Skip to contentSkip to conversation

lpfc 8.3.7: Fix NPIV operation errors

PATCH New James Smart 1 participant 1 message Dec 21, 2009

Subsystems (2)
SCSI Emulex/Broadcom lpfc FC/FCoE SCSI driver
lore
Share & tools
lore

James Smart

author
#0 lore raw

PATCH 2/6 lpfc 8.3.7: Fix NPIV operation errors

Fix NPIV operation errors:
- Fix vport not logging out of fabric when being deleted
- Fix vport fails to discover targets after devloss timeout.

Signed-off-by James Smart <[email protected]>

---

 drivers/scsi/lpfc/lpfc_els.c     |    2 +-
 drivers/scsi/lpfc/lpfc_hbadisc.c |    1 +
 drivers/scsi/lpfc/lpfc_vport.c   |    2 +-
 3 files changed, 3 insertions(+), 2 deletions(-)
drivers/scsi/lpfc/lpfc_els.c +1 -1
index ce52270..bb2e43a 100644
@@ -5948,8 +5948,8 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 				lpfc_initial_fdisc(vport);
 			break;
 		}
-
 	} else {
+		vport->vpi_state |= LPFC_VPI_REGISTERED;
 		if (vport == phba->pport)
 			if (phba->sli_rev < LPFC_SLI_REV4)
 				lpfc_issue_fabric_reglogin(vport);
drivers/scsi/lpfc/lpfc_hbadisc.c +1 -0
index 3b94244..401167d 100755
@@ -2260,6 +2260,7 @@ lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 		break;
 	}
 	vport->vpi_state &= ~LPFC_VPI_REGISTERED;
+	vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
 	vport->unreg_vpi_cmpl = VPORT_OK;
 	mempool_free(pmb, phba->mbox_mem_pool);
 	/*
drivers/scsi/lpfc/lpfc_vport.c +1 -1
index 7d6dd83..c3a70c4 100644
@@ -700,7 +700,7 @@ lpfc_vport_delete(struct fc_vport *fc_vport)
 			}
 			spin_unlock_irq(&phba->ndlp_lock);
 		}
-		if (vport->vpi_state != LPFC_VPI_REGISTERED)
+		if (!(vport->vpi_state & LPFC_VPI_REGISTERED))
 			goto skip_logo;
 		vport->unreg_vpi_cmpl = VPORT_INVAL;
 		timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
Signature · 1 line
1.6.5.2