Skip to contentSkip to conversation

LVM: Mirrored log support

PATCH In review Jonathan Brassow 3 participants 3 messages Oct 8, 2009 – Oct 9, 2009 Device mapper

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 LVM: Mirrored log support

I spent the last few days looking over the mirror allocation code. I wanted to understand why 'log_count' was being treated generically in most places... as if the idea of mirrored logs were already thought of. I mostly discovered that it was possible to push what looked like incomplete code towards completion. The following patches represent where I would like the mirrored log support to start from.

These patches are a replacement to the proposed patches - a fresh start. They address a couple problems that I saw with the old patches: 1) Allocation policies are respected and behave the same as today for other log types.
2) The on-disk layout of the previous version - when given only two disks to allocate from - would put the log on the front of one device and the back of another. This virtually ensures a performance hit. These patches put the logs in the same place WRT the images.
3) The new patches reduce parameter bloat. I think the previous patches required the extra parameters because they were using functions deep in the code that were from higher levels... adding parameters and "spaghettifying" the code.

These patches should be considered a starting point. While 'lvcreate' works, 'lvconvert' does not handle all transitions. In fact, 'lvconvert' will only handle 'core' -> 'disk/redundant' and 'disk/redundant' -> 'core'. It will not handle 'disk' <-> 'redundant'.

brassow

#1 lore raw

Hi Jon,

shouldn't these rather go to lvm-devel ?

Heinz

Quoted 31 lines · Jonathan Brassow

I spent the last few days looking over the mirror allocation code. I wanted to understand why 'log_count' was being treated generically in most places... as if the idea of mirrored logs were already thought of. I mostly discovered that it was possible to push what looked like incomplete code towards completion. The following patches represent where I would like the mirrored log support to start from.

These patches are a replacement to the proposed patches - a fresh start. They address a couple problems that I saw with the old patches: 1) Allocation policies are respected and behave the same as today for other log types.
2) The on-disk layout of the previous version - when given only two disks to allocate from - would put the log on the front of one device and the back of another. This virtually ensures a performance hit. These patches put the logs in the same place WRT the images.
3) The new patches reduce parameter bloat. I think the previous patches required the extra parameters because they were using functions deep in the code that were from higher levels... adding parameters and "spaghettifying" the code.

These patches should be considered a starting point. While 'lvcreate' works, 'lvconvert' does not handle all transitions. In fact, 'lvconvert' will only handle 'core' -> 'disk/redundant' and 'disk/redundant' -> 'core'. It will not handle 'disk' <-> 'redundant'.

brassow

--
dm-devel mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/dm-devel

#2 lore raw
In reply to Jonathan Brassow
Quoted 4 lines · Jonathan Brassow [jbrassow at redhat.com]

These patches are a replacement to the proposed patches - a fresh start. They address a couple problems that I saw with the old patches: 1) Allocation policies are respected and behave the same as today for other log types.

Quoted 8 lines

2) The on-disk layout of the previous version - when given only two disks to allocate from - would put the log on the front of one device and the back of another. This virtually ensures a performance hit. These patches put the logs in the same place WRT the images.
3) The new patches reduce parameter bloat. I think the previous patches required the extra parameters because they were using functions deep in the code that were from higher levels... adding parameters and "spaghettifying" the code.

Thank you, Jonathan. I tested creating mirrored volumes with the new patchset and was able to activate/deactivate with the old patchset and vice-versa. I was able to create mirrored volumes with new patchset and was able to activate/deactivate with the virgin 2.02.53 LVM code.

Quoted 4 lines

These patches should be considered a starting point. While 'lvcreate' works, 'lvconvert' does not handle all transitions. In fact, 'lvconvert' will only handle 'core' -> 'disk/redundant' and 'disk/redundant' -> 'core'. It will not handle 'disk' <-> 'redundant'.

I haven't tried these, will try next. Initially, I thought anyone wishing to go from 'disk' to 'redundant' can go to 'disk -> core' and then 'core -> redundant'. The only problem is they may lose the 'sync' status and the second conversion may sync the mirror data. We can either choose to support 'disk <-> redundant' OR supply '--nosync' option to lvconvert. What do you think?

Thank you again for the patchset.

--Malahal.