@ -135,7 +136,8 @@ int ecryptfs_init_persistent_file(struct dentry *ecryptfs_dentry) "rc = [%d]\n", lower_dentry, lower_mnt, rc); rc =PTR_ERR (inode_info->lower_file); inode_info->lower_file =NULL ; - } + }else +ima_counts_get (inode_info->lower_file); }mutex_unlock (&inode_info->lower_file_mutex);return rc;
Hi Mimi - I can't think of why we would want to measure the underlying files. The file contents are encrypted with a randomly generated key and there is eCryptfs metadata stored in the first 8K of the underlying file. If you have two eCryptfs mounts, using the same key, and copy the same file into both mount points, you'll end up with two entirely different underlying files.
Taking a closer look at IMA is still on my TODO list, so I could be missing something obvious. The upper (decrypted) file is being measured, right?
For performance and the reason mentioned above, it seems like the proper fix is to only measure the upper file. What do you think?
Tyler
Quoted 41 lines · Tyler Hicks
Quoted 23 lines · Mimi Zohar
The underlying files are measured. Update the counters to get rid of the ecryptfs imbalance message. (http://bugzilla.redhat.com/519737)
Reported-by Sachin Garg <[email protected]>Signed-off-by Mimi Zohar <[email protected]>--- fs/ecryptfs/main.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-)fs/ecryptfs/main.c +1
-0@@ -35,6 +35,7 @@#include <linux/key.h> #include <linux/parser.h> #include <linux/fs_stack.h> +#include <linux/ima.h> #include "ecryptfs_kernel.h" /** fs/ecryptfs/main.c int ecryptfs_init_persistent_file(struct dentry *ecryptfs_dentry) · line 143
Quoted 9 lines
fs/ecryptfs/main.c +2
-1@@ -135,7 +136,8 @@ int ecryptfs_init_persistent_file(struct dentry *ecryptfs_dentry) "rc = [%d]\n", lower_dentry, lower_mnt, rc); rc =PTR_ERR (inode_info->lower_file); inode_info->lower_file =NULL ; - } + }else +ima_counts_get (inode_info->lower_file); }mutex_unlock (&inode_info->lower_file_mutex);return rc;Hi Mimi - I can't think of why we would want to measure the underlying files. The file contents are encrypted with a randomly generated key and there is eCryptfs metadata stored in the first 8K of the underlying file. If you have two eCryptfs mounts, using the same key, and copy the same file into both mount points, you'll end up with two entirely different underlying files.
Quoted 8 lines
Taking a closer look at IMA is still on my TODO list, so I could be missing something obvious. The upper (decrypted) file is being measured, right?
For performance and the reason mentioned above, it seems like the proper fix is to only measure the upper file. What do you think?
Tyler
Yes, the terminology 'underlying files are measured' was incorrect. It is measuring the decrypted files.
Thanks!
Mimi
On Wed Sep 30, 2009 at 04:00:21PM -0400, Mimi Zohar ([email protected]) was quoted:
Quoted 46 lines · Tyler Hicks
Quoted 45 lines · Mimi Zohar
Quoted 23 lines
The underlying files are measured. Update the counters to get rid of the ecryptfs imbalance message. (http://bugzilla.redhat.com/519737)
Reported-by Sachin Garg <[email protected]>Signed-off-by Mimi Zohar <[email protected]>--- fs/ecryptfs/main.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-)fs/ecryptfs/main.c +1
-0@@ -35,6 +35,7 @@#include <linux/key.h> #include <linux/parser.h> #include <linux/fs_stack.h> +#include <linux/ima.h> #include "ecryptfs_kernel.h" /** fs/ecryptfs/main.c int ecryptfs_init_persistent_file(struct dentry *ecryptfs_dentry) · line 143
Quoted 9 lines
fs/ecryptfs/main.c +2
-1@@ -135,7 +136,8 @@ int ecryptfs_init_persistent_file(struct dentry *ecryptfs_dentry) "rc = [%d]\n", lower_dentry, lower_mnt, rc); rc =PTR_ERR (inode_info->lower_file); inode_info->lower_file =NULL ; - } + }else +ima_counts_get (inode_info->lower_file); }mutex_unlock (&inode_info->lower_file_mutex);return rc;Hi Mimi - I can't think of why we would want to measure the underlying files. The file contents are encrypted with a randomly generated key and there is eCryptfs metadata stored in the first 8K of the underlying file. If you have two eCryptfs mounts, using the same key, and copy the same file into both mount points, you'll end up with two entirely different underlying files.
Taking a closer look at IMA is still on my TODO list, so I could be missing something obvious. The upper (decrypted) file is being measured, right?
Quoted 8 lines
Quoted 4 lines
For performance and the reason mentioned above, it seems like the proper fix is to only measure the upper file. What do you think?
Tyler
Yes, the terminology 'underlying files are measured' was incorrect. It is measuring the decrypted files.
Thanks to some offline help from you, I enabled IMA and verified that only the upper file is being measured. However, this patch causes a lockdep warning when reading a file from an eCryptfs mount as root. I haven't had a chance to look into it yet, but here's what I'm seeing:
kernel: =======================================================
kernel: [ INFO: possible circular locking dependency detected ]
kernel: 2.6.32-rc2 #11
kernel: -------------------------------------------------------
kernel: cat/1392 is trying to acquire lock:
kernel: (&inode_info->lower_file_mutex){+.+.+.}, at: [<ffffffffa00bb622>] ecryptfs_read_lower+0x34/0xa0 [ecryptfs] kernel:
kernel: but task is already holding lock:
kernel: (&crypt_stat->cs_mutex){+.+.+.}, at: [<ffffffffa00b83ac>] ecryptfs_open+0x15d/0x219 [ecryptfs] kernel:
kernel: which lock already depends on the new lock.
kernel:
kernel:
kernel: the existing dependency chain (in reverse order) is:
kernel:
kernel: -> #2 (&crypt_stat->cs_mutex){+.+.+.}:
kernel: [<ffffffff8106dad6>] __lock_acquire+0xb50/0xcf9
kernel: [<ffffffff8106dd5b>] lock_acquire+0xdc/0x102
kernel: [<ffffffff8133a606>] __mutex_lock_common+0x4b/0x350
kernel: [<ffffffff8133a9cf>] mutex_lock_nested+0x3e/0x43
kernel: [<ffffffffa00b82f3>] ecryptfs_open+0xa4/0x219 [ecryptfs]
kernel: [<ffffffff810da552>] __dentry_open+0x1e7/0x35a
kernel: [<ffffffff810da74c>] dentry_open+0x87/0x8e
kernel: [<ffffffff811988d4>] ima_path_check+0x150/0x1f7
kernel: [<ffffffff810e607f>] may_open+0xe5/0x21b
kernel: [<ffffffff810e68e1>] do_filp_open+0x4eb/0x9b0
kernel: [<ffffffff810da273>] do_sys_open+0x63/0x10f
kernel: [<ffffffff810da352>] sys_open+0x20/0x22
kernel: [<ffffffff8100bb42>] system_call_fastpath+0x16/0x1b
kernel:
kernel: -> #1 (&iint->mutex){+.+.+.}:
kernel: [<ffffffff8106dad6>] __lock_acquire+0xb50/0xcf9
kernel: [<ffffffff8106dd5b>] lock_acquire+0xdc/0x102
kernel: [<ffffffff8133a606>] __mutex_lock_common+0x4b/0x350
kernel: [<ffffffff8133a9cf>] mutex_lock_nested+0x3e/0x43
kernel: [<ffffffff81198644>] ima_counts_get+0x54/0xa0
kernel: [<ffffffffa00ba20f>] ecryptfs_init_persistent_file+0xa9/0xc3 [ecryptfs]
kernel: [<ffffffffa00b9c92>] ecryptfs_lookup_and_interpose_lower+0x1c3/0x299 [ecryptfs]
kernel: [<ffffffffa00b9f13>] ecryptfs_lookup+0x1ab/0x1d8 [ecryptfs]
kernel: [<ffffffff810e4217>] do_lookup+0xd1/0x167
kernel: [<ffffffff810e4cc5>] __link_path_walk+0x591/0x6c2
kernel: [<ffffffff810e4f96>] path_walk+0x4c/0x8f
kernel: [<ffffffff810e534b>] do_path_lookup+0x2a/0x8b
kernel: [<ffffffff810e64d7>] do_filp_open+0xe1/0x9b0
kernel: [<ffffffff810da273>] do_sys_open+0x63/0x10f
kernel: [<ffffffff810da352>] sys_open+0x20/0x22
kernel: [<ffffffff8100bb42>] system_call_fastpath+0x16/0x1b
kernel:
kernel: -> #0 (&inode_info->lower_file_mutex){+.+.+.}:
kernel: [<ffffffff8106d980>] __lock_acquire+0x9fa/0xcf9
kernel: [<ffffffff8106dd5b>] lock_acquire+0xdc/0x102
kernel: [<ffffffff8133a606>] __mutex_lock_common+0x4b/0x350
kernel: [<ffffffff8133a9cf>] mutex_lock_nested+0x3e/0x43
kernel: [<ffffffffa00bb622>] ecryptfs_read_lower+0x34/0xa0 [ecryptfs]
kernel: [<ffffffffa00bcc31>] ecryptfs_read_metadata+0x8d/0x14e [ecryptfs]
kernel: [<ffffffffa00b83c6>] ecryptfs_open+0x177/0x219 [ecryptfs]
kernel: [<ffffffff810da552>] __dentry_open+0x1e7/0x35a
kernel: [<ffffffff810da74c>] dentry_open+0x87/0x8e
kernel: [<ffffffff811988d4>] ima_path_check+0x150/0x1f7
kernel: [<ffffffff810e607f>] may_open+0xe5/0x21b
kernel: [<ffffffff810e68e1>] do_filp_open+0x4eb/0x9b0
kernel: [<ffffffff810da273>] do_sys_open+0x63/0x10f
kernel: [<ffffffff810da352>] sys_open+0x20/0x22
kernel: [<ffffffff8100bb42>] system_call_fastpath+0x16/0x1bkernel:
kernel: other info that might help us debug this:
kernel:
kernel: 2 locks held by cat/1392:
kernel: #0: (&iint->mutex){+.+.+.}, at: [<ffffffff811987f3>] ima_path_check+0x6f/0x1f7
kernel: #1: (&crypt_stat->cs_mutex){+.+.+.}, at: [<ffffffffa00b83ac>] ecryptfs_open+0x15d/0x219 [ecryptfs] kernel:
kernel: stack backtrace:
kernel: Pid: 1392, comm: cat Not tainted 2.6.32-rc2 #11
kernel: Call Trace:
kernel: [<ffffffff8106cb64>] print_circular_bug+0xa8/0xb6
kernel: [<ffffffff8106d980>] __lock_acquire+0x9fa/0xcf9
kernel: [<ffffffff81075b54>] ? __module_text_address+0x12/0x58
kernel: [<ffffffff8106dd5b>] lock_acquire+0xdc/0x102
kernel: [<ffffffffa00bb622>] ? ecryptfs_read_lower+0x34/0xa0 [ecryptfs]
kernel: [<ffffffff8106e62c>] ? check_usage_backwards+0x4c/0x80
kernel: [<ffffffffa00bb622>] ? ecryptfs_read_lower+0x34/0xa0 [ecryptfs]
kernel: [<ffffffff8133a606>] __mutex_lock_common+0x4b/0x350
kernel: [<ffffffffa00bb622>] ? ecryptfs_read_lower+0x34/0xa0 [ecryptfs]
kernel: [<ffffffff8106bf4c>] ? mark_lock+0x27/0x21e
kernel: [<ffffffff8106c0f8>] ? mark_lock+0x1d3/0x21e
kernel: [<ffffffff8106c195>] ? mark_held_locks+0x52/0x70
kernel: [<ffffffff8133a9cf>] mutex_lock_nested+0x3e/0x43
kernel: [<ffffffffa00bb622>] ecryptfs_read_lower+0x34/0xa0 [ecryptfs]
kernel: [<ffffffffa00bcc31>] ecryptfs_read_metadata+0x8d/0x14e [ecryptfs]
kernel: [<ffffffffa00b83c6>] ecryptfs_open+0x177/0x219 [ecryptfs]
kernel: [<ffffffffa00b824f>] ? ecryptfs_open+0x0/0x219 [ecryptfs]
kernel: [<ffffffff810da552>] __dentry_open+0x1e7/0x35a
kernel: [<ffffffff810da74c>] dentry_open+0x87/0x8e
kernel: [<ffffffff811988d4>] ima_path_check+0x150/0x1f7
kernel: [<ffffffff81186016>] ? selinux_inode_permission+0x40/0x45
kernel: [<ffffffff810e607f>] may_open+0xe5/0x21b
kernel: [<ffffffff810e68e1>] do_filp_open+0x4eb/0x9b0
kernel: [<ffffffff810f074c>] ? alloc_fd+0x3b/0x128
kernel: [<ffffffff811c5377>] ? _raw_spin_unlock+0x8f/0x98
kernel: [<ffffffff8133bad8>] ? _spin_unlock+0x2b/0x30
kernel: [<ffffffff810f0827>] ? alloc_fd+0x116/0x128
kernel: [<ffffffff810da273>] do_sys_open+0x63/0x10f
kernel: [<ffffffff810da352>] sys_open+0x20/0x22
kernel: [<ffffffff8100bb42>] system_call_fastpath+0x16/0x1b
Tyler