USB: ftdi_sio: fix initialisation of latency timeout
Subsystems (2)
PATCH 1/1 USB: ftdi_sio: fix initialisation of latency timeout
Latency timeout was read but never stored on port probe. When ASYNC_LOW_LATENCY was cleared the device timeout would get set to 0 rather than the default 16ms.
Signed-off-by Johan Hovold <[email protected]>
--- drivers/usb/serial/ftdi_sio.c | 9 +++++---- 1 files changed, 5 insertions(+), 4 deletions(-)
drivers/usb/serial/ftdi_sio.c +5 -4
@@ -1150,7 +1150,6 @@ static int read_latency_timer(struct usb_serial_port *port)unsigned short latency =0 ;int rv =0 ; -dbg ("%s" , __func__); rv = usb_control_msg(udev,
@@ -1163,8 +1162,9 @@ static int read_latency_timer(struct usb_serial_port *port)if (rv <0 ) {dev_err (&port->dev,"Unable to read latency timer: %i\n" , rv);return -EIO ; - } -return latency; + }else + priv->latency = latency; +return rv; } static int get_serial_info(struct usb_serial_port *port,
@@ -1551,7 +1551,8 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)ftdi_determine_type (port);ftdi_set_max_packet_size (port); -read_latency_timer (port); +if (read_latency_timer (port) <0 ) + priv->latency =16 ;create_sysfs_attrs (port);return 0 ; }
Signature · 1 line
1.6.5.3