Adding support for Mac OS X ppc64 host
Hello,
This mini series adds TCG target support for OSX/ppc64 and fixes the Cocoa frontend for ppc64.
With these patches applied, qemu and qemu-system-x86_64 are usable. Tested on Mac OS X v10.5 with a Haiku disk image and a Fedora 12 installation disk.
qemu-system-sparc works fine, too.
qemu-system-sparc64 works on ppc64 while it didn't on ppc! qemu-system-ppc appears to hang on ppc64 but doesn't on ppc.
I suggest we start applying these patches and try to fix these weird issues afterwards.
Regards,
Andreas
PATCH 1/3 TCG: Mac OS X support for ppc64 target
Darwin/ppc64 does not use function descriptors, adapt prologue and tcg_out_call accordingly. GPR2 is available for general use, so let's use it.
--- tcg/ppc64/tcg-target.c | 30 ++++++++++++++++++++++++++++++ 1 files changed, 30 insertions(+), 0 deletions(-)
tcg/ppc64/tcg-target.c +30 -0
@@ -104,6 +104,9 @@ static const int tcg_target_reg_alloc_order[] = {TCG_REG_R29 ,TCG_REG_R30 ,TCG_REG_R31 , +#ifdef __APPLE__ +TCG_REG_R2 , +#endifTCG_REG_R3 ,TCG_REG_R4 , TCG_REG_R5,
@@ -112,7 +115,9 @@ static const int tcg_target_reg_alloc_order[] = {TCG_REG_R8 ,TCG_REG_R9 ,TCG_REG_R10 , +#ifndef __APPLE__TCG_REG_R11 , +#endifTCG_REG_R12 ,TCG_REG_R24 , TCG_REG_R25,
@@ -136,6 +141,10 @@ static const int tcg_target_call_oarg_regs[2] = { };static const int tcg_target_callee_save_regs[] = { +#ifdef __APPLE__ +TCG_REG_R11 , +TCG_REG_R13 , +#endifTCG_REG_R14 ,TCG_REG_R15 ,TCG_REG_R16 ,
@@ -477,8 +486,21 @@ static void tcg_out_movi (TCGContext *s, TCGType type, } } +#ifdef __APPLE__ +static void tcg_out_b (TCGContext *s,int mask,tcg_target_long target); +#endif +static void tcg_out_call (TCGContext *s,tcg_target_long arg,int const_arg) { +#ifdef __APPLE__ +if (const_arg) { +tcg_out_b (s,LK , arg); + } +else { +tcg_out32 (s,MTSPR |RS (arg) |LR ); +tcg_out32 (s,BCLR |BO_ALWAYS |LK ); + } +#else int reg;if (const_arg) {
@@ -492,6 +514,7 @@ static void tcg_out_call (TCGContext *s, tcg_target_long arg, int const_arg)tcg_out32 (s,LD |RT (11 ) |RA (reg) |16 );tcg_out32 (s,LD |RT (2 ) |RA (reg) |8 );tcg_out32 (s,BCCTR |BO_ALWAYS |LK ); +#endif } static void tcg_out_ldst (TCGContext *s, int ret, int addr,
@@ -859,10 +882,12 @@ void tcg_target_qemu_prologue (TCGContext *s) ; frame_size = (frame_size +15 ) & ~15 ; +#ifndef __APPLE__/* First emit adhoc function descriptor */ addr = (uint64_t ) s->code_ptr +24 ;tcg_out32 (s, addr >>32 );tcg_out32 (s, addr);/* entry point */ s->code_ptr +=16 ;/* skip TOC and environment pointer */ +#endif /* Prologue */ tcg_out32 (s,MFSPR |RT (0 ) |LR );
@@ -1516,6 +1541,9 @@ void tcg_target_init (TCGContext *s)tcg_regset_set32 (tcg_target_available_regs[TCG_TYPE_I64 ],0 ,0xffffffff ); tcg_regset_set32 (tcg_target_call_clobber_regs, 0, (1 << TCG_REG_R0) | +#ifdef __APPLE__ + (1 << TCG_REG_R2) | +#endif (1 << TCG_REG_R3) | (1 << TCG_REG_R4) | (1 << TCG_REG_R5) |
@@ -1531,7 +1559,9 @@ void tcg_target_init (TCGContext *s)tcg_regset_clear (s->reserved_regs);tcg_regset_set_reg (s->reserved_regs,TCG_REG_R0 );tcg_regset_set_reg (s->reserved_regs,TCG_REG_R1 ); +#ifndef __APPLE__tcg_regset_set_reg (s->reserved_regs,TCG_REG_R2 ); +#endif tcg_regset_set_reg (s->reserved_regs,TCG_REG_R13 );#ifdef CONFIG_USE_GUEST_BASE
Signature · 1 line
1.6.5.3
PATCH 2/3 Cocoa: ppc64 host support
Fix integer usage in the Cocoa backend: NSInteger is long on LP64.
This makes the graphical display show up on a ppc64 host.
--- cocoa.m | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
cocoa.m +1 -1
@@ -337,7 +337,7 @@ int cocoa_keycode_to_qemu(int keycode) } else { // selective drawing code (draws only dirty rectangles) (OS X >= 10.4) const NSRect *rectList; - int rectCount; + NSInteger rectCount; int i; CGImageRef clipImageRef; CGRect clipRect;
Signature · 1 line
1.6.5.3
PATCH 3/3 Cocoa: Silence warnings
Missing static for cocoa_keycode_to_qemu.
Missing const for character constant.
__LITTLE_ENDIAN__ is undefined on Big Endian host.
--- cocoa.m | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)
cocoa.m +3 -3
@@ -229,7 +229,7 @@ int keymap[] = */ }; -int cocoa_keycode_to_qemu(int keycode) +static int cocoa_keycode_to_qemu(int keycode) { if((sizeof(keymap)/sizeof(int)) <= keycode) {
@@ -315,7 +315,7 @@ int cocoa_keycode_to_qemu(int keycode) screen.bitsPerComponent, //bitsPerComponent screen.bitsPerPixel, //bitsPerPixel (screen.width * (screen.bitsPerComponent/2)), //bytesPerRow -#if __LITTLE_ENDIAN__ +#ifdef __LITTLE_ENDIAN__ CGColorSpaceCreateWithName(kCGColorSpaceGenericRGB), //colorspace for OS X >= 10.4 kCGBitmapByteOrder32Little | kCGImageAlphaNoneSkipFirst, #else
@@ -783,7 +783,7 @@ int cocoa_keycode_to_qemu(int keycode) if(returnCode == NSCancelButton) { exit(0); } else if(returnCode == NSOKButton) { - char *bin = "qemu"; + const char *bin = "qemu"; char *img = (char*)[ [ sheet filename ] cStringUsingEncoding:NSASCIIStringEncoding]; char **argv = (char**)malloc( sizeof(char*)*3 );
Signature · 1 line
1.6.5.3
[Qemu-devel] Re: [PATCH 1/3] TCG: Mac OS X support for ppc64 target
In reply to Andreas FaerberQuoted 37 lines · Andreas Faerber
Darwin/ppc64 does not use function descriptors, adapt prologue and
tcg_out_callaccordingly. GPR2 is available for general use, so let's use it.Signed-off-by Andreas Faerber <[email protected]>Cc malc <[email protected]>--- tcg/ppc64/tcg-target.c | 30 ++++++++++++++++++++++++++++++ 1 files changed, 30 insertions(+), 0 deletions(-)tcg/ppc64/tcg-target.c +5
-0@@ -104,6 +104,9 @@ static const int tcg_target_reg_alloc_order[] = {TCG_REG_R29 ,TCG_REG_R30 ,TCG_REG_R31 , +#ifdef __APPLE__ +TCG_REG_R2 , +#endifTCG_REG_R3 ,TCG_REG_R4 , TCG_REG_R5,@@ -112,7 +115,9 @@ static const int tcg_target_reg_alloc_order[] = {TCG_REG_R8 ,TCG_REG_R9 ,TCG_REG_R10 , +#ifndef __APPLE__TCG_REG_R11 , +#endifTCG_REG_R12 ,TCG_REG_R24 , TCG_REG_R25,
tcg/ppc64/tcg-target.c static const int tcg_target_call_oarg_regs[2] = { · line 147
Quoted 7 lines
tcg/ppc64/tcg-target.c +4
-0@@ -136,6 +141,10 @@ static const int tcg_target_call_oarg_regs[2] = { };static const int tcg_target_callee_save_regs[] = { +#ifdef __APPLE__ +TCG_REG_R11 , +TCG_REG_R13 , +#endif
No need to add R13, it's reserved anyhow.
Quoted 36 lines
tcg/ppc64/tcg-target.c +14
-0TCG_REG_R14 ,TCG_REG_R15 , TCG_REG_R16,@@ -477,8 +486,21 @@ static void tcg_out_movi (TCGContext *s, TCGType type, } } +#ifdef __APPLE__ +static void tcg_out_b (TCGContext *s,int mask,tcg_target_long target); +#endif +static void tcg_out_call (TCGContext *s,tcg_target_long arg,int const_arg) { +#ifdef __APPLE__ +if (const_arg) { +tcg_out_b (s,LK , arg); + } +else { +tcg_out32 (s,MTSPR |RS (arg) |LR ); +tcg_out32 (s,BCLR |BO_ALWAYS |LK ); + } +#else int reg;if (const_arg) {@@ -492,6 +514,7 @@ static void tcg_out_call (TCGContext *s, tcg_target_long arg, int const_arg)tcg_out32 (s,LD |RT (11 ) |RA (reg) |16 );tcg_out32 (s,LD |RT (2 ) |RA (reg) |8 );tcg_out32 (s,BCCTR |BO_ALWAYS |LK ); +#endif } static void tcg_out_ldst (TCGContext *s, int ret, int addr,@@ -859,10 +882,12 @@ void tcg_target_qemu_prologue (TCGContext *s) ; frame_size = (frame_size +15 ) & ~15 ;
tcg/ppc64/tcg-target.c void tcg_target_qemu_prologue (TCGContext *s) · line 893
Quoted 10 lines
tcg/ppc64/tcg-target.c +2
-0+#ifndef __APPLE__/* First emit adhoc function descriptor */ addr = (uint64_t ) s->code_ptr +24 ;tcg_out32 (s, addr >>32 );tcg_out32 (s, addr);/* entry point */ s->code_ptr +=16 ;/* skip TOC and environment pointer */ +#endif /* Prologue */ tcg_out32 (s,MFSPR |RT (0 ) |LR );
The frame format is different to that of PPC-elf64abi, shouldn't really make a difference here, then again i don't have access to PPC64 Mac OSX, so can't really verify that.
Quoted 12 lines
tcg/ppc64/tcg-target.c +3
-0@@ -1516,6 +1541,9 @@ void tcg_target_init (TCGContext *s)tcg_regset_set32 (tcg_target_available_regs[TCG_TYPE_I64 ],0 ,0xffffffff ); tcg_regset_set32 (tcg_target_call_clobber_regs, 0, (1 << TCG_REG_R0) | +#ifdef __APPLE__ + (1 << TCG_REG_R2) | +#endif (1 << TCG_REG_R3) | (1 << TCG_REG_R4) | (1 << TCG_REG_R5) |
tcg/ppc64/tcg-target.c void tcg_target_init (TCGContext *s) · line 1567
Quoted 9 lines
tcg/ppc64/tcg-target.c +2
-0@@ -1531,7 +1559,9 @@ void tcg_target_init (TCGContext *s)tcg_regset_clear (s->reserved_regs);tcg_regset_set_reg (s->reserved_regs,TCG_REG_R0 );tcg_regset_set_reg (s->reserved_regs,TCG_REG_R1 ); +#ifndef __APPLE__tcg_regset_set_reg (s->reserved_regs,TCG_REG_R2 ); +#endif tcg_regset_set_reg (s->reserved_regs,TCG_REG_R13 );#ifdef CONFIG_USE_GUEST_BASE
Otherwise looks good.. Should i commit it with R13 fixed?
Signature · 1 line
mailto:[email protected]
[Qemu-devel] Re: [PATCH 1/3] TCG: Mac OS X support for ppc64 target
Am 06.12.2009 um 06:13 schrieb malc:
Quoted 31 lines · Andreas Faerber
Quoted 30 lines
Darwin/ppc64 does not use function descriptors, adapt prologue and
tcg_out_callaccordingly. GPR2 is available for general use, so let's use it.Signed-off-by Andreas Faerber <[email protected]>Cc malc <[email protected]>---
tcg/ppc64/tcg-target.c| 30 ++++++++++++++++++++++++++++++1 files changed, 30 insertions(+), 0 deletions(-)tcg/ppc64/tcg-target.c +2
-0@@ -859,10 +882,12 @@ void tcg_target_qemu_prologue (TCGContext *s) ; frame_size = (frame_size +15 ) & ~15 ; +#ifndef __APPLE__/* First emit adhoc function descriptor */ addr = (uint64_t ) s->code_ptr +24 ;tcg_out32 (s, addr >>32 );tcg_out32 (s, addr);/* entry point */ s->code_ptr +=16 ;/* skip TOC and environment pointer */ +#endif
Quoted 6 lines
Quoted 2 lines
tcg/ppc64/tcg-target.c +0
-0/* Prologue */ tcg_out32 (s, MFSPR | RT (0) | LR);The frame format is different to that of PPC-elf64abi, shouldn't really make a difference here, then again i don't have access to PPC64 Mac OSX, so can't really verify that.
I checked that the linkage area is 48, too, the LR offset is 16, too. The parameter area was depicted as 64 < 128.
So I guess we're good there.
Quoted 1 line
Otherwise looks good.. Should i commit it with R13 fixed?
About the callee-save stuff I was less certain. Feel free to make modifications (e.g., moving tcg_out_call up?) or have me resubmit.
Thanks,
Andreas
[Qemu-devel] Re: [PATCH 1/3] TCG: Mac OS X support for ppc64 target
Quoted 40 lines · Andreas F?rber
Am 06.12.2009 um 06:13 schrieb malc:
Quoted 30 lines · Andreas Faerber
Quoted 29 lines
Darwin/ppc64 does not use function descriptors, adapt prologue and
tcg_out_callaccordingly. GPR2 is available for general use, so let's use it.Signed-off-by Andreas Faerber <[email protected]>Cc malc <[email protected]>---
tcg/ppc64/tcg-target.c| 30 ++++++++++++++++++++++++++++++1 files changed, 30 insertions(+), 0 deletions(-)tcg/ppc64/tcg-target.c +2
-0@@ -859,10 +882,12 @@ void tcg_target_qemu_prologue (TCGContext *s) ; frame_size = (frame_size +15 ) & ~15 ; +#ifndef __APPLE__/* First emit adhoc function descriptor */ addr = (uint64_t ) s->code_ptr +24 ;tcg_out32 (s, addr >>32 );tcg_out32 (s, addr);/* entry point */ s->code_ptr +=16 ;/* skip TOC and environment pointer */ +#endif Quoted 6 lines
tcg/ppc64/tcg-target.c void tcg_target_qemu_prologue (TCGContext *s) · line 893
Quoted 2 lines
tcg/ppc64/tcg-target.c +0
-0/* Prologue */ tcg_out32 (s,MFSPR |RT (0 ) |LR );The frame format is different to that of PPC-elf64abi, shouldn't really make a difference here, then again i don't have access to PPC64 Mac OSX, so can't really verify that.
Quoted 8 lines
I checked that the linkage area is 48, too, the LR offset is 16, too. The parameter area was depicted as 64 < 128.
So I guess we're good there.Quoted 1 line
Otherwise looks good.. Should i commit it with R13 fixed?
About the callee-save stuff I was less certain. Feel free to make modifications (e.g., moving
tcg_out_callup?) or have me resubmit.
Sorry, i don't get this part, i was just thinking of removing R13 from the list. Moving tcg_out_call?
Signature · 1 line
mailto:[email protected]
PATCH v2 1/3 TCG: Mac OS X support for ppc64 target
Darwin/ppc64 does not use function descriptors, adapt prologue and tcg_out_call accordingly. GPR2 is available for general use, so let's use it.
v2:
- Don't mark reserved GPR13 as callee-save.
- Move tcg_out_b up.
- Fix unused variable warning in prologue.
--- tcg/ppc64/tcg-target.c | 55 +++++++++++++++++++++++++++++++++++------------ 1 files changed, 41 insertions(+), 14 deletions(-)
tcg/ppc64/tcg-target.c +41 -14
@@ -104,6 +104,9 @@ static const int tcg_target_reg_alloc_order[] = {TCG_REG_R29 ,TCG_REG_R30 ,TCG_REG_R31 , +#ifdef __APPLE__ +TCG_REG_R2 , +#endifTCG_REG_R3 ,TCG_REG_R4 , TCG_REG_R5,
@@ -112,7 +115,9 @@ static const int tcg_target_reg_alloc_order[] = {TCG_REG_R8 ,TCG_REG_R9 ,TCG_REG_R10 , +#ifndef __APPLE__TCG_REG_R11 , +#endifTCG_REG_R12 ,TCG_REG_R24 , TCG_REG_R25,
@@ -136,6 +141,9 @@ static const int tcg_target_call_oarg_regs[2] = { };static const int tcg_target_callee_save_regs[] = { +#ifdef __APPLE__ +TCG_REG_R11 , +#endifTCG_REG_R14 ,TCG_REG_R15 ,TCG_REG_R16 ,
@@ -477,8 +485,31 @@ static void tcg_out_movi (TCGContext *s, TCGType type, } } +static void tcg_out_b (TCGContext *s,int mask,tcg_target_long target) +{ +tcg_target_long disp; + + disp = target - (tcg_target_long ) s->code_ptr; +if ((disp <<38 ) >>38 == disp) +tcg_out32 (s,B | (disp &0x3fffffc ) | mask); +else { +tcg_out_movi (s,TCG_TYPE_I64 ,0 , (tcg_target_long ) target); +tcg_out32 (s,MTSPR |RS (0 ) |CTR ); +tcg_out32 (s,BCCTR |BO_ALWAYS | mask); + } +} +static void tcg_out_call (TCGContext *s,tcg_target_long arg,int const_arg) { +#ifdef __APPLE__ +if (const_arg) { +tcg_out_b (s,LK , arg); + } +else { +tcg_out32 (s,MTSPR |RS (arg) |LR ); +tcg_out32 (s,BCLR |BO_ALWAYS |LK ); + } +#else int reg;if (const_arg) {
@@ -492,6 +523,7 @@ static void tcg_out_call (TCGContext *s, tcg_target_long arg, int const_arg)tcg_out32 (s,LD |RT (11 ) |RA (reg) |16 );tcg_out32 (s,LD |RT (2 ) |RA (reg) |8 );tcg_out32 (s,BCCTR |BO_ALWAYS |LK ); +#endif } static void tcg_out_ldst (TCGContext *s, int ret, int addr,
@@ -516,20 +548,6 @@ static void tcg_out_ldsta (TCGContext *s, int ret, int addr, } } -static void tcg_out_b (TCGContext *s,int mask,tcg_target_long target) -{ -tcg_target_long disp; - - disp = target - (tcg_target_long ) s->code_ptr; -if ((disp <<38 ) >>38 == disp) -tcg_out32 (s,B | (disp &0x3fffffc ) | mask); -else { -tcg_out_movi (s,TCG_TYPE_I64 ,0 , (tcg_target_long ) target); -tcg_out32 (s,MTSPR |RS (0 ) |CTR ); -tcg_out32 (s,BCCTR |BO_ALWAYS | mask); - } -} -#if defined (CONFIG_SOFTMMU )#include "../../softmmu_defs.h"
@@ -845,7 +863,9 @@ static void tcg_out_qemu_st (TCGContext *s, const TCGArg *args, int opc)void tcg_target_qemu_prologue (TCGContext *s) {int i, frame_size; +#ifndef __APPLE__uint64_t addr; +#endif frame_size =0 +8 /* back chain */
@@ -859,10 +879,12 @@ void tcg_target_qemu_prologue (TCGContext *s) ; frame_size = (frame_size +15 ) & ~15 ; +#ifndef __APPLE__/* First emit adhoc function descriptor */ addr = (uint64_t ) s->code_ptr +24 ;tcg_out32 (s, addr >>32 );tcg_out32 (s, addr);/* entry point */ s->code_ptr +=16 ;/* skip TOC and environment pointer */ +#endif /* Prologue */ tcg_out32 (s,MFSPR |RT (0 ) |LR );
@@ -1516,6 +1538,9 @@ void tcg_target_init (TCGContext *s)tcg_regset_set32 (tcg_target_available_regs[TCG_TYPE_I64 ],0 ,0xffffffff ); tcg_regset_set32 (tcg_target_call_clobber_regs, 0, (1 << TCG_REG_R0) | +#ifdef __APPLE__ + (1 << TCG_REG_R2) | +#endif (1 << TCG_REG_R3) | (1 << TCG_REG_R4) | (1 << TCG_REG_R5) |
@@ -1531,7 +1556,9 @@ void tcg_target_init (TCGContext *s)tcg_regset_clear (s->reserved_regs);tcg_regset_set_reg (s->reserved_regs,TCG_REG_R0 );tcg_regset_set_reg (s->reserved_regs,TCG_REG_R1 ); +#ifndef __APPLE__tcg_regset_set_reg (s->reserved_regs,TCG_REG_R2 ); +#endif tcg_regset_set_reg (s->reserved_regs,TCG_REG_R13 );#ifdef CONFIG_USE_GUEST_BASE
Signature · 1 line
1.6.5.3
PATCH v2 2/3 Cocoa: ppc64 host support
Fix integer usage in the Cocoa backend: NSInteger is long on LP64.
This makes the graphical display show up on a ppc64 host.
--- cocoa.m | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
cocoa.m +1 -1
@@ -337,7 +337,7 @@ int cocoa_keycode_to_qemu(int keycode) } else { // selective drawing code (draws only dirty rectangles) (OS X >= 10.4) const NSRect *rectList; - int rectCount; + NSInteger rectCount; int i; CGImageRef clipImageRef; CGRect clipRect;
Signature · 1 line
1.6.5.3
PATCH v2 3/3 Cocoa: Silence warnings
Missing static for cocoa_keycode_to_qemu.
Missing const for character constant.
__LITTLE_ENDIAN__ is undefined on Big Endian host.
--- cocoa.m | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)
cocoa.m +3 -3
@@ -229,7 +229,7 @@ int keymap[] = */ }; -int cocoa_keycode_to_qemu(int keycode) +static int cocoa_keycode_to_qemu(int keycode) { if((sizeof(keymap)/sizeof(int)) <= keycode) {
@@ -315,7 +315,7 @@ int cocoa_keycode_to_qemu(int keycode) screen.bitsPerComponent, //bitsPerComponent screen.bitsPerPixel, //bitsPerPixel (screen.width * (screen.bitsPerComponent/2)), //bytesPerRow -#if __LITTLE_ENDIAN__ +#ifdef __LITTLE_ENDIAN__ CGColorSpaceCreateWithName(kCGColorSpaceGenericRGB), //colorspace for OS X >= 10.4 kCGBitmapByteOrder32Little | kCGImageAlphaNoneSkipFirst, #else
@@ -783,7 +783,7 @@ int cocoa_keycode_to_qemu(int keycode) if(returnCode == NSCancelButton) { exit(0); } else if(returnCode == NSOKButton) { - char *bin = "qemu"; + const char *bin = "qemu"; char *img = (char*)[ [ sheet filename ] cStringUsingEncoding:NSASCIIStringEncoding]; char **argv = (char**)malloc( sizeof(char*)*3 );
Signature · 1 line
1.6.5.3
[Qemu-devel] Re: [PATCH v2 2/3] Cocoa: ppc64 host support
In reply to Andreas FaerberQuoted 5 lines · Andreas Faerber
Fix integer usage in the Cocoa backend: NSInteger is long on LP64.
This makes the graphical display show up on a ppc64 host.
Interesting! Unfortunately I don't have a PPC64 Apple machine handy, so I can't test it.
Alex
[Qemu-devel] Re: [PATCH v2 2/3] Cocoa: ppc64 host support
Hi Alex,
Am 06.12.2009 um 14:02 schrieb Alexander Graf:
Quoted 10 lines · Andreas Faerber
Quoted 6 lines
Fix integer usage in the Cocoa backend: NSInteger is long on LP64.
This makes the graphical display show up on a ppc64 host.
Interesting! Unfortunately I don't have a PPC64 Apple machine handy, so I can't test it.
I cc'ed you so that you could check your earlier x86_64 Mac patch series, if you care. I don't have an x86_64 Mac at hands myself.
Btw I'll be looking into bringing the Cocoa frontend on par with SDL, namely closing the app when closing the window and not creating the window in -nographic mode. That's awful when debugging!
Andreas
[Qemu-devel] Re: [PATCH v2 2/3] Cocoa: ppc64 host support
Quoted 9 lines · Andreas Färber
Hi Alex,
Am 06.12.2009 um 14:02 schrieb Alexander Graf:
Quoted 5 lines · Andreas Faerber
Quoted 3 lines
Fix integer usage in the Cocoa backend: NSInteger is long on LP64.
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
This makes the graphical display show up on a ppc64 host.
Interesting! Unfortunately I don't have a PPC64 Apple machine handy, so I can't test it.
I cc'ed you so that you could check your earlier
x86_64Mac patch series, if you care. I don't have anx86_64Mac at hands myself.
Oh I see, I'll test it later today or tomorrow.
Quoted 1 line
Btw I'll be looking into bringing the Cocoa frontend on par with SDL, namely closing the app when closing the window and not creating the window in -nographic mode. That's awful when debugging!
I agree. I did a patch for that once - might be worth searching the ML for that. Basically it searched the args for a "-nographic" parameter. Pretty hacky, but at least it worked.
Alex
[Qemu-devel] Re: [PATCH v2 2/3] Cocoa: ppc64 host support
In reply to Andreas Faerbercocoa.m int cocoa_keycode_to_qemu(int keycode) · line 340
Quoted 2 lines · Andreas Faerber
cocoa.m +1
-1- int rectCount; + NSInteger rectCount;
I know that this is endorsed by apple since 10.5 but NSInteger will break compiling on Tiger and older. Int on the other hand is only throwing a warning on Leopard if I'm not mistaken.
Especially with qemu, one has to have an eye on the type... NSInteger can be an int or a long, depending on the host...
#if __LP64__ || NS_BUILD_32_LIKE_64 typedef long NSInteger; typedef unsigned long NSUInteger; #else typedef int NSInteger; typedef unsigned int NSUInteger;
#endif
I have no G5 at hand to test either.
Mike
[Qemu-devel] Re: [PATCH v2 2/3] Cocoa: ppc64 host support
Am 06.12.2009 um 14:41 schrieb Mike Kronenberg:
Quoted 6 lines · Andreas Faerber
cocoa.m int cocoa_keycode_to_qemu(int keycode) · line 340
Quoted 3 lines
cocoa.m +1
-1- int rectCount; + NSInteger rectCount;I know that this is endorsed by apple since 10.5 but NSInteger will break compiling on Tiger and older.
You appear to be right there... no trace of it in 10.4u SDK.
Quoted 1 line
Int on the other hand is only throwing a warning on Leopard if I'm not mistaken.
On Leopard ppc it just warns and works because NSInteger == int. On Leopard ppc64 it warns and fails at runtime because NSInteger != int.
Quoted 9 lines
Especially with qemu, one has to have an eye on the type... NSInteger can be an int or a long, depending on the host...
#if __LP64__ || NS_BUILD_32_LIKE_64 typedef long NSInteger; typedef unsigned long NSUInteger; #else typedef int NSInteger; typedef unsigned int NSUInteger;#endif
Right, so we do need NSInteger - I'll add a version check. Thanks for the feedback!
Andreas
PATCH v3 1/3 TCG: Mac OS X support for ppc64 target
Darwin/ppc64 does not use function descriptors, adapt prologue and tcg_out_call accordingly. GPR2 is available for general use, so let's use it.
v2:
- Don't mark reserved GPR13 as callee-save.
- Move tcg_out_b up.
- Fix unused variable warning in prologue.
--- tcg/ppc64/tcg-target.c | 55 +++++++++++++++++++++++++++++++++++------------ 1 files changed, 41 insertions(+), 14 deletions(-)
tcg/ppc64/tcg-target.c +41 -14
@@ -104,6 +104,9 @@ static const int tcg_target_reg_alloc_order[] = {TCG_REG_R29 ,TCG_REG_R30 ,TCG_REG_R31 , +#ifdef __APPLE__ +TCG_REG_R2 , +#endifTCG_REG_R3 ,TCG_REG_R4 , TCG_REG_R5,
@@ -112,7 +115,9 @@ static const int tcg_target_reg_alloc_order[] = {TCG_REG_R8 ,TCG_REG_R9 ,TCG_REG_R10 , +#ifndef __APPLE__TCG_REG_R11 , +#endifTCG_REG_R12 ,TCG_REG_R24 , TCG_REG_R25,
@@ -136,6 +141,9 @@ static const int tcg_target_call_oarg_regs[2] = { };static const int tcg_target_callee_save_regs[] = { +#ifdef __APPLE__ +TCG_REG_R11 , +#endifTCG_REG_R14 ,TCG_REG_R15 ,TCG_REG_R16 ,
@@ -477,8 +485,31 @@ static void tcg_out_movi (TCGContext *s, TCGType type, } } +static void tcg_out_b (TCGContext *s,int mask,tcg_target_long target) +{ +tcg_target_long disp; + + disp = target - (tcg_target_long ) s->code_ptr; +if ((disp <<38 ) >>38 == disp) +tcg_out32 (s,B | (disp &0x3fffffc ) | mask); +else { +tcg_out_movi (s,TCG_TYPE_I64 ,0 , (tcg_target_long ) target); +tcg_out32 (s,MTSPR |RS (0 ) |CTR ); +tcg_out32 (s,BCCTR |BO_ALWAYS | mask); + } +} +static void tcg_out_call (TCGContext *s,tcg_target_long arg,int const_arg) { +#ifdef __APPLE__ +if (const_arg) { +tcg_out_b (s,LK , arg); + } +else { +tcg_out32 (s,MTSPR |RS (arg) |LR ); +tcg_out32 (s,BCLR |BO_ALWAYS |LK ); + } +#else int reg;if (const_arg) {
@@ -492,6 +523,7 @@ static void tcg_out_call (TCGContext *s, tcg_target_long arg, int const_arg)tcg_out32 (s,LD |RT (11 ) |RA (reg) |16 );tcg_out32 (s,LD |RT (2 ) |RA (reg) |8 );tcg_out32 (s,BCCTR |BO_ALWAYS |LK ); +#endif } static void tcg_out_ldst (TCGContext *s, int ret, int addr,
@@ -516,20 +548,6 @@ static void tcg_out_ldsta (TCGContext *s, int ret, int addr, } } -static void tcg_out_b (TCGContext *s,int mask,tcg_target_long target) -{ -tcg_target_long disp; - - disp = target - (tcg_target_long ) s->code_ptr; -if ((disp <<38 ) >>38 == disp) -tcg_out32 (s,B | (disp &0x3fffffc ) | mask); -else { -tcg_out_movi (s,TCG_TYPE_I64 ,0 , (tcg_target_long ) target); -tcg_out32 (s,MTSPR |RS (0 ) |CTR ); -tcg_out32 (s,BCCTR |BO_ALWAYS | mask); - } -} -#if defined (CONFIG_SOFTMMU )#include "../../softmmu_defs.h"
@@ -845,7 +863,9 @@ static void tcg_out_qemu_st (TCGContext *s, const TCGArg *args, int opc)void tcg_target_qemu_prologue (TCGContext *s) {int i, frame_size; +#ifndef __APPLE__uint64_t addr; +#endif frame_size =0 +8 /* back chain */
@@ -859,10 +879,12 @@ void tcg_target_qemu_prologue (TCGContext *s) ; frame_size = (frame_size +15 ) & ~15 ; +#ifndef __APPLE__/* First emit adhoc function descriptor */ addr = (uint64_t ) s->code_ptr +24 ;tcg_out32 (s, addr >>32 );tcg_out32 (s, addr);/* entry point */ s->code_ptr +=16 ;/* skip TOC and environment pointer */ +#endif /* Prologue */ tcg_out32 (s,MFSPR |RT (0 ) |LR );
@@ -1516,6 +1538,9 @@ void tcg_target_init (TCGContext *s)tcg_regset_set32 (tcg_target_available_regs[TCG_TYPE_I64 ],0 ,0xffffffff ); tcg_regset_set32 (tcg_target_call_clobber_regs, 0, (1 << TCG_REG_R0) | +#ifdef __APPLE__ + (1 << TCG_REG_R2) | +#endif (1 << TCG_REG_R3) | (1 << TCG_REG_R4) | (1 << TCG_REG_R5) |
@@ -1531,7 +1556,9 @@ void tcg_target_init (TCGContext *s)tcg_regset_clear (s->reserved_regs);tcg_regset_set_reg (s->reserved_regs,TCG_REG_R0 );tcg_regset_set_reg (s->reserved_regs,TCG_REG_R1 ); +#ifndef __APPLE__tcg_regset_set_reg (s->reserved_regs,TCG_REG_R2 ); +#endif tcg_regset_set_reg (s->reserved_regs,TCG_REG_R13 );#ifdef CONFIG_USE_GUEST_BASE
Signature · 1 line
1.6.5.3
PATCH v3 2/3 Cocoa: ppc64 host support
Fix integer usage in the Cocoa backend: NSInteger is long on LP64.
This makes the graphical display show up on a ppc64 host.
v3:
- Confine NSInteger to Mac OS X v10.5 and later
--- cocoa.m | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-)
cocoa.m +8 -0
@@ -28,6 +28,10 @@ #include "console.h" #include "sysemu.h" +#ifndef MAC_OS_X_VERSION_10_5 +#define MAC_OS_X_VERSION_10_5 1050 +#endif + //#define DEBUG
@@ -337,7 +341,11 @@ int cocoa_keycode_to_qemu(int keycode) } else { // selective drawing code (draws only dirty rectangles) (OS X >= 10.4) const NSRect *rectList; +#if (MAC_OS_X_VERSION_MAX_ALLOWED >= MAC_OS_X_VERSION_10_5) + NSInteger rectCount; +#else int rectCount; +#endif int i; CGImageRef clipImageRef; CGRect clipRect;
Signature · 1 line
1.6.5.3
PATCH v3 3/3 Cocoa: Silence warnings
Missing static for cocoa_keycode_to_qemu.
Missing const for character constant.
__LITTLE_ENDIAN__ is undefined on Big Endian host. MAC_OS_X_VERSION_10_4 is undefined on v10.3 and earlier.
v3:
- Silence warnings reported from Mac OS X v10.3.9
--- cocoa.m | 9 ++++++--- 1 files changed, 6 insertions(+), 3 deletions(-)
cocoa.m +6 -3
@@ -28,6 +28,9 @@ #include "console.h" #include "sysemu.h" +#ifndef MAC_OS_X_VERSION_10_4 +#define MAC_OS_X_VERSION_10_4 1040 +#endif #ifndef MAC_OS_X_VERSION_10_5 #define MAC_OS_X_VERSION_10_5 1050 #endif
@@ -233,7 +236,7 @@ int keymap[] = */ }; -int cocoa_keycode_to_qemu(int keycode) +static int cocoa_keycode_to_qemu(int keycode) { if((sizeof(keymap)/sizeof(int)) <= keycode) {
@@ -319,7 +322,7 @@ int cocoa_keycode_to_qemu(int keycode) screen.bitsPerComponent, //bitsPerComponent screen.bitsPerPixel, //bitsPerPixel (screen.width * (screen.bitsPerComponent/2)), //bytesPerRow -#if __LITTLE_ENDIAN__ +#ifdef __LITTLE_ENDIAN__ CGColorSpaceCreateWithName(kCGColorSpaceGenericRGB), //colorspace for OS X >= 10.4 kCGBitmapByteOrder32Little | kCGImageAlphaNoneSkipFirst, #else
@@ -791,7 +794,7 @@ int cocoa_keycode_to_qemu(int keycode) if(returnCode == NSCancelButton) { exit(0); } else if(returnCode == NSOKButton) { - char *bin = "qemu"; + const char *bin = "qemu"; char *img = (char*)[ [ sheet filename ] cStringUsingEncoding:NSASCIIStringEncoding]; char **argv = (char**)malloc( sizeof(char*)*3 );
Signature · 1 line
1.6.5.3
[Qemu-devel] Re: [PATCH 1/3] TCG: Mac OS X support for ppc64 target
In reply to malcAm 06.12.2009 um 07:28 schrieb malc:
Quoted 26 lines · Andreas F?rber
Quoted 25 lines
Am 06.12.2009 um 06:13 schrieb malc:
Quoted 20 lines · Andreas Faerber
tcg/ppc64/tcg-target.c
Quoted 17 lines
Darwin/ppc64 does not use function descriptors, adapt prologue and
tcg_out_callaccordingly. GPR2 is available for general use, so let's use it.Signed-off-by Andreas Faerber <[email protected]>Cc malc <[email protected]>---
tcg/ppc64/tcg-target.c| 30 ++++++++++++++++++++++++++++++1 files changed, 30 insertions(+), 0 deletions(-)tcg/ppc64/tcg-target.c +0
-0Otherwise looks good.. Should i commit it with R13 fixed?
Quoted 5 lines
Quoted 2 lines
About the callee-save stuff I was less certain. Feel free to make modifications (e.g., moving
tcg_out_callup?) or have me resubmit.Sorry, i don't get this part, i was just thinking of removing R13 from the list. Moving
tcg_out_call?
Sorry, I meant tcg_out_b. Just declaring it was the least intrusive patch.
I've sent a v2 series, doing the above plus silencing a warning.
They are also available for pulling from git://repo.or.cz/qemu/afaerber.git, branch tcg-osx-ppc64.
Andreas
Quoted 5 lines · Andreas Faerber
Hello,
This mini series adds TCG target support for OSX/ppc64 and fixes the Cocoa frontend for ppc64.
Quoted 7 lines
With these patches applied, qemu and qemu-system-x86_64 are usable. Tested on Mac OS X v10.5 with a Haiku disk image and a Fedora 12 installation disk.
qemu-system-sparc works fine, too.
qemu-system-sparc64 works on ppc64 while it didn't on ppc!
Does it work on linux ppc64? If so how exactly did you test that (so that i can try to debug it here)
Quoted 1 line
qemu-system-ppc appears to hang on ppc64 but doesn't on ppc.
Ditto.
Quoted 9 lines
I suggest we start applying these patches and try to fix these weird issues afterwards.
Regards,
Andreas
Signature · 1 line
mailto:[email protected]
Am 06.12.2009 um 06:14 schrieb malc:
Quoted 5 lines · Andreas Faerber
Quoted 2 lines
qemu-system-sparc64 works on ppc64 while it didn't on ppc!
Does it work on linux ppc64? If so
Haven't had a chance to test on other ppc[64] platforms yet.
Quoted 2 lines
how exactly did you test that
(so that i can try to debug it here)
$ /Users/andreas/QEMU/latest64/bin/qemu-system-sparc64 -boot d -cdrom /Users/andreas/QEMU/sol-10-u3-ga-sparc-dvd.iso $ /Users/andreas/QEMU/latest64/bin/qemu-system-sparc64 -boot d -cdrom /Users/andreas/QEMU/debian-40r3-sparc-CD-1.iso
All these (also MilaX, in case you don't have Solaris 10 around) are expected to enter OpenBIOS and result in OpenBIOS errors but not in QEMU crashes or hangs. On Linux add -nographic.
Quoted 3 lines
Quoted 1 line
qemu-system-ppc appears to hang on ppc64 but doesn't on ppc.
Ditto.
$ /Users/andreas/QEMU/latest64/bin/qemu-system-ppc -boot d -cdrom /Users/andreas/QEMU/debian-40r4a-powerpc-netinst.iso
On OSX/ppc64 this never got past the OpenBIOS banner and eventually crashed:
Starting program: /Users/andreas/QEMU/latest64/bin/qemu-system-ppc -boot d -cdrom /Users/andreas/QEMU/debian-40r4a-powerpc-netinst.iso -nographic Reading symbols for shared libraries ++++++++++++++++............................................................. done Reading symbols for shared libraries . done
Reading symbols for shared libraries . done
Reading symbols for shared libraries . done
Reading symbols for shared libraries . done
Reading symbols for shared libraries .. done
Quoted 7 lines
Quoted 7 lines
=============================================================
OpenBIOS 1.0 [Sep 11 2009 06:53] Configuration device id QEMU version 1 machine id 2
CPUs: 1
Memory: 128M
UUID: 00000000-0000-0000-0000-000000000000 CPU type PowerPC,750
Welcome to OpenBIOS v1.0 built on Sep 11 2009 06:53
Program received signal EXC_BAD_ACCESS, Could not access memory.
Reason: KERN_PROTECTION_FAILURE at address: 0x0000000012c3cab0
0x0000000000157db4 in
ldl_be_p [inlined] () at cpu-all.h:544
544 return *(uint32_t *)ptr;The upper bt showed something like helper_lsw only, iirc.
This is at QEMU 749717a0ea2f60d33d01c1e37fa24dfa7250dfc0, using the binary blobs on OSX/ppc64 and with or without latest OpenBIOS versions on OSX/ppc.
Andreas
Quoted 19 lines · Andreas F?rber
Am 06.12.2009 um 06:14 schrieb malc:
Quoted 5 lines · Andreas Faerber
Quoted 2 lines
qemu-system-sparc64 works on ppc64 while it didn't on ppc!
Does it work on linux ppc64? If so
Haven't had a chance to test on other ppc[64] platforms yet.
Quoted 2 lines
how exactly did you test that
(so that i can try to debug it here)$ /Users/andreas/QEMU/latest64/bin/qemu-system-sparc64 -boot d -cdrom /Users/andreas/QEMU/sol-10-u3-ga-sparc-dvd.iso $ /Users/andreas/QEMU/latest64/bin/qemu-system-sparc64 -boot d -cdrom /Users/andreas/QEMU/debian-40r3-sparc-CD-1.iso
Quoted 5 lines
All these (also MilaX, in case you don't have Solaris 10 around) are expected to enter OpenBIOS and result in OpenBIOS errors but not in QEMU crashes or hangs.
On Linux add -nographic.
I was only able to find debian-40r3-sparc-netinst.iso here on ppc/linux it boots (i think):
<snip snip>
boot: expert
Allocated 8 Megs of memory at 0x40000000 for kernel
Loaded kernel version 2.6.18
Loading initial ramdisk (3882238 bytes at 0xC00000 phys, 0x40C00000 virt)... -
Remapping the kernel... done.
Booting Linux...
And it sits there while i'm losing patience..
Can you retry with netinst, if it behaves like CD-1 in your case the problem is most likely confined to OSX, otherwise i would have to search for CD-1 better.
Quoted 12 lines
Quoted 3 lines
Quoted 1 line
qemu-system-ppc appears to hang on ppc64 but doesn't on ppc.
Ditto.
$ /Users/andreas/QEMU/latest64/bin/qemu-system-ppc -boot d -cdrom /Users/andreas/QEMU/debian-40r4a-powerpc-netinst.isoOn OSX/ppc64 this never got past the OpenBIOS banner and eventually crashed:
Starting program: /Users/andreas/QEMU/latest64/bin/qemu-system-ppc -boot d -cdrom /Users/andreas/QEMU/debian-40r4a-powerpc-netinst.iso -nographic Reading symbols for shared libraries
[..snip..]
Quoted 5 lines
The upper bt showed something like
helper_lswonly, iirc.This is at QEMU
749717a0ea2f60d33d01c1e37fa24dfa7250dfc0, using the binary blobs on OSX/ppc64 and with or without latest OpenBIOS versions on OSX/ppc.
Thanks will try system-ppc later..
Signature · 1 line
mailto:[email protected]
Am 06.12.2009 um 07:37 schrieb malc:
Quoted 1 line
will try system-ppc later..
I've tried Debian 4.0r4a ppc netinst CD on Linux/ppc64 and spotted different but similar deviations:
ppc64 qemu-system-ppc segfaults after "returning from prom_init". ppc64 qemu-system-ppc64 boots the default "install" option fine.
amd64 qemu-system-ppc does not exhibit this crash. amd64 qemu-system-ppc64 boots okay, too.
Andreas
Quoted 9 lines · Andreas F?rber
Am 06.12.2009 um 07:37 schrieb malc:
Quoted 1 line
will try system-ppc later..
I've tried Debian 4.0r4a ppc netinst CD on Linux/ppc64 and spotted different but similar deviations:
ppc64 qemu-system-ppc segfaults after "returning from
prom_init".
Weird things going on there, it fails (but only semi-reliably!) inside helper_lsw it appears that while argument passed to it is correct the memory reference (inside ldl) uses sign extended version of the address.
I'm a bit stumped...
Quoted 6 lines
ppc64 qemu-system-ppc64 boots the default "install" option fine.
amd64 qemu-system-ppc does not exhibit this crash. amd64 qemu-system-ppc64 boots okay, too.
Andreas
Signature · 1 line
mailto:[email protected]
Quoted 9 lines · Andreas F?rber
Am 06.12.2009 um 07:37 schrieb malc:
Quoted 1 line
will try system-ppc later..
I've tried Debian 4.0r4a ppc netinst CD on Linux/ppc64 and spotted different but similar deviations:
ppc64 qemu-system-ppc segfaults after "returning from
prom_init".
Should be fixed by 591d6f1dfdb60ab0a4cc487cd5781fa799dcac4b, can you verify?
Quoted 6 lines
ppc64 qemu-system-ppc64 boots the default "install" option fine.
amd64 qemu-system-ppc does not exhibit this crash. amd64 qemu-system-ppc64 boots okay, too.
Andreas
Signature · 1 line
mailto:[email protected]
Am 15.12.2009 um 18:00 schrieb malc:
Quoted 9 lines · Andreas F?rber
Quoted 5 lines
I've tried Debian 4.0r4a ppc netinst CD on Linux/ppc64 and spotted [...] deviations:
ppc64 qemu-system-ppc segfaults after "returning from
prom_init".Should be fixed by
591d6f1dfdb60ab0a4cc487cd5781fa799dcac4b, can you verify?
ppc-softmmu no longer crashes on Linux/ppc64. Didn't notice any regression or improvement on OSX/ppc64 - no influence on x86/x64 Haiku or sparc64 Debian on Linux/ppc64.
Good catch, thanks!
Andreas
Am 06.12.2009 um 07:37 schrieb malc:
Quoted 39 lines · Andreas F?rber
Quoted 20 lines
Am 06.12.2009 um 06:14 schrieb malc:
Quoted 5 lines · Andreas Faerber
Quoted 2 lines
qemu-system-sparc64 works on ppc64 while it didn't on ppc!
Does it work on linux ppc64? If so
Haven't had a chance to test on other ppc[64] platforms yet.
Quoted 2 lines
how exactly did you test that
(so that i can try to debug it here)$ /Users/andreas/QEMU/latest64/bin/qemu-system-sparc64 -boot d -cdrom /Users/andreas/QEMU/sol-10-u3-ga-sparc-dvd.iso $ /Users/andreas/QEMU/latest64/bin/qemu-system-sparc64 -boot d -cdrom /Users/andreas/QEMU/debian-40r3-sparc-CD-1.isoQuoted 5 lines
All these (also MilaX, in case you don't have Solaris 10 around) are expected to enter OpenBIOS and result in OpenBIOS errors but not in QEMU crashes or hangs.
On Linux add -nographic.I was only able to find debian-40r3-sparc-netinst.iso here on ppc/linux it boots (i think):
<snip snip>
boot: expert
Allocated 8 Megs of memory at0x40000000for kernel
Loaded kernel version 2.6.18
Loading initial ramdisk (3882238 bytes at0xC00000phys,0x40C00000virt)... -
Remapping the kernel... done.
Booting Linux...
Quoted 5 lines
And it sits there while i'm losing patience..
Can you retry with netinst, if it behaves like CD-1 in your case the problem is most likely confined to OSX, otherwise i would have to search for CD-1 better.
I tried with 4.0r8 businesscard: Such a hang I could reproduce on Linux/ppc and Linux/ppc64 and OSX/ppc64 and Linux/amd64 only when running with qemu-system-sparc64, but not with qemu-system-sparc.
Also, on Linux/ppc64, qemu and qemu-system-x86_64 render Haiku nightly image r34558 x86gcc2 unusable (desktop garbled, no cursor), while on Linux/ppc and OSX/ppc64 (r34514) and Linux/amd64 it works okay.
Andreas
Quoted 45 lines · Andreas F?rber
Am 06.12.2009 um 07:37 schrieb malc:
Quoted 42 lines · Andreas F?rber
Quoted 20 lines
Am 06.12.2009 um 06:14 schrieb malc:
Quoted 5 lines · Andreas Faerber
Quoted 2 lines
qemu-system-sparc64 works on ppc64 while it didn't on ppc!
Does it work on linux ppc64? If so
Haven't had a chance to test on other ppc[64] platforms yet.
Quoted 2 lines
how exactly did you test that
(so that i can try to debug it here)$ /Users/andreas/QEMU/latest64/bin/qemu-system-sparc64 -boot d -cdrom /Users/andreas/QEMU/sol-10-u3-ga-sparc-dvd.iso $ /Users/andreas/QEMU/latest64/bin/qemu-system-sparc64 -boot d -cdrom /Users/andreas/QEMU/debian-40r3-sparc-CD-1.isoQuoted 6 lines
All these (also MilaX, in case you don't have Solaris 10 around) are expected
to enter OpenBIOS and result in OpenBIOS errors but not in QEMU crashes or hangs.
On Linux add -nographic.I was only able to find debian-40r3-sparc-netinst.iso here on ppc/linux it boots (i think):
<snip snip>
boot: expert
Allocated 8 Megs of memory at0x40000000for kernel
Loaded kernel version 2.6.18
Loading initial ramdisk (3882238 bytes at0xC00000phys,0x40C00000virt)... -
Remapping the kernel... done.
Booting Linux...And it sits there while i'm losing patience..
Quoted 7 lines
Quoted 3 lines
Can you retry with netinst, if it behaves like CD-1 in your case the problem is most likely confined to OSX, otherwise i would have to search for CD-1 better.
I tried with 4.0r8 businesscard: Such a hang I could reproduce on Linux/ppc and Linux/ppc64 and OSX/ppc64 and Linux/amd64 only when running with qemu-system-sparc64, but not with qemu-system-sparc.
So the problem is in no way limited to ppc, good to know.
Quoted 3 lines
Also, on Linux/ppc64, qemu and qemu-system-x86_64 render Haiku nightly image r34558 x86gcc2 unusable (desktop garbled, no cursor), while on Linux/ppc and OSX/ppc64 (r34514) and Linux/amd64 it works okay.
That's vga/display issue (have you tried -vga std ?, FranГois REVOL mentioned that it works with one of those and doesn't work with others)
Signature · 1 line
mailto:[email protected]