staging: s5k3e2fx.c: simplify complexity by factoring
PATCH 1/1 staging: s5k3e2fx.c: simplify complexity by factoring
the code was looping, seting s_move[i] to the following calculations
if (actual_step >= 0)
s_move[i] = ((((i + 1) * gain + 0x200) - (i * gain + 0x200)) / 0x400);
else
s_move[i] = ((((i + 1) * gain - 0x200) - (i * gain - 0x200)) / 0x400);but, this code redues to the expression
s_move[i] = gain >> 10;
The reason for the complexity was to generate a step function with integer division and rounding to land on specific values. But these calculations can be simplified to the following code:
gain = ((actual_step << 10) / 5) >> 10; for (i = 0; i <= 4; i++) s_move[i] = gain; --- drivers/staging/dream/camera/s5k3e2fx.c | 10 +++------- 1 files changed, 3 insertions(+), 7 deletions(-)
drivers/staging/dream/camera/s5k3e2fx.c +3 -7
@@ -1093,14 +1093,10 @@ static int32_t s5k3e2fx_move_focus(int direction, int32_t num_steps) actual_step = step_direction * (int16_t )num_steps; pos_offset = init_code + s5k3e2fx_ctrl->curr_lens_pos; - gain = actual_step *0x400 /5 ; + gain = ((actual_step <<10 ) /5 ) >>10 ; -for (i =0 ; i <=4 ; i++) { -if (actual_step >=0 ) - s_move[i] = ((((i+1 )*gain+0x200 ) - (i*gain+0x200 ))/0x400 ); -else - s_move[i] = ((((i+1 )*gain-0x200 ) - (i*gain-0x200 ))/0x400 ); - } +for (i =0 ; i <=4 ; i++) + s_move[i] = gain;/* Ring Damping Code */ for (i =0 ; i <=4 ; i++) {
Signature · 1 line
1.6.5.6
Quoted 44 lines · Justin Madru
the code was looping, seting s_move[i] to the following calculations
if (
actual_step>= 0)
s_move[i] = ((((i + 1) * gain +0x200) - (i * gain +0x200)) /0x400); else
s_move[i] = ((((i + 1) * gain -0x200) - (i * gain -0x200)) /0x400);but, this code redues to the expression
s_move[i] = gain >> 10;The reason for the complexity was to generate a step function with integer division and rounding to land on specific values. But these calculations can be simplified to the following code:
gain = ((
actual_step<< 10) / 5) >> 10; for (i = 0; i <= 4; i++)
s_move[i] = gain;
---
drivers/staging/dream/camera/s5k3e2fx.c | 10 +++-------1 files changed, 3 insertions(+), 7 deletions(-)drivers/staging/dream/camera/s5k3e2fx.c +3
-8@@ -1093,14 +1093,10 @@ static int32_t s5k3e2fx_move_focus(int direction, int32_t num_steps) actual_step = step_direction * (int16_t)num_steps; pos_offset = init_code + s5k3e2fx_ctrl->curr_lens_pos; - gain = actual_step * 0x400 / 5; + gain = ((actual_step << 10) / 5) >> 10; - for (i = 0; i <= 4; i++) { - if (actual_step >= 0) - s_move[i] = ((((i+1)*gain+0x200) - (i*gain+0x200))/0x400); - else - s_move[i] = ((((i+1)*gain-0x200) - (i*gain-0x200))/0x400); - } + for (i = 0; i <= 4; i++) + s_move[i] = gain; /* Ring Damping Code */ for (i = 0; i <= 4; i++) { --
Quoted 1 line
1.6.5.6
Okay, yes, that now generates the same numbers before and after.
More worryingly, however, it's now even more obvious that there's no need for a five-element array here to hold the steps. They're all the same size, so the array could have been removed along with the gain variable and the expression ((actual_step << 10) / 5) >> 10 can be used directly in at the top of the loop in the ring damping code directly below, the only place that uses the s_move[5] array.
(There's no point in having an array of move values unless the individual values differ, which makes the whole thing look like there's a bug in the code compared to the original intent of, perhaps, making large moves in the beginning and smaller toward the end. Dunno. This is one of those 'ask the author' sorts of things.)
Regardless, that's not your fault, and not something that has to be rolled into this patch, so feel free to add my
Quoted 10 lines · Justin Madru
the code was looping, seting s_move[i] to the following calculations
if (
actual_step>= 0)s_move[i] = ((((i + 1) * gain + 0x200) - (i * gain + 0x200)) / 0x400); else s_move[i] = ((((i + 1) * gain - 0x200) - (i * gain - 0x200)) / 0x400);but, this code redues to the expression
s_move[i] = gain >> 10;
Quoted 7 lines
The reason for the complexity was to generate a step function with integer division and rounding to land on specific values. But these calculations can be simplified to the following code:
gain = ((actual_step << 10) / 5) >> 10; for (i = 0; i <= 4; i++) s_move[i] = gain;
Care to resend this with a Signed-off-by: line, and add the reviewed-by line that was requested by Ray?
thanks,
greg k-h
Justin Madru
Reviewed-by Ray LeeQuoted 19 lines · Greg KH
Quoted 10 lines · Justin Madru
the code was looping, seting s_move[i] to the following calculations
if (actual_step>= 0)
s_move[i] = ((((i + 1) * gain + 0x200) - (i * gain + 0x200)) / 0x400); else s_move[i] = ((((i + 1) * gain - 0x200) - (i * gain - 0x200)) / 0x400);but, this code redues to the expression
s_move[i] = gain>> 10;Quoted 7 lines
The reason for the complexity was to generate a step function with integer division and rounding to land on specific values. But these calculations can be simplified to the following code:
gain = ((actual_step<< 10) / 5)>> 10; for (i = 0; i<= 4; i++) s_move[i] = gain;
Quoted 6 lines
Care to resend this with a Signed-off-by: line, and add the reviewed-by line that was requested by Ray?
thanks,
greg k-h
Sorry about that, new at submitting patches, don't completely know the flow yet. Does the below format work for you? Hopefully my email client won't mess the patch up.
Justin Madru
------
From: Justin Madru<[email protected]>
Date: Tue, 15 Dec 2009 12:27:31 -0800
Subject: [PATCH] staging: s5k3e2fx.c: simplify complexity by factoring
the code was looping, setting s_move[i] to the following calculations
if (actual_step>= 0)
s_move[i] = ((((i + 1) * gain + 0x200) - (i * gain + 0x200)) / 0x400);
else
s_move[i] = ((((i + 1) * gain - 0x200) - (i * gain - 0x200)) / 0x400);but, this code reduces to the expression
s_move[i] = gain>> 10;
The reason for the complexity was to generate a step function with integer division and rounding to land on specific values. But these calculations can be simplified to the following code:
gain = ((actual_step<< 10) / 5)>> 10; for (i = 0; i<= 4; i++) s_move[i] = gain;
--- drivers/staging/dream/camera/s5k3e2fx.c | 10 +++------- 1 files changed, 3 insertions(+), 7 deletions(-)
drivers/staging/dream/camera/s5k3e2fx.c +3 -7
@@ -1092,14 +1092,10 @@ static int32_t s5k3e2fx_move_focus(int direction, int32_t num_steps) actual_step = step_direction * (int16_t )num_steps; pos_offset = init_code + s5k3e2fx_ctrl->curr_lens_pos; - gain = actual_step *0x400 /5 ; + gain = ((actual_step<<10 ) /5 )>>10 ; -for (i =0 ; i<=4 ; i++) { -if (actual_step>=0 ) - s_move[i] = ((((i+1 )*gain+0x200 ) - (i*gain+0x200 ))/0x400 ); -else - s_move[i] = ((((i+1 )*gain-0x200 ) - (i*gain-0x200 ))/0x400 ); - } +for (i =0 ; i<=4 ; i++) + s_move[i] = gain;/* Ring Damping Code */ for (i =0 ; i<=4 ; i++) {
Signature · 1 line
1.6.5.6