ARM Add New Board GEC2410 v2
Subsystems (2)
PATCH 1/1 ARM Add New Board GEC2410 v2
Signed-off-by Hui.Tang <[email protected]>
---
total: 0 errors, 0 warnings, 1249 lines checked
0001-ARM-Add-New-Board-GEC2410.patch has no obvious style problems and is ready for submission.
MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 7 + board/gec/gec2410/Makefile | 54 ++++++ board/gec/gec2410/README | 85 +++++++++ board/gec/gec2410/config.mk | 34 ++++ board/gec/gec2410/gec2410.c | 313 +++++++++++++++++++++++++++++++++ board/gec/gec2410/gec2410_mem.h | 118 +++++++++++++ board/gec/gec2410/lowlevel_init.S | 93 ++++++++++ board/gec/gec2410/u-boot-nand.lds | 61 +++++++ cpu/arm920t/s3c24x0/timer.c | 3 +- include/configs/gec2410.h | 249 ++++++++++++++++++++++++++ nand_spl/board/gec/gec2410/Makefile | 103 +++++++++++ nand_spl/board/gec/gec2410/config.mk | 40 +++++ nand_spl/board/gec/gec2410/u-boot.lds | 60 +++++++ 15 files changed, 1224 insertions(+), 1 deletions(-) create mode 100644 board/gec/gec2410/Makefile create mode 100644 board/gec/gec2410/README create mode 100644 board/gec/gec2410/config.mk create mode 100644 board/gec/gec2410/gec2410.c create mode 100644 board/gec/gec2410/gec2410_mem.h create mode 100644 board/gec/gec2410/lowlevel_init.S create mode 100644 board/gec/gec2410/u-boot-nand.lds create mode 100644 include/configs/gec2410.h create mode 100644 nand_spl/board/gec/gec2410/Makefile create mode 100644 nand_spl/board/gec/gec2410/config.mk create mode 100644 nand_spl/board/gec/gec2410/u-boot.lds
MAINTAINERS +4 -0
@@ -429,6 +429,10 @@ Timur Tabi <[email protected]> MPC8349E-mITX MPC8349 MPC8349E-mITX-GP MPC8349 +Hui Tang <[email protected]> + + gec2410 ARM920T + Erik Theisen <[email protected]> W7OLMC PPC4xx
MAKEALL +1 -0
@@ -548,6 +548,7 @@ LIST_ARM9=" \ cp926ejs \ cp946es \ cp966 \ + gec2410 \ imx27lite \ lpd7a400 \ mv88f6281gtw_ge \
Makefile +7 -0
@@ -2951,6 +2951,13 @@ davinci_dm365evm_config : unconfig davinci_dm6467evm_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci +gec2410_config : unconfig + @mkdir -p $(obj)include $(obj)board/gec/gec2410 + @mkdir -p $(obj)nand_spl/board/gec/gec2410 + @echo "RAM_TEXT = 0x33e00000" >> $(obj)board/gec/gec2410/config.tmp + @$(MKCONFIG) $(@:_config=) arm arm920t gec2410 gec s3c24x0 + @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + imx27lite_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
board/gec/gec2410/Makefile new file +54 -0
54 lines not on this page · raw message
board/gec/gec2410/README new file +85 -0
85 lines not on this page · raw message
board/gec/gec2410/config.mk new file +34 -0
@@ -0,0 +1,34 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <[email protected]> +# David Mueller, ELSOFT AG, <[email protected]> +# +# GuangDong Embedded Software Center GEC2410 board with S3C2410X (ARM920T) cpu +# +# see http://www.gd-emb.com/sales_detail/menu-2410.html for more information on GEC2410 +# + +# +# GEC2410 has 1 bank of 64 MB DRAM +# +# 3000'0000 to 3400'0000 +# +# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 +# optionally with a ramdisk at 3080'0000 +# +# we load ourself to 33e0'0000 +# +# download area is 3300'c000 +# + +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +ifndef CONFIG_NAND_SPL +TEXT_BASE = $(RAM_TEXT) +else +TEXT_BASE = 0 +endif + +LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot-nand.lds + +PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/gec/gec2410
board/gec/gec2410/gec2410.c new file +313 -0
313 lines not on this page · raw message
board/gec/gec2410/gec2410_mem.h new file +118 -0
118 lines not on this page · raw message
board/gec/gec2410/lowlevel_init.S new file +93 -0
93 lines not on this page · raw message
board/gec/gec2410/u-boot-nand.lds new file +61 -0
61 lines not on this page · raw message
cpu/arm920t/s3c24x0/timer.c +2 -1
@@ -188,7 +188,8 @@ ulong get_tbclk(void) tbclk = timer_load_val *100 ;#elif defined(CONFIG_SBC2410X ) || \ defined(CONFIG_SMDK2410 ) || \ - defined(CONFIG_VCMA9 ) + defined(CONFIG_VCMA9 ) || \ + defined(CONFIG_GEC2410 ) tbclk =CONFIG_SYS_HZ ;#else # error "tbclk not configured"
include/configs/gec2410.h new file +249 -0
249 lines not on this page · raw message
nand_spl/board/gec/gec2410/Makefile new file +103 -0
103 lines not on this page · raw message
nand_spl/board/gec/gec2410/config.mk new file +40 -0
@@ -0,0 +1,40 @@ +# +# (C) Copyright 2006 +# Stefan Roese, DENX Software Engineering, sr at denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# +# GEC2410 Study Platform (gec2410) board + +# TEXT_BASE for SPL: +# +# On S3C2410 platforms the SPL is located in SRAM@0. +# +TEXT_BASE = 0 + +include $(TOPDIR)/board/$(BOARDDIR)/config.mk + +# PAD_TO used to generate a 4kByte binary needed for the combined image +# -> PAD_TO = TEXT_BASE + 4096 +PAD_TO := 0x00001000 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif
nand_spl/board/gec/gec2410/u-boot.lds new file +60 -0
60 lines not on this page · raw message
Signature · 1 line
1.6.0.4