Skip to contentSkip to conversation

U-Boot can't read ext2 filesystem created by Fedora 11

U-Boot Mike Cruse 2 participants 2 messages Oct 27, 2009

lore
Share & tools
lore

Mike Cruse

author
#0 lore raw

Hi,

I am currently going through the bring up of a Freescale MPC8536 based system. We use a SATA hard drive to boot from.

I seem to have a problem reading ext2 filesystems created on a Fedora 11 system. I have checked the FAQ for something related to this.

If I create the filesystem on the 8536 eval system everything seems to work fine. However if I create an ext2 filesystem on my desktop (F11) with mkfs.ext2 then U-Boot cannot read anything. Below are some examples of the responses I get. I am using a Freescale patched U-Boot version 2009.03-rc1.

Regardless of where I created the filesystem it always shows up as ext2 on my desktop.

Any pointers or clues?

Thanks,

Mike

=> sata init
SATA0 (1.5 Gbps)
SATA1 (No RDY)

=> sata part

Partition Map for SATA device 0 -- Partition Type: DOS

Partition Start Sector Num Sectors Type

    1                   63        38555937      83
    2             38556000        38556000      83
    3             77112000        40098240      83

=> ext2ls sata 0:1 /boot
** Can not find directory. **
** Error ext2fs_ls() **

=> ext2ls sata 0:1 /
=>

#1 lore raw

Dear Mike Cruse,

Quoted 3 lines · In message <[email protected]> you wrote:

I seem to have a problem reading ext2 filesystems created on a Fedora 11 system. I have checked the FAQ for something related to this.

You should also have checked the mailing list archives and/or the commit logs. Searching for "ext2" seems not too difficult to me.

You would have found (among other things) this:

	commit 56fdaadc124a8ef9ec0fd8ff578233ec3b1137be
	Author: Weirich, Bernhard <[email protected]>
	Date:   Wed Jun 10 14:00:37 2009 +0200

	    ext2: fix inode size and calculations
Quoted 5 lines

If I create the filesystem on the 8536 eval system everything seems to work fine. However if I create an ext2 filesystem on my desktop (F11) with mkfs.ext2 then U-Boot cannot read anything. Below are some examples of the responses I get. I am using a Freescale patched U-Boot version 2009.03-rc1.

Update.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
You don't have to stay up nights to succeed; you have to  stay  awake
days.