linux-igep2: Fix audio capture, the capture result is always silence
PATCH v2 1/2 linux-igep2: Fix audio capture, the capture result is always silence
From: Enric Balletbo i Serra <[email protected]>
Signed-off-by Enric Balletbo i Serra <[email protected]>
--- conf/machine/include/omap3.inc | 2 +- .../twl-asoc-fix-record.diff | 34 ++++++++++++++++++++ recipes/linux/linux-igep2_2.6.28.10-0.bb | 4 ++ 3 files changed, 39 insertions(+), 1 deletions(-) create mode 100644 recipes/linux/linux-igep2-2.6.28.10-0/twl-asoc-fix-record.diff
conf/machine/include/omap3.inc +1 -1
@@ -1,7 +1,7 @@ require conf/machine/include/tune-cortexa8.inc PREFERRED_PROVIDER_virtual/kernel = "linux-omap" # Increase this everytime you change something in the kernel -MACHINE_KERNEL_PR = "r47" +MACHINE_KERNEL_PR = "r48" KERNEL_IMAGETYPE = "uImage"
recipes/linux/linux-igep2-2.6.28.10-0/twl-asoc-fix-record.diff new file +34 -0
@@ -0,0 +1,34 @@ +From [email protected] Sat Dec 06 02:14:21 2008 +Date: Fri, 5 Dec 2008 16:46:34 -0800 +From: "Steve Sakoman" <[email protected]> +To: "[email protected]" <[email protected]> +Subject: [FYI PATCH] ASOC:TWL4030 Audio capture fix + +A couple of folks have noticed an issue with audio capture -- the +capture result is always silence. + +The patch below is a quick fix for those with this issue. There are +substantial changes to the codec driver that will be trickling down +from ASoC, and they deal with this issue differently. + +So consider this as a bandaid for those who don't want to wait for the +trickle down :-) + +Steve + + +diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c +index ee2f0d3..8b4aafb 100644 +--- a/sound/soc/codecs/twl4030.c ++++ b/sound/soc/codecs/twl4030.c +@@ -45,8 +45,8 @@ static const u8 twl4030_reg[TWL4030_CACHEREGNUM] = { + 0xc3, /* REG_OPTION (0x2) */ + 0x00, /* REG_UNKNOWN (0x3) */ + 0x00, /* REG_MICBIAS_CTL (0x4) */ +- 0x24, /* REG_ANAMICL (0x5) */ +- 0x04, /* REG_ANAMICR (0x6) */ ++ 0x34, /* REG_ANAMICL (0x5) */ ++ 0x14, /* REG_ANAMICR (0x6) */ + 0x0a, /* REG_AVADC_CTL (0x7) */ + 0x00, /* REG_ADCMICSEL (0x8) */ + 0x00, /* REG_DIGMIXING (0x9) */
recipes/linux/linux-igep2_2.6.28.10-0.bb +4 -0
@@ -10,4 +10,8 @@ DEFAULT_PREFERENCE_igep0020 = "1" SRC_URI = "http://downloads.myigep.com/sources/kernel/linux-omap-2.6.28.10-igep0020b-0.tar.gz \ file://defconfig" +SRC_URI_append = " \ + file://twl-asoc-fix-record.diff;patch=1 \ +" + S = "${WORKDIR}/linux-omap-2.6.28.10-igep0020b-0"
Signature · 1 line
1.5.4.3
PATCH v2 2/2 u-boot: add IGEP v2 support to 2009.08 release
From: Enric Balletbo i Serra <[email protected]>
Signed-off-by Enric Balletbo i Serra <[email protected]>
--- conf/machine/igep0020.conf | 2 + ...dd-board-support-for-IGEP-v2-series-rev-B.patch | 1098 ++++++++++++++++++ .../igep0020/update-mach-types.patch | 1206 ++++++++++++++++++++ recipes/u-boot/u-boot_2009.08.bb | 8 +- 4 files changed, 2313 insertions(+), 1 deletions(-) create mode 100644 recipes/u-boot/u-boot-2009.08/igep0020/add-board-support-for-IGEP-v2-series-rev-B.patch create mode 100644 recipes/u-boot/u-boot-2009.08/igep0020/update-mach-types.patch
conf/machine/igep0020.conf +2 -0
@@ -19,6 +19,8 @@ PREFERRED_PROVIDER_virtual/kernel = "linux-igep2" KERNEL_IMAGETYPE = "uImage" +UBOOT_MACHINE = "omap3_igep0020b_config" + IMAGE_FSTYPES += "tar.bz2 ubi" # Guesswork
recipes/u-boot/u-boot-2009.08/igep0020/add-board-support-for-IGEP-v2-series-rev-B.patch new file +1098 -0
1,098 lines not on this page · raw message
recipes/u-boot/u-boot-2009.08/igep0020/update-mach-types.patch new file +1206 -0
1,206 lines not on this page · raw message
recipes/u-boot/u-boot_2009.08.bb +7 -1
@@ -1,11 +1,17 @@ -PR = "r0" +PR = "r1" require u-boot.inc DEFAULT_PREFERENCE = "-1" DEFAULT_PREFERENCE_at91sam9g20ek = "1" +DEFAULT_PREFERENCE_igep0020 = "1" SRC_URI = "ftp://ftp.denx.de/pub/u-boot/u-boot-${PV}.tar.bz2 " +SRC_URI_append_igep0020 = " \ + file://update-mach-types.patch;patch=1 \ + file://add-board-support-for-IGEP-v2-series-rev-B.patch;patch=1 \ +" + TARGET_LDFLAGS = "" inherit base
Signature · 1 line
1.5.4.3