powerpc/85xx: Kconfig cleanup
Subsystems (2)
PATCH 1/1 powerpc/85xx: Kconfig cleanup
Introduce new FSL_SOC_BOOKE Kconfig to handle both 85xx and QorIQ based chips.
Signed-off-by Kumar Gala <[email protected]>
--- arch/powerpc/platforms/85xx/Kconfig | 11 ++++++----- arch/powerpc/platforms/Kconfig | 2 +- arch/powerpc/platforms/Kconfig.cputype | 17 ++++++++--------- arch/powerpc/platforms/Makefile | 2 +- arch/powerpc/sysdev/fsl_pci.c | 4 ++-- arch/powerpc/sysdev/fsl_soc.c | 2 +- 6 files changed, 19 insertions(+), 19 deletions(-)
arch/powerpc/platforms/85xx/Kconfig +6 -5
@@ -1,6 +1,7 @@ -menuconfig MPC85xx - bool "Machine Type" - depends on PPC_85xx +menuconfig FSL_SOC_BOOKE + bool "Freescale Book-E Machine Type" + depends on PPC_85xx || PPC_BOOK3E + select FSL_SOC select PPC_UDBG_16550 select MPIC select PPC_PCI_CHOICE
@@ -8,7 +9,7 @@ menuconfig MPC85xx select SERIAL_8250_SHARE_IRQ if SERIAL_8250 default y -if MPC85xx +if FSL_SOC_BOOKE config MPC8540_ADS bool "Freescale MPC8540 ADS"
@@ -144,7 +145,7 @@ config SBC8560 help This option enables support for the Wind River SBC8560 board -endif # MPC85xx +endif # FSL_SOC_BOOKE config TQM85xx bool
arch/powerpc/platforms/Kconfig +1 -1
@@ -260,7 +260,7 @@ config QE_GPIO config CPM2 bool "Enable support for the CPM2 (Communications Processor Module)" - depends on MPC85xx || 8260 + depends on (FSL_SOC_BOOKE && PPC32) || 8260 select CPM select PPC_LIB_RHEAP select PPC_PCI_CHOICE
arch/powerpc/platforms/Kconfig.cputype +8 -9
@@ -28,8 +28,6 @@ config PPC_BOOK3S_32 config PPC_85xx bool "Freescale 85xx" select E500 - select FSL_SOC - select MPC85xx config PPC_8xx bool "Freescale 8xx"
@@ -138,6 +136,14 @@ config PPC_FPU bool default y if PPC64 +config FSL_EMB_PERFMON + bool "Freescale Embedded Perfmon" + depends on E500 || PPC_83xx + help + This is the Performance Monitor support found on the e500 core + and some e300 cores (c3 and c4). Select this only if your + core supports the Embedded Performance Monitor APU + config 4xx bool depends on 40x || 44x
@@ -153,13 +159,6 @@ config FSL_BOOKE depends on E200 || E500 default y -config FSL_EMB_PERFMON - bool "Freescale Embedded Perfmon" - depends on E500 || PPC_83xx - help - This is the Performance Monitor support found on the e500 core - and some e300 cores (c3 and c4). Select this only if your - core supports the Embedded Performance Monitor APU config PTE_64BIT bool
arch/powerpc/platforms/Makefile +1 -1
@@ -12,7 +12,7 @@ obj-$(CONFIG_PPC_MPC52xx) += 52xx/ obj-$(CONFIG_PPC_8xx) += 8xx/ obj-$(CONFIG_PPC_82xx) += 82xx/ obj-$(CONFIG_PPC_83xx) += 83xx/ -obj-$(CONFIG_PPC_85xx) += 85xx/ +obj-$(CONFIG_FSL_SOC_BOOKE) += 85xx/ obj-$(CONFIG_PPC_86xx) += 86xx/ obj-$(CONFIG_PPC_PSERIES) += pseries/ obj-$(CONFIG_PPC_ISERIES) += iseries/
arch/powerpc/sysdev/fsl_pci.c +2 -2
@@ -56,7 +56,7 @@ static int __init fsl_pcie_check_link(struct pci_controller *hose)return 0 ; } -#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx) +#if defined(CONFIG_FSL_SOC_BOOKE ) || defined(CONFIG_PPC_86xx)static int __init setup_one_atmu (struct ccsr_pci __iomem *pci,unsigned int index,const struct resource *res,resource_size_t offset)
@@ -394,7 +394,7 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);DECLARE_PCI_FIXUP_HEADER (0x1957 ,PCI_DEVICE_ID_MPC8610 , quirk_fsl_pcie_header);DECLARE_PCI_FIXUP_HEADER (0x1957 ,PCI_DEVICE_ID_P2020E , quirk_fsl_pcie_header);DECLARE_PCI_FIXUP_HEADER (0x1957 ,PCI_DEVICE_ID_P2020 , quirk_fsl_pcie_header); -#endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */ +#endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */ #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)DECLARE_PCI_FIXUP_HEADER (0x1957 ,PCI_DEVICE_ID_MPC8314E , quirk_fsl_pcie_header);
arch/powerpc/sysdev/fsl_soc.c +1 -1
@@ -372,7 +372,7 @@ err:arch_initcall (fsl_usb_of_init); -#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx) +#if defined(CONFIG_FSL_SOC_BOOKE ) || defined(CONFIG_PPC_86xx)static __be32 __iomem *rstcr;static int __init setup_rstcr (void )
Signature · 1 line
1.6.0.6