sfc: 10Xpress: Initialise pause advertising flags
Subsystems (2)
PATCH 3/3 sfc: 10Xpress: Initialise pause advertising flags
The mdio module now handles reconfiguration of pause advertising through ethtool, but not initialisation. Add the necessary initialisation to tenxpress_phy_init().
Signed-off-by Ben Hutchings <[email protected]>
--- drivers/net/sfc/tenxpress.c | 10 ++++++++++ 1 files changed, 10 insertions(+), 0 deletions(-)
drivers/net/sfc/tenxpress.c +10 -0
@@ -301,6 +301,7 @@ static int tenxpress_init(struct efx_nic *efx)static int tenxpress_phy_init (struct efx_nic *efx) {struct tenxpress_phy_data *phy_data; +u16 old_adv, adv;int rc =0 ; phy_data =kzalloc (sizeof (*phy_data),GFP_KERNEL );
@@ -333,6 +334,15 @@ static int tenxpress_phy_init(struct efx_nic *efx)if (rc <0 ) goto fail; +/* Set pause advertising */ + old_adv =efx_mdio_read (efx,MDIO_MMD_AN ,MDIO_AN_ADVERTISE ); + adv = ((old_adv & ~(ADVERTISE_PAUSE_CAP |ADVERTISE_PAUSE_ASYM )) | +mii_advertise_flowctrl (efx->wanted_fc)); +if (adv != old_adv) { +efx_mdio_write (efx,MDIO_MMD_AN ,MDIO_AN_ADVERTISE , adv); +mdio45_nway_restart (&efx->mdio); + } +if (efx->phy_type ==PHY_TYPE_SFT9001B ) { rc =device_create_file (&efx->pci_dev->dev, &dev_attr_phy_short_reach);
Signature · 3 lines
Ben Hutchings, Senior Software Engineer, Solarflare Communications Not speaking for my employer; that's the marketing department's job. They asked us to note that Solarflare product names are trademarked.
From: Ben Hutchings <[email protected]>
Date: Mon, 12 Oct 2009 20:27:07 +0100
Quoted 5 lines
The mdio module now handles reconfiguration of pause advertising through ethtool, but not initialisation. Add the necessary initialisation to
tenxpress_phy_init().Signed-off-by Ben Hutchings <[email protected]>
Applied to net-next-2.6
Thanks!