Cleanups for: line length, printk KERN_ argument, stack frame size > 2048 (added a kmalloc/kfree), style/formatting errors, incorrect include files
PATCH 1/1 Cleanups for: line length, printk KERN_ argument, stack frame size > 2048 (added a kmalloc/kfree), style/formatting errors, incorrect include files
--- drivers/staging/comedi/drivers/serial2002.c | 342 +++++++++++--------------- 1 files changed, 145 insertions(+), 197 deletions(-)
drivers/staging/comedi/drivers/serial2002.c +145 -197
@@ -36,10 +36,10 @@ Status: in development#include <linux/delay.h> #include <linux/ioport.h> -#include <asm/termios.h> -#include <asm/ioctls.h> +#include <linux/termios.h> #include <linux/serial.h> #include <linux/poll.h> +#include <linux/sched.h> /* * Board descriptions for two imaginary boards. Describing the
@@ -125,13 +125,11 @@ struct serial_data {static long tty_ioctl (struct file *f,unsigned op,unsigned long param) {#ifdef HAVE_UNLOCKED_IOCTL -if (f->f_op->unlocked_ioctl) { +if (f->f_op->unlocked_ioctl)return f->f_op->unlocked_ioctl (f, op, param); - }#endif -if (f->f_op->ioctl) { +if (f->f_op->ioctl)return f->f_op->ioctl (f->f_dentry->d_inode, f, op, param); - }return -ENOSYS ; }
@@ -195,9 +193,8 @@ static int tty_read(struct file *f, int timeout) elapsed = (1000000 * (now.tv_sec - start.tv_sec) + now.tv_usec - start.tv_usec); -if (elapsed > timeout) { +if (elapsed > timeout)break ; - }set_current_state (TASK_INTERRUPTIBLE );schedule_timeout (((timeout - elapsed) *HZ ) /10000 );
@@ -207,9 +204,8 @@ static int tty_read(struct file *f, int timeout)unsigned char ch; f->f_pos =0 ; -if (f->f_op->read (f, &ch,1 , &f->f_pos) ==1 ) { +if (f->f_op->read (f, &ch,1 , &f->f_pos) ==1 ) result = ch; - } } }else {/* Device does not support poll, busy wait */
@@ -218,9 +214,8 @@ static int tty_read(struct file *f, int timeout)unsigned char ch; retries++; -if (retries >= timeout) { +if (retries >= timeout)break ; - } f->f_pos =0 ;if (f->f_op->read (f, &ch,1 , &f->f_pos) ==1 ) {
@@ -332,7 +327,7 @@ static struct serial_data serial_read(struct file *f, int timeout) length++;if (data <0 ) { -printk ("serial2002 error\n" ); +printk (KERN_ERR "serial2002 error\n" );break ; }else if (data &0x80 ) { result.value = (result.value <<7 ) | (data &0x7f );
@@ -403,7 +398,7 @@ static void serial_2002_open(struct comedi_device *dev)sprintf (port,"/dev/ttyS%d" , devpriv->port); devpriv->tty =filp_open (port,0 ,O_RDWR );if (IS_ERR (devpriv->tty)) { -printk ("serial_2002: file open error = %ld\n" , +printk (KERN_ERR "serial_2002: file open error = %ld\n" ,PTR_ERR (devpriv->tty)); }else { struct config_t {
@@ -413,34 +408,37 @@ static void serial_2002_open(struct comedi_device *dev)int min;int max; }; +struct config_data_t { +struct config_t dig_in_config[32 ]; +struct config_t dig_out_config[32 ]; +struct config_t chan_in_config[32 ]; +struct config_t chan_out_config[32 ]; + } *config_data =NULL ; -struct config_t dig_in_config[32 ]; -struct config_t dig_out_config[32 ]; -struct config_t chan_in_config[32 ]; -struct config_t chan_out_config[32 ];int i; + config_data =kmalloc (sizeof (struct config_data_t ),GFP_KERNEL );for (i =0 ; i <32 ; i++) { - dig_in_config[i].kind =0 ; - dig_in_config[i].bits =0 ; - dig_in_config[i].min =0 ; - dig_in_config[i].max =0 ; - dig_out_config[i].kind =0 ; - dig_out_config[i].bits =0 ; - dig_out_config[i].min =0 ; - dig_out_config[i].max =0 ; - chan_in_config[i].kind =0 ; - chan_in_config[i].bits =0 ; - chan_in_config[i].min =0 ; - chan_in_config[i].max =0 ; - chan_out_config[i].kind =0 ; - chan_out_config[i].bits =0 ; - chan_out_config[i].min =0 ; - chan_out_config[i].max =0 ; + config_data->dig_in_config[i].kind =0 ; + config_data->dig_in_config[i].bits =0 ; + config_data->dig_in_config[i].min =0 ; + config_data->dig_in_config[i].max =0 ; + config_data->dig_out_config[i].kind =0 ; + config_data->dig_out_config[i].bits =0 ; + config_data->dig_out_config[i].min =0 ; + config_data->dig_out_config[i].max =0 ; + config_data->chan_in_config[i].kind =0 ; + config_data->chan_in_config[i].bits =0 ; + config_data->chan_in_config[i].min =0 ; + config_data->chan_in_config[i].max =0 ; + config_data->chan_out_config[i].kind =0 ; + config_data->chan_out_config[i].bits =0 ; + config_data->chan_out_config[i].min =0 ; + config_data->chan_out_config[i].max =0 ; }tty_setspeed (devpriv->tty, devpriv->speed); -poll_channel (devpriv->tty,31 );/* Start reading configuration */ +poll_channel (devpriv->tty,31 );/* Start reading configuration*/ while (1 ) {struct serial_data data;
@@ -456,118 +454,91 @@ static void serial_2002_open(struct comedi_device *dev) kind = (data.value >>5 ) &0x7 ; command = (data.value >>8 ) &0x3 ;switch (kind) { -case 1 :{ - cur_config = dig_in_config; - } +case 1 : + cur_config = + config_data->dig_in_config;break ; -case 2 :{ - cur_config = dig_out_config; - } +case 2 : + cur_config = + config_data->dig_out_config;break ; -case 3 :{ - cur_config = chan_in_config; - } +case 3 : + cur_config = + config_data->chan_in_config;break ; -case 4 :{ - cur_config = chan_out_config; - } +case 4 : + cur_config = + config_data->chan_out_config;break ; -case 5 :{ - cur_config = chan_in_config; - } +case 5 : + cur_config = + config_data->chan_in_config;break ; }if (cur_config) { cur_config[channel].kind = kind;switch (command) { -case 0 :{ - cur_config[channel].bits - = - (data.value >>10 ) & -0x3f ; - } +case 0 : + cur_config[channel].bits = + (data.value >>10 ) &0x3f ;break ;case 1 :{ -int unit, sign, min; - unit = - (data.value >>10 ) & -0x7 ; - sign = - (data.value >>13 ) & -0x1 ; - min = - (data.value >>14 ) & -0xfffff ; - -switch (unit) { -case 0 :{ - min = - min - * -1000000 ; - } -break ; -case 1 :{ - min = - min - * -1000 ; - } -break ; -case 2 :{ - min = - min - *1 ; - } -break ; - } -if (sign) { - min = -min; - } - cur_config[channel].min - = min; +int unit, sign, min; + unit = + (data.value >>10 ) & +0x7 ; + sign = + (data.value >>13 ) & +0x1 ; + min = + (data.value >>14 ) & +0xfffff ; + +switch (unit) { +case 0 : + min = min *1000000 ; +break ; +case 1 : + min = min *1000 ; +break ; +case 2 : + min = min *1 ; +break ; + } +if (sign) + min = -min; + cur_config[channel].min + = min; }break ;case 2 :{ -int unit, sign, max; - unit = - (data.value >>10 ) & -0x7 ; - sign = - (data.value >>13 ) & -0x1 ; - max = - (data.value >>14 ) & -0xfffff ; - -switch (unit) { -case 0 :{ - max = - max - * -1000000 ; - } -break ; -case 1 :{ - max = - max - * -1000 ; - } -break ; -case 2 :{ - max = - max - *1 ; - } -break ; - } -if (sign) { - max = -max; - } - cur_config[channel].max - = max; +int unit, sign, max; + unit = + (data.value >>10 ) & +0x7 ; + sign = + (data.value >>13 ) & +0x1 ; + max = + (data.value >>14 ) & +0xfffff ; + +switch (unit) { +case 0 : + max = max *1000000 ; +break ; +case 1 : + max = max *1000 ; +break ; +case 2 : + max = max *1 ; +break ; + } +if (sign) + max = -max; + cur_config[channel].max + = max; }break ; }
@@ -582,42 +553,36 @@ static void serial_2002_open(struct comedi_device *dev)int kind =0 ;switch (i) { -case 0 :{ - c = dig_in_config; - mapping = devpriv->digital_in_mapping; - kind =1 ; - } +case 0 : + c = config_data->dig_in_config; + mapping = devpriv->digital_in_mapping; + kind =1 ;break ; -case 1 :{ - c = dig_out_config; - mapping = devpriv->digital_out_mapping; - kind =2 ; - } +case 1 : + c = config_data->dig_out_config; + mapping = devpriv->digital_out_mapping; + kind =2 ;break ; -case 2 :{ - c = chan_in_config; - mapping = devpriv->analog_in_mapping; - range = devpriv->in_range; - kind =3 ; - } +case 2 : + c = config_data->chan_in_config; + mapping = devpriv->analog_in_mapping; + range = devpriv->in_range; + kind =3 ;break ; -case 3 :{ - c = chan_out_config; - mapping = devpriv->analog_out_mapping; - range = devpriv->out_range; - kind =4 ; - } +case 3 : + c = config_data->chan_out_config; + mapping = devpriv->analog_out_mapping; + range = devpriv->out_range; + kind =4 ;break ; -case 4 :{ - c = chan_in_config; - mapping = devpriv->encoder_in_mapping; - range = devpriv->in_range; - kind =5 ; - } +case 4 : + c = config_data->chan_in_config; + mapping = devpriv->encoder_in_mapping; + range = devpriv->in_range; + kind =5 ;break ; -default :{ - c =0 ; - } +default : + c =0 ;break ; }if (c) {
@@ -628,22 +593,17 @@ static void serial_2002_open(struct comedi_device *dev)int j, chan;for (chan =0 , j =0 ; j <32 ; j++) { -if (c[j].kind == kind) { +if (c[j].kind == kind) chan++; - } } s = &dev->subdevices[i]; s->n_chan = chan; s->maxdata =0 ; -if (s->maxdata_list) { -kfree (s->maxdata_list); - } +kfree (s->maxdata_list); s->maxdata_list = maxdata_list =kmalloc (sizeof (unsigned int ) * s->n_chan,GFP_KERNEL ); -if (s->range_table_list) { -kfree (s->range_table_list); - } +kfree (s->range_table_list);if (range) { s->range_table =0 ; s->range_table_list = range_table_list =
@@ -654,9 +614,8 @@ static void serial_2002_open(struct comedi_device *dev) }for (chan =0 , j =0 ; j <32 ; j++) {if (c[j].kind == kind) { -if (mapping) { +if (mapping) mapping[chan] = j; - }if (range) { range[j].length =1 ; range[j].range.min =
@@ -664,9 +623,7 @@ static void serial_2002_open(struct comedi_device *dev) range[j].range.max = c[j].max; range_table_list[chan] = - (const struct -comedi_lrange *) - &range[j]; + (const struct comedi_lrange *) &range[j]; } maxdata_list[chan] = ((long long )1 << c[j].bits)
@@ -676,14 +633,14 @@ static void serial_2002_open(struct comedi_device *dev) } } } +kfree (config_data); } }static void serial_2002_close (struct comedi_device *dev) { -if (!IS_ERR (devpriv->tty) && (devpriv->tty !=0 )) { +if (!IS_ERR (devpriv->tty) && (devpriv->tty !=0 ))filp_close (devpriv->tty,0 ); - } } static int serial2002_di_rinsn(struct comedi_device *dev,
@@ -700,9 +657,8 @@ static int serial2002_di_rinsn(struct comedi_device *dev,poll_digital (devpriv->tty, chan);while (1 ) { read =serial_read (devpriv->tty,1000 ); -if (read.kind != is_digital || read.index == chan) { +if (read.kind != is_digital || read.index == chan)break ; - } } data[n] = read.value; }
@@ -742,9 +698,8 @@ static int serial2002_ai_rinsn(struct comedi_device *dev,poll_channel (devpriv->tty, chan);while (1 ) { read =serial_read (devpriv->tty,1000 ); -if (read.kind != is_channel || read.index == chan) { +if (read.kind != is_channel || read.index == chan)break ; - } } data[n] = read.value; }
@@ -778,9 +733,8 @@ static int serial2002_ao_rinsn(struct comedi_device *dev,int n;int chan =CR_CHAN (insn->chanspec); -for (n =0 ; n < insn->n; n++) { +for (n =0 ; n < insn->n; n++) data[n] = devpriv->ao_readback[chan]; - }return n; }
@@ -799,9 +753,8 @@ static int serial2002_ei_rinsn(struct comedi_device *dev,poll_channel (devpriv->tty, chan);while (1 ) { read =serial_read (devpriv->tty,1000 ); -if (read.kind != is_channel || read.index == chan) { +if (read.kind != is_channel || read.index == chan)break ; - } } data[n] = read.value; }
@@ -813,16 +766,15 @@ static int serial2002_attach(struct comedi_device *dev, {struct comedi_subdevice *s; -printk ("comedi%d: serial2002: " , dev->minor); dev->board_name = thisboard->name; -if (alloc_private (dev,sizeof (struct serial2002_private )) <0 ) { +if (alloc_private (dev,sizeof (struct serial2002_private )) <0 )return -ENOMEM ; - } dev->open = serial_2002_open; dev->close = serial_2002_close; devpriv->port = it->options[0 ]; devpriv->speed = it->options[1 ]; -printk ("/dev/ttyS%d @ %d\n" , devpriv->port, devpriv->speed); +printk (KERN_NOTICE "comedi%d: serial2002: /dev/ttyS%d @ %d\n" , + dev->minor, devpriv->port, devpriv->speed);if (alloc_subdevices (dev,5 ) <0 )return -ENOMEM ;
@@ -881,15 +833,11 @@ static int serial2002_detach(struct comedi_device *dev)struct comedi_subdevice *s;int i; -printk ("comedi%d: serial2002: remove\n" , dev->minor); +printk (KERN_NOTICE "comedi%d: serial2002: remove\n" , dev->minor);for (i =0 ; i <4 ; i++) { s = &dev->subdevices[i]; -if (s->maxdata_list) { -kfree (s->maxdata_list); - } -if (s->range_table_list) { -kfree (s->range_table_list); - } +kfree (s->maxdata_list); +kfree (s->range_table_list); }return 0 ; }
Signature · 1 line
1.6.2.5
Try changing one thing at a time per patch please.
There's some bugs in here:
drivers/staging/comedi/drivers/serial2002.c static void serial_2002_open(struct comedi_device *dev) · line 419
Quoted 6 lines
drivers/staging/comedi/drivers/serial2002.c +1
-4-struct config_t dig_in_config[32 ]; -struct config_t dig_out_config[32 ]; -struct config_t chan_in_config[32 ]; -struct config_t chan_out_config[32 ];int i; + config_data =kmalloc (sizeof (struct config_data_t ),GFP_KERNEL );
Shouldn't that be:
config_data = kmalloc(sizeof(struct config_data_t)*32, GFP_KERNEL);
Otherwise you overflow your buffer here:
Quoted 25 lines
drivers/staging/comedi/drivers/serial2002.c +7
-16for (i =0 ; i <32 ; i++) { - dig_in_config[i].kind =0 ; - dig_in_config[i].bits =0 ; - dig_in_config[i].min =0 ; - dig_in_config[i].max =0 ; - dig_out_config[i].kind =0 ; - dig_out_config[i].bits =0 ; - dig_out_config[i].min =0 ; - dig_out_config[i].max =0 ; - chan_in_config[i].kind =0 ; - chan_in_config[i].bits =0 ; - chan_in_config[i].min =0 ; - chan_in_config[i].max =0 ; - chan_out_config[i].kind =0 ; - chan_out_config[i].bits =0 ; - chan_out_config[i].min =0 ; - chan_out_config[i].max =0 ; + config_data->dig_in_config[i].kind =0 ; + config_data->dig_in_config[i].bits =0 ; + config_data->dig_in_config[i].min =0 ; + config_data->dig_in_config[i].max =0 ; + config_data->dig_out_config[i].kind =0 ; + config_data->dig_out_config[i].bits =0 ; + config_data->dig_out_config[i].min =0 ;
drivers/staging/comedi/drivers/serial2002.c static void serial_2002_open(struct comedi_device *dev) · line 438
Quoted 10 lines
drivers/staging/comedi/drivers/serial2002.c +9
-0+ config_data->dig_out_config[i].max =0 ; + config_data->chan_in_config[i].kind =0 ; + config_data->chan_in_config[i].bits =0 ; + config_data->chan_in_config[i].min =0 ; + config_data->chan_in_config[i].max =0 ; + config_data->chan_out_config[i].kind =0 ; + config_data->chan_out_config[i].bits =0 ; + config_data->chan_out_config[i].min =0 ; + config_data->chan_out_config[i].max =0 ; }
Or am I mistaken?
thanks,
greg k-h
Quoted 13 lines · On Fri, 9 Oct 2009 14:16:10 -0700 Greg KH wrote:
Try changing one thing at a time per patch please.
There's some bugs in here:
drivers/staging/comedi/drivers/serial2002.c static void serial_2002_open(struct comedi_device *dev) · line 419
Quoted 6 lines
drivers/staging/comedi/drivers/serial2002.c +1
-4-struct config_t dig_in_config[32 ]; -struct config_t dig_out_config[32 ]; -struct config_t chan_in_config[32 ]; -struct config_t chan_out_config[32 ];int i; + config_data =kmalloc (sizeof (struct config_data_t ),GFP_KERNEL );Shouldn't that be:
Quoted 1 line
config_data = kmalloc(sizeof(struct config_data_t)*32, GFP_KERNEL);
The new struct already includes the [32]s.
Quoted 30 lines
Otherwise you overflow your buffer here:
Quoted 29 lines
drivers/staging/comedi/drivers/serial2002.c +11
-16for (i =0 ; i <32 ; i++) { - dig_in_config[i].kind =0 ; - dig_in_config[i].bits =0 ; - dig_in_config[i].min =0 ; - dig_in_config[i].max =0 ; - dig_out_config[i].kind =0 ; - dig_out_config[i].bits =0 ; - dig_out_config[i].min =0 ; - dig_out_config[i].max =0 ; - chan_in_config[i].kind =0 ; - chan_in_config[i].bits =0 ; - chan_in_config[i].min =0 ; - chan_in_config[i].max =0 ; - chan_out_config[i].kind =0 ; - chan_out_config[i].bits =0 ; - chan_out_config[i].min =0 ; - chan_out_config[i].max =0 ; + config_data->dig_in_config[i].kind =0 ; + config_data->dig_in_config[i].bits =0 ; + config_data->dig_in_config[i].min =0 ; + config_data->dig_in_config[i].max =0 ; + config_data->dig_out_config[i].kind =0 ; + config_data->dig_out_config[i].bits =0 ; + config_data->dig_out_config[i].min =0 ; + config_data->dig_out_config[i].max =0 ; + config_data->chan_in_config[i].kind =0 ; + config_data->chan_in_config[i].bits =0 ; + config_data->chan_in_config[i].min =0 ;
Quoted 8 lines
drivers/staging/comedi/drivers/serial2002.c static void serial_2002_open(struct comedi_device *dev) · line 438
Quoted 6 lines
drivers/staging/comedi/drivers/serial2002.c +5
-0+ config_data->chan_in_config[i].max =0 ; + config_data->chan_out_config[i].kind =0 ; + config_data->chan_out_config[i].bits =0 ; + config_data->chan_out_config[i].min =0 ; + config_data->chan_out_config[i].max =0 ; }Or am I mistaken?
yep.
---
~Randy
Quoted 17 lines · Randy Dunlap
Quoted 13 lines · On Fri, 9 Oct 2009 14:16:10 -0700 Greg KH wrote:
Try changing one thing at a time per patch please.
There's some bugs in here:
drivers/staging/comedi/drivers/serial2002.c static void serial_2002_open(struct comedi_device *dev) · line 419
Quoted 6 lines
drivers/staging/comedi/drivers/serial2002.c +1
-4-struct config_t dig_in_config[32 ]; -struct config_t dig_out_config[32 ]; -struct config_t chan_in_config[32 ]; -struct config_t chan_out_config[32 ];int i; + config_data =kmalloc (sizeof (struct config_data_t ),GFP_KERNEL );Shouldn't that be:
Quoted 1 line
config_data = kmalloc(sizeof(struct config_data_t)*32, GFP_KERNEL);
Quoted 1 line
The new struct already includes the [32]s.
Ah, missed that.
But your other comment about checking the kmalloc is valid. We should not add new calls to kmalloc that doesn't check, let's not _add_ new errors to the code :)
Bruce, care to split this up into individual patches, each doing only one thing, and check for the return value of this call?
thanks,
greg k-h
Quoted 27 lines · Greg KH
Quoted 18 lines · Randy Dunlap
Quoted 5 lines · On Fri, 9 Oct 2009 14:16:10 -0700 Greg KH wrote:
Try changing one thing at a time per patch please.
There's some bugs in here:
Quoted 10 lines
drivers/staging/comedi/drivers/serial2002.c static void serial_2002_open(struct comedi_device *dev) · line 419
Quoted 6 lines
drivers/staging/comedi/drivers/serial2002.c +0
-4-struct config_t dig_in_config[32 ]; -struct config_t dig_out_config[32 ]; -struct config_t chan_in_config[32 ]; -struct config_t chan_out_config[32 ];int i;drivers/staging/comedi/drivers/serial2002.c +1
-0+ config_data =kmalloc (sizeof (struct config_data_t ),GFP_KERNEL );Shouldn't that be:
config_data= kmalloc(sizeof(struct config_data_t)*32,GFP_KERNEL);Quoted 1 line
The new struct already includes the [32]s.
Ah, missed that.
But your other comment about checking the kmalloc is valid. We should not add new calls to kmalloc that doesn't check, let's not _add_ new errors to the code :)
Quoted 6 lines
Bruce, care to split this up into individual patches, each doing only one thing, and check for the return value of this call?
thanks,
greg k-h
Sure. Glad to. A little head scratching will be required for the general cleanups in the .open routing for the kmalloc calls. There are several different types of formatting errors that I have addressed. Those can be bundled as one patch?
Quoted 33 lines · Bruce B
Quoted 30 lines · Greg KH
Quoted 18 lines · Randy Dunlap
Quoted 5 lines · On Fri, 9 Oct 2009 14:16:10 -0700 Greg KH wrote:
Try changing one thing at a time per patch please.
There's some bugs in here:
Quoted 10 lines
drivers/staging/comedi/drivers/serial2002.c static void serial_2002_open(struct comedi_device *dev) · line 419
Quoted 6 lines
drivers/staging/comedi/drivers/serial2002.c +0
-4-struct config_t dig_in_config[32 ]; -struct config_t dig_out_config[32 ]; -struct config_t chan_in_config[32 ]; -struct config_t chan_out_config[32 ];int i;drivers/staging/comedi/drivers/serial2002.c +1
-0+ config_data =kmalloc (sizeof (struct config_data_t ),GFP_KERNEL );Shouldn't that be:
config_data= kmalloc(sizeof(struct config_data_t)*32,GFP_KERNEL);Quoted 1 line
The new struct already includes the [32]s.
Ah, missed that.
But your other comment about checking the kmalloc is valid. We should not add new calls to kmalloc that doesn't check, let's not _add_ new errors to the code :)
Bruce, care to split this up into individual patches, each doing only one thing, and check for the return value of this call?
Quoted 8 lines
Quoted 3 lines
thanks,
greg k-h
Sure. Glad to. A little head scratching will be required for the general cleanups in the .open routing for the kmalloc calls. There are several different types of formatting errors that I have addressed. Those can be bundled as one patch?
Sure, just try to do one logical thing per patch to make it easy to review and say "of course that is obvious, why would I even think of rejecting that patch?"
thanks,
greg k-h
Quoted 13 lines · Greg KH
Try changing one thing at a time per patch please.
There's some bugs in here:
drivers/staging/comedi/drivers/serial2002.c static void serial_2002_open(struct comedi_device *dev) · line 419
Quoted 6 lines
drivers/staging/comedi/drivers/serial2002.c +0
-4-struct config_t dig_in_config[32 ]; -struct config_t dig_out_config[32 ]; -struct config_t chan_in_config[32 ]; -struct config_t chan_out_config[32 ];int i;drivers/staging/comedi/drivers/serial2002.c +1
-0+ config_data =kmalloc (sizeof (struct config_data_t ),GFP_KERNEL );Shouldn't that be:
Quoted 1 line
config_data = kmalloc(sizeof(struct config_data_t)*32, GFP_KERNEL);
The structure already has the [32]'s copied from the original defn's.
If you like... I can still break up the commit into two patches. Also, moving the *32 out isn't a bad idea; were I to break it up, I would likely do so.
Quoted 43 lines
Otherwise you overflow your buffer here:
Quoted 34 lines
for (i = 0; i < 32; i++) {drivers/staging/comedi/drivers/serial2002.c +16
-16- dig_in_config[i].kind =0 ; - dig_in_config[i].bits =0 ; - dig_in_config[i].min =0 ; - dig_in_config[i].max =0 ; - dig_out_config[i].kind =0 ; - dig_out_config[i].bits =0 ; - dig_out_config[i].min =0 ; - dig_out_config[i].max =0 ; - chan_in_config[i].kind =0 ; - chan_in_config[i].bits =0 ; - chan_in_config[i].min =0 ; - chan_in_config[i].max =0 ; - chan_out_config[i].kind =0 ; - chan_out_config[i].bits =0 ; - chan_out_config[i].min =0 ; - chan_out_config[i].max =0 ; + config_data->dig_in_config[i].kind =0 ; + config_data->dig_in_config[i].bits =0 ; + config_data->dig_in_config[i].min =0 ; + config_data->dig_in_config[i].max =0 ; + config_data->dig_out_config[i].kind =0 ; + config_data->dig_out_config[i].bits =0 ; + config_data->dig_out_config[i].min =0 ; + config_data->dig_out_config[i].max =0 ; + config_data->chan_in_config[i].kind =0 ; + config_data->chan_in_config[i].bits =0 ; + config_data->chan_in_config[i].min =0 ; + config_data->chan_in_config[i].max =0 ; + config_data->chan_out_config[i].kind =0 ; + config_data->chan_out_config[i].bits =0 ; + config_data->chan_out_config[i].min =0 ; + config_data->chan_out_config[i].max =0 ;Quoted 1 line
}Or am I mistaken?
thanks,
greg k-h
Quoted 20 lines · Bruce B
Quoted 13 lines · Greg KH
Try changing one thing at a time per patch please.
There's some bugs in here:
drivers/staging/comedi/drivers/serial2002.c static void serial_2002_open(struct comedi_device *dev) · line 419
Quoted 6 lines
drivers/staging/comedi/drivers/serial2002.c +0
-4-struct config_t dig_in_config[32 ]; -struct config_t dig_out_config[32 ]; -struct config_t chan_in_config[32 ]; -struct config_t chan_out_config[32 ];int i;drivers/staging/comedi/drivers/serial2002.c +1
-0+ config_data =kmalloc (sizeof (struct config_data_t ),GFP_KERNEL );Shouldn't that be:
Quoted 1 line
config_data = kmalloc(sizeof(struct config_data_t)*32, GFP_KERNEL);
Quoted 4 lines
The structure already has the [32]'s copied from the original defn's. If you like... I can still break up the commit into two patches. Also, moving the *32 out isn't a bad idea; were I
to break it up, I would likely do so.
I would break it up .. Especially pulling out run time changes from cleanups .. Also neither patch has a sign off line, and this patch actually adds one line over 80 so that at least doesn't go along with your subject..
If your going to respin this patches your first patch "[PATCH] Cleanup:
indent/format errors, printk calls." added some trailing whitespace too. So you could do both..
Daniel
Quoted 15 lines · On Fri, 9 Oct 2009 14:11:38 -0700 Bruce Beare wrote:
--- drivers/staging/comedi/drivers/serial2002.c | 342 +++++++++++--------------- 1 files changed, 145 insertions(+), 197 deletions(-)drivers/staging/comedi/drivers/serial2002.c +3
-0@@ -413,34 +408,37 @@ static void serial_2002_open(struct comedi_device *dev)int min;int max; }; +struct config_data_t { +struct config_t dig_in_config[32 ]; +struct config_t dig_out_config[32 ];
drivers/staging/comedi/drivers/serial2002.c static void serial_2002_open(struct comedi_device *dev) · line 419
Quoted 10 lines
drivers/staging/comedi/drivers/serial2002.c +4
-4+struct config_t chan_in_config[32 ]; +struct config_t chan_out_config[32 ]; + } *config_data =NULL ; -struct config_t dig_in_config[32 ]; -struct config_t dig_out_config[32 ]; -struct config_t chan_in_config[32 ]; -struct config_t chan_out_config[32 ];int i; + config_data =kmalloc (sizeof (struct config_data_t ),GFP_KERNEL );
what happens when the kmalloc() fails??
Quoted 25 lines
drivers/staging/comedi/drivers/serial2002.c +7
-16for (i =0 ; i <32 ; i++) { - dig_in_config[i].kind =0 ; - dig_in_config[i].bits =0 ; - dig_in_config[i].min =0 ; - dig_in_config[i].max =0 ; - dig_out_config[i].kind =0 ; - dig_out_config[i].bits =0 ; - dig_out_config[i].min =0 ; - dig_out_config[i].max =0 ; - chan_in_config[i].kind =0 ; - chan_in_config[i].bits =0 ; - chan_in_config[i].min =0 ; - chan_in_config[i].max =0 ; - chan_out_config[i].kind =0 ; - chan_out_config[i].bits =0 ; - chan_out_config[i].min =0 ; - chan_out_config[i].max =0 ; + config_data->dig_in_config[i].kind =0 ; + config_data->dig_in_config[i].bits =0 ; + config_data->dig_in_config[i].min =0 ; + config_data->dig_in_config[i].max =0 ; + config_data->dig_out_config[i].kind =0 ; + config_data->dig_out_config[i].bits =0 ; + config_data->dig_out_config[i].min =0 ;
drivers/staging/comedi/drivers/serial2002.c static void serial_2002_open(struct comedi_device *dev) · line 438
Quoted 10 lines
drivers/staging/comedi/drivers/serial2002.c +9
-0+ config_data->dig_out_config[i].max =0 ; + config_data->chan_in_config[i].kind =0 ; + config_data->chan_in_config[i].bits =0 ; + config_data->chan_in_config[i].min =0 ; + config_data->chan_in_config[i].max =0 ; + config_data->chan_out_config[i].kind =0 ; + config_data->chan_out_config[i].bits =0 ; + config_data->chan_out_config[i].min =0 ; + config_data->chan_out_config[i].max =0 ; }
---
~Randy
Quoted 23 lines · Randy Dunlap
Quoted 21 lines · On Fri, 9 Oct 2009 14:11:38 -0700 Bruce Beare wrote:
---
drivers/staging/comedi/drivers/serial2002.c| 342 ++++++++++
+---------------1 files changed, 145 insertions(+), 197 deletions(-)drivers/staging/comedi/drivers/serial2002.c +6
-0@@ -413,34 +408,37 @@ static void serial_2002_open(struct comedi_device *dev)int min;int max; }; +struct config_data_t { +struct config_t dig_in_config[32 ]; +struct config_t dig_out_config[32 ]; +struct config_t chan_in_config[32 ]; +struct config_t chan_out_config[32 ]; + } *config_data =NULL ;
Quoted 8 lines
drivers/staging/comedi/drivers/serial2002.c static void serial_2002_open(struct comedi_device *dev) · line 419
Quoted 6 lines
drivers/staging/comedi/drivers/serial2002.c +1
-4-struct config_t dig_in_config[32 ]; -struct config_t dig_out_config[32 ]; -struct config_t chan_in_config[32 ]; -struct config_t chan_out_config[32 ];int i; + config_data =kmalloc (sizeof (struct config_data_t ),GFP_KERNEL );what happens when the
kmalloc()fails??
Nothing good. The driver ignores the return code in numerous places and the open routine in this case is defined to be a void return. I considered it to be a general cleanup subject for this driver at a later date.
Quoted 41 lines
Quoted 27 lines
drivers/staging/comedi/drivers/serial2002.c +7
-16for (i =0 ; i <32 ; i++) { - dig_in_config[i].kind =0 ; - dig_in_config[i].bits =0 ; - dig_in_config[i].min =0 ; - dig_in_config[i].max =0 ; - dig_out_config[i].kind =0 ; - dig_out_config[i].bits =0 ; - dig_out_config[i].min =0 ; - dig_out_config[i].max =0 ; - chan_in_config[i].kind =0 ; - chan_in_config[i].bits =0 ; - chan_in_config[i].min =0 ; - chan_in_config[i].max =0 ; - chan_out_config[i].kind =0 ; - chan_out_config[i].bits =0 ; - chan_out_config[i].min =0 ; - chan_out_config[i].max =0 ; + config_data->dig_in_config[i].kind =0 ; + config_data->dig_in_config[i].bits =0 ; + config_data->dig_in_config[i].min =0 ; + config_data->dig_in_config[i].max =0 ; + config_data->dig_out_config[i].kind =0 ; + config_data->dig_out_config[i].bits =0 ; + config_data->dig_out_config[i].min =0 ;drivers/staging/comedi/drivers/serial2002.c static void serial_2002_open(struct comedi_device *dev) · line 438
Quoted 10 lines
drivers/staging/comedi/drivers/serial2002.c +9
-0+ config_data->dig_out_config[i].max =0 ; + config_data->chan_in_config[i].kind =0 ; + config_data->chan_in_config[i].bits =0 ; + config_data->chan_in_config[i].min =0 ; + config_data->chan_in_config[i].max =0 ; + config_data->chan_out_config[i].kind =0 ; + config_data->chan_out_config[i].bits =0 ; + config_data->chan_out_config[i].min =0 ; + config_data->chan_out_config[i].max =0 ; }---
~Randy
Quoted 36 lines · On Fri, 9 Oct 2009 14:29:19 -0700 Bruce B wrote:
Quoted 24 lines · Randy Dunlap
Quoted 22 lines · On Fri, 9 Oct 2009 14:11:38 -0700 Bruce Beare wrote:
---
drivers/staging/comedi/drivers/serial2002.c| 342 ++++++++++
+---------------1 files changed, 145 insertions(+), 197 deletions(-)drivers/ renamed from drivers/staging/comedi/drivers/serial2002.c +0
-0
staging/comedi/drivers/serial2002.c
index a219679..0232186 100644drivers/staging/comedi/drivers/serial2002.c +6
-0@@ -413,34 +408,37 @@ static void serial_2002_open(struct comedi_device *dev)int min;int max; }; +struct config_data_t { +struct config_t dig_in_config[32 ]; +struct config_t dig_out_config[32 ]; +struct config_t chan_in_config[32 ]; +struct config_t chan_out_config[32 ]; + } *config_data =NULL ;Quoted 8 lines
drivers/staging/comedi/drivers/serial2002.c static void serial_2002_open(struct comedi_device *dev) · line 419
Quoted 6 lines
drivers/staging/comedi/drivers/serial2002.c +1
-4-struct config_t dig_in_config[32 ]; -struct config_t dig_out_config[32 ]; -struct config_t chan_in_config[32 ]; -struct config_t chan_out_config[32 ];int i; + config_data =kmalloc (sizeof (struct config_data_t ),GFP_KERNEL );what happens when the
kmalloc()fails??
Quoted 4 lines
Nothing good. The driver ignores the return code in numerous places and the open routine in this case is defined to be a void return. I considered it to be a general cleanup subject for this driver at a later date.
I would say sooner than later.
Quoted 27 lines
Quoted 27 lines
Quoted 27 lines
drivers/staging/comedi/drivers/serial2002.c +9
-16for (i =0 ; i <32 ; i++) { - dig_in_config[i].kind =0 ; - dig_in_config[i].bits =0 ; - dig_in_config[i].min =0 ; - dig_in_config[i].max =0 ; - dig_out_config[i].kind =0 ; - dig_out_config[i].bits =0 ; - dig_out_config[i].min =0 ; - dig_out_config[i].max =0 ; - chan_in_config[i].kind =0 ; - chan_in_config[i].bits =0 ; - chan_in_config[i].min =0 ; - chan_in_config[i].max =0 ; - chan_out_config[i].kind =0 ; - chan_out_config[i].bits =0 ; - chan_out_config[i].min =0 ; - chan_out_config[i].max =0 ; + config_data->dig_in_config[i].kind =0 ; + config_data->dig_in_config[i].bits =0 ; + config_data->dig_in_config[i].min =0 ; + config_data->dig_in_config[i].max =0 ; + config_data->dig_out_config[i].kind =0 ; + config_data->dig_out_config[i].bits =0 ; + config_data->dig_out_config[i].min =0 ; + config_data->dig_out_config[i].max =0 ; + config_data->chan_in_config[i].kind =0 ;
Quoted 8 lines
Quoted 8 lines
drivers/staging/comedi/drivers/serial2002.c static void serial_2002_open(struct comedi_device *dev) · line 438
Quoted 8 lines
drivers/staging/comedi/drivers/serial2002.c +7
-0+ config_data->chan_in_config[i].bits =0 ; + config_data->chan_in_config[i].min =0 ; + config_data->chan_in_config[i].max =0 ; + config_data->chan_out_config[i].kind =0 ; + config_data->chan_out_config[i].bits =0 ; + config_data->chan_out_config[i].min =0 ; + config_data->chan_out_config[i].max =0 ; }
---
~Randy
drivers/staging/comedi/drivers/serial2002.c static void serial_2002_open(struct comedi_device *dev) · line 419
Quoted 6 lines · Bruce Beare
drivers/staging/comedi/drivers/serial2002.c +1
-4-struct config_t dig_in_config[32 ]; -struct config_t dig_out_config[32 ]; -struct config_t chan_in_config[32 ]; -struct config_t chan_out_config[32 ];int i; + config_data =kmalloc (sizeof (struct config_data_t ),GFP_KERNEL );
And possibly switch this to kzalloc and remove the for below. (As a separate patch.)
Quoted 33 lines
drivers/staging/comedi/drivers/serial2002.c +16
-16for (i =0 ; i <32 ; i++) { - dig_in_config[i].kind =0 ; - dig_in_config[i].bits =0 ; - dig_in_config[i].min =0 ; - dig_in_config[i].max =0 ; - dig_out_config[i].kind =0 ; - dig_out_config[i].bits =0 ; - dig_out_config[i].min =0 ; - dig_out_config[i].max =0 ; - chan_in_config[i].kind =0 ; - chan_in_config[i].bits =0 ; - chan_in_config[i].min =0 ; - chan_in_config[i].max =0 ; - chan_out_config[i].kind =0 ; - chan_out_config[i].bits =0 ; - chan_out_config[i].min =0 ; - chan_out_config[i].max =0 ; + config_data->dig_in_config[i].kind =0 ; + config_data->dig_in_config[i].bits =0 ; + config_data->dig_in_config[i].min =0 ; + config_data->dig_in_config[i].max =0 ; + config_data->dig_out_config[i].kind =0 ; + config_data->dig_out_config[i].bits =0 ; + config_data->dig_out_config[i].min =0 ; + config_data->dig_out_config[i].max =0 ; + config_data->chan_in_config[i].kind =0 ; + config_data->chan_in_config[i].bits =0 ; + config_data->chan_in_config[i].min =0 ; + config_data->chan_in_config[i].max =0 ; + config_data->chan_out_config[i].kind =0 ; + config_data->chan_out_config[i].bits =0 ; + config_data->chan_out_config[i].min =0 ; + config_data->chan_out_config[i].max =0 ;