ARM Add New Board GEC2410
Subsystems (2)
PATCH v2 1/1 ARM Add New Board GEC2410
This patch add a S3C2410-based ARM study platform GEC2410 support.
---
total: 0 errors, 0 warnings, 1302 lines checked
0001-ARM-Add-New-Board-GEC2410.patch has no obvious style problems and is ready for submission.
MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/gec/gec2410/Makefile | 54 ++++++ board/gec/gec2410/README | 85 +++++++++ board/gec/gec2410/config.mk | 32 ++++ board/gec/gec2410/gec2410.c | 306 +++++++++++++++++++++++++++++++++ board/gec/gec2410/gec2410_mem.h | 118 +++++++++++++ board/gec/gec2410/lowlevel_init.S | 93 ++++++++++ board/gec/gec2410/u-boot.lds | 61 +++++++ cpu/arm920t/s3c24x0/timer.c | 6 +- cpu/arm920t/start.S | 19 ++ include/configs/gec2410.h | 249 +++++++++++++++++++++++++++ nand_spl/board/gec/gec2410/Makefile | 105 +++++++++++ nand_spl/board/gec/gec2410/config.mk | 32 ++++ nand_spl/board/gec/gec2410/u-boot.lds | 60 +++++++ 16 files changed, 1225 insertions(+), 3 deletions(-) create mode 100644 board/gec/gec2410/Makefile create mode 100644 board/gec/gec2410/README create mode 100644 board/gec/gec2410/config.mk create mode 100644 board/gec/gec2410/gec2410.c create mode 100644 board/gec/gec2410/gec2410_mem.h create mode 100644 board/gec/gec2410/lowlevel_init.S create mode 100644 board/gec/gec2410/u-boot.lds create mode 100644 include/configs/gec2410.h create mode 100644 nand_spl/board/gec/gec2410/Makefile create mode 100644 nand_spl/board/gec/gec2410/config.mk create mode 100644 nand_spl/board/gec/gec2410/u-boot.lds
MAINTAINERS +4 -0
@@ -429,6 +429,10 @@ Timur Tabi <[email protected]> MPC8349E-mITX MPC8349 MPC8349E-mITX-GP MPC8349 +Hui Tang <[email protected]> + + gec2410 ARM920T + Erik Theisen <[email protected]> W7OLMC PPC4xx
MAKEALL +1 -0
@@ -548,6 +548,7 @@ LIST_ARM9=" \ cp926ejs \ cp946es \ cp966 \ + gec2410 \ imx27lite \ lpd7a400 \ mv88f6281gtw_ge \
Makefile +3 -0
@@ -2951,6 +2951,9 @@ davinci_dm365evm_config : unconfig davinci_dm6467evm_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci +gec2410_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t gec2410 gec s3c24x0 + imx27lite_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
board/gec/gec2410/Makefile new file +54 -0
54 lines not on this page · raw message
board/gec/gec2410/README new file +85 -0
85 lines not on this page · raw message
board/gec/gec2410/config.mk new file +32 -0
@@ -0,0 +1,32 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <[email protected]> +# David Mueller, ELSOFT AG, <[email protected]> +# +# GuangDong Embedded Software Center GEC2410 board with S3C2410X (ARM920T) cpu +# +# see http://www.gd-emb.com/sales_detail/menu-2410.html for more information on GEC2410 +# + +# +# GEC2410 has 1 bank of 64 MB DRAM +# +# 3000'0000 to 3400'0000 +# +# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 +# optionally with a ramdisk at 3080'0000 +# +# we load ourself to 33e0'0000 +# +# download area is 3300'c000 +# + +ifndef TEXT_BASE +TEXT_BASE = 0x33e00000 +endif + +CONFIG_NAND_U_BOOT = y + +LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds + +PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/gec/gec2410
board/gec/gec2410/gec2410.c new file +306 -0
306 lines not on this page · raw message
board/gec/gec2410/gec2410_mem.h new file +118 -0
118 lines not on this page · raw message
board/gec/gec2410/lowlevel_init.S new file +93 -0
93 lines not on this page · raw message
board/gec/gec2410/u-boot.lds new file +61 -0
61 lines not on this page · raw message
cpu/arm920t/s3c24x0/timer.c +3 -3
@@ -186,9 +186,9 @@ ulong get_tbclk(void)#if defined(CONFIG_SMDK2400 ) || defined(CONFIG_TRAB ) tbclk = timer_load_val *100 ; -#elif defined(CONFIG_SBC2410X ) || \ - defined(CONFIG_SMDK2410 ) || \ - defined(CONFIG_VCMA9 ) +#elif defined(CONFIG_SYS_HZ ) && \ + !defined(CONFIG_SMDK2400 ) && \ + !defined(CONFIG_TRAB ) tbclk =CONFIG_SYS_HZ ;#else # error "tbclk not configured"
cpu/arm920t/start.S +19 -0
@@ -38,6 +38,7 @@ .globl _start _start: b start_code +#ifndef CONFIG_NAND_SPL ldr pc, _undefined_instruction ldr pc, _software_interrupt ldr pc, _prefetch_abort
@@ -53,7 +54,13 @@ _data_abort: .word data_abort _not_used: .word not_used _irq: .word irq _fiq: .word fiq +_pad: .word 0x12345678 /* now 16*4=64 */ +#else + . = _start + 64 +#endif +.global _end_vect +_end_vect: .balignl 16,0xdeadbeef
@@ -197,7 +204,11 @@ copy_loop: /* Set up the stack */ stack_setup: +#ifndef CONFIG_NAND_SPL ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ +#else + ldr r0, =(CONFIG_SYS_UBOOT_BASE + CONFIG_SYS_UBOOT_SIZE) +#endif sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ #ifdef CONFIG_USE_IRQ
@@ -215,9 +226,13 @@ clbss_l:str r2, [r0] /* clear loop... */ cmp r0, r1 ble clbss_l +#ifndef CONFIG_NAND_SPL ldr pc, _start_armboot _start_armboot: .word start_armboot +#else + b nand_boot +#endif /*
@@ -234,6 +249,7 @@ _start_armboot: .word start_armboot #ifndef CONFIG_SKIP_LOWLEVEL_INIT cpu_init_crit: +#ifndef CONFIG_NAND_SPL /* * flush v4 I/D caches */
@@ -250,6 +266,7 @@ cpu_init_crit: orr r0, r0, #0x00000002 @ set bit 2 (A) Align orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache mcr p15, 0, r0, c1, c0, 0 +#endif /* CONFIG_NAND_SPL */ /* * before relocating, we have to setup RAM timing
@@ -264,6 +281,7 @@ cpu_init_crit: mov pc, lr #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ +#ifndef CONFIG_NAND_SPL /* ************************************************************************* *
@@ -434,3 +452,4 @@ fiq: bl do_fiq #endif +#endif /* CONFIG_NAND_SPL */
include/configs/gec2410.h new file +249 -0
249 lines not on this page · raw message
nand_spl/board/gec/gec2410/Makefile new file +105 -0
105 lines not on this page · raw message
nand_spl/board/gec/gec2410/config.mk new file +32 -0
@@ -0,0 +1,32 @@ +# +# (C) Copyright 2006 +# Stefan Roese, DENX Software Engineering, [email protected]. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# +# GEC2410 Study Platform (gec2410) board + +# PAD_TO used to generate a 4kByte binary needed for the combined image +# -> PAD_TO = TEXT_BASE + 4096 +PAD_TO := 0x00001000 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif
nand_spl/board/gec/gec2410/u-boot.lds new file +60 -0
60 lines not on this page · raw message
Signature · 1 line
1.6.3.3
PATCH v2 1/1 ARM Add New Board GEC2410
Dear Hui.Tang,
2009/11/18 Hui.Tang <[email protected]>:
Quoted 1,437 lines
This patch add a S3C2410-based ARM study platform GEC2410 support.
Signed-off-by Hui.Tang <[email protected]>---
total: 0 errors, 0 warnings, 1302 lines checked0001-ARM-Add-New-Board-GEC2410.patch has no obvious style problems and is ready for submission.
?MAINTAINERS ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?4 + ?MAKEALL ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?1 + ?Makefile ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?| ? ?3 + ?board/gec/gec2410/Makefile ? ? ? ? ? ?| ? 54 ++++++ ?board/gec/gec2410/README ? ? ? ? ? ? ?| ? 85 +++++++++ ?board/gec/gec2410/config.mk ? ? ? ? ? | ? 32 ++++ ?board/gec/gec2410/gec2410.c ? ? ? ? ? | ?306 +++++++++++++++++++++++++++++++++ ?board/gec/gec2410/gec2410_mem.h ? ? ? | ?118 +++++++++++++ ?board/gec/gec2410/lowlevel_init.S ? ? | ? 93 ++++++++++ ?board/gec/gec2410/u-boot.lds ? ? ? ? ?| ? 61 +++++++ ?cpu/arm920t/s3c24x0/timer.c ? ? ? ? ? | ? ?6 +- ?cpu/arm920t/start.S ? ? ? ? ? ? ? ? ? | ? 19 ++ ?include/configs/gec2410.h ? ? ? ? ? ? | ?249 +++++++++++++++++++++++++++ ?nand_spl/board/gec/gec2410/Makefile ? | ?105 +++++++++++ ?nand_spl/board/gec/gec2410/config.mk ?| ? 32 ++++ ?nand_spl/board/gec/gec2410/u-boot.lds | ? 60 +++++++?16 files changed, 1225 insertions(+), 3 deletions(-) ?create mode 100644 board/gec/gec2410/Makefile ?create mode 100644 board/gec/gec2410/README ?create mode 100644
board/gec/gec2410/config.mk?create mode 100644board/gec/gec2410/gec2410.c?create mode 100644board/gec/gec2410/gec2410_mem.h?create mode 100644board/gec/gec2410/lowlevel_init.S?create mode 100644board/gec/gec2410/u-boot.lds?create mode 100644include/configs/gec2410.h?create mode 100644 nand_spl/board/gec/gec2410/Makefile ?create mode 100644nand_spl/board/gec/gec2410/config.mk?create mode 100644nand_spl/board/gec/gec2410/u-boot.ldsMAINTAINERS +0
-0@@ -429,6 +429,10 @@ Timur Tabi <[email protected]>? ? ? ?MPC8349E-mITX ? MPC8349
? ? ? ?MPC8349E-mITX-GP MPC8349MAINTAINERS +4
-0+Hui Tang <[email protected]> + + ? ? ? gec2410 ? ? ? ? ARM920T +?Erik Theisen <[email protected]>
? ? ? ?W7OLMC ? ? ? ? ?PPC4xx
MAKEALL +1
-0@@ -548,6 +548,7 @@ LIST_ARM9=" ? ? ? ? ? ? ? ? \ ? ? ? ?cp926ejs ? ? ? ? ? ? ? ?\ ? ? ? ?cp946es ? ? ? ? ? ? ? ? \ ? ? ? ?cp966 ? ? ? ? ? ? ? ? ? \ + ? ? ? gec2410 ? ? ? ? ? ? ? ? \ ? ? ? ?imx27lite ? ? ? ? ? ? ? \ ? ? ? ?lpd7a400 ? ? ? ? ? ? ? ?\ ? ? ? ?mv88f6281gtw_ge ? ? ? ? \Makefile +0
-0@@ -2951,6 +2951,9 @@ davinci_dm365evm_config : unconfig?davinci_dm6467evm_config : ? ? unconfig
? ? ? ?@$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinciMakefile +3
-0+gec2410_config : ? ? ? unconfig + ? ? ? @$(MKCONFIG) $(@:_config=) arm arm920t gec2410 gec s3c24x0 +?imx27lite_config: ? ? ?unconfig
? ? ? ?@$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27board/gec/gec2410/Makefile new file +54
-0@@ -0,0 +1,54 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd at denx.de. +# +# (C) Copyright 2009 +# Hui Tang <[email protected]> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB ? ?= $(obj)lib$(BOARD).a + +COBJS ?:= gec2410.o +SOBJS ?:= lowlevel_init.o + +SRCS ? := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS ? := $(addprefix $(obj),$(COBJS)) +SOBJS ?:= $(addprefix $(obj),$(SOBJS)) + +$(LIB): ? ? ? ?$(obj).depend $(OBJS) $(SOBJS) + ? ? ? $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + ? ? ? rm -f $(SOBJS) $(OBJS) + +distclean: ? ? clean + ? ? ? rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +#########################################################################board/gec/gec2410/README new file +85
-0@@ -0,0 +1,85 @@ +U-Boot for GEC2410 + +------------------------------------------------ +The supported features of the GEC2410 board are: + ? ?CPU (Samsung S3C2410 SoC) + ? ?SDRAM (64 MB , 2 pcs K4S561632, 32 bit) + ? ?NAND FLASH (64MB , 1 pcs K9F1208) + ? ?NOR FLASH (only on rev1.1 board, 2MB , 1 pcs SST39VF1601) + ? ?ETHERNET (10M , 1 pcs CS8900) + + +------------------------------------------------ +Memory Map from CPU point of view: + +for NAND FLASH boot: + ? ?Start ? ? ? Size ? Access to + ? ?----------------------------------------------------- + ? ?0x00000000 ?64MB ? NAND FLASH (first 4K SRAM for stepptingstone) + ? ?0x19000300 ? ? ? ? CS8900 I/O base + ? ?0x30000000 ?64MB ? SDRAM + ? ?0x48000000 ?128MB ?Special Function Registers Area + + +for NOR FLASH boot: + ? ?Start ? ? ? Size ? Access to + ? ?----------------------------------------------------- + ? ?0x00000000 ?2MB ? ?NOR FLASH + ? ?0x19000300 ? ? ? ? CS8900 I/O base + ? ?0x30000000 ?64MB ? SDRAM + ? ?0x40000000 ?4KB ? ?BootSRAM + ? ?0x48000000 ?128MB ?Special Function Registers Area + + +------------------------------------------------ +Setting the board Jumpers & Switches: + + ? In order to get the board running with the default configuration the + ? jumpers need to be set as follows: + + ?Core board Jumpers: + ? JP1 close ? (Set boot mode, close for booting from NAND FLASH, + ? ? ? ? ? ? ? ?otherwise from NOR FLASH) + + ?Main board Jumpers: + ? J1 ? ? ? ? ?close ? (Set beep, close for enabling beep, or disabling beep) + ? J18 ? ? ? ? 1-2 ? ? (1-2 set RXD2 as UART; 2-3 set RXD2 as IrDA) + ? J9,J10 ? ? ?2-3 ? ? (1-2 set USB HOST 1 to Host mode; + ? ? ? ? ? ? ? ? ? ? ? ?2-3 set USB HOST 1 to Device mode) + ? J13 ? ? ? ? 1-2 ? ? (1-2 set LCD working power to 5V; + ? ? ? ? ? ? ? ? ? ? ? ?2-3 set LCD working power to 3.3V) + + ?Core board Switches: + ? S1 ? ? ? ? ?open ? ?(Reset button) + + ?Main board Switches: + ? K1~K16 ? ? ?open ? ?(4x4 keyboard) + + +------------------------------------------------ +LED & Connector Interfaces: + + ?Core board LEDs: + ? D1,D2 ? ? ? I/O port + ? D3 ? ? ? ? ?PWREN pin LED + ? D4 ? ? ? ? ?Core board power + + ?Main board LEDs: + ? D1~D4 ? ? ? GPIO + ? D5,D6 ? ? ? Ethernet + ? D11 ? ? ? ? Main board power + + ?Core board Connector Interfaces: + ? J1 ? ? ? ? ?JTAG (20 pins) + + ?Main board Connector Interfaces: + ? RJ1 ? ? ? ? Ethernet (RJ45) + ? J2 ? ? ? ? ?Audio In + ? J3 ? ? ? ? ?Audio Out + ? J4 ? ? ? ? ?Serial Port 1 + ? J5 ? ? ? ? ?Serial Port 2 + ? U4 ? ? ? ? ?IrDA Port + ? J7 ? ? ? ? ?USB HOST 0 + ? J9 ? ? ? ? ?USB HOST 1 / USB DEVICE + ? J11 ? ? ? ? USB DEVICE + ? J20 ? ? ? ? GPIO Pinsboard/gec/gec2410/config.mk new file +32
-0@@ -0,0 +1,32 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <[email protected]> +# David Mueller, ELSOFT AG, <[email protected]> +# +# GuangDong Embedded Software Center GEC2410 board with S3C2410X (ARM920T) cpu +# +# see http://www.gd-emb.com/sales_detail/menu-2410.html for more information on GEC2410 +# + +# +# GEC2410 has 1 bank of 64 MB DRAM +# +# 3000'0000 to 3400'0000 +# +# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 +# optionally with a ramdisk at 3080'0000 +# +# we load ourself to 33e0'0000 +# +# download area is 3300'c000 +# + +ifndef TEXT_BASE +TEXT_BASE = 0x33e00000 +endif + +CONFIG_NAND_U_BOOT = y + +LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds + +PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/gec/gec2410board/gec/gec2410/gec2410.c new file +306
-0@@ -0,0 +1,306 @@ +/* +* (C) Copyright 2002 +* Sysgo Real-Time Solutions, GmbH <www.elinos.com> +* Marius Groeger <[email protected]> +* +* (C) Copyright 2002 +* David Mueller, ELSOFT AG, <[email protected]> +* +* (C) Copyright 2009 +* Hui Tang, <[email protected]> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#include <common.h> +#include <netdev.h> +#include <s3c2410.h> +#include <asm/io.h> + +DECLARE_GLOBAL_DATA_PTR ; + +#define FCLK_SPEED 1 + +#if FCLK_SPEED == 0 ? ? ? ? ? ?/* Fout = 203MHz, Fin = 12MHz for Audio */ +#define M_MDIV 0xC3 +#define M_PDIV 0x4 +#define M_SDIV 0x1 +#elif FCLK_SPEED == 1 ? ? ? ? ?/* Fout = 202.8MHz */ +#define M_MDIV 0xA1 +#define M_PDIV 0x3 +#define M_SDIV 0x1 +#endif + +#define USB_CLOCK 1 + +#if USB_CLOCK ==0 +#define U_M_MDIV ? ? ? 0xA1 +#define U_M_PDIV ? ? ? 0x3 +#define U_M_SDIV ? ? ? 0x1 +#elif USB_CLOCK ==1 +#define U_M_MDIV ? ? ? 0x48 +#define U_M_PDIV ? ? ? 0x3 +#define U_M_SDIV ? ? ? 0x2 +#endif + +/* +* Miscellaneous platform dependent initialisations +*/ + +int board_init (void ) +{ + ? ? ? struct s3c24x0_clock_power * const clk_power = + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? s3c24x0_get_base_clock_power(); + ? ? ? struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); + + ? ? ? /* to reduce PLL lock time, adjust the LOCKTIME register */ + ? ? ? writel(0xFFFFFF, &clk_power->LOCKTIME); + + ? ? ? /* configure MPLL */ + ? ? ? writel(((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV), &clk_power->MPLLCON); + + ? ? ? /* some delay between MPLL and UPLL */ + ? ? ? udelay(4000); + + ? ? ? /* configure UPLL */ + ? ? ? writel(((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV), + ? ? ? ? ? ? ? &clk_power->UPLLCON); + + ? ? ? /* some delay between MPLL and UPLL */ + ? ? ? udelay(8000); + + ? ? ? /* set up the I/O ports */ + ? ? ? /* configure GPA port */ + ? ? ? /*====================================* + ? ? ? ?* PIN ? ? ? ? ?FUNCTION ? ? ? ?VALUE * + ? ? ? ?*====================================* + ? ? ? ?* GPA22 ? ? ? ?nFCE ? ? ? ? ? ?1 + ? ? ? ?* GPA21 ? ? ? ?nRSTOUT ? ? ? ? 1 + ? ? ? ?* GPA20 ? ? ? ?nFRE ? ? ? ? ? ?1 + ? ? ? ?* GPA19 ? ? ? ?nFWE ? ? ? ? ? ?1 + ? ? ? ?* GPA18 ? ? ? ?ALE ? ? ? ? ? ? 1 + ? ? ? ?* GPA17 ? ? ? ?CLE ? ? ? ? ? ? 1 + ? ? ? ?* GPA16 ? ? ? ?nGCS5 ? ? ? ? ? 1 + ? ? ? ?* GPA15 ? ? ? ?nGCS4 ? ? ? ? ? 1 + ? ? ? ?* GPA14 ? ? ? ?nGCS3 ? ? ? ? ? 1 + ? ? ? ?* GPA13 ? ? ? ?nGCS2 ? ? ? ? ? 1 + ? ? ? ?* GPA12 ? ? ? ?nGCS1 ? ? ? ? ? 1 + ? ? ? ?* GPA11 ? ? ? ?ADDR26 ? ? ? ? ?1 + ? ? ? ?* GPA10 ? ? ? ?ADDR25 ? ? ? ? ?1 + ? ? ? ?* GPA9 ? ? ? ? ADDR24 ? ? ? ? ?1 + ? ? ? ?* GPA8 ? ? ? ? ADDR23 ? ? ? ? ?1 + ? ? ? ?* GPA7 ? ? ? ? ADDR22 ? ? ? ? ?1 + ? ? ? ?* GPA6 ? ? ? ? ADDR21 ? ? ? ? ?1 + ? ? ? ?* GPA5 ? ? ? ? ADDR20 ? ? ? ? ?1 + ? ? ? ?* GPA4 ? ? ? ? ADDR19 ? ? ? ? ?1 + ? ? ? ?* GPA3 ? ? ? ? ADDR18 ? ? ? ? ?1 + ? ? ? ?* GPA2 ? ? ? ? ADDR17 ? ? ? ? ?1 + ? ? ? ?* GPA1 ? ? ? ? ADDR16 ? ? ? ? ?1 + ? ? ? ?* GPA0 ? ? ? ? ADDR0 ? ? ? ? ? 1 + ? ? ? ?*====================================*/ + ? ? ? writel(0x007FFFFF, &gpio->GPACON); + + ? ? ? /* configure GPB port */ + ? ? ? /*====================================* + ? ? ? ?* PIN ? ? ? ? ?FUNCTION ? ? ? ?VALUE * + ? ? ? ?*====================================* + ? ? ? ?* GPB10 ? ? ? ?Input ? ? ? ? ? 00 + ? ? ? ?* GPB9 ? ? ? ? Output ? ? ? ? ?01 + ? ? ? ?* GPB8 ? ? ? ? Input ? ? ? ? ? 00 + ? ? ? ?* GPB7 ? ? ? ? Output ? ? ? ? ?01 + ? ? ? ?* GPB6 ? ? ? ? Input ? ? ? ? ? 00 + ? ? ? ?* GPB5 ? ? ? ? Output ? ? ? ? ?01 + ? ? ? ?* GPB4 ? ? ? ? Output ? ? ? ? ?01 + ? ? ? ?* GPB3 ? ? ? ? Output ? ? ? ? ?01 + ? ? ? ?* GPB2 ? ? ? ? Output ? ? ? ? ?01 + ? ? ? ?* GPB1 ? ? ? ? Output ? ? ? ? ?01 + ? ? ? ?* GPB0 ? ? ? ? Output ? ? ? ? ?01 + ? ? ? ?*====================================*/ + ? ? ? writel(0x00044555, &gpio->GPBCON); + ? ? ? /* disable all pull-up register */ + ? ? ? writel(0x000007FF, &gpio->GPBUP); + + ? ? ? /* configure GPC port */ + ? ? ? /*====================================* + ? ? ? ?* PIN ? ? ? ? ?FUNCTION ? ? ? ?VALUE * + ? ? ? ?*====================================* + ? ? ? ?* GPC15 ? ? ? ?VD7 ? ? ? ? ? ? 10 + ? ? ? ?* GPC14 ? ? ? ?VD6 ? ? ? ? ? ? 10 + ? ? ? ?* GPC13 ? ? ? ?VD5 ? ? ? ? ? ? 10 + ? ? ? ?* GPC12 ? ? ? ?VD4 ? ? ? ? ? ? 10 + ? ? ? ?* GPC11 ? ? ? ?VD3 ? ? ? ? ? ? 10 + ? ? ? ?* GPC10 ? ? ? ?VD2 ? ? ? ? ? ? 10 + ? ? ? ?* GPC9 ? ? ? ? VD1 ? ? ? ? ? ? 10 + ? ? ? ?* GPC8 ? ? ? ? VD0 ? ? ? ? ? ? 10 + ? ? ? ?* GPC7 ? ? ? ? LCDVF2 ? ? ? ? ?10 + ? ? ? ?* GPC6 ? ? ? ? LCDVF1 ? ? ? ? ?10 + ? ? ? ?* GPC5 ? ? ? ? LCDVF0 ? ? ? ? ?10 + ? ? ? ?* GPC4 ? ? ? ? VM ? ? ? ? ? ? ?10 + ? ? ? ?* GPC3 ? ? ? ? VFRAME ? ? ? ? ?10 + ? ? ? ?* GPC2 ? ? ? ? VLINE ? ? ? ? ? 10 + ? ? ? ?* GPC1 ? ? ? ? VCLK ? ? ? ? ? ?10 + ? ? ? ?* GPC0 ? ? ? ? LEND ? ? ? ? ? ?10 + ? ? ? ?*====================================*/ + ? ? ? writel(0xAAAAAAAA, &gpio->GPCCON); + ? ? ? /* disable all pull-up register */ + ? ? ? writel(0x0000FFFF, &gpio->GPCUP); + + ? ? ? /* configure GPD port */ + ? ? ? /*====================================* + ? ? ? ?* PIN ? ? ? ? ?FUNCTION ? ? ? ?VALUE * + ? ? ? ?*====================================* + ? ? ? ?* GPD15 ? ? ? ?VD23 ? ? ? ? ? ?10 + ? ? ? ?* GPD14 ? ? ? ?VD22 ? ? ? ? ? ?10 + ? ? ? ?* GPD13 ? ? ? ?VD21 ? ? ? ? ? ?10 + ? ? ? ?* GPD12 ? ? ? ?VD20 ? ? ? ? ? ?10 + ? ? ? ?* GPD11 ? ? ? ?VD19 ? ? ? ? ? ?10 + ? ? ? ?* GPD10 ? ? ? ?VD18 ? ? ? ? ? ?10 + ? ? ? ?* GPD9 ? ? ? ? VD17 ? ? ? ? ? ?10 + ? ? ? ?* GPD8 ? ? ? ? VD16 ? ? ? ? ? ?10 + ? ? ? ?* GPD7 ? ? ? ? VD15 ? ? ? ? ? ?10 + ? ? ? ?* GPD6 ? ? ? ? VD14 ? ? ? ? ? ?10 + ? ? ? ?* GPD5 ? ? ? ? VD13 ? ? ? ? ? ?10 + ? ? ? ?* GPD4 ? ? ? ? VD12 ? ? ? ? ? ?10 + ? ? ? ?* GPD3 ? ? ? ? VD11 ? ? ? ? ? ?10 + ? ? ? ?* GPD2 ? ? ? ? VD10 ? ? ? ? ? ?10 + ? ? ? ?* GPD1 ? ? ? ? VD9 ? ? ? ? ? ? 10 + ? ? ? ?* GPD0 ? ? ? ? VD8 ? ? ? ? ? ? 10 + ? ? ? ?*====================================*/ + ? ? ? writel(0xAAAAAAAA, &gpio->GPDCON); + ? ? ? /* disable all pull-up register */ + ? ? ? writel(0x0000FFFF, &gpio->GPDUP); + + ? ? ? /* configure GPE port */ + ? ? ? /*====================================* + ? ? ? ?* PIN ? ? ? ? ?FUNCTION ? ? ? ?VALUE * + ? ? ? ?*====================================* + ? ? ? ?* GPE15 ? ? ? ?IICSDA ? ? ? ? ?10 + ? ? ? ?* GPE14 ? ? ? ?IICSCL ? ? ? ? ?10 + ? ? ? ?* GPE13 ? ? ? ?SPICLK0 ? ? ? ? 10 + ? ? ? ?* GPE12 ? ? ? ?SPIMOSIO ? ? ? ?10 + ? ? ? ?* GPE11 ? ? ? ?SPIMISOO ? ? ? ?10 + ? ? ? ?* GPE10 ? ? ? ?SDDAT3 ? ? ? ? ?10 + ? ? ? ?* GPE9 ? ? ? ? SDDAT2 ? ? ? ? ?10 + ? ? ? ?* GPE8 ? ? ? ? SDDAT1 ? ? ? ? ?10 + ? ? ? ?* GPE7 ? ? ? ? SDDAT0 ? ? ? ? ?10 + ? ? ? ?* GPE6 ? ? ? ? SDCMD ? ? ? ? ? 10 + ? ? ? ?* GPE5 ? ? ? ? SDCLK ? ? ? ? ? 10 + ? ? ? ?* GPE4 ? ? ? ? I2SSDO ? ? ? ? ?10 + ? ? ? ?* GPE3 ? ? ? ? I2SSDI ? ? ? ? ?10 + ? ? ? ?* GPE2 ? ? ? ? CDCLK ? ? ? ? ? 10 + ? ? ? ?* GPE1 ? ? ? ? I2SSCLK ? ? ? ? 10 + ? ? ? ?* GPE0 ? ? ? ? I2SLRCK ? ? ? ? 10 + ? ? ? ?*====================================*/ + ? ? ? writel(0xAAAAAAAA, &gpio->GPECON); + ? ? ? /* disable all pull-up register */ + ? ? ? writel(0x0000FFFF, &gpio->GPEUP); + + ? ? ? /* configure GPF port */ + ? ? ? /*====================================* + ? ? ? ?* PIN ? ? ? ? ?FUNCTION ? ? ? ?VALUE * + ? ? ? ?*====================================* + ? ? ? ?* GPF7 ? ? ? ? Output ? ? ? ? ?01 + ? ? ? ?* GPF6 ? ? ? ? Output ? ? ? ? ?01 + ? ? ? ?* GPF5 ? ? ? ? Output ? ? ? ? ?01 + ? ? ? ?* GPF4 ? ? ? ? Output ? ? ? ? ?01 + ? ? ? ?* GPF3 ? ? ? ? EINT3 ? ? ? ? ? 10 + ? ? ? ?* GPF2 ? ? ? ? EINT2 ? ? ? ? ? 10 + ? ? ? ?* GPF1 ? ? ? ? EINT1 ? ? ? ? ? 10 + ? ? ? ?* GPF0 ? ? ? ? EINT0 ? ? ? ? ? 10 + ? ? ? ?*====================================*/ + ? ? ? writel(0x000055AA, &gpio->GPFCON); + ? ? ? /* disable all pull-up register */ + ? ? ? writel(0x000000FF, &gpio->GPFUP); + + ? ? ? /* configure GPG port */ + ? ? ? /*====================================* + ? ? ? ?* PIN ? ? ? ? ?FUNCTION ? ? ? ?VALUE * + ? ? ? ?*====================================* + ? ? ? ?* GPG15 ? ? ? ?nYPON ? ? ? ? ? 11 + ? ? ? ?* GPG14 ? ? ? ?YMON ? ? ? ? ? ?11 + ? ? ? ?* GPG13 ? ? ? ?nXPON ? ? ? ? ? 11 + ? ? ? ?* GPG12 ? ? ? ?XMON ? ? ? ? ? ?11 + ? ? ? ?* GPG11 ? ? ? ?EINT19 ? ? ? ? ?10 + ? ? ? ?* GPG10 ? ? ? ?Output ? ? ? ? ?01 + ? ? ? ?* GPG9 ? ? ? ? Output ? ? ? ? ?01 + ? ? ? ?* GPG8 ? ? ? ? Output ? ? ? ? ?01 + ? ? ? ?* GPG7 ? ? ? ? SPICLK1 ? ? ? ? 11 + ? ? ? ?* GPG6 ? ? ? ? SPIMOSI1 ? ? ? ?11 + ? ? ? ?* GPG5 ? ? ? ? SPIMISO1 ? ? ? ?11 + ? ? ? ?* GPG4 ? ? ? ? LCD_PWREN ? ? ? 11 + ? ? ? ?* GPG3 ? ? ? ? EINT11 ? ? ? ? ?10 + ? ? ? ?* GPG2 ? ? ? ? nSS0 ? ? ? ? ? ?11 + ? ? ? ?* GPG1 ? ? ? ? EINT9 ? ? ? ? ? 10 + ? ? ? ?* GPG0 ? ? ? ? EINT8 ? ? ? ? ? 10 + ? ? ? ?*====================================*/ + ? ? ? writel(0xFF95FFBA, &gpio->GPGCON); + ? ? ? /* disable all pull-up register */ + ? ? ? writel(0x0000FFFF, &gpio->GPGUP); + + ? ? ? /* configure GPH port */ + ? ? ? /*====================================* + ? ? ? ?* PIN ? ? ? ? ?FUNCTION ? ? ? ?VALUE * + ? ? ? ?*====================================* + ? ? ? ?* GPH10 ? ? ? ?CLKOUT1 ? ? ? ? 10 + ? ? ? ?* GPH9 ? ? ? ? CLKOUT0 ? ? ? ? 10 + ? ? ? ?* GPH8 ? ? ? ? UEXTCLK ? ? ? ? 10 + ? ? ? ?* GPH7 ? ? ? ? nCTS1 ? ? ? ? ? 11 + ? ? ? ?* GPH6 ? ? ? ? nRTS1 ? ? ? ? ? 11 + ? ? ? ?* GPH5 ? ? ? ? RXD1 ? ? ? ? ? ?10 + ? ? ? ?* GPH4 ? ? ? ? TXD1 ? ? ? ? ? ?10 + ? ? ? ?* GPH3 ? ? ? ? RXD0 ? ? ? ? ? ?10 + ? ? ? ?* GPH2 ? ? ? ? TXD0 ? ? ? ? ? ?10 + ? ? ? ?* GPH1 ? ? ? ? nRTS0 ? ? ? ? ? 10 + ? ? ? ?* GPH0 ? ? ? ? nCTS0 ? ? ? ? ? 10 + ? ? ? ?*====================================*/ + ? ? ? writel(0x002AFAAA, &gpio->GPHCON); + ? ? ? /* disable all pull-up register */ + ? ? ? writel(0x000007FF, &gpio->GPHUP); + + ? ? ? /* arch number of GEC2410-Board */ + ? ? ? gd->bd->bi_arch_number = MACH_TYPE_GEC2410; + + ? ? ? /* adress of boot parameters */ + ? ? ? gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + ? ? ? icache_enable(); + ? ? ? dcache_enable(); + + ? ? ? return 0; +} + +int dram_init (void ) +{ + ? ? ? gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + ? ? ? gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? PHYS_SDRAM_1_SIZE); + + ? ? ? return 0; +} + +#ifdef CONFIG_CMD_NET +int board_eth_init (bd_t *bis) +{ + ? ? ? int rc = 0; +#ifdef CONFIG_CS8900 + ? ? ? rc = cs8900_initialize(0, CONFIG_CS8900_BASE); +#endif + ? ? ? return rc; +} +#endif board/gec/gec2410/gec2410_mem.h new file +118
-0@@ -0,0 +1,118 @@ +/* +* Memory Setup stuff - taken from blob memsetup.S +* +* Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and +* ? ? ? ? ? ? ? ? ? ? Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl) +* +* Taken from linux/arch/arm/boot/compressed/head-s3c2410.S +* +* Copyright (C) 2002 Samsung Electronics SW.LEE ?<[email protected]> +* +* Modified for the Samsung SMDK2410 by +* (C) Copyright 2002 +* David Mueller, ELSOFT AG, <[email protected]> +* +* Copyright (C) 2009 Hui Tang <[email protected]> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#define BWSCON 0x48000000 + +/* BWSCON */ +#define DW8 ? ? ? ? ? ? ? ? ? ?(0x0) +#define DW16 ? ? ? ? ? ? ? ? ? (0x1) +#define DW32 ? ? ? ? ? ? ? ? ? (0x2) +#define WAIT ? ? ? ? ? ? ? ? ? (0x1<<2) +#define UBLB ? ? ? ? ? ? ? ? ? (0x1<<3) + +#define B1_BWSCON ? ? ? ? ? ? ?(DW32) +#define B2_BWSCON ? ? ? ? ? ? ?(DW16) +#define B3_BWSCON ? ? ? ? ? ? ?(DW16 + WAIT + UBLB) +#define B4_BWSCON ? ? ? ? ? ? ?(DW16) +#define B5_BWSCON ? ? ? ? ? ? ?(DW16) +#define B6_BWSCON ? ? ? ? ? ? ?(DW32) +#define B7_BWSCON ? ? ? ? ? ? ?(DW32) + +/* BANK0CON */ +#define B0_Tacs ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ?/* ?0clk */ +#define B0_Tcos ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ?/* ?0clk */ +#define B0_Tacc ? ? ? ? ? ? ? ? ? ? ? ?0x7 ? ?/* 14clk */ +#define B0_Tcoh ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ?/* ?0clk */ +#define B0_Tah ? ? ? ? ? ? ? ? 0x0 ? ?/* ?0clk */ +#define B0_Tacp ? ? ? ? ? ? ? ? ? ? ? ?0x0 +#define B0_PMC ? ? ? ? ? ? ? ? 0x0 ? ?/* normal */ + +/* BANK1CON */ +#define B1_Tacs ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ?/* ?0clk */ +#define B1_Tcos ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ?/* ?0clk */ +#define B1_Tacc ? ? ? ? ? ? ? ? ? ? ? ?0x7 ? ?/* 14clk */ +#define B1_Tcoh ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ?/* ?0clk */ +#define B1_Tah ? ? ? ? ? ? ? ? 0x0 ? ?/* ?0clk */ +#define B1_Tacp ? ? ? ? ? ? ? ? ? ? ? ?0x0 +#define B1_PMC ? ? ? ? ? ? ? ? 0x0 + +#define B2_Tacs ? ? ? ? ? ? ? ? ? ? ? ?0x0 +#define B2_Tcos ? ? ? ? ? ? ? ? ? ? ? ?0x0 +#define B2_Tacc ? ? ? ? ? ? ? ? ? ? ? ?0x7 +#define B2_Tcoh ? ? ? ? ? ? ? ? ? ? ? ?0x0 +#define B2_Tah ? ? ? ? ? ? ? ? 0x0 +#define B2_Tacp ? ? ? ? ? ? ? ? ? ? ? ?0x0 +#define B2_PMC ? ? ? ? ? ? ? ? 0x0 + +#define B3_Tacs ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ?/* ?0clk */ +#define B3_Tcos ? ? ? ? ? ? ? ? ? ? ? ?0x3 ? ?/* ?4clk */ +#define B3_Tacc ? ? ? ? ? ? ? ? ? ? ? ?0x7 ? ?/* 14clk */ +#define B3_Tcoh ? ? ? ? ? ? ? ? ? ? ? ?0x1 ? ?/* ?1clk */ +#define B3_Tah ? ? ? ? ? ? ? ? 0x0 ? ?/* ?0clk */ +#define B3_Tacp ? ? ? ? ? ? ? ? ? ? ? ?0x3 ? ?/* ?6clk */ +#define B3_PMC ? ? ? ? ? ? ? ? 0x0 ? ?/* normal */ + +#define B4_Tacs ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ?/* ?0clk */ +#define B4_Tcos ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ?/* ?0clk */ +#define B4_Tacc ? ? ? ? ? ? ? ? ? ? ? ?0x7 ? ?/* 14clk */ +#define B4_Tcoh ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ?/* ?0clk */ +#define B4_Tah ? ? ? ? ? ? ? ? 0x0 ? ?/* ?0clk */ +#define B4_Tacp ? ? ? ? ? ? ? ? ? ? ? ?0x0 +#define B4_PMC ? ? ? ? ? ? ? ? 0x0 ? ?/* normal */ + +#define B5_Tacs ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ?/* ?0clk */ +#define B5_Tcos ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ?/* ?0clk */ +#define B5_Tacc ? ? ? ? ? ? ? ? ? ? ? ?0x7 ? ?/* 14clk */ +#define B5_Tcoh ? ? ? ? ? ? ? ? ? ? ? ?0x0 ? ?/* ?0clk */ +#define B5_Tah ? ? ? ? ? ? ? ? 0x0 ? ?/* ?0clk */ +#define B5_Tacp ? ? ? ? ? ? ? ? ? ? ? ?0x0 +#define B5_PMC ? ? ? ? ? ? ? ? 0x0 ? ?/* normal */ + +#define B6_MT ? ? ? ? ? ? ? ? ?0x3 ? ?/* SDRAM */ +#define B6_Trcd ? ? ? ? ? ? ? ? ? ? ? ?0x1 +#define B6_SCAN ? ? ? ? ? ? ? ? ? ? ? ?0x1 ? ?/* 9bit */ + +#define B7_MT ? ? ? ? ? ? ? ? ?0x3 ? ?/* SDRAM */ +#define B7_Trcd ? ? ? ? ? ? ? ? ? ? ? ?0x1 ? ?/* 3clk */ +#define B7_SCAN ? ? ? ? ? ? ? ? ? ? ? ?0x1 ? ?/* 9bit */ + +/* REFRESH parameter */ +#define REFEN ?0x1 ? ?/* Refresh enable */ +#define TREFMD 0x0 ? ?/* CBR(CAS before RAS)/Auto refresh */ +#define Trp ? ?0x0 ? ?/* 2clk */ +#define Trc ? ?0x3 ? ?/* 7clk */ +#define Tchr ? 0x2 ? ?/* 3clk */ +#define REFCNT 1113 ? ?/* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ +/**************************************/ board/gec/gec2410/lowlevel_init.S new file +93
-0@@ -0,0 +1,93 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and + * ? ? ? ? ? ? ? ? ? ? Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl) + * + * Modified for the Samsung SMDK2410 by + * (C) Copyright 2002 + * David Mueller, ELSOFT AG, <[email protected]> + * + * Copyright (C) 2009 Hui Tang <[email protected]> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include "gec2410_mem.h" + +_TEXT_BASE: + ? ? ? .word ? TEXT_BASE + +.globl lowlevel_init +lowlevel_init: +#if defined(CONFIG_NAND_SPL) || !defined(CONFIG_BOOT_NAND) + ? ? ? /* memory control configuration */ + ? ? ? /* make r0 relative the current location so that it */ + ? ? ? /* reads SMRDATA out of FLASH rather than memory ! */ + ? ? ? ldr ? ? r0, =SMRDATA + ? ? ? ldr ? ? r1, _TEXT_BASE + ? ? ? sub ? ? r0, r0, r1 + ? ? ? ldr ? ? r1, =BWSCON ? ? /* Bus Width Status Controller */ + ? ? ? add ? ? r2, r0, #13*4 +0: + ? ? ? ldr ? ? r3, [r0], #4 + ? ? ? str ? ? r3, [r1], #4 + ? ? ? cmp ? ? r2, r0 + ? ? ? bne ? ? 0b +#endif /* CONFIG_NAND_SPL */ + + ? ? ? /* everything is fine now */ + ? ? ? mov ? ? pc, lr + +/* dummy function, called by start_code() in cpu/arm920t/start.S */ +.globl coloured_LED_init +coloured_LED_init: + ? ? ? mov ? ? pc, lr + +/* dummy function, called by start_code() in cpu/arm920t/start.S */ +.globl red_LED_on +red_LED_on: + ? ? ? mov ? ? pc, lr + + ? ? ? .ltorg +/* the literal pools origin */ + +SMRDATA: + ? ?.word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12) ? ? \ + ? ? ? +(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) + ? ?.word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8) ? ?\ + ? ? ? +(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) + ? ?.word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8) ? ?\ + ? ? ? +(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) + ? ?.word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8) ? ?\ + ? ? ? +(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) + ? ?.word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8) ? ?\ + ? ? ? +(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) + ? ?.word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8) ? ?\ + ? ? ? +(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) + ? ?.word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8) ? ?\ + ? ? ? +(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) + ? ?.word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) + ? ?.word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) + ? ?.word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) + ? ?.word 0x32 + ? ?.word 0x30 + ? ?.word 0x30board/gec/gec2410/u-boot.lds new file +61
-0@@ -0,0 +1,61 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <[email protected]> + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, <[email protected]> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + ? ? ? . = 0x00000000; + + ? ? ? . = ALIGN(4); + ? ? ? .text ? ? ?: + ? ? ? { + ? ? ? ? cpu/arm920t/start.o ? (.text) + ? ? ? ? *(.text) + ? ? ? } + + ? ? ? . = ALIGN(4); + ? ? ? .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + ? ? ? . = ALIGN(4); + ? ? ? .data : { *(.data) } + + ? ? ? . = ALIGN(4); + ? ? ? .got : { *(.got) } + + ? ? ? __u_boot_cmd_start = .; + ? ? ? .u_boot_cmd : { *(.u_boot_cmd) } + ? ? ? __u_boot_cmd_end = .; + + ? ? ? . = ALIGN(4); + ? ? ? .mmudata : { *(.mmudata) } + + ? ? ? . = ALIGN(4); + ? ? ? __bss_start = .; + ? ? ? .bss : { *(.bss) . = ALIGN(4); } + ? ? ? _end = .; +}cpu/arm920t/s3c24x0/timer.c +3
-3@@ -186,9 +186,9 @@ ulong get_tbclk(void) ?#if defined(CONFIG_SMDK2400) || defined(CONFIG_TRAB) ? ? ? ?tbclk = timer_load_val * 100; -#elif defined(CONFIG_SBC2410X ) || \ - ? ? ?defined(CONFIG_SMDK2410) || \ - ? ? ?defined(CONFIG_VCMA9) +#elif defined(CONFIG_SYS_HZ ) && \ + ? ? !defined(CONFIG_SMDK2400) && \ + ? ? !defined(CONFIG_TRAB) ? ? ? ?tbclk = CONFIG_SYS_HZ;?#else
?# ? ? ?error "tbclk not configured"cpu/arm920t/start.S +0
-0@@ -38,6 +38,7 @@?.globl
_start
?_start: ? ? ? ?b ? ? ?start_code
+#ifndefCONFIG_NAND_SPL
? ? ? ?ldr ? ? pc,_undefined_instruction
? ? ? ?ldr ? ? pc,_software_interrupt
? ? ? ?ldr ? ? pc,_prefetch_abortcpu/arm920t/start.S +0
-0@@ -53,7 +54,13 @@ _data_abort: ? ? ? ? .word data_abort?_not_used: ? ? ? ? ? ? .word
not_used
?_irq: ? ? ? ? ? ? ? ? ?.word irq
?_fiq: ? ? ? ? ? ? ? ? ?.word fiqcpu/arm920t/start.S +6
-0+_pad: ? ? ? ? ? ? ? ? ?.word 0x12345678 /* now 16*4=64 */ +#else + ? ? ? . = _start + 64 +#endif +.global _end_vect +_end_vect:? ? ? ?.balignl 16,0xdeadbeef
cpu/arm920t/start.S +0
-0@@ -197,7 +204,11 @@ copy_loop:? ? ? ?/* Set up the stack ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? */ ?stack_setup:
+#ifndefCONFIG_NAND_SPL
? ? ? ?ldr ? ? r0,_TEXT_BASE? ? ? ? ?/* upper 128 KiB: relocated uboot ? */cpu/arm920t/start.S +3
-0+#else + ? ? ? ldr ? ? r0, =(CONFIG_SYS_UBOOT_BASE + CONFIG_SYS_UBOOT_SIZE) +#endif? ? ? ?sub ? ? r0, r0, #CONFIG_SYS_MALLOC_LEN ?/* malloc area ? ? ? ? ? ? ?*/ ? ? ? ?sub ? ? r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo ? ? ? ? ? ? ? ? */ ?#ifdef
CONFIG_USE_IRQcpu/arm920t/start.S +0
-0@@ -215,9 +226,13 @@ clbss_l:str ? ? ? ?r2, [r0] ? ? ? ? ? ? ? ?/* clear loop... ? ? ? ? ? ? ? ? ? ?*/? ? ? ?cmp ? ? r0, r1
? ? ? ?ble ? ?clbss_l+#ifndef
CONFIG_NAND_SPL
? ? ? ?ldr ? ? pc,_start_armboot?_start_armboot: ? ? ? ?.word
start_armbootcpu/arm920t/start.S +3
-0+#else + ? ? ? b ? ? ? nand_boot +#endif?/*
cpu/arm920t/start.S +0
-0@@ -234,6 +249,7 @@ _start_armboot: ? ? .word start_armboot?#ifndef
CONFIG_SKIP_LOWLEVEL_INIT
?cpu_init_crit:
+#ifndefCONFIG_NAND_SPL
? ? ? ?/*
? ? ? ? * flush v4 I/D caches
? ? ? ? */cpu/arm920t/start.S +0
-0@@ -250,6 +266,7 @@ cpu_init_crit:? ? ? ?orr ? ? r0, r0, #0x00000002 ? ? @ set bit 2 (A) Align ? ? ? ?orr ? ? r0, r0, #0x00001000 ? ? @ set bit 12 (I) I-Cache ? ? ? ?mcr ? ? p15, 0, r0, c1, c0, 0
+#endif /*CONFIG_NAND_SPL*/? ? ? ?/*
? ? ? ? * before relocating, we have to setup RAM timingcpu/arm920t/start.S +0
-0@@ -264,6 +281,7 @@ cpu_init_crit:? ? ? ?mov ? ? pc, lr
?#endif /*CONFIG_SKIP_LOWLEVEL_INIT*/+#ifndef
CONFIG_NAND_SPL
?/* ?************************************************************************* ?*cpu/arm920t/start.S +0
-0@@ -434,3 +452,4 @@ fiq:? ? ? ?bl ? ? ?do_fiq
?#endif
cpu/arm920t/start.S +1
-0+#endif /* CONFIG_NAND_SPL */include/configs/gec2410.h new file +249
-0@@ -0,0 +1,249 @@ +/* +* (C) Copyright 2002 +* Sysgo Real-Time Solutions, GmbH <www.elinos.com> +* Marius Groeger <[email protected]> +* Gary Jennejohn <[email protected]> +* David Mueller <[email protected]> +* +* Configuation settings for the GD-Embedded Software Center GEC2410 board. +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* +* High Level Configuration Options +* (easy to change) +*/ +#define CONFIG_ARM920T ? ? ? ? 1 ? ? ?/* This is an ARM920T Core ? ? ?*/ +#define CONFIG_S3C2410 ? ? ? ? 1 ? ? ?/* in a SAMSUNG S3C2410 SoC ? ? */ +#define CONFIG_GEC2410 ? ? ? ? 1 ? ? ?/* on a GEC2410 Board ? ? ? ? ? */ + +#define CONFIG_SYS_SDRAM_BASE ?0x30000000 + +/* input clock of PLL */ +#define CONFIG_SYS_CLK_FREQ ? ?12000000/* the GEC2410 has 12MHz input clock */ + +#if !defined(CONFIG_NAND_SPL ) && (TEXT_BASE >=0xc0000000 ) +#define CONFIG_ENABLE_MMU +#endif + +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG + +#define USE_920T_MMU ? ? ? ? ? 1 + +/* +* Size of malloc() pool +*/ +#define CONFIG_SYS_MALLOC_LEN ? ? ? ? ?(CONFIG_ENV_SIZE + 1024 * 1024) +#define CONFIG_SYS_GBL_DATA_SIZE ? ? ? 128 + +/* +* Hardware drivers +*/ +#define CONFIG_NET_MULTI +#define CONFIG_CS8900 ? ? ? ? ?/* we have a CS8900 on-board */ +#define CONFIG_CS8900_BASE ? ? 0x19000300 +#define CONFIG_CS8900_BUS16 ? ?/* the Linux driver does accesses as shorts */ + +/* +* select serial console configuration +*/ +#define CONFIG_S3C24X0_SERIAL ?1 +#define CONFIG_SERIAL1 ? ? ? ? ?1 ? ? ?/* we use SERIAL 1 on GEC2410 */ + +/************************************************************ +* RTC +************************************************************/ +#define ? ? ? ?CONFIG_RTC_S3C24X0 ? ? ?1 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE ? ? ? ? ? ? ? ?115200 + +/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* +* Command line configuration. +*/ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_NAND +#define CONFIG_CMD_PING + +/* +* Miscellaneous configurable options +*/ +#define CONFIG_SYS_LONGHELP ? ? ? ? ? ? ? ? ? ?/* undef to save memory ? ? ? */ +#define CONFIG_SYS_PROMPT ? ? ?"GEC2410#" ? ? ?/* Monitor Command Prompt ? ? */ +#define CONFIG_SYS_CBSIZE ? ? ?256 ? ? ? ? ? ?/* Console I/O Buffer Size ? ?*/ +#define CONFIG_SYS_PBSIZE ? ? ?384 ? ? ? ? ? ?/* Print Buffer Size ? ? ? ? ?*/ +#define CONFIG_SYS_MAXARGS ? ? 16 ? ? ? ? ? ? ?/* max number of command args */ +#define CONFIG_SYS_BARGSIZE ?CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size ?*/ + +#define CONFIG_SYS_MEMTEST_START ? ? ? \ + ? ? ? CONFIG_SYS_SDRAM_BASE ? ? ? ? ? ? ? ? ?/* memtest works on ? ? ? ? ? */ +#define CONFIG_SYS_MEMTEST_END ? ? ? ? \ + ? ? ? (CONFIG_SYS_SDRAM_BASE + 0x3e00000) ? ?/* 62 MB in DRAM ? ? ? ? ? ? ?*/ + +#define CONFIG_SYS_LOAD_ADDR ? CONFIG_SYS_SDRAM_BASE/* default load address */ +#define CONFIG_SYS_HZ ? ? ? ? ?1000 + +/* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE ? ? ?{ 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- +* Stack sizes +* +* The stack sizes are set up in start.S using the settings below +*/ +#define CONFIG_STACKSIZE ? ? ? 0x40000 ? ? ? ?/* regular stack 256KB */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ ? (4*1024) ? ? ? ?/* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ ? (4*1024) ? ? ? ?/* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- +* Physical Memory Map +*/ +#define CONFIG_NR_DRAM_BANKS ? 1 +#define PHYS_SDRAM_1 ? ? ? ? ? CONFIG_SYS_SDRAM_BASE ?/* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE ? ? ?0x04000000 ? ? ? ? ? ? ?/* 64 MB ? ? ? ? */ + +#define CONFIG_SYS_FLASH_BASE ?0x00000000 +#define CONFIG_SYS_MONITOR_BASE ? ? ? ?0x00000000 +#define PHYS_FLASH_1 ? ? ? ? ? CONFIG_SYS_FLASH_BASE + +/*----------------------------------------------------------------------- +* FLASH and environment organization +*/ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 ?/* max number of memory banks ? ? ? ?*/ +#define CONFIG_SYS_MAX_FLASH_SECT ?512/* max number of sectors on one chip */ + +#define CONFIG_SYS_FLASH_CFI ? ? ? ? ? 1 ?/* Use CFI parameters (needed?) */ +#define CONFIG_FLASH_CFI_DRIVER ? ? ? ? ? ? ? ?1 +#define CONFIG_SYS_FLASH_CFI_WIDTH ? ? FLASH_CFI_16BIT + +#define PHYS_FLASH_SIZE ? ? ? ? ? ? ? ?0x00200000 ? ? ?/* 2MB ? ? ? ? ? ? ? ? */ +#define CONFIG_ENV_ADDR ? ? ? ? ? ? ? ?\ + ? ? ? (CONFIG_SYS_FLASH_BASE + 0x040000) ? ? ?/* addr of environment */ + +/* timeout values are in ticks */ +#define CONFIG_SYS_FLASH_ERASE_TOUT ? ?\ + ? ? ? (5 * CONFIG_SYS_HZ) ? ? ? ? ? ? ? ? ? ?/* Timeout for Flash Erase */ +#define CONFIG_SYS_FLASH_WRITE_TOUT ? ?\ + ? ? ? (5 * CONFIG_SYS_HZ) ? ? ? ? ? ? ? ? ? ?/* Timeout for Flash Write */ + +#define CONFIG_ENV_SIZE ? ? ? ?0x020000 ?/* Total Size of Environment Parameters */ + +/* +* GEC2410 board specific data +*/ +#define CONFIG_IDENT_STRING ? ? ? ? ? ?" for GEC2410" + +/* base address for uboot */ +#define CONFIG_SYS_PHY_UBOOT_BASE ? ? ?(CONFIG_SYS_SDRAM_BASE + 0x03e00000) + +/* total memory available to uboot */ +#define CONFIG_SYS_UBOOT_SIZE ? ? ? ? ?(1024 * 1024) + +/* Put environment copies after the end of U-Boot owned RAM */ +#define CONFIG_NAND_ENV_DST ? ?(CONFIG_SYS_UBOOT_BASE + CONFIG_SYS_UBOOT_SIZE) + +#ifdef CONFIG_ENABLE_MMU +#define CONFIG_SYS_MAPPED_RAM_BASE ? ? 0xc0000000 +#define CONFIG_BOOTCOMMAND ? ? "nand read 0xc0008000 0x60000 0x1a0000;" \ + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? "bootm 0xc0008000" +#else +#define CONFIG_SYS_MAPPED_RAM_BASE ? ? CONFIG_SYS_SDRAM_BASE +#define CONFIG_BOOTCOMMAND ? ? "nand read 0x30008000 0x60000 0x1a0000;" \ + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? "bootm 0x30008000" +#endif + +/* NAND U-Boot load and start address */ +#define CONFIG_SYS_UBOOT_BASE ?(CONFIG_SYS_MAPPED_RAM_BASE + 0x03e00000) +#define CONFIG_ENV_OFFSET ? ? ?0x0040000/* Offset of Environment Sector */ + +/* NAND configuration */ +#define CONFIG_SYS_MAX_NAND_DEVICE ? ? 1 +#define CONFIG_SYS_NAND_BASE 0x4e00000c/* R/W NAND Flash data register */ +#define CONFIG_S3C2410_NAND_HWECC +#define CONFIG_S3C2410_NAND_BBT + +/* NUB load-addr ?*/ +#define CONFIG_SYS_NAND_U_BOOT_DST ? ? CONFIG_SYS_PHY_UBOOT_BASE +/* NUB start-addr */ +#define CONFIG_SYS_NAND_U_BOOT_START ? CONFIG_SYS_NAND_U_BOOT_DST + +/* Offset to RAM U-Boot image */ +#define CONFIG_SYS_NAND_U_BOOT_OFFS ? ?(4 * 1024) +/* Size of RAM U-Boot image ? */ +#define CONFIG_SYS_NAND_U_BOOT_SIZE ? ?(252 * 1024) + +/* NAND chip page size ? ? ? ? */ +#define CONFIG_SYS_NAND_PAGE_SIZE ? ? ?512 +/* NAND chip block size ? ? ? ? ? ? ? ?*/ +#define CONFIG_SYS_NAND_BLOCK_SIZE ? ? (16 * 1024) +/* NAND chip page per block count ?*/ +#define CONFIG_SYS_NAND_PAGE_COUNT ? ? 32 +/* Location of the bad-block label */ +#define CONFIG_SYS_NAND_BAD_BLOCK_POS ?5 ? ? ?/* mark the 6th OOB byte */ +/* Extra address cycle for > 32MiB */ +#define CONFIG_SYS_NAND_4_ADDR_CYCLE ? 1 ? ? ?/* Fourth addr used (>32MB) */ + +/* Size of the block protected by one OOB (Spare Area in Samsung terminology) */ +#define CONFIG_SYS_NAND_ECCSIZE CONFIG_SYS_NAND_PAGE_SIZE +/* Number of ECC bytes per OOB - S3C2410 calculates 4 bytes ECC in 1-bit mode */ +#define CONFIG_SYS_NAND_ECCBYTES ? ? ? 3 +/* Number of ECC-blocks per NAND page */ +#define CONFIG_SYS_NAND_ECCSTEPS ? ? ? \ + ? ? ? (CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE) +/* Size of a single OOB region */ +#define CONFIG_SYS_NAND_OOBSIZE ? ? ? ?16 +/* Number of ECC bytes per page */ +#define CONFIG_SYS_NAND_ECCTOTAL ? ? ? \ + ? ? ? (CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS) +/* ECC byte positions */ +#define CONFIG_SYS_NAND_ECCPOS ? ? ? ? {0, 1, 2} +#define CONFIG_SYS_64BIT_VSPRINTF ? ? ?/* needed for nand_util.c */ + +/* Boot configuration */ +#define CONFIG_BOOT_NAND +#define CONFIG_NAND +#define CONFIG_NAND_S3C2410 ? ? ? ? ? ?1 + +/* Settings as above boot configuration */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_BOOTARGS ? ? ? ? ? ? ? ?"console=ttySAC,115200" + +#endif /* __CONFIG_H */ nand_spl/board/gec/gec2410/Makefile new file +105
-0@@ -0,0 +1,105 @@ +# +# (C) Copyright 2006-2007 +# Stefan Roese, DENX Software Engineering, sr at denx.de. +# +# (C) Copyright 2008 +# Guennadi Liakhovetki, DENX Software Engineering, <[email protected]> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +CONFIG_NAND_SPL ? ? ? ? ? ? ? ? ? ? ? ?= y +CONFIG_SKIP_RELOCATE_UBOOT ? ? = y + +# TEXT_BASE for SPL: +# On S3C2410 platforms the SPL is located in SRAM at 0. +# + +TEXT_BASE = 0 + +sinclude $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk +sinclude $(TOPDIR)/config.mk + +LDSCRIPT = $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds +LDFLAGS ? ? ? ? = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) +AFLAGS += -DCONFIG_NAND_SPL -DCONFIG_SKIP_RELOCATE_UBOOT +CFLAGS += -DCONFIG_NAND_SPL -DCONFIG_SKIP_RELOCATE_UBOOT + +SOBJS ?= start.o lowlevel_init.o +COBJS ?= nand_boot.o s3c2410_nand.o + +SRCS ? := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) +OBJS ? := $(addprefix $(obj),$(SOBJS) $(COBJS)) +__OBJS := $(SOBJS) $(COBJS) +LNDIR ?:= $(OBJTREE)/nand_spl/board/$(BOARDDIR) + +nandobj ? ? ? ?:= $(OBJTREE)/nand_spl/ + +ALL ? ?= $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin + +all: ? $(obj).depend $(ALL) + +$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl + ? ? ? $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ + +$(nandobj)u-boot-spl.bin: ? ? ?$(nandobj)u-boot-spl + ? ? ? $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ + +$(nandobj)u-boot-spl: ?$(OBJS) $(nandobj)u-boot.lds + ? ? ? cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \ + ? ? ? ? ? ? ? -Map $(nandobj)u-boot-spl.map \ + ? ? ? ? ? ? ? -o $(nandobj)u-boot-spl + +$(nandobj)u-boot.lds: $(LDSCRIPT) + ? ? ? $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ + +# create symbolic links for common files +# from cpu directory +$(obj)start.S: + ? ? ? @rm -f $@ + ? ? ? @ln -s $(TOPDIR)/cpu/arm920t/start.S $@ + +# from board directory +$(obj)lowlevel_init.S: + ? ? ? @rm -f $@ + ? ? ? @ln -s $(TOPDIR)/board/gec/gec2410/lowlevel_init.S $@ + +# from nand_spl directory +$(obj)nand_boot.c: + ? ? ? @rm -f $@ + ? ? ? @ln -s $(TOPDIR)/nand_spl/nand_boot.c $@ + +# from drivers/mtd/nand directory +$(obj)s3c2410_nand.c: + ? ? ? @rm -f $@ + ? ? ? @ln -s $(TOPDIR)/drivers/mtd/nand/s3c2410_nand.c $@ + +######################################################################### + +$(obj)%.o: ? ? $(obj)%.S + ? ? ? $(CC) $(AFLAGS) -c -o $@ $< + +$(obj)%.o: ? ? $(obj)%.c + ? ? ? $(CC) $(CFLAGS) -c -o $@ $< + +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +#########################################################################nand_spl/board/gec/gec2410/config.mk new file +32
-0@@ -0,0 +1,32 @@ +# +# (C) Copyright 2006 +# Stefan Roese, DENX Software Engineering, sr at denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# +# GEC2410 Study Platform (gec2410) board + +# PAD_TO used to generate a 4kByte binary needed for the combined image +# -> PAD_TO = TEXT_BASE + 4096 +PAD_TO := 0x00001000 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endifnand_spl/board/gec/gec2410/u-boot.lds new file +60
-1@@ -0,0 +1,60 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <[email protected]> + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, <[email protected]> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + ? ? ? . = 0x00000000; + + ? ? ? . = ALIGN(4); + ? ? ? .text ? ? ?: + ? ? ? { + ? ? ? ? start.o ? ? ? (.text) + ? ? ? ? nand_boot.o ? (.text) + + ? ? ? ? *(.text) + ? ? ? } + + ? ? ? . = ALIGN(4); + ? ? ? .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + ? ? ? . = ALIGN(4); + ? ? ? .data : { *(.data) } + + ? ? ? . = ALIGN(4); + ? ? ? .got : { *(.got) } + + ? ? ? __u_boot_cmd_start = .; + ? ? ? .u_boot_cmd : { *(.u_boot_cmd) } + ? ? ? __u_boot_cmd_end = .; + + ? ? ? . = ALIGN(4); + ? ? ? __bss_start = .; + ? ? ? .bss : { *(.bss) . = ALIGN(4); } + ? ? ? _end = .; +} --
Quoted 3 lines
1.6.3.3
You already sent v2 patch.
please resend v3 patch.
and please see my comment.
http://lists.denx.de/pipermail/u-boot/2009-November/064051.html
Thanks
Minkyu Kang
Signature · 2 lines
from. prom. www.promsoft.net