perf counters: problem with perf record
Hello,
I have a problem with the new kernel perf tools in kernel 2.6.31.6 (very nice tools by the way). I like to monitor the cache-misses of a program. "perf stat -e cache-misses program" works without problems, but I can't get "perf record -e cache-misses program" working (even running as root and CONFIG_PERF_COUNTERS=y):
Error: perfcounter syscall returned with -1 (Operation not supported)
Fatal: No CONFIG_PERF_COUNTERS=y kernel support configured?
strace of "perf stat":SYS_336(0x8508da0, 0x1074, 0xffffffff, 0xffffffff, 0) = 3
strace of "perf record":SYS_336(0x8508da0, 0xf85, 0xffffffff, 0xffffffff, 0) = -1 EOPNOTSUPP (Operation not supported)
My CPU is a "Intel(R) Pentium(R) M processor 1.80GHz":
[ 0.004337] p6 PMU driver. [ 0.004343] ... version: 0 [ 0.004345] ... bit width: 32 [ 0.004347] ... generic counters: 2 [ 0.004349] ... value mask: 00000000ffffffff [ 0.004351] ... max period: 000000007fffffff [ 0.004353] ... fixed-purpose counters: 0 [ 0.004355] ... counter mask: 0000000000000003
Best regards,
Simon
Peter Zijlstra
maintainerQuoted 19 lines · Simon Kämpflein
Hello,
I have a problem with the new kernel perf tools in kernel 2.6.31.6 (very nice tools by the way). I like to monitor the cache-misses of a program. "perf stat -e cache-misses program" works without problems, but I can't get "perf record -e cache-misses program" working (even running as root and
CONFIG_PERF_COUNTERS=y):Error: perfcounter syscall returned with -1 (Operation not supported)
Fatal: NoCONFIG_PERF_COUNTERS=ykernel support configured?strace of "perf stat":
SYS_336(0x8508da0, 0x1074, 0xffffffff, 0xffffffff, 0)= 3strace of "perf record":
SYS_336(0x8508da0, 0xf85, 0xffffffff, 0xffffffff, 0)= -1 EOPNOTSUPP (Operation not supported)My CPU is a "Intel(R) Pentium(R) M processor 1.80GHz":
Quoted 8 lines
[ 0.004337] p6 PMU driver. [ 0.004343] ... version: 0 [ 0.004345] ... bit width: 32 [ 0.004347] ... generic counters: 2 [ 0.004349] ... value mask: 00000000ffffffff [ 0.004351] ... max period: 000000007fffffff [ 0.004353] ... fixed-purpose counters: 0 [ 0.004355] ... counter mask: 0000000000000003
Does the bootlog perchance contain the output of?
if (!cpu_has_apic) {
pr_info("no APIC, boot with the \"lapic\" boot parameter
to force-enable it.\n");
pr_info("no hardware sampling interrupt available.\n");
x86_pmu.apic = 0;
}And does booting with the suggested lapic parameter cure your problems?
Quoted 14 lines · Peter Zijlstra
Quoted 8 lines · Simon Kämpflein
Hello,
I have a problem with the new kernel perf tools in kernel 2.6.31.6 (very nice tools by the way). I like to monitor the cache-misses of a program. "perf stat -e cache-misses program" works without problems, but I can't get "perf record -e cache-misses program" working (even running as root and
CONFIG_PERF_COUNTERS=y):Quoted 4 lines
Error: perfcounter syscall returned with -1 (Operation not supported)
Fatal: NoCONFIG_PERF_COUNTERS=ykernel support configured?My CPU is a "Intel(R) Pentium(R) M processor 1.80GHz":
Quoted 8 lines
Does the bootlog perchance contain the output of?
if (!cpu_has_apic) {
pr_info("no APIC, boot with the \"lapic\" boot parameterto force-enable it.\n"); pr_info("no hardware sampling interrupt available.\n"); x86_pmu.apic = 0; }
Yes. I didn't realize that it has something to do with the Performance Counters because I didn't see that it belongs to the Performance Counter output.
Maybe it's a good idea to add another comment making it clear that the performance counters are not fully working in this case. Or detect this case in "perf-record" and output a message relating to that.
Quoted 2 lines
And does booting with the suggested lapic parameter cure your problems?
Yes, thank you!
Regars,
Simon
Quoted 24 lines · Simon K??mpflein
Quoted 14 lines · Peter Zijlstra
Quoted 8 lines · Simon K??mpflein
Hello,
I have a problem with the new kernel perf tools in kernel 2.6.31.6 (very nice tools by the way). I like to monitor the cache-misses of a program. "perf stat -e cache-misses program" works without problems, but I can't get "perf record -e cache-misses program" working (even running as root and
CONFIG_PERF_COUNTERS=y):Quoted 4 lines
Error: perfcounter syscall returned with -1 (Operation not supported)
Fatal: NoCONFIG_PERF_COUNTERS=ykernel support configured?My CPU is a "Intel(R) Pentium(R) M processor 1.80GHz":
Quoted 8 lines
Does the bootlog perchance contain the output of?
if (!cpu_has_apic) {
pr_info("no APIC, boot with the \"lapic\" boot parameterto force-enable it.\n"); pr_info("no hardware sampling interrupt available.\n"); x86_pmu.apic = 0; }
Quoted 6 lines
Yes. I didn't realize that it has something to do with the Performance Counters because I didn't see that it belongs to the Performance Counter output.
Maybe it's a good idea to add another comment making it clear that the performance counters are not fully working in this case. Or detect this case in "perf-record" and output a message relating to that.
Ok. Mind sending a patch that changes the message so that it explains it all to you more clearly?
Quoted 4 lines
Quoted 2 lines
And does booting with the suggested lapic parameter cure your problems?
Yes, thank you!
Great.
You might want to send another patch that allows the .config enabling of that lapic boot parameter. It sucks to carry around boot parameters.
Ingo
Ingo Molnar wrote
Quoted 6 lines
Quoted 3 lines
Maybe it's a good idea to add another comment making it clear that the performance counters are not fully working in this case. Or detect this case in "perf-record" and output a message relating to that.
Ok. Mind sending a patch that changes the message so that it explains it all to you more clearly?
Here's a patch for this:
More accurate error message when "perf record" fails because there is no APIC support:
--- tools/perf/builtin-record.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)
tools/perf/builtin-record.c +3 -0
@@ -303,6 +303,10 @@ try_again:printf ("\n" );error ("perfcounter syscall returned with %d (%s)\n" , fd[nr_cpu][counter],strerror (err)); + +if (attr->type ==PERF_TYPE_HARDWARE && err ==EOPNOTSUPP ) + die("No hardware sampling interrupt available.
No APIC? Boot the kernel with the \"lapic\" boot parameter to force-enable it.\n");
+
die("No CONFIG_PERF_EVENTS=y kernel support configured?\n");
exit(-1);
}--
1.5.4.3
Quoted 10 lines
Quoted 4 lines
Quoted 3 lines
And does booting with the suggested lapic parameter cure your problems?
Yes, thank you!
Great.
You might want to send another patch that allows the .config enabling of that lapic boot parameter. It sucks to carry around boot parameters.
I'm not sure if this is a good idea. Some systems may crash if you force-enable it:
http://lkml.indiana.edu/hypermail/linux/kernel/0307.3/1635.html
And I'm also not familiar with the kernel internals on that topic ;)
Simon