Skip to contentSkip to conversation

ARM: U8500 register definitions

PATCH New srinidhi kasagar 1 participant 1 message Nov 26, 2009

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v4 1/6 ARM: U8500 register definitions

From: srinidhi kasagar <[email protected]>
Date: Fri, 27 Nov 2009 15:28:17 +0530

Adds register definitions, shared peripheral interrupt numbers (SHPI) and IO mappings for the U8500 core support. SHPI are assigned to [160:32] where first 32 interrupts are reserved.

---
 arch/arm/mach-ux500/include/mach/hardware.h |  131 +++++++++++++++++++++++++++
 arch/arm/mach-ux500/include/mach/io.h       |   22 +++++
 arch/arm/mach-ux500/include/mach/irqs.h     |   71 +++++++++++++++
 3 files changed, 224 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-ux500/include/mach/hardware.h
 create mode 100644 arch/arm/mach-ux500/include/mach/io.h
 create mode 100644 arch/arm/mach-ux500/include/mach/irqs.h
arch/arm/mach-ux500/include/mach/hardware.h new file +131 -0
new file mode 100644
index 0000000..6da6502
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * U8500 hardware definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+/* macros to get at IO space when running virtually
+ * We dont map all the peripherals, let ioremap do
+ * this for us. We map only very basic peripherals here.
+ */
+#define U8500_IO_VIRTUAL	0xf0000000
+#define U8500_IO_PHYSICAL	0xa0000000
+
+/* this macro is used in assembly, so no cast */
+#define IO_ADDRESS(x)           \
+	(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
+
+/* typesafe io address */
+#define __io_address(n)		__io(IO_ADDRESS(n))
+
+/*
+ * Base address definitions for U8500 Onchip IPs. All the
+ * peripherals are contained in a single 1 Mbyte region, with
+ * AHB peripherals at the bottom and APB peripherals at the
+ * top of the region. PER stands for PERIPHERAL region which
+ * itself divided into sub regions.
+ */
+#define U8500_PER3_BASE		0x80000000
+#define U8500_PER2_BASE		0x80110000
+#define U8500_PER1_BASE		0x80120000
+#define U8500_PER4_BASE		0x80150000
+
+#define U8500_PER6_BASE		0xa03c0000
+#define U8500_PER5_BASE		0xa03e0000
+#define U8500_PER7_BASE		0xa03d0000
+
+#define U8500_SVA_BASE		0xa0100000
+#define U8500_SIA_BASE		0xa0200000
+
+#define U8500_SGA_BASE		0xa0300000
+#define U8500_MCDE_BASE		0xa0350000
+#define U8500_DMA_BASE		0xa0362000
+
+#define U8500_SCU_BASE		0xa0410000
+#define U8500_GIC_CPU_BASE	0xa0410100
+#define U8500_TWD_BASE		0xa0410600
+#define U8500_GIC_DIST_BASE	0xa0411000
+#define U8500_L2CC_BASE		0xa0412000
+
+#define U8500_TWD_SIZE		0x100
+
+/* per7 base addressess */
+#define U8500_CR_BASE		(U8500_PER7_BASE + 0x8000)
+#define U8500_MTU0_BASE		(U8500_PER7_BASE + 0xa000)
+#define U8500_MTU1_BASE		(U8500_PER7_BASE + 0xb000)
+#define U8500_TZPC0_BASE	(U8500_PER7_BASE + 0xc000)
+#define U8500_CLKRST7_BASE	(U8500_PER7_BASE + 0xf000)
+
+/* per6 base addressess */
+#define U8500_RNG_BASE		(U8500_PER6_BASE + 0x0000)
+#define U8500_PKA_BASE		(U8500_PER6_BASE + 0x1000)
+#define U8500_PKAM_BASE		(U8500_PER6_BASE + 0x2000)
+#define U8500_CRYPTO0_BASE	(U8500_PER6_BASE + 0xa000)
+#define U8500_CRYPTO1_BASE	(U8500_PER6_BASE + 0xb000)
+#define U8500_CLKRST6_BASE	(U8500_PER7_BASE + 0xf000)
+
+/* per5 base addressess */
+#define U8500_USBOTG_BASE	(U8500_PER5_BASE + 0x00000)
+#define U8500_GPIO5_BASE	(U8500_PER5_BASE + 0x1e000)
+#define U8500_CLKRST5_BASE	(U8500_PER7_BASE + 0x1f000)
+
+/* per4 base addressess */
+#define U8500_BACKUPRAM0_BASE	(U8500_PER4_BASE + 0x0000)
+#define U8500_BACKUPRAM1_BASE	(U8500_PER4_BASE + 0x1000)
+#define U8500_RTT0_BASE		(U8500_PER4_BASE + 0x2000)
+#define U8500_RTT1_BASE		(U8500_PER4_BASE + 0x3000)
+#define U8500_RTC_BASE		(U8500_PER4_BASE + 0x4000)
+#define U8500_SCR_BASE		(U8500_PER4_BASE + 0x5000)
+#define U8500_DMC_BASE		(U8500_PER4_BASE + 0x6000)
+#define U8500_PRCMU_BASE	(U8500_PER4_BASE + 0x7000)
+
+/* per3 base addressess */
+#define U8500_FSMC_BASE		(U8500_PER3_BASE + 0x0000)
+#define U8500_SSP0_BASE		(U8500_PER3_BASE + 0x2000)
+#define U8500_SSP1_BASE		(U8500_PER3_BASE + 0x3000)
+#define U8500_I2C0_BASE		(U8500_PER3_BASE + 0x4000)
+#define U8500_SDI2_BASE		(U8500_PER3_BASE + 0x5000)
+#define U8500_SKE_BASE		(U8500_PER3_BASE + 0x6000)
+#define U8500_UART2_BASE	(U8500_PER3_BASE + 0x7000)
+#define U8500_SDI5_BASE		(U8500_PER3_BASE + 0x8000)
+#define U8500_GPIO3_BASE	(U8500_PER3_BASE + 0xe000)
+#define U8500_CLKRST3_BASE	(U8500_PER7_BASE + 0xf000)
+
+/* per2 base addressess */
+#define U8500_I2C3_BASE		(U8500_PER2_BASE + 0x0000)
+#define U8500_SPI2_BASE		(U8500_PER2_BASE + 0x1000)
+#define U8500_SPI1_BASE		(U8500_PER2_BASE + 0x2000)
+#define U8500_PWL_BASE		(U8500_PER2_BASE + 0x3000)
+#define U8500_SDI4_BASE		(U8500_PER2_BASE + 0x4000)
+#define U8500_MSP2_BASE		(U8500_PER2_BASE + 0x7000)
+#define U8500_SDI1_BASE		(U8500_PER2_BASE + 0x8000)
+#define U8500_SDI3_BASE		(U8500_PER2_BASE + 0x9000)
+#define U8500_SPI0_BASE		(U8500_PER2_BASE + 0xa000)
+#define U8500_HSIR_BASE		(U8500_PER2_BASE + 0xb000)
+#define U8500_HSIT_BASE		(U8500_PER2_BASE + 0xc000)
+#define U8500_GPIO2_BASE	(U8500_PER2_BASE + 0xe000)
+#define U8500_CLKRST2_BASE	(U8500_PER2_BASE + 0xf000)
+
+/* per1 base addresses */
+#define U8500_UART0_BASE	(U8500_PER1_BASE + 0x0000)
+#define U8500_UART1_BASE	(U8500_PER1_BASE + 0x1000)
+#define U8500_I2C1_BASE		(U8500_PER1_BASE + 0x2000)
+#define U8500_MSP0_BASE		(U8500_PER1_BASE + 0x3000)
+#define U8500_MSP1_BASE		(U8500_PER1_BASE + 0x4000)
+#define U8500_SDI0_BASE		(U8500_PER1_BASE + 0x6000)
+#define U8500_I2C2_BASE		(U8500_PER1_BASE + 0x8000)
+#define U8500_SPI3_BASE		(U8500_PER1_BASE + 0x9000)
+#define U8500_SLIM0_BASE	(U8500_PER1_BASE + 0xa000)
+#define U8500_GPIO1_BASE	(U8500_PER1_BASE + 0xe000)
+#define U8500_CLKRST1_BASE	(U8500_PER2_BASE + 0xf000)
+
+/* ST-Ericsson modified pl022 id */
+#define SSP_PER_ID		0x01080022
+
+#endif				/* __MACH_HARDWARE_H */
arch/arm/mach-ux500/include/mach/io.h new file +22 -0
new file mode 100644
index 0000000..1cf3f44
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-u8500/include/mach/io.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ *  06-12-1997	RMK	Created.
+ *  07-04-1999	RMK	Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif
arch/arm/mach-ux500/include/mach/irqs.h new file +71 -0

71 lines not on this page · raw message

Signature · 1 line
1.6.3.GIT