Intel DP55KG BIOS Bug (reboot hangs, is Intel aware of the problem?)
Hi,
I have tried the following kernel parameters with '*' and reboot=b, reboot=h and reboot=s.
-----------------------------------------------------------------------
Rebooting
reboot=b[ios] | t[riple] | k[bd] | a[cpi] | e[fi] [, [w]arm | [c]old]
* bios Use the CPU reboot vector for warm reset
warm Don't set the cold reboot flag
cold Set the cold reboot flag
triple Force a triple fault (init)
* kbd Use the keyboard controller. cold reset (default)
acpi Use the ACPI RESET_REG in the FADT. If ACPI is not configured or the
ACPI reset does not work, the reboot path attempts the reset using the keyboard controller.
* efi Use efi reset_system runtime service. If EFI is not configured or the
EFI reset does not work, the reboot path attempts the reset using the keyboard controller.
Using warm reset will be much faster especially on big memory systems because the BIOS will not go through the memory check. Disadvantage is that not all hardware will be completely reinitialized on reboot so there may be boot problems on some systems.
* reboot=force
None of which work.
-----------------------------------------------------------------------
It appears earlier Intel boards also suffered the same problem:
Subject: Re: Machine restart doesn't work - Intel 965G, 2.6.19-rc2
http://lkml.indiana.edu/hypermail/linux/kernel/0610.2/2215.html
Are those at Intel aware of this problem?
I have tried many different options/settings, nothing seems to work.
All workaround are unsuccessful.
It appears the dmidecode is requested for these sorts of problems, that is available here:
http://home.comcast.net/~jpiszcz/20091014/dmidecode.txt
Are there any other workarounds until Intel comes out with a patch/new BIOS? Aside from shutting the system off and using wake on lan?
Justin.
H. Peter Anvin
reviewerQuoted 5 lines · Justin Piszcz
Hi,
I have tried the following kernel parameters with '*' and reboot=b, reboot=h and reboot=s.
reboot=t (triple), reboot=p (pci) and reboot=a (acpi) would be useful to test, too.
-hpa
Quoted 12 lines · H. Peter Anvin
Quoted 5 lines · Justin Piszcz
Hi,
I have tried the following kernel parameters with '*' and reboot=b, reboot=h and reboot=s.
reboot=t (triple), reboot=p (pci) and reboot=a (acpi) would be useful to test, too.
-hpa
Thanks,
I find it kind of funny I tried the 4-5 options that didn't work first, bad luck?
Here is what worked and what did not and what I ended up using:
reboot=a * SUCCESS
reboot=b * FAIL
reboot=cold * FAIL
reboot=efi * FAIL
reboot=force * FAIL
reboot=h * FAIL
reboot=p * SUCCESS
reboot=s * FAIL
reboot=t * SUCCESS
reboot=warm * FAIL
I am using reboot=a for now, until INTEL releases a BIOS fix for this bug.
Quoted 1 line
From Bryan:
Try each of the following in the reboot= parameter: acpi, smp (32-bit
only), triple, efi, pci, warm, cold, force If one of them works, report it, along with the output from dmidecode and lspci -nn, so a workaround entry can be added.
dmidecode & lspci below--
http://home.comcast.net/~jpiszcz/20091015/dmidecode.txt
http://home.comcast.net/~jpiszcz/20091015/lspci-nn.txt
Justin.
PATCH 1/1 Add quirk for ACPI reboots on Intel DP55KG boards.
Keyboard-based and BIOS-based reboots don't work on Intel DP55KG boards; use ACPI reboots instead.
--- arch/x86/kernel/reboot.c | 23 +++++++++++++++++++++++ 1 files changed, 23 insertions(+), 0 deletions(-)
Justin, could you give this patch a try? It should make the reboot=acpi workaround automatic.
(x86 maintainers CC'd)
arch/x86/kernel/reboot.c +23 -0
@@ -134,6 +134,21 @@ static int __init set_bios_reboot(const struct dmi_system_id *d)return 0 ; } +/* +* Some machines require the "reboot=a" commandline option. +* This quirk makes that automatic. +*/ +static int __init set_acpi_reboot (const struct dmi_system_id *d) +{ +if (reboot_type !=BOOT_ACPI ) { + reboot_type =BOOT_ACPI ; +printk (KERN_INFO "%s series board detected. Selecting ACPI " +"method for reboots.\n" , d->ident); + } +return 0 ; +} + +static struct dmi_system_id __initdata reboot_dmi_table[] = { {/* Handle problems with rebooting on Dell E520's */ .callback = set_bios_reboot,
@@ -259,6 +274,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "SBC-FITPC2"), }, }, + { /* Handle problems with rebooting on Intel DP55KG */ + .callback = set_acpi_reboot, + .ident = "Intel DP55KG", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "DP55KG"), + }, + }, { } };
Signature · 1 line
1.6.3.3
Re: [PATCH] Add quirk for ACPI reboots on Intel DP55KG boards.
Quoted 61 lines · Bryan Donlan
Keyboard-based and BIOS-based reboots don't work on Intel DP55KG boards; use ACPI reboots instead.
Reported-By Justin Piszcz <[email protected]>Cc Thomas Gleixner <[email protected]>Cc Ingo Molnar <[email protected]>Cc "H. Peter Anvin" <[email protected]>Signed-off-by Bryan Donlan <[email protected]>---
arch/x86/kernel/reboot.c| 23 +++++++++++++++++++++++1 files changed, 23 insertions(+), 0 deletions(-)Justin, could you give this patch a try? It should make the reboot=acpi workaround automatic.
(x86 maintainers CC'd)arch/x86/kernel/reboot.c +23
-0@@ -134,6 +134,21 @@ static int __init set_bios_reboot(const struct dmi_system_id *d)return 0 ; } +/* +* Some machines require the "reboot=a" commandline option. +* This quirk makes that automatic. +*/ +static int __init set_acpi_reboot (const struct dmi_system_id *d) +{ +if (reboot_type !=BOOT_ACPI ) { + reboot_type =BOOT_ACPI ; +printk (KERN_INFO "%s series board detected. Selecting ACPI " +"method for reboots.\n" , d->ident); + } +return 0 ; +} + +static struct dmi_system_id __initdata reboot_dmi_table[] = { {/* Handle problems with rebooting on Dell E520's */ .callback = set_bios_reboot,@@ -259,6 +274,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "SBC-FITPC2"), }, }, + { /* Handle problems with rebooting on Intel DP55KG */ + .callback = set_acpi_reboot, + .ident = "Intel DP55KG", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "DP55KG"), + }, + }, { } };Signature · 1 line
1.6.3.3
Hello,
# patch -p1 < /home/jpiszcz/patch patching file arch/x86/kernel/reboot.c Hunk #1 succeeded at 132 (offset -2 lines). Hunk #2 succeeded at 272 (offset -2 lines).
# uname -a Linux p34.internal.lan 2.6.31.3 #8 SMP Wed Oct 14 14:37:37 EDT 2009 x86_64 GNU/Linux
# ls -l /usr/src/linux/.config-* | tail -n 1 -rw-r--r-- 1 root root 45762 2009-10-15 18:31 /usr/src/linux/.config-2.6.31.3-9
Hi,
Thanks for the patch-- tested, but unfortunately it still hanged at the reboot process (when I did not use reboot=a).
I see in the patch:
Quoted 1 line
+ printk(KERN_INFO "%s series board detected. Selecting ACPI
But..
$ dmesg | grep -i 'series board' $
$ uname -a Linux p34.internal.lan 2.6.31.3 #9 SMP Thu Oct 15 18:31:29 EDT 2009 x86_64 GNU/Linux
$ cat /proc/cmdline auto BOOT_IMAGE=2.6.31.3-9 ro root=812 3w-9xxx.use_msi=1
arch/x86/kernel/reboot.c static struct dmi_system_id __initdata reboot_dmi_table[] = { · line 282
Quoted 2 lines
arch/x86/kernel/reboot.c +2
-0+DMI_MATCH (DMI_SYS_VENDOR ,"Intel Corporation" ), + DMI_MATCH(DMI_PRODUCT_NAME, "DP55KG"),
But..
# dmidecode|grep -i dp55
Product Name: DP55KG
Stops at Corp.
# dmidecode|grep -i vendor
Vendor: Intel Corp.
Changed that line to:
+ DMI_MATCH(DMI_SYS_VENDOR, "Intel Corp."),
That did not work either, ideas?
Justin.
Re: [PATCH] Add quirk for ACPI reboots on Intel DP55KG boards.
Quoted 111 lines · Justin Piszcz
Quoted 63 lines · Bryan Donlan
Keyboard-based and BIOS-based reboots don't work on Intel DP55KG boards; use ACPI reboots instead.
Reported-By Justin Piszcz <[email protected]>Cc Thomas Gleixner <[email protected]>Cc Ingo Molnar <[email protected]>Cc "H. Peter Anvin" <[email protected]>Signed-off-by Bryan Donlan <[email protected]>---
arch/x86/kernel/reboot.c| 23 +++++++++++++++++++++++1 files changed, 23 insertions(+), 0 deletions(-)Justin, could you give this patch a try? It should make the reboot=acpi workaround automatic.
(x86 maintainers CC'd)arch/x86/kernel/reboot.c +15
-0@@ -134,6 +134,21 @@ static int __init set_bios_reboot(const struct dmi_system_id *d)return 0 ; } +/* +* Some machines require the "reboot=a" commandline option. +* This quirk makes that automatic. +*/ +static int __init set_acpi_reboot (const struct dmi_system_id *d) +{ +if (reboot_type !=BOOT_ACPI ) { + reboot_type =BOOT_ACPI ; +printk (KERN_INFO "%s series board detected. Selecting ACPI " +"method for reboots.\n" , d->ident); + } +return 0 ; +} + +static struct dmi_system_id __initdata reboot_dmi_table[] = { {/* Handle problems with rebooting on Dell E520's */ .callback =
set_bios_reboot,arch/x86/kernel/reboot.c +8
-0@@ -259,6 +274,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "SBC-FITPC2"), }, }, + { /* Handle problems with rebooting on Intel DP55KG */ + .callback = set_acpi_reboot, + .ident = "Intel DP55KG", + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"Intel Corporation" ), + DMI_MATCH(DMI_PRODUCT_NAME, "DP55KG"), + }, + }, { } };Signature · 2 lines
-- 1.6.3.3Hello,
# patch -p1 < /home/jpiszcz/patch patching file arch/x86/kernel/reboot.c Hunk #1 succeeded at 132 (offset -2 lines). Hunk #2 succeeded at 272 (offset -2 lines).# uname -a Linux p34.internal.lan 2.6.31.3 #8 SMP Wed Oct 14 14:37:37 EDT 2009 x86_64 GNU/Linux# ls -l /usr/src/linux/.config-* | tail -n 1 -rw-r--r-- 1 root root 45762 2009-10-15 18:31 /usr/src/linux/.config-2.6.31.3-9Hi,
Thanks for the patch-- tested, but unfortunately it still hanged at the reboot process (when I did not use reboot=a).
I see in the patch:
Quoted 1 line
+ printk(KERN_INFO "%s series board detected. Selecting ACPI
But..
$ dmesg | grep -i 'series board' $$ uname -a Linux p34.internal.lan 2.6.31.3 #9 SMP Thu Oct 15 18:31:29 EDT 2009 x86_64 GNU/Linux$ cat /proc/cmdline auto BOOT_IMAGE=2.6.31.3-9 ro root=812 3w-9xxx.use_msi=1arch/x86/kernel/reboot.c static struct dmi_system_id __initdata reboot_dmi_table[] = { · line 282
Quoted 2 lines
arch/x86/kernel/reboot.c +2
-0+DMI_MATCH (DMI_SYS_VENDOR ,"Intel Corporation" ), + DMI_MATCH(DMI_PRODUCT_NAME, "DP55KG"),But..
# dmidecode|grep -i dp55
Product Name: DP55KGStops at Corp.
# dmidecode|grep -i vendor
Vendor: Intel Corp.
Quoted 7 lines
Changed that line to:
+DMI_MATCH(DMI_SYS_VENDOR, "Intel Corp."),That did not work either, ideas?
Justin.
Ack, hold a second, I updated the patch/info in the e-mail but did not save it before I rebooted as I am rebooting every 5 minutes.
Trying w/ Intel Corp.
Re: [PATCH] Add quirk for ACPI reboots on Intel DP55KG boards.
Quoted 118 lines · Justin Piszcz
Quoted 114 lines · Justin Piszcz
Quoted 63 lines · Bryan Donlan
Keyboard-based and BIOS-based reboots don't work on Intel DP55KG boards; use ACPI reboots instead.
Reported-By Justin Piszcz <[email protected]>Cc Thomas Gleixner <[email protected]>Cc Ingo Molnar <[email protected]>Cc "H. Peter Anvin" <[email protected]>Signed-off-by Bryan Donlan <[email protected]>---
arch/x86/kernel/reboot.c| 23 +++++++++++++++++++++++1 files changed, 23 insertions(+), 0 deletions(-)Justin, could you give this patch a try? It should make the reboot=acpi workaround automatic.
(x86 maintainers CC'd)arch/x86/kernel/reboot.c +15
-0@@ -134,6 +134,21 @@ static int __init set_bios_reboot(const struct dmi_system_id *d)return 0 ; } +/* +* Some machines require the "reboot=a" commandline option. +* This quirk makes that automatic. +*/ +static int __init set_acpi_reboot (const struct dmi_system_id *d) +{ +if (reboot_type !=BOOT_ACPI ) { + reboot_type =BOOT_ACPI ; +printk (KERN_INFO "%s series board detected. Selecting ACPI " +"method for reboots.\n" , d->ident); + } +return 0 ; +} + +static struct dmi_system_id __initdata reboot_dmi_table[] = { {/* Handle problems with rebooting on Dell E520's */ .callback =
set_bios_reboot,arch/x86/kernel/reboot.c +8
-0@@ -259,6 +274,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "SBC-FITPC2"), }, }, + { /* Handle problems with rebooting on Intel DP55KG */ + .callback = set_acpi_reboot, + .ident = "Intel DP55KG", + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"Intel Corporation" ), + DMI_MATCH(DMI_PRODUCT_NAME, "DP55KG"), + }, + }, { } };Signature · 2 lines
-- 1.6.3.3Hello,
# patch -p1 < /home/jpiszcz/patch patching file arch/x86/kernel/reboot.c Hunk #1 succeeded at 132 (offset -2 lines). Hunk #2 succeeded at 272 (offset -2 lines).# uname -a Linux p34.internal.lan 2.6.31.3 #8 SMP Wed Oct 14 14:37:37 EDT 2009 x86_64 GNU/Linux# ls -l /usr/src/linux/.config-* | tail -n 1 -rw-r--r-- 1 root root 45762 2009-10-15 18:31 /usr/src/linux/.config-2.6.31.3-9Hi,
Thanks for the patch-- tested, but unfortunately it still hanged at the reboot process (when I did not use reboot=a).
I see in the patch:
Quoted 1 line
+ printk(KERN_INFO "%s series board detected. Selecting ACPI
But..
$ dmesg | grep -i 'series board' $$ uname -a Linux p34.internal.lan 2.6.31.3 #9 SMP Thu Oct 15 18:31:29 EDT 2009 x86_64 GNU/Linux$ cat /proc/cmdline auto BOOT_IMAGE=2.6.31.3-9 ro root=812 3w-9xxx.use_msi=1arch/x86/kernel/reboot.c static struct dmi_system_id __initdata reboot_dmi_table[] = { · line 282
Quoted 2 lines
arch/x86/kernel/reboot.c +2
-0+DMI_MATCH (DMI_SYS_VENDOR ,"Intel Corporation" ), + DMI_MATCH(DMI_PRODUCT_NAME, "DP55KG"),But..
# dmidecode|grep -i dp55
Product Name: DP55KGStops at Corp.
# dmidecode|grep -i vendor
Vendor: Intel Corp.Changed that line to:
+DMI_MATCH(DMI_SYS_VENDOR, "Intel Corp."),
Quoted 9 lines
Quoted 4 lines
That did not work either, ideas?
Justin.
Ack, hold a second, I updated the patch/info in the e-mail but did not save it before I rebooted as I am rebooting every 5 minutes.
Trying w/ Intel Corp.
$ dmesg | grep -i series $
Still no match (and still hangs at reboot)...
# cat /usr/src/linux-2.6.31.3/arch/x86/kernel/reboot.c|grep -i intel
{ /* Handle problems with rebooting on Intel DP55KG */
.ident = "Intel DP55KG",
DMI_MATCH(DMI_SYS_VENDOR, "Intel Corp."),Justin.
Re: [PATCH] Add quirk for ACPI reboots on Intel DP55KG boards.
Quoted 9 lines · Justin Piszcz
Still no match (and still hangs at reboot)...
# cat /usr/src/linux-2.6.31.3/arch/x86/kernel/reboot.c|grep -i intel { /* Handle problems with rebooting on Intel DP55KG */ .ident = "Intel DP55KG", DMI_MATCH(DMI_SYS_VENDOR, "Intel Corp."),Justin.
Sorry - bear with me a bit here, it's my first time writing quirks for this :) Try:
DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"), DMI_MATCH(DMI_BOARD_NAME, "DP55KG"),
Re: [PATCH] Add quirk for ACPI reboots on Intel DP55KG boards.
Quoted 9 lines · Bryan Donlan
Quoted 7 lines · Justin Piszcz
Still no match (and still hangs at reboot)...
# cat /usr/src/linux-2.6.31.3/arch/x86/kernel/reboot.c|grep -i intel { /* Handle problems with rebooting on Intel DP55KG */ .ident = "Intel DP55KG", DMI_MATCH(DMI_SYS_VENDOR, "Intel Corp."),
Quoted 8 lines
Quoted 2 lines
Justin.
Sorry - bear with me a bit here, it's my first time writing quirks for this :) Try:
DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),DMI_MATCH(DMI_BOARD_NAME, "DP55KG"),
From dmidecode:
BIOS Information
Vendor: Intel Corp.
I assume you mean:
DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corp."), DMI_MATCH(DMI_BOARD_NAME, "DP55KG"),
Did not work.
Trying your revised suggestion below:
Quoted 2 lines
DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),DMI_MATCH(DMI_BOARD_NAME, "DP55KG"),
Up to build #13 now, trying a reboot, but does not look good...
$ dmesg | grep -i series $
$ uname -a Linux p34.internal.lan 2.6.31.3 #13 SMP Thu Oct 15 19:23:31 EDT 2009 x86_64 GNU/Linux
Here goes..
Same, all methods fail, :(
Justin.
Re: [PATCH] Add quirk for ACPI reboots on Intel DP55KG boards.
Quoted 3 lines · Justin Piszcz
Same, all methods fail, :(
Justin.
Was there a message on dmesg about setting the reboot type? dmesg | grep 'series board detected'
If not, please dump the DMI identification values Linux is using like so:
for i in /sys/class/dmi/id/*; do if [ -f $i ]; then echo -n "$i \""; cat $i | tr -d '\n'; echo '"'; fi; done
Re: [PATCH] Add quirk for ACPI reboots on Intel DP55KG boards.
Quoted 4 lines · Bryan Donlan
Quoted 2 lines · Justin Piszcz
Same, all methods fail, :(
Quoted 9 lines
Quoted 1 line
Justin.
Was there a message on dmesg about setting the reboot type? dmesg | grep 'series board detected'
If not, please dump the DMI identification values Linux is using like so:
for i in/sys/class/dmi/id/*; do if [ -f $i ]; then echo -n "$i \""; cat $i | tr -d '\n'; echo '"'; fi; done
Here you go:
# for i in /sys/class/dmi/id/*; do if [ -f $i ]; then echo -n "$i \""; cat $i | tr -d '\n'; echo '"'; fi; done /sys/class/dmi/id/bios_date "09/28/2009" /sys/class/dmi/id/bios_vendor "Intel Corp." /sys/class/dmi/id/bios_version "KGIBX10J.86A.3822.2009.0928.1349" /sys/class/dmi/id/board_asset_tag "Base Board Asset Tag" /sys/class/dmi/id/board_name "DP55KG" /sys/class/dmi/id/board_serial "XXXXXXXXXXXX" /sys/class/dmi/id/board_vendor "Intel Corporation" /sys/class/dmi/id/board_version "AAE47218-403" /sys/class/dmi/id/chassis_asset_tag " " /sys/class/dmi/id/chassis_serial " " /sys/class/dmi/id/chassis_type "2" /sys/class/dmi/id/chassis_vendor " " /sys/class/dmi/id/chassis_version " " /sys/class/dmi/id/modalias "dmi:bvnIntelCorp.:bvrKGIBX10J.86A.3822.2009.0928.1349:bd09/28/2009:svn:pn:pvr:rvnIntelCorporation:rnDP55KG:rvrAAE47218-403:cvn:ct2:cvr:" /sys/class/dmi/id/product_name " " /sys/class/dmi/id/product_serial " " /sys/class/dmi/id/product_uuid "81BCB172-8BB9-11DE-B5DA-001CC0C81E6F" /sys/class/dmi/id/product_version " " /sys/class/dmi/id/sys_vendor " " /sys/class/dmi/id/uevent "MODALIAS=dmi:bvnIntelCorp.:bvrKGIBX10J.86A.3822.2009.0928.1349:bd09/28/2009:svn:pn:pvr:rvnIntelCorporation:rnDP55KG:rvrAAE47218-403:cvn:ct2:cvr:"
Justin.
H. Peter Anvin
reviewerRe: [PATCH] Add quirk for ACPI reboots on Intel DP55KG boards.
In reply to Justin PiszczThe DMI system name seems to actually be blank:
Handle 0x0006, DMI type 1, 27 bytes
System Information
Manufacturer:
Product Name:
Version:
Serial Number:
As such, I suspect you need DMI_BOARD_VENDOR and DMI_BOARD_NAME:
Handle 0x0007, DMI type 2, 20 bytes
Base Board Information
Manufacturer: Intel Corporation
Product Name: DP55KG
You can double-check by looking at what names Linux uses in /sys/class/dmi/id.
-hpa