bnx2x: declare MODULE_FIRMWARE

PATCH Applied Ben Hutchings 3 participants 3 messages Nov 7, 2009 – Nov 11, 2009

Subsystems (2)

Networking Network drivers

lore

Share & tools

lore

Ben Hutchings

author

2009-11-07 21:53 UTC #0 lore raw

PATCH 39/75 bnx2x: declare MODULE_FIRMWARE

Replace run-time string formatting with preprocessor string manipulation.

Signed-off-by Ben Hutchings <[email protected]>

---
 drivers/net/bnx2x_main.c |   27 ++++++++++++++-------------
 1 files changed, 14 insertions(+), 13 deletions(-)

drivers/net/bnx2x_main.c +14 ~~-13~~

index 59b58d8..5f9d457 100644
@@ -49,6 +49,7 @@
 #include <linux/prefetch.h>
 #include <linux/zlib.h>
 #include <linux/io.h>
+#include <linux/stringify.h>
 
 
 #include "bnx2x.h"

@@ -63,8 +64,13 @@
 #include <linux/firmware.h>
 #include "bnx2x_fw_file_hdr.h"
 /* FW files */
-#define FW_FILE_PREFIX_E1	"bnx2x-e1-"
-#define FW_FILE_PREFIX_E1H	"bnx2x-e1h-"
+#define FW_FILE_VERSION					\
+	__stringify(BCM_5710_FW_MAJOR_VERSION) "."	\
+	__stringify(BCM_5710_FW_MINOR_VERSION) "."	\
+	__stringify(BCM_5710_FW_REVISION_VERSION) "."	\
+	__stringify(BCM_5710_FW_ENGINEERING_VERSION)
+#define FW_FILE_NAME_E1		"bnx2x-e1-" FW_FILE_VERSION ".fw"
+#define FW_FILE_NAME_E1H	"bnx2x-e1h-" FW_FILE_VERSION ".fw"
 
 /* Time in jiffies before concluding the transmitter is hung */
 #define TX_TIMEOUT		(5*HZ)

@@ -77,6 +83,8 @@ MODULE_AUTHOR("Eliezer Tamir");
 MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710/57711/57711E Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_MODULE_VERSION);
+MODULE_FIRMWARE(FW_FILE_NAME_E1);
+MODULE_FIRMWARE(FW_FILE_NAME_E1H);
 
 static int multi_mode = 1;
 module_param(multi_mode, int, 0);

@@ -12117,21 +12125,14 @@ static inline void be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
 
 static int __devinit bnx2x_init_firmware(struct bnx2x *bp, struct device *dev)
 {
-	char fw_file_name[40] = {0};
+	const char *fw_file_name;
 	struct bnx2x_fw_file_hdr *fw_hdr;
-	int rc, offset;
+	int rc;
 
-	/* Create a FW file name */
 	if (CHIP_IS_E1(bp))
-		offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1);
+		fw_file_name = FW_FILE_NAME_E1;
 	else
-		offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1H);
-
-	sprintf(fw_file_name + offset, "%d.%d.%d.%d.fw",
-		BCM_5710_FW_MAJOR_VERSION,
-		BCM_5710_FW_MINOR_VERSION,
-		BCM_5710_FW_REVISION_VERSION,
-		BCM_5710_FW_ENGINEERING_VERSION);
+		fw_file_name = FW_FILE_NAME_E1H;
 
 	printk(KERN_INFO PFX "Loading %s\n", fw_file_name);