TTY patches for 2.6.33-git
Subsystems (9)
PATCH 1/1 TTY patches for 2.6.33-git
Here's the big TTY patchset for your .33-git tree.
Lots of tiny things, and one driver that had been broken for a long time is removed.
Please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/gregkh/tty-2.6.git/
Patches will be sent to the linux-kernel mailing list, if anyone wants to see them.
thanks,
greg k-h
------------
Documentation/serial/hayes-esp.txt | 154 -- Documentation/serial/tty.txt | 9 +- arch/xtensa/platforms/iss/console.c | 2 +- drivers/char/Kconfig | 13 - drivers/char/Makefile | 1 - drivers/char/bfin_jtag_comm.c | 2 +- drivers/char/epca.c | 2 +- drivers/char/esp.c | 2533 ---------------------------------- drivers/char/isicom.c | 115 +-- drivers/char/istallion.c | 185 +-- drivers/char/moxa.c | 289 ++--- drivers/char/mxser.c | 248 ++-- drivers/char/pcmcia/ipwireless/tty.c | 2 +- drivers/char/pty.c | 2 +- drivers/char/riscom8.c | 89 +- drivers/char/stallion.c | 129 +-- drivers/char/tty_io.c | 151 ++- drivers/char/tty_ldisc.c | 23 +- drivers/char/tty_port.c | 97 ++- drivers/mmc/card/sdio_uart.c | 303 +++-- drivers/serial/8250.c | 24 +- drivers/serial/jsm/jsm.h | 8 - drivers/serial/jsm/jsm_driver.c | 48 +- drivers/serial/jsm/jsm_neo.c | 8 - drivers/serial/jsm/jsm_tty.c | 6 +- drivers/serial/pxa.c | 13 +- drivers/serial/serial_core.c | 33 +- drivers/usb/serial/opticon.c | 7 +- drivers/usb/serial/usb-serial.c | 83 +- fs/devpts/inode.c | 16 +- include/linux/Kbuild | 1 - include/linux/hayesesp.h | 114 -- include/linux/isicom.h | 1 + include/linux/tty.h | 25 +- include/linux/usb/serial.h | 3 - kernel/exit.c | 2 +- 36 files changed, 921 insertions(+), 3820 deletions(-) delete mode 100644 Documentation/serial/hayes-esp.txt delete mode 100644 drivers/char/esp.c delete mode 100644 include/linux/hayesesp.h
---------------
Alan Cox (41):
tty: esp: remove broken driver
tty: istallion: Kill off the BKL ioctl
tty: stallion: kill BKL ioctl
tty_port: add "tty_port_open" helper
tty_port: coding style cleaning pass
usb_serial: Use the shutdown() operation
usb_serial: Kill port mutex
opticon: Fix resume logic
tty_port: Move hupcl handling
sdio_uart: use tty_port
sdio_uart: refcount the tty objects
sdio_uart: Move the open lock
tty: sdio_uart: Switch to the open/close helpers
tty: sdio_uart: Fix termios handling
tty: sdio_uart: Style fixes
tty: sdio_uart: add modem functionality
tty: sdio_uart: Fix the locking on "func" for new code
tty: tty_port: Change the buffer allocator locking
tty: riscom8: switch to the tty_port_open API
tty: tty_port: Add IO_ERROR bit handling
tty: tty_port: Move the IO_ERROR clear
tty: stallion: Convert to the tty_port_open/close methods
tty: istallion: tty port open/close methods
tty: tty_port: Add a kref object to the tty port
tty: isicom: switch to the new tty_port_open helper
tty: isicom: sort out the board init logic
tty: mxser: use the tty_port_open method
tty: mxser: Use the new locking rules to fix setserial properly
tty: isicom: fix deadlock on shutdown
tty: moxa: Use more tty_port ops
tty: moxa: rework the locking a bit
tty: moxa: Locking clean up
tty: moxa: Kill off the throttle method
tty: moxa: Fix modem op locking
tty: moxa: Kill the use of lock_kernel
tty: moxa: split open lock
tty: push the BKL down into the handlers a bit
tty: Push the lock down further into the ldisc code
tty: Push the bkl down a bit in the hangup code
tty: Move the leader test in disassociate
tty: split the lock up a bit further
Alexey Dobriyan (1):
tty: const: constify remaining tty_operations
André Goddard Rosa (3):
serial: fix NULL pointer dereference
serial: cascade needless conditionals serial, 8250: calculate irqflags bitmask before loop
Breno Leitao (1):
jsm: adding EEH handlers
Breno Leitão (7):
jsm: IRQ handlers doesn't need to have IRQ_DISABLED enabled
jsm: Rewriting a bad log message
jsm: remove the ch_custom_speed field
jsm: removing ch_old_baud field
jsm: Remove ch_cpstime field
jsm: Removing unused jsm_channel->ch_wopen field
jsm: removing the field jsm_board->intr_count
Ian Jackson (1):
Serial: Do not read IIR in serial8250_start_tx when UART_BUG_TXEN
Nicolas Pitre (1):
sdio_uart: Fix oops caused by the previous changeset
Sukadev Bhattiprolu (1):
devpts_get_tty() should validate inode
Tilman Schmidt (1):
tty: docs: serial/tty, add to ldisc methods
Uwe Kleine-König (1):
Serial: pxa: work around Errata #75
PATCH 1/58 jsm: IRQ handlers doesn't need to have IRQ_DISABLED enabled
From: Breno Leitão <[email protected]>
Currently jsm is showing the following message when loaded:
IRQ 432/JSM: IRQF_DISABLED is not guaranteed on shared IRQs
It's because the request_irq() is called using IRQF_DISABLED and IRQF_SHARED.
Actually there is no need to use IRQF_DISABLED in this driver.
--- drivers/serial/jsm/jsm_driver.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/serial/jsm/jsm_driver.c +1 -1
@@ -123,7 +123,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device } rc =request_irq (brd->irq, brd->bd_ops->intr, -IRQF_DISABLED |IRQF_SHARED ,"JSM" , brd); +IRQF_SHARED ,"JSM" , brd);if (rc) {printk (KERN_WARNING "Failed to hook IRQ %d\n" ,brd->irq); goto out_iounmap;
Signature · 1 line
1.6.5.5
PATCH 2/58 jsm: Rewriting a bad log message
In reply to Greg KHFrom: Breno Leitão <[email protected]>
Actually jsm displays "Device Added" 8 times (for a 8 port device). This silly patch just makes things more informative, showing the port (instead of the device) that was added.
--- drivers/serial/jsm/jsm_tty.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/serial/jsm/jsm_tty.c +1 -1
@@ -472,7 +472,7 @@ int __devinit jsm_uart_port_init(struct jsm_board *brd)if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port))printk (KERN_INFO "jsm: add device failed\n" );else -printk (KERN_INFO "Added device \n" ); +printk (KERN_INFO "jsm: Port %d added\n" , i); }jsm_printk (INIT ,INFO , &brd->pci_dev,"finish\n" );
Signature · 1 line
1.6.5.5
PATCH 3/58 jsm: remove the ch_custom_speed field
In reply to Greg KHFrom: Breno Leitão <[email protected]>
Currently the ch_custom_speed field exists but is never used, so, this patch removes it.
--- drivers/serial/jsm/jsm.h | 1 - drivers/serial/jsm/jsm_neo.c | 4 ---- 2 files changed, 0 insertions(+), 5 deletions(-)
drivers/serial/jsm/jsm.h +0 -1
@@ -216,7 +216,6 @@ struct jsm_channel {u8 ch_startc;/* Start character */ u32 ch_old_baud;/* Cache of the current baud */ -u32 ch_custom_speed;/* Custom baud, if set */ u32 ch_wopen;/* Waiting for open process cnt */
drivers/serial/jsm/jsm_neo.c +0 -4
@@ -957,10 +957,6 @@ static void neo_param(struct jsm_channel *ch) ch->ch_old_baud =0 ;return ; - }else if (ch->ch_custom_speed) { - baud = ch->ch_custom_speed; -if (ch->ch_flags &CH_BAUD0 ) - ch->ch_flags &= ~(CH_BAUD0 ); }else {int i;unsigned int cflag;
Signature · 1 line
1.6.5.5
PATCH 4/58 jsm: removing ch_old_baud field
In reply to Greg KHFrom: Breno Leitão <[email protected]>
Currently the field jsm_channel->ch_old_baud is not used, just assigned in a lot of places but never used. This patches removes this field.
--- drivers/serial/jsm/jsm.h | 2 -- drivers/serial/jsm/jsm_neo.c | 2 -- drivers/serial/jsm/jsm_tty.c | 2 -- 3 files changed, 0 insertions(+), 6 deletions(-)
drivers/serial/jsm/jsm.h +0 -2
@@ -215,8 +215,6 @@ struct jsm_channel {u8 ch_stopc;/* Stop character */ u8 ch_startc;/* Start character */ -u32 ch_old_baud;/* Cache of the current baud */ -u32 ch_wopen;/* Waiting for open process cnt */ u8 ch_mostat;/* FEP output modem status */
drivers/serial/jsm/jsm_neo.c +0 -2
@@ -954,7 +954,6 @@ static void neo_param(struct jsm_channel *ch) ch->ch_flags |= (CH_BAUD0 ); ch->ch_mostat &= ~(UART_MCR_RTS |UART_MCR_DTR );neo_assert_modem_signals (ch); - ch->ch_old_baud =0 ;return ; }else {
@@ -1041,7 +1040,6 @@ static void neo_param(struct jsm_channel *ch) quot = ch->ch_bd->bd_dividend / baud;if (quot !=0 ) { - ch->ch_old_baud = baud;writeb (UART_LCR_DLAB , &ch->ch_neo_uart->lcr);writeb ((quot &0xff ), &ch->ch_neo_uart->txrx);writeb ((quot >>8 ), &ch->ch_neo_uart->ier);
drivers/serial/jsm/jsm_tty.c +0 -2
@@ -296,8 +296,6 @@ static void jsm_tty_close(struct uart_port *port) bd->bd_ops->assert_modem_signals (channel); } - channel->ch_old_baud =0 ; -/* Turn off UART interrupts for this port */ channel->ch_bd->bd_ops->uart_off (channel);
Signature · 1 line
1.6.5.5
PATCH 5/58 jsm: Remove ch_cpstime field
In reply to Greg KHFrom: Breno Leitão <[email protected]>
Currently the field jsm_channel->ch_cpstime is defined but never used, so this patch removes it.
--- drivers/serial/jsm/jsm.h | 2 -- 1 files changed, 0 insertions(+), 2 deletions(-)
drivers/serial/jsm/jsm.h +0 -2
@@ -206,8 +206,6 @@ struct jsm_channel {u64 ch_close_delay;/* How long we should drop RTS/DTR for */ -u64 ch_cpstime;/* Time for CPS calculations */ -tcflag_t ch_c_iflag;/* channel iflags */ tcflag_t ch_c_cflag;/* channel cflags */ tcflag_t ch_c_oflag;/* channel oflags */
Signature · 1 line
1.6.5.5
PATCH 6/58 jsm: Removing unused jsm_channel->ch_wopen field
In reply to Greg KHFrom: Breno Leitão <[email protected]>
Currently the jsm_channel->ch_wopen field is defined and never used. So, this patch removes it.
--- drivers/serial/jsm/jsm.h | 2 -- 1 files changed, 0 insertions(+), 2 deletions(-)
drivers/serial/jsm/jsm.h +0 -2
@@ -213,8 +213,6 @@ struct jsm_channel {u8 ch_stopc;/* Stop character */ u8 ch_startc;/* Start character */ -u32 ch_wopen;/* Waiting for open process cnt */ -u8 ch_mostat;/* FEP output modem status */ u8 ch_mistat;/* FEP input modem status */
Signature · 1 line
1.6.5.5
PATCH 7/58 jsm: removing the field jsm_board->intr_count
In reply to Greg KHFrom: Breno Leitão <[email protected]>
Currently there is a field in the jsm_board structure to cont the number of interrupt that the card recevived, but it's not working properly when the IRQ line is shared, and also nowhere else this field is used. So, This patch is removing it.
--- drivers/serial/jsm/jsm.h | 1 - drivers/serial/jsm/jsm_neo.c | 2 -- 2 files changed, 0 insertions(+), 3 deletions(-)
drivers/serial/jsm/jsm.h +0 -1
@@ -138,7 +138,6 @@ struct jsm_boardu32 nasync;/* Number of ports on card */ u32 irq;/* Interrupt request number */ -u64 intr_count;/* Count of interrupts */ u64 membase;/* Start of base memory of the card */ u64 membase_end;/* End of base memory of the card */
drivers/serial/jsm/jsm_neo.c +0 -2
@@ -1117,8 +1117,6 @@ static irqreturn_t neo_intr(int irq, void *voidbrd)unsigned long lock_flags2;int outofloop_count =0 ; - brd->intr_count++; -/* Lock out the slow poller from running on this board. */ spin_lock_irqsave (&brd->bd_intr_lock, lock_flags);
Signature · 1 line
1.6.5.5
PATCH 8/58 jsm: adding EEH handlers
In reply to Greg KHFrom: Breno Leitao <[email protected]>
Adding EEH handlers for the serial jsm driver. This patch adds the PCI error handlers and also register them to be called when a error is detected.
--- drivers/serial/jsm/jsm_driver.c | 46 +++++++++++++++++++++++++++++++++++++++ drivers/serial/jsm/jsm_tty.c | 2 +- 2 files changed, 47 insertions(+), 1 deletions(-)
drivers/serial/jsm/jsm_driver.c +46 -0
@@ -48,6 +48,17 @@ struct uart_driver jsm_uart_driver = { .nr = NR_PORTS, }; +static pci_ers_result_t jsm_io_error_detected (struct pci_dev *pdev, +pci_channel_state_t state); +static pci_ers_result_t jsm_io_slot_reset (struct pci_dev *pdev); +static void jsm_io_resume (struct pci_dev *pdev); + +static struct pci_error_handlers jsm_err_handler = { + .error_detected = jsm_io_error_detected, + .slot_reset = jsm_io_slot_reset, + .resume = jsm_io_resume, +}; +int jsm_debug;module_param (jsm_debug, int,0 );MODULE_PARM_DESC (jsm_debug,"Driver debugging level" );
@@ -164,6 +175,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device }pci_set_drvdata (pdev, brd); +pci_save_state (pdev);return 0 ; out_free_irq:
@@ -222,8 +234,42 @@ static struct pci_driver jsm_driver = { .id_table = jsm_pci_tbl, .probe = jsm_probe_one, .remove = __devexit_p(jsm_remove_one), + .err_handler = &jsm_err_handler, }; +static pci_ers_result_t jsm_io_error_detected (struct pci_dev *pdev, +pci_channel_state_t state) +{ +struct jsm_board *brd =pci_get_drvdata (pdev); + +jsm_remove_uart_port (brd); + +return PCI_ERS_RESULT_NEED_RESET ; +} + +static pci_ers_result_t jsm_io_slot_reset (struct pci_dev *pdev) +{ +int rc; + + rc =pci_enable_device (pdev); + +if (rc) +return PCI_ERS_RESULT_DISCONNECT ; + +pci_set_master (pdev); + +return PCI_ERS_RESULT_RECOVERED ; +} + +static void jsm_io_resume (struct pci_dev *pdev) +{ +struct jsm_board *brd =pci_get_drvdata (pdev); + +pci_restore_state (pdev); + +jsm_uart_port_init (brd); +} +static int __init jsm_init_module (void ) {int rc;
drivers/serial/jsm/jsm_tty.c +1 -1
@@ -430,7 +430,7 @@ int __devinit jsm_tty_init(struct jsm_board *brd)return 0 ; } -int __devinit jsm_uart_port_init (struct jsm_board *brd) +int jsm_uart_port_init (struct jsm_board *brd) {int i;unsigned int line;
Signature · 1 line
1.6.5.5
PATCH 9/58 tty: const: constify remaining tty_operations
In reply to Greg KHFrom: Alexey Dobriyan <[email protected]>
--- arch/xtensa/platforms/iss/console.c | 2 +- drivers/char/bfin_jtag_comm.c | 2 +- drivers/char/epca.c | 2 +- drivers/char/pcmcia/ipwireless/tty.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)
arch/xtensa/platforms/iss/console.c +1 -1
@@ -196,7 +196,7 @@ static const struct file_operations rs_proc_fops = { .release = single_release, }; -static struct tty_operations serial_ops = { +static const struct tty_operations serial_ops = { .open = rs_open, .close = rs_close, .write = rs_write,
drivers/char/bfin_jtag_comm.c +1 -1
@@ -226,7 +226,7 @@ bfin_jc_wait_until_sent(struct tty_struct *tty, int timeout) } } -static struct tty_operations bfin_jc_ops = { +static const struct tty_operations bfin_jc_ops = { .open = bfin_jc_open, .close = bfin_jc_close, .write = bfin_jc_write,
drivers/char/epca.c +1 -1
@@ -935,7 +935,7 @@ static int info_open(struct tty_struct *tty, struct file *filp)return 0 ; } -static struct tty_operations info_ops = { +static const struct tty_operations info_ops = { .open = info_open, .ioctl = info_ioctl, };
drivers/char/pcmcia/ipwireless/tty.c +1 -1
@@ -603,7 +603,7 @@ void ipwireless_tty_free(struct ipw_tty *tty) } } -static struct tty_operations tty_ops = { +static const struct tty_operations tty_ops = { .open = ipw_open, .close = ipw_close, .hangup = ipw_hangup,
Signature · 1 line
1.6.5.5
PATCH 10/58 tty: esp: remove broken driver
In reply to Greg KHFrom: Alan Cox <[email protected]>
The ESP driver has been marked broken for years. It's an old ISA device that clearly nobody cares about any more. Remove it
--- Documentation/serial/hayes-esp.txt | 154 --- drivers/char/Kconfig | 13 - drivers/char/Makefile | 1 - drivers/char/esp.c | 2533 ------------------------------------ include/linux/Kbuild | 1 - include/linux/hayesesp.h | 114 -- 6 files changed, 0 insertions(+), 2816 deletions(-) delete mode 100644 Documentation/serial/hayes-esp.txt delete mode 100644 drivers/char/esp.c delete mode 100644 include/linux/hayesesp.h
Documentation/serial/hayes-esp.txt deleted +0 -154
@@ -1,154 +0,0 @@ -HAYES ESP DRIVER VERSION 2.1 - -A big thanks to the people at Hayes, especially Alan Adamson. Their support -has enabled me to provide enhancements to the driver. - -Please report your experiences with this driver to me ([email protected]). I -am looking for both positive and negative feedback. - -*** IMPORTANT CHANGES FOR 2.1 *** -Support for PIO mode. Five situations will cause PIO mode to be used: -1) A multiport card is detected. PIO mode will always be used. (8 port cards -do not support DMA). -2) The DMA channel is set to an invalid value (anything other than 1 or 3). -3) The DMA buffer/channel could not be allocated. The port will revert to PIO -mode until it is reopened. -4) Less than a specified number of bytes need to be transferred to/from the -FIFOs. PIO mode will be used for that transfer only. -5) A port needs to do a DMA transfer and another port is already using the -DMA channel. PIO mode will be used for that transfer only. - -Since the Hayes ESP seems to conflict with other cards (notably sound cards) -when using DMA, DMA is turned off by default. To use DMA, it must be turned -on explicitly, either with the "dma=" option described below or with -setserial. A multiport card can be forced into DMA mode by using setserial; -however, most multiport cards don't support DMA. - -The latest version of setserial allows the enhanced configuration of the ESP -card to be viewed and modified. -*** - -This package contains the files needed to compile a module to support the Hayes -ESP card. The drivers are basically a modified version of the serial drivers. - -Features: - -- Uses the enhanced mode of the ESP card, allowing a wider range of - interrupts and features than compatibility mode -- Uses DMA and 16 bit PIO mode to transfer data to and from the ESP's FIFOs, - reducing CPU load -- Supports primary and secondary ports - - -If the driver is compiled as a module, the IRQs to use can be specified by -using the irq= option. The format is: - -irq=[0x100],[0x140],[0x180],[0x200],[0x240],[0x280],[0x300],[0x380] - -The address in brackets is the base address of the card. The IRQ of -nonexistent cards can be set to 0. If an IRQ of a card that does exist is set -to 0, the driver will attempt to guess at the correct IRQ. For example, to set -the IRQ of the card at address 0x300 to 12, the insmod command would be: - -insmod esp irq=0,0,0,0,0,0,12,0 - -The custom divisor can be set by using the divisor= option. The format is the -same as for the irq= option. Each divisor value is a series of hex digits, -with each digit representing the divisor to use for a corresponding port. The -divisor value is constructed RIGHT TO LEFT. Specifying a nonzero divisor value -will automatically set the spd_cust flag. To calculate the divisor to use for -a certain baud rate, divide the port's base baud (generally 921600) by the -desired rate. For example, to set the divisor of the primary port at 0x300 to -4 and the divisor of the secondary port at 0x308 to 8, the insmod command would -be: - -insmod esp divisor=0,0,0,0,0,0,0x84,0 - -The dma= option can be used to set the DMA channel. The channel can be either -1 or 3. Specifying any other value will force the driver to use PIO mode. -For example, to set the DMA channel to 3, the insmod command would be: - -insmod esp dma=3 - -The rx_trigger= and tx_trigger= options can be used to set the FIFO trigger -levels. They specify when the ESP card should send an interrupt. Larger -values will decrease the number of interrupts; however, a value too high may -result in data loss. Valid values are 1 through 1023, with 768 being the -default. For example, to set the receive trigger level to 512 bytes and the -transmit trigger level to 700 bytes, the insmod command would be: - -insmod esp rx_trigger=512 tx_trigger=700 - -The flow_off= and flow_on= options can be used to set the hardware flow off/ -flow on levels. The flow on level must be lower than the flow off level, and -the flow off level should be higher than rx_trigger. Valid values are 1 -through 1023, with 1016 being the default flow off level and 944 being the -default flow on level. For example, to set the flow off level to 1000 bytes -and the flow on level to 935 bytes, the insmod command would be: - -insmod esp flow_off=1000 flow_on=935 - -The rx_timeout= option can be used to set the receive timeout value. This -value indicates how long after receiving the last character that the ESP card -should wait before signalling an interrupt. Valid values are 0 though 255, -with 128 being the default. A value too high will increase latency, and a -value too low will cause unnecessary interrupts. For example, to set the -receive timeout to 255, the insmod command would be: - -insmod esp rx_timeout=255 - -The pio_threshold= option sets the threshold (in number of characters) for -using PIO mode instead of DMA mode. For example, if this value is 32, -transfers of 32 bytes or less will always use PIO mode. - -insmod esp pio_threshold=32 - -Multiple options can be listed on the insmod command line by separating each -option with a space. For example: - -insmod esp dma=3 trigger=512 - -The esp module can be automatically loaded when needed. To cause this to -happen, add the following lines to /etc/modprobe.conf (replacing the last line -with options for your configuration): - -alias char-major-57 esp -alias char-major-58 esp -options esp irq=0,0,0,0,0,0,3,0 divisor=0,0,0,0,0,0,0x4,0 - -You may also need to run 'depmod -a'. - -Devices must be created manually. To create the devices, note the output from -the module after it is inserted. The output will appear in the location where -kernel messages usually appear (usually /var/adm/messages). Create two devices -for each 'tty' mentioned, one with major of 57 and the other with major of 58. -The minor number should be the same as the tty number reported. The commands -would be (replace ? with the tty number): - -mknod /dev/ttyP? c 57 ? -mknod /dev/cup? c 58 ? - -For example, if the following line appears: - -Oct 24 18:17:23 techno kernel: ttyP8 at 0x0140 (irq = 3) is an ESP primary port - -...two devices should be created: - -mknod /dev/ttyP8 c 57 8 -mknod /dev/cup8 c 58 8 - -You may need to set the permissions on the devices: - -chmod 666 /dev/ttyP* -chmod 666 /dev/cup* - -The ESP module and the serial module should not conflict (they can be used at -the same time). After the ESP module has been loaded the ports on the ESP card -will no longer be accessible by the serial driver. - -If I/O errors are experienced when accessing the port, check for IRQ and DMA -conflicts ('cat /proc/interrupts' and 'cat /proc/dma' for a list of IRQs and -DMAs currently in use). - -Enjoy! -Andrew J. Robinson <[email protected]>
drivers/char/Kconfig +0 -13
@@ -201,19 +201,6 @@ config DIGIEPCA To compile this driver as a module, choose M here: the module will be called epca. -config ESPSERIAL - tristate "Hayes ESP serial port support" - depends on SERIAL_NONSTANDARD && ISA && ISA_DMA_API && BROKEN - help - This is a driver which supports Hayes ESP serial ports. Both single - port cards and multiport cards are supported. Make sure to read - <file:Documentation/hayes-esp.txt>. - - To compile this driver as a module, choose M here: the - module will be called esp. - - If unsure, say N. - config MOXA_INTELLIO tristate "Moxa Intellio support" depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
drivers/char/Makefile +0 -1
@@ -18,7 +18,6 @@ obj-$(CONFIG_CONSOLE_TRANSLATIONS) += consolemap.o consolemap_deftbl.o obj-$(CONFIG_HW_CONSOLE) += vt.o defkeymap.o obj-$(CONFIG_AUDIT) += tty_audit.o obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o -obj-$(CONFIG_ESPSERIAL) += esp.o obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o
drivers/char/esp.c deleted +0 -2533
2,533 lines not on this page · raw message
include/linux/Kbuild +0 -1
@@ -214,7 +214,6 @@ unifdef-y += futex.h unifdef-y += fs.h unifdef-y += gameport.h unifdef-y += generic_serial.h -unifdef-y += hayesesp.h unifdef-y += hdlcdrv.h unifdef-y += hdlc.h unifdef-y += hdreg.h
include/linux/hayesesp.h deleted +0 -114
114 lines not on this page · raw message
Signature · 1 line
1.6.5.5
PATCH 11/58 tty: istallion: Kill off the BKL ioctl
In reply to Greg KHFrom: Alan Cox <[email protected]>
Fairly trivial as the BKL push down into the methods has already been done.
--- drivers/char/istallion.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-)
drivers/char/istallion.c +4 -4
@@ -621,7 +621,7 @@ static int stli_brdinit(struct stlibrd *brdp);static int stli_startbrd (struct stlibrd *brdp);static ssize_t stli_memread (struct file *fp,char __user *buf,size_t count,loff_t *offp);static ssize_t stli_memwrite (struct file *fp,const char __user *buf,size_t count,loff_t *offp); -static int stli_memioctl (struct inode *ip,struct file *fp,unsigned int cmd,unsigned long arg); +static long stli_memioctl (struct file *fp,unsigned int cmd,unsigned long arg);static void stli_brdpoll (struct stlibrd *brdp,cdkhdr_t __iomem *hdrp);static void stli_poll (unsigned long arg);static int stli_hostcmd (struct stlibrd *brdp,struct stliport *portp);
@@ -704,7 +704,7 @@ static const struct file_operations stli_fsiomem = { .owner = THIS_MODULE, .read = stli_memread, .write = stli_memwrite, - .ioctl = stli_memioctl, + .unlocked_ioctl = stli_memioctl, };/*****************************************************************************/
@@ -4311,7 +4311,7 @@ static int stli_getbrdstruct(struct stlibrd __user *arg)* reset it, and start/stop it. */ -static int stli_memioctl (struct inode *ip,struct file *fp,unsigned int cmd,unsigned long arg) +static long stli_memioctl (struct file *fp,unsigned int cmd,unsigned long arg) {struct stlibrd *brdp;int brdnr, rc, done;
@@ -4356,7 +4356,7 @@ static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, un* Now handle the board specific ioctls. These all depend on the * minor number of the device they were called from. */ - brdnr =iminor (ip); + brdnr =iminor (fp->f_dentry->d_inode);if (brdnr >=STL_MAXBRDS )return -ENODEV ; brdp = stli_brds[brdnr];
Signature · 1 line
1.6.5.5
PATCH 12/58 tty: stallion: kill BKL ioctl
In reply to Greg KHFrom: Alan Cox <[email protected]>
--- drivers/char/stallion.c | 13 +++++++------ 1 files changed, 7 insertions(+), 6 deletions(-)
drivers/char/stallion.c +7 -6
@@ -407,7 +407,7 @@ static unsigned int stl_baudrates[] = {* Declare all those functions in this driver! */ -static int stl_memioctl (struct inode *ip,struct file *fp,unsigned int cmd,unsigned long arg); +static long stl_memioctl (struct file *fp,unsigned int cmd,unsigned long arg);static int stl_brdinit (struct stlbrd *brdp);static int stl_getportstats (struct tty_struct *tty,struct stlport *portp,comstats_t __user *cp);static int stl_clrportstats (struct stlport *portp,comstats_t __user *cp);
@@ -607,7 +607,7 @@ static unsigned int sc26198_baudtable[] = {*/ static const struct file_operations stl_fsiomem = { .owner =THIS_MODULE , - .ioctl = stl_memioctl, + .unlocked_ioctl = stl_memioctl, };static struct class *stallion_class;
@@ -2486,18 +2486,19 @@ static int stl_getbrdstruct(struct stlbrd __user *arg)* collection. */ -static int stl_memioctl (struct inode *ip,struct file *fp,unsigned int cmd,unsigned long arg) +static long stl_memioctl (struct file *fp,unsigned int cmd,unsigned long arg) {int brdnr, rc;void __user *argp = (void __user *)arg; -pr_debug ("stl_memioctl(ip=%p,fp=%p,cmd=%x,arg=%lx)\n" , ip, fp, cmd,arg); +pr_debug ("stl_memioctl(fp=%p,cmd=%x,arg=%lx)\n" , fp, cmd,arg); - brdnr =iminor (ip); + brdnr =iminor (fp->f_dentry->d_inode);if (brdnr >=STL_MAXBRDS )return -ENODEV ; rc =0 ; +lock_kernel ();switch (cmd) {case COM_GETPORTSTATS : rc =stl_getportstats (NULL ,NULL , argp);
@@ -2518,7 +2519,7 @@ static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, uns rc = -ENOIOCTLCMD ;break ; } - +unlock_kernel ();return rc; }
Signature · 1 line
1.6.5.5
PATCH 13/58 tty_port: add "tty_port_open" helper
In reply to Greg KHFrom: Alan Cox <[email protected]>
For the moment this just moves the USB logic over and fixes the 'what if we open and hangup at the same time' race noticed by Oliver Neukum.
--- drivers/char/tty_port.c | 36 +++++++++++++++++++++++++++- drivers/usb/serial/usb-serial.c | 49 ++++++++++++++++----------------------- include/linux/tty.h | 10 +++++++- 3 files changed, 64 insertions(+), 31 deletions(-)
drivers/char/tty_port.c +35 -1
@@ -99,10 +99,11 @@ EXPORT_SYMBOL(tty_port_tty_set);static void tty_port_shutdown (struct tty_port *port) { +mutex_lock (&port->mutex);if (port->ops->shutdown &&test_and_clear_bit (ASYNCB_INITIALIZED , &port->flags)) port->ops->shutdown (port); - +mutex_unlock (&port->mutex); }/**
@@ -381,3 +382,36 @@ void tty_port_close(struct tty_port *port, struct tty_struct *tty,tty_port_tty_set (port,NULL ); }EXPORT_SYMBOL (tty_port_close); + +int tty_port_open (struct tty_port *port,struct tty_struct *tty, +struct file *filp) +{ +spin_lock_irq (&port->lock); +if (!tty_hung_up_p (filp)) + ++port->count; +spin_unlock_irq (&port->lock); +tty_port_tty_set (port, tty); + +/* +* Do the device-specific open only if the hardware isn't +* already initialized. Serialize open and shutdown using the +* port mutex. +*/ + +mutex_lock (&port->mutex); + +if (!test_bit (ASYNCB_INITIALIZED , &port->flags)) { +if (port->ops->activate) { +int retval = port->ops->activate (port, tty); +if (retval) { +mutex_unlock (&port->mutex); +return retval; + } + } +set_bit (ASYNCB_INITIALIZED , &port->flags); + } +mutex_unlock (&port->mutex); +return tty_port_block_til_ready (port, tty, filp); +} + +EXPORT_SYMBOL (tty_port_open);
drivers/usb/serial/usb-serial.c +20 -29
67 lines not on this page · raw message
include/linux/tty.h +9 -1
@@ -190,9 +190,15 @@ struct tty_port_operations {/* Control the DTR line */ void (*dtr_rts)(struct tty_port *port,int raise);/* Called when the last close completes or a hangup finishes -IFF the port was initialized. Do not use to free resources */ +IFF the port was initialized. Do not use to free resources. Called +under the port mutex to serialize against activate/shutdowns */ void (*shutdown)(struct tty_port *port);void (*drop)(struct tty_port *port); +/* Called under the port mutex from tty_port_open, serialized using +the port mutex */ +/* FIXME: long term getting the tty argument *out* of this would be +good for consoles */ +int (*activate)(struct tty_port *port,struct tty_struct *tty); };struct tty_port {
@@ -467,6 +473,8 @@ extern int tty_port_close_start(struct tty_port *port,extern void tty_port_close_end (struct tty_port *port,struct tty_struct *tty);extern void tty_port_close (struct tty_port *port,struct tty_struct *tty,struct file *filp); +extern int tty_port_open (struct tty_port *port, +struct tty_struct *tty,struct file *filp);extern inline int tty_port_users (struct tty_port *port) {return port->count + port->blocked_open;
Signature · 1 line
1.6.5.5
PATCH 14/58 tty_port: coding style cleaning pass
In reply to Greg KHFrom: Alan Cox <[email protected]>
Mind the hoover wire...
--- drivers/char/tty_port.c | 25 +++++++++++++------------ 1 files changed, 13 insertions(+), 12 deletions(-)
drivers/char/tty_port.c +13 -12
@@ -199,7 +199,7 @@ EXPORT_SYMBOL(tty_port_lower_dtr_rts);* management of these lines. Note that the dtr/rts raise is done each * iteration as a hangup may have previously dropped them while we wait. */ - +int tty_port_block_til_ready (struct tty_port *port,struct tty_struct *tty,struct file *filp) {
@@ -254,7 +254,8 @@ int tty_port_block_til_ready(struct tty_port *port,tty_port_raise_dtr_rts (port);prepare_to_wait (&port->open_wait, &wait,TASK_INTERRUPTIBLE ); -/* Check for a hangup or uninitialised port. Return accordingly */ +/* Check for a hangup or uninitialised port. +Return accordingly */ if (tty_hung_up_p (filp) || !(port->flags &ASYNC_INITIALIZED )) {if (port->flags &ASYNC_HUP_NOTIFY ) retval = -EAGAIN ;
@@ -286,11 +287,11 @@ int tty_port_block_til_ready(struct tty_port *port, port->flags |=ASYNC_NORMAL_ACTIVE ;spin_unlock_irqrestore (&port->lock, flags);return retval; - }EXPORT_SYMBOL (tty_port_block_til_ready); -int tty_port_close_start (struct tty_port *port,struct tty_struct *tty,struct file *filp) +int tty_port_close_start (struct tty_port *port, +struct tty_struct *tty,struct file *filp) {unsigned long flags;
@@ -300,7 +301,7 @@ int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct freturn 0 ; } -if ( tty->count ==1 && port->count !=1 ) { +if (tty->count ==1 && port->count !=1 ) {printk (KERN_WARNING "tty_port_close_start: tty->count = 1 port count = %d.\n" , port->count);
@@ -332,8 +333,8 @@ int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct flong timeout;if (bps >1200 ) - timeout =max_t (long, (HZ *10 * port->drain_delay) / bps, -HZ /10 ); + timeout =max_t (long, + (HZ *10 * port->drain_delay) / bps,HZ /10 );else timeout =2 *HZ ;schedule_timeout_interruptible (timeout);
@@ -384,7 +385,7 @@ void tty_port_close(struct tty_port *port, struct tty_struct *tty,EXPORT_SYMBOL (tty_port_close);int tty_port_open (struct tty_port *port,struct tty_struct *tty, -struct file *filp) +struct file *filp) {spin_lock_irq (&port->lock);if (!tty_hung_up_p (filp))
@@ -404,10 +405,10 @@ int tty_port_open(struct tty_port *port, struct tty_struct *tty,if (port->ops->activate) {int retval = port->ops->activate (port, tty);if (retval) { -mutex_unlock (&port->mutex); -return retval; - } - } +mutex_unlock (&port->mutex); +return retval; + } + }set_bit (ASYNCB_INITIALIZED , &port->flags); }mutex_unlock (&port->mutex);
Signature · 1 line
1.6.5.5
PATCH 15/58 usb_serial: Use the shutdown() operation
In reply to Greg KHFrom: Alan Cox <[email protected]>
As Alan Stern pointed out - now we have tty_port_open the shutdown method and locking allow us to whack the other bits into the full helper methods and provide a shutdown op which the tty port code will synchronize with setup for us.
--- drivers/usb/serial/usb-serial.c | 39 +++++++++++---------------------------- 1 files changed, 11 insertions(+), 28 deletions(-)
drivers/usb/serial/usb-serial.c +11 -28
@@ -254,15 +254,12 @@ static int serial_activate(struct tty_port *tport, struct tty_struct *tty)struct usb_serial *serial = port->serial;int retval; -if (mutex_lock_interruptible (&port->mutex)) -return -ERESTARTSYS ;mutex_lock (&serial->disc_mutex);if (serial->disconnected) retval = -ENODEV ;else retval = port->serial->type->open (tty, port);mutex_unlock (&serial->disc_mutex); -mutex_unlock (&port->mutex);return retval; }
@@ -276,57 +273,40 @@ static int serial_open(struct tty_struct *tty, struct file *filp)/** * serial_down - shut down hardware -* @port: port to shut down +* @tport: tty port to shut down * * Shut down a USB serial port unless it is the console. We never -* shut down the console hardware as it will always be in use. +* shut down the console hardware as it will always be in use. Serialized +* against activate by the tport mutex and kept to matching open/close pairs +* of calls by the ASYNCB_INITIALIZED flag. */ -static void serial_down (struct usb_serial_port *port) +static void serial_down (struct tty_port *tport) { +struct usb_serial_port *port = + container_of(tport, struct usb_serial_port, port);struct usb_serial_driver *drv = port->serial->type; -/* * The console is magical. Do not hang up the console hardware * or there will be tears. */ if (port->console)return ; - -/* Don't call the close method if the hardware hasn't been -* initialized. -*/ -if (!test_and_clear_bit (ASYNCB_INITIALIZED , &port->port.flags)) -return ; - -mutex_lock (&port->mutex);if (drv->close) drv->close (port); -mutex_unlock (&port->mutex); }static void serial_hangup (struct tty_struct *tty) {struct usb_serial_port *port = tty->driver_data; -dbg ("%s - port %d" , __func__, port->number); - -serial_down (port);tty_port_hangup (&port->port); }static void serial_close (struct tty_struct *tty,struct file *filp) {struct usb_serial_port *port = tty->driver_data; -dbg ("%s - port %d" , __func__, port->number); - -if (tty_hung_up_p (filp)) -return ; -if (tty_port_close_start (&port->port, tty, filp) ==0 ) -return ; -serial_down (port); -tty_port_close_end (&port->port, tty); -tty_port_tty_set (&port->port,NULL ); +tty_port_close (&port->port, tty, filp); }/**
@@ -716,6 +696,7 @@ static const struct tty_port_operations serial_port_ops = { .carrier_raised = serial_carrier_raised, .dtr_rts = serial_dtr_rts, .activate = serial_activate, + .shutdown = serial_down, }; int usb_serial_probe(struct usb_interface *interface,
@@ -914,6 +895,8 @@ int usb_serial_probe(struct usb_interface *interface, port->port.ops = &serial_port_ops; port->serial = serial;spin_lock_init (&port->lock); +/* Keep this for private driver use for the moment but +should probably go away */ mutex_init (&port->mutex);INIT_WORK (&port->work, usb_serial_port_work); serial->port[i] = port;
Signature · 1 line
1.6.5.5
PATCH 16/58 usb_serial: Kill port mutex
In reply to Greg KHFrom: Alan Cox <[email protected]>
The tty port has a port mutex used for all the port related locking so we don't need the one in the USB serial layer any more.
--- drivers/usb/serial/opticon.c | 4 ++-- drivers/usb/serial/usb-serial.c | 1 - include/linux/usb/serial.h | 3 --- 3 files changed, 2 insertions(+), 6 deletions(-)
drivers/usb/serial/opticon.c +2 -2
@@ -501,12 +501,12 @@ static int opticon_resume(struct usb_interface *intf)struct usb_serial_port *port = serial->port[0 ];int result; -mutex_lock (&port->mutex); +mutex_lock (&port->port.mutex);if (port->port.count) result =usb_submit_urb (priv->bulk_read_urb,GFP_NOIO );else result =0 ; -mutex_unlock (&port->mutex); +mutex_unlock (&port->port.mutex);return result; }
drivers/usb/serial/usb-serial.c +0 -1
@@ -897,7 +897,6 @@ int usb_serial_probe(struct usb_interface *interface,spin_lock_init (&port->lock);/* Keep this for private driver use for the moment but should probably go away */ -mutex_init (&port->mutex);INIT_WORK (&port->work, usb_serial_port_work); serial->port[i] = port; port->dev.parent = &interface->dev;
include/linux/usb/serial.h +0 -3
@@ -39,8 +39,6 @@ enum port_dev_state {* @serial: pointer back to the struct usb_serial owner of this port. * @port: pointer to the corresponding tty_port for this port. * @lock: spinlock to grab when updating portions of this structure. -* @mutex: mutex used to synchronize serial_open() and serial_close() -* access for this port. * @number: the number of the port (the minor number). * @interrupt_in_buffer: pointer to the interrupt in buffer for this port. * @interrupt_in_urb: pointer to the interrupt in struct urb for this port.
@@ -77,7 +75,6 @@ struct usb_serial_port {struct usb_serial *serial;struct tty_port port;spinlock_t lock; -struct mutex mutex;unsigned char number;unsigned char *interrupt_in_buffer;
Signature · 1 line
1.6.5.5
PATCH 17/58 opticon: Fix resume logic
In reply to Greg KHFrom: Alan Cox <[email protected]>
Opticon now takes the right mutex to check the port status but the status check is done wrongly for the modern serial code, so fix it.
--- drivers/usb/serial/opticon.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)
drivers/usb/serial/opticon.c +2 -1
@@ -502,7 +502,8 @@ static int opticon_resume(struct usb_interface *intf)int result;mutex_lock (&port->port.mutex); -if (port->port.count) +/* This is protected by the port mutex against close/open */ +if (test_bit (ASYNCB_INITIALIZED , &port->port.flags)) result =usb_submit_urb (priv->bulk_read_urb,GFP_NOIO );else result =0 ;
Signature · 1 line
1.6.5.5
PATCH 18/58 serial: fix NULL pointer dereference
In reply to Greg KHFrom: André Goddard Rosa <[email protected]>
If kzalloc() or alloc_tty_driver() fails, we call:
put_tty_driver(normal = NULL).
Then:
put_tty_driver -> tty_driver_kref_put -> kref_put(&NULL->kref, ...)
--- drivers/serial/serial_core.c | 21 +++++++++++---------- 1 files changed, 11 insertions(+), 10 deletions(-)
drivers/serial/serial_core.c +11 -10
@@ -2344,7 +2344,7 @@ static const struct tty_operations uart_ops = {*/ int uart_register_driver (struct uart_driver *drv) { -struct tty_driver *normal =NULL ; +struct tty_driver *normal;int i, retval;BUG_ON (drv->state);
@@ -2354,13 +2354,12 @@ int uart_register_driver(struct uart_driver *drv)* we have a large number of ports to handle. */ drv->state =kzalloc (sizeof (struct uart_state ) * drv->nr,GFP_KERNEL ); - retval = -ENOMEM ;if (!drv->state) goto out; - normal =alloc_tty_driver (drv->nr); + normal =alloc_tty_driver (drv->nr);if (!normal) - goto out; + goto out_kfree; drv->tty_driver = normal;
@@ -2393,12 +2392,14 @@ int uart_register_driver(struct uart_driver *drv) } retval =tty_register_driver (normal); - out: -if (retval <0 ) { -put_tty_driver (normal); -kfree (drv->state); - } -return retval; +if (retval >=0 ) +return retval; + +put_tty_driver (normal); +out_kfree: +kfree (drv->state); +out: +return -ENOMEM ; }/**
Signature · 1 line
1.6.5.5
PATCH 19/58 serial: cascade needless conditionals
In reply to Greg KHFrom: André Goddard Rosa <[email protected]>
--- drivers/serial/serial_core.c | 12 +++++------- 1 files changed, 5 insertions(+), 7 deletions(-)
drivers/serial/serial_core.c +5 -7
@@ -342,11 +342,11 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,if (flags ==UPF_SPD_HI ) altbaud =57600 ; -if (flags ==UPF_SPD_VHI ) +else if (flags ==UPF_SPD_VHI ) altbaud =115200 ; -if (flags ==UPF_SPD_SHI ) +else if (flags ==UPF_SPD_SHI ) altbaud =230400 ; -if (flags ==UPF_SPD_WARP ) +else if (flags ==UPF_SPD_WARP ) altbaud =460800 ;for (try =0 ; try <2 ; try++) {
@@ -1217,9 +1217,8 @@ static void uart_set_termios(struct tty_struct *tty,/* Handle transition to B0 status */ if ((old_termios->c_cflag &CBAUD ) && !(cflag &CBAUD ))uart_clear_mctrl (state->uart_port,TIOCM_RTS |TIOCM_DTR ); -/* Handle transition away from B0 status */ -if (!(old_termios->c_cflag &CBAUD ) && (cflag &CBAUD )) { +else if (!(old_termios->c_cflag &CBAUD ) && (cflag &CBAUD )) {unsigned int mask =TIOCM_DTR ;if (!(cflag &CRTSCTS ) || !test_bit (TTY_THROTTLED , &tty->flags))
@@ -1234,9 +1233,8 @@ static void uart_set_termios(struct tty_struct *tty,__uart_start (tty);spin_unlock_irqrestore (&state->uart_port->lock, flags); } -/* Handle turning on CRTSCTS */ -if (!(old_termios->c_cflag &CRTSCTS ) && (cflag &CRTSCTS )) { +else if (!(old_termios->c_cflag &CRTSCTS ) && (cflag &CRTSCTS )) {spin_lock_irqsave (&state->uart_port->lock, flags);if (!(state->uart_port->ops->get_mctrl (state->uart_port) &TIOCM_CTS )) { tty->hw_stopped =1 ;
Signature · 1 line
1.6.5.5
PATCH 20/58 serial, 8250: calculate irqflags bitmask before loop
In reply to Greg KHFrom: André Goddard Rosa <[email protected]>
--- drivers/serial/8250.c | 16 ++++++++++------ 1 files changed, 10 insertions(+), 6 deletions(-)
drivers/serial/8250.c +10 -6
@@ -2646,7 +2646,7 @@ static void __init serial8250_isa_init_ports(void) {struct uart_8250_port *up;static int first =1 ; -int i; +int i, irqflag =0 ;if (!first)return ;
@@ -2670,6 +2670,9 @@ static void __init serial8250_isa_init_ports(void) up->port.ops = &serial8250_pops; } +if (share_irqs) + irqflag =IRQF_SHARED ; +for (i =0 , up = serial8250_ports; i <ARRAY_SIZE (old_serial_port) && i < nr_uarts; i++, up++) {
@@ -2683,8 +2686,7 @@ static void __init serial8250_isa_init_ports(void) up->port.iotype = old_serial_port[i].io_type; up->port.regshift = old_serial_port[i].iomem_reg_shift;set_io_from_upio (&up->port); -if (share_irqs) - up->port.irqflags |=IRQF_SHARED ; + up->port.irqflags |= irqflag; } }
@@ -2940,10 +2942,13 @@ static int __devinit serial8250_probe(struct platform_device *dev) {struct plat_serial8250_port *p = dev->dev.platform_data;struct uart_port port; -int ret, i; +int ret, i, irqflag =0 ;memset (&port,0 ,sizeof (struct uart_port )); +if (share_irqs) + irqflag =IRQF_SHARED ; +for (i =0 ; p && p->flags !=0 ; p++, i++) { port.iobase = p->iobase; port.membase = p->membase;
@@ -2960,8 +2965,7 @@ static int __devinit serial8250_probe(struct platform_device *dev) port.serial_in = p->serial_in; port.serial_out = p->serial_out; port.dev = &dev->dev; -if (share_irqs) - port.irqflags |=IRQF_SHARED ; + port.irqflags |= irqflag; ret =serial8250_register_port (&port);if (ret <0 ) { dev_err(&dev->dev, "unable to register port at index %d "
Signature · 1 line
1.6.5.5
PATCH 21/58 Serial: pxa: work around Errata #75
In reply to Greg KHFrom: Uwe Kleine-König <[email protected]>
Intel(R) PXA27x Processor Family Specification Update (Nov 2005) says:
E75. UART: Baud rate may not be programmed correctly on
back-to-back writes.
Problem:
When programming the Divisor Latch registers, Low and High (DLL and DLH), with back-to-back writes, the second register write may not take effect. The result is an incorrect baud rate.
Workaround:
After programming the first Divisor Latch register, read and verify it before programming the second Divisor Latch register.
This was hit when changing the baud rate from 115200 to 9600 while receiving characters at 9600 Bd.
And fixed indention of some comments nearby.
--- drivers/serial/pxa.c | 13 +++++++++++-- 1 files changed, 11 insertions(+), 2 deletions(-)
drivers/serial/pxa.c +11 -2
@@ -438,6 +438,7 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios,unsigned char cval, fcr =0 ;unsigned long flags;unsigned int baud, quot; +unsigned int dll;switch (termios->c_cflag &CSIZE ) {case CS5 :
@@ -534,10 +535,18 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios,else up->mcr &= ~UART_MCR_AFE ; -serial_out (up,UART_LCR , cval |UART_LCR_DLAB );/* set DLAB */ +serial_out (up,UART_LCR , cval |UART_LCR_DLAB );/* set DLAB */ serial_out (up,UART_DLL , quot &0xff );/* LS of divisor */ + +/* +* work around Errata #75 according to Intel(R) PXA27x Processor Family +* Specification Update (Nov 2005) +*/ + dll =serial_in (up,UART_DLL ); +WARN_ON (dll != (quot &0xff )); +serial_out (up,UART_DLM , quot >>8 );/* MS of divisor */ -serial_out (up,UART_LCR , cval);/* reset DLAB */ +serial_out (up,UART_LCR , cval);/* reset DLAB */ up->lcr = cval;/* Save LCR */ serial_pxa_set_mctrl (&up->port, up->port.mctrl);serial_out (up,UART_FCR , fcr);
Signature · 1 line
1.6.5.5
PATCH 22/58 tty: docs: serial/tty, add to ldisc methods
In reply to Greg KHFrom: Tilman Schmidt <[email protected]>
A small addition to the ldisc method descriptions.
--- Documentation/serial/tty.txt | 9 +++++++-- 1 files changed, 7 insertions(+), 2 deletions(-)
Documentation/serial/tty.txt +7 -2
@@ -42,7 +42,8 @@ TTY side interfaces: open() - Called when the line discipline is attached to the terminal. No other call into the line discipline for this tty will occur until it - completes successfully. Can sleep. + completes successfully. Returning an error will + prevent the ldisc from being attached. Can sleep. close() - This is called on a terminal when the line discipline is being unplugged. At the point of
@@ -52,7 +53,7 @@ close() - This is called on a terminal when the line hangup() - Called when the tty line is hung up. The line discipline should cease I/O to the tty. No further calls into the ldisc code will occur. - Can sleep. + The return value is ignored. Can sleep. write() - A process is writing data through the line discipline. Multiple write calls are serialized
@@ -83,6 +84,10 @@ ioctl() - Called when an ioctl is handed to the tty layer that might be for the ldisc. Multiple ioctl calls may occur in parallel. May sleep. +compat_ioctl() - Called when a 32 bit ioctl is handed to the tty layer + that might be for the ldisc. Multiple ioctl calls + may occur in parallel. May sleep. + Driver Side Interfaces: receive_buf() - Hand buffers of bytes from the driver to the ldisc
Signature · 1 line
1.6.5.5
PATCH 23/58 Serial: Do not read IIR in serial8250_start_tx when UART_BUG_TXEN
In reply to Greg KHFrom: Ian Jackson <[email protected]>
Do not read IIR in serial8250_start_tx when UART_BUG_TXEN
Reading the IIR clears some oustanding interrupts so it is not safe. Instead, simply transmit immediately if the buffer is empty without regard to IIR.
--- drivers/serial/8250.c | 8 +++----- 1 files changed, 3 insertions(+), 5 deletions(-)
drivers/serial/8250.c +3 -5
@@ -1339,14 +1339,12 @@ static void serial8250_start_tx(struct uart_port *port)serial_out (up,UART_IER , up->ier);if (up->bugs &UART_BUG_TXEN ) { -unsigned char lsr, iir; +unsigned char lsr; lsr =serial_in (up,UART_LSR ); up->lsr_saved_flags |= lsr &LSR_SAVE_FLAGS ; - iir =serial_in (up,UART_IIR ) &0x0f ;if ((up->port.type ==PORT_RM9000 ) ? - (lsr &UART_LSR_THRE && - (iir ==UART_IIR_NO_INT || iir ==UART_IIR_THRI )) : - (lsr &UART_LSR_TEMT && iir &UART_IIR_NO_INT )) + (lsr &UART_LSR_THRE ) : + (lsr &UART_LSR_TEMT ))transmit_chars (up); } }
Signature · 1 line
1.6.5.5
PATCH 24/58 devpts_get_tty() should validate inode
In reply to Greg KHFrom: Sukadev Bhattiprolu <[email protected]>
devpts_get_tty() assumes that the inode passed in is associated with a valid pty. But if the only reference to the pty is via a bind-mount, the inode passed to devpts_get_tty() while valid, would refer to a pty that no longer exists.
With a lot of debug effort, Grzegorz Nosek developed a small program (see below) to reproduce a crash on recent kernels. This crash is a regression introduced by the commit:
commit 527b3e4773628b30d03323a2cb5fb0d84441990f Author: Sukadev Bhattiprolu <[email protected]> Date: Mon Oct 13 10:43:08 2008 +0100
To fix, ensure that the dentry associated with the inode has not yet been deleted/unhashed by devpts_pty_kill().
See also:
https://lists.linux-foundation.org/pipermail/containers/2009-July/019273.html
tty-bug.c:
#define _GNU_SOURCE
#include <fcntl.h>
#include <sched.h>
#include <stdlib.h>
#include <sys/mount.h>
#include <sys/signal.h>
#include <unistd.h>
#include <stdio.h>
#include <linux/fs.h>
void dummy(int sig)
{
}
static int child(void *unused)
{
int fd;
signal(SIGINT, dummy); signal(SIGHUP, dummy);
pause(); /* cheesy synchronisation to wait for /dev/pts/0 to appear */
mount("/dev/pts/0", "/dev/console", NULL, MS_BIND, NULL);
sleep(2);
fd = open("/dev/console", O_RDWR);
dup(0); dup(0);
write(1, "Hello world!\n", sizeof("Hello world!\n")-1);
return 0;
}int main(void)
{
pid_t pid;
char *stack;
stack = malloc(16384);
pid = clone(child, stack+16384, CLONE_NEWNS|SIGCHLD, NULL);
open("/dev/ptmx", O_RDWR|O_NOCTTY|O_NONBLOCK);
unlockpt(fd); grantpt(fd);
sleep(2);
kill(pid, SIGHUP);
sleep(1);
return 0; /* exit before child opens /dev/console */
}--- fs/devpts/inode.c | 16 ++++++++++++++-- 1 files changed, 14 insertions(+), 2 deletions(-)
fs/devpts/inode.c +14 -2
@@ -517,11 +517,23 @@ int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty)struct tty_struct *devpts_get_tty (struct inode *pts_inode,int number) { +struct dentry *dentry; +struct tty_struct *tty; +BUG_ON (pts_inode->i_rdev ==MKDEV (TTYAUX_MAJOR ,PTMX_MINOR )); +/* Ensure dentry has not been deleted by devpts_pty_kill() */ + dentry =d_find_alias (pts_inode); +if (!dentry) +return NULL ; + + tty =NULL ;if (pts_inode->i_sb->s_magic ==DEVPTS_SUPER_MAGIC ) -return (struct tty_struct *)pts_inode->i_private; -return NULL ; + tty = (struct tty_struct *)pts_inode->i_private; + +dput (dentry); + +return tty; }void devpts_pty_kill (struct tty_struct *tty)
Signature · 1 line
1.6.5.5
PATCH 25/58 tty_port: Move hupcl handling
In reply to Greg KHFrom: Alan Cox <[email protected]>
Move the HUCPL handling from the end of close_port_start to the beginning of close_port_end. What this actually does is change the ordering from
port shutdown port->dtr_rts
to
port->dtr_rts port shutdown
Some hardware drops the physical connection on shutdown so we must perform the port operations before the shutdown.
--- drivers/char/tty_port.c | 13 ++++++++----- 1 files changed, 8 insertions(+), 5 deletions(-)
drivers/char/tty_port.c +8 -5
@@ -339,6 +339,14 @@ int tty_port_close_start(struct tty_port *port, timeout =2 *HZ ;schedule_timeout_interruptible (timeout); } +/* Flush the ldisc buffering */ +tty_ldisc_flush (tty); + +/* Drop DTR/RTS if HUPCL is set. This causes any attached modem to +hang up the line */ +if (tty->termios->c_cflag &HUPCL ) +tty_port_lower_dtr_rts (port); +/* Don't call port->drop for the last reference. Callers will want to drop the last active reference in ->shutdown() or the tty shutdown path */
@@ -350,11 +358,6 @@ void tty_port_close_end(struct tty_port *port, struct tty_struct *tty) {unsigned long flags; -tty_ldisc_flush (tty); - -if (tty->termios->c_cflag &HUPCL ) -tty_port_lower_dtr_rts (port); -spin_lock_irqsave (&port->lock, flags); tty->closing =0 ;
Signature · 1 line
1.6.5.5
PATCH 26/58 sdio_uart: use tty_port
In reply to Greg KHFrom: Alan Cox <[email protected]>
Add a tty_port object to the sdio uart. For the moment just begin using the tty field of the port, as this is the critical one to clean up.
--- drivers/mmc/card/sdio_uart.c | 41 +++++++++++++++++++++++------------------ 1 files changed, 23 insertions(+), 18 deletions(-)
drivers/mmc/card/sdio_uart.c +23 -18
@@ -73,6 +73,7 @@ struct uart_icount { };struct sdio_uart_port { +struct tty_port port;struct kref kref;struct tty_struct *tty;unsigned int index;
@@ -172,7 +173,7 @@ static void sdio_uart_port_remove(struct sdio_uart_port *port) port->func =NULL ;mutex_unlock (&port->func_lock);if (port->opened) -tty_hangup (port->tty); +tty_hangup (port->port.tty);mutex_unlock (&port->open_lock);sdio_release_irq (func);sdio_disable_func (func);
@@ -391,7 +392,7 @@ static void sdio_uart_stop_rx(struct sdio_uart_port *port)static void sdio_uart_receive_chars (struct sdio_uart_port *port,unsigned int *status) { -struct tty_struct *tty = port->tty; +struct tty_struct *tty = port->port.tty;unsigned int ch, flag;int max_count =256 ;
@@ -446,6 +447,7 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port) {struct circ_buf *xmit = &port->xmit;int count; +struct tty_struct *tty = port->port.tty;if (port->x_char) {sdio_out (port,UART_TX , port->x_char);
@@ -453,7 +455,7 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port) port->x_char =0 ;return ; } -if (circ_empty (xmit) || port->tty->stopped || port->tty->hw_stopped) { +if (circ_empty (xmit) || tty->stopped || tty->hw_stopped) {sdio_uart_stop_tx (port);return ; }
@@ -468,7 +470,7 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port) }while (--count >0 );if (circ_chars_pending (xmit) <WAKEUP_CHARS ) -tty_wakeup (port->tty); +tty_wakeup (tty);if (circ_empty (xmit))sdio_uart_stop_tx (port);
@@ -477,6 +479,7 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port)static void sdio_uart_check_modem_status (struct sdio_uart_port *port) {int status; +struct tty_struct *tty = port->port.tty; status =sdio_in (port,UART_MSR );
@@ -491,17 +494,17 @@ static void sdio_uart_check_modem_status(struct sdio_uart_port *port) port->icount.dcd++;if (status &UART_MSR_DCTS ) { port->icount.cts++; -if (port->tty->termios->c_cflag &CRTSCTS ) { +if (tty->termios->c_cflag &CRTSCTS ) {int cts = (status &UART_MSR_CTS ); -if (port->tty->hw_stopped) { +if (tty->hw_stopped) {if (cts) { - port->tty->hw_stopped =0 ; + tty->hw_stopped =0 ;sdio_uart_start_tx (port); -tty_wakeup (port->tty); +tty_wakeup (tty); } }else {if (!cts) { - port->tty->hw_stopped =1 ; + tty->hw_stopped =1 ;sdio_uart_stop_tx (port); } }
@@ -546,12 +549,13 @@ static int sdio_uart_startup(struct sdio_uart_port *port) {unsigned long page;int ret; +struct tty_struct *tty = port->port.tty;/* * Set the TTY IO error marker - we will only clear this * once we have successfully opened the port. */ -set_bit (TTY_IO_ERROR , &port->tty->flags); +set_bit (TTY_IO_ERROR , &tty->flags);/* Initialise and allocate the transmit buffer. */ page =__get_free_page (GFP_KERNEL );
@@ -595,14 +599,14 @@ static int sdio_uart_startup(struct sdio_uart_port *port) port->ier =UART_IER_RLSI |UART_IER_RDI |UART_IER_RTOIE |UART_IER_UUE ; port->mctrl =TIOCM_OUT2 ; -sdio_uart_change_speed (port, port->tty->termios,NULL ); +sdio_uart_change_speed (port, tty->termios,NULL ); -if (port->tty->termios->c_cflag &CBAUD ) +if (tty->termios->c_cflag &CBAUD )sdio_uart_set_mctrl (port,TIOCM_RTS |TIOCM_DTR ); -if (port->tty->termios->c_cflag &CRTSCTS ) +if (tty->termios->c_cflag &CRTSCTS )if (!(sdio_uart_get_mctrl (port) &TIOCM_CTS )) - port->tty->hw_stopped =1 ; + tty->hw_stopped =1 ;clear_bit (TTY_IO_ERROR , &port->tty->flags);
@@ -634,7 +638,7 @@ static void sdio_uart_shutdown(struct sdio_uart_port *port)/* TODO: wait here for TX FIFO to drain */ /* Turn off DTR and RTS early. */ -if (port->tty->termios->c_cflag &HUPCL ) +if (port->port.tty->termios->c_cflag &HUPCL )sdio_uart_clear_mctrl (port,TIOCM_DTR |TIOCM_RTS );/* Disable interrupts from this port */
@@ -684,11 +688,11 @@ static int sdio_uart_open(struct tty_struct *tty, struct file *filp)if (!port->opened) { tty->driver_data = port; - port->tty = tty; + port->port.tty = tty; ret =sdio_uart_startup (port);if (ret) { tty->driver_data =NULL ; - port->tty =NULL ; + port->port.tty =NULL ;mutex_unlock (&port->open_lock);sdio_uart_port_put (port);return ret;
@@ -723,7 +727,7 @@ static void sdio_uart_close(struct tty_struct *tty, struct file * filp) tty->closing =1 ;sdio_uart_shutdown (port);tty_ldisc_flush (tty); - port->tty =NULL ; + port->port.tty =NULL ; tty->driver_data =NULL ; tty->closing =0 ; }
@@ -1068,6 +1072,7 @@ static int sdio_uart_probe(struct sdio_func *func, port->func = func;sdio_set_drvdata (func, port); +tty_port_init (&port->port); ret =sdio_uart_add_port (port);if (ret) {
Signature · 1 line
1.6.5.5
PATCH 27/58 sdio_uart: Fix oops caused by the previous changeset
In reply to Greg KHFrom: Nicolas Pitre <[email protected]>
Now... testing reveals that the very first patch "sdio_uart: use tty_port" causes a segmentation fault in sdio_uart_open():
Unable to handle kernel NULL pointer dereference at virtual address 00000084 pgd = dfb44000 [00000084] *pgd=1fb99031, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT last sysfs file: /sys/devices/platform/mvsdio/mmc_host/mmc0/mmc0:f111/uevent Modules linked in: CPU: 0 Not tainted (2.6.32-rc5-next-20091102-00001-gb36eae9 #10) PC is at sdio_uart_open+0x204/0x2cc
[...]
--- drivers/mmc/card/sdio_uart.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/mmc/card/sdio_uart.c +1 -1
@@ -608,7 +608,7 @@ static int sdio_uart_startup(struct sdio_uart_port *port)if (!(sdio_uart_get_mctrl (port) &TIOCM_CTS )) tty->hw_stopped =1 ; -clear_bit (TTY_IO_ERROR , &port->tty->flags); +clear_bit (TTY_IO_ERROR , &tty->flags);/* Kick the IRQ handler once while we're still holding the host lock */ sdio_uart_irq (port->func);
Signature · 1 line
1.6.5.5
PATCH 28/58 sdio_uart: refcount the tty objects
In reply to Greg KHFrom: Alan Cox <[email protected]>
The tty can go away underneath us, so we must refcount it. Do the naïve implementation initially. We will worry about startup shortly.
--- drivers/mmc/card/sdio_uart.c | 59 +++++++++++++++++++++++++++++------------ 1 files changed, 42 insertions(+), 17 deletions(-)
drivers/mmc/card/sdio_uart.c +42 -17
@@ -172,8 +172,13 @@ static void sdio_uart_port_remove(struct sdio_uart_port *port)sdio_claim_host (func); port->func =NULL ;mutex_unlock (&port->func_lock); -if (port->opened) -tty_hangup (port->port.tty); +if (port->opened) { +struct tty_struct *tty =tty_port_tty_get (&port->port); +/* tty_hangup is async so is this safe as is ?? */ +if (tty) +tty_hangup (tty); +tty_kref_put (tty); + }mutex_unlock (&port->open_lock);sdio_release_irq (func);sdio_disable_func (func);
@@ -392,7 +397,7 @@ static void sdio_uart_stop_rx(struct sdio_uart_port *port)static void sdio_uart_receive_chars (struct sdio_uart_port *port,unsigned int *status) { -struct tty_struct *tty = port->port.tty; +struct tty_struct *tty =tty_port_tty_get (&port->port);unsigned int ch, flag;int max_count =256 ;
@@ -429,25 +434,30 @@ static void sdio_uart_receive_chars(struct sdio_uart_port *port, }if ((*status & port->ignore_status_mask & ~UART_LSR_OE ) ==0 ) -tty_insert_flip_char (tty, ch, flag); +if (tty) +tty_insert_flip_char (tty, ch, flag);/* * Overrun is special. Since it's reported immediately, * it doesn't affect the current character. */ if (*status & ~port->ignore_status_mask &UART_LSR_OE ) -tty_insert_flip_char (tty,0 ,TTY_OVERRUN ); +if (tty) +tty_insert_flip_char (tty,0 ,TTY_OVERRUN ); *status =sdio_in (port,UART_LSR ); }while ((*status &UART_LSR_DR ) && (max_count-- >0 )); -tty_flip_buffer_push (tty); +if (tty) { +tty_flip_buffer_push (tty); +tty_kref_put (tty); + } }static void sdio_uart_transmit_chars (struct sdio_uart_port *port) {struct circ_buf *xmit = &port->xmit;int count; -struct tty_struct *tty = port->port.tty; +struct tty_struct *tty;if (port->x_char) {sdio_out (port,UART_TX , port->x_char);
@@ -455,8 +465,12 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port) port->x_char =0 ;return ; } -if (circ_empty (xmit) || tty->stopped || tty->hw_stopped) { + + tty =tty_port_tty_get (&port->port); + +if (tty ==NULL ||circ_empty (xmit) || tty->stopped || tty->hw_stopped) {sdio_uart_stop_tx (port); +tty_kref_put (tty);return ; }
@@ -474,12 +488,13 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port)if (circ_empty (xmit))sdio_uart_stop_tx (port); +tty_kref_put (tty); }static void sdio_uart_check_modem_status (struct sdio_uart_port *port) {int status; -struct tty_struct *tty = port->port.tty; +struct tty_struct *tty; status =sdio_in (port,UART_MSR );
@@ -494,7 +509,8 @@ static void sdio_uart_check_modem_status(struct sdio_uart_port *port) port->icount.dcd++;if (status &UART_MSR_DCTS ) { port->icount.cts++; -if (tty->termios->c_cflag &CRTSCTS ) { + tty =tty_port_tty_get (&port->port); +if (tty && (tty->termios->c_cflag &CRTSCTS )) {int cts = (status &UART_MSR_CTS );if (tty->hw_stopped) {if (cts) {
@@ -509,6 +525,7 @@ static void sdio_uart_check_modem_status(struct sdio_uart_port *port) } } } +tty_kref_put (tty); } }
@@ -548,8 +565,10 @@ static void sdio_uart_irq(struct sdio_func *func)static int sdio_uart_startup (struct sdio_uart_port *port) {unsigned long page; -int ret; -struct tty_struct *tty = port->port.tty; +int ret = -ENOMEM ; +struct tty_struct *tty =tty_port_tty_get (&port->port); + +/* FIXME: What if it is NULL ?? */ /* * Set the TTY IO error marker - we will only clear this
@@ -560,7 +579,7 @@ static int sdio_uart_startup(struct sdio_uart_port *port)/* Initialise and allocate the transmit buffer. */ page =__get_free_page (GFP_KERNEL );if (!page) -return -ENOMEM ; + goto err0; port->xmit.buf = (unsigned char *)page;circ_clear (&port->xmit);
@@ -614,6 +633,7 @@ static int sdio_uart_startup(struct sdio_uart_port *port)sdio_uart_irq (port->func);sdio_uart_release_func (port); +tty_kref_put (tty);return 0 ; err3:
@@ -622,12 +642,15 @@ err2:sdio_uart_release_func (port); err1:free_page ((unsigned long )port->xmit.buf); +err0: +tty_kref_put (tty);return ret; }static void sdio_uart_shutdown (struct sdio_uart_port *port) {int ret; +struct tty_struct *tty; ret =sdio_uart_claim_func (port);if (ret)
@@ -637,9 +660,11 @@ static void sdio_uart_shutdown(struct sdio_uart_port *port)/* TODO: wait here for TX FIFO to drain */ + tty =tty_port_tty_get (&port->port);/* Turn off DTR and RTS early. */ -if (port->port.tty->termios->c_cflag &HUPCL ) +if (tty && (tty->termios->c_cflag &HUPCL ))sdio_uart_clear_mctrl (port,TIOCM_DTR |TIOCM_RTS ); +tty_kref_put (tty);/* Disable interrupts from this port */ sdio_release_irq (port->func);
@@ -688,11 +713,11 @@ static int sdio_uart_open(struct tty_struct *tty, struct file *filp)if (!port->opened) { tty->driver_data = port; - port->port.tty = tty; +tty_port_tty_set (&port->port, tty); ret =sdio_uart_startup (port);if (ret) { tty->driver_data =NULL ; - port->port.tty =NULL ; +tty_port_tty_set (&port->port,NULL );mutex_unlock (&port->open_lock);sdio_uart_port_put (port);return ret;
@@ -727,7 +752,7 @@ static void sdio_uart_close(struct tty_struct *tty, struct file * filp) tty->closing =1 ;sdio_uart_shutdown (port);tty_ldisc_flush (tty); - port->port.tty =NULL ; +tty_port_tty_set (&port->port,NULL ); tty->driver_data =NULL ; tty->closing =0 ; }
Signature · 1 line
1.6.5.5
PATCH 29/58 sdio_uart: Move the open lock
In reply to Greg KHFrom: Alan Cox <[email protected]>
When we move to the tty_port logic the port mutex will protect open v close v hangup. Move to this first in the existing open code so we have a bisection point.
--- drivers/mmc/card/sdio_uart.c | 20 +++++++++----------- 1 files changed, 9 insertions(+), 11 deletions(-)
drivers/mmc/card/sdio_uart.c +9 -11
@@ -78,7 +78,6 @@ struct sdio_uart_port {struct tty_struct *tty;unsigned int index;unsigned int opened; -struct mutex open_lock;struct sdio_func *func;struct mutex func_lock;struct task_struct *in_sdio_uart_irq;
@@ -103,7 +102,6 @@ static int sdio_uart_add_port(struct sdio_uart_port *port)int index, ret = -EBUSY ;kref_init (&port->kref); -mutex_init (&port->open_lock);mutex_init (&port->func_lock);spin_lock_init (&port->write_lock);
@@ -166,7 +164,7 @@ static void sdio_uart_port_remove(struct sdio_uart_port *port)* give up on that port ASAP. * Beware: the lock ordering is critical. */ -mutex_lock (&port->open_lock); +mutex_lock (&port->port.mutex);mutex_lock (&port->func_lock); func = port->func;sdio_claim_host (func);
@@ -179,7 +177,7 @@ static void sdio_uart_port_remove(struct sdio_uart_port *port)tty_hangup (tty);tty_kref_put (tty); } -mutex_unlock (&port->open_lock); +mutex_unlock (&port->port.mutex);sdio_release_irq (func);sdio_disable_func (func);sdio_release_host (func);
@@ -699,14 +697,14 @@ static int sdio_uart_open(struct tty_struct *tty, struct file *filp)if (!port)return -ENODEV ; -mutex_lock (&port->open_lock); +mutex_lock (&port->port.mutex);/* * Make sure not to mess up with a dead port * which has not been closed yet. */ if (tty->driver_data && tty->driver_data != port) { -mutex_unlock (&port->open_lock); +mutex_unlock (&port->port.mutex);sdio_uart_port_put (port);return -EBUSY ; }
@@ -718,13 +716,13 @@ static int sdio_uart_open(struct tty_struct *tty, struct file *filp)if (ret) { tty->driver_data =NULL ;tty_port_tty_set (&port->port,NULL ); -mutex_unlock (&port->open_lock); +mutex_unlock (&port->port.mutex);sdio_uart_port_put (port);return ret; } } port->opened++; -mutex_unlock (&port->open_lock); +mutex_unlock (&port->port.mutex);return 0 ; }
@@ -735,7 +733,7 @@ static void sdio_uart_close(struct tty_struct *tty, struct file * filp)if (!port)return ; -mutex_lock (&port->open_lock); +mutex_lock (&port->port.mutex);BUG_ON (!port->opened);/*
@@ -744,7 +742,7 @@ static void sdio_uart_close(struct tty_struct *tty, struct file * filp)* is larger than port->count. */ if (tty->count > port->opened) { -mutex_unlock (&port->open_lock); +mutex_unlock (&port->port.mutex);return ; }
@@ -756,7 +754,7 @@ static void sdio_uart_close(struct tty_struct *tty, struct file * filp) tty->driver_data =NULL ; tty->closing =0 ; } -mutex_unlock (&port->open_lock); +mutex_unlock (&port->port.mutex);sdio_uart_port_put (port); }
Signature · 1 line
1.6.5.5
PATCH 30/58 tty: sdio_uart: Switch to the open/close helpers
In reply to Greg KHFrom: Alan Cox <[email protected]>
Gets us proper tty semantics, removes some code and fixes up a few corner case races (hangup during open etc)
--- drivers/mmc/card/sdio_uart.c | 201 +++++++++++++++++++++++++----------------- 1 files changed, 119 insertions(+), 82 deletions(-)
drivers/mmc/card/sdio_uart.c +119 -82
@@ -77,7 +77,6 @@ struct sdio_uart_port {struct kref kref;struct tty_struct *tty;unsigned int index; -unsigned int opened;struct sdio_func *func;struct mutex func_lock;struct task_struct *in_sdio_uart_irq;
@@ -150,6 +149,7 @@ static void sdio_uart_port_put(struct sdio_uart_port *port)static void sdio_uart_port_remove (struct sdio_uart_port *port) {struct sdio_func *func; +struct tty_struct *tty;BUG_ON (sdio_uart_table[port->index] != port);
@@ -170,11 +170,10 @@ static void sdio_uart_port_remove(struct sdio_uart_port *port)sdio_claim_host (func); port->func =NULL ;mutex_unlock (&port->func_lock); -if (port->opened) { -struct tty_struct *tty =tty_port_tty_get (&port->port); -/* tty_hangup is async so is this safe as is ?? */ -if (tty) -tty_hangup (tty); + tty =tty_port_tty_get (&port->port); +/* tty_hangup is async so is this safe as is ?? */ +if (tty) { +tty_hangup (tty);tty_kref_put (tty); }mutex_unlock (&port->port.mutex);
@@ -560,13 +559,46 @@ static void sdio_uart_irq(struct sdio_func *func) port->in_sdio_uart_irq =NULL ; } -static int sdio_uart_startup (struct sdio_uart_port *port) +/** +* uart_dtr_rts - port helper to set uart signals +* @tport: tty port to be updated +* @onoff: set to turn on DTR/RTS +* +* Called by the tty port helpers when the modem signals need to be +* adjusted during an open, close and hangup. +*/ + +static void uart_dtr_rts (struct tty_port *tport,int onoff) { -unsigned long page; -int ret = -ENOMEM ; -struct tty_struct *tty =tty_port_tty_get (&port->port); +struct sdio_uart_port *port = + container_of(tport, struct sdio_uart_port, port); +if (onoff ==0 ) +sdio_uart_clear_mctrl (port,TIOCM_DTR |TIOCM_RTS ); +else +sdio_uart_set_mctrl (port,TIOCM_DTR |TIOCM_RTS ); +} -/* FIXME: What if it is NULL ?? */ +/** +* sdio_uart_activate - start up hardware +* @tport: tty port to activate +* @tty: tty bound to this port +* +* Activate a tty port. The port locking guarantees us this will be +* run exactly once per set of opens, and if successful will see the +* shutdown method run exactly once to match. Start up and shutdown are +* protected from each other by the internal locking and will not run +* at the same time even during a hangup event. +* +* If we successfully start up the port we take an extra kref as we +* will keep it around until shutdown when the kref is dropped. +*/ + +static int sdio_uart_activate (struct tty_port *tport,struct tty_struct *tty) +{ +struct sdio_uart_port *port = + container_of(tport, struct sdio_uart_port, port); +unsigned long page; +int ret;/* * Set the TTY IO error marker - we will only clear this
@@ -577,7 +609,7 @@ static int sdio_uart_startup(struct sdio_uart_port *port)/* Initialise and allocate the transmit buffer. */ page =__get_free_page (GFP_KERNEL );if (!page) - goto err0; +return -ENOMEM ; port->xmit.buf = (unsigned char *)page;circ_clear (&port->xmit);
@@ -631,7 +663,6 @@ static int sdio_uart_startup(struct sdio_uart_port *port)sdio_uart_irq (port->func);sdio_uart_release_func (port); -tty_kref_put (tty);return 0 ; err3:
@@ -640,15 +671,25 @@ err2:sdio_uart_release_func (port); err1:free_page ((unsigned long )port->xmit.buf); -err0: -tty_kref_put (tty);return ret; } -static void sdio_uart_shutdown (struct sdio_uart_port *port) + +/** +* sdio_uart_shutdown - stop hardware +* @tport: tty port to shut down +* +* Deactivate a tty port. The port locking guarantees us this will be +* run only if a successful matching activate already ran. The two are +* protected from each other by the internal locking and will not run +* at the same time even during a hangup event. +*/ + +static void sdio_uart_shutdown (struct tty_port *tport) { +struct sdio_uart_port *port = + container_of(tport, struct sdio_uart_port, port);int ret; -struct tty_struct *tty; ret =sdio_uart_claim_func (port);if (ret)
@@ -656,14 +697,6 @@ static void sdio_uart_shutdown(struct sdio_uart_port *port)sdio_uart_stop_rx (port); -/* TODO: wait here for TX FIFO to drain */ - - tty =tty_port_tty_get (&port->port); -/* Turn off DTR and RTS early. */ -if (tty && (tty->termios->c_cflag &HUPCL )) -sdio_uart_clear_mctrl (port,TIOCM_DTR |TIOCM_RTS ); -tty_kref_put (tty); -/* Disable interrupts from this port */ sdio_release_irq (port->func); port->ier =0 ;
@@ -688,74 +721,68 @@ skip:free_page ((unsigned long )port->xmit.buf); } -static int sdio_uart_open (struct tty_struct *tty,struct file *filp) -{ -struct sdio_uart_port *port; -int ret; - - port =sdio_uart_port_get (tty->index); -if (!port) -return -ENODEV ; - -mutex_lock (&port->port.mutex); +/** +* sdio_uart_install - install method +* @driver: the driver in use (sdio_uart in our case) +* @tty: the tty being bound +* +* Look up and bind the tty and the driver together. Initialize +* any needed private data (in our case the termios) +*/ -/* -* Make sure not to mess up with a dead port -* which has not been closed yet. -*/ -if (tty->driver_data && tty->driver_data != port) { -mutex_unlock (&port->port.mutex); +static int sdio_uart_install (struct tty_driver *driver,struct tty_struct *tty) +{ +int idx = tty->index; +struct sdio_uart_port *port =sdio_uart_port_get (idx); +int ret =tty_init_termios (tty); + +if (ret ==0 ) { +tty_driver_kref_get (driver); + tty->count++; +/* This is the ref sdio_uart_port get provided */ + tty->driver_data = port; + driver->ttys[idx] = tty; + }else sdio_uart_port_put (port); -return -EBUSY ; - } +return ret; -if (!port->opened) { - tty->driver_data = port; -tty_port_tty_set (&port->port, tty); - ret =sdio_uart_startup (port); -if (ret) { - tty->driver_data =NULL ; -tty_port_tty_set (&port->port,NULL ); -mutex_unlock (&port->port.mutex); -sdio_uart_port_put (port); -return ret; - } - } - port->opened++; -mutex_unlock (&port->port.mutex); -return 0 ; } -static void sdio_uart_close (struct tty_struct *tty,struct file * filp) +/** +* sdio_uart_cleanup - called on the last tty kref drop +* @tty: the tty being destroyed +* +* Called asynchronously when the last reference to the tty is dropped. +* We cannot destroy the tty->driver_data port kref until this point +*/ + +static void sdio_uart_cleanup (struct tty_struct *tty) {struct sdio_uart_port *port = tty->driver_data; + tty->driver_data =NULL ;/* Bug trap */ +sdio_uart_port_put (port); +} -if (!port) -return ; +/* +* Open/close/hangup is now entirely boilerplate +*/ -mutex_lock (&port->port.mutex); -BUG_ON (!port->opened); +static int sdio_uart_open (struct tty_struct *tty,struct file *filp) +{ +struct sdio_uart_port *port = tty->driver_data; +return tty_port_open (&port->port, tty, filp); +} -/* -* This is messy. The tty layer calls us even when open() -* returned an error. Ignore this close request if tty->count -* is larger than port->count. -*/ -if (tty->count > port->opened) { -mutex_unlock (&port->port.mutex); -return ; - } +static void sdio_uart_close (struct tty_struct *tty,struct file * filp) +{ +struct sdio_uart_port *port = tty->driver_data; +tty_port_close (&port->port, tty, filp); +} -if (--port->opened ==0 ) { - tty->closing =1 ; -sdio_uart_shutdown (port); -tty_ldisc_flush (tty); -tty_port_tty_set (&port->port,NULL ); - tty->driver_data =NULL ; - tty->closing =0 ; - } -mutex_unlock (&port->port.mutex); -sdio_uart_port_put (port); +static void sdio_uart_hangup (struct tty_struct *tty) +{ +struct sdio_uart_port *port = tty->driver_data; +tty_port_hangup (&port->port); } static int sdio_uart_write(struct tty_struct * tty, const unsigned char *buf,
@@ -1021,6 +1048,12 @@ static const struct file_operations sdio_uart_proc_fops = { .release = single_release, }; +static const struct tty_port_operations sdio_uart_port_ops = { + .dtr_rts = uart_dtr_rts, + .shutdown = sdio_uart_shutdown, + .activate = sdio_uart_activate, +}; +static const struct tty_operations sdio_uart_ops = { .open = sdio_uart_open, .close = sdio_uart_close,
@@ -1031,9 +1064,12 @@ static const struct tty_operations sdio_uart_ops = { .throttle = sdio_uart_throttle, .unthrottle = sdio_uart_unthrottle, .set_termios = sdio_uart_set_termios, + .hangup = sdio_uart_hangup, .break_ctl = sdio_uart_break_ctl, .tiocmget = sdio_uart_tiocmget, .tiocmset = sdio_uart_tiocmset, + .install = sdio_uart_install, + .cleanup = sdio_uart_cleanup, .proc_fops = &sdio_uart_proc_fops, };
@@ -1096,6 +1132,7 @@ static int sdio_uart_probe(struct sdio_func *func, port->func = func;sdio_set_drvdata (func, port);tty_port_init (&port->port); + port->port.ops = &sdio_uart_port_ops; ret =sdio_uart_add_port (port);if (ret) {
Signature · 1 line
1.6.5.5
PATCH 31/58 tty: sdio_uart: Fix termios handling
In reply to Greg KHFrom: Alan Cox <[email protected]>
Switching between two non standard baud rates fails because of the cflag test. Do as we did elsewhere and just kill the "optimisation".
--- drivers/mmc/card/sdio_uart.c | 6 ------ 1 files changed, 0 insertions(+), 6 deletions(-)
drivers/mmc/card/sdio_uart.c +0 -6
@@ -902,12 +902,6 @@ static void sdio_uart_set_termios(struct tty_struct *tty, struct ktermios *old_tstruct sdio_uart_port *port = tty->driver_data;unsigned int cflag = tty->termios->c_cflag; -#define RELEVANT_IFLAG (iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) - -if ((cflag ^ old_termios->c_cflag) ==0 && -RELEVANT_IFLAG (tty->termios->c_iflag ^ old_termios->c_iflag) ==0 ) -return ; -if (sdio_uart_claim_func (port) !=0 )return ;
Signature · 1 line
1.6.5.5
PATCH 32/58 tty: sdio_uart: Style fixes
In reply to Greg KHFrom: Alan Cox <[email protected]>
Running the current code through checkpatch shows a few bits of noise mostly but not entirely from before the changes.
--- drivers/mmc/card/sdio_uart.c | 23 ++++++++++++----------- 1 files changed, 12 insertions(+), 11 deletions(-)
drivers/mmc/card/sdio_uart.c +12 -11
@@ -465,7 +465,8 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port) tty =tty_port_tty_get (&port->port); -if (tty ==NULL ||circ_empty (xmit) || tty->stopped || tty->hw_stopped) { +if (tty ==NULL ||circ_empty (xmit) || + tty->stopped || tty->hw_stopped) {sdio_uart_stop_tx (port);tty_kref_put (tty);return ;
@@ -645,7 +646,7 @@ static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty)*/ sdio_out (port,UART_LCR ,UART_LCR_WLEN8 ); - port->ier =UART_IER_RLSI |UART_IER_RDI |UART_IER_RTOIE |UART_IER_UUE ; + port->ier =UART_IER_RLSI |UART_IER_RDI |UART_IER_RTOIE |UART_IER_UUE ; port->mctrl =TIOCM_OUT2 ;sdio_uart_change_speed (port, tty->termios,NULL );
@@ -674,7 +675,6 @@ err1:return ret; } -/** * sdio_uart_shutdown - stop hardware * @tport: tty port to shut down
@@ -745,7 +745,6 @@ static int sdio_uart_install(struct tty_driver *driver, struct tty_struct *tty) }else sdio_uart_port_put (port);return ret; - }/**
@@ -785,7 +784,7 @@ static void sdio_uart_hangup(struct tty_struct *tty)tty_port_hangup (&port->port); } -static int sdio_uart_write (struct tty_struct * tty,const unsigned char *buf, +static int sdio_uart_write (struct tty_struct *tty,const unsigned char *buf,int count) {struct sdio_uart_port *port = tty->driver_data;
@@ -810,7 +809,7 @@ static int sdio_uart_write(struct tty_struct * tty, const unsigned char *buf, }spin_unlock (&port->write_lock); -if ( !(port->ier &UART_IER_THRI )) { +if (!(port->ier &UART_IER_THRI )) {int err =sdio_uart_claim_func (port);if (!err) {sdio_uart_start_tx (port);
@@ -897,7 +896,8 @@ static void sdio_uart_unthrottle(struct tty_struct *tty)sdio_uart_release_func (port); } -static void sdio_uart_set_termios (struct tty_struct *tty,struct ktermios *old_termios) +static void sdio_uart_set_termios (struct tty_struct *tty, +struct ktermios *old_termios) {struct sdio_uart_port *port = tty->driver_data;unsigned int cflag = tty->termios->c_cflag;
@@ -976,7 +976,7 @@ static int sdio_uart_tiocmset(struct tty_struct *tty, struct file *file,int result; result =sdio_uart_claim_func (port); -if (!result) { +if (!result) {sdio_uart_update_mctrl (port, set, clear);sdio_uart_release_func (port); }
@@ -994,7 +994,7 @@ static int sdio_uart_proc_show(struct seq_file *m, void *v)struct sdio_uart_port *port =sdio_uart_port_get (i);if (port) {seq_printf (m,"%d: uart:SDIO" , i); -if (capable (CAP_SYS_ADMIN )) { +if (capable (CAP_SYS_ADMIN )) {seq_printf (m," tx:%d rx:%d" , port->icount.tx, port->icount.rx);if (port->icount.frame)
@@ -1100,7 +1100,7 @@ static int sdio_uart_probe(struct sdio_func *func, }if (!tpl) {printk (KERN_WARNING -"%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n" , +"%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n" ,sdio_func_id (func));kfree (port);return -EINVAL ;
@@ -1133,7 +1133,8 @@ static int sdio_uart_probe(struct sdio_func *func,kfree (port); }else {struct device *dev; - dev =tty_register_device (sdio_uart_tty_driver, port->index, &func->dev); + dev =tty_register_device (sdio_uart_tty_driver, + port->index, &func->dev);if (IS_ERR (dev)) {sdio_uart_port_remove (port); ret =PTR_ERR (dev);
Signature · 1 line
1.6.5.5
PATCH 33/58 tty: sdio_uart: add modem functionality
In reply to Greg KHFrom: Alan Cox <[email protected]>
Add the POSIX block for carrier
Linux TIOCMIWAIT functionality is still lacking from the driver.
--- drivers/mmc/card/sdio_uart.c | 33 ++++++++++++++++++++++++++++++++- 1 files changed, 32 insertions(+), 1 deletions(-)
drivers/mmc/card/sdio_uart.c +32 -1
@@ -29,6 +29,7 @@#include <linux/module.h> #include <linux/init.h> #include <linux/kernel.h> +#include <linux/sched.h> #include <linux/mutex.h> #include <linux/seq_file.h> #include <linux/serial_reg.h>
@@ -86,6 +87,7 @@ struct sdio_uart_port {struct uart_icount icount;unsigned int uartclk;unsigned int mctrl; +unsigned int rx_mctrl;unsigned int read_status_mask;unsigned int ignore_status_mask;unsigned char x_char;
@@ -220,6 +222,8 @@ static unsigned int sdio_uart_get_mctrl(struct sdio_uart_port *port)unsigned char status;unsigned int ret; +/* FIXME: What stops this losing the delta bits and breaking +sdio_uart_check_modem_status ? */ status =sdio_in (port,UART_MSR ); ret =0 ;
@@ -503,8 +507,20 @@ static void sdio_uart_check_modem_status(struct sdio_uart_port *port) port->icount.rng++;if (status &UART_MSR_DDSR ) port->icount.dsr++; -if (status &UART_MSR_DDCD ) +if (status &UART_MSR_DDCD ) { port->icount.dcd++; +/* DCD raise - wake for open */ +if (status &UART_MSR_DCD ) +wake_up_interruptible (&port->port.open_wait); +else { +/* DCD drop - hang up if tty attached */ + tty =tty_port_tty_get (&port->port); +if (tty) { +tty_hangup (tty); +tty_kref_put (tty); + } + } + }if (status &UART_MSR_DCTS ) { port->icount.cts++; tty =tty_port_tty_get (&port->port);
@@ -560,6 +576,20 @@ static void sdio_uart_irq(struct sdio_func *func) port->in_sdio_uart_irq =NULL ; } +static int uart_carrier_raised (struct tty_port *tport) +{ +struct sdio_uart_port *port = + container_of(tport, struct sdio_uart_port, port); +unsigned int ret =sdio_uart_claim_func (port); +if (ret)/* Missing hardware shoudn't block for carrier */ +return 1 ; + ret =sdio_uart_get_mctrl (port); +sdio_uart_release_func (port); +if (ret &TIOCM_CAR ) +return 1 ; +return 0 ; +} +/** * uart_dtr_rts - port helper to set uart signals * @tport: tty port to be updated
@@ -1044,6 +1074,7 @@ static const struct file_operations sdio_uart_proc_fops = {static const struct tty_port_operations sdio_uart_port_ops = { .dtr_rts = uart_dtr_rts, + .carrier_raised = uart_carrier_raised, .shutdown = sdio_uart_shutdown, .activate = sdio_uart_activate, };
Signature · 1 line
1.6.5.5
PATCH 34/58 tty: sdio_uart: Fix the locking on "func" for new code
In reply to Greg KHFrom: Alan Cox <[email protected]>
The new dtr_rts function didn't take the port->func lock as it should so add use of the lock there.
--- drivers/mmc/card/sdio_uart.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)
drivers/mmc/card/sdio_uart.c +4 -0
@@ -603,10 +603,14 @@ static void uart_dtr_rts(struct tty_port *tport, int onoff) {struct sdio_uart_port *port = container_of(tport, struct sdio_uart_port, port); +int ret =sdio_uart_claim_func (port); +if (ret) +return ;if (onoff ==0 )sdio_uart_clear_mctrl (port,TIOCM_DTR |TIOCM_RTS );else sdio_uart_set_mctrl (port,TIOCM_DTR |TIOCM_RTS ); +sdio_uart_release_func (port); }/**
Signature · 1 line
1.6.5.5
PATCH 35/58 tty: tty_port: Change the buffer allocator locking
In reply to Greg KHFrom: Alan Cox <[email protected]>
We want to be able to do this without regard for the activate/own open method being used which causes a problem using port->mutex. Add another mutex for now. Once everything uses port_open to do buffer allocs we can kill it back off
--- drivers/char/tty_port.c | 9 +++++---- include/linux/tty.h | 1 + 2 files changed, 6 insertions(+), 4 deletions(-)
drivers/char/tty_port.c +5 -4
@@ -25,6 +25,7 @@ void tty_port_init(struct tty_port *port)init_waitqueue_head (&port->close_wait);init_waitqueue_head (&port->delta_msr_wait);mutex_init (&port->mutex); +mutex_init (&port->buf_mutex);spin_lock_init (&port->lock); port->close_delay = (50 *HZ ) /100 ; port->closing_wait = (3000 *HZ ) /100 ;
@@ -34,10 +35,10 @@ EXPORT_SYMBOL(tty_port_init);int tty_port_alloc_xmit_buf (struct tty_port *port) {/* We may sleep in get_zeroed_page() */ -mutex_lock (&port->mutex); +mutex_lock (&port->buf_mutex);if (port->xmit_buf ==NULL ) port->xmit_buf = (unsigned char *)get_zeroed_page (GFP_KERNEL ); -mutex_unlock (&port->mutex); +mutex_unlock (&port->buf_mutex);if (port->xmit_buf ==NULL )return -ENOMEM ;return 0 ;
@@ -46,12 +47,12 @@ EXPORT_SYMBOL(tty_port_alloc_xmit_buf);void tty_port_free_xmit_buf (struct tty_port *port) { -mutex_lock (&port->mutex); +mutex_lock (&port->buf_mutex);if (port->xmit_buf !=NULL ) {free_page ((unsigned long )port->xmit_buf); port->xmit_buf =NULL ; } -mutex_unlock (&port->mutex); +mutex_unlock (&port->buf_mutex); }EXPORT_SYMBOL (tty_port_free_xmit_buf);
include/linux/tty.h +1 -0
@@ -212,6 +212,7 @@ struct tty_port {wait_queue_head_t delta_msr_wait;/* Modem status change */ unsigned long flags;/* TTY flags ASY_*/ struct mutex mutex;/* Locking */ +struct mutex buf_mutex;/* Buffer alloc lock */ unsigned char *xmit_buf;/* Optional buffer */ unsigned int close_delay;/* Close port delay */ unsigned int closing_wait;/* Delay for output */
Signature · 1 line
1.6.5.5
PATCH 36/58 tty: riscom8: switch to the tty_port_open API
In reply to Greg KHFrom: Alan Cox <[email protected]>
--- drivers/char/riscom8.c | 89 ++++++++++++++++++++++-------------------------- 1 files changed, 41 insertions(+), 48 deletions(-)
drivers/char/riscom8.c +41 -48
@@ -793,26 +793,21 @@ static void rc_change_speed(struct tty_struct *tty, struct riscom_board *bp, }/* Must be called with interrupts enabled */ -static int rc_setup_port (struct tty_struct *tty,struct riscom_board *bp, -struct riscom_port *port) +static int rc_activate_port (struct tty_port *port,struct tty_struct *tty) { + struct riscom_port *rp = container_of(port, struct riscom_port, port); +struct riscom_board *bp =port_Board (rp);unsigned long flags; -if (port->port.flags &ASYNC_INITIALIZED ) -return 0 ; - -if (tty_port_alloc_xmit_buf (&port->port) <0 ) +if (tty_port_alloc_xmit_buf (port) <0 )return -ENOMEM ;spin_lock_irqsave (&riscom_lock, flags);clear_bit (TTY_IO_ERROR , &tty->flags); -if (port->port.count ==1 ) - bp->count++; - port->xmit_cnt = port->xmit_head = port->xmit_tail =0 ; -rc_change_speed (tty, bp, port); - port->port.flags |=ASYNC_INITIALIZED ; - + bp->count++; + rp->xmit_cnt = rp->xmit_head = rp->xmit_tail =0 ; +rc_change_speed (tty, bp, rp);spin_unlock_irqrestore (&riscom_lock, flags);return 0 ; }
@@ -821,9 +816,6 @@ static int rc_setup_port(struct tty_struct *tty, struct riscom_board *bp,static void rc_shutdown_port (struct tty_struct *tty,struct riscom_board *bp,struct riscom_port *port) { -if (!(port->port.flags &ASYNC_INITIALIZED )) -return ; -#ifdef RC_REPORT_OVERRUN printk (KERN_INFO "rc%d: port %d: Total %ld overruns were detected.\n" ,board_No (bp),port_No (port), port->overrun);
@@ -840,11 +832,6 @@ static void rc_shutdown_port(struct tty_struct *tty, }#endif tty_port_free_xmit_buf (&port->port); -if (C_HUPCL (tty)) { -/* Drop DTR */ - bp->DTR |= (1u <<port_No (port)); -rc_out (bp,RC_DTR , bp->DTR); - }/* Select port */ rc_out (bp,CD180_CAR ,port_No (port));
@@ -856,7 +843,6 @@ static void rc_shutdown_port(struct tty_struct *tty,rc_out (bp,CD180_IER , port->IER);set_bit (TTY_IO_ERROR , &tty->flags); - port->port.flags &= ~ASYNC_INITIALIZED ;if (--bp->count <0 ) { printk(KERN_INFO "rc%d: rc_shutdown_port: "
@@ -889,6 +875,20 @@ static int carrier_raised(struct tty_port *port)return CD ; } +static void dtr_rts (struct tty_port *port,int onoff) +{ + struct riscom_port *p = container_of(port, struct riscom_port, port); +struct riscom_board *bp =port_Board (p); +unsigned long flags; + +spin_lock_irqsave (&riscom_lock, flags); + bp->DTR &= ~(1u <<port_No (p)); +if (onoff ==0 ) + bp->DTR |= (1u <<port_No (p)); +rc_out (bp,RC_DTR , bp->DTR); +spin_unlock_irqrestore (&riscom_lock, flags); +} +static int rc_open (struct tty_struct *tty,struct file *filp) {int board;
@@ -909,14 +909,7 @@ static int rc_open(struct tty_struct *tty, struct file *filp)if (error)return error; - port->port.count++; - tty->driver_data = port; -tty_port_tty_set (&port->port, tty); - - error =rc_setup_port (tty, bp, port); -if (error ==0 ) - error =tty_port_block_til_ready (&port->port, tty, filp); -return error; +return tty_port_open (&port->port, tty, filp); }static void rc_flush_buffer (struct tty_struct *tty)
@@ -950,24 +943,23 @@ static void rc_close_port(struct tty_port *port)spin_lock_irqsave (&riscom_lock, flags); rp->IER &= ~IER_RXD ; -if (port->flags &ASYNC_INITIALIZED ) { - rp->IER &= ~IER_TXRDY ; - rp->IER |=IER_TXEMPTY ; -rc_out (bp,CD180_CAR ,port_No (rp)); -rc_out (bp,CD180_IER , rp->IER); -/* -* Before we drop DTR, make sure the UART transmitter -* has completely drained; this is especially -* important if there is a transmit FIFO! -*/ - timeout = jiffies +HZ ; -while (rp->IER &IER_TXEMPTY ) { -spin_unlock_irqrestore (&riscom_lock, flags); -msleep_interruptible (jiffies_to_msecs (rp->timeout)); -spin_lock_irqsave (&riscom_lock, flags); -if (time_after (jiffies, timeout)) -break ; - } + + rp->IER &= ~IER_TXRDY ; + rp->IER |=IER_TXEMPTY ; +rc_out (bp,CD180_CAR ,port_No (rp)); +rc_out (bp,CD180_IER , rp->IER); +/* +* Before we drop DTR, make sure the UART transmitter +* has completely drained; this is especially +* important if there is a transmit FIFO! +*/ + timeout = jiffies +HZ ; +while (rp->IER &IER_TXEMPTY ) { +spin_unlock_irqrestore (&riscom_lock, flags); +msleep_interruptible (jiffies_to_msecs (rp->timeout)); +spin_lock_irqsave (&riscom_lock, flags); +if (time_after (jiffies, timeout)) +break ; }rc_shutdown_port (port->tty, bp, rp);spin_unlock_irqrestore (&riscom_lock, flags);
@@ -1354,7 +1346,6 @@ static void rc_hangup(struct tty_struct *tty)if (rc_paranoia_check (port, tty->name,"rc_hangup" ))return ; -rc_shutdown_port (tty,port_Board (port), port);tty_port_hangup (&port->port); }
@@ -1401,7 +1392,9 @@ static const struct tty_operations riscom_ops = {static const struct tty_port_operations riscom_port_ops = { .carrier_raised = carrier_raised, + .dtr_rts = dtr_rts, .shutdown = rc_close_port, + .activate = rc_activate_port, };
Signature · 1 line
1.6.5.5
PATCH 37/58 tty: tty_port: Add IO_ERROR bit handling
In reply to Greg KHFrom: Alan Cox <[email protected]>
To propogate tty_port_open/close to a few other devices we need to start handling the IO_ERROR flag on the tty. We can do this pretty trivially.
--- drivers/char/tty_port.c | 6 +++++- 1 files changed, 5 insertions(+), 1 deletions(-)
drivers/char/tty_port.c +5 -1
@@ -122,8 +122,10 @@ void tty_port_hangup(struct tty_port *port)spin_lock_irqsave (&port->lock, flags); port->count =0 ; port->flags &= ~ASYNC_NORMAL_ACTIVE ; -if (port->tty) +if (port->tty) { +set_bit (TTY_IO_ERROR , &port->tty->flags);tty_kref_put (port->tty); + } port->tty =NULL ;spin_unlock_irqrestore (&port->lock, flags);wake_up_interruptible (&port->open_wait);
@@ -383,6 +385,7 @@ void tty_port_close(struct tty_port *port, struct tty_struct *tty,if (tty_port_close_start (port, tty, filp) ==0 )return ;tty_port_shutdown (port); +set_bit (TTY_IO_ERROR , &tty->flags);tty_port_close_end (port, tty);tty_port_tty_set (port,NULL ); }
@@ -414,6 +417,7 @@ int tty_port_open(struct tty_port *port, struct tty_struct *tty, } }set_bit (ASYNCB_INITIALIZED , &port->flags); +clear_bit (TTY_IO_ERROR , &tty->flags); }mutex_unlock (&port->mutex);return tty_port_block_til_ready (port, tty, filp);
Signature · 1 line
1.6.5.5
PATCH 38/58 tty: tty_port: Move the IO_ERROR clear
In reply to Greg KHFrom: Alan Cox <[email protected]>
Some devices want to set IO_ERROR in their activate methods so that you can be handed a 'dead' port for operations like setserial. Thus we need to clear the flag before activate so that activate can choose to set the flag and still return 0.
This is fine as the file handle/tty are not accessible to the user yet.
--- drivers/char/tty_port.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/char/tty_port.c +1 -1
@@ -409,6 +409,7 @@ int tty_port_open(struct tty_port *port, struct tty_struct *tty,mutex_lock (&port->mutex);if (!test_bit (ASYNCB_INITIALIZED , &port->flags)) { +clear_bit (TTY_IO_ERROR , &tty->flags);if (port->ops->activate) {int retval = port->ops->activate (port, tty);if (retval) {
@@ -417,7 +418,6 @@ int tty_port_open(struct tty_port *port, struct tty_struct *tty, } }set_bit (ASYNCB_INITIALIZED , &port->flags); -clear_bit (TTY_IO_ERROR , &tty->flags); }mutex_unlock (&port->mutex);return tty_port_block_til_ready (port, tty, filp);
Signature · 1 line
1.6.5.5
PATCH 39/58 tty: stallion: Convert to the tty_port_open/close methods
In reply to Greg KHFrom: Alan Cox <[email protected]>
The driver is already structured this way so just slice and dice
--- drivers/char/stallion.c | 116 ++++++++++++++--------------------------------- 1 files changed, 35 insertions(+), 81 deletions(-)
drivers/char/stallion.c +35 -81
@@ -702,6 +702,24 @@ static struct stlbrd *stl_allocbrd(void)/*****************************************************************************/ +static int stl_activate (struct tty_port *port,struct tty_struct *tty) +{ + struct stlport *portp = container_of(port, struct stlport, port); +if (!portp->tx.buf) { + portp->tx.buf =kmalloc (STL_TXBUFSIZE ,GFP_KERNEL ); +if (!portp->tx.buf) +return -ENOMEM ; + portp->tx.head = portp->tx.buf; + portp->tx.tail = portp->tx.buf; + } +stl_setport (portp, tty->termios); + portp->sigs =stl_getsignals (portp); +stl_setsignals (portp,1 ,1 ); +stl_enablerxtx (portp,1 ,1 ); +stl_startrxtx (portp,1 ,0 ); +return 0 ; +} +static int stl_open (struct tty_struct *tty,struct file *filp) {struct stlport *portp;
@@ -737,32 +755,8 @@ static int stl_open(struct tty_struct *tty, struct file *filp)if (portp ==NULL )return -ENODEV ; port = &portp->port; +return tty_port_open (&portp->port, tty, filp); -/* -* On the first open of the device setup the port hardware, and -* initialize the per port data structure. -*/ -tty_port_tty_set (port, tty); - tty->driver_data = portp; - port->count++; - -if ((port->flags &ASYNC_INITIALIZED ) ==0 ) { -if (!portp->tx.buf) { - portp->tx.buf =kmalloc (STL_TXBUFSIZE ,GFP_KERNEL ); -if (!portp->tx.buf) -return -ENOMEM ; - portp->tx.head = portp->tx.buf; - portp->tx.tail = portp->tx.buf; - } -stl_setport (portp, tty->termios); - portp->sigs =stl_getsignals (portp); -stl_setsignals (portp,1 ,1 ); -stl_enablerxtx (portp,1 ,1 ); -stl_startrxtx (portp,1 ,0 ); -clear_bit (TTY_IO_ERROR , &tty->flags); - port->flags |=ASYNC_INITIALIZED ; - } -return tty_port_block_til_ready (port, tty, filp); }/*****************************************************************************/
@@ -826,38 +820,12 @@ static void stl_waituntilsent(struct tty_struct *tty, int timeout)/*****************************************************************************/ -static void stl_close (struct tty_struct *tty,struct file *filp) +static void stl_shutdown (struct tty_port *port) { -struct stlport *portp; -struct tty_port *port; -unsigned long flags; - -pr_debug ("stl_close(tty=%p,filp=%p)\n" , tty, filp); - - portp = tty->driver_data; -BUG_ON (portp ==NULL ); - - port = &portp->port; - -if (tty_port_close_start (port, tty, filp) ==0 ) -return ; -/* -* May want to wait for any data to drain before closing. The BUSY -* flag keeps track of whether we are still sending or not - it is -* very accurate for the cd1400, not quite so for the sc26198. -* (The sc26198 has no "end-of-data" interrupt only empty FIFO) -*/ -stl_waituntilsent (tty, (HZ /2 )); - -spin_lock_irqsave (&port->lock, flags); - portp->port.flags &= ~ASYNC_INITIALIZED ; -spin_unlock_irqrestore (&port->lock, flags); - + struct stlport *portp = container_of(port, struct stlport, port);stl_disableintrs (portp); -if (tty->termios->c_cflag &HUPCL ) -stl_setsignals (portp,0 ,0 );stl_enablerxtx (portp,0 ,0 ); -stl_flushbuffer (tty); +stl_flush (portp); portp->istate =0 ;if (portp->tx.buf !=NULL ) {kfree (portp->tx.buf);
@@ -865,9 +833,16 @@ static void stl_close(struct tty_struct *tty, struct file *filp) portp->tx.head =NULL ; portp->tx.tail =NULL ; } +} + +static void stl_close (struct tty_struct *tty,struct file *filp) +{ +struct stlport *portp; +pr_debug ("stl_close(tty=%p,filp=%p)\n" , tty, filp); -tty_port_close_end (port, tty); -tty_port_tty_set (port,NULL ); + portp = tty->driver_data; +BUG_ON (portp ==NULL ); +tty_port_close (&portp->port, tty, filp); }/*****************************************************************************/
@@ -1314,35 +1289,12 @@ static void stl_stop(struct tty_struct *tty)static void stl_hangup (struct tty_struct *tty) { -struct stlport *portp; -struct tty_port *port; -unsigned long flags; - +struct stlport *portp = tty->driver_data;pr_debug ("stl_hangup(tty=%p)\n" , tty); - portp = tty->driver_data;if (portp ==NULL )return ; - port = &portp->port; - -spin_lock_irqsave (&port->lock, flags); - port->flags &= ~ASYNC_INITIALIZED ; -spin_unlock_irqrestore (&port->lock, flags); - -stl_disableintrs (portp); -if (tty->termios->c_cflag &HUPCL ) -stl_setsignals (portp,0 ,0 ); -stl_enablerxtx (portp,0 ,0 ); -stl_flushbuffer (tty); - portp->istate =0 ; -set_bit (TTY_IO_ERROR , &tty->flags); -if (portp->tx.buf !=NULL ) { -kfree (portp->tx.buf); - portp->tx.buf =NULL ; - portp->tx.head =NULL ; - portp->tx.tail =NULL ; - } -tty_port_hangup (port); +tty_port_hangup (&portp->port); }/*****************************************************************************/
@@ -2550,6 +2502,8 @@ static const struct tty_operations stl_ops = {static const struct tty_port_operations stl_port_ops = { .carrier_raised = stl_carrier_raised, .dtr_rts = stl_dtr_rts, + .activate = stl_activate, + .shutdown = stl_shutdown, };/*****************************************************************************/
Signature · 1 line
1.6.5.5
PATCH 40/58 tty: istallion: tty port open/close methods
In reply to Greg KHFrom: Alan Cox <[email protected]>
Slice/dice/repeat as with the stallion driver this is just code shuffling and removal
--- drivers/char/istallion.c | 177 ++++++++++++++++------------------------------ 1 files changed, 60 insertions(+), 117 deletions(-)
drivers/char/istallion.c +60 -117
@@ -213,7 +213,6 @@ static int stli_shared;* with the slave. Most of them need to be updated atomically, so always * use the bit setting operations (unless protected by cli/sti). */ -#define ST_INITIALIZING 1#define ST_OPENING 2#define ST_CLOSING 3#define ST_CMDING 4
@@ -783,13 +782,32 @@ static int stli_parsebrd(struct stlconf *confp, char **argp)/*****************************************************************************/ +/* +* On the first open of the device setup the port hardware, and +* initialize the per port data structure. Since initializing the port +* requires several commands to the board we will need to wait for any +* other open that is already initializing the port. +* +* Locking: protected by the port mutex. +*/ + +static int stli_activate (struct tty_port *port,struct tty_struct *tty) +{ + struct stliport *portp = container_of(port, struct stliport, port); +struct stlibrd *brdp = stli_brds[portp->brdnr]; +int rc; + +if ((rc =stli_initopen (tty, brdp, portp)) >=0 ) +clear_bit (TTY_IO_ERROR , &tty->flags); +wake_up_interruptible (&portp->raw_wait); +return rc; +} +static int stli_open (struct tty_struct *tty,struct file *filp) {struct stlibrd *brdp;struct stliport *portp; -struct tty_port *port;unsigned int minordev, brdnr, portnr; -int rc; minordev = tty->index; brdnr =MINOR2BRD (minordev);
@@ -809,95 +827,56 @@ static int stli_open(struct tty_struct *tty, struct file *filp)return -ENODEV ;if (portp->devnr <1 )return -ENODEV ; - port = &portp->port; - -/* -* On the first open of the device setup the port hardware, and -* initialize the per port data structure. Since initializing the port -* requires several commands to the board we will need to wait for any -* other open that is already initializing the port. -* -* Review - locking -*/ -tty_port_tty_set (port, tty); - tty->driver_data = portp; - port->count++; - -wait_event_interruptible (portp->raw_wait, - !test_bit (ST_INITIALIZING , &portp->state)); -if (signal_pending (current)) -return -ERESTARTSYS ; - -if ((portp->port.flags &ASYNC_INITIALIZED ) ==0 ) { -set_bit (ST_INITIALIZING , &portp->state); -if ((rc =stli_initopen (tty, brdp, portp)) >=0 ) { -/* Locking */ - port->flags |=ASYNC_INITIALIZED ; -clear_bit (TTY_IO_ERROR , &tty->flags); - } -clear_bit (ST_INITIALIZING , &portp->state); -wake_up_interruptible (&portp->raw_wait); -if (rc <0 ) -return rc; - } -return tty_port_block_til_ready (&portp->port, tty, filp); +return tty_port_open (&portp->port, tty, filp); } +/*****************************************************************************/ -static void stli_close (struct tty_struct *tty,struct file *filp) +static void stli_shutdown (struct tty_port *port) {struct stlibrd *brdp; -struct stliport *portp; -struct tty_port *port; +unsigned long ftype;unsigned long flags; + struct stliport *portp = container_of(port, struct stliport, port); - portp = tty->driver_data; -if (portp ==NULL ) +if (portp->brdnr >= stli_nrbrds)return ; - port = &portp->port; - -if (tty_port_close_start (port, tty, filp) ==0 ) + brdp = stli_brds[portp->brdnr]; +if (brdp ==NULL )return ; -/* -* May want to wait for data to drain before closing. The BUSY flag -* keeps track of whether we are still transmitting or not. It is -* updated by messages from the slave - indicating when all chars -* really have drained. -*/ -spin_lock_irqsave (&stli_lock, flags); -if (tty == stli_txcooktty) -stli_flushchars (tty); -spin_unlock_irqrestore (&stli_lock, flags); - -/* We end up doing this twice for the moment. This needs looking at -eventually. Note we still use portp->closing_wait as a result */ -if (portp->closing_wait !=ASYNC_CLOSING_WAIT_NONE ) -tty_wait_until_sent (tty, portp->closing_wait); +/* +* May want to wait for data to drain before closing. The BUSY +* flag keeps track of whether we are still transmitting or not. +* It is updated by messages from the slave - indicating when all +* chars really have drained. +*/ -/* FIXME: port locking here needs attending to */ - port->flags &= ~ASYNC_INITIALIZED ; +if (!test_bit (ST_CLOSING , &portp->state)) +stli_rawclose (brdp, portp,0 ,0 ); - brdp = stli_brds[portp->brdnr]; -stli_rawclose (brdp, portp,0 ,0 ); -if (tty->termios->c_cflag &HUPCL ) { -stli_mkasysigs (&portp->asig,0 ,0 ); -if (test_bit (ST_CMDING , &portp->state)) -set_bit (ST_DOSIGS , &portp->state); -else -stli_sendcmd (brdp, portp,A_SETSIGNALS , &portp->asig, -sizeof (asysigs_t),0 ); - } +spin_lock_irqsave (&stli_lock, flags);clear_bit (ST_TXBUSY , &portp->state);clear_bit (ST_RXSTOP , &portp->state); -set_bit (TTY_IO_ERROR , &tty->flags); -tty_ldisc_flush (tty); -set_bit (ST_DOFLUSHRX , &portp->state); -stli_flushbuffer (tty); +spin_unlock_irqrestore (&stli_lock, flags); -tty_port_close_end (port, tty); -tty_port_tty_set (port,NULL ); + ftype =FLUSHTX |FLUSHRX ; +stli_cmdwait (brdp, portp,A_FLUSH , &ftype,sizeof (u32),0 ); +} + +static void stli_close (struct tty_struct *tty,struct file *filp) +{ +struct stliport *portp = tty->driver_data; +unsigned long flags; +if (portp ==NULL ) +return ; +spin_lock_irqsave (&stli_lock, flags); +/* Flush any internal buffering out first */ +if (tty == stli_txcooktty) +stli_flushchars (tty); +spin_unlock_irqrestore (&stli_lock, flags); +tty_port_close (&portp->port, tty, filp); }/*****************************************************************************/
@@ -1724,6 +1703,7 @@ static void stli_start(struct tty_struct *tty)/*****************************************************************************/ +/* * Hangup this port. This is pretty much like closing the port, only * a little more brutal. No waiting for data to drain. Shutdown the
@@ -1733,47 +1713,8 @@ static void stli_start(struct tty_struct *tty)static void stli_hangup (struct tty_struct *tty) { -struct stliport *portp; -struct stlibrd *brdp; -struct tty_port *port; -unsigned long flags; - - portp = tty->driver_data; -if (portp ==NULL ) -return ; -if (portp->brdnr >= stli_nrbrds) -return ; - brdp = stli_brds[portp->brdnr]; -if (brdp ==NULL ) -return ; - port = &portp->port; - -spin_lock_irqsave (&port->lock, flags); - port->flags &= ~ASYNC_INITIALIZED ; -spin_unlock_irqrestore (&port->lock, flags); - -if (!test_bit (ST_CLOSING , &portp->state)) -stli_rawclose (brdp, portp,0 ,0 ); - -spin_lock_irqsave (&stli_lock, flags); -if (tty->termios->c_cflag &HUPCL ) { -stli_mkasysigs (&portp->asig,0 ,0 ); -if (test_bit (ST_CMDING , &portp->state)) { -set_bit (ST_DOSIGS , &portp->state); -set_bit (ST_DOFLUSHTX , &portp->state); -set_bit (ST_DOFLUSHRX , &portp->state); - }else { -stli_sendcmd (brdp, portp,A_SETSIGNALSF , - &portp->asig,sizeof (asysigs_t),0 ); - } - } - -clear_bit (ST_TXBUSY , &portp->state); -clear_bit (ST_RXSTOP , &portp->state); -set_bit (TTY_IO_ERROR , &tty->flags); -spin_unlock_irqrestore (&stli_lock, flags); - -tty_port_hangup (port); +struct stliport *portp = tty->driver_data; +tty_port_hangup (&portp->port); }/*****************************************************************************/
@@ -4420,6 +4361,8 @@ static const struct tty_operations stli_ops = {static const struct tty_port_operations stli_port_ops = { .carrier_raised = stli_carrier_raised, .dtr_rts = stli_dtr_rts, + .activate = stli_activate, + .shutdown = stli_shutdown, };/*****************************************************************************/
Signature · 1 line
1.6.5.5
PATCH 41/58 tty: tty_port: Add a kref object to the tty port
In reply to Greg KHFrom: Alan Cox <[email protected]>
Users of tty port need a way to refcount ports when hotplugging is involved.
--- drivers/char/tty_port.c | 18 ++++++++++++++++++ include/linux/tty.h | 12 ++++++++++++ 2 files changed, 30 insertions(+), 0 deletions(-)
drivers/char/tty_port.c +18 -0
@@ -29,6 +29,7 @@ void tty_port_init(struct tty_port *port)spin_lock_init (&port->lock); port->close_delay = (50 *HZ ) /100 ; port->closing_wait = (3000 *HZ ) /100 ; +kref_init (&port->kref); }EXPORT_SYMBOL (tty_port_init);
@@ -56,6 +57,23 @@ void tty_port_free_xmit_buf(struct tty_port *port) }EXPORT_SYMBOL (tty_port_free_xmit_buf); +static void tty_port_destructor (struct kref *kref) +{ + struct tty_port *port = container_of(kref, struct tty_port, kref); +if (port->xmit_buf) +free_page ((unsigned long )port->xmit_buf); +if (port->ops->destruct) + port->ops->destruct (port); +else +kfree (port); +} + +void tty_port_put (struct tty_port *port) +{ +if (port) +kref_put (&port->kref, tty_port_destructor); +} +EXPORT_SYMBOL (tty_port_put);/** * tty_port_tty_get - get a tty reference
include/linux/tty.h +12 -0
@@ -199,6 +199,8 @@ struct tty_port_operations {/* FIXME: long term getting the tty argument *out* of this would be good for consoles */ int (*activate)(struct tty_port *port,struct tty_struct *tty); +/* Called on the final put of a port */ +void (*destruct)(struct tty_port *port); };struct tty_port {
@@ -219,6 +221,7 @@ struct tty_port {int drain_delay;/* Set to zero if no pure time based drain is needed else set to size of fifo */ +struct kref kref;/* Ref counter */ };/*
@@ -461,6 +464,15 @@ extern int tty_write_lock(struct tty_struct *tty, int ndelay);extern void tty_port_init (struct tty_port *port);extern int tty_port_alloc_xmit_buf (struct tty_port *port);extern void tty_port_free_xmit_buf (struct tty_port *port); +extern void tty_port_put (struct tty_port *port); + +extern inline struct tty_port *tty_port_get (struct tty_port *port) +{ +if (port) +kref_get (&port->kref); +return port; +} +extern struct tty_struct *tty_port_tty_get (struct tty_port *port);extern void tty_port_tty_set (struct tty_port *port,struct tty_struct *tty);extern int tty_port_carrier_raised (struct tty_port *port);
Signature · 1 line
1.6.5.5
PATCH 42/58 tty: isicom: switch to the new tty_port_open helper
In reply to Greg KHFrom: Alan Cox <[email protected]>
Trivial conversion in this case so might as well do it while testing the port_open design is right
--- drivers/char/isicom.c | 88 ++++++++++++------------------------------------- 1 files changed, 21 insertions(+), 67 deletions(-)
drivers/char/isicom.c +21 -67
@@ -804,24 +804,21 @@ static inline void isicom_setup_board(struct isi_board *bp) bp->status |=BOARD_ACTIVE ;for (channel =0 ; channel < bp->port_count; channel++, port++)drop_dtr_rts (port); + bp->count++;spin_unlock_irqrestore (&bp->card_lock, flags); } -static int isicom_setup_port (struct tty_struct *tty) +static int isicom_activate (struct tty_port *tport,struct tty_struct *tty) { -struct isi_port *port = tty->driver_data; + struct isi_port *port = container_of(tport, struct isi_port, port);struct isi_board *card = port->card;unsigned long flags; -if (port->port.flags &ASYNC_INITIALIZED ) -return 0 ; -if (tty_port_alloc_xmit_buf (&port->port) <0 ) +if (tty_port_alloc_xmit_buf (tport) <0 )return -ENOMEM ;spin_lock_irqsave (&card->card_lock, flags); -clear_bit (TTY_IO_ERROR , &tty->flags); -if (port->port.count ==1 ) - card->count++; +isicom_setup_board (card); port->xmit_cnt = port->xmit_head = port->xmit_tail =0 ;
@@ -832,9 +829,7 @@ static int isicom_setup_port(struct tty_struct *tty)outw (((ISICOM_KILLTX |ISICOM_KILLRX ) <<8 ) |0x06 , card->base);InterruptTheCard (card->base); } -isicom_config_port (tty); - port->port.flags |=ASYNC_INITIALIZED ;spin_unlock_irqrestore (&card->card_lock, flags);return 0 ;
@@ -871,31 +866,20 @@ static struct tty_port *isicom_find_port(struct tty_struct *tty)return &port->port; } - +static int isicom_open (struct tty_struct *tty,struct file *filp) {struct isi_port *port;struct isi_board *card;struct tty_port *tport; -int error =0 ; tport =isicom_find_port (tty);if (tport ==NULL )return -ENODEV ; port = container_of(tport, struct isi_port, port); card = &isi_card[BOARD (tty->index)]; -isicom_setup_board (card); -/* FIXME: locking on port.count etc */ - port->port.count++; - tty->driver_data = port; -tty_port_tty_set (&port->port, tty); -/* FIXME: Locking on Initialized flag */ -if (!test_bit (ASYNCB_INITIALIZED , &tport->flags)) - error =isicom_setup_port (tty); -if (error ==0 ) - error =tty_port_block_til_ready (&port->port, tty, filp); -return error; +return tty_port_open (tport, tty, filp); }/* close et all */
@@ -914,40 +898,21 @@ static void isicom_shutdown_port(struct isi_port *port) tty =tty_port_tty_get (&port->port); -if (!(port->port.flags &ASYNC_INITIALIZED )) { -tty_kref_put (tty); -return ; - } -tty_port_free_xmit_buf (&port->port); - port->port.flags &= ~ASYNC_INITIALIZED ; -/* 3rd October 2000 : Vinayak P Risbud */ -tty_port_tty_set (&port->port,NULL ); - -/*Fix done by Anil .S on 30-04-2001 -remote login through isi port has dtr toggle problem -due to which the carrier drops before the password prompt -appears on the remote end. Now we drop the dtr only if the -HUPCL(Hangup on close) flag is set for the tty*/ - -if (C_HUPCL (tty)) -/* drop dtr on this port */ -drop_dtr (port); - -/* any other port uninits */ -if (tty) -set_bit (TTY_IO_ERROR , &tty->flags); -if (--card->count <0 ) {pr_dbg ("isicom_shutdown_port: bad board(0x%lx) count %d.\n" , card->base, card->count); card->count =0 ; } -/* last port was closed, shutdown that boad too */ -if (C_HUPCL (tty)) { -if (!card->count) -isicom_shutdown_board (card); +/* last port was closed, shutdown that board too */ +if (tty &&C_HUPCL (tty)) { +/* FIXME: this logic is bogus - it's the old logic that was +bogus before but it still wants fixing */ +if (!card->count) { +if (card->status &BOARD_ACTIVE ) + card->status &= ~BOARD_ACTIVE ; + } }tty_kref_put (tty); }
@@ -968,7 +933,7 @@ static void isicom_flush_buffer(struct tty_struct *tty)tty_wakeup (tty); } -static void isicom_close_port (struct tty_port *port) +static void isicom_shutdown (struct tty_port *port) { struct isi_port *ip = container_of(port, struct isi_port, port);struct isi_board *card = ip->card;
@@ -977,10 +942,8 @@ static void isicom_close_port(struct tty_port *port)/* indicate to the card that no more data can be received on this port */ spin_lock_irqsave (&card->card_lock, flags); -if (port->flags &ASYNC_INITIALIZED ) { - card->port_status &= ~(1 << ip->channel); -outw (card->port_status, card->base +0x02 ); - } + card->port_status &= ~(1 << ip->channel); +outw (card->port_status, card->base +0x02 );isicom_shutdown_port (ip);spin_unlock_irqrestore (&card->card_lock, flags); }
@@ -991,12 +954,7 @@ static void isicom_close(struct tty_struct *tty, struct file *filp)struct tty_port *port = &ip->port;if (isicom_paranoia_check (ip, tty->name,"isicom_close" ))return ; - -if (tty_port_close_start (port, tty, filp) ==0 ) -return ; -isicom_close_port (port); -isicom_flush_buffer (tty); -tty_port_close_end (port, tty); +tty_port_close (port, tty, filp); }/* write et all */
@@ -1326,15 +1284,9 @@ static void isicom_start(struct tty_struct *tty)static void isicom_hangup (struct tty_struct *tty) {struct isi_port *port = tty->driver_data; -unsigned long flags;if (isicom_paranoia_check (port, tty->name,"isicom_hangup" ))return ; - -spin_lock_irqsave (&port->card->card_lock, flags); -isicom_shutdown_port (port); -spin_unlock_irqrestore (&port->card->card_lock, flags); -tty_port_hangup (&port->port); }
@@ -1367,6 +1319,8 @@ static const struct tty_operations isicom_ops = {static const struct tty_port_operations isicom_port_ops = { .carrier_raised = isicom_carrier_raised, .dtr_rts = isicom_dtr_rts, + .activate = isicom_activate, + .shutdown = isicom_shutdown, }; static int __devinit reset_card(struct pci_dev *pdev,
Signature · 1 line
1.6.5.5
PATCH 43/58 tty: isicom: sort out the board init logic
In reply to Greg KHFrom: Alan Cox <[email protected]>
Split this into two flags - INIT meaning the board is set up and ACTIVE meaning the board has ports open. Remove the broken HUPCL casing and push the counts somewhere sensible.
--- drivers/char/isicom.c | 41 +++++++++++------------------------------ include/linux/isicom.h | 1 + 2 files changed, 12 insertions(+), 30 deletions(-)
drivers/char/isicom.c +11 -30
@@ -793,21 +793,19 @@ static inline void isicom_setup_board(struct isi_board *bp) {int channel;struct isi_port *port; -unsigned long flags; -spin_lock_irqsave (&bp->card_lock, flags); -if (bp->status &BOARD_ACTIVE ) { -spin_unlock_irqrestore (&bp->card_lock, flags); -return ; - } - port = bp->ports; - bp->status |=BOARD_ACTIVE ; -for (channel =0 ; channel < bp->port_count; channel++, port++) -drop_dtr_rts (port); bp->count++; -spin_unlock_irqrestore (&bp->card_lock, flags); +if (!(bp->status &BOARD_INIT )) { + port = bp->ports; +for (channel =0 ; channel < bp->port_count; channel++, port++) +drop_dtr_rts (port); + } + bp->status |=BOARD_ACTIVE |BOARD_INIT ; } +/* Activate and thus setup board are protected from races against shutdown +by the tty_port mutex */ +static int isicom_activate (struct tty_port *tport,struct tty_struct *tty) { struct isi_port *port = container_of(tport, struct isi_port, port);
@@ -884,19 +882,10 @@ static int isicom_open(struct tty_struct *tty, struct file *filp)/* close et all */ -static inline void isicom_shutdown_board (struct isi_board *bp) -{ -if (bp->status &BOARD_ACTIVE ) - bp->status &= ~BOARD_ACTIVE ; -} -/* card->lock HAS to be held */ static void isicom_shutdown_port (struct isi_port *port) {struct isi_board *card = port->card; -struct tty_struct *tty; - - tty =tty_port_tty_get (&port->port);tty_port_free_xmit_buf (&port->port);if (--card->count <0 ) {
@@ -904,17 +893,9 @@ static void isicom_shutdown_port(struct isi_port *port) card->base, card->count); card->count =0 ; } -/* last port was closed, shutdown that board too */ -if (tty &&C_HUPCL (tty)) { -/* FIXME: this logic is bogus - it's the old logic that was -bogus before but it still wants fixing */ -if (!card->count) { -if (card->status &BOARD_ACTIVE ) - card->status &= ~BOARD_ACTIVE ; - } - } -tty_kref_put (tty); +if (!card->count) + card->status &=BOARD_ACTIVE ; }static void isicom_flush_buffer (struct tty_struct *tty)
include/linux/isicom.h +1 -0
@@ -67,6 +67,7 @@#define FIRMWARE_LOADED 0x0001#define BOARD_ACTIVE 0x0002 +#define BOARD_INIT 0x0004/* isi_port status bitmap */
Signature · 1 line
1.6.5.5
PATCH 44/58 tty: mxser: use the tty_port_open method
In reply to Greg KHFrom: Alan Cox <[email protected]>
At first this looks a fairly trivial conversion but we can't quite push everything into the right format yet. The open side is easy but care is needed over the setserial methods. Fix up the locking now that we've adopted the port->mutex locking rule for the initialization.
--- drivers/char/mxser.c | 111 ++++++++++++++++---------------------------------- 1 files changed, 35 insertions(+), 76 deletions(-)
drivers/char/mxser.c +35 -76
@@ -856,9 +856,9 @@ static void mxser_check_modem_status(struct tty_struct *tty, } } -static int mxser_startup (struct tty_struct *tty) +static int mxser_activate (struct tty_port *port,struct tty_struct *tty) { -struct mxser_port *info = tty->driver_data; + struct mxser_port *info = container_of(port, struct mxser_port, port);unsigned long page;unsigned long flags;
@@ -868,22 +868,13 @@ static int mxser_startup(struct tty_struct *tty)spin_lock_irqsave (&info->slock, flags); -if (info->port.flags &ASYNC_INITIALIZED ) { -free_page (page); -spin_unlock_irqrestore (&info->slock, flags); -return 0 ; - } -if (!info->ioaddr || !info->type) {set_bit (TTY_IO_ERROR , &tty->flags);free_page (page);spin_unlock_irqrestore (&info->slock, flags);return 0 ; } -if (info->port.xmit_buf) -free_page (page); -else - info->port.xmit_buf = (unsigned char *) page; + info->port.xmit_buf = (unsigned char *) page;/* * Clear the FIFO buffers and disable them
@@ -951,24 +942,19 @@ static int mxser_startup(struct tty_struct *tty)* and set the speed of the serial port */ mxser_change_speed (tty,NULL ); - info->port.flags |=ASYNC_INITIALIZED ;spin_unlock_irqrestore (&info->slock, flags);return 0 ; }/* -* This routine will shutdown a serial port; interrupts maybe disabled, and -* DTR is dropped if the hangup on close termio flag is on. +* This routine will shutdown a serial port */ -static void mxser_shutdown (struct tty_struct *tty) +static void mxser_shutdown_port (struct tty_port *port) { -struct mxser_port *info = tty->driver_data; + struct mxser_port *info = container_of(port, struct mxser_port, port);unsigned long flags; -if (!(info->port.flags &ASYNC_INITIALIZED )) -return ; -spin_lock_irqsave (&info->slock, flags);/*
@@ -978,7 +964,7 @@ static void mxser_shutdown(struct tty_struct *tty)wake_up_interruptible (&info->port.delta_msr_wait);/* -* Free the IRQ, if necessary +* Free the xmit buffer, if necessary */ if (info->port.xmit_buf) {free_page ((unsigned long ) info->port.xmit_buf);
@@ -988,10 +974,6 @@ static void mxser_shutdown(struct tty_struct *tty) info->IER =0 ;outb (0x00 , info->ioaddr +UART_IER ); -if (tty->termios->c_cflag &HUPCL ) - info->MCR &= ~(UART_MCR_DTR |UART_MCR_RTS ); -outb (info->MCR, info->ioaddr +UART_MCR ); -/* clear Rx/Tx FIFO's */ if (info->board->chip_flag) outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT |
@@ -1004,9 +986,6 @@ static void mxser_shutdown(struct tty_struct *tty)/* read data port to reset things */ (void )inb (info->ioaddr +UART_RX ); -set_bit (TTY_IO_ERROR , &tty->flags); - - info->port.flags &= ~ASYNC_INITIALIZED ;if (info->board->chip_flag)SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL (info->ioaddr);
@@ -1023,8 +1002,7 @@ static void mxser_shutdown(struct tty_struct *tty)static int mxser_open (struct tty_struct *tty,struct file *filp) {struct mxser_port *info; -unsigned long flags; -int retval, line; +int line; line = tty->index;if (line ==MXSER_PORTS )
@@ -1035,23 +1013,7 @@ static int mxser_open(struct tty_struct *tty, struct file *filp)if (!info->ioaddr)return -ENODEV ; - tty->driver_data = info; -tty_port_tty_set (&info->port, tty); -/* -* Start up serial port -*/ -spin_lock_irqsave (&info->port.lock, flags); - info->port.count++; -spin_unlock_irqrestore (&info->port.lock, flags); - retval =mxser_startup (tty); -if (retval) -return retval; - - retval =tty_port_block_til_ready (&info->port, tty, filp); -if (retval) -return retval; - -return 0 ; +return tty_port_open (&info->port, tty, filp); }static void mxser_flush_buffer (struct tty_struct *tty)
@@ -1075,19 +1037,11 @@ static void mxser_flush_buffer(struct tty_struct *tty) } -static void mxser_close_port (struct tty_struct *tty,struct tty_port *port) +static void mxser_close_port (struct tty_port *port) { struct mxser_port *info = container_of(port, struct mxser_port, port);unsigned long timeout;/* -* Save the termios structure, since this port may have -* separate termios for callout and dialin. -* -* FIXME: Can this go ? -*/ -if (port->flags &ASYNC_NORMAL_ACTIVE ) - info->normal_termios = *tty->termios; -/* * At this point we stop accepting input. To do this, we * disable the receive line status interrupts, and tell the * interrupt driver to stop checking the data ready bit in the
@@ -1097,22 +1051,18 @@ static void mxser_close_port(struct tty_struct *tty, struct tty_port *port)if (info->board->chip_flag) info->IER &= ~MOXA_MUST_RECV_ISR ; -if (port->flags &ASYNC_INITIALIZED ) { -outb (info->IER, info->ioaddr +UART_IER ); -/* -* Before we drop DTR, make sure the UART transmitter -* has completely drained; this is especially -* important if there is a transmit FIFO! -*/ - timeout = jiffies +HZ ; -while (!(inb (info->ioaddr +UART_LSR ) &UART_LSR_TEMT )) { -schedule_timeout_interruptible (5 ); -if (time_after (jiffies, timeout)) -break ; - } +outb (info->IER, info->ioaddr +UART_IER ); +/* +* Before we drop DTR, make sure the UART transmitter +* has completely drained; this is especially +* important if there is a transmit FIFO! +*/ + timeout = jiffies +HZ ; +while (!(inb (info->ioaddr +UART_LSR ) &UART_LSR_TEMT )) { +schedule_timeout_interruptible (5 ); +if (time_after (jiffies, timeout)) +break ; } -mxser_shutdown (tty); - }/*
@@ -1130,8 +1080,12 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)return ;if (tty_port_close_start (port, tty, filp) ==0 )return ; -mxser_close_port (tty, port); +mutex_lock (&port->mutex); +mxser_close_port (port);mxser_flush_buffer (tty); +mxser_shutdown_port (port); +clear_bit (ASYNCB_INITIALIZED , &port->flags); +mutex_unlock (&port->mutex);/* Right now the tty_port set is done outside of the close_end helper as we don't yet have everyone using refcounts */ tty_port_close_end (port, tty);
@@ -1329,9 +1283,13 @@ static int mxser_set_serial_info(struct tty_struct *tty,mxser_change_speed (tty,NULL );spin_unlock_irqrestore (&info->slock, sl_flags); } - }else - retval =mxser_startup (tty); - + }else { +mutex_lock (&info->port.mutex); + retval =mxser_activate (&info->port, tty); +if (retval ==0 ) +set_bit (ASYNCB_INITIALIZED , &info->port.flags); +mutex_unlock (&info->port.mutex); + }return retval; }
@@ -2059,7 +2017,6 @@ static void mxser_hangup(struct tty_struct *tty)struct mxser_port *info = tty->driver_data;mxser_flush_buffer (tty); -mxser_shutdown (tty);tty_port_hangup (&info->port); }
@@ -2363,6 +2320,8 @@ static const struct tty_operations mxser_ops = {struct tty_port_operations mxser_port_ops = { .carrier_raised = mxser_carrier_raised, .dtr_rts = mxser_dtr_rts, + .activate = mxser_activate, + .shutdown = mxser_shutdown_port, };/*
Signature · 1 line
1.6.5.5
PATCH 45/58 tty: mxser: Use the new locking rules to fix setserial properly
In reply to Greg KHFrom: Alan Cox <[email protected]>
Propogate the init/shutdown mutex through the setserial logic. Use the proper locks for the various bits still using the BKL. Kill the BKL in this driver.
Updated to fix the bug noted by Dan Carpenter
--- drivers/char/mxser.c | 145 +++++++++++++++++++++++++++----------------------- 1 files changed, 78 insertions(+), 67 deletions(-)
drivers/char/mxser.c +78 -67
@@ -23,7 +23,6 @@#include <linux/errno.h> #include <linux/signal.h> #include <linux/sched.h> -#include <linux/smp_lock.h> #include <linux/timer.h> #include <linux/interrupt.h> #include <linux/tty.h>
@@ -1229,6 +1228,7 @@ static int mxser_set_serial_info(struct tty_struct *tty, struct serial_struct __user *new_info) {struct mxser_port *info = tty->driver_data; +struct tty_port *port = &info->port;struct serial_struct new_serial;speed_t baud;unsigned long sl_flags;
@@ -1244,7 +1244,7 @@ static int mxser_set_serial_info(struct tty_struct *tty, new_serial.port != info->ioaddr)return -EINVAL ; - flags = info->port.flags &ASYNC_SPD_MASK ; + flags = port->flags &ASYNC_SPD_MASK ;if (!capable (CAP_SYS_ADMIN )) { if ((new_serial.baud_base != info->baud_base) ||
@@ -1258,16 +1258,17 @@ static int mxser_set_serial_info(struct tty_struct *tty,* OK, past this point, all the error checking has been done. * At this point, we start making changes..... */ - info->port.flags = ((info->port.flags & ~ASYNC_FLAGS ) | + port->flags = ((port->flags & ~ASYNC_FLAGS ) | (new_serial.flags &ASYNC_FLAGS )); - info->port.close_delay = new_serial.close_delay *HZ /100 ; - info->port.closing_wait = new_serial.closing_wait *HZ /100 ; - tty->low_latency = (info->port.flags &ASYNC_LOW_LATENCY ) - ?1 :0 ; -if ((info->port.flags &ASYNC_SPD_MASK ) ==ASYNC_SPD_CUST && + port->close_delay = new_serial.close_delay *HZ /100 ; + port->closing_wait = new_serial.closing_wait *HZ /100 ; + tty->low_latency = (port->flags &ASYNC_LOW_LATENCY ) ?1 :0 ; +if ((port->flags &ASYNC_SPD_MASK ) ==ASYNC_SPD_CUST && (new_serial.baud_base != info->baud_base || new_serial.custom_divisor != info->custom_divisor)) { +if (new_serial.custom_divisor ==0 ) +return -EINVAL ; baud = new_serial.baud_base / new_serial.custom_divisor;tty_encode_baud_rate (tty, baud, baud); }
@@ -1277,18 +1278,16 @@ static int mxser_set_serial_info(struct tty_struct *tty,process_txrx_fifo (info); -if (info->port.flags &ASYNC_INITIALIZED ) { -if (flags != (info->port.flags &ASYNC_SPD_MASK )) { +if (test_bit (ASYNCB_INITIALIZED , &port->flags)) { +if (flags != (port->flags &ASYNC_SPD_MASK )) {spin_lock_irqsave (&info->slock, sl_flags);mxser_change_speed (tty,NULL );spin_unlock_irqrestore (&info->slock, sl_flags); } }else { -mutex_lock (&info->port.mutex); - retval =mxser_activate (&info->port, tty); + retval =mxser_activate (port, tty);if (retval ==0 ) -set_bit (ASYNCB_INITIALIZED , &info->port.flags); -mutex_unlock (&info->port.mutex); +set_bit (ASYNCB_INITIALIZED , &port->flags); }return retval; }
@@ -1478,7 +1477,8 @@ static int __init mxser_read_register(int port, unsigned short *regs)static int mxser_ioctl_special (unsigned int cmd,void __user *argp) { -struct mxser_port *port; +struct mxser_port *ip; +struct tty_port *port;struct tty_struct *tty;int result, status;unsigned int i, j;
@@ -1494,38 +1494,39 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)case MOXA_CHKPORTENABLE : result =0 ; -lock_kernel ();for (i =0 ; i <MXSER_BOARDS ; i++)for (j =0 ; j <MXSER_PORTS_PER_BOARD ; j++)if (mxser_boards[i].ports[j].ioaddr) result |= (1 << i); -unlock_kernel ();return put_user (result, (unsigned long __user *)argp);case MOXA_GETDATACOUNT : -lock_kernel (); +/* The receive side is locked by port->slock but it isn't +clear that an exact snapshot is worth copying here */ if (copy_to_user (argp, &mxvar_log,sizeof (mxvar_log))) ret = -EFAULT ; -unlock_kernel ();return ret;case MOXA_GETMSTATUS : {struct mxser_mstatus ms,__user *msu = argp; -lock_kernel ();for (i =0 ; i <MXSER_BOARDS ; i++)for (j =0 ; j <MXSER_PORTS_PER_BOARD ; j++) { - port = &mxser_boards[i].ports[j]; + ip = &mxser_boards[i].ports[j]; + port = &ip->port;memset (&ms,0 ,sizeof (ms)); -if (!port->ioaddr) +mutex_lock (&port->mutex); +if (!ip->ioaddr) goto copy; - tty =tty_port_tty_get (&port->port); + tty =tty_port_tty_get (port);if (!tty || !tty->termios) - ms.cflag = port->normal_termios.c_cflag; + ms.cflag = ip->normal_termios.c_cflag;else ms.cflag = tty->termios->c_cflag;tty_kref_put (tty); - status =inb (port->ioaddr +UART_MSR ); +spin_lock_irq (&ip->slock); + status =inb (ip->ioaddr +UART_MSR ); +spin_unlock_irq (&ip->slock);if (status &UART_MSR_DCD ) ms.dcd =1 ;if (status &UART_MSR_DSR )
@@ -1533,13 +1534,11 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)if (status &UART_MSR_CTS ) ms.cts =1 ; copy: -if (copy_to_user (msu, &ms,sizeof (ms))) { -unlock_kernel (); +mutex_unlock (&port->mutex); +if (copy_to_user (msu, &ms,sizeof (ms)))return -EFAULT ; - } msu++; } -unlock_kernel ();return 0 ; }case MOXA_ASPP_MON_EXT : {
@@ -1551,41 +1550,48 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)if (!me)return -ENOMEM ; -lock_kernel ();for (i =0 , p =0 ; i <MXSER_BOARDS ; i++) {for (j =0 ; j <MXSER_PORTS_PER_BOARD ; j++, p++) {if (p >=ARRAY_SIZE (me->rx_cnt)) { i =MXSER_BOARDS ;break ; } - port = &mxser_boards[i].ports[j]; -if (!port->ioaddr) + ip = &mxser_boards[i].ports[j]; + port = &ip->port; + +mutex_lock (&port->mutex); +if (!ip->ioaddr) { +mutex_unlock (&port->mutex);continue ; + } - status =mxser_get_msr (port->ioaddr,0 , p); +spin_lock_irq (&ip->slock); + status =mxser_get_msr (ip->ioaddr,0 , p);if (status &UART_MSR_TERI ) - port->icount.rng++; + ip->icount.rng++;if (status &UART_MSR_DDSR ) - port->icount.dsr++; + ip->icount.dsr++;if (status &UART_MSR_DDCD ) - port->icount.dcd++; + ip->icount.dcd++;if (status &UART_MSR_DCTS ) - port->icount.cts++; + ip->icount.cts++; - port->mon_data.modem_status = status; - me->rx_cnt[p] = port->mon_data.rxcnt; - me->tx_cnt[p] = port->mon_data.txcnt; - me->up_rxcnt[p] = port->mon_data.up_rxcnt; - me->up_txcnt[p] = port->mon_data.up_txcnt; + ip->mon_data.modem_status = status; + me->rx_cnt[p] = ip->mon_data.rxcnt; + me->tx_cnt[p] = ip->mon_data.txcnt; + me->up_rxcnt[p] = ip->mon_data.up_rxcnt; + me->up_txcnt[p] = ip->mon_data.up_txcnt; me->modem_status[p] = - port->mon_data.modem_status; - tty =tty_port_tty_get (&port->port); + ip->mon_data.modem_status; +spin_unlock_irq (&ip->slock); + + tty =tty_port_tty_get (&ip->port);if (!tty || !tty->termios) { - cflag = port->normal_termios.c_cflag; - iflag = port->normal_termios.c_iflag; - me->baudrate[p] =tty_termios_baud_rate (&port->normal_termios); + cflag = ip->normal_termios.c_cflag; + iflag = ip->normal_termios.c_iflag; + me->baudrate[p] =tty_termios_baud_rate (&ip->normal_termios); }else { cflag = tty->termios->c_cflag; iflag = tty->termios->c_iflag;
@@ -1604,16 +1610,15 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)if (iflag & (IXON |IXOFF )) me->flowctrl[p] |=0x0C ; -if (port->type ==PORT_16550A ) +if (ip->type ==PORT_16550A ) me->fifo[p] =1 ; - opmode =inb (port->opmode_ioaddr) >> - ((p %4 ) *2 ); + opmode =inb (ip->opmode_ioaddr)>>((p %4 ) *2 ); opmode &=OP_MODE_MASK ; me->iftype[p] = opmode; +mutex_unlock (&port->mutex); } } -unlock_kernel ();if (copy_to_user (argp, me,sizeof (*me))) ret = -EFAULT ;kfree (me);
@@ -1650,6 +1655,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) {struct mxser_port *info = tty->driver_data; +struct tty_port *port = &info->port;struct async_icount cnow;unsigned long flags;void __user *argp = (void __user *)arg;
@@ -1674,20 +1680,20 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, opmode !=RS422_MODE && opmode != RS485_4WIRE_MODE) return -EFAULT; -lock_kernel (); mask = ModeMask[p]; shiftbit = p *2 ; +spin_lock_irq (&info->slock); val =inb (info->opmode_ioaddr); val &= mask; val |= (opmode << shiftbit);outb (val, info->opmode_ioaddr); -unlock_kernel (); +spin_unlock_irq (&info->slock); }else { -lock_kernel (); shiftbit = p *2 ; +spin_lock_irq (&info->slock); opmode =inb (info->opmode_ioaddr) >> shiftbit; +spin_unlock_irq (&info->slock); opmode &=OP_MODE_MASK ; -unlock_kernel ();if (put_user (opmode, (int __user *)argp))return -EFAULT ; }
@@ -1700,14 +1706,14 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,switch (cmd) {case TIOCGSERIAL : -lock_kernel (); +mutex_lock (&port->mutex); retval =mxser_get_serial_info (tty, argp); -unlock_kernel (); +mutex_unlock (&port->mutex);return retval;case TIOCSSERIAL : -lock_kernel (); +mutex_lock (&port->mutex); retval =mxser_set_serial_info (tty, argp); -unlock_kernel (); +mutex_unlock (&port->mutex);return retval;case TIOCSERGETLSR :/* Get line status register */ return mxser_get_lsr_info (info, argp);
@@ -1753,31 +1759,33 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,case MOXA_HighSpeedOn:return put_user (info->baud_base !=115200 ?1 :0 , (int __user *)argp);case MOXA_SDS_RSTICOUNTER : -lock_kernel (); +spin_lock_irq (&info->slock); info->mon_data.rxcnt =0 ; info->mon_data.txcnt =0 ; -unlock_kernel (); +spin_unlock_irq (&info->slock);return 0 ;case MOXA_ASPP_OQUEUE :{int len, lsr; -lock_kernel (); len =mxser_chars_in_buffer (tty); +spin_lock (&info->slock); lsr =inb (info->ioaddr +UART_LSR ) &UART_LSR_THRE ; +spin_unlock_irq (&info->slock); len += (lsr ?0 :1 ); -unlock_kernel ();return put_user (len, (int __user *)argp); }case MOXA_ASPP_MON : {int mcr, status; -lock_kernel (); +spin_lock (&info->slock); status =mxser_get_msr (info->ioaddr,1 , tty->index);mxser_check_modem_status (tty, info, status); mcr =inb (info->ioaddr +UART_MCR ); +spin_unlock (&info->slock); +if (mcr &MOXA_MUST_MCR_XON_FLAG ) info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD ;else
@@ -1792,7 +1800,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, info->mon_data.hold_reason |=NPPI_NOTIFY_CTSHOLD ; else info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD; -unlock_kernel (); +if (copy_to_user (argp, &info->mon_data,sizeof (struct mxser_mon )))return -EFAULT ;
@@ -1951,6 +1959,7 @@ static void mxser_wait_until_sent(struct tty_struct *tty, int timeout) {struct mxser_port *info = tty->driver_data;unsigned long orig_jiffies, char_time; +unsigned long flags;int lsr;if (info->type ==PORT_UNKNOWN )
@@ -1990,19 +1999,21 @@ static void mxser_wait_until_sent(struct tty_struct *tty, int timeout) timeout, char_time);printk ("jiff=%lu..." , jiffies);#endif -lock_kernel (); +spin_lock_irqsave (&info->slock, flags);while (!((lsr =inb (info->ioaddr +UART_LSR )) &UART_LSR_TEMT )) {#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT printk ("lsr = %d (jiff=%lu)..." , lsr, jiffies);#endif +spin_unlock_irqrestore (&info->slock, flags);schedule_timeout_interruptible (char_time); +spin_lock_irqsave (&info->slock, flags);if (signal_pending (current))break ;if (timeout &&time_after (jiffies, orig_jiffies + timeout))break ; } +spin_unlock_irqrestore (&info->slock, flags);set_current_state (TASK_RUNNING ); -unlock_kernel ();#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT printk ("lsr = %d (jiff=%lu)...done\n" , lsr, jiffies);
Signature · 1 line
1.6.5.5
PATCH 46/58 tty: isicom: fix deadlock on shutdown
In reply to Greg KHFrom: Alan Cox <[email protected]>
Alexander Strakh <[email protected]> reported
KERNEL_VERSION: 2.6.31 DESCRIBE:
Driver drivers/char/isicom.c might sleep in atomic context, because it callstty_port_xmit_buf under spin_lock.
./drivers/char/isicom.c:
1307 static void isicom_hangup(struct tty_struct *tty) 1308 {
...
1315 spin_lock_irqsave(&port->card->card_lock, flags);
1316 isicom_shutdown_port(port);
...
Path to might_sleep macro from isicom_hangup:
1. isicom_hangup calls spin_lock_irqsave (drivers/char/isicom.c:1315) and then
calls isicom_shutdown_port.
2. isiscom_shutdown_port calls tty_port_free_xmit_buf at drivers/char/isicom.c:906
3. tty_port_free_xmit_buf calls mutex_lock at drivers/char/tty_port:48
Found by Linux Driver Verification Project.
--- drivers/char/isicom.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/char/isicom.c +1 -1
@@ -887,7 +887,6 @@ static void isicom_shutdown_port(struct isi_port *port) {struct isi_board *card = port->card; -tty_port_free_xmit_buf (&port->port);if (--card->count <0 ) {pr_dbg ("isicom_shutdown_port: bad board(0x%lx) count %d.\n" , card->base, card->count);
@@ -927,6 +926,7 @@ static void isicom_shutdown(struct tty_port *port)outw (card->port_status, card->base +0x02 );isicom_shutdown_port (ip);spin_unlock_irqrestore (&card->card_lock, flags); +tty_port_free_xmit_buf (port); }static void isicom_close (struct tty_struct *tty,struct file *filp)
Signature · 1 line
1.6.5.5
PATCH 47/58 tty: moxa: Use more tty_port ops
In reply to Greg KHFrom: Alan Cox <[email protected]>
Rework a few bits of this into tty_port format
--- drivers/char/moxa.c | 137 ++++++++------------------------------------------- 1 files changed, 21 insertions(+), 116 deletions(-)
drivers/char/moxa.c +21 -116
@@ -206,8 +206,9 @@ static int moxa_tiocmset(struct tty_struct *tty, struct file *file,static void moxa_poll (unsigned long );static void moxa_set_tty_param (struct tty_struct *,struct ktermios *);static void moxa_setup_empty_event (struct tty_struct *); -static void moxa_shut_down (struct tty_struct *); +static void moxa_shutdown (struct tty_port *);static int moxa_carrier_raised (struct tty_port *); +static void moxa_dtr_rts (struct tty_port *,int );/* * moxa board interface functions: */
@@ -409,6 +410,8 @@ static const struct tty_operations moxa_ops = {static const struct tty_port_operations moxa_port_ops = { .carrier_raised = moxa_carrier_raised, + .dtr_rts = moxa_dtr_rts, + .shutdown = moxa_shutdown, };static struct tty_driver *moxaDriver;
@@ -1112,14 +1115,12 @@ static void __exit moxa_exit(void)module_init (moxa_init);module_exit (moxa_exit); -static void moxa_close_port (struct tty_struct *tty) +static void moxa_shutdown (struct tty_port *port) { -struct moxa_port *ch = tty->driver_data; -moxa_shut_down (tty); + struct moxa_port *ch = container_of(port, struct moxa_port, port); +MoxaPortDisable (ch);MoxaPortFlushData (ch,2 ); - ch->port.flags &= ~ASYNC_NORMAL_ACTIVE ; - tty->driver_data =NULL ; -tty_port_tty_set (&ch->port,NULL ); +clear_bit (ASYNCB_NORMAL_ACTIVE , &port->flags); }static int moxa_carrier_raised (struct tty_port *port)
@@ -1133,39 +1134,13 @@ static int moxa_carrier_raised(struct tty_port *port)return dcd; } -static int moxa_block_till_ready (struct tty_struct *tty,struct file *filp, -struct moxa_port *ch) +static void moxa_dtr_rts (struct tty_port *port,int onoff) { -struct tty_port *port = &ch->port; -DEFINE_WAIT (wait); -int retval =0 ; -u8 dcd; - -while (1 ) { -prepare_to_wait (&port->open_wait, &wait,TASK_INTERRUPTIBLE ); -if (tty_hung_up_p (filp)) { -#ifdef SERIAL_DO_RESTART - retval = -ERESTARTSYS ; -#else - retval = -EAGAIN ; -#endif -break ; - } - dcd =tty_port_carrier_raised (port); -if (dcd) -break ; - -if (signal_pending (current)) { - retval = -ERESTARTSYS ; -break ; - } -schedule (); - } -finish_wait (&port->open_wait, &wait); - -return retval; + struct moxa_port *ch = container_of(port, struct moxa_port, port); +MoxaPortLineCtrl (ch, onoff, onoff); } +static int moxa_open (struct tty_struct *tty,struct file *filp) {struct moxa_board_conf *brd;
@@ -1194,6 +1169,7 @@ static int moxa_open(struct tty_struct *tty, struct file *filp) ch->port.count++; tty->driver_data = ch;tty_port_tty_set (&ch->port, tty); +mutex_lock (&ch->port.mutex);if (!(ch->port.flags &ASYNC_INITIALIZED )) { ch->statusflags =0 ;moxa_set_tty_param (tty, tty->termios);
@@ -1202,57 +1178,21 @@ static int moxa_open(struct tty_struct *tty, struct file *filp)MoxaSetFifo (ch, ch->type ==PORT_16550A ); ch->port.flags |=ASYNC_INITIALIZED ; } +mutex_unlock (&ch->port.mutex);mutex_unlock (&moxa_openlock); - retval =0 ; -if (!(filp->f_flags &O_NONBLOCK ) && !C_CLOCAL (tty)) - retval =moxa_block_till_ready (tty, filp, ch); -mutex_lock (&moxa_openlock); -if (retval) { -if (ch->port.count)/* 0 means already hung up... */ -if (--ch->port.count ==0 ) -moxa_close_port (tty); - }else - ch->port.flags |=ASYNC_NORMAL_ACTIVE ; -mutex_unlock (&moxa_openlock); - + retval =tty_port_block_til_ready (&ch->port, tty, filp); +if (retval ==0 ) +set_bit (ASYNCB_NORMAL_ACTIVE , &ch->port.flags);return retval; }static void moxa_close (struct tty_struct *tty,struct file *filp) { -struct moxa_port *ch; -int port; - - port = tty->index; -if (port ==MAX_PORTS ||tty_hung_up_p (filp)) -return ; - -mutex_lock (&moxa_openlock); - ch = tty->driver_data; -if (ch ==NULL ) - goto unlock; -if (tty->count ==1 && ch->port.count !=1 ) { -printk (KERN_WARNING "moxa_close: bad serial port count; " -"tty->count is 1, ch->port.count is %d\n" , ch->port.count); - ch->port.count =1 ; - } -if (--ch->port.count <0 ) { -printk (KERN_WARNING "moxa_close: bad serial port count, " -"device=%s\n" , tty->name); - ch->port.count =0 ; - } -if (ch->port.count) - goto unlock; - +struct moxa_port *ch = tty->driver_data; ch->cflag = tty->termios->c_cflag; -if (ch->port.flags &ASYNC_INITIALIZED ) { -moxa_setup_empty_event (tty); -tty_wait_until_sent (tty,30 *HZ );/* 30 seconds timeout */ - } - -moxa_close_port (tty); -unlock: +mutex_lock (&moxa_openlock); +tty_port_close (&ch->port, tty, filp);mutex_unlock (&moxa_openlock); }
@@ -1300,14 +1240,6 @@ static int moxa_chars_in_buffer(struct tty_struct *tty)struct moxa_port *ch = tty->driver_data;int chars; -/* -* Sigh...I have to check if driver_data is NULL here, because -* if an open() fails, the TTY subsystem eventually calls -* tty_wait_until_sent(), which calls the driver's chars_in_buffer() -* routine. And since the open() failed, we return 0 here. TDJ -*/ -if (ch ==NULL ) -return 0 ;lock_kernel (); chars =MoxaPortTxQueue (ch);if (chars) {
@@ -1436,15 +1368,8 @@ static void moxa_hangup(struct tty_struct *tty)mutex_lock (&moxa_openlock); ch = tty->driver_data; -if (ch ==NULL ) { -mutex_unlock (&moxa_openlock); -return ; - } - ch->port.count =0 ; -moxa_close_port (tty); +tty_port_hangup (&ch->port);mutex_unlock (&moxa_openlock); - -wake_up_interruptible (&ch->port.open_wait); }static void moxa_new_dcdstate (struct moxa_port *p,u8 dcd)
@@ -1597,26 +1522,6 @@ static void moxa_setup_empty_event(struct tty_struct *tty)spin_unlock_bh (&moxa_lock); } -static void moxa_shut_down (struct tty_struct *tty) -{ -struct moxa_port *ch = tty->driver_data; - -if (!(ch->port.flags &ASYNC_INITIALIZED )) -return ; - -MoxaPortDisable (ch); - -/* -* If we're a modem control device and HUPCL is on, drop RTS & DTR. -*/ -if (C_HUPCL (tty)) -MoxaPortLineCtrl (ch,0 ,0 ); - -spin_lock_bh (&moxa_lock); - ch->port.flags &= ~ASYNC_INITIALIZED ; -spin_unlock_bh (&moxa_lock); -} -/***************************************************************************** * Driver level functions: * *****************************************************************************/
Signature · 1 line
1.6.5.5
PATCH 48/58 tty: moxa: rework the locking a bit
In reply to Greg KHFrom: Alan Cox <[email protected]>
Introduce a lock for moxafunc() to protect the cases where were get collisions between two function requests at the same time.
--- drivers/char/moxa.c | 27 ++++++++++++++++++++++----- 1 files changed, 22 insertions(+), 5 deletions(-)
drivers/char/moxa.c +22 -5
@@ -248,9 +248,25 @@ static void moxa_wait_finish(void __iomem *ofsAddr)static void moxafunc (void __iomem *ofsAddr,u16 cmd,u16 arg) { +unsigned long flags; +spin_lock_irqsave (&moxafunc_lock, flags);writew (arg, ofsAddr + FuncArg);writew (cmd, ofsAddr + FuncCode);moxa_wait_finish (ofsAddr); +spin_unlock_irqrestore (&moxafunc_lock, flags); +} + +static int moxafuncret (void __iomem *ofsAddr,u16 cmd,u16 arg) +{ +unsigned long flags; +u16 ret; +spin_lock_irqsave (&moxafunc_lock, flags); +writew (arg, ofsAddr + FuncArg); +writew (cmd, ofsAddr + FuncCode); +moxa_wait_finish (ofsAddr); + ret =readw (ofsAddr + FuncArg); +spin_unlock_irqrestore (&moxafunc_lock, flags); +return ret; }static void moxa_low_water_check (void __iomem *ofsAddr)
@@ -417,6 +433,7 @@ static const struct tty_port_operations moxa_port_ops = {static struct tty_driver *moxaDriver; static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0);static DEFINE_SPINLOCK (moxa_lock); +static DEFINE_SPINLOCK (moxafunc_lock);/* * HW init
@@ -1823,10 +1840,12 @@ static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio, baud =MoxaPortSetBaud (port, baud);if (termio->c_iflag & (IXON |IXOFF |IXANY )) { +spin_lock_irq (&moxafunc_lock);writeb (termio->c_cc[VSTART ], ofsAddr + FuncArg);writeb (termio->c_cc[VSTOP ], ofsAddr + FuncArg1);writeb (FC_SetXonXoff, ofsAddr + FuncCode);moxa_wait_finish (ofsAddr); +spin_unlock_irqrestore (&moxafunc_lock); }return baud;
@@ -1879,12 +1898,10 @@ static int MoxaPortLineStatus(struct moxa_port *port)int val; ofsAddr = port->tableAddr; -if (MOXA_IS_320 (port->board)) { -moxafunc (ofsAddr, FC_LineStatus,0 ); - val =readw (ofsAddr + FuncArg); - }else { +if (MOXA_IS_320 (port->board)) + val =moxafuncret (ofsAddr, FC_LineStatus,0 ); +else val =readw (ofsAddr + FlagStat) >>4 ; - } val &=0x0B ;if (val &8 ) val |=4 ;
Signature · 1 line
1.6.5.5
PATCH 49/58 tty: moxa: Locking clean up
In reply to Greg KHFrom: Alan Cox <[email protected]>
- The open lock is needed to fix up the case of a board reset occuring during tty open but too early for a sane hangup response.
- The lock can however got for other cases
- Use the port mutex for get/setserial
- Fix up the confused lack of locking on the THROTTLE and other bits in the private flags. Just use set/test/clear bit and it covers the cases we need
--- drivers/char/moxa.c | 58 ++++++++++++++++++++++----------------------------- 1 files changed, 25 insertions(+), 33 deletions(-)
drivers/char/moxa.c +25 -33
@@ -151,10 +151,10 @@ struct mon_str { };/* statusflags */ -#define TXSTOPPED 0x1 -#define LOWWAIT 0x2 -#define EMPTYWAIT 0x4 -#define THROTTLE 0x8 +#define TXSTOPPED 1 +#define LOWWAIT 2 +#define EMPTYWAIT 3 +#define THROTTLE 4#define SERIAL_DO_RESTART
@@ -235,6 +235,8 @@ static void MoxaSetFifo(struct moxa_port *port, int enable);* I/O functions */ +static DEFINE_SPINLOCK (moxafunc_lock); +static void moxa_wait_finish (void __iomem *ofsAddr) {unsigned long end = jiffies + moxaFuncTout;
@@ -381,14 +383,14 @@ copy:break ; }case TIOCGSERIAL : -mutex_lock (&moxa_openlock); +mutex_lock (&ch->port.mutex); ret =moxa_get_serial_info (ch, argp); -mutex_unlock (&moxa_openlock); +mutex_unlock (&ch->port.mutex);break ;case TIOCSSERIAL : -mutex_lock (&moxa_openlock); +mutex_lock (&ch->port.mutex); ret =moxa_set_serial_info (ch, argp); -mutex_unlock (&moxa_openlock); +mutex_unlock (&ch->port.mutex);break ;default : ret = -ENOIOCTLCMD ;
@@ -433,7 +435,6 @@ static const struct tty_port_operations moxa_port_ops = {static struct tty_driver *moxaDriver; static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0);static DEFINE_SPINLOCK (moxa_lock); -static DEFINE_SPINLOCK (moxafunc_lock);/* * HW init
@@ -1208,9 +1209,7 @@ static void moxa_close(struct tty_struct *tty, struct file *filp) {struct moxa_port *ch = tty->driver_data; ch->cflag = tty->termios->c_cflag; -mutex_lock (&moxa_openlock);tty_port_close (&ch->port, tty, filp); -mutex_unlock (&moxa_openlock); } static int moxa_write(struct tty_struct *tty,
@@ -1226,7 +1225,7 @@ static int moxa_write(struct tty_struct *tty, len =MoxaPortWriteData (tty, buf, count);spin_unlock_bh (&moxa_lock); - ch->statusflags |=LOWWAIT ; +set_bit (LOWWAIT , &ch->statusflags);return len; }
@@ -1264,7 +1263,7 @@ static int moxa_chars_in_buffer(struct tty_struct *tty)* Make it possible to wakeup anything waiting for output * in tty_ioctl.c, etc. */ -if (!(ch->statusflags &EMPTYWAIT )) +if (!test_bit (EMPTYWAIT , &ch->statusflags))moxa_setup_empty_event (tty); }unlock_kernel ();
@@ -1332,14 +1331,14 @@ static void moxa_throttle(struct tty_struct *tty) {struct moxa_port *ch = tty->driver_data; - ch->statusflags |=THROTTLE ; +set_bit (THROTTLE , &ch->statusflags); }static void moxa_unthrottle (struct tty_struct *tty) {struct moxa_port *ch = tty->driver_data; - ch->statusflags &= ~THROTTLE ; +clear_bit (THROTTLE , &ch->statusflags); } static void moxa_set_termios(struct tty_struct *tty,
@@ -1361,7 +1360,7 @@ static void moxa_stop(struct tty_struct *tty)if (ch ==NULL )return ;MoxaPortTxDisable (ch); - ch->statusflags |=TXSTOPPED ; +set_bit (TXSTOPPED , &ch->statusflags); }
@@ -1376,17 +1375,13 @@ static void moxa_start(struct tty_struct *tty)return ;MoxaPortTxEnable (ch); - ch->statusflags &= ~TXSTOPPED ; +clear_bit (TXSTOPPED , &ch->statusflags); }static void moxa_hangup (struct tty_struct *tty) { -struct moxa_port *ch; - -mutex_lock (&moxa_openlock); - ch = tty->driver_data; +struct moxa_port *ch = tty->driver_data;tty_port_hangup (&ch->port); -mutex_unlock (&moxa_openlock); }static void moxa_new_dcdstate (struct moxa_port *p,u8 dcd)
@@ -1412,24 +1407,24 @@ static int moxa_poll_port(struct moxa_port *p, unsigned int handle,u16 intr;if (tty) { -if ((p->statusflags &EMPTYWAIT ) && +if (test_bit (EMPTYWAIT , &p->statusflags) &&MoxaPortTxQueue (p) ==0 ) { - p->statusflags &= ~EMPTYWAIT ; +clear_bit (EMPTYWAIT , &p->statusflags);tty_wakeup (tty); } -if ((p->statusflags &LOWWAIT ) && !tty->stopped && +if (test_bit (LOWWAIT , &p->statusflags) && !tty->stopped &&MoxaPortTxQueue (p) <=WAKEUP_CHARS ) { - p->statusflags &= ~LOWWAIT ; +clear_bit (LOWWAIT , &p->statusflags);tty_wakeup (tty); } -if (inited && !(p->statusflags &THROTTLE ) && +if (inited && !test_bit (THROTTLE , &p->statusflags) &&MoxaPortRxQueue (p) >0 ) {/* RX */ MoxaPortReadData (p);tty_schedule_flip (tty); } }else { - p->statusflags &= ~EMPTYWAIT ; +clear_bit (EMPTYWAIT , &p->statusflags);MoxaPortFlushData (p,0 );/* flush RX */ }
@@ -1533,10 +1528,7 @@ static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termstatic void moxa_setup_empty_event (struct tty_struct *tty) {struct moxa_port *ch = tty->driver_data; - -spin_lock_bh (&moxa_lock); - ch->statusflags |=EMPTYWAIT ; -spin_unlock_bh (&moxa_lock); +set_bit (EMPTYWAIT , &ch->statusflags); }/*****************************************************************************
@@ -1845,7 +1837,7 @@ static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio,writeb (termio->c_cc[VSTOP ], ofsAddr + FuncArg1);writeb (FC_SetXonXoff, ofsAddr + FuncCode);moxa_wait_finish (ofsAddr); -spin_unlock_irqrestore (&moxafunc_lock); +spin_unlock_irq (&moxafunc_lock); }return baud;
Signature · 1 line
1.6.5.5
PATCH 50/58 tty: moxa: Kill off the throttle method
In reply to Greg KHFrom: Alan Cox <[email protected]>
The tty flag can be tested so the shadow flag isn't needed
--- drivers/char/moxa.c | 21 +-------------------- 1 files changed, 1 insertions(+), 20 deletions(-)
drivers/char/moxa.c +1 -20
@@ -154,7 +154,6 @@ struct mon_str {#define TXSTOPPED 1#define LOWWAIT 2#define EMPTYWAIT 3 -#define THROTTLE 4#define SERIAL_DO_RESTART
@@ -194,8 +193,6 @@ static int moxa_write(struct tty_struct *, const unsigned char *, int);static int moxa_write_room (struct tty_struct *);static void moxa_flush_buffer (struct tty_struct *);static int moxa_chars_in_buffer (struct tty_struct *); -static void moxa_throttle (struct tty_struct *); -static void moxa_unthrottle (struct tty_struct *);static void moxa_set_termios (struct tty_struct *,struct ktermios *);static void moxa_stop (struct tty_struct *);static void moxa_start (struct tty_struct *);
@@ -415,8 +412,6 @@ static const struct tty_operations moxa_ops = { .flush_buffer = moxa_flush_buffer, .chars_in_buffer = moxa_chars_in_buffer, .ioctl = moxa_ioctl, - .throttle = moxa_throttle, - .unthrottle = moxa_unthrottle, .set_termios = moxa_set_termios, .stop = moxa_stop, .start = moxa_start,
@@ -1327,20 +1322,6 @@ static int moxa_tiocmset(struct tty_struct *tty, struct file *file,return 0 ; } -static void moxa_throttle (struct tty_struct *tty) -{ -struct moxa_port *ch = tty->driver_data; - -set_bit (THROTTLE , &ch->statusflags); -} - -static void moxa_unthrottle (struct tty_struct *tty) -{ -struct moxa_port *ch = tty->driver_data; - -clear_bit (THROTTLE , &ch->statusflags); -} -static void moxa_set_termios (struct tty_struct *tty,struct ktermios *old_termios) {
@@ -1418,7 +1399,7 @@ static int moxa_poll_port(struct moxa_port *p, unsigned int handle,tty_wakeup (tty); } -if (inited && !test_bit (THROTTLE , &p->statusflags) && +if (inited && !test_bit (TTY_THROTTLED , &tty->flags) &&MoxaPortRxQueue (p) >0 ) {/* RX */ MoxaPortReadData (p);tty_schedule_flip (tty);
Signature · 1 line
1.6.5.5
PATCH 51/58 tty: moxa: Fix modem op locking
In reply to Greg KHFrom: Alan Cox <[email protected]>
This is overkill and mostly not needed
--- drivers/char/moxa.c | 25 ++++++++++--------------- 1 files changed, 10 insertions(+), 15 deletions(-)
drivers/char/moxa.c +10 -15
@@ -139,7 +139,7 @@ struct moxa_port {int cflag;unsigned long statusflags; -u8 DCDState; +u8 DCDState;/* Protected by the port lock */ u8 lineCtrl;u8 lowChkFlag; };
@@ -1141,9 +1141,9 @@ static int moxa_carrier_raised(struct tty_port *port) struct moxa_port *ch = container_of(port, struct moxa_port, port);int dcd; -spin_lock_bh (&moxa_lock); +spin_lock_irq (&port->lock); dcd = ch->DCDState; -spin_unlock_bh (&moxa_lock); +spin_unlock_irq (&port->lock);return dcd; }
@@ -1267,16 +1267,9 @@ static int moxa_chars_in_buffer(struct tty_struct *tty)static int moxa_tiocmget (struct tty_struct *tty,struct file *file) { -struct moxa_port *ch; +struct moxa_port *ch = tty->driver_data;int flag =0 , dtr, rts; -mutex_lock (&moxa_openlock); - ch = tty->driver_data; -if (!ch) { -mutex_unlock (&moxa_openlock); -return -EINVAL ; - } -MoxaPortGetLineOut (ch, &dtr, &rts);if (dtr) flag |=TIOCM_DTR ;
@@ -1289,7 +1282,6 @@ static int moxa_tiocmget(struct tty_struct *tty, struct file *file) flag |=TIOCM_DSR ;if (dtr &4 ) flag |=TIOCM_CD ; -mutex_unlock (&moxa_openlock);return flag; }
@@ -1368,15 +1360,20 @@ static void moxa_hangup(struct tty_struct *tty)static void moxa_new_dcdstate (struct moxa_port *p,u8 dcd) {struct tty_struct *tty; +unsigned long flags; dcd = !!dcd; +spin_lock_irqsave (&p->port.lock, flags);if (dcd != p->DCDState) { + p->DCDState = dcd; +spin_unlock_irqrestore (&p->port.lock, flags); tty =tty_port_tty_get (&p->port);if (tty &&C_CLOCAL (tty) && !dcd)tty_hangup (tty);tty_kref_put (tty); } - p->DCDState = dcd; +else +spin_unlock_irqrestore (&p->port.lock, flags); } static int moxa_poll_port(struct moxa_port *p, unsigned int handle,
@@ -1878,9 +1875,7 @@ static int MoxaPortLineStatus(struct moxa_port *port) val &=0x0B ;if (val &8 ) val |=4 ; -spin_lock_bh (&moxa_lock);moxa_new_dcdstate (port, val &8 ); -spin_unlock_bh (&moxa_lock); val &=7 ;return val; }
Signature · 1 line
1.6.5.5
PATCH 52/58 tty: moxa: Kill the use of lock_kernel
In reply to Greg KHFrom: Alan Cox <[email protected]>
It isn't needed here any more
--- drivers/char/moxa.c | 16 ++-------------- 1 files changed, 2 insertions(+), 14 deletions(-)
drivers/char/moxa.c +2 -14
@@ -34,7 +34,6 @@#include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/major.h> -#include <linux/smp_lock.h> #include <linux/string.h> #include <linux/fcntl.h> #include <linux/ptrace.h>
@@ -202,7 +201,6 @@ static int moxa_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear);static void moxa_poll (unsigned long );static void moxa_set_tty_param (struct tty_struct *,struct ktermios *); -static void moxa_setup_empty_event (struct tty_struct *);static void moxa_shutdown (struct tty_port *);static int moxa_carrier_raised (struct tty_port *);static void moxa_dtr_rts (struct tty_port *,int );
@@ -1251,17 +1249,13 @@ static int moxa_chars_in_buffer(struct tty_struct *tty)struct moxa_port *ch = tty->driver_data;int chars; -lock_kernel (); chars =MoxaPortTxQueue (ch); -if (chars) { +if (chars)/* * Make it possible to wakeup anything waiting for output * in tty_ioctl.c, etc. */ -if (!test_bit (EMPTYWAIT , &ch->statusflags)) -moxa_setup_empty_event (tty); - } -unlock_kernel (); +set_bit (EMPTYWAIT , &ch->statusflags);return chars; }
@@ -1503,12 +1497,6 @@ static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termtty_encode_baud_rate (tty, baud, baud); } -static void moxa_setup_empty_event (struct tty_struct *tty) -{ -struct moxa_port *ch = tty->driver_data; -set_bit (EMPTYWAIT , &ch->statusflags); -} -/***************************************************************************** * Driver level functions: * *****************************************************************************/
Signature · 1 line
1.6.5.5
PATCH 53/58 tty: moxa: split open lock
In reply to Greg KHFrom: Alan Cox <[email protected]>
moxa_openlock is used for several situations where we want to handle the case of an ioctl that crosses many ports (not just the open tty), and also cases where an open races a deinit (eg a pci unplug) and we hangup a port before we can cope with that.
The non open race cases can use the moxa_lock spinlock. This simplifies sorting out the remaining mess.
--- drivers/char/moxa.c | 23 +++++++++++------------ 1 files changed, 11 insertions(+), 12 deletions(-)
drivers/char/moxa.c +11 -12
@@ -163,6 +163,7 @@ static struct mon_str moxaLog;static unsigned int moxaFuncTout =HZ /2 ;static unsigned int moxaLowWaterChk;static DEFINE_MUTEX (moxa_openlock); +static DEFINE_SPINLOCK (moxa_lock);/* Variables for insmod */ #ifdef MODULE static unsigned long baseaddr[MAX_BOARDS ];
@@ -313,22 +314,20 @@ static int moxa_ioctl(struct tty_struct *tty, struct file *file,struct moxa_port *p;unsigned int i, j; -mutex_lock (&moxa_openlock);for (i =0 ; i <MAX_BOARDS ; i++) { p = moxa_boards[i].ports;for (j =0 ; j <MAX_PORTS_PER_BOARD ; j++, p++, argm++) {memset (&tmp,0 ,sizeof (tmp)); +spin_lock_bh (&moxa_lock);if (moxa_boards[i].ready) { tmp.inq =MoxaPortRxQueue (p); tmp.outq =MoxaPortTxQueue (p); } -if (copy_to_user (argm, &tmp,sizeof (tmp))) { -mutex_unlock (&moxa_openlock); +spin_unlock_bh (&moxa_lock); +if (copy_to_user (argm, &tmp,sizeof (tmp)))return -EFAULT ; - } } } -mutex_unlock (&moxa_openlock);break ; }case MOXA_GET_OQUEUE : status =MoxaPortTxQueue (ch);
@@ -344,16 +343,20 @@ static int moxa_ioctl(struct tty_struct *tty, struct file *file,struct moxa_port *p;unsigned int i, j; -mutex_lock (&moxa_openlock);for (i =0 ; i <MAX_BOARDS ; i++) { p = moxa_boards[i].ports;for (j =0 ; j <MAX_PORTS_PER_BOARD ; j++, p++, argm++) {struct tty_struct *ttyp;memset (&tmp,0 ,sizeof (tmp)); -if (!moxa_boards[i].ready) +spin_lock_bh (&moxa_lock); +if (!moxa_boards[i].ready) { +spin_unlock_bh (&moxa_lock); goto copy; + } status =MoxaPortLineStatus (p); +spin_unlock_bh (&moxa_lock); +if (status &1 ) tmp.cts =1 ;if (status &2 )
@@ -368,13 +371,10 @@ static int moxa_ioctl(struct tty_struct *tty, struct file *file, tmp.cflag = ttyp->termios->c_cflag;tty_kref_put (tty); copy: -if (copy_to_user (argm, &tmp,sizeof (tmp))) { -mutex_unlock (&moxa_openlock); +if (copy_to_user (argm, &tmp,sizeof (tmp)))return -EFAULT ; - } } } -mutex_unlock (&moxa_openlock);break ; }case TIOCGSERIAL :
@@ -427,7 +427,6 @@ static const struct tty_port_operations moxa_port_ops = {static struct tty_driver *moxaDriver; static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0); -static DEFINE_SPINLOCK (moxa_lock);/* * HW init
Signature · 1 line
1.6.5.5
PATCH 54/58 tty: push the BKL down into the handlers a bit
In reply to Greg KHFrom: Alan Cox <[email protected]>
Start trying to untangle the remaining BKL mess
Updated to fix missing unlock_kernel noted by Dan Carpenter
--- drivers/char/pty.c | 2 +- drivers/char/tty_io.c | 141 ++++++++++++++++++++++++++-------------------- drivers/char/tty_ldisc.c | 13 ++++ include/linux/tty.h | 2 +- 4 files changed, 95 insertions(+), 63 deletions(-)
drivers/char/pty.c +1 -1
@@ -659,7 +659,7 @@ static int __ptmx_open(struct inode *inode, struct file *filp)if (!retval)return 0 ; out1: -tty_release_dev (filp); +tty_release (inode, filp);return retval; out:devpts_kill_index (inode, index);
drivers/char/tty_io.c +80 -61
357 lines not on this page · raw message
drivers/char/tty_ldisc.c +13 -0
@@ -34,6 +34,8 @@#include <linux/vt_kern.h> #include <linux/selection.h> +#include <linux/smp_lock.h> /* For the moment */ +#include <linux/kmod.h> #include <linux/nsproxy.h>
@@ -545,6 +547,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)if (IS_ERR (new_ldisc))return PTR_ERR (new_ldisc); +lock_kernel ();/* * We need to look at the tty locking here for pty/tty pairs * when both sides try to change in parallel.
@@ -558,6 +561,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)*/ if (tty->ldisc->ops->num == ldisc) { +unlock_kernel ();tty_ldisc_put (new_ldisc);return 0 ; }
@@ -569,6 +573,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)tty_wait_until_sent (tty,0 ); +unlock_kernel ();mutex_lock (&tty->ldisc_mutex);/*
@@ -582,6 +587,9 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0);mutex_lock (&tty->ldisc_mutex); } + +lock_kernel (); +set_bit (TTY_LDISC_CHANGING , &tty->flags);/*
@@ -592,6 +600,8 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) tty->receive_room =0 ; o_ldisc = tty->ldisc; + +unlock_kernel ();/* * Make sure we don't change while someone holds a * reference to the line discipline. The TTY_LDISC bit
@@ -617,12 +627,14 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)flush_scheduled_work ();mutex_lock (&tty->ldisc_mutex); +lock_kernel ();if (test_bit (TTY_HUPPED , &tty->flags)) {/* We were raced by the hangup method. It will have stomped the ldisc data and closed the ldisc down */ clear_bit (TTY_LDISC_CHANGING , &tty->flags);mutex_unlock (&tty->ldisc_mutex);tty_ldisc_put (new_ldisc); +unlock_kernel ();return -EIO ; }
@@ -664,6 +676,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)if (o_work)schedule_delayed_work (&o_tty->buf.work,1 );mutex_unlock (&tty->ldisc_mutex); +unlock_kernel ();return retval; }
include/linux/tty.h +1 -1
@@ -449,7 +449,7 @@ extern void initialize_tty_struct(struct tty_struct *tty, struct tty_driver *driver, int idx);extern struct tty_struct *tty_init_dev (struct tty_driver *driver,int idx,int first_ok); -extern void tty_release_dev (struct file *filp); +extern int tty_release (struct inode *inode,struct file *filp);extern int tty_init_termios (struct tty_struct *tty);extern struct tty_struct *tty_pair_get_tty (struct tty_struct *tty);
Signature · 1 line
1.6.5.5
PATCH 55/58 tty: Push the lock down further into the ldisc code
In reply to Greg KHFrom: Alan Cox <[email protected]>
--- drivers/char/tty_io.c | 2 -- drivers/char/tty_ldisc.c | 12 +++++++++--- 2 files changed, 9 insertions(+), 5 deletions(-)
drivers/char/tty_io.c +0 -2
@@ -1347,9 +1347,7 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,* If we fail here just call release_tty to clean up. No need * to decrement the use counts, as release_tty doesn't care. */ -lock_kernel (); retval =tty_ldisc_setup (tty, tty->link); -unlock_kernel ();if (retval) goto release_mem_out;return tty;
drivers/char/tty_ldisc.c +9 -3
@@ -445,8 +445,14 @@ static void tty_set_termios_ldisc(struct tty_struct *tty, int num)static int tty_ldisc_open (struct tty_struct *tty,struct tty_ldisc *ld) {WARN_ON (test_and_set_bit (TTY_LDISC_OPEN , &tty->flags)); -if (ld->ops->open) -return ld->ops->open (tty); +if (ld->ops->open) { +int ret; +/* BKL here locks verus a hangup event */ +lock_kernel (); + ret = ld->ops->open (tty); +unlock_kernel (); +return ret; + }return 0 ; }
@@ -566,6 +572,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)return 0 ; } +unlock_kernel ();/* * Problem: What do we do if this blocks ? * We could deadlock here
@@ -573,7 +580,6 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)tty_wait_until_sent (tty,0 ); -unlock_kernel ();mutex_lock (&tty->ldisc_mutex);/*
Signature · 1 line
1.6.5.5
PATCH 56/58 tty: Push the bkl down a bit in the hangup code
In reply to Greg KHFrom: Alan Cox <[email protected]>
We know that the redirect field is handled via its own locking in all places
--- drivers/char/tty_io.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
drivers/char/tty_io.c +2 -2
@@ -505,8 +505,6 @@ static void do_tty_hangup(struct work_struct *work)if (!tty)return ; -/* inuse_filps is protected by the single kernel lock */ -lock_kernel ();spin_lock (&redirect_lock);if (redirect && redirect->private_data == tty) {
@@ -515,6 +513,8 @@ static void do_tty_hangup(struct work_struct *work) }spin_unlock (&redirect_lock); +/* inuse_filps is protected by the single kernel lock */ +lock_kernel ();check_tty_count (tty,"do_tty_hangup" );file_list_lock ();/* This breaks for file handles being sent over AF_UNIX sockets ? */
Signature · 1 line
1.6.5.5
PATCH 57/58 tty: Move the leader test in disassociate
In reply to Greg KHFrom: Alan Cox <[email protected]>
There are two call points, both want to check that tty->signal->leader is set. Move the test into disassociate_ctty() as that will make locking changes easier in a bit
--- drivers/char/tty_io.c | 5 +++-- kernel/exit.c | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-)
drivers/char/tty_io.c +3 -2
@@ -707,6 +707,8 @@ void disassociate_ctty(int on_exit)struct tty_struct *tty;struct pid *tty_pgrp =NULL ; +if (!current->signal->leader) +return ; tty =get_current_tty ();if (tty) {
@@ -772,8 +774,7 @@ void no_tty(void) {struct task_struct *tsk = current;lock_kernel (); -if (tsk->signal->leader) -disassociate_ctty (0 ); +disassociate_ctty (0 );unlock_kernel ();proc_clear_tty (tsk); }
kernel/exit.c +1 -1
@@ -971,7 +971,7 @@ NORET_TYPE void do_exit(long code)exit_thread ();cgroup_exit (tsk,1 ); -if (group_dead && tsk->signal->leader) +if (group_dead)disassociate_ctty (1 );module_put (task_thread_info (tsk)->exec_domain->module);
Signature · 1 line
1.6.5.5
PATCH 58/58 tty: split the lock up a bit further
In reply to Greg KHFrom: Alan Cox <[email protected]>
The tty count sanity check may need the BKL, that isn't clear. However it is clear that the count use of the lock is internal and independant of the bigger use of the lock.
Furthermore the file list locking is also separately locked already
--- drivers/char/tty_io.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
drivers/char/tty_io.c +3 -0
@@ -516,6 +516,8 @@ static void do_tty_hangup(struct work_struct *work)/* inuse_filps is protected by the single kernel lock */ lock_kernel ();check_tty_count (tty,"do_tty_hangup" ); +unlock_kernel (); +file_list_lock ();/* This breaks for file handles being sent over AF_UNIX sockets ? */ list_for_each_entry (filp, &tty->tty_files, f_u.fu_list) {
@@ -529,6 +531,7 @@ static void do_tty_hangup(struct work_struct *work) }file_list_unlock (); +lock_kernel ();tty_ldisc_hangup (tty);read_lock (&tasklist_lock);
Signature · 1 line
1.6.5.5
Quoted 1 line · Greg KH
Here's the big TTY patchset for your .33-git tree.
FYI, one of the changes in this tree is causing lockups on x86.
Config attached.
Possible suspects would one of these:
36ba782: tty: split the lock up a bit further 5ec93d1: tty: Move the leader test in disassociate 38c70b2: tty: Push the bkl down a bit in the hangup code
f18f949: tty: Push the lock down further into the ldisc code
eeb89d9: tty: push the BKL down into the handlers a bit
as they deal with locking details and are fresher than two weeks.
Ingo
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.32
# Sat Dec 12 09:32:54 2009
#
# CONFIG_64BIT is not setCONFIG_X86_32=y
# CONFIG_X86_64 is not setCONFIG_X86=yCONFIG_OUTPUT_FORMAT="elf32-i386" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_32_SMP=yCONFIG_X86_HT=yCONFIG_X86_TRAMPOLINE=yCONFIG_KTIME_SCALAR=y
# CONFIG_BOOTPARAM_SUPPORT is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y
#
# General setup
#CONFIG_EXPERIMENTAL=y
# CONFIG_BROKEN_BOOT_ALLOWED3 is not setCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=y
# CONFIG_KERNEL_GZIP is not setCONFIG_KERNEL_BZIP2=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not setCONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not setCONFIG_RCU_TRACE=yCONFIG_RCU_FANOUT=32CONFIG_RCU_FANOUT_EXACT=yCONFIG_TREE_RCU_TRACE=yCONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not setCONFIG_LOG_BUF_SHIFT=20CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not setCONFIG_CGROUPS=yCONFIG_CGROUP_DEBUG=y
# CONFIG_CGROUP_NS is not setCONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not setCONFIG_CPUSETS=yCONFIG_PROC_PID_CPUSET=yCONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not setCONFIG_SYSFS_DEPRECATED=yCONFIG_SYSFS_DEPRECATED_V2=yCONFIG_RELAY=yCONFIG_NAMESPACES=yCONFIG_UTS_NS=yCONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not setCONFIG_NET_NS=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_ANON_INODES=yCONFIG_EMBEDDED=y
# CONFIG_UID16 is not setCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_EXTRA_PASS=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=yCONFIG_BASE_FULL=yCONFIG_FUTEX=y
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not setCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_HAVE_PERF_EVENTS=yCONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#CONFIG_PERF_EVENTS=yCONFIG_EVENT_PROFILE=yCONFIG_PERF_COUNTERS=yCONFIG_DEBUG_PERF_USE_VMALLOC=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_PCI_QUIRKS is not setCONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not setCONFIG_PROFILING=yCONFIG_TRACEPOINTS=yCONFIG_OPROFILE=mCONFIG_OPROFILE_IBS=y
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not setCONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not setCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_ATTRS=yCONFIG_HAVE_DMA_API_DEBUG=yCONFIG_HAVE_USER_RETURN_NOTIFIER=yCONFIG_HAVE_HW_BREAKPOINT=y
#
# GCOV-based kernel profiling
#CONFIG_SLOW_WORK=yCONFIG_SLOW_WORK_DEBUG=yCONFIG_HAVE_GENERIC_DMA_COHERENT=yCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not setCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not setCONFIG_MODULE_SRCVERSION_ALL=yCONFIG_STOP_MACHINE=yCONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not setCONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_CGROUP is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=m CONFIG_IOSCHED_CFQ=y
# CONFIG_CFQ_GROUP_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set # CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set # CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set # CONFIG_INLINE_READ_UNLOCK_IRQ is not set # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set # CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y
#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=yCONFIG_GENERIC_CLOCKEVENTS_BUILD=yCONFIG_SMP=yCONFIG_X86_MPPARSE=yCONFIG_X86_BIGSMP=y
# CONFIG_X86_EXTENDED_PLATFORM is not setCONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not setCONFIG_PARAVIRT_GUEST=y
# CONFIG_VMI is not setCONFIG_KVM_CLOCK=yCONFIG_KVM_GUEST=y
# CONFIG_LGUEST_GUEST is not setCONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not setCONFIG_PARAVIRT_CLOCK=yCONFIG_PARAVIRT_DEBUG=yCONFIG_MEMTEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not setCONFIG_MPENTIUMII=y
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not setCONFIG_X86_CPU=yCONFIG_X86_INTERNODE_CACHE_SHIFT=5CONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=5CONFIG_X86_XADD=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_INTEL_USERCOPY=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=5CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not setCONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_CYRIX_32=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_CENTAUR=yCONFIG_CPU_SUP_TRANSMETA_32=yCONFIG_CPU_SUP_UMC_32=y
# CONFIG_X86_DS is not setCONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not setCONFIG_NR_CPUS=32
# CONFIG_SCHED_SMT is not set
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not setCONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not setCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=yCONFIG_X86_MCE=yCONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not setCONFIG_X86_ANCIENT_MCE=yCONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not setCONFIG_X86_THERMAL_VECTOR=y
# CONFIG_VM86 is not setCONFIG_I8K=yCONFIG_X86_REBOOTFIXUPS=yCONFIG_MICROCODE=mCONFIG_MICROCODE_INTEL=yCONFIG_MICROCODE_AMD=yCONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_X86_MSR is not setCONFIG_X86_CPUID=mCONFIG_X86_CPU_DEBUG=y
# CONFIG_NOHIGHMEM is not setCONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not setCONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not setCONFIG_PAGE_OFFSET=0xC0000000CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not setCONFIG_ARCH_FLATMEM_ENABLE=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_ILLEGAL_POINTER_VALUE=0CONFIG_SELECT_MEMORY_MODEL=yCONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not setCONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=yCONFIG_SPARSEMEM_STATIC=yCONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not setCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_HAVE_MLOCK=yCONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not setCONFIG_DEFAULT_MMAP_MIN_ADDR=4096CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=yCONFIG_MEMORY_FAILURE=yCONFIG_HWPOISON_INJECT=y
# CONFIG_HIGHPTE is not setCONFIG_X86_CHECK_BIOS_CORRUPTION=yCONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=yCONFIG_X86_RESERVE_LOW_64K=yCONFIG_MATH_EMULATION=y
# CONFIG_MTRR is not setCONFIG_SECCOMP=yCONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=250CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not setCONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not setCONFIG_PHYSICAL_ALIGN=0x1000000CONFIG_HOTPLUG_CPU=yCONFIG_COMPAT_VDSO=yCONFIG_CMDLINE_BOOL=yCONFIG_CMDLINE=""
# CONFIG_CMDLINE_OVERRIDE is not setCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#CONFIG_PM=y
# CONFIG_PM_DEBUG is not setCONFIG_PM_SLEEP_SMP=yCONFIG_PM_SLEEP=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=yCONFIG_PM_RUNTIME=y
# CONFIG_ACPI is not set
# CONFIG_SFI is not set
# CONFIG_APM is not set
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
# CONFIG_X86_POWERNOW_K6 is not setCONFIG_X86_POWERNOW_K7=y
# CONFIG_X86_GX_SUSPMOD is not setCONFIG_X86_SPEEDSTEP_CENTRINO=yCONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=yCONFIG_X86_SPEEDSTEP_ICH=y
# CONFIG_X86_SPEEDSTEP_SMI is not setCONFIG_X86_P4_CLOCKMOD=yCONFIG_X86_CPUFREQ_NFORCE2=yCONFIG_X86_LONGRUN=y
# CONFIG_X86_E_POWERSAVER is not set
#
# shared options # CONFIG_X86_SPEEDSTEP_LIB=y CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_OLPC=yCONFIG_PCI_DOMAINS=yCONFIG_PCIEPORTBUS=yCONFIG_HOTPLUG_PCI_PCIE=m
# CONFIG_PCIEAER is not set
# CONFIG_PCIEASPM is not setCONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not setCONFIG_PCI_LEGACY=yCONFIG_PCI_DEBUG=yCONFIG_PCI_STUB=y
# CONFIG_HT_IRQ is not setCONFIG_PCI_IOV=yCONFIG_ISA_DMA_API=yCONFIG_ISA=yCONFIG_EISA=y
# CONFIG_EISA_VLB_PRIMING is not setCONFIG_EISA_PCI_EISA=yCONFIG_EISA_VIRTUAL_ROOT=yCONFIG_EISA_NAMES=yCONFIG_MCA=y
# CONFIG_MCA_LEGACY is not set
CONFIG_SCx200=y
# CONFIG_SCx200HR_TIMER is not setCONFIG_OLPC=yCONFIG_PCCARD=mCONFIG_PCMCIA=mCONFIG_PCMCIA_LOAD_CIS=y
# CONFIG_PCMCIA_IOCTL is not set
# CONFIG_CARDBUS is not set
#
# PC-card bridges
#CONFIG_YENTA=mCONFIG_YENTA_O2=yCONFIG_YENTA_RICOH=y
# CONFIG_YENTA_TI is not setCONFIG_YENTA_TOSHIBA=yCONFIG_PD6729=mCONFIG_I82092=m
# CONFIG_I82365 is not setCONFIG_TCIC=mCONFIG_PCMCIA_PROBE=yCONFIG_PCCARD_NONSTATIC=mCONFIG_HOTPLUG_PCI=mCONFIG_HOTPLUG_PCI_FAKE=mCONFIG_HOTPLUG_PCI_COMPAQ=mCONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
# CONFIG_HOTPLUG_PCI_IBM is not setCONFIG_HOTPLUG_PCI_CPCI=yCONFIG_HOTPLUG_PCI_CPCI_ZT5550=mCONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not setCONFIG_HAVE_AOUT=yCONFIG_BINFMT_AOUT=yCONFIG_BINFMT_MISC=mCONFIG_HAVE_ATOMIC_IOMAP=yCONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not setCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=yCONFIG_XFRM_SUB_POLICY=y
# CONFIG_XFRM_MIGRATE is not setCONFIG_XFRM_STATISTICS=yCONFIG_XFRM_IPCOMP=yCONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not setCONFIG_INET=yCONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not setCONFIG_IP_FIB_HASH=yCONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=yCONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not setCONFIG_NET_IPIP=mCONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not setCONFIG_ARPD=yCONFIG_SYN_COOKIES=yCONFIG_INET_AH=yCONFIG_INET_ESP=yCONFIG_INET_IPCOMP=yCONFIG_INET_XFRM_TUNNEL=yCONFIG_INET_TUNNEL=yCONFIG_INET_XFRM_MODE_TRANSPORT=mCONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_XFRM_MODE_BEET is not setCONFIG_INET_LRO=yCONFIG_INET_DIAG=mCONFIG_INET_TCP_DIAG=mCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=m
# CONFIG_TCP_CONG_CUBIC is not set
# CONFIG_TCP_CONG_WESTWOOD is not setCONFIG_TCP_CONG_HTCP=mCONFIG_TCP_CONG_HSTCP=mCONFIG_TCP_CONG_HYBLA=y
# CONFIG_TCP_CONG_VEGAS is not setCONFIG_TCP_CONG_SCALABLE=yCONFIG_TCP_CONG_LP=mCONFIG_TCP_CONG_VENO=m
# CONFIG_TCP_CONG_YEAH is not setCONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not setCONFIG_DEFAULT_RENO=yCONFIG_DEFAULT_TCP_CONG="reno"CONFIG_TCP_MD5SIG=yCONFIG_IPV6=yCONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not setCONFIG_IPV6_OPTIMISTIC_DAD=yCONFIG_INET6_AH=yCONFIG_INET6_ESP=m
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not setCONFIG_INET6_TUNNEL=y
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not setCONFIG_INET6_XFRM_MODE_TUNNEL=yCONFIG_INET6_XFRM_MODE_BEET=mCONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=mCONFIG_IPV6_SIT=yCONFIG_IPV6_SIT_6RD=yCONFIG_IPV6_NDISC_NODETYPE=yCONFIG_IPV6_TUNNEL=yCONFIG_IPV6_MULTIPLE_TABLES=yCONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not setCONFIG_NETLABEL=yCONFIG_NETWORK_SECMARK=yCONFIG_NETFILTER=yCONFIG_NETFILTER_DEBUG=y
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=yCONFIG_NETFILTER_NETLINK_LOG=y
# CONFIG_NF_CONNTRACK is not setCONFIG_NETFILTER_XTABLES=yCONFIG_NETFILTER_XT_TARGET_MARK=mCONFIG_NETFILTER_XT_TARGET_NFLOG=yCONFIG_NETFILTER_XT_TARGET_SECMARK=yCONFIG_NETFILTER_XT_TARGET_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not setCONFIG_IP_VS=y
# CONFIG_IP_VS_IPV6 is not setCONFIG_IP_VS_DEBUG=yCONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
# CONFIG_IP_VS_PROTO_TCP is not setCONFIG_IP_VS_PROTO_UDP=yCONFIG_IP_VS_PROTO_AH_ESP=yCONFIG_IP_VS_PROTO_ESP=yCONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
# CONFIG_IP_VS_RR is not setCONFIG_IP_VS_WRR=mCONFIG_IP_VS_LC=yCONFIG_IP_VS_WLC=m
# CONFIG_IP_VS_LBLC is not setCONFIG_IP_VS_LBLCR=y
# CONFIG_IP_VS_DH is not setCONFIG_IP_VS_SH=yCONFIG_IP_VS_SED=mCONFIG_IP_VS_NQ=y
#
# IPVS application helper
#
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not setCONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_FILTER is not setCONFIG_IP_NF_TARGET_LOG=mCONFIG_IP_NF_TARGET_ULOG=yCONFIG_IP_NF_MANGLE=m
#
# IPv6: Netfilter Configuration
#CONFIG_IP6_NF_IPTABLES=yCONFIG_IP6_NF_MATCH_IPV6HEADER=mCONFIG_IP6_NF_TARGET_LOG=m
# CONFIG_IP6_NF_FILTER is not set
# CONFIG_IP6_NF_MANGLE is not setCONFIG_IP_DCCP=mCONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#CONFIG_IP_DCCP_CCID2_DEBUG=yCONFIG_IP_DCCP_CCID3=yCONFIG_IP_DCCP_CCID3_DEBUG=yCONFIG_IP_DCCP_CCID3_RTO=100CONFIG_IP_DCCP_TFRC_LIB=yCONFIG_IP_DCCP_TFRC_DEBUG=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not setCONFIG_IP_SCTP=yCONFIG_SCTP_DBG_MSG=y
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not setCONFIG_SCTP_HMAC_MD5=yCONFIG_RDS=m
# CONFIG_RDS_RDMA is not set
# CONFIG_RDS_TCP is not setCONFIG_RDS_DEBUG=yCONFIG_TIPC=mCONFIG_TIPC_ADVANCED=yCONFIG_TIPC_ZONES=3CONFIG_TIPC_CLUSTERS=1CONFIG_TIPC_NODES=255CONFIG_TIPC_SLAVE_NODES=0CONFIG_TIPC_PORTS=8191CONFIG_TIPC_LOG=0CONFIG_TIPC_DEBUG=y
# CONFIG_ATM is not setCONFIG_STP=yCONFIG_GARP=yCONFIG_BRIDGE=y
# CONFIG_NET_DSA is not setCONFIG_VLAN_8021Q=yCONFIG_VLAN_8021Q_GVRP=yCONFIG_DECNET=yCONFIG_DECNET_ROUTER=yCONFIG_LLC=yCONFIG_LLC2=mCONFIG_IPX=yCONFIG_IPX_INTERN=yCONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not setCONFIG_LAPB=mCONFIG_ECONET=mCONFIG_ECONET_AUNUDP=yCONFIG_ECONET_NATIVE=yCONFIG_WAN_ROUTER=yCONFIG_PHONET=yCONFIG_IEEE802154=mCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not setCONFIG_NET_SCH_HTB=m
# CONFIG_NET_SCH_HFSC is not setCONFIG_NET_SCH_PRIO=mCONFIG_NET_SCH_MULTIQ=mCONFIG_NET_SCH_RED=m
# CONFIG_NET_SCH_SFQ is not setCONFIG_NET_SCH_TEQL=yCONFIG_NET_SCH_TBF=y
# CONFIG_NET_SCH_GRED is not setCONFIG_NET_SCH_DSMARK=y
# CONFIG_NET_SCH_NETEM is not setCONFIG_NET_SCH_DRR=mCONFIG_NET_SCH_INGRESS=m
#
# Classification
#CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not setCONFIG_NET_CLS_TCINDEX=yCONFIG_NET_CLS_ROUTE4=mCONFIG_NET_CLS_ROUTE=yCONFIG_NET_CLS_FW=y
# CONFIG_NET_CLS_U32 is not setCONFIG_NET_CLS_RSVP=yCONFIG_NET_CLS_RSVP6=yCONFIG_NET_CLS_FLOW=y
# CONFIG_NET_CLS_CGROUP is not setCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32CONFIG_NET_EMATCH_CMP=yCONFIG_NET_EMATCH_NBYTE=yCONFIG_NET_EMATCH_U32=mCONFIG_NET_EMATCH_META=y
# CONFIG_NET_EMATCH_TEXT is not setCONFIG_NET_CLS_ACT=yCONFIG_NET_ACT_POLICE=y
# CONFIG_NET_ACT_GACT is not setCONFIG_NET_ACT_MIRRED=yCONFIG_NET_ACT_IPT=mCONFIG_NET_ACT_NAT=yCONFIG_NET_ACT_PEDIT=yCONFIG_NET_ACT_SIMP=m
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_CLS_IND is not setCONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
#
# Network testing
#CONFIG_NET_PKTGEN=y
# CONFIG_NET_DROP_MONITOR is not setCONFIG_HAMRADIO=y
#
# Packet Radio protocols
#CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not setCONFIG_NETROM=mCONFIG_ROSE=m
#
# AX.25 network device drivers
#CONFIG_MKISS=mCONFIG_6PACK=mCONFIG_BPQETHER=mCONFIG_SCC=m
# CONFIG_SCC_DELAY is not setCONFIG_SCC_TRXECHO=yCONFIG_BAYCOM_SER_FDX=mCONFIG_BAYCOM_SER_HDX=mCONFIG_YAM=m
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not setCONFIG_FIB_RULES=yCONFIG_WIRELESS=yCONFIG_WIRELESS_EXT=yCONFIG_WEXT_CORE=yCONFIG_WEXT_PROC=yCONFIG_WEXT_SPY=yCONFIG_WEXT_PRIV=y
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT_SYSFS is not setCONFIG_LIB80211=yCONFIG_LIB80211_CRYPT_WEP=yCONFIG_LIB80211_CRYPT_CCMP=yCONFIG_LIB80211_CRYPT_TKIP=y
# CONFIG_LIB80211_DEBUG is not set
#
# CFG80211 needs to be enabled for MAC80211
#CONFIG_WIMAX=mCONFIG_WIMAX_DEBUG_LEVEL=8
# CONFIG_RFKILL is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_DEVTMPFS=yCONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""CONFIG_DEBUG_DRIVER=yCONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not setCONFIG_CONNECTOR=m
# CONFIG_PARPORT is not set
# CONFIG_PNP is not setCONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not setCONFIG_BLK_CPQ_DA=yCONFIG_BLK_CPQ_CISS_DA=yCONFIG_CISS_SCSI_TAPE=yCONFIG_BLK_DEV_DAC960=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected #
# CONFIG_BLK_DEV_DRBD is not setCONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_OSD is not setCONFIG_BLK_DEV_SX8=yCONFIG_BLK_DEV_UB=mCONFIG_BLK_DEV_RAM=mCONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096CONFIG_BLK_DEV_XIP=yCONFIG_CDROM_PKTCDVD=yCONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not setCONFIG_VIRTIO_BLK=mCONFIG_BLK_DEV_HD=yCONFIG_MISC_DEVICES=yCONFIG_IBM_ASM=yCONFIG_PHANTOM=mCONFIG_SGI_IOC4=mCONFIG_TIFM_CORE=m
# CONFIG_TIFM_7XX1 is not setCONFIG_ICS932S401=mCONFIG_ENCLOSURE_SERVICES=mCONFIG_HP_ILO=y
# CONFIG_DELL_LAPTOP is not setCONFIG_ISL29003=m
# CONFIG_DS1682 is not setCONFIG_C2PORT=mCONFIG_C2PORT_DURAMAR_2150=m
#
# EEPROM support
#CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not setCONFIG_EEPROM_MAX6875=m
# CONFIG_EEPROM_93CX6 is not setCONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not setCONFIG_CB710_DEBUG_ASSUMPTIONS=yCONFIG_IWMC3200TOP=mCONFIG_IWMC3200TOP_DEBUG=yCONFIG_IWMC3200TOP_DEBUGFS=yCONFIG_HAVE_IDE=y
#
# SCSI device support
#CONFIG_RAID_ATTRS=yCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=yCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=yCONFIG_CHR_DEV_ST=mCONFIG_CHR_DEV_OSST=yCONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not setCONFIG_CHR_DEV_SG=mCONFIG_CHR_DEV_SCH=m
# CONFIG_SCSI_ENCLOSURE is not setCONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not setCONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not setCONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=yCONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_FC_TGT_ATTRS is not setCONFIG_SCSI_ISCSI_ATTRS=yCONFIG_SCSI_SAS_ATTRS=yCONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not setCONFIG_SCSI_SAS_HOST_SMP=yCONFIG_SCSI_SAS_LIBSAS_DEBUG=yCONFIG_SCSI_SRP_ATTRS=m
# CONFIG_SCSI_SRP_TGT_ATTRS is not setCONFIG_SCSI_LOWLEVEL=yCONFIG_ISCSI_TCP=yCONFIG_SCSI_CXGB3_ISCSI=yCONFIG_SCSI_BNX2_ISCSI=yCONFIG_BE2ISCSI=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not setCONFIG_SCSI_3W_9XXX=yCONFIG_SCSI_3W_SAS=yCONFIG_SCSI_7000FASST=yCONFIG_SCSI_ACARD=yCONFIG_SCSI_AHA152X=y
# CONFIG_SCSI_AHA1542 is not setCONFIG_SCSI_AHA1740=yCONFIG_SCSI_AACRAID=yCONFIG_SCSI_AIC7XXX=yCONFIG_AIC7XXX_CMDS_PER_DEVICE=32CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not setCONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not setCONFIG_SCSI_AIC7XXX_OLD=yCONFIG_SCSI_AIC79XX=yCONFIG_AIC79XX_CMDS_PER_DEVICE=32CONFIG_AIC79XX_RESET_DELAY_MS=5000CONFIG_AIC79XX_DEBUG_ENABLE=yCONFIG_AIC79XX_DEBUG_MASK=0CONFIG_AIC79XX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not setCONFIG_SCSI_DPT_I2O=mCONFIG_SCSI_ADVANSYS=mCONFIG_SCSI_IN2000=yCONFIG_SCSI_ARCMSR=yCONFIG_MEGARAID_NEWGEN=yCONFIG_MEGARAID_MM=mCONFIG_MEGARAID_MAILBOX=mCONFIG_MEGARAID_LEGACY=yCONFIG_MEGARAID_SAS=yCONFIG_SCSI_MPT2SAS=mCONFIG_SCSI_MPT2SAS_MAX_SGE=128CONFIG_SCSI_MPT2SAS_LOGGING=y
# CONFIG_SCSI_HPTIOP is not setCONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_FLASHPOINT is not setCONFIG_VMWARE_PVSCSI=yCONFIG_LIBFC=yCONFIG_LIBFCOE=yCONFIG_FCOE=y
# CONFIG_FCOE_FNIC is not setCONFIG_SCSI_DMX3191D=y
# CONFIG_SCSI_DTC3280 is not setCONFIG_SCSI_EATA=mCONFIG_SCSI_EATA_TAGGED_QUEUE=yCONFIG_SCSI_EATA_LINKED_COMMANDS=yCONFIG_SCSI_EATA_MAX_TAGS=16CONFIG_SCSI_FUTURE_DOMAIN=mCONFIG_SCSI_GDTH=yCONFIG_SCSI_GENERIC_NCR5380=mCONFIG_SCSI_GENERIC_NCR5380_MMIO=yCONFIG_SCSI_GENERIC_NCR53C400=yCONFIG_SCSI_IBMMCA=mCONFIG_IBMMCA_SCSI_ORDER_STANDARD=yCONFIG_IBMMCA_SCSI_DEV_RESET=yCONFIG_SCSI_IPS=mCONFIG_SCSI_INITIO=y
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not setCONFIG_SCSI_NCR_D700=yCONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not setCONFIG_SCSI_IPR=yCONFIG_SCSI_IPR_TRACE=yCONFIG_SCSI_IPR_DUMP=yCONFIG_SCSI_NCR_Q720=yCONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_PAS16 is not setCONFIG_SCSI_QLOGIC_FAS=yCONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLA_FC is not setCONFIG_SCSI_QLA_ISCSI=yCONFIG_SCSI_LPFC=yCONFIG_SCSI_LPFC_DEBUG_FS=yCONFIG_SCSI_SIM710=yCONFIG_SCSI_SYM53C416=y
CONFIG_SCSI_DC395x=y
# CONFIG_SCSI_DC390T is not setCONFIG_SCSI_T128=mCONFIG_SCSI_U14_34F=mCONFIG_SCSI_U14_34F_TAGGED_QUEUE=yCONFIG_SCSI_U14_34F_LINKED_COMMANDS=yCONFIG_SCSI_U14_34F_MAX_TAGS=8
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_PMCRAID is not setCONFIG_SCSI_PM8001=yCONFIG_SCSI_SRP=yCONFIG_SCSI_BFA_FC=mCONFIG_SCSI_LOWLEVEL_PCMCIA=yCONFIG_PCMCIA_AHA152X=m
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not setCONFIG_PCMCIA_QLOGIC=mCONFIG_PCMCIA_SYM53C500=m
# CONFIG_SCSI_DH is not setCONFIG_SCSI_OSD_INITIATOR=yCONFIG_SCSI_OSD_ULD=mCONFIG_SCSI_OSD_DPRINT_SENSE=1CONFIG_SCSI_OSD_DEBUG=yCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not setCONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_SATA_PMP is not setCONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not setCONFIG_ATA_SFF=yCONFIG_SATA_SVW=mCONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not setCONFIG_SATA_NV=yCONFIG_PDC_ADMA=mCONFIG_SATA_QSTOR=m
# CONFIG_SATA_PROMISE is not setCONFIG_SATA_SX4=mCONFIG_SATA_SIL=m
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not setCONFIG_SATA_VIA=yCONFIG_SATA_VITESSE=mCONFIG_SATA_INIC162X=yCONFIG_PATA_ALI=mCONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATP867X is not setCONFIG_PATA_ATIIXP=mCONFIG_PATA_CMD640_PCI=y
# CONFIG_PATA_CMD64X is not setCONFIG_PATA_CS5520=yCONFIG_PATA_CS5530=m
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not setCONFIG_PATA_CYPRESS=m
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not setCONFIG_PATA_HPT366=mCONFIG_PATA_HPT37X=mCONFIG_PATA_HPT3X2N=y
# CONFIG_PATA_HPT3X3 is not setCONFIG_PATA_IT821X=mCONFIG_PATA_IT8213=y
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_LEGACY is not setCONFIG_PATA_TRIFLEX=yCONFIG_PATA_MARVELL=y
# CONFIG_PATA_MPIIX is not setCONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not setCONFIG_PATA_NS87410=m
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not setCONFIG_PATA_PCMCIA=mCONFIG_PATA_PDC2027X=yCONFIG_PATA_PDC_OLD=yCONFIG_PATA_QDI=yCONFIG_PATA_RADISYS=yCONFIG_PATA_RDC=m
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not setCONFIG_PATA_SIL680=mCONFIG_PATA_SIS=mCONFIG_PATA_TOSHIBA=y
# CONFIG_PATA_VIA is not setCONFIG_PATA_WINBOND=m
# CONFIG_PATA_WINBOND_VLB is not setCONFIG_PATA_PLATFORM=mCONFIG_PATA_SCH=y
# CONFIG_MD is not setCONFIG_FUSION=yCONFIG_FUSION_SPI=y
# CONFIG_FUSION_FC is not setCONFIG_FUSION_SAS=yCONFIG_FUSION_MAX_SGE=128CONFIG_FUSION_CTL=mCONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks. #
#
# See the help texts for more information.
#CONFIG_FIREWIRE=mCONFIG_FIREWIRE_OHCI=mCONFIG_FIREWIRE_OHCI_DEBUG=yCONFIG_FIREWIRE_SBP2=mCONFIG_FIREWIRE_NET=mCONFIG_IEEE1394=mCONFIG_IEEE1394_OHCI1394=mCONFIG_IEEE1394_PCILYNX=mCONFIG_IEEE1394_SBP2=mCONFIG_IEEE1394_SBP2_PHYS_DMA=yCONFIG_IEEE1394_ETH1394_ROM_ENTRY=yCONFIG_IEEE1394_ETH1394=mCONFIG_IEEE1394_RAWIO=mCONFIG_IEEE1394_VIDEO1394=mCONFIG_IEEE1394_DV1394=mCONFIG_IEEE1394_VERBOSEDEBUG=yCONFIG_I2O=m
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not setCONFIG_I2O_EXT_ADAPTEC=yCONFIG_I2O_CONFIG=mCONFIG_I2O_CONFIG_OLD_IOCTL=y
# CONFIG_I2O_BUS is not setCONFIG_I2O_BLOCK=m
# CONFIG_I2O_SCSI is not setCONFIG_I2O_PROC=mCONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not setCONFIG_NETDEVICES=yCONFIG_IFB=mCONFIG_DUMMY=mCONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not setCONFIG_TUN=mCONFIG_VETH=y
# CONFIG_ARCNET is not setCONFIG_PHYLIB=y
#
# MII PHY device drivers
#CONFIG_MARVELL_PHY=mCONFIG_DAVICOM_PHY=yCONFIG_QSEMI_PHY=mCONFIG_LXT_PHY=m
# CONFIG_CICADA_PHY is not set CONFIG_VITESSE_PHY=yCONFIG_SMSC_PHY=yCONFIG_BROADCOM_PHY=yCONFIG_ICPLUS_PHY=m
# CONFIG_REALTEK_PHY is not set CONFIG_NATIONAL_PHY=y
# CONFIG_STE10XP is not set CONFIG_LSI_ET1011C_PHY=y CONFIG_FIXED_PHY=yCONFIG_MDIO_BITBANG=m CONFIG_NET_ETHERNET=yCONFIG_MII=yCONFIG_HAPPYMEAL=mCONFIG_SUNGEM=yCONFIG_CASSINI=mCONFIG_NET_VENDOR_3COM=yCONFIG_EL1=m
# CONFIG_EL2 is not setCONFIG_ELPLUS=mCONFIG_EL16=yCONFIG_EL3=yCONFIG_3C515=yCONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
# CONFIG_LANCE is not set CONFIG_NET_VENDOR_SMC=yCONFIG_ULTRAMCA=y
# CONFIG_ULTRA is not setCONFIG_ULTRA32=yCONFIG_SMC9194=mCONFIG_ENC28J60=m CONFIG_ENC28J60_WRITEVERIFY=y
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_RACAL is not set CONFIG_DNET=y
# CONFIG_NET_TULIP is not set CONFIG_AT1700=yCONFIG_DEPCA=y
# CONFIG_HP100 is not setCONFIG_NET_ISA=y
# CONFIG_E2100 is not set
# CONFIG_EWRK3 is not set
# CONFIG_EEXPRESS is not set CONFIG_EEXPRESS_PRO=y
# CONFIG_HPLAN is not set
# CONFIG_LP486E is not setCONFIG_ETH16I=yCONFIG_NE2000=y
# CONFIG_ZNET is not set
# CONFIG_SEEQ8005 is not set
# CONFIG_IBMLANA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=yCONFIG_PCNET32=m
# CONFIG_AMD8111_ETH is not set CONFIG_ADAPTEC_STARFIRE=yCONFIG_AC3200=mCONFIG_APRICOT=yCONFIG_B44=yCONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=yCONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set CONFIG_CS89x0=mCONFIG_E100=yCONFIG_LNE390=mCONFIG_FEALNX=m
# CONFIG_NATSEMI is not set CONFIG_NE2K_PCI=y
# CONFIG_NE3210 is not setCONFIG_ES3210=mCONFIG_8139CP=yCONFIG_8139TOO=yCONFIG_8139TOO_PIO=y CONFIG_8139TOO_TUNE_TWISTER=y CONFIG_8139TOO_8129=y CONFIG_8139_OLD_RX_RESET=yCONFIG_R6040=m
# CONFIG_SIS900 is not set CONFIG_EPIC100=yCONFIG_SMSC9420=y
# CONFIG_SUNDANCE is not setCONFIG_TLAN=yCONFIG_KS8842=mCONFIG_KS8851=mCONFIG_KS8851_MLL=y
# CONFIG_VIA_RHINE is not set CONFIG_SC92031=yCONFIG_ATL2=yCONFIG_NETDEV_1000=yCONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set CONFIG_DL2K=yCONFIG_E1000=yCONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not setCONFIG_IGBVF=mCONFIG_NS83820=yCONFIG_HAMACHI=yCONFIG_YELLOWFIN=mCONFIG_R8169=m
# CONFIG_R8169_VLAN is not set CONFIG_SIS190=m
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=yCONFIG_BNX2=yCONFIG_CNIC=yCONFIG_QLA3XXX=yCONFIG_ATL1=mCONFIG_ATL1E=yCONFIG_ATL1C=y
# CONFIG_JME is not set CONFIG_NETDEV_10000=yCONFIG_MDIO=y
# CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y CONFIG_CHELSIO_T3=y
# CONFIG_ENIC is not setCONFIG_IXGBE=m
# CONFIG_IXGBE_DCA is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not setCONFIG_NIU=m
# CONFIG_MLX4_EN is not set CONFIG_MLX4_CORE=mCONFIG_MLX4_DEBUG=y
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not setCONFIG_QLGE=mCONFIG_SFC=m
# CONFIG_BE2NET is not set
# CONFIG_TR is not setCONFIG_WLAN=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AIRO_CS is not set CONFIG_PCMCIA_WL3501=m
# CONFIG_PRISM54 is not set CONFIG_USB_ZD1201=yCONFIG_HOSTAP=yCONFIG_HOSTAP_FIRMWARE=y
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set CONFIG_HOSTAP_PLX=y
# CONFIG_HOSTAP_PCI is not set CONFIG_HOSTAP_CS=m
#
# WiMAX Wireless Broadband devices
#CONFIG_WIMAX_I2400M=mCONFIG_WIMAX_I2400M_SDIO=mCONFIG_WIMAX_IWMC3200_SDIO=yCONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not setCONFIG_USB_PEGASUS=yCONFIG_USB_RTL8150=m
# CONFIG_USB_USBNET is not set
# CONFIG_USB_CDC_PHONET is not setCONFIG_NET_PCMCIA=yCONFIG_PCMCIA_3C589=mCONFIG_PCMCIA_3C574=mCONFIG_PCMCIA_FMVJ18X=m
# CONFIG_PCMCIA_PCNET is not setCONFIG_PCMCIA_NMCLAN=m
# CONFIG_PCMCIA_SMC91C92 is not setCONFIG_PCMCIA_XIRC2PS=mCONFIG_PCMCIA_AXNET=mCONFIG_WAN=y
# CONFIG_HOSTESS_SV11 is not setCONFIG_COSA=m
# CONFIG_LANMEDIA is not set
# CONFIG_SEALEVEL_4021 is not setCONFIG_HDLC=mCONFIG_HDLC_RAW=mCONFIG_HDLC_RAW_ETH=m
# CONFIG_HDLC_CISCO is not setCONFIG_HDLC_FR=mCONFIG_HDLC_PPP=mCONFIG_HDLC_X25=mCONFIG_PCI200SYN=m
# CONFIG_WANXL is not set
# CONFIG_PC300TOO is not setCONFIG_N2=m
# CONFIG_C101 is not set
# CONFIG_FARSYNC is not setCONFIG_DSCC4=mCONFIG_DSCC4_PCISYNC=yCONFIG_DSCC4_PCI_RST=yCONFIG_DLCI=yCONFIG_DLCI_MAX=8
# CONFIG_SDLA is not set
# CONFIG_WAN_ROUTER_DRIVERS is not setCONFIG_SBNI=mCONFIG_SBNI_MULTILINE=yCONFIG_IEEE802154_DRIVERS=m
# CONFIG_IEEE802154_FAKEHARD is not setCONFIG_FDDI=m
# CONFIG_DEFXX is not setCONFIG_SKFP=m
# CONFIG_HIPPI is not setCONFIG_PPP=mCONFIG_PPP_MULTILINK=y
# CONFIG_PPP_FILTER is not setCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=m
# CONFIG_PPP_DEFLATE is not setCONFIG_PPP_BSDCOMP=mCONFIG_PPP_MPPE=m
# CONFIG_PPPOE is not setCONFIG_PPPOL2TP=m
# CONFIG_SLIP is not setCONFIG_SLHC=mCONFIG_NET_FC=yCONFIG_NETCONSOLE=yCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=yCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=yCONFIG_VIRTIO_NET=mCONFIG_VMXNET3=mCONFIG_ISDN=y
# CONFIG_ISDN_I4L is not setCONFIG_ISDN_CAPI=m
# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not setCONFIG_CAPI_TRACE=yCONFIG_ISDN_CAPI_MIDDLEWARE=yCONFIG_ISDN_CAPI_CAPI20=mCONFIG_ISDN_CAPI_CAPIFS_BOOL=yCONFIG_ISDN_CAPI_CAPIFS=m
#
# CAPI hardware drivers
#CONFIG_CAPI_AVM=y
# CONFIG_ISDN_DRV_AVMB1_B1ISA is not setCONFIG_ISDN_DRV_AVMB1_B1PCI=mCONFIG_ISDN_DRV_AVMB1_B1PCIV4=yCONFIG_ISDN_DRV_AVMB1_T1ISA=mCONFIG_ISDN_DRV_AVMB1_B1PCMCIA=mCONFIG_ISDN_DRV_AVMB1_AVM_CS=m
# CONFIG_ISDN_DRV_AVMB1_T1PCI is not setCONFIG_ISDN_DRV_AVMB1_C4=mCONFIG_CAPI_EICON=y
# CONFIG_ISDN_DIVAS is not set
# CONFIG_ISDN_DRV_GIGASET is not setCONFIG_PHONE=y
# CONFIG_PHONE_IXJ is not set
#
# Input device support
#CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not setCONFIG_INPUT_POLLDEV=yCONFIG_INPUT_SPARSEKMAP=m
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not setCONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ADP5588=mCONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_MAX7359 is not setCONFIG_KEYBOARD_NEWTON=y
# CONFIG_KEYBOARD_OPENCORES is not setCONFIG_KEYBOARD_STOWAWAY=yCONFIG_KEYBOARD_SUNKBD=yCONFIG_KEYBOARD_XTKBD=mCONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not setCONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not setCONFIG_MOUSE_BCM5974=mCONFIG_MOUSE_INPORT=yCONFIG_MOUSE_ATIXL=yCONFIG_MOUSE_LOGIBM=yCONFIG_MOUSE_PC110PAD=y
# CONFIG_MOUSE_VSXXXAA is not setCONFIG_MOUSE_SYNAPTICS_I2C=mCONFIG_INPUT_JOYSTICK=yCONFIG_JOYSTICK_ANALOG=mCONFIG_JOYSTICK_A3D=mCONFIG_JOYSTICK_ADI=m
# CONFIG_JOYSTICK_COBRA is not setCONFIG_JOYSTICK_GF2K=mCONFIG_JOYSTICK_GRIP=yCONFIG_JOYSTICK_GRIP_MP=mCONFIG_JOYSTICK_GUILLEMOT=mCONFIG_JOYSTICK_INTERACT=yCONFIG_JOYSTICK_SIDEWINDER=yCONFIG_JOYSTICK_TMDC=y
# CONFIG_JOYSTICK_IFORCE is not setCONFIG_JOYSTICK_WARRIOR=y
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not setCONFIG_JOYSTICK_SPACEBALL=yCONFIG_JOYSTICK_STINGER=m
# CONFIG_JOYSTICK_TWIDJOY is not setCONFIG_JOYSTICK_ZHENHUA=yCONFIG_JOYSTICK_JOYDUMP=mCONFIG_JOYSTICK_XPAD=y
# CONFIG_JOYSTICK_XPAD_FF is not setCONFIG_INPUT_TABLET=yCONFIG_TABLET_USB_ACECAD=yCONFIG_TABLET_USB_AIPTEK=yCONFIG_TABLET_USB_GTCO=yCONFIG_TABLET_USB_KBTAB=mCONFIG_TABLET_USB_WACOM=mCONFIG_INPUT_TOUCHSCREEN=yCONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_TOUCHSCREEN_AD7877 is not setCONFIG_TOUCHSCREEN_AD7879_I2C=mCONFIG_TOUCHSCREEN_AD7879=m
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_EETI is not setCONFIG_TOUCHSCREEN_FUJITSU=m
# CONFIG_TOUCHSCREEN_GUNZE is not setCONFIG_TOUCHSCREEN_ELO=mCONFIG_TOUCHSCREEN_WACOM_W8001=yCONFIG_TOUCHSCREEN_MCS5000=mCONFIG_TOUCHSCREEN_MTOUCH=yCONFIG_TOUCHSCREEN_INEXIO=mCONFIG_TOUCHSCREEN_MK712=m
# CONFIG_TOUCHSCREEN_HTCPEN is not setCONFIG_TOUCHSCREEN_PENMOUNT=m
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not setCONFIG_TOUCHSCREEN_TOUCHWIN=mCONFIG_TOUCHSCREEN_USB_COMPOSITE=mCONFIG_TOUCHSCREEN_USB_EGALAX=yCONFIG_TOUCHSCREEN_USB_PANJIT=yCONFIG_TOUCHSCREEN_USB_3M=yCONFIG_TOUCHSCREEN_USB_ITM=yCONFIG_TOUCHSCREEN_USB_ETURBO=yCONFIG_TOUCHSCREEN_USB_GUNZE=yCONFIG_TOUCHSCREEN_USB_DMC_TSC10=yCONFIG_TOUCHSCREEN_USB_IRTOUCH=yCONFIG_TOUCHSCREEN_USB_IDEALTEK=y
# CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not setCONFIG_TOUCHSCREEN_USB_GOTOP=yCONFIG_TOUCHSCREEN_USB_JASTEC=yCONFIG_TOUCHSCREEN_USB_E2I=y
# CONFIG_TOUCHSCREEN_USB_ZYTRONIC is not setCONFIG_TOUCHSCREEN_USB_ETT_TC5UH=yCONFIG_TOUCHSCREEN_TOUCHIT213=m
# CONFIG_TOUCHSCREEN_TSC2007 is not setCONFIG_TOUCHSCREEN_PCAP=y
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not setCONFIG_SERIO_CT82C710=m
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not setCONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not setCONFIG_GAMEPORT_L4=y
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not setCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_DEVKMEM=yCONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not setCONFIG_CYCLADES=yCONFIG_CYZ_INTR=y
# CONFIG_DIGIEPCA is not setCONFIG_MOXA_INTELLIO=y
# CONFIG_MOXA_SMARTIO is not setCONFIG_ISI=m
# CONFIG_SYNCLINK is not setCONFIG_SYNCLINKMP=mCONFIG_SYNCLINK_GT=mCONFIG_N_HDLC=yCONFIG_RISCOM8=yCONFIG_SPECIALIX=m
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_CS=mCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not setCONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not setCONFIG_SERIAL_8250_MCA=m
#
# Non-8250 serial port support
#CONFIG_SERIAL_MAX3100=yCONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_CONSOLE_POLL=yCONFIG_SERIAL_JSM=mCONFIG_UNIX98_PTYS=yCONFIG_DEVPTS_MULTIPLE_INSTANCES=yCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256CONFIG_HVC_DRIVER=yCONFIG_VIRTIO_CONSOLE=yCONFIG_IPMI_HANDLER=mCONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not setCONFIG_IPMI_DEVICE_INTERFACE=m
# CONFIG_IPMI_SI is not setCONFIG_IPMI_WATCHDOG=mCONFIG_IPMI_POWEROFF=mCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_TIMERIOMEM=mCONFIG_HW_RANDOM_INTEL=yCONFIG_HW_RANDOM_AMD=mCONFIG_HW_RANDOM_GEODE=m
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not setCONFIG_NVRAM=yCONFIG_DTLK=mCONFIG_R3964=y
# CONFIG_APPLICOM is not setCONFIG_SONYPI=y
#
# PCMCIA character devices
#CONFIG_SYNCLINK_CS=m
# CONFIG_CARDMAN_4000 is not setCONFIG_CARDMAN_4040=mCONFIG_IPWIRELESS=m
# CONFIG_MWAVE is not set
# CONFIG_SCx200_GPIO is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not setCONFIG_RAW_DRIVER=mCONFIG_MAX_RAW_DEVS=256CONFIG_HANGCHECK_TIMER=yCONFIG_TCG_TPM=mCONFIG_TCG_NSC=mCONFIG_TCG_ATMEL=m
# CONFIG_TELCLOCK is not setCONFIG_DEVPORT=yCONFIG_I2C=mCONFIG_I2C_BOARDINFO=yCONFIG_I2C_COMPAT=yCONFIG_I2C_CHARDEV=mCONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_ALGOBIT=mCONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#CONFIG_I2C_ALI1535=m
# CONFIG_I2C_ALI1563 is not setCONFIG_I2C_ALI15X3=mCONFIG_I2C_AMD756=mCONFIG_I2C_AMD8111=m
# CONFIG_I2C_I801 is not setCONFIG_I2C_ISCH=m
# CONFIG_I2C_PIIX4 is not setCONFIG_I2C_NFORCE2=mCONFIG_I2C_SIS5595=mCONFIG_I2C_SIS630=m
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not setCONFIG_I2C_VIAPRO=m
#
# I2C system bus drivers (mostly embedded / system-on-chip) #CONFIG_I2C_OCORES=mCONFIG_I2C_SIMTEC=m
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#CONFIG_I2C_PCA_PLATFORM=mCONFIG_I2C_STUB=m
# CONFIG_SCx200_ACB is not set
#
# Miscellaneous I2C Chip support
#CONFIG_SENSORS_TSL2550=mCONFIG_I2C_DEBUG_CORE=yCONFIG_I2C_DEBUG_ALGO=y
# CONFIG_I2C_DEBUG_BUS is not setCONFIG_I2C_DEBUG_CHIP=yCONFIG_SPI=y
# CONFIG_SPI_DEBUG is not setCONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#CONFIG_SPI_BITBANG=y
#
# SPI Protocol Masters
#CONFIG_SPI_SPIDEV=yCONFIG_SPI_TLE62X0=y
#
# PPS support
#
# CONFIG_PPS is not setCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not setCONFIG_W1=yCONFIG_W1_CON=y
#
# 1-wire Bus Masters
#CONFIG_W1_MASTER_MATROX=yCONFIG_W1_MASTER_DS2490=mCONFIG_W1_MASTER_DS2482=m
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not setCONFIG_W1_SLAVE_DS2431=yCONFIG_W1_SLAVE_DS2433=yCONFIG_W1_SLAVE_DS2433_CRC=yCONFIG_W1_SLAVE_DS2760=y
# CONFIG_W1_SLAVE_BQ27000 is not setCONFIG_POWER_SUPPLY=yCONFIG_POWER_SUPPLY_DEBUG=y
# CONFIG_PDA_POWER is not setCONFIG_BATTERY_DS2760=yCONFIG_BATTERY_DS2782=m
# CONFIG_BATTERY_OLPC is not set
CONFIG_BATTERY_BQ27x00=m
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_CHARGER_PCF50633 is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not setCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#CONFIG_SSB=yCONFIG_SSB_SPROM=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
# CONFIG_SSB_SILENT is not setCONFIG_SSB_DEBUG=yCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#CONFIG_MFD_CORE=y
# CONFIG_MFD_SM501 is not setCONFIG_HTC_PASIC3=y
# CONFIG_MFD_TMIO is not setCONFIG_MFD_WM8400=m
# CONFIG_MFD_WM831X is not setCONFIG_MFD_PCF50633=m
# CONFIG_MFD_MC13783 is not set
# CONFIG_PCF50633_ADC is not setCONFIG_PCF50633_GPIO=mCONFIG_AB3100_CORE=mCONFIG_AB3100_OTP=mCONFIG_EZX_PCAP=yCONFIG_REGULATOR=yCONFIG_REGULATOR_DEBUG=yCONFIG_REGULATOR_FIXED_VOLTAGE=m
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not setCONFIG_REGULATOR_BQ24022=m
# CONFIG_REGULATOR_MAX1586 is not setCONFIG_REGULATOR_WM8400=m
# CONFIG_REGULATOR_PCF50633 is not setCONFIG_REGULATOR_LP3971=mCONFIG_REGULATOR_PCAP=mCONFIG_REGULATOR_AB3100=mCONFIG_REGULATOR_TPS65023=m
# CONFIG_REGULATOR_TPS6507X is not setCONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#CONFIG_VIDEO_DEV=mCONFIG_VIDEO_V4L2_COMMON=mCONFIG_VIDEO_ALLOW_V4L1=yCONFIG_VIDEO_V4L1_COMPAT=yCONFIG_DVB_CORE=mCONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#CONFIG_VIDEO_SAA7146=mCONFIG_VIDEO_SAA7146_VV=mCONFIG_MEDIA_ATTACH=yCONFIG_MEDIA_TUNER=mCONFIG_MEDIA_TUNER_CUSTOMISE=yCONFIG_MEDIA_TUNER_SIMPLE=m
# CONFIG_MEDIA_TUNER_TDA8290 is not set
# CONFIG_MEDIA_TUNER_TDA827X is not setCONFIG_MEDIA_TUNER_TDA18271=mCONFIG_MEDIA_TUNER_TDA9887=mCONFIG_MEDIA_TUNER_TEA5761=mCONFIG_MEDIA_TUNER_TEA5767=mCONFIG_MEDIA_TUNER_MT20XX=mCONFIG_MEDIA_TUNER_MT2060=m
# CONFIG_MEDIA_TUNER_MT2266 is not set
# CONFIG_MEDIA_TUNER_MT2131 is not setCONFIG_MEDIA_TUNER_QT1010=mCONFIG_MEDIA_TUNER_XC2028=m
# CONFIG_MEDIA_TUNER_XC5000 is not set
# CONFIG_MEDIA_TUNER_MXL5005S is not setCONFIG_MEDIA_TUNER_MXL5007T=m
# CONFIG_MEDIA_TUNER_MC44S803 is not setCONFIG_VIDEO_V4L2=mCONFIG_VIDEO_V4L1=mCONFIG_VIDEOBUF_GEN=mCONFIG_VIDEOBUF_DMA_SG=mCONFIG_VIDEO_IR=m
# CONFIG_VIDEO_CAPTURE_DRIVERS is not setCONFIG_RADIO_ADAPTERS=yCONFIG_RADIO_CADET=mCONFIG_RADIO_RTRACK2=m
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not setCONFIG_RADIO_GEMTEK_PCI=mCONFIG_RADIO_MAXIRADIO=mCONFIG_RADIO_MAESTRO=mCONFIG_RADIO_SF16FMI=mCONFIG_RADIO_SF16FMR2=mCONFIG_RADIO_TERRATEC=mCONFIG_RADIO_TRUST=mCONFIG_RADIO_TYPHOON=m
# CONFIG_RADIO_ZOLTRIX is not setCONFIG_I2C_SI4713=mCONFIG_RADIO_SI4713=mCONFIG_USB_DSBR=m
# CONFIG_RADIO_SI470X is not setCONFIG_USB_MR800=mCONFIG_RADIO_TEA5764=m
# CONFIG_RADIO_TEF6862 is not setCONFIG_DVB_MAX_ADAPTERS=8CONFIG_DVB_DYNAMIC_MINORS=yCONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#CONFIG_TTPCI_EEPROM=m
# CONFIG_DVB_AV7110 is not setCONFIG_DVB_BUDGET_CORE=m
# CONFIG_DVB_BUDGET is not setCONFIG_DVB_BUDGET_CI=mCONFIG_DVB_BUDGET_AV=m
#
# Supported USB Adapters
#
# CONFIG_DVB_TTUSB_BUDGET is not setCONFIG_DVB_TTUSB_DEC=mCONFIG_SMS_SIANO_MDTV=m
#
# Siano module components
#
# CONFIG_SMS_USB_DRV is not setCONFIG_SMS_SDIO_DRV=m
#
# Supported FlexCopII (B2C2) Adapters
#CONFIG_DVB_B2C2_FLEXCOP=mCONFIG_DVB_B2C2_FLEXCOP_PCI=mCONFIG_DVB_B2C2_FLEXCOP_USB=mCONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
#
# Supported BT878 Adapters
#
#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set
#
# Supported SDMC DM1105 Adapters
#
# CONFIG_DVB_DM1105 is not set
#
# Supported FireWire (IEEE 1394) Adapters
#CONFIG_DVB_FIREDTV=mCONFIG_DVB_FIREDTV_FIREWIRE=yCONFIG_DVB_FIREDTV_IEEE1394=yCONFIG_DVB_FIREDTV_INPUT=y
#
# Supported Earthsoft PT1 Adapters
#CONFIG_DVB_PT1=m
#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not setCONFIG_DVB_STB0899=mCONFIG_DVB_STB6100=mCONFIG_DVB_CX24123=mCONFIG_DVB_MT312=mCONFIG_DVB_S5H1420=mCONFIG_DVB_STV0299=mCONFIG_DVB_TDA8261=mCONFIG_DVB_TUNER_ITD1000=mCONFIG_DVB_TUNER_CX24113=mCONFIG_DVB_TUA6100=mCONFIG_DVB_TDA1004X=mCONFIG_DVB_MT352=mCONFIG_DVB_TDA10021=mCONFIG_DVB_TDA10023=mCONFIG_DVB_STV0297=mCONFIG_DVB_NXT200X=mCONFIG_DVB_BCM3510=mCONFIG_DVB_LGDT330X=mCONFIG_DVB_PLL=mCONFIG_DVB_LNBP21=mCONFIG_DVB_ISL6421=mCONFIG_DAB=yCONFIG_USB_DABUSB=m
#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_VGA_ARB is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not setCONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_FB is not setCONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not setCONFIG_BACKLIGHT_CLASS_DEVICE=yCONFIG_BACKLIGHT_GENERIC=mCONFIG_BACKLIGHT_PROGEAR=y
# CONFIG_BACKLIGHT_MBP_NVIDIA is not setCONFIG_BACKLIGHT_SAHARA=m
#
# Display device support
#CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_VGACON_SOFT_SCROLLBACK=yCONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64CONFIG_DUMMY_CONSOLE=y
CONFIG_FONT_8x16=y
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not setCONFIG_USB_MOUSE=yCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=y
# CONFIG_USB_DEBUG is not setCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=yCONFIG_USB_DEVICE_CLASS=yCONFIG_USB_DYNAMIC_MINORS=yCONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not setCONFIG_USB_MON=yCONFIG_USB_WUSB=mCONFIG_USB_WUSB_CBAF=mCONFIG_USB_WUSB_CBAF_DEBUG=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not setCONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not setCONFIG_USB_ISP116X_HCD=yCONFIG_USB_ISP1760_HCD=mCONFIG_USB_ISP1362_HCD=mCONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=yCONFIG_USB_SL811_HCD=mCONFIG_USB_SL811_CS=mCONFIG_USB_R8A66597_HCD=yCONFIG_USB_HWA_HCD=m
#
# USB Device Class drivers
#CONFIG_USB_ACM=m
# CONFIG_USB_PRINTER is not setCONFIG_USB_WDM=mCONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
#
# also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_STORAGE is not set CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not setCONFIG_USB_MICROTEK=m
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not setCONFIG_USB_SEVSEG=yCONFIG_USB_RIO500=m
# CONFIG_USB_LEGOTOWER is not setCONFIG_USB_LCD=mCONFIG_USB_BERRY_CHARGE=y
# CONFIG_USB_LED is not setCONFIG_USB_CYPRESS_CY7C63=mCONFIG_USB_CYTHERM=mCONFIG_USB_IDMOUSE=y
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not setCONFIG_USB_SISUSBVGA=yCONFIG_USB_SISUSBVGA_CON=yCONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not setCONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not setCONFIG_USB_ISIGHTFW=m
# CONFIG_USB_VST is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not setCONFIG_UWB=mCONFIG_UWB_HWA=m
# CONFIG_UWB_WHCI is not set
# CONFIG_UWB_WLP is not set
# CONFIG_UWB_I1480U is not setCONFIG_MMC=mCONFIG_MMC_DEBUG=y
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#CONFIG_MMC_BLOCK=m
# CONFIG_MMC_BLOCK_BOUNCE is not set
# CONFIG_SDIO_UART is not setCONFIG_MMC_TEST=m
#
# MMC/SD/SDIO Host Controller Drivers
#CONFIG_MMC_SDHCI=m
# CONFIG_MMC_SDHCI_PCI is not setCONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not setCONFIG_MMC_TIFM_SD=mCONFIG_MMC_SDRICOH_CS=m
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not setCONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not setCONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not setCONFIG_MEMSTICK_JMICRON_38X=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not setCONFIG_INFINIBAND=yCONFIG_INFINIBAND_USER_MAD=yCONFIG_INFINIBAND_USER_ACCESS=mCONFIG_INFINIBAND_USER_MEM=yCONFIG_INFINIBAND_ADDR_TRANS=y
# CONFIG_INFINIBAND_MTHCA is not set
# CONFIG_INFINIBAND_AMSO1100 is not set
# CONFIG_INFINIBAND_CXGB3 is not setCONFIG_MLX4_INFINIBAND=mCONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not setCONFIG_INFINIBAND_IPOIB=yCONFIG_INFINIBAND_IPOIB_CM=y
# CONFIG_INFINIBAND_IPOIB_DEBUG is not setCONFIG_INFINIBAND_SRP=mCONFIG_INFINIBAND_ISER=m
# CONFIG_EDAC is not setCONFIG_RTC_LIB=yCONFIG_RTC_CLASS=yCONFIG_RTC_HCTOSYS=yCONFIG_RTC_HCTOSYS_DEVICE="rtc0"CONFIG_RTC_DEBUG=y
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=yCONFIG_RTC_INTF_DEV_UIE_EMUL=yCONFIG_RTC_DRV_TEST=m
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not setCONFIG_RTC_DRV_DS1374=mCONFIG_RTC_DRV_DS1672=m
# CONFIG_RTC_DRV_MAX6900 is not setCONFIG_RTC_DRV_RS5C372=m
# CONFIG_RTC_DRV_ISL1208 is not setCONFIG_RTC_DRV_X1205=mCONFIG_RTC_DRV_PCF8563=mCONFIG_RTC_DRV_PCF8583=m
# CONFIG_RTC_DRV_M41T80 is not setCONFIG_RTC_DRV_S35390A=m
# CONFIG_RTC_DRV_FM3130 is not setCONFIG_RTC_DRV_RX8581=mCONFIG_RTC_DRV_RX8025=m
#
# SPI RTC drivers
#CONFIG_RTC_DRV_M41T94=y
# CONFIG_RTC_DRV_DS1305 is not setCONFIG_RTC_DRV_DS1390=yCONFIG_RTC_DRV_MAX6902=mCONFIG_RTC_DRV_R9701=mCONFIG_RTC_DRV_RS5C348=yCONFIG_RTC_DRV_DS3234=mCONFIG_RTC_DRV_PCF2123=y
#
# Platform RTC drivers
#CONFIG_RTC_DRV_CMOS=yCONFIG_RTC_DRV_DS1286=mCONFIG_RTC_DRV_DS1511=m
# CONFIG_RTC_DRV_DS1553 is not setCONFIG_RTC_DRV_DS1742=mCONFIG_RTC_DRV_STK17TA8=yCONFIG_RTC_DRV_M48T86=yCONFIG_RTC_DRV_M48T35=mCONFIG_RTC_DRV_M48T59=mCONFIG_RTC_DRV_MSM6242=mCONFIG_RTC_DRV_BQ4802=m
# CONFIG_RTC_DRV_RP5C01 is not setCONFIG_RTC_DRV_V3020=yCONFIG_RTC_DRV_PCF50633=mCONFIG_RTC_DRV_AB3100=m
#
# on-CPU RTC drivers
#CONFIG_RTC_DRV_PCAP=mCONFIG_DMADEVICES=y
#
# DMA Devices
#CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH=yCONFIG_INTEL_IOATDMA=mCONFIG_DMA_ENGINE=y
#
# DMA Clients
#CONFIG_NET_DMA=yCONFIG_ASYNC_TX_DMA=yCONFIG_DMATEST=yCONFIG_DCA=mCONFIG_AUXDISPLAY=yCONFIG_UIO=y
# CONFIG_UIO_CIF is not setCONFIG_UIO_PDRV=y
# CONFIG_UIO_PDRV_GENIRQ is not setCONFIG_UIO_SMX=mCONFIG_UIO_AEC=mCONFIG_UIO_SERCOS3=mCONFIG_UIO_PCI_GENERIC=m
#
# TI VLYNQ
#
# CONFIG_STAGING is not setCONFIG_X86_PLATFORM_DEVICES=y
#
# Firmware Drivers
#CONFIG_EDD=mCONFIG_EDD_OFF=yCONFIG_FIRMWARE_MEMMAP=yCONFIG_DELL_RBU=yCONFIG_DCDBAS=mCONFIG_DMIID=yCONFIG_ISCSI_IBFT_FIND=yCONFIG_ISCSI_IBFT=y
#
# File systems
#CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not setCONFIG_EXT3_FS=yCONFIG_EXT3_DEFAULTS_TO_ORDERED=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=yCONFIG_EXT4_FS=yCONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not setCONFIG_EXT4_DEBUG=yCONFIG_JBD=y
# CONFIG_JBD_DEBUG is not setCONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not setCONFIG_FS_MBCACHE=yCONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not setCONFIG_REISERFS_PROC_INFO=yCONFIG_REISERFS_FS_XATTR=yCONFIG_REISERFS_FS_POSIX_ACL=yCONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not setCONFIG_FS_POSIX_ACL=yCONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not setCONFIG_XFS_POSIX_ACL=yCONFIG_XFS_RT=yCONFIG_XFS_DEBUG=y
# CONFIG_OCFS2_FS is not setCONFIG_BTRFS_FS=m
# CONFIG_BTRFS_FS_POSIX_ACL is not setCONFIG_NILFS2_FS=yCONFIG_FILE_LOCKING=yCONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not setCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_QUOTA=yCONFIG_QUOTA_NETLINK_INTERFACE=yCONFIG_PRINT_QUOTA_WARNING=yCONFIG_QUOTA_TREE=mCONFIG_QFMT_V1=mCONFIG_QFMT_V2=mCONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not setCONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not setCONFIG_GENERIC_ACL=y
#
# Caches
#CONFIG_FSCACHE=mCONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not setCONFIG_FSCACHE_DEBUG=yCONFIG_FSCACHE_OBJECT_LIST=yCONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not setCONFIG_CACHEFILES_HISTOGRAM=y
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=mCONFIG_JOLIET=yCONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=yCONFIG_VFAT_FS=mCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=y
# CONFIG_PROC_SYSCTL is not setCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not setCONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not setCONFIG_EXPORTFS=m
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not setCONFIG_OSF_PARTITION=yCONFIG_AMIGA_PARTITION=yCONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=yCONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not setCONFIG_LDM_PARTITION=yCONFIG_LDM_DEBUG=yCONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not setCONFIG_KARMA_PARTITION=yCONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=yCONFIG_NLS_CODEPAGE_737=mCONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not setCONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not setCONFIG_NLS_CODEPAGE_857=yCONFIG_NLS_CODEPAGE_860=yCONFIG_NLS_CODEPAGE_861=mCONFIG_NLS_CODEPAGE_862=mCONFIG_NLS_CODEPAGE_863=mCONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not setCONFIG_NLS_CODEPAGE_936=yCONFIG_NLS_CODEPAGE_950=m
# CONFIG_NLS_CODEPAGE_932 is not setCONFIG_NLS_CODEPAGE_949=mCONFIG_NLS_CODEPAGE_874=yCONFIG_NLS_ISO8859_8=yCONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not setCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=mCONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not setCONFIG_NLS_ISO8859_4=mCONFIG_NLS_ISO8859_5=y
# CONFIG_NLS_ISO8859_6 is not setCONFIG_NLS_ISO8859_7=m
# CONFIG_NLS_ISO8859_9 is not setCONFIG_NLS_ISO8859_13=m
# CONFIG_NLS_ISO8859_14 is not setCONFIG_NLS_ISO8859_15=mCONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not setCONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not setCONFIG_ALLOW_WARNINGS=yCONFIG_ENABLE_WARN_DEPRECATED=yCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=1024CONFIG_MAGIC_SYSRQ=yCONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not setCONFIG_DEBUG_FS=yCONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not setCONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not setCONFIG_DETECT_HUNG_TASK=yCONFIG_BOOTPARAM_HUNG_TASK_PANIC=yCONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1CONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_TIMER_STATS=yCONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not setCONFIG_DEBUG_OBJECTS_FREE=yCONFIG_DEBUG_OBJECTS_TIMERS=y
# CONFIG_DEBUG_OBJECTS_WORK is not setCONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1CONFIG_SLUB_DEBUG_ON=yCONFIG_SLUB_STATS=y
# CONFIG_DEBUG_RT_MUTEXES is not setCONFIG_RT_MUTEX_TESTER=yCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_LOCK_ALLOC=yCONFIG_PROVE_LOCKING=yCONFIG_LOCKDEP=yCONFIG_LOCK_STAT=yCONFIG_DEBUG_LOCKDEP=yCONFIG_TRACE_IRQFLAGS=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not setCONFIG_STACKTRACE=y
# CONFIG_DEBUG_HIGHMEM is not setCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_VM=yCONFIG_DEBUG_VIRTUAL=yCONFIG_DEBUG_WRITECOUNT=yCONFIG_DEBUG_MEMORY_INIT=yCONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not setCONFIG_DEBUG_NOTIFIERS=yCONFIG_DEBUG_CREDENTIALS=yCONFIG_ARCH_WANT_FRAME_POINTERS=yCONFIG_FRAME_POINTER=yCONFIG_BOOT_PRINTK_DELAY=yCONFIG_RCU_TORTURE_TEST=y
# CONFIG_RCU_TORTURE_TEST_RUNNABLE is not setCONFIG_RCU_CPU_STALL_DETECTOR=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not setCONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not setCONFIG_FAIL_PAGE_ALLOC=yCONFIG_FAIL_MAKE_REQUEST=yCONFIG_FAIL_IO_TIMEOUT=yCONFIG_FAULT_INJECTION_DEBUG_FS=yCONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
# CONFIG_LATENCYTOP is not setCONFIG_DEBUG_PAGEALLOC=yCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FTRACE_NMI_ENTER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_SYSCALL_TRACEPOINTS=yCONFIG_TRACER_MAX_TRACE=yCONFIG_RING_BUFFER=yCONFIG_FTRACE_NMI_ENTER=yCONFIG_EVENT_TRACING=yCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_RING_BUFFER_ALLOW_SWAP=yCONFIG_TRACING=yCONFIG_GENERIC_TRACER=yCONFIG_TRACING_SUPPORT=yCONFIG_FTRACE=yCONFIG_FUNCTION_TRACER=y
# CONFIG_FUNCTION_GRAPH_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not setCONFIG_SYSPROF_TRACER=yCONFIG_SCHED_TRACER=y
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not setCONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not setCONFIG_POWER_TRACER=yCONFIG_KSYM_TRACER=y
# CONFIG_PROFILE_KSYM_TRACER is not set
# CONFIG_STACK_TRACER is not setCONFIG_KMEMTRACE=y
# CONFIG_WORKQUEUE_TRACER is not setCONFIG_BLK_DEV_IO_TRACE=yCONFIG_DYNAMIC_FTRACE=yCONFIG_FUNCTION_PROFILER=yCONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not setCONFIG_MMIOTRACE=yCONFIG_MMIOTRACE_TEST=m
# CONFIG_RING_BUFFER_BENCHMARK is not setCONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_BUILD_DOCSRC is not setCONFIG_DYNAMIC_DEBUG=y
# CONFIG_DMA_API_DEBUG is not setCONFIG_SAMPLES=y
# CONFIG_SAMPLE_TRACEPOINTS is not setCONFIG_SAMPLE_TRACE_EVENTS=mCONFIG_SAMPLE_KOBJECT=mCONFIG_SAMPLE_HW_BREAKPOINT=mCONFIG_HAVE_ARCH_KGDB=yCONFIG_KGDB=yCONFIG_KGDB_SERIAL_CONSOLE=m
# CONFIG_KGDB_TESTS is not setCONFIG_HAVE_ARCH_KMEMCHECK=yCONFIG_STRICT_DEVMEM=yCONFIG_X86_VERBOSE_BOOTUP=yCONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not setCONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not setCONFIG_DEBUG_PER_CPU_MAPS=y
# CONFIG_X86_PTDUMP is not setCONFIG_DEBUG_RODATA=yCONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_NX_TEST is not setCONFIG_4KSTACKS=yCONFIG_DOUBLEFAULT=yCONFIG_IOMMU_STRESS=yCONFIG_HAVE_MMIOTRACE_SUPPORT=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not setCONFIG_IO_DELAY_UDELAY=y
# CONFIG_IO_DELAY_NONE is not setCONFIG_DEFAULT_IO_DELAY_TYPE=2
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not setCONFIG_OPTIMIZE_INLINING=y
#
# Security options
#CONFIG_KEYS=yCONFIG_KEYS_DEBUG_PROC_KEYS=yCONFIG_SECURITY=yCONFIG_SECURITYFS=yCONFIG_SECURITY_NETWORK=yCONFIG_SECURITY_NETWORK_XFRM=yCONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_SMACK is not setCONFIG_SECURITY_TOMOYO=y
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not setCONFIG_DEFAULT_SECURITY_TOMOYO=y
# CONFIG_DEFAULT_SECURITY_DAC is not setCONFIG_DEFAULT_SECURITY="tomoyo"CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=yCONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=yCONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_FIPS=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_PCOMP=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=yCONFIG_CRYPTO_GF128MUL=yCONFIG_CRYPTO_NULL=yCONFIG_CRYPTO_WORKQUEUE=yCONFIG_CRYPTO_CRYPTD=yCONFIG_CRYPTO_AUTHENC=yCONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not setCONFIG_CRYPTO_SEQIV=y
#
# Block modes
#CONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_CTR=yCONFIG_CRYPTO_CTS=yCONFIG_CRYPTO_ECB=yCONFIG_CRYPTO_LRW=yCONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#CONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=m
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#CONFIG_CRYPTO_CRC32C=yCONFIG_CRYPTO_CRC32C_INTEL=mCONFIG_CRYPTO_GHASH=m
# CONFIG_CRYPTO_MD4 is not setCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_MICHAEL_MIC=yCONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not setCONFIG_CRYPTO_RMD320=mCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not setCONFIG_CRYPTO_WP512=y
#
# Ciphers
#CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_586 is not setCONFIG_CRYPTO_ANUBIS=mCONFIG_CRYPTO_ARC4=yCONFIG_CRYPTO_BLOWFISH=yCONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not setCONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not setCONFIG_CRYPTO_SALSA20=m
# CONFIG_CRYPTO_SALSA20_586 is not setCONFIG_CRYPTO_SEED=m
# CONFIG_CRYPTO_SERPENT is not setCONFIG_CRYPTO_TEA=m
# CONFIG_CRYPTO_TWOFISH is not setCONFIG_CRYPTO_TWOFISH_COMMON=yCONFIG_CRYPTO_TWOFISH_586=y
#
# Compression
#CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not setCONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#CONFIG_CRYPTO_ANSI_CPRNG=y
# CONFIG_CRYPTO_HW is not setCONFIG_HAVE_KVM=yCONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not setCONFIG_VIRTIO=yCONFIG_VIRTIO_RING=y
# CONFIG_VIRTIO_PCI is not setCONFIG_VIRTIO_BALLOON=yCONFIG_BINARY_PRINTF=y
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_GENERIC_FIND_LAST_BIT=yCONFIG_CRC_CCITT=yCONFIG_CRC16=yCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=mCONFIG_CRC32=yCONFIG_CRC7=mCONFIG_LIBCRC32C=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_LZO_COMPRESS=yCONFIG_LZO_DECOMPRESS=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_CHECK_SIGNATURE=yCONFIG_CPUMASK_OFFSTACK=yCONFIG_NLATTR=yCONFIG_FORCE_SUCCESSFUL_BUILD=yCONFIG_FORCE_MINIMAL_CONFIG=yCONFIG_FORCE_MINIMAL_CONFIG_PHYS=yCONFIG_X86_32_ALWAYS_ON=y
Andrew Morton
maintainerQuoted 10 lines · On Sat, 12 Dec 2009 09:46:11 +0100 Ingo Molnar <[email protected]> wrote:
Quoted 1 line · Greg KH
Here's the big TTY patchset for your .33-git tree.
FYI, one of the changes in this tree is causing lockups on x86.
Config attached.
Possible suspects would one of these:
Quoted 7 lines
36ba782: tty: split the lock up a bit further 5ec93d1: tty: Move the leader test in disassociate 38c70b2: tty: Push the bkl down a bit in the hangup code
f18f949: tty: Push the lock down further into the ldisc code
eeb89d9: tty: push the BKL down into the handlers a bitas they deal with locking details and are fresher than two weeks.
yes, I started getting lockups yesterday when all this hit linux-next. Seems to be quite .config-dependent.
I get all-cpu backtraces which show all eight CPUs stuck on either lock_kernel() or files_lock(). It appears that both locks are held.
The do_tty_hangup()->tty_fasync() path takes the locks in the file_list_lock()->lock_kernel() direction whereas most other code takes them in the other direction, which cannot be good. But I'm not sure that this recent merge significantly changed anything in that area. Enabling lockdep makes the hang go away.
Have a trace. I'm actually wondering if perhaps there's a missing unlock_kernel() somewhere else, and the tty code is just the victim of that.
(hm, this trace only showed 6 CPUs. It's a bit of a mess)
[ 72.525902] INFO: RCU detected CPU 0 stall (t=2500 jiffies) [ 72.525969] NMI backtrace for cpu 4 [ 72.526024] CPU 4 [ 72.526154] Process irqbalance (pid: 3152, threadinfo ffff88025d86e000, task ffff880256fac040) [ 72.526209] Stack: [ 72.526255] 0000000000000000 ffff88025d86fd08 ffffffff811a12f5 ffff88025d86fd38 [ 72.526434] <0> ffffffff811a572f ffff88025f0a2910 ffff88024a85c4c0 0000000000000000 [ 72.526698] <0> ffff88024a63f698 ffff88025d86fd48 ffffffff81383af9 ffff88025d86fd68 [ 72.527005] Call Trace: [ 72.527057] [<ffffffff811a12f5>] __delay+0xa/0xc [ 72.527112] [<ffffffff811a572f>] _raw_spin_lock+0xbc/0x125 [ 72.527165] [<ffffffff81383af9>] _spin_lock+0x9/0xb [ 72.527220] [<ffffffff810ce929>] file_move+0x1e/0x4d [ 72.527247] [<ffffffff810cd033>] __dentry_open+0x17e/0x2ef [ 72.527247] [<ffffffff810cd26e>] nameidata_to_filp+0x3e/0x4f [ 72.527247] [<ffffffff810d8bd5>] do_filp_open+0x529/0x972 [ 72.527247] [<ffffffff8105935b>] ? hrtimer_cancel+0x11/0x1d [ 72.527247] [<ffffffff811a1fa3>] ? __strncpy_from_user+0x2b/0x55 [ 72.527247] [<ffffffff81383b04>] ? _spin_unlock+0x9/0xb [ 72.527247] [<ffffffff810e2520>] ? alloc_fd+0x111/0x121 [ 72.527247] [<ffffffff810cc77d>] do_sys_open+0x5c/0x123 [ 72.527247] [<ffffffff810cc86d>] sys_open+0x1b/0x1d [ 72.527247] [<ffffffff81002aab>] system_call_fastpath+0x16/0x1b [ 72.527247] Code: 02 98 00 00 00 3e 48 89 c8 f7 e2 48 8d 7a 01 e8 b8 ff ff ff c9 c3 55 48 89 e5 50 65 8b 34 25 b0 cd 00 00 66 66 90 0f ae e8 0f 31 <41> 89 c0 66 66 90 0f ae e8 0f 31 89 c0 4c 29 c0 48 39 f8 73 20 [ 72.527247] Call Trace: [ 72.527247] <#DB[1]> <<EOE>> Pid: 3152, comm: irqbalance Not tainted 2.6.32-mm1 #8 [ 72.527247] Call Trace: [ 72.527247] <NMI> [<ffffffff81001098>] ? show_regs+0x23/0x27 [ 72.527247] [<ffffffff81385175>] nmi_watchdog_tick+0xc9/0x1ad [ 72.527247] [<ffffffff813846b0>] do_nmi+0xa7/0x256 [ 72.527247] [<ffffffff8138433a>] nmi+0x1a/0x20 [ 72.527247] [<ffffffff811a134a>] ? delay_tsc+0x15/0x4c [ 72.527247] <<EOE>> [<ffffffff811a12f5>] __delay+0xa/0xc [ 72.527247] [<ffffffff811a572f>] _raw_spin_lock+0xbc/0x125 [ 72.527247] [<ffffffff81383af9>] _spin_lock+0x9/0xb [ 72.527247] [<ffffffff810ce929>] file_move+0x1e/0x4d [ 72.527247] [<ffffffff810cd033>] __dentry_open+0x17e/0x2ef [ 72.527247] [<ffffffff810cd26e>] nameidata_to_filp+0x3e/0x4f [ 72.527247] [<ffffffff810d8bd5>] do_filp_open+0x529/0x972 [ 72.527247] [<ffffffff8105935b>] ? hrtimer_cancel+0x11/0x1d [ 72.527247] [<ffffffff811a1fa3>] ? __strncpy_from_user+0x2b/0x55 [ 72.527247] [<ffffffff81383b04>] ? _spin_unlock+0x9/0xb [ 72.527247] [<ffffffff810e2520>] ? alloc_fd+0x111/0x121 [ 72.527247] [<ffffffff810cc77d>] do_sys_open+0x5c/0x123 [ 72.527247] [<ffffffff810cc86d>] sys_open+0x1b/0x1d [ 72.527247] [<ffffffff81002aab>] system_call_fastpath+0x16/0x1b [ 72.527230] NMI backtrace for cpu 6 [ 72.527230] CPU 6 [ 72.527230] Process mingetty (pid: 4105, threadinfo ffff88024aac4000, task ffff880256e2f810) [ 72.527230] Stack: [ 72.527230] ffffffff811a12f5 ffff88024aac5dc8 ffffffff811a572f 00007ffffbf94690 [ 72.527230] <0> 0000000000000000 000000000000033a ffffffff814ef5d0 ffff88024aac5e08 [ 72.527230] <0> ffffffff81383e0a ffff88025d5a3bc0 00007ffffbf94690 ffff88025d5a3bc0 [ 72.527230] Call Trace: [ 72.527230] [<ffffffff811a12f5>] ? __delay+0xa/0xc [ 72.527230] [<ffffffff811a572f>] _raw_spin_lock+0xbc/0x125 [ 72.527230] [<ffffffff81383e0a>] _lock_kernel+0x63/0x7c [ 72.527230] [<ffffffff81101396>] __posix_lock_file+0x79/0x40e [ 72.527230] [<ffffffff811018bf>] posix_lock_file+0x11/0x13 [ 72.527230] [<ffffffff811018ec>] vfs_lock_file+0x2b/0x2d [ 72.527230] [<ffffffff81101ad4>] fcntl_setlk+0x139/0x278 [ 72.527230] [<ffffffff810da34c>] sys_fcntl+0x2ef/0x4a7 [ 72.527230] [<ffffffff81002aab>] system_call_fastpath+0x16/0x1b [ 72.527230] Code: 48 8b 04 c5 60 85 86 81 48 c7 c2 c0 31 01 00 48 89 e5 48 6b 94 02 98 00 00 00 3e 48 89 c8 f7 e2 48 8d 7a 01 e8 b8 ff ff ff c9 c3 <55> 48 89 e5 50 65 8b 34 25 b0 cd 00 00 66 66 90 0f ae e8 0f 31 [ 72.527230] Call Trace: [ 72.527230] <#DB[1]> <<EOE>> Pid: 4105, comm: mingetty Not tainted 2.6.32-mm1 #8 [ 72.527230] Call Trace: [ 72.527230] <NMI> [<ffffffff81001098>] ? show_regs+0x23/0x27 [ 72.527230] [<ffffffff81385175>] nmi_watchdog_tick+0xc9/0x1ad [ 72.527230] [<ffffffff813846b0>] do_nmi+0xa7/0x256 [ 72.527230] [<ffffffff8138433a>] nmi+0x1a/0x20 [ 72.527230] [<ffffffff811a1335>] ? delay_tsc+0x0/0x4c [ 72.527230] <<EOE>> [<ffffffff811a12f5>] ? __delay+0xa/0xc [ 72.527230] [<ffffffff811a572f>] _raw_spin_lock+0xbc/0x125 [ 72.527230] [<ffffffff81383e0a>] _lock_kernel+0x63/0x7c [ 72.527230] [<ffffffff81101396>] __posix_lock_file+0x79/0x40e [ 72.527230] [<ffffffff811018bf>] posix_lock_file+0x11/0x13 [ 72.527230] [<ffffffff811018ec>] vfs_lock_file+0x2b/0x2d [ 72.527230] [<ffffffff81101ad4>] fcntl_setlk+0x139/0x278 [ 72.527230] [<ffffffff810da34c>] sys_fcntl+0x2ef/0x4a7 [ 72.527230] [<ffffffff81002aab>] system_call_fastpath+0x16/0x1b [ 72.527211] NMI backtrace for cpu 1 [ 72.527230] INFO: RCU detected CPU 6 stall (t=2500 jiffies) [ 72.527211] CPU 1 [ 72.527211] Process hald-addon-stor (pid: 3999, threadinfo ffff88025235c000, task ffff880256e2a080) [ 72.527211] Stack: [ 72.527211] 0000000000000000 ffff88025235dd08 ffffffff811a12f5 ffff88025235dd38 [ 72.527211] <0> ffffffff811a572f ffff88025d47ad10 ffff88025d4fd7c0 0000000000000000 [ 72.527211] <0> ffff8802583c78d0 ffff88025235dd48 ffffffff81383af9 ffff88025235dd68 [ 72.527211] Call Trace: [ 72.527211] [<ffffffff811a12f5>] __delay+0xa/0xc [ 72.527211] [<ffffffff811a572f>] _raw_spin_lock+0xbc/0x125 [ 72.527211] [<ffffffff81383af9>] _spin_lock+0x9/0xb [ 72.527211] [<ffffffff810ce929>] file_move+0x1e/0x4d [ 72.527211] [<ffffffff810cd033>] __dentry_open+0x17e/0x2ef [ 72.527211] [<ffffffff810cd26e>] nameidata_to_filp+0x3e/0x4f [ 72.527211] [<ffffffff810d8bd5>] do_filp_open+0x529/0x972 [ 72.527211] [<ffffffff81383b04>] ? _spin_unlock+0x9/0xb [ 72.527211] [<ffffffff811a1fa3>] ? __strncpy_from_user+0x2b/0x55 [ 72.527211] [<ffffffff81383b04>] ? _spin_unlock+0x9/0xb [ 72.527211] [<ffffffff810e2520>] ? alloc_fd+0x111/0x121 [ 72.527211] [<ffffffff810cc77d>] do_sys_open+0x5c/0x123 [ 72.527211] [<ffffffff810cc86d>] sys_open+0x1b/0x1d [ 72.527211] [<ffffffff81002aab>] system_call_fastpath+0x16/0x1b [ 72.527211] Code: 7a 01 e8 b8 ff ff ff c9 c3 55 48 89 e5 50 65 8b 34 25 b0 cd 00 00 66 66 90 0f ae e8 0f 31 41 89 c0 66 66 90 0f ae e8 0f 31 89 c0 <4c> 29 c0 48 39 f8 73 20 f3 90 65 8b 0c 25 b0 cd 00 00 39 ce 74 [ 72.527211] Call Trace: [ 72.527211] <#DB[1]> <<EOE>> Pid: 3999, comm: hald-addon-stor Not tainted 2.6.32-mm1 #8 [ 72.527211] Call Trace: [ 72.527211] <NMI> [<ffffffff81001098>] ? show_regs+0x23/0x27 [ 72.527211] [<ffffffff81385175>] nmi_watchdog_tick+0xc9/0x1ad [ 72.527211] [<ffffffff813846b0>] do_nmi+0xa7/0x256 [ 72.527211] [<ffffffff8138433a>] nmi+0x1a/0x20 [ 72.527211] [<ffffffff811a1357>] ? delay_tsc+0x22/0x4c [ 72.527211] <<EOE>> [<ffffffff811a12f5>] __delay+0xa/0xc [ 72.527211] [<ffffffff811a572f>] _raw_spin_lock+0xbc/0x125 [ 72.527211] [<ffffffff81383af9>] _spin_lock+0x9/0xb [ 72.527211] [<ffffffff810ce929>] file_move+0x1e/0x4d [ 72.527211] [<ffffffff810cd033>] __dentry_open+0x17e/0x2ef [ 72.527211] [<ffffffff810cd26e>] nameidata_to_filp+0x3e/0x4f [ 72.527211] [<ffffffff810d8bd5>] do_filp_open+0x529/0x972 [ 72.527211] [<ffffffff81383b04>] ? _spin_unlock+0x9/0xb [ 72.527211] [<ffffffff811a1fa3>] ? __strncpy_from_user+0x2b/0x55 [ 72.527211] [<ffffffff81383b04>] ? _spin_unlock+0x9/0xb [ 72.527211] [<ffffffff810e2520>] ? alloc_fd+0x111/0x121 [ 72.527211] [<ffffffff810cc77d>] do_sys_open+0x5c/0x123 [ 72.527211] [<ffffffff810cc86d>] sys_open+0x1b/0x1d [ 72.527211] [<ffffffff81002aab>] system_call_fastpath+0x16/0x1b
Quoted 3 lines · Andrew Morton
Have a trace. I'm actually wondering if perhaps there's a missing
unlock_kernel()somewhere else, and the tty code is just the victim of that.
Unlikely i'd say. I have 1000+ successful overnight tests on the latest tree Linus pushed out:
3ef884b: Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/d
So that's a guaranteed 'good' kernel.
The moment i merged 053fe57 into -tip the lockups started, so that's a guaranteed 'bad' kernel. There's only the TTY changes between those two points that look remotely related.
It's spurious though so quite hard to bisect. I tried one bisection today already and it got on the wrong track. I'll do a brute-force revert of the commits i quoted, lets see what happens.
Ingo
Quoted 14 lines · Ingo Molnar
Quoted 3 lines · Andrew Morton
Have a trace. I'm actually wondering if perhaps there's a missing
unlock_kernel()somewhere else, and the tty code is just the victim of that.Unlikely i'd say. I have 1000+ successful overnight tests on the latest tree Linus pushed out:
3ef884b: Merge branch 'drm-linus' of
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/dSo that's a guaranteed 'good' kernel.
Quoted 7 lines
The moment i merged 053fe57 into -tip the lockups started, so that's a guaranteed 'bad' kernel. There's only the TTY changes between those two points that look remotely related.
It's spurious though so quite hard to bisect. I tried one bisection today already and it got on the wrong track. I'll do a brute-force revert of the commits i quoted, lets see what happens.
i'm testing the series of 5 reverts below. It's looking good so far. You might want to try them - how quickly can you reproduce the hangs?
Ingo
--------------->
Quoted 1 line
From
95b532d4e2f9a82c1dedf7ea4a6c2702402237e6Mon Sep 17 00:00:00 2001
From: Ingo Molnar <[email protected]>
Date: Sat, 12 Dec 2009 11:08:04 +0100
Subject: [PATCH] Revert "tty: push the BKL down into the handlers a bit"
This reverts commit eeb89d918c2fa2b809e464136bbafdaec2aacb30.
drivers/char/pty.c +1 -1
@@ -659,7 +659,7 @@ static int __ptmx_open(struct inode *inode, struct file *filp)if (!retval)return 0 ; out1: -tty_release (inode, filp); +tty_release_dev (filp);return retval; out:devpts_kill_index (inode, index);
drivers/char/tty_io.c +61 -80
357 lines not on this page · raw message
drivers/char/tty_ldisc.c +0 -13
@@ -34,8 +34,6 @@#include <linux/vt_kern.h> #include <linux/selection.h> -#include <linux/smp_lock.h> /* For the moment */ -#include <linux/kmod.h> #include <linux/nsproxy.h>
@@ -547,7 +545,6 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)if (IS_ERR (new_ldisc))return PTR_ERR (new_ldisc); -lock_kernel ();/* * We need to look at the tty locking here for pty/tty pairs * when both sides try to change in parallel.
@@ -561,7 +558,6 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)*/ if (tty->ldisc->ops->num == ldisc) { -unlock_kernel ();tty_ldisc_put (new_ldisc);return 0 ; }
@@ -573,7 +569,6 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)tty_wait_until_sent (tty,0 ); -unlock_kernel ();mutex_lock (&tty->ldisc_mutex);/*
@@ -587,9 +582,6 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0);mutex_lock (&tty->ldisc_mutex); } - -lock_kernel (); -set_bit (TTY_LDISC_CHANGING , &tty->flags);/*
@@ -600,8 +592,6 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) tty->receive_room =0 ; o_ldisc = tty->ldisc; - -unlock_kernel ();/* * Make sure we don't change while someone holds a * reference to the line discipline. The TTY_LDISC bit
@@ -627,14 +617,12 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)flush_scheduled_work ();mutex_lock (&tty->ldisc_mutex); -lock_kernel ();if (test_bit (TTY_HUPPED , &tty->flags)) {/* We were raced by the hangup method. It will have stomped the ldisc data and closed the ldisc down */ clear_bit (TTY_LDISC_CHANGING , &tty->flags);mutex_unlock (&tty->ldisc_mutex);tty_ldisc_put (new_ldisc); -unlock_kernel ();return -EIO ; }
@@ -676,7 +664,6 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)if (o_work)schedule_delayed_work (&o_tty->buf.work,1 );mutex_unlock (&tty->ldisc_mutex); -unlock_kernel ();return retval; }
include/linux/tty.h +1 -1
@@ -449,7 +449,7 @@ extern void initialize_tty_struct(struct tty_struct *tty, struct tty_driver *driver, int idx);extern struct tty_struct *tty_init_dev (struct tty_driver *driver,int idx,int first_ok); -extern int tty_release (struct inode *inode,struct file *filp); +extern void tty_release_dev (struct file *filp);extern int tty_init_termios (struct tty_struct *tty);extern struct tty_struct *tty_pair_get_tty (struct tty_struct *tty);
Quoted 1 line
From
bd9a619494c123470a081e5e30602c307de2bba3Mon Sep 17 00:00:00 2001
From: Ingo Molnar <[email protected]>
Date: Sat, 12 Dec 2009 11:07:55 +0100
Subject: [PATCH] Revert "tty: Push the lock down further into the ldisc code"
This reverts commit f18f9498e90327b9b0e245e191029e6e1996d203.
drivers/char/tty_io.c +2 -0
@@ -1347,7 +1347,9 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,* If we fail here just call release_tty to clean up. No need * to decrement the use counts, as release_tty doesn't care. */ +lock_kernel (); retval =tty_ldisc_setup (tty, tty->link); +unlock_kernel ();if (retval) goto release_mem_out;return tty;
drivers/char/tty_ldisc.c +3 -9
@@ -445,14 +445,8 @@ static void tty_set_termios_ldisc(struct tty_struct *tty, int num)static int tty_ldisc_open (struct tty_struct *tty,struct tty_ldisc *ld) {WARN_ON (test_and_set_bit (TTY_LDISC_OPEN , &tty->flags)); -if (ld->ops->open) { -int ret; -/* BKL here locks verus a hangup event */ -lock_kernel (); - ret = ld->ops->open (tty); -unlock_kernel (); -return ret; - } +if (ld->ops->open) +return ld->ops->open (tty);return 0 ; }
@@ -572,7 +566,6 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)return 0 ; } -unlock_kernel ();/* * Problem: What do we do if this blocks ? * We could deadlock here
@@ -580,6 +573,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)tty_wait_until_sent (tty,0 ); +unlock_kernel ();mutex_lock (&tty->ldisc_mutex);/*
Quoted 1 line
From
8e991a5112643a63820a1088860f0c7c869d6f25Mon Sep 17 00:00:00 2001
From: Ingo Molnar <[email protected]>
Date: Sat, 12 Dec 2009 11:07:46 +0100
Subject: [PATCH] Revert "tty: Push the bkl down a bit in the hangup code"
This reverts commit 38c70b27f9502c31c1d0c29676275f7362cdb0d9.
drivers/char/tty_io.c +2 -2
@@ -505,6 +505,8 @@ static void do_tty_hangup(struct work_struct *work)if (!tty)return ; +/* inuse_filps is protected by the single kernel lock */ +lock_kernel ();spin_lock (&redirect_lock);if (redirect && redirect->private_data == tty) {
@@ -513,8 +515,6 @@ static void do_tty_hangup(struct work_struct *work) }spin_unlock (&redirect_lock); -/* inuse_filps is protected by the single kernel lock */ -lock_kernel ();check_tty_count (tty,"do_tty_hangup" );file_list_lock ();/* This breaks for file handles being sent over AF_UNIX sockets ? */
Quoted 1 line
From
9d6d77b3c56e6c169e50b6bb9033e4a2e7d4ec71Mon Sep 17 00:00:00 2001
From: Ingo Molnar <[email protected]>
Date: Sat, 12 Dec 2009 11:07:38 +0100
Subject: [PATCH] Revert "tty: Move the leader test in disassociate"
This reverts commit 5ec93d1154fd1e269162398f8e70efc7e004485d.
drivers/char/tty_io.c +2 -3
@@ -707,8 +707,6 @@ void disassociate_ctty(int on_exit)struct tty_struct *tty;struct pid *tty_pgrp =NULL ; -if (!current->signal->leader) -return ; tty =get_current_tty ();if (tty) {
@@ -774,7 +772,8 @@ void no_tty(void) {struct task_struct *tsk = current;lock_kernel (); -disassociate_ctty (0 ); +if (tsk->signal->leader) +disassociate_ctty (0 );unlock_kernel ();proc_clear_tty (tsk); }
kernel/exit.c +1 -1
@@ -971,7 +971,7 @@ NORET_TYPE void do_exit(long code)exit_thread ();cgroup_exit (tsk,1 ); -if (group_dead) +if (group_dead && tsk->signal->leader)disassociate_ctty (1 );module_put (task_thread_info (tsk)->exec_domain->module);
Quoted 1 line
From
153d2afe47cc994d35adc7e61be13bf840fd0b47Mon Sep 17 00:00:00 2001
From: Ingo Molnar <[email protected]>
Date: Sat, 12 Dec 2009 11:07:28 +0100
Subject: [PATCH] Revert "tty: split the lock up a bit further"
This reverts commit 36ba782e9674cdc29ec7003757df0b375e99fa96.
drivers/char/tty_io.c +0 -3
@@ -516,8 +516,6 @@ static void do_tty_hangup(struct work_struct *work)/* inuse_filps is protected by the single kernel lock */ lock_kernel ();check_tty_count (tty,"do_tty_hangup" ); -unlock_kernel (); -file_list_lock ();/* This breaks for file handles being sent over AF_UNIX sockets ? */ list_for_each_entry (filp, &tty->tty_files, f_u.fu_list) {
@@ -531,7 +529,6 @@ static void do_tty_hangup(struct work_struct *work) }file_list_unlock (); -lock_kernel ();tty_ldisc_hangup (tty);read_lock (&tasklist_lock);
Andrew Morton
maintainerQuoted 2 lines · On Sat, 12 Dec 2009 11:15:51 +0100 Ingo Molnar <[email protected]> wrote:
i'm testing the series of 5 reverts below. It's looking good so far. You might want to try them - how quickly can you reproduce the hangs?
Immediately, with http://userweb.kernel.org/~akpm/config-akpm2.txt
Quoted 6 lines · Andrew Morton
Quoted 2 lines · On Sat, 12 Dec 2009 11:15:51 +0100 Ingo Molnar <[email protected]> wrote:
i'm testing the series of 5 reverts below. It's looking good so far. You might want to try them - how quickly can you reproduce the hangs?
Immediately, with http://userweb.kernel.org/~akpm/config-akpm2.txt
Ok. The lockups i saw went away with the 5 reverts i posted. I'll keep testing that over the weekend - that should narrow down the range very precisely.
Ingo
Quoted 1 line · Andrew Morton
Seems to be quite .config-dependent.
My theory is that it's a race and that it's thus timing dependent. TTY SMP details get stressed most during a particular point during bootup, when all the mingetty's are starting up all at once and race with each other.
If you are lucky to not hit the bug then, then the likelyhood is much lower later on.
It would be nice if Alan posted his TTY stress-testing code. It could potentially make this bug bisectable.
Ingo
Andrew Morton
maintainerQuoted 10 lines · On Sat, 12 Dec 2009 11:10:32 +0100 Ingo Molnar <[email protected]> wrote:
Quoted 1 line · Andrew Morton
Seems to be quite .config-dependent.
My theory is that it's a race and that it's thus timing dependent. TTY SMP details get stressed most during a particular point during bootup, when all the mingetty's are starting up all at once and race with each other.
Quoted 6 lines
If you are lucky to not hit the bug then, then the likelyhood is much lower later on.
It would be nice if Alan posted his TTY stress-testing code. It could potentially make this bug bisectable.
I'm surprised that lockdep didn't notice that ab/ba I thought I saw. Maybe the do_tty_hangup()->tty_fasync() never happens.
The machine I can reproduce this on is at work and I'm not, until Monday. I'd try removing the files_lock() calls from tty_io.c, see if that helps.
I had
[ 71.553228] Warning: dev (tty1) tty->count(7) != #fd's(6) in tty_release_dev
come out once, then it went away.
Quoted 15 lines · Andrew Morton
Quoted 13 lines · On Sat, 12 Dec 2009 11:10:32 +0100 Ingo Molnar <[email protected]> wrote:
Quoted 1 line · Andrew Morton
Seems to be quite .config-dependent.
My theory is that it's a race and that it's thus timing dependent. TTY SMP details get stressed most during a particular point during bootup, when all the mingetty's are starting up all at once and race with each other.
If you are lucky to not hit the bug then, then the likelyhood is much lower later on.
Quoted 6 lines
Quoted 3 lines
It would be nice if Alan posted his TTY stress-testing code. It could potentially make this bug bisectable.
I'm surprised that lockdep didn't notice that ab/ba I thought I saw. Maybe the do_tty_hangup()->tty_fasync() never happens.
The kernel lock cannot have any ABBA deadlocks.
If somebody blocks on another lock (after getting the kernel lock), the kernel lock will be dropped. So no ABBA.
Linus
Quoted 8 lines · Linus Torvalds
Quoted 3 lines
I'm surprised that lockdep didn't notice that ab/ba I thought I saw. Maybe the do_tty_hangup()->tty_fasync() never happens.
The kernel lock cannot have any ABBA deadlocks.
If somebody blocks on another lock (after getting the kernel lock), the kernel lock will be dropped. So no ABBA.
Oh, but it turns out that while there cannot be any ABBA deadlocks with sleeping locks, what the tty code does is invalid for _another_ reason:file_list_lock() is a spinlock. And that's a no-no.
You cannot take the kernel lock inside a spinlock. Ordering doesn't matter, there's no ABBA issues - it's simply invalid _regardless_ of any other use of that lock.
I think we could possibly add a "__might_sleep()" to _lock_kernel(). It doesn't really sleep, but it's invalid to take the kernel lock in an atomic region, so __might_sleep() might be the right thing anyway.
Linus
Quoted 3 lines
I think we could possibly add a "
__might_sleep()" to_lock_kernel(). It doesn't really sleep, but it's invalid to take the kernel lock in an atomic region, so__might_sleep()might be the right thing anyway.
It's only invalid if you don't already hold the lock. The old tty code worked because every path into tty_fasync already held the lock ! That specific case - taking it the first time should definitely __might_sleep().
Mind you it's probably still rather dumb and would be a good debugging aid for -next to be able to warn on all offences if only to catch this stuff for the future BKL removal work.
Alan
Quoted 5 lines · Alan Cox
Quoted 3 lines
I think we could possibly add a "
__might_sleep()" to_lock_kernel(). It doesn't really sleep, but it's invalid to take the kernel lock in an atomic region, so__might_sleep()might be the right thing anyway.It's only invalid if you don't already hold the lock.
True.
Quoted 3 lines
The old tty code worked because every path into
tty_fasyncalready held the lock ! That specific case - taking it the first time should definitely__might_sleep().
That would give us at least somewhat better debugging. And it's a very natural thing to do. IOW, just something like the appended.
But maybe it complains about valid (but unusual) things. For example, it's not strictly speaking _wrong_ to take the kernel lock while preemption is disabled, even though it's a really bad idea.
Anybody willing to be the guinea-pig?
Linus
--- lib/kernel_lock.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-)
lib/kernel_lock.c +3 -1
@@ -122,8 +122,10 @@ void __lockfunc _lock_kernel(const char *func, const char *file, int line)trace_lock_kernel (func, file, line); -if (likely (!depth)) +if (likely (!depth)) { +might_sleep ();__lock_kernel (); + } current->lock_depth = depth; }
Quoted 15 lines · Linus Torvalds
Quoted 5 lines · Alan Cox
Quoted 3 lines
I think we could possibly add a "
__might_sleep()" to_lock_kernel(). It doesn't really sleep, but it's invalid to take the kernel lock in an atomic region, so__might_sleep()might be the right thing anyway.It's only invalid if you don't already hold the lock.
True.
Quoted 3 lines
The old tty code worked because every path into
tty_fasyncalready held the lock ! That specific case - taking it the first time should definitely__might_sleep().
Quoted 8 lines
That would give us at least somewhat better debugging. And it's a very natural thing to do. IOW, just something like the appended.
But maybe it complains about valid (but unusual) things. For example, it's not strictly speaking _wrong_ to take the kernel lock while preemption is disabled, even though it's a really bad idea.
Anybody willing to be the guinea-pig?
Replaced my patch with yours and it works the same way (except for the PREEMPT=n case)
Quoted 23 lines
Linus
--- lib/kernel_lock.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-)lib/kernel_lock.c +3
-1@@ -122,8 +122,10 @@ void __lockfunc _lock_kernel(const char *func, const char *file, int line)trace_lock_kernel (func, file, line); -if (likely (!depth)) +if (likely (!depth)) { +might_sleep ();__lock_kernel (); + } current->lock_depth = depth; }
Quoted 7 lines · Thomas Gleixner
Quoted 2 lines
Anybody willing to be the guinea-pig?
Replaced my patch with yours and it works the same way (except for the PREEMPT=n case)
Acked-and-Tested-by Thomas Gleixner <[email protected]>
Ok, I also decided to just test it myself too (after applying the tty layer fix) and it doesn't seem to cause any problems, so I've committed it.
If there is dubious BKL usage that triggers the new might_sleep() warning (and it turns out that it's necessary and not really fixable), we can always just remove it again. But on the other hand, maybe it shows some other potential problems that should just be fixed.
We've had quite a bit of BKL work this merge-window. Maybe we'll even get rid of it one of these days. There are "only" about 600 instances of "lock_kernel()" in the tree right now ;)
Linus
Quoted 3 lines · Linus Torvalds
We've had quite a bit of BKL work this merge-window. Maybe we'll even get rid of it one of these days. There are "only" about 600 instances of "
lock_kernel()" in the tree right now ;)
I tend to use unlock_kernel() as the metric. (as it's more precisely greppable and it is also more indicative of the underlying complexity of locking, as it gets used more in more complex scenarios)
In the last ~4.5 years:
earth4:~/tip> git checkout v2.6.12
Date: Fri Jun 17 12:48:29 2005 -0700
earth4:~/tip> git grep -w unlock_kernel | wc -l
713
earth4:~/tip> git checkout linus
Date: Fri Dec 11 20:58:20 2009 -0800
earth4:~/tip> git grep -w unlock_kernel | wc -l
841
we grew the (absolute) number of BKL sites by ~15%. Certainly the kernel grew at a much faster rate, so the relative proportion of the BKL shrunk.
Also, a lot of BKL use was hidden before, and due to the BKL removal activities (by Thomas, Frederic, Jon, Alan and others) the remaining BKL using sites are a lot more well defined, a lot more isolated and thus a lot more removable than ever before.
Ingo
Quoted 7 lines
earth4:~/tip> git checkout linus
Date: Fri Dec 11 20:58:20 2009 -0800
earth4:~/tip> git grep -wunlock_kernel| wc -l
841we grew the (absolute) number of BKL sites by ~15%. Certainly the kernel grew at a much faster rate, so the relative proportion of the BKL shrunk.
Thats actually very misleading. The reason is we have created more lock/unlock points as we remove and drive down the lock.
By your metric the original SMP kernel was best - it had one of each 8)
Quoted 4 lines
Also, a lot of BKL use was hidden before, and due to the BKL removal activities (by Thomas, Frederic, Jon, Alan and others) the remaining BKL using sites are a lot more well defined, a lot more isolated and thus a lot more removable than ever before.
ioctl is almost done and I've gont some other random ones in my tree. lseek is close. At that point most of the nasties are squashed except tty.
We do have some remaining locking horrors some partly introduced by the finer locking work in the past including the rather nasty device unload/load v open file handle races.
Quoted 9 lines · Alan Cox
Quoted 7 lines
earth4:~/tip> git checkout linus
Date: Fri Dec 11 20:58:20 2009 -0800
earth4:~/tip> git grep -wunlock_kernel| wc -l
841we grew the (absolute) number of BKL sites by ~15%. Certainly the kernel grew at a much faster rate, so the relative proportion of the BKL shrunk.
Thats actually very misleading. [...]
Somewhat, so i qualified it with the next paragraph:
Quoted 4 lines
Quoted 4 lines
Also, a lot of BKL use was hidden before, and due to the BKL removal activities (by Thomas, Frederic, Jon, Alan and others) the remaining BKL using sites are a lot more well defined, a lot more isolated and thus a lot more removable than ever before.
Thanks,
Ingo
Quoted 8 lines · Ingo Molnar
In the last ~4.5 years:
earth4:~/tip> git checkout v2.6.12
Date: Fri Jun 17 12:48:29 2005 -0700
earth4:~/tip> git grep -wunlock_kernel| wc -l
713
Quoted 4 lines
earth4:~/tip> git checkout linus
Date: Fri Dec 11 20:58:20 2009 -0800
earth4:~/tip> git grep -wunlock_kernel| wc -l
841
Git hint of the day: you don't need to check out a kernel to do "git grep".
Do this:
git grep -w unlock_kernel v2.6.12 | wc
and it will JustWork(tm).
Quoted 4 lines
Also, a lot of BKL use was hidden before, and due to the BKL removal activities (by Thomas, Frederic, Jon, Alan and others) the remaining BKL using sites are a lot more well defined, a lot more isolated and thus a lot more removable than ever before.
That's the main thing. We've been pushing them down a lot.
We still have a few annoying core ones, though. I hate the execve() and file locking ones.
Linus
Quoted 16 lines · Linus Torvalds
Quoted 8 lines · Ingo Molnar
In the last ~4.5 years:
earth4:~/tip> git checkout v2.6.12
Date: Fri Jun 17 12:48:29 2005 -0700
earth4:~/tip> git grep -wunlock_kernel| wc -l
713Quoted 4 lines
earth4:~/tip> git checkout linus
Date: Fri Dec 11 20:58:20 2009 -0800
earth4:~/tip> git grep -wunlock_kernel| wc -l
841
Quoted 8 lines
Git hint of the day: you don't need to check out a kernel to do "git grep".
Do this:
git grep -w
unlock_kernelv2.6.12 | wcand it will JustWork(tm).
/me adds it to the metal toolbox
Quoted 9 lines
Quoted 4 lines
Also, a lot of BKL use was hidden before, and due to the BKL removal activities (by Thomas, Frederic, Jon, Alan and others) the remaining BKL using sites are a lot more well defined, a lot more isolated and thus a lot more removable than ever before.
That's the main thing. We've been pushing them down a lot.
We still have a few annoying core ones, though. I hate the
execve()and file locking ones.
When we did the BKL-as-a-mutex trick and let lockdep loose on it, three areas were particularly tricky: tty, reiser3 and NFS. tty and reiserfs should be ok now, but i havent seen much activity on the NFS front.
Ingo
Quoted 3 lines · Ingo Molnar
When we did the BKL-as-a-mutex trick and let lockdep loose on it, three areas were particularly tricky: tty, reiser3 and NFS. tty and reiserfs should be ok now, but i havent seen much activity on the NFS front.
I've got a couple of NFS bkl removal patches queued up that I'll send on to Linus today, but they will not suffice to fully remove BKL from the NFS code.
The main remaining problem area is that of file locking (i.e. anything that references inode->i_flock). I've started work on that, but a couple of higher interrupts have prevented me from pulling it all together in time for this merge window...
Trond
Quoted 5 lines · Trond Myklebust
The main remaining problem area is that of file locking (i.e. anything that references
inode->i_flock). I've started work on that, but a couple of higher interrupts have prevented me from pulling it all together in time for this merge window...
I'm pretty sure we've had at least two trees with the file locking code fixed, but NFS in a status of "unknown".
If I recall correctly, the file locking code itself is not that hard:
we've done it without the kernel lock in the past (long long ago), and the lock usage doesn't nest (or at least it didn't at some point back then ;). In fact, I think we even do the actual lock data structure allocations outside of the kernel lock exactly because we at one time had a patch that used a spinlock for protection of the lists.
(Again, not only my memory, but the code itself may have bitrotted in the meantime, of course).
Linus
Quoted 11 lines · Linus Torvalds
Quoted 5 lines · Trond Myklebust
The main remaining problem area is that of file locking (i.e. anything that references
inode->i_flock). I've started work on that, but a couple of higher interrupts have prevented me from pulling it all together in time for this merge window...I'm pretty sure we've had at least two trees with the file locking code fixed, but NFS in a status of "unknown".
Quoted 6 lines
If I recall correctly, the file locking code itself is not that hard:
we've done it without the kernel lock in the past (long long ago), and the lock usage doesn't nest (or at least it didn't at some point back then ;). In fact, I think we even do the actual lock data structure allocations outside of the kernel lock exactly because we at one time had a patch that used a spinlock for protection of the lists.
After the current set of patches, have been merged by you, the only stuff that will continue to rely on nested BKL will be lockd. I can fix that up in the next cycle.
Quoted 2 lines
(Again, not only my memory, but the code itself may have bitrotted in the meantime, of course).
Agreed. I'm not saying that it's hard. I'm just saying that I ran out of time due to other commitments.
Cheers
Trond
Quoted 37 lines · Ingo Molnar
Quoted 16 lines · Linus Torvalds
Quoted 8 lines · Ingo Molnar
In the last ~4.5 years:
earth4:~/tip> git checkout v2.6.12
Date: Fri Jun 17 12:48:29 2005 -0700
earth4:~/tip> git grep -wunlock_kernel| wc -l
713Quoted 4 lines
earth4:~/tip> git checkout linus
Date: Fri Dec 11 20:58:20 2009 -0800
earth4:~/tip> git grep -wunlock_kernel| wc -l
841Quoted 8 lines
Git hint of the day: you don't need to check out a kernel to do "git grep".
Do this:
git grep -w
unlock_kernelv2.6.12 | wcand it will JustWork(tm).
/me adds it to the metal toolbox
Quoted 7 lines
Quoted 4 lines
Also, a lot of BKL use was hidden before, and due to the BKL removal activities (by Thomas, Frederic, Jon, Alan and others) the remaining BKL using sites are a lot more well defined, a lot more isolated and thus a lot more removable than ever before.
That's the main thing. We've been pushing them down a lot.
Quoted 8 lines
Quoted 2 lines
We still have a few annoying core ones, though. I hate the
execve()and file locking ones.When we did the BKL-as-a-mutex trick and let lockdep loose on it, three areas were particularly tricky: tty, reiser3 and NFS. tty and reiserfs should be ok now, but i havent seen much activity on the NFS front.
Ingo
Nfs was a problem in the BKL-as-a-mutex tree because it is acquired recursively and then locked up. And I suspect this recursion happens only on mount time because vfs acquires it too there.
But looking at it more closely, it doesn't look that dramatic at a first glance.
git-grep unlock_kernel fs/nfs
fs/nfs/callback.c: unlock_kernel(); fs/nfs/callback.c: unlock_kernel();
In nfs4_callback_svc() it embraces the socket
listening/processing callback thread.
svc_recv() might sleep so the bkl can be
lost in the middle.
And then svc_process().
This doesn't seem to protect anything there.
In nfs4_callback_svc() it's about the same thing, plus a list manipulation but protected by a spinlock.
fs/nfs/delegation.c: unlock_kernel(); fs/nfs/delegation.c: unlock_kernel(); fs/nfs/nfs4state.c: unlock_kernel(); fs/nfs/nfs4state.c: unlock_kernel();
In the above cases we have the following comment:
/* Protect inode->i_flock using the BKL */
And really it doesn't seem to protect anything else, fortunately it is acquired in a short path.
fs/nfs/super.c: unlock_kernel();fs/nfs/super.c: unlock_kernel();
Protect the mount/unmount path, a bit trickier there.
But really that looks way much easier to fix than it was with reiserfs.
Quoted 6 lines · Frederic Weisbecker
In the above cases we have the following comment:
/* Protect
inode->i_flockusing the BKL */And really it doesn't seem to protect anything else, fortunately it is acquired in a short path.
As I said in my reply, this is the tough one, because the BKL protection is imposed by the VFS locking scheme used in fs/locks.c.
There is a similar dependency imposed upon fs/lockd/
I'm working on this, but I don't have anything ready for 2.6.33.
Quoted 7 lines
fs/nfs/super.c:unlock_kernel();fs/nfs/super.c:unlock_kernel();Protect the mount/unmount path, a bit trickier there.
But really that looks way much easier to fix than it was with reiserfs.
All the other cases you list should be fixed in the GIT PULL request that I just put out.
Trond
Quoted 5 lines · Trond Myklebust
Quoted 4 lines · Frederic Weisbecker
In the above cases we have the following comment:
/* Protect
inode->i_flockusing the BKL */
Quoted 7 lines
Quoted 2 lines
And really it doesn't seem to protect anything else, fortunately it is acquired in a short path.
As I said in my reply, this is the tough one, because the BKL protection is imposed by the VFS locking scheme used in
fs/locks.c.There is a similar dependency imposed upon
fs/lockd/
Ok.
Quoted 11 lines
Quoted 7 lines
fs/nfs/super.c:unlock_kernel();fs/nfs/super.c:unlock_kernel();Protect the mount/unmount path, a bit trickier there.
But really that looks way much easier to fix than it was with reiserfs.
All the other cases you list should be fixed in the GIT PULL request that I just put out.
Cool, thanks a lot!
Quoted 5 lines · Trond Myklebust
Quoted 4 lines · Frederic Weisbecker
In the above cases we have the following comment:
/* Protect
inode->i_flockusing the BKL */
Quoted 7 lines
Quoted 2 lines
And really it doesn't seem to protect anything else, fortunately it is acquired in a short path.
As I said in my reply, this is the tough one, because the BKL protection is imposed by the VFS locking scheme used in
fs/locks.c.There is a similar dependency imposed upon
fs/lockd/
Note that since NFS seems to be the only one who really cares, I think the appropriate course of action is to just replace the BKL - preferably with a spinlock that you just drop before you do anything that blocks.
Not only does the BKL already do that (so the locking doesn't change), but I think most _users_ of the BKL actually already do the explicit dropping of the lock (rather than the implicit one done by schedule()) because it's already been a scalability issue and we've had some history of trying alternative approaches that didn't do that whole auto-dropping anyway (whether those alternate approaches be semaphores or spinlocks).
So don't worry about the "imposed by the VFS" thing. I think you can fairly easily change the VFS side.
Linus
Quoted 27 lines · Linus Torvalds
Quoted 5 lines · Trond Myklebust
Quoted 4 lines · Frederic Weisbecker
In the above cases we have the following comment:
/* Protect
inode->i_flockusing the BKL */Quoted 7 lines
Quoted 2 lines
And really it doesn't seem to protect anything else, fortunately it is acquired in a short path.
As I said in my reply, this is the tough one, because the BKL protection is imposed by the VFS locking scheme used in
fs/locks.c.There is a similar dependency imposed upon
fs/lockd/Note that since NFS seems to be the only one who really cares, I think the appropriate course of action is to just replace the BKL - preferably with a spinlock that you just drop before you do anything that blocks.
Not only does the BKL already do that (so the locking doesn't change), but I think most _users_ of the BKL actually already do the explicit dropping of the lock (rather than the implicit one done by
schedule()) because it's already been a scalability issue and we've had some history of trying alternative approaches that didn't do that whole auto-dropping anyway (whether those alternate approaches be semaphores or spinlocks).
Quoted 2 lines
So don't worry about the "imposed by the VFS" thing. I think you can fairly easily change the VFS side.
That comment applies to the NFSv4 code, which applies the BKL only because we need to traverse the inode->i_flock list. There is no recursive use of the BKL there, and we can trivially replace it with whichever new lock that that is chosen to replace the BKL in fs/locks.c.
To fix the lockd module, we have to backport some of the lessons we learned when writing the NFSv4 file locking code. It won't be a huge job, but I'd feel uncomfortable if I were to do it in a hurry just in order to meet the merge window deadline.
Trond
Quoted 10 lines · On Sun, 13 Dec 2009 07:58:44 +0100 Ingo Molnar <[email protected]> wrote:
Quoted 3 lines · Linus Torvalds
We've had quite a bit of BKL work this merge-window. Maybe we'll even get rid of it one of these days. There are "only" about 600 instances of "
lock_kernel()" in the tree right now ;)I tend to use
unlock_kernel()as the metric. (as it's more precisely greppable and it is also more indicative of the underlying complexity of locking, as it gets used more in more complex scenarios)
another metric is... how many times do we take the BKL for some workload. (For example booting or compiling a kernel). A counter like "BKLs-per-second" would be nice to expose (and then we can track that number going up as a regression etc)
For me, a secondary metric would be "how many times do we depend on the magic auto-drop/reget behavior".. also easy to build a counter for.
Signature · 3 lines
Arjan van de Ven Intel Open Source Technology Centre For development, discussion and tips for power savings, visit http://www.lesswatts.org
Quoted 10 lines · Arjan van de Ven
Quoted 7 lines · On Sun, 13 Dec 2009 07:58:44 +0100 Ingo Molnar <[email protected]> wrote:
Quoted 3 lines · Linus Torvalds
We've had quite a bit of BKL work this merge-window. Maybe we'll even get rid of it one of these days. There are "only" about 600 instances of "
lock_kernel()" in the tree right now ;)
Quoted 8 lines
Quoted 3 lines
I tend to use
unlock_kernel()as the metric. (as it's more precisely greppable and it is also more indicative of the underlying complexity of locking, as it gets used more in more complex scenarios)another metric is... how many times do we take the BKL for some workload. (For example booting or compiling a kernel). A counter like "BKLs-per-second" would be nice to expose (and then we can track that number going up as a regression etc)
We have the bkl tracepoints for that, attaching an example below, blkdev_get/bkldev_put is among the highest consumer for me.
Then after we have (not sorted in order) tty, __blkdev_driver_ioctl(), etc...
# tracer: nop
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
hald-addon-stor-4285 [000] 413.952233: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [001] 413.969331: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [001] 413.969343: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 413.989339: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 413.989349: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [001] 413.992067: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [001] 415.953350: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [001] 415.970537: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [001] 415.970552: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 415.990404: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 415.990414: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [001] 415.993139: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
less-5147 [001] 416.155702: lock_kernel: depth=0 file:line=drivers/char/tty_io.c:1847 func=tty_open()
less-5147 [001] 416.155712: unlock_kernel: depth=-1 file:line=drivers/char/tty_io.c:1849 func=tty_open()
lesspipe-5149 [001] 416.159402: lock_kernel: depth=0 file:line=drivers/char/tty_io.c:1847 func=tty_open()
lesspipe-5149 [001] 416.159412: unlock_kernel: depth=-1 file:line=drivers/char/tty_io.c:1849 func=tty_open()
lesspipe-5149 [001] 416.159418: lock_kernel: depth=0 file:line=drivers/char/tty_io.c:1870 func=tty_release()
lesspipe-5149 [001] 416.159419: lock_kernel: depth=1 file:line=drivers/char/tty_io.c:1911 func=tty_fasync()
lesspipe-5149 [001] 416.159421: unlock_kernel: depth=0 file:line=drivers/char/tty_io.c:1943 func=tty_fasync()
lesspipe-5149 [001] 416.159423: unlock_kernel: depth=-1 file:line=drivers/char/tty_io.c:1872 func=tty_release()
less-5147 [001] 420.459944: lock_kernel: depth=0 file:line=drivers/char/tty_io.c:1870 func=tty_release()
less-5147 [001] 420.459949: lock_kernel: depth=1 file:line=drivers/char/tty_io.c:1911 func=tty_fasync()
less-5147 [001] 420.459954: unlock_kernel: depth=0 file:line=drivers/char/tty_io.c:1943 func=tty_fasync()
less-5147 [001] 420.459960: unlock_kernel: depth=-1 file:line=drivers/char/tty_io.c:1872 func=tty_release()
hald-addon-stor-4285 [001] 421.954357: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [001] 421.971499: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [001] 421.971510: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 421.991585: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 421.991604: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [001] 421.994321: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22215.805856: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22215.823023: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22215.823035: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22215.842989: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22215.843001: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22215.845718: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22217.805987: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22217.823165: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22217.823178: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22217.843182: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22217.843194: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [001] 22217.845932: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
less-10802 [000] 22218.162060: lock_kernel: depth=0 file:line=drivers/char/tty_io.c:1847 func=tty_open()
less-10802 [000] 22218.162078: unlock_kernel: depth=-1 file:line=drivers/char/tty_io.c:1849 func=tty_open()
lesspipe-10804 [001] 22218.169025: lock_kernel: depth=0 file:line=drivers/char/tty_io.c:1847 func=tty_open()
lesspipe-10804 [001] 22218.169043: unlock_kernel: depth=-1 file:line=drivers/char/tty_io.c:1849 func=tty_open()
lesspipe-10804 [001] 22218.169052: lock_kernel: depth=0 file:line=drivers/char/tty_io.c:1870 func=tty_release()
lesspipe-10804 [001] 22218.169054: lock_kernel: depth=1 file:line=drivers/char/tty_io.c:1911 func=tty_fasync()
lesspipe-10804 [001] 22218.169059: unlock_kernel: depth=0 file:line=drivers/char/tty_io.c:1943 func=tty_fasync()
lesspipe-10804 [001] 22218.169062: unlock_kernel: depth=-1 file:line=drivers/char/tty_io.c:1872 func=tty_release()
less-10802 [001] 22255.644555: lock_kernel: depth=0 file:line=drivers/char/tty_io.c:1870 func=tty_release()
less-10802 [001] 22255.644560: lock_kernel: depth=1 file:line=drivers/char/tty_io.c:1911 func=tty_fasync()
less-10802 [001] 22255.644565: unlock_kernel: depth=0 file:line=drivers/char/tty_io.c:1943 func=tty_fasync()
less-10802 [001] 22255.644571: unlock_kernel: depth=-1 file:line=drivers/char/tty_io.c:1872 func=tty_release()
hald-addon-stor-4285 [001] 22255.808942: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [001] 22255.826113: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [001] 22255.826126: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22255.846022: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22255.846034: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [001] 22255.848822: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
less-10810 [001] 22256.438465: lock_kernel: depth=0 file:line=drivers/char/tty_io.c:1847 func=tty_open()
less-10810 [001] 22256.438476: unlock_kernel: depth=-1 file:line=drivers/char/tty_io.c:1849 func=tty_open()
lesspipe-10812 [001] 22256.442197: lock_kernel: depth=0 file:line=drivers/char/tty_io.c:1847 func=tty_open()
lesspipe-10812 [001] 22256.442209: unlock_kernel: depth=-1 file:line=drivers/char/tty_io.c:1849 func=tty_open()
lesspipe-10812 [001] 22256.442215: lock_kernel: depth=0 file:line=drivers/char/tty_io.c:1870 func=tty_release()
lesspipe-10812 [001] 22256.442217: lock_kernel: depth=1 file:line=drivers/char/tty_io.c:1911 func=tty_fasync()
lesspipe-10812 [001] 22256.442220: unlock_kernel: depth=0 file:line=drivers/char/tty_io.c:1943 func=tty_fasync()
lesspipe-10812 [001] 22256.442223: unlock_kernel: depth=-1 file:line=drivers/char/tty_io.c:1872 func=tty_release()
less-10810 [001] 22288.556512: lock_kernel: depth=0 file:line=drivers/char/tty_io.c:1870 func=tty_release()
less-10810 [001] 22288.556518: lock_kernel: depth=1 file:line=drivers/char/tty_io.c:1911 func=tty_fasync()
less-10810 [001] 22288.556523: unlock_kernel: depth=0 file:line=drivers/char/tty_io.c:1943 func=tty_fasync()
less-10810 [001] 22288.556528: unlock_kernel: depth=-1 file:line=drivers/char/tty_io.c:1872 func=tty_release()
hald-addon-stor-4285 [001] 22289.811558: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [001] 22289.828644: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [001] 22289.828655: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22289.848642: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22289.848654: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [001] 22289.851377: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [001] 22291.811651: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [001] 22291.828861: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [001] 22291.828873: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22291.848808: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22291.848820: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [001] 22291.851539: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [001] 22293.811865: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [001] 22293.829005: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [001] 22293.829018: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22293.848924: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22293.848939: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [001] 22293.851648: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22295.812598: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22295.829710: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22295.829729: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22295.849774: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22295.849793: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22295.852533: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22297.812827: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [001] 22297.830066: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [001] 22297.830080: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22297.850050: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22297.850063: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [001] 22297.852787: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [001] 22299.813048: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [001] 22299.830191: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [001] 22299.830202: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22299.850124: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22299.850139: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [001] 22299.852861: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [001] 22301.813131: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22301.830331: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22301.830344: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22301.850322: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22301.850336: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22301.853056: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22303.813335: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [001] 22303.830509: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [001] 22303.830524: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22303.850524: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22303.850536: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [001] 22303.853252: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22305.812998: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [001] 22305.830173: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [001] 22305.830187: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22305.850228: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22305.850240: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [001] 22305.852977: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [001] 22307.813260: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [001] 22307.830358: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [001] 22307.830370: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22307.850336: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22307.850348: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [001] 22307.853092: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22309.812671: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [001] 22309.829824: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [001] 22309.829838: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22309.849862: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22309.849876: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [001] 22309.852593: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [001] 22311.813880: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [001] 22311.830955: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [001] 22311.830969: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22311.850934: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22311.850947: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22311.853683: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22313.813953: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22313.831033: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22313.831044: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22313.850994: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22313.851008: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22313.853724: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22315.814036: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22315.831141: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22315.831152: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22315.851149: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22315.851164: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22315.853885: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22317.814201: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22317.831298: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22317.831311: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22317.851279: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22317.851293: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22317.854013: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22319.814300: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22319.831452: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22319.831464: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22319.851428: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22319.851442: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22319.854164: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22321.814478: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22321.831562: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22321.831574: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22321.851544: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22321.851558: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22321.854283: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22323.814548: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22323.831653: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22323.831664: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22323.851570: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22323.851619: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22323.854349: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22325.814617: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22325.831827: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22325.831840: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22325.851802: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22325.851815: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22325.854538: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22327.814807: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22327.831958: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22327.831971: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22327.851955: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22327.851966: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22327.854674: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22329.814947: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22329.832137: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22329.832148: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22329.852105: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22329.852117: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22329.854842: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22331.815111: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22331.832302: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22331.832317: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22331.852379: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22331.852396: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22331.855122: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22333.814527: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22333.831013: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22333.831025: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22333.850780: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22333.850815: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [001] 22333.853545: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [001] 22335.814932: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22335.831815: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22335.831833: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22335.851497: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22335.851506: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22335.854229: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22337.816545: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22337.833716: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22337.833727: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22337.853705: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22337.853718: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22337.856494: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22339.815783: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22339.832582: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22339.832594: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22339.852607: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22339.852619: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22339.855342: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [001] 22341.815543: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [001] 22341.832662: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [001] 22341.832674: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22341.852565: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [001] 22341.852578: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [001] 22341.855297: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [001] 22343.816613: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22343.833956: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22343.833975: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22343.853966: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22343.853981: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22343.856700: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22345.816971: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22345.834130: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22345.834143: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22345.854081: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22345.854095: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22345.856815: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22347.817085: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22347.834270: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22347.834284: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22347.854281: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22347.854295: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22347.857011: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22349.817281: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22349.834499: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22349.834512: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22349.854373: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22349.854387: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22349.857103: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22351.817387: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22351.834567: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22351.834580: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22351.854612: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22351.854627: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22351.857350: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22353.817639: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22353.834644: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22353.834658: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22353.854721: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22353.854735: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22353.857476: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()
hald-addon-stor-4285 [000] 22355.817753: lock_kernel: depth=0 file:line=fs/block_dev.c:1192 func=__blkdev_get()
hald-addon-stor-4285 [000] 22355.834840: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1278 func=__blkdev_get()
hald-addon-stor-4285 [000] 22355.834854: lock_kernel: depth=0 file:line=block/ioctl.c:171 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22355.854832: unlock_kernel: depth=-1 file:line=block/ioctl.c:173 func=__blkdev_driver_ioctl()
hald-addon-stor-4285 [000] 22355.854852: lock_kernel: depth=0 file:line=fs/block_dev.c:1358 func=__blkdev_put()
hald-addon-stor-4285 [000] 22355.857591: unlock_kernel: depth=-1 file:line=fs/block_dev.c:1383 func=__blkdev_put()Quoted 23 lines · On Sun, 13 Dec 2009 20:16:08 +0100 Frederic Weisbecker <[email protected]>…
Quoted 15 lines · Arjan van de Ven
Quoted 11 lines · On Sun, 13 Dec 2009 07:58:44 +0100 Ingo Molnar <[email protected]> wrote:
Quoted 3 lines · Linus Torvalds
We've had quite a bit of BKL work this merge-window. Maybe we'll even get rid of it one of these days. There are "only" about 600 instances of "
lock_kernel()" in the tree right now ;)I tend to use
unlock_kernel()as the metric. (as it's more precisely greppable and it is also more indicative of the underlying complexity of locking, as it gets used more in more complex scenarios)Quoted 4 lines
another metric is... how many times do we take the BKL for some workload. (For example booting or compiling a kernel). A counter like "BKLs-per-second" would be nice to expose (and then we can track that number going up as a regression etc)
Quoted 2 lines
We have the bkl tracepoints for that, attaching an example below, blkdev_get/bkldev_put is among the highest consumer for me.
we have a trace, but not a number that anyone can just pull out without having to go through great lengths to set stuff up... (esp to capture a boot)...
Adding a counter always to the lock_kernel function should be fine instead...
Signature · 3 lines
Arjan van de Ven Intel Open Source Technology Centre For development, discussion and tips for power savings, visit http://www.lesswatts.org
Am Montag, 14. Dezember 2009 06:30:15 schrieb Arjan van de Ven:
Quoted 8 lines
Quoted 2 lines
We have the bkl tracepoints for that, attaching an example below, blkdev_get/bkldev_put is among the highest consumer for me.
we have a trace, but not a number that anyone can just pull out without having to go through great lengths to set stuff up... (esp to capture a boot)...
Adding a counter always to thelock_kernelfunction should be fine instead...
But don't we need to know how long it is held? If you just count you'll make code that drops it while it can look bad.
Regards
Oliver
Quoted 4 lines · On Mon, 14 Dec 2009 11:39:48 +0100 Oliver Neukum <[email protected]> wrote:
Am Montag, 14. Dezember 2009 06:30:15 schrieb Arjan van de Ven:
Quoted 3 lines
Quoted 2 lines
We have the bkl tracepoints for that, attaching an example below, blkdev_get/bkldev_put is among the highest consumer for me.
Quoted 8 lines
Quoted 5 lines
we have a trace, but not a number that anyone can just pull out without having to go through great lengths to set stuff up... (esp to capture a boot)...
Adding a counter always to thelock_kernelfunction should be fine instead...But don't we need to know how long it is held? If you just count you'll make code that drops it while it can look bad.
I think/hope we're well past that. At this point, just the act of taking it at all is bad.
Signature · 3 lines
Arjan van de Ven Intel Open Source Technology Centre For development, discussion and tips for power savings, visit http://www.lesswatts.org
Arnd Bergmann
maintainerQuoted 10 lines · On Monday 14 December 2009 05:30:15 Arjan van de Ven wrote:
Quoted 2 lines · On Sun, 13 Dec 2009 20:16:08 +0100 Frederic Weisbecker <[email protected]>…
We have the bkl tracepoints for that, attaching an example below, blkdev_get/bkldev_put is among the highest consumer for me.
we have a trace, but not a number that anyone can just pull out without having to go through great lengths to set stuff up... (esp to capture a boot)...
Adding a counter always to thelock_kernelfunction should be fine instead...
FWIW, I've hacked up some debugging logic in lib/kernel_lock.c to count and measure the BKL. If anyone is interested in this, I can bring the patch into a form that is usable. The output for a boot followed by building a kernel on a four-way box with today's git looks like:
fs/ioctl.c:51 vfs_ioctl,5672809,0,9,108968293432,40528 drivers/char/vt_ioctl.c:512 vt_ioctl,15615,0,45,7967944,16400928 fs/locks.c:826 __posix_lock_file,1272,0,57,2815752,2013920 sound/core/sound.c:175 snd_open,1201,0,0,3863432,0 fs/block_dev.c:1192 __blkdev_get,479,26,14,39860472,686636416 drivers/usb/core/devio.c:656 usbdev_open,240,0,0,1640792,0 drivers/usb/core/devio.c:1868 usbdev_ioctl,240,0,0,369368,0 fs/read_write.c:110 default_llseek,185,0,5,88048,669224 drivers/char/tty_io.c:1761 tty_open,136,0,11,2878344,249472048 fs/block_dev.c:1358 __blkdev_put,117,1,1,10654208,3840 drivers/char/tty_io.c:1882 tty_open,106,0,5,44344,32056 drivers/char/tty_io.c:1603 tty_release,99,0,3,363496,8192 drivers/char/tty_io.c:1513 tty_release,99,0,3,639200,104312 kernel/ptrace.c:610 sys_ptrace,98,0,0,588432,0 block/ioctl.c:171 __blkdev_driver_ioctl,40,0,4,2960544,69288 fs/locks.c:1188 __break_lease,25,0,0,14960,0 fs/namespace.c:1650 do_new_mount,14,1,0,403088,0 fs/locks.c:733 flock_lock_file,14,0,0,33072,0 fs/locks.c:2022 locks_remove_flock,9,0,0,17160,0 drivers/char/pty.c:673 ptmx_open,8,0,0,406200,0 drivers/input/input.c:1767 input_open_file,7,0,0,83776,0 drivers/char/tty_io.c:717 disassociate_ctty,5,0,1,2376,322352 lib/kernel_lock.c:236 stat_read,3,0,0,590328,0 kernel/trace/trace.c:721 register_tracer,3,0,1,2420999112,17296 fs/locks.c:647 posix_test_lock,3,0,0,6920,0 drivers/gpu/drm/drm_fops.c:176 drm_stub_open,2,0,0,16712,0 init/main.c:849 kernel_init,1,0,0,334951112,0 init/main.c:546 start_kernel,1,0,0,873891904,0 fs/ext3/super.c:2548 ext3_remount,1,0,0,86592,0 fs/ext3/super.c:2036 ext3_fill_super,1,1,0,2656,0 drivers/gpu/drm/drm_fops.c:473 drm_release,1,0,0,6360,0 block/ioctl.c:316 blkdev_ioctl,1,0,1,848,32352
The comma-separated fields are
1. caller location
2. number of lock_kernel() calls
3. number of times it was called with BKL held already
4. number of times it blocked
5. total time it was held in get_cycles() units, not counting time spent during release-on-sleep
6. total time that this lock_kernel() was blocked by another thread holding the BKL.
It would be easy to add some recording of who is nesting or blocking whom, or which ones call a function that might_sleep().
Arnd
Quoted 4 lines · Alan Cox
Quoted 3 lines
I think we could possibly add a "
__might_sleep()" to_lock_kernel(). It doesn't really sleep, but it's invalid to take the kernel lock in an atomic region, so__might_sleep()might be the right thing anyway.
Quoted 8 lines
It's only invalid if you don't already hold the lock. The old tty code worked because every path into
tty_fasyncalready held the lock ! That specific case - taking it the first time should definitely__might_sleep().Mind you it's probably still rather dumb and would be a good debugging aid for -next to be able to warn on all offences if only to catch this stuff for the future BKL removal work.
Just patched the following in and it catched your problem nicely. With your AB/BA fix patch applied everything is fine.
Thanks,
tglx
---
Subject: BKL: Add might sleep to __lock_kernel
From: Thomas Gleixner <[email protected]>
Date: Sat, 12 Dec 2009 20:29:00 +0100
Catches all offenders which take the BKL first time in an atomic region. Recursive lock_kernel calls are not affected.
--- lib/kernel_lock.c | 2 ++ 1 file changed, 2 insertions(+)
lib/kernel_lock.c +2 -0
@@ -64,6 +64,8 @@ void __lockfunc __release_kernel_lock(vo#ifdef CONFIG_PREEMPT static inline void __lock_kernel (void ) { +might_sleep (); +preempt_disable ();if (unlikely (!_raw_spin_trylock (&kernel_flag))) {/*
Quoted 3 lines · Thomas Gleixner
Just patched the following in and it catched your problem nicely. With your AB/BA fix patch applied everything is fine.
Actually, the patch I just suggested might be better. Admittedly the CONFIG_PREEMPT case is the more important one (and the one that will catch more cases), but even without preemptyion the might_sleep() in _lock_kernel() (one underscore) would trigger on the case of somebody doing lock_kernel with local interrupts disabled.
Linus
Quoted 10 lines · Linus Torvalds
Quoted 3 lines · Thomas Gleixner
Just patched the following in and it catched your problem nicely. With your AB/BA fix patch applied everything is fine.
Actually, the patch I just suggested might be better. Admittedly the
CONFIG_PREEMPTcase is the more important one (and the one that will catch more cases), but even without preemptyion themight_sleep()in_lock_kernel()(one underscore) would trigger on the case of somebody doinglock_kernelwith local interrupts disabled.
Fair enough.
tglx
Quoted 3 lines
The do_tty_hangup()->tty_fasync() path takes the locks in the file_list_lock()->lock_kernel() direction whereas most other code takes them in the other direction, which cannot be good. But I'm not sure
Thats a bug - the BKL does want to be taken first (and will sleep/yield/drop)
Quoted 3 lines
Have a trace. I'm actually wondering if perhaps there's a missing
unlock_kernel()somewhere else, and the tty code is just the victim of that.
It's introduced by the BKL shuffle. Try the following
commit 1f61f07a985c7e8cfc20ad8fcced2f3d226bd0dc
Author: Alan Cox <[email protected]> Date: Sat Dec 12 10:32:36 2009 +0000
tty: Fix the AB-BA locking bug introduced in the BKL split
The fasync path takes the BKL (it probably doesn't need to in fact) but this causes lock inversions and deadlocks so we can't do that. Leave the BKL over that bit for the moment.
Identified by AKPM.
drivers/char/tty_io.c +0 -2
@@ -516,7 +516,6 @@ static void do_tty_hangup(struct work_struct *work)/* inuse_filps is protected by the single kernel lock */ lock_kernel ();check_tty_count (tty,"do_tty_hangup" ); -unlock_kernel ();file_list_lock ();/* This breaks for file handles being sent over AF_UNIX sockets ? */
@@ -531,7 +530,6 @@ static void do_tty_hangup(struct work_struct *work) }file_list_unlock (); -lock_kernel ();tty_ldisc_hangup (tty);read_lock (&tasklist_lock);
Quoted 20 lines · Alan Cox
Quoted 3 lines
The do_tty_hangup()->tty_fasync() path takes the locks in the file_list_lock()->lock_kernel() direction whereas most other code takes them in the other direction, which cannot be good. But I'm not sure
Thats a bug - the BKL does want to be taken first (and will sleep/yield/drop)
Quoted 3 lines
Have a trace. I'm actually wondering if perhaps there's a missing
unlock_kernel()somewhere else, and the tty code is just the victim of that.It's introduced by the BKL shuffle. Try the following
commit
1f61f07a985c7e8cfc20ad8fcced2f3d226bd0dcAuthor: Alan Cox <[email protected]> Date: Sat Dec 12 10:32:36 2009 +0000tty: Fix the AB-BA locking bug introduced in the BKL split
Quoted 7 lines
The fasync path takes the BKL (it probably doesn't need to in fact) but this causes lock inversions and deadlocks so we can't do that. Leave the BKL over that bit for the moment.
Identified by AKPM.
Signed-off-by Alan Cox <[email protected]>
Quoted 21 lines
drivers/char/tty_io.c +0
-2@@ -516,7 +516,6 @@ static void do_tty_hangup(struct work_struct *work)/* inuse_filps is protected by the single kernel lock */ lock_kernel ();check_tty_count (tty,"do_tty_hangup" ); -unlock_kernel ();file_list_lock ();/* This breaks for file handles being sent over AF_UNIX sockets ? */ @@ -531,7 +530,6 @@ static void do_tty_hangup(struct work_struct *work) }file_list_unlock (); -lock_kernel ();tty_ldisc_hangup (tty);read_lock (&tasklist_lock);
Quoted 11 lines · On Sat, 12 Dec 2009 09:46:11 +0100 Ingo Molnar <[email protected]> wrote:
Quoted 1 line · Greg KH
Here's the big TTY patchset for your .33-git tree.
FYI, one of the changes in this tree is causing lockups on x86.
Config attached.
Possible suspects would one of these:
Quoted 7 lines
36ba782: tty: split the lock up a bit further 5ec93d1: tty: Move the leader test in disassociate 38c70b2: tty: Push the bkl down a bit in the hangup code
f18f949: tty: Push the lock down further into the ldisc code
eeb89d9: tty: push the BKL down into the handlers a bitas they deal with locking details and are fresher than two weeks.
Any diagnostics with the lockup or just a system hang ?
You can pop back those five and if the lockup then vanishes those are ones trying to work on hangup and BKL rather than security fixes so can just get punted to next release
Quoted 20 lines · Alan Cox
Quoted 17 lines · On Sat, 12 Dec 2009 09:46:11 +0100 Ingo Molnar <[email protected]> wrote:
Quoted 1 line · Greg KH
Here's the big TTY patchset for your .33-git tree.
FYI, one of the changes in this tree is causing lockups on x86.
Config attached.
Possible suspects would one of these:
36ba782: tty: split the lock up a bit further 5ec93d1: tty: Move the leader test in disassociate 38c70b2: tty: Push the bkl down a bit in the hangup code
f18f949: tty: Push the lock down further into the ldisc code
eeb89d9: tty: push the BKL down into the handlers a bit
Quoted 3 lines
Quoted 1 line
as they deal with locking details and are fresher than two weeks.
Any diagnostics with the lockup or just a system hang ?
None that i've captured (the hang is silent) but Andrew posted some.
Ingo