SMDK6410 SPI: Added spidev support as an example
Subsystems (3)
PATCH 6/6 SMDK6410 SPI: Added spidev support as an example
As an illustration of using the newly implemented SPI driver, 'spidev' master device has been enabled on SMDK6410.
--- arch/arm/mach-s3c6410/mach-smdk6410.c | 47 +++++++++++++++++++++++++++++++++ 1 files changed, 47 insertions(+), 0 deletions(-)
arch/arm/mach-s3c6410/mach-smdk6410.c +47 -0
@@ -25,6 +25,7 @@#include <linux/gpio.h> #include <linux/delay.h> #include <linux/smsc911x.h> +#include <linux/spi/spi.h> #ifdef CONFIG_SMDK6410_WM1190_EV1 #include <linux/mfd/wm8350/core.h>
@@ -49,8 +50,10 @@#include <plat/regs-gpio.h> #include <plat/regs-sys.h> #include <plat/iic.h> +#include <plat/spi.h> #include <plat/fb.h> #include <plat/gpio-cfg.h> +#include <plat/gpio-bank-c.h> #include <plat/s3c6410.h> #include <plat/clock.h>
@@ -193,6 +196,7 @@ static struct platform_device *smdk6410_devices[] __initdata = {#ifdef CONFIG_SMDK6410_SD_CH1 &s3c_device_hsmmc1, #endif + &s3c64xx_device_spi0, &s3c_device_i2c0, &s3c_device_i2c1, &s3c_device_fb,
@@ -351,6 +355,40 @@ static struct i2c_board_info i2c_devs1[] __initdata = { { I2C_BOARD_INFO("24c128", 0x57), }, /* Samsung S524AD0XD1 */ }; +static void smdk6410_spidev_cs_set_level (int high) +{ +u32 val; + + val =readl (S3C64XX_GPCDAT ); + +if (high) + val |= (1 <<3 ); +else + val &= ~(1 <<3 ); + +writel (val,S3C64XX_GPCDAT ); +} + +#define SMDK6410_SPIDEV_CS 0 + +static struct s3c64xx_spi_csinfo smdk6410_spi0_csi[] = { + [SMDK6410_SPIDEV_CS ] = { + .set_level = smdk6410_spidev_cs_set_level, + .fb_delay =0x3 ,/* 9ns feedback delay */ + }, +}; + +static struct spi_board_info smdk6410_spi_devices[]__initdata = { + { + .modalias ="spidev" , + .mode =SPI_MODE_0 , + .max_speed_hz =4000000 , + .bus_num =0 , + .chip_select =0 , + .controller_data = &smdk6410_spi1_csi[SMDK6410_SPIDEV_CS ], + }, +}; +static void __init smdk6410_map_io (void ) {u32 tmp;
@@ -385,6 +423,15 @@ static void __init smdk6410_machine_init(void)i2c_register_board_info (0 , i2c_devs0,ARRAY_SIZE (i2c_devs0));i2c_register_board_info (1 , i2c_devs1,ARRAY_SIZE (i2c_devs1)); +/* SPI Controller-0 generates its clocks from PCLK and +* emulates ARRAY_SIZE(smdk6410_spi0_csi) chipselects. +*/ +s3c64xx_spi_set_info (BUSNUM (0 ),S3C64XX_SPI_SRCCLK_PCLK , +ARRAY_SIZE (smdk6410_spi0_csi)); + +spi_register_board_info (smdk6410_spi_devices, +ARRAY_SIZE (smdk6410_spi_devices)); +platform_add_devices (smdk6410_devices,ARRAY_SIZE (smdk6410_devices)); }
Signature · 1 line
1.6.2.5
arch/arm/mach-s3c6410/mach-smdk6410.c static struct i2c_board_info i2c_devs1[] __initdata = { · line 370
Quoted 13 lines · Jassi Brar
arch/arm/mach-s3c6410/mach-smdk6410.c +13
-0+static void smdk6410_spidev_cs_set_level (int high) +{ +u32 val; + + val =readl (S3C64XX_GPCDAT ); + +if (high) + val |= (1 <<3 ); +else + val &= ~(1 <<3 ); + +writel (val,S3C64XX_GPCDAT ); +}
This should be using gpiolib, I suspect.
Quoted 17 lines · Mark Brown
arch/arm/mach-s3c6410/mach-smdk6410.c static struct i2c_board_info i2c_devs1[] __initdata = { · line 370
Quoted 13 lines · Jassi Brar
arch/arm/mach-s3c6410/mach-smdk6410.c +13
-0+static void smdk6410_spidev_cs_set_level (int high) +{ + u32 val; + + val = readl(S3C64XX_GPCDAT); + + if (high) + val |= (1<<3); + else + val &= ~(1<<3); + + writel(val, S3C64XX_GPCDAT); +}This should be using gpiolib, I suspect.
yes, that wud be more appropriate. thanks.
Also, i anticipate objections to the utility of a spidev device when smdk6410 doesn't even have convenient pins to tap the SPI signals.
Quoted 2 lines · jassi brar
Also, i anticipate objections to the utility of a spidev device when smdk6410 doesn't even have convenient pins to tap the SPI signals.
It does have the expansion ports under the LCD, though.