omap3evm: Add board revision function
Subsystems (3)
PATCH 1/1 omap3evm: Add board revision function
Added function to differentiate between the OMAP3EVM revisions. The chip-id of the ethernet PHY is being used for this purpose.
Rev A to D : 0x01150000
Rev >= E : 0x92200000
Signed-off-by Vaibhav Hiremath <[email protected]>
Signed-off-by Ajay Kumar Gupta <[email protected]>
Signed-off-by Sanjeev Premi <[email protected]>
--- arch/arm/mach-omap2/board-omap3evm.c | 33 +++++++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/board.h | 18 ++++++++++++++++ 2 files changed, 51 insertions(+), 0 deletions(-)
arch/arm/mach-omap2/board-omap3evm.c +33 -0
@@ -48,9 +48,40 @@#define OMAP3EVM_ETHR_START 0x2c000000#define OMAP3EVM_ETHR_SIZE 1024 +#define OMAP3EVM_ETHR_ID_REV 0x50#define OMAP3EVM_ETHR_GPIO_IRQ 176#define OMAP3EVM_SMC911X_CS 5 +static u8 omap3_evm_version; + +u8 get_omap3_evm_rev (void ) +{ +return omap3_evm_version; +} +EXPORT_SYMBOL (get_omap3_evm_rev); + +static void __init omap3_evm_get_revision (void ) +{ +void __iomem *ioaddr; +unsigned int smsc_id; + +/* Ethernet PHY ID is stored at ID_REV register */ + ioaddr =ioremap_nocache (OMAP3EVM_ETHR_START ,SZ_1K ); + smsc_id =readl (ioaddr +OMAP3EVM_ETHR_ID_REV ) &0xFFFF0000 ; +iounmap (ioaddr); + +switch (smsc_id) { +/*SMSC9115 chipset*/ +case 0x01150000 : + omap3_evm_version =OMAP3EVM_BOARD_GEN_1 ; +break ; +/*SMSC 9220 chipset*/ +case 0x92200000 : +default : + omap3_evm_version =OMAP3EVM_BOARD_GEN_2 ; + } +} +static struct resource omap3evm_smc911x_resources[] = { [0 ] = { .start =OMAP3EVM_ETHR_START ,
@@ -357,6 +388,8 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {static void __init omap3_evm_init (void ) { +omap3_evm_get_revision (); +omap3_evm_i2c_init ();platform_add_devices (omap3_evm_devices,ARRAY_SIZE (omap3_evm_devices));
arch/arm/plat-omap/include/plat/board.h +18 -0
@@ -14,6 +14,18 @@#include <plat/gpio-switch.h> +/* +* OMAP35x EVM revision +* Run time detection of EVM revision is done by reading Ethernet +* PHY ID - +* GEN_1 = 0x01150000 +* GEN_2 = 0x92200000 +*/ +enum { +OMAP3EVM_BOARD_GEN_1 =0 ,/* EVM Rev between A - D */ +OMAP3EVM_BOARD_GEN_2 ,/* EVM Rev >= Rev E */ +}; +/* Different peripheral ids */ #define OMAP_TAG_CLOCK 0x4f01#define OMAP_TAG_LCD 0x4f05
@@ -157,4 +169,10 @@ extern int omap_board_config_size;/* for TI reference platforms sharing the same debug card */ extern int debug_card_init (u32 addr,unsigned gpio); +/* OMAP3EVM revision */ +#if defined(CONFIG_MACH_OMAP3EVM ) +u8 get_omap3_evm_rev (void ); +#else +#define get_omap3_evm_rev () (-EINVAL) +#endif #endif
Signature · 1 line
1.6.2.4
Tony Lindgren
maintainerPATCH 1/1 omap3evm: Add board revision function
This patch has been applied to the linux-omap
by youw fwiendly patch wobot.
Branch in linux-omap: for-next
Initial commit ID (Likely to change): 35bb10f7c977e01e499546c5754df1c7257b87e1
PatchWorks
http://patchwork.kernel.org/patch/56274/
Git (Likely to change, and takes a while to get mirrored)
http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=35bb10f7c977e01e499546c5754df1c7257b87e1