Skip to contentSkip to conversation

af9015: tuner id:179 not supported, please report!

DISCUSSION Jan Sundman 4 participants 9 messages Dec 1, 2009 – Dec 20, 2009 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hi,

I just received a usb DVB-T card and have been trying to get it to work under Ubuntu 9.10, but to no avail. dmesg shows the following when plugging in the card:

[   35.280024] usb 2-1: new high speed USB device using ehci_hcd and
address 4
[   35.435978] usb 2-1: configuration #1 chosen from 1 choice
[   35.450176] af9015: tuner id:179 not supported, please report!
[   35.452891] Afatech DVB-T 2: Fixing fullspeed to highspeed interval:
10 -> 7
[   35.453097] input: Afatech DVB-T 2
as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.1/input/input8
[   35.453141] generic-usb 0003:15A4:9016.0005: input,hidraw3: USB HID

v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:13.2-1/input1

lsusb shows:
Bus 002 Device 005: ID 15a4:9016

and finally lsmod | grep dvb

dvb_usb_af9015         37152  0 
dvb_usb                22892  1 dvb_usb_af9015
dvb_core              109716  1 dvb_usb

While googling for an answer to my troubles I came across
http://ubuntuforums.org/showthread.php?t=606487&page=5 which hints that the card may use the TDA18218HK tuner chip which does not seem to be supported currently.

Does anyone have any experience regarding this chip and know what to do to get it working.

Best regards,

//Jan

#1 lore raw
Quoted 31 lines · Jan Sundman <jan.sundman <at> aland.net> writes:

Hi,

I just received a usb DVB-T card and have been trying to get it to work under Ubuntu 9.10, but to no avail. dmesg shows the following when plugging in the card:

[   35.280024] usb 2-1: new high speed USB device using ehci_hcd and
address 4
[   35.435978] usb 2-1: configuration #1 chosen from 1 choice
[   35.450176] af9015: tuner id:179 not supported, please report!
[   35.452891] Afatech DVB-T 2: Fixing fullspeed to highspeed interval:
10 -> 7
[   35.453097] input: Afatech DVB-T 2
as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.1/input/input8
[   35.453141] generic-usb 0003:15A4:9016.0005: input,hidraw3: USB HID

v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:13.2-1/input1

lsusb shows:
Bus 002 Device 005: ID 15a4:9016

and finally lsmod | grep dvb

dvb_usb_af9015         37152  0 
dvb_usb                22892  1 dvb_usb_af9015
dvb_core              109716  1 dvb_usb

While googling for an answer to my troubles I came across
http://ubuntuforums.org/showthread.php?t=606487&page=5 which hints that the card may use the TDA18218HK tuner chip which does not seem to be supported currently.

Quoted 8 lines

Does anyone have any experience regarding this chip and know what to do to get it working.

Best regards,

//Jan

Hi Jan,

As stated in the Ubuntuforums thread, there doesn't seem to be any support for this chip at the moment. I don't know how hard it is to code support for a specific tuner, but I'm looking into that right now.

Hopefully some more experienced coders will join in writing something usable, as I don't think I will be able to do it myself.

Please drop a message if anyone finds something useful.

Best regards,

Bert

#2 lore raw
Quoted 48 lines · Bert Massop
Quoted 31 lines · Jan Sundman <jan.sundman <at> aland.net> writes:

Hi,

I just received a usb DVB-T card and have been trying to get it to work under Ubuntu 9.10, but to no avail. dmesg shows the following when plugging in the card:

[   35.280024] usb 2-1: new high speed USB device using ehci_hcd and address 4
[   35.435978] usb 2-1: configuration #1 chosen from 1 choice [   35.450176] af9015: tuner id:179 not supported, please report! [   35.452891] Afatech DVB-T 2: Fixing fullspeed to highspeed interval:
10 -> 7
[   35.453097] input: Afatech DVB-T 2
as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.1/input/input8 [   35.453141] generic-usb 0003:15A4:9016.0005: input,hidraw3: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:13.2-1/input1

lsusb shows:
Bus 002 Device 005: ID 15a4:9016

and finally lsmod | grep dvb
dvb_usb_af9015         37152  0
dvb_usb                22892  1 dvb_usb_af9015
dvb_core              109716  1 dvb_usb

While googling for an answer to my troubles I came across
http://ubuntuforums.org/showthread.php?t=606487&page=5 which hints that the card may use the TDA18218HK tuner chip which does not seem to be supported currently.

Quoted 8 lines

Does anyone have any experience regarding this chip and know what to do to get it working.

Best regards,

//Jan

Hi Jan,

As stated in the Ubuntuforums thread, there doesn't seem to be any support for this chip at the moment. I don't know how hard it is to code support for a specific tuner, but I'm looking into that right now.

Quoted 8 lines

Hopefully some more experienced coders will join in writing something usable, as I don't think I will be able to do it myself.

Please drop a message if anyone finds something useful.

Best regards,

Bert

The TDA18218 is not currently supported under Linux. I have the information needed to write a driver to support it, but I do not have any devices that use it, nor any interest (as of now) to write the driver on my own time.

For me, it would not be very difficult to get this done, as I have done work to support a similar family of tuners -- TDA18271 / TDA18211. The TDA18218 tuner is not supported by the current driver.

In the past, I would have gone ahead and written a driver for the sheer enjoyment of doing so... but nowadays, I actually have other projects of a higher priority that need my attention instead.

If, in the future, any commercial entity has interest in seeing this tuner silicon supported under Linux, they should contact me -- perhaps my desire to write this driver can be increased ;-)

Regards,

Mike Krufky
kernellabs.com

#3 lore raw

Hi Bert and Mike,

The information that you have regarding the TDA18218, where can I get my hands on that? It would be interesting to take a shot at writing the driver, but I guess I would need some pointers in the right direction.

Would it be possible to get the information from you, or is such information freely available on the internet? Where should I start looking?

Best regards,

//Jan

Quoted 83 lines · Michael Krufky
Quoted 48 lines · Bert Massop
Quoted 31 lines · Jan Sundman <jan.sundman <at> aland.net> writes:

Hi,

I just received a usb DVB-T card and have been trying to get it to work under Ubuntu 9.10, but to no avail. dmesg shows the following when plugging in the card:

[   35.280024] usb 2-1: new high speed USB device using ehci_hcd and
address 4
[   35.435978] usb 2-1: configuration #1 chosen from 1 choice
[   35.450176] af9015: tuner id:179 not supported, please report!
[   35.452891] Afatech DVB-T 2: Fixing fullspeed to highspeed interval:
10 -> 7
[   35.453097] input: Afatech DVB-T 2
as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.1/input/input8
[   35.453141] generic-usb 0003:15A4:9016.0005: input,hidraw3: USB HID

v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:13.2-1/input1

lsusb shows:
Bus 002 Device 005: ID 15a4:9016

and finally lsmod | grep dvb

dvb_usb_af9015         37152  0
dvb_usb                22892  1 dvb_usb_af9015
dvb_core              109716  1 dvb_usb

While googling for an answer to my troubles I came across
http://ubuntuforums.org/showthread.php?t=606487&page=5 which hints that the card may use the TDA18218HK tuner chip which does not seem to be supported currently.

Quoted 8 lines

Does anyone have any experience regarding this chip and know what to do to get it working.

Best regards,

//Jan

Hi Jan,

As stated in the Ubuntuforums thread, there doesn't seem to be any support for this chip at the moment. I don't know how hard it is to code support for a specific tuner, but I'm looking into that right now.

Quoted 8 lines

Hopefully some more experienced coders will join in writing something usable, as I don't think I will be able to do it myself.

Please drop a message if anyone finds something useful.

Best regards,

Bert

The TDA18218 is not currently supported under Linux. I have the information needed to write a driver to support it, but I do not have any devices that use it, nor any interest (as of now) to write the driver on my own time.

For me, it would not be very difficult to get this done, as I have done work to support a similar family of tuners -- TDA18271 / TDA18211. The TDA18218 tuner is not supported by the current driver.

In the past, I would have gone ahead and written a driver for the sheer enjoyment of doing so... but nowadays, I actually have other projects of a higher priority that need my attention instead.

If, in the future, any commercial entity has interest in seeing this tuner silicon supported under Linux, they should contact me -- perhaps my desire to write this driver can be increased ;-)

Regards,

Mike Krufky
kernellabs.com
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#4 lore raw

Hi Jan,

The datasheet for the TDA18218 can be obtained from NXP:
http://www.nxp.com/documents/data_sheet/TDA18218HN.pdf

That's all the information I have at the moment, maybe Mike has some other information (like the Application Note mentioned in the datasheet, that claims to contain information on writing drivers, but cannot be found anywhere).

Best regards,

Bert

Quoted 105 lines · Jan Sundman

Hi Bert and Mike,

The information that you have regarding the TDA18218, where can I get my hands on that? It would be interesting to take a shot at writing the driver, but I guess I would need some pointers in the right direction.

Would it be possible to get the information from you, or is such information freely available on the internet? Where should I start looking?

Best regards,

//Jan

Quoted 75 lines · Michael Krufky
Quoted 48 lines · Bert Massop
Quoted 31 lines · Jan Sundman <jan.sundman <at> aland.net> writes:

Hi,

I just received a usb DVB-T card and have been trying to get it to work under Ubuntu 9.10, but to no avail. dmesg shows the following when plugging in the card:

[   35.280024] usb 2-1: new high speed USB device using ehci_hcd and address 4
[   35.435978] usb 2-1: configuration #1 chosen from 1 choice [   35.450176] af9015: tuner id:179 not supported, please report! [   35.452891] Afatech DVB-T 2: Fixing fullspeed to highspeed interval:
10 -> 7
[   35.453097] input: Afatech DVB-T 2
as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.1/input/input8 [   35.453141] generic-usb 0003:15A4:9016.0005: input,hidraw3: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:13.2-1/input1

lsusb shows:
Bus 002 Device 005: ID 15a4:9016

and finally lsmod | grep dvb
dvb_usb_af9015         37152  0
dvb_usb                22892  1 dvb_usb_af9015
dvb_core              109716  1 dvb_usb

While googling for an answer to my troubles I came across
http://ubuntuforums.org/showthread.php?t=606487&page=5 which hints that the card may use the TDA18218HK tuner chip which does not seem to be supported currently.

Quoted 8 lines

Does anyone have any experience regarding this chip and know what to do to get it working.

Best regards,

//Jan

Hi Jan,

As stated in the Ubuntuforums thread, there doesn't seem to be any support for this chip at the moment. I don't know how hard it is to code support for a specific tuner, but I'm looking into that right now.

Quoted 8 lines

Hopefully some more experienced coders will join in writing something usable, as I don't think I will be able to do it myself.

Please drop a message if anyone finds something useful.

Best regards,

Bert

The TDA18218 is not currently supported under Linux.  I have the information needed to write a driver to support it, but I do not have any devices that use it, nor any interest (as of now) to write the driver on my own time.

For me, it would not be very difficult to get this done, as I have done work to support a similar family of tuners -- TDA18271 / TDA18211.  The TDA18218 tuner is not supported by the current driver.

In the past, I would have gone ahead and written a driver for the sheer enjoyment of doing so... but nowadays, I actually have other projects of a higher priority that need my attention instead.

If, in the future, any commercial entity has interest in seeing this tuner silicon supported under Linux, they should contact me -- perhaps my desire to write this driver can be increased ;-)

Quoted 8 lines

Regards,

Mike Krufky
kernellabs.com
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

#5 lore raw
Quoted 5 lines · Bert Massop

Hi Jan,

The datasheet for the TDA18218 can be obtained from NXP:
http://www.nxp.com/documents/data_sheet/TDA18218HN.pdf

Quoted 8 lines

That's all the information I have at the moment, maybe Mike has some other information (like the Application Note mentioned in the datasheet, that claims to contain information on writing drivers, but cannot be found anywhere).

Best regards,

Bert

Took a quick look at that datasheet. I would guess between that datasheet and a usbsnoop, there is probably enough there to write a driver that basically works for your particular hardware if you know what you are doing. The register map is abbreviated, but probably good enough...

Devin

Signature · 2 lines
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
#6 lore raw
Quoted 15 lines · Devin Heitmueller
Quoted 5 lines · Bert Massop

Hi Jan,

The datasheet for the TDA18218 can be obtained from NXP:
http://www.nxp.com/documents/data_sheet/TDA18218HN.pdf

Quoted 8 lines

That's all the information I have at the moment, maybe Mike has some other information (like the Application Note mentioned in the datasheet, that claims to contain information on writing drivers, but cannot be found anywhere).

Best regards,

Bert

Quoted 7 lines

Took a quick look at that datasheet.  I would guess between that datasheet and a usbsnoop, there is probably enough there to write a driver that basically works for your particular hardware if you know what you are doing.  The register map is abbreviated, but probably good enough...

Devin

The datasheet is missing too much important information needed to write a fully featured driver for the part, and I wouldn't recommend using a usbsnoop for this type of tuner, but be my guest and prove me wrong.

You might be able to get it working, but you'll end up with tons of binary blobs hardcoded for each frequency, unless you use a programming guide. Unfortunately, I don't have one that I can share :-/

I think you would be much better off purchasing supported hardware, instead.

Good luck, though...

-Mike

#7 lore raw

Hi,

Thanks for the info, I will have a look and see if it is worth the trouble.

Br,

// Jan

Quoted 44 lines · Michael Krufky
Quoted 15 lines · Devin Heitmueller
Quoted 5 lines · Bert Massop

Hi Jan,

The datasheet for the TDA18218 can be obtained from NXP:
http://www.nxp.com/documents/data_sheet/TDA18218HN.pdf

Quoted 8 lines

That's all the information I have at the moment, maybe Mike has some other information (like the Application Note mentioned in the datasheet, that claims to contain information on writing drivers, but cannot be found anywhere).

Best regards,

Bert

Quoted 7 lines

Took a quick look at that datasheet. I would guess between that datasheet and a usbsnoop, there is probably enough there to write a driver that basically works for your particular hardware if you know what you are doing. The register map is abbreviated, but probably good enough...

Devin

The datasheet is missing too much important information needed to write a fully featured driver for the part, and I wouldn't recommend using a usbsnoop for this type of tuner, but be my guest and prove me wrong.

You might be able to get it working, but you'll end up with tons of binary blobs hardcoded for each frequency, unless you use a programming guide. Unfortunately, I don't have one that I can share :-/

I think you would be much better off purchasing supported hardware, instead.

Good luck, though...

-Mike
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#8 lore raw

Hi all,

Using some usb replay tools used for making the pvrusb2 work, I am able to receive a working MPEG-TS stream, after snooping communication in Windows. It's an ugly way to make things work, but now I'm able to watch television in VLC. It's limited to 758MHz @ 8000KHz, thought, because I only ran an usbsnoop for that specific frequency.

So right now I'm able to write the TS stream into a pipe / stdout / file, but creating a (fixed frequency) driver for v4l is way too complicated for me, at the moment. I don't really understand how the v4l dvb drivers work, probably because I'm not really experienced in doing so ;-) Currently, I'm trying to understand how frequency selection works with this chip, and I'll be making a standalone application to save the TS stream. Then, maybe someone else can write a proper v4l driver for this chip.

Regards,
Bert

Quoted 61 lines · Jan Sundman

Hi,

Thanks for the info, I will have a look and see if it is worth the trouble.

Br,

// Jan

Quoted 37 lines · Michael Krufky
Quoted 15 lines · Devin Heitmueller
Quoted 5 lines · Bert Massop

Hi Jan,

The datasheet for the TDA18218 can be obtained from NXP:
http://www.nxp.com/documents/data_sheet/TDA18218HN.pdf

Quoted 8 lines

That's all the information I have at the moment, maybe Mike has some other information (like the Application Note mentioned in the datasheet, that claims to contain information on writing drivers, but cannot be found anywhere).

Best regards,

Bert

Quoted 7 lines

Took a quick look at that datasheet.  I would guess between that datasheet and a usbsnoop, there is probably enough there to write a driver that basically works for your particular hardware if you know what you are doing.  The register map is abbreviated, but probably good enough...

Devin

The datasheet is missing too much important information needed to write a fully featured driver for the part, and I wouldn't recommend using a usbsnoop for this type of tuner, but be my guest and prove me wrong.

You might be able to get it working, but you'll end up with tons of binary blobs hardcoded for each frequency, unless you use a programming guide.  Unfortunately, I don't have one that I can share :-/

I think you would be much better off purchasing supported hardware, instead.

Quoted 7 lines

Good luck, though...

-Mike
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html