ARM: U8500 core machine support
Subsystems (3)
PATCH v4 3/6 ARM: U8500 core machine support
From: srinidhi kasagar <[email protected]>
Date: Fri, 27 Nov 2009 15:40:59 +0530
Adds core support for the ST-Ericsson U8500
platform. It supports memory mappings, binds to
the existing modules like GIC, SCU, TWD and
local timers and sets up the infrastructure for
the secondary core.
--- arch/arm/mach-ux500/Kconfig | 15 ++ arch/arm/mach-ux500/Makefile | 8 + arch/arm/mach-ux500/board-mop500.c | 158 +++++++++++++++++++++ arch/arm/mach-ux500/cpu-u8500.c | 64 +++++++++ arch/arm/mach-ux500/headsmp.S | 38 +++++ arch/arm/mach-ux500/include/mach/debug-macro.S | 19 +++ arch/arm/mach-ux500/include/mach/entry-macro.S | 89 ++++++++++++ arch/arm/mach-ux500/include/mach/memory.h | 18 +++ arch/arm/mach-ux500/include/mach/setup.h | 23 +++ arch/arm/mach-ux500/include/mach/smp.h | 32 +++++ arch/arm/mach-ux500/include/mach/system.h | 25 ++++ arch/arm/mach-ux500/include/mach/timex.h | 6 + arch/arm/mach-ux500/include/mach/uncompress.h | 58 ++++++++ arch/arm/mach-ux500/include/mach/vmalloc.h | 18 +++ arch/arm/mach-ux500/localtimer.c | 28 ++++ arch/arm/mach-ux500/platsmp.c | 177 ++++++++++++++++++++++++ 16 files changed, 776 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-ux500/Kconfig create mode 100644 arch/arm/mach-ux500/Makefile create mode 100644 arch/arm/mach-ux500/board-mop500.c create mode 100644 arch/arm/mach-ux500/cpu-u8500.c create mode 100644 arch/arm/mach-ux500/headsmp.S create mode 100644 arch/arm/mach-ux500/include/mach/debug-macro.S create mode 100644 arch/arm/mach-ux500/include/mach/entry-macro.S create mode 100644 arch/arm/mach-ux500/include/mach/memory.h create mode 100644 arch/arm/mach-ux500/include/mach/setup.h create mode 100644 arch/arm/mach-ux500/include/mach/smp.h create mode 100644 arch/arm/mach-ux500/include/mach/system.h create mode 100644 arch/arm/mach-ux500/include/mach/timex.h create mode 100644 arch/arm/mach-ux500/include/mach/uncompress.h create mode 100644 arch/arm/mach-ux500/include/mach/vmalloc.h create mode 100644 arch/arm/mach-ux500/localtimer.c create mode 100644 arch/arm/mach-ux500/platsmp.c
arch/arm/mach-ux500/Kconfig new file +15 -0
@@ -0,0 +1,15 @@ +menu "ST-Ericsson platform type" + depends on ARCH_U8500 + +comment "ST-Ericsson Multicore Mobile Platforms" + +config MACH_U8500_MOP + bool "U8500 Early Development platform" + default y + select ARM_GIC + select HAS_MTU + help + Include support for mop500 development platform + based on U8500 architecture. The platform is based + on early drop silicon version of 8500. +endmenu
arch/arm/mach-ux500/Makefile new file +8 -0
@@ -0,0 +1,8 @@ +# +# Makefile for the linux kernel, U8500 machine. +# + +obj-y := clock.o +obj-$(CONFIG_ARCH_U8500) += cpu-u8500.o +obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o
arch/arm/mach-ux500/board-mop500.c new file +158 -0
158 lines not on this page · raw message
arch/arm/mach-ux500/cpu-u8500.c new file +64 -0
64 lines not on this page · raw message
arch/arm/mach-ux500/headsmp.S new file +38 -0
@@ -0,0 +1,38 @@ +/* + * Copyright (c) 2009 ST-Ericsson + * This file is based ARM Realview platform + * Copyright (c) 2003 ARM Limited + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <linux/init.h> + + __INIT + +/* + * U8500 specific entry point for secondary CPUs. + */ +ENTRY(u8500_secondary_startup) + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #15 + adr r4, 1f + ldmia r4, {r5, r6} + sub r4, r4, r5 + add r6, r6, r4 + dsb +pen: ldr r7, [r6] + cmp r7, r0 + bne pen + + /* + * we've been released from the holding pen: secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup + +1: .long . + .long pen_release
arch/arm/mach-ux500/include/mach/debug-macro.S new file +19 -0
@@ -0,0 +1,19 @@ +/* + * Debugging macro include header + * + * Copyright (C) 2009 ST-Ericsson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @MMU enabled? + moveq \rx, #0x80000000 @MMU off, Physical address + movne \rx, #0xF0000000 @MMU on, Virtual address + orr \rx, \rx, #0x7000 + .endm + +#include <asm/hardware/debug-pl01x.S>
arch/arm/mach-ux500/include/mach/entry-macro.S new file +89 -0
89 lines not on this page · raw message
arch/arm/mach-ux500/include/mach/memory.h new file +18 -0
@@ -0,0 +1,18 @@ +/* +* Copyright (C) 2009 ST-Ericsson +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +*/ +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* +* Physical DRAM offset. +*/ +#define PHYS_OFFSET UL(0x00000000) +#define BUS_OFFSET UL(0x00000000) + +#endif
arch/arm/mach-ux500/include/mach/setup.h new file +23 -0
@@ -0,0 +1,23 @@ +/* +* Copyright (C) 2009 ST-Ericsson. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +* These symbols are needed for board-specific files to call their +* own cpu-specific files +*/ +#ifndef __ASM_ARCH_SETUP_H +#define __ASM_ARCH_SETUP_H + +#include <asm/mach/time.h> +#include <linux/init.h> + +extern void u8500_map_io (void ); +extern void u8500_init_devices (void ); +extern void u8500_init_irq (void ); +/* We re-use nomadik_timer for this platform */ +extern void nmdk_timer_init (void ); + +#endif /* __ASM_ARCH_SETUP_H */
arch/arm/mach-ux500/include/mach/smp.h new file +32 -0
@@ -0,0 +1,32 @@ +/* +* This file is based ARM realview platform. +* Copyright (C) ARM Limited. +* +* This file is licensed under the terms of the GNU General Public +* License version 2. This program is licensed "as is" without any +* warranty of any kind, whether express or implied. +*/ +#ifndef ASMARM_ARCH_SMP_H +#define ASMARM_ARCH_SMP_H + +#include <asm/hardware/gic.h> + +/* This is required to wakeup the secondary core */ +extern void u8500_secondary_startup (void ); + +#define hard_smp_processor_id () \ + ({ \ + unsigned int cpunum; \ + __asm__("mrc p15, 0, %0, c0, c0, 5" \ + : "=r" (cpunum)); \ + cpunum &= 0x0F; \ + }) + +/* +* We use IRQ1 as the IPI +*/ +static inline void smp_cross_call (const struct cpumask *mask) +{ +gic_raise_softirq (mask,1 ); +} +#endif
arch/arm/mach-ux500/include/mach/system.h new file +25 -0
@@ -0,0 +1,25 @@ +/* +* Copyright (C) 2009 ST-Ericsson. +* +* This file is licensed under the terms of the GNU General Public +* License version 2. This program is licensed "as is" without any +* warranty of any kind, whether express or implied. +*/ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle (void ) +{ +/* +* This should do all the clock switching +* and wait for interrupt tricks +*/ +cpu_do_idle (); +} + +static inline void arch_reset (char mode,const char *cmd) +{ +/* yet to be implemented - TODO */ +} + +#endif
arch/arm/mach-ux500/include/mach/timex.h new file +6 -0
@@ -0,0 +1,6 @@ +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H + +#define CLOCK_TICK_RATE 110000000 + +#endif
arch/arm/mach-ux500/include/mach/uncompress.h new file +58 -0
58 lines not on this page · raw message
arch/arm/mach-ux500/include/mach/vmalloc.h new file +18 -0
@@ -0,0 +1,18 @@ +/* +* Copyright (C) 2009 ST-Ericsson +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ +#define VMALLOC_END 0xf0000000
arch/arm/mach-ux500/localtimer.c new file +28 -0
@@ -0,0 +1,28 @@ +/* +* Copyright (C) 2008-2009 ST-Ericsson +* Srinidhi Kasagar <[email protected]> +* +* This file is heavily based on relaview platform, almost a copy. +* +* Copyright (C) 2002 ARM Ltd. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/clockchips.h> + +#include <asm/irq.h> +#include <asm/smp_twd.h> +#include <asm/localtimer.h> + +/* +* Setup the local clock events for a CPU. +*/ +void __cpuinit local_timer_setup (struct clock_event_device *evt) +{ + evt->irq =IRQ_LOCALTIMER ; +twd_timer_setup (evt); +}
arch/arm/mach-ux500/platsmp.c new file +177 -0
177 lines not on this page · raw message
Signature · 1 line
1.6.3.GIT
PATCH v4 3/6 ARM: U8500 core machine support
... going back to this patch...
arch/arm/mach-ux500/headsmp.S line 26
Quoted 11 lines · srinidhi kasagar
arch/arm/mach-ux500/headsmp.S new file +11
-0+/* + * U8500 specific entry point for secondary CPUs. + */ +ENTRY(u8500_secondary_startup) + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #15 + adr r4, 1f + ldmia r4, {r5, r6} + sub r4, r4, r5 + add r6, r6, r4 + dsb
Can you please explain why you added a dsb here, whereas most other platforms don't require it?
Quoted 12 lines
arch/arm/mach-ux500/headsmp.S new file +12
-0+pen: ldr r7, [r6] + cmp r7, r0 + bne pen + + /* + * we've been released from the holding pen: secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup + +1: .long . + .long pen_release
PATCH v4 3/6 ARM: U8500 core machine support
Quoted 11 lines
-----Original Message-----
From: Russell King - ARM Linux [mailto:linux at arm.linux.org.uk]
Sent: Sunday, December 19, 2010 4:39 PM
To: Srinidhi KASAGAR
Cc: linux-arm-kernel at lists.infradead.org;STEricsson_nomadik_linux; Andrea GALLO; rubini at unipv.it
Subject: Re: [PATCH v4 3/6] ARM: U8500 core machine support... going back to this patch...
On Fri, Nov 27, 2009 at 05:25:56AM +0530, srinidhi kasagar wrote:
Quoted 14 lines
arch/arm/mach-ux500/headsmp.S line 26
Quoted 11 lines
arch/arm/mach-ux500/headsmp.S new file +11
-0+/* + * U8500 specific entry point for secondary CPUs. + */ +ENTRY(u8500_secondary_startup) + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #15 + adr r4, 1f + ldmia r4, {r5, r6} + sub r4, r4, r5 + add r6, r6, r4 + dsbCan you please explain why you added a dsb here, whereas most other platforms don't require it?
No reason, you can safely ignore this. I can send a patch to remove this if you need.
srinidhi
PATCH v4 3/6 ARM: U8500 core machine support
Quoted 26 lines · Srinidhi KASAGAR
Quoted 11 lines
-----Original Message-----
From: Russell King - ARM Linux [mailto:linux at arm.linux.org.uk]
Sent: Sunday, December 19, 2010 4:39 PM
To: Srinidhi KASAGAR
Cc: linux-arm-kernel at lists.infradead.org;STEricsson_nomadik_linux; Andrea GALLO; rubini at unipv.it
Subject: Re: [PATCH v4 3/6] ARM: U8500 core machine support... going back to this patch...
On Fri, Nov 27, 2009 at 05:25:56AM +0530, srinidhi kasagar wrote:
Quoted 14 lines
arch/arm/mach-ux500/headsmp.S line 26
Quoted 11 lines
arch/arm/mach-ux500/headsmp.S new file +11
-0+/* + * U8500 specific entry point for secondary CPUs. + */ +ENTRY(u8500_secondary_startup) + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #15 + adr r4, 1f + ldmia r4, {r5, r6} + sub r4, r4, r5 + add r6, r6, r4 + dsbCan you please explain why you added a dsb here, whereas most other platforms don't require it?
Quoted 2 lines
No reason, you can safely ignore this. I can send a patch to remove this if you need.
It would be better to have all the pen_release implementations without spurious differences when the differences aren't necessary.
So, yes please.