Skip to contentSkip to conversation

tg3: Don't touch RCB nic addresses

PATCH In review Matt Carlson 1 participant 1 message Nov 13, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 2/20 tg3: Don't touch RCB nic addresses

This patch avoids reprogramming the RCB NIC addresses for all 5755 and later devices. The address is incorrect for 5717 devices and should be correct by default for all other affected devices.

---
 drivers/net/tg3.c |   10 ++++++----
 1 files changed, 6 insertions(+), 4 deletions(-)
drivers/net/tg3.c +6 -4
index fc9df25..e1f4a18 100644
@@ -7404,8 +7404,9 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	     ((u64) tpr->rx_std_mapping >> 32));
 	tw32(RCVDBDI_STD_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW,
 	     ((u64) tpr->rx_std_mapping & 0xffffffff));
-	tw32(RCVDBDI_STD_BD + TG3_BDINFO_NIC_ADDR,
-	     NIC_SRAM_RX_BUFFER_DESC);
+	if (!(tp->tg3_flags3 & TG3_FLG3_5755_PLUS))
+		tw32(RCVDBDI_STD_BD + TG3_BDINFO_NIC_ADDR,
+		     NIC_SRAM_RX_BUFFER_DESC);
 
 	/* Disable the mini ring */
 	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
@@ -7428,8 +7429,9 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 			tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_MAXLEN_FLAGS,
 			     (RX_JUMBO_MAX_SIZE << BDINFO_FLAGS_MAXLEN_SHIFT) |
 			     BDINFO_FLAGS_USE_EXT_RECV);
-			tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_NIC_ADDR,
-			     NIC_SRAM_RX_JUMBO_BUFFER_DESC);
+			if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+				tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_NIC_ADDR,
+				     NIC_SRAM_RX_JUMBO_BUFFER_DESC);
 		} else {
 			tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_MAXLEN_FLAGS,
 			     BDINFO_FLAGS_DISABLED);
Signature · 1 line
1.6.4.4