ppc/85xx: Fix building NAND_SPL out of tree
PATCH 1/1 ppc/85xx: Fix building NAND_SPL out of tree
We need to source files to exist in the O=<FOO> nand_spl dir when we build out of tree.
--- nand_spl/board/freescale/mpc8536ds/Makefile | 6 ++++++ nand_spl/board/freescale/p1_p2_rdb/Makefile | 6 ++++++ 2 files changed, 12 insertions(+), 0 deletions(-)
nand_spl/board/freescale/mpc8536ds/Makefile +6 -0
@@ -111,6 +111,12 @@ $(obj)tlb_table.c: @rm -f $(obj)tlb_table.c ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c +ifneq ($(OBJTREE), $(SRCTREE)) +$(obj)nand_boot.c: + @rm -f $(obj)nand_boot.c + ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c +endif + ######################################################################### $(obj)%.o: $(obj)%.S
nand_spl/board/freescale/p1_p2_rdb/Makefile +6 -0
@@ -111,6 +111,12 @@ $(obj)tlb_table.c: @rm -f $(obj)tlb_table.c ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c +ifneq ($(OBJTREE), $(SRCTREE)) +$(obj)nand_boot.c: + @rm -f $(obj)nand_boot.c + ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c +endif + ######################################################################### $(obj)%.o: $(obj)%.S
Signature · 1 line
1.6.0.6
PATCH 1/1 ppc/85xx: Fix compiler warning in nand_spl/.../p1_p2_rdb/nand_boot.c
nand_boot.c: In function 'board_init_f':
nand_boot.c:44: warning: 'sys_clk' may be used uninitialized in this function
--- nand_spl/board/freescale/p1_p2_rdb/nand_boot.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
nand_spl/board/freescale/p1_p2_rdb/nand_boot.c +1 -1
@@ -41,7 +41,7 @@ DECLARE_GLOBAL_DATA_PTR;void board_init_f (ulong bootflag) { -uint plat_ratio, bus_clk, sys_clk; +uint plat_ratio, bus_clk, sys_clk =0 ;volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);volatile ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);uint val, temp, sysclk_mask;
Signature · 1 line
1.6.0.6
Kumar Gala
AppliedPATCH 1/1 ppc/85xx: Fix compiler warning in nand_spl/.../p1_p2_rdb/nand_boot.c
Quoted 8 lines · Kumar Gala
nand_boot.c: In function 'board_init_f':
nand_boot.c:44: warning: 'sys_clk' may be used uninitialized in this functionSigned-off-by Kumar Gala <[email protected]>---
nand_spl/board/freescale/p1_p2_rdb/nand_boot.c| 2 +-1 files changed, 1 insertions(+), 1 deletions(-)
applied to 85xx.
- k
Kumar Gala
AppliedPATCH 1/1 ppc/85xx: Fix building NAND_SPL out of tree
In reply to Kumar GalaQuoted 8 lines · Kumar Gala
We need to source files to exist in the O=<FOO>
nand_spldir when we build out of tree.Signed-off-by Kumar Gala <[email protected]>---
nand_spl/board/freescale/mpc8536ds/Makefile | 6 ++++++ nand_spl/board/freescale/p1_p2_rdb/Makefile | 6 ++++++ 2 files changed, 12 insertions(+), 0 deletions(-)
applied to 85xx.
- k