TTY fixes for 2.6.32-git
Subsystems (3)
PATCH 1/1 TTY fixes for 2.6.32-git
Here are 2 tty bugfixs for your kernel tree. It fixes a regression that showed up in 2.6.31 with the cp210x driver.
Please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/gregkh/tty-2.6.git/
Both of these patches have been in the -next and -mm trees for a while.
Both patches will be sent to the linux-kernel mailing list, if anyone wants to see it.
thanks,
greg k-h
------------
drivers/char/tty_port.c | 3 +++ drivers/usb/serial/cp210x.c | 21 +++++++++++++++++++++ 2 files changed, 24 insertions(+), 0 deletions(-)
---------------
Alan Cox (2):
tty_port: If we are opened non blocking we still need to raise the carrier
tty: cp210x: Fix carrier handling
PATCH 1/2 tty_port: If we are opened non blocking we still need to raise the carrier
From: Alan Cox <[email protected]>
Original discussion:
http://thread.gmane.org/gmane.linux.usb.general/23217/focus=23248
or
http://marc.info/?l=linux-usb&m=125553790714133&w=2
The tty_port code inherited a bug common to various drivers it was based upon. If the tty is opened O_NONBLOCK we do not wait for the carrier to be raised but we must still raise our modem lines if appropriate.
(There is a second question here about whether we should do so if CLOCAL is
set but that can wait)
--- drivers/char/tty_port.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
drivers/char/tty_port.c +3 -0
@@ -221,6 +221,9 @@ int tty_port_block_til_ready(struct tty_port *port,the port has just hung up or is in another error state */ if ((filp->f_flags &O_NONBLOCK ) || (tty->flags & (1 <<TTY_IO_ERROR ))) { +/* Indicate we are open */ +if (tty->termios->c_cflag &CBAUD ) +tty_port_raise_dtr_rts (port); port->flags |=ASYNC_NORMAL_ACTIVE ;return 0 ; }
Signature · 1 line
1.6.4.2
PATCH 2/2 tty: cp210x: Fix carrier handling
In reply to Greg KHFrom: Alan Cox <[email protected]>
Original discussion:
http://thread.gmane.org/gmane.linux.usb.general/23217/focus=23248
or
http://marc.info/?l=linux-usb&m=125553790714133&w=2
9a68e39d4a701fb3be03cae9b462408664ebd205 broke carrier handling so that a cp210x setup which needed the carrier lines set up (non CLOCAL) which did not make a call which set the termios bits left the lines down even if CLOCAL was not asserted.
Fix this not by reverting but by adding the proper dtr_rts and carrier_raised methods. This both sets the modem lines properly and also implements the correct blocking semantics for the port as required by POSIX.
--- drivers/usb/serial/cp210x.c | 21 +++++++++++++++++++++ 1 files changed, 21 insertions(+), 0 deletions(-)
drivers/usb/serial/cp210x.c +21 -0
@@ -50,6 +50,8 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *,static void cp210x_break_ctl (struct tty_struct *,int );static int cp210x_startup (struct usb_serial *);static void cp210x_disconnect (struct usb_serial *); +static void cp210x_dtr_rts (struct usb_serial_port *p,int on); +static int cp210x_carrier_raised (struct usb_serial_port *p);static int debug;
@@ -143,6 +145,8 @@ static struct usb_serial_driver cp210x_device = { .tiocmset = cp210x_tiocmset, .attach = cp210x_startup, .disconnect = cp210x_disconnect, + .dtr_rts = cp210x_dtr_rts, + .carrier_raised = cp210x_carrier_raised };/* Config request types */
@@ -746,6 +750,14 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *file,return cp210x_set_config (port,CP210X_SET_MHS , &control,2 ); } +static void cp210x_dtr_rts (struct usb_serial_port *p,int on) +{ +if (on) +cp210x_tiocmset_port (p,NULL ,TIOCM_DTR |TIOCM_RTS ,0 ); +else +cp210x_tiocmset_port (p,NULL ,0 ,TIOCM_DTR |TIOCM_RTS ); +} +static int cp210x_tiocmget (struct tty_struct *tty,struct file *file) {struct usb_serial_port *port = tty->driver_data;
@@ -768,6 +780,15 @@ static int cp210x_tiocmget (struct tty_struct *tty, struct file *file)return result; } +static int cp210x_carrier_raised (struct usb_serial_port *p) +{ +unsigned int control; +cp210x_get_config (p,CP210X_GET_MDMSTS , &control,1 ); +if (control &CONTROL_DCD ) +return 1 ; +return 0 ; +} +static void cp210x_break_ctl (struct tty_struct *tty,int break_state) {struct usb_serial_port *port = tty->driver_data;
Signature · 1 line
1.6.4.2