Skip to contentSkip to conversation

Modify distro/minimal.conf to use glibc and add an eglibc-based minimal distribution

PATCH NAK Guo Hongruan 4 participants 8 messages Dec 22, 2009 – Dec 24, 2009

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Modify distro/minimal.conf to use glibc and add an eglibc-based minimal distribution

1. conf/distro/minimal-eglibc.conf: add minimal distribution based on eglibc.
2. conf/distro/minimal.conf: use glibc instead of eglibc

---
 conf/distro/minimal-eglibc.conf |   41 +++++++++++++++++++++++++++++++++++++++
 1 files changed, 41 insertions(+), 0 deletions(-)
 create mode 100644 conf/distro/minimal-eglibc.conf
conf/distro/minimal-eglibc.conf new file +41 -0
new file mode 100644
index 0000000..5ab275b
@@ -0,0 +1,41 @@
+#-----------------------------------------------------------------------------
+#@TYPE: Distribution
+#@NAME: Minimal uClibc
+#@DESCRIPTION: uClibc based Embedded Linux Distribution Configuration (minimal)
+#
+#@COMMENT: This distribution configuration serves as a starting point for
+#@COMMENT: the integration of new target platforms, machines, or distributions.
+#@COMMENT: It bases on conservative settings and should always be buildable.
+#-----------------------------------------------------------------------------
+
+#
+# Header
+#
+DISTRO_NAME = "minimal-eglibc"
+
+TARGET_FPU_arm = "soft"
+TARGET_FPU_armeb = "soft"
+
+LIBC = "eglibc"
+
+require conf/distro/minimal.conf
+
+# NOTE:
+#
+# We get the DISTRO_FEATURES defined in minimal.conf here but
+# however there are some features like mips -mplt support which
+# is not supported on uclibc yet so we need to disable that
+# feature for uclibc based distributions, therefore we redefine
+# the DISTRO_FEATURES for minimal-uclibc and notably leave mplt
+# out. Make sure that if there is a new DISTRO_FEATURE thats added
+# to minimal.conf will not get included in minimal-uclibc.conf
+# it has to be added to the below selection if it should also be
+# enabled for minimal-uclibc
+
+# FEATURE SELECTION
+#############################################################################
+# We want images supporting the following features (for task-base)
+DISTRO_FEATURES = "nfs smbfs wifi ppp alsa ext2 vfat pcmcia usbgadget usbhost pci"
+# Following features are for ARM and E500 based machines
+DISTRO_FEATURES += "eabi"
+
Signature · 1 line
1.5.4.3
#1 lore raw

PATCH 1/1 change uclibc to eglibc on comments

---
 conf/distro/minimal-eglibc.conf |   14 +++++++-------
 conf/distro/minimal.conf        |    2 +-
 2 files changed, 8 insertions(+), 8 deletions(-)
conf/distro/minimal-eglibc.conf +7 -7
index 5ab275b..10f271b 100644
@@ -1,7 +1,7 @@
 #-----------------------------------------------------------------------------
 #@TYPE: Distribution
-#@NAME: Minimal uClibc
-#@DESCRIPTION: uClibc based Embedded Linux Distribution Configuration (minimal)
+#@NAME: Minimal eglibc
+#@DESCRIPTION: eglibc based Embedded Linux Distribution Configuration (minimal)
 #
 #@COMMENT: This distribution configuration serves as a starting point for
 #@COMMENT: the integration of new target platforms, machines, or distributions.
@@ -24,13 +24,13 @@ require conf/distro/minimal.conf
 #
 # We get the DISTRO_FEATURES defined in minimal.conf here but
 # however there are some features like mips -mplt support which
-# is not supported on uclibc yet so we need to disable that
-# feature for uclibc based distributions, therefore we redefine
-# the DISTRO_FEATURES for minimal-uclibc and notably leave mplt
+# is not supported on eglibc yet so we need to disable that
+# feature for eglibc based distributions, therefore we redefine
+# the DISTRO_FEATURES for minimal-eglibc and notably leave mplt
 # out. Make sure that if there is a new DISTRO_FEATURE thats added
-# to minimal.conf will not get included in minimal-uclibc.conf
+# to minimal.conf will not get included in minimal-eglibc.conf
 # it has to be added to the below selection if it should also be
-# enabled for minimal-uclibc
+# enabled for minimal-eglibc
 
 # FEATURE SELECTION
 #############################################################################
conf/distro/minimal.conf +1 -1
index 00397db..d0ec876 100644
@@ -86,7 +86,7 @@ OVERRIDES = "local:${MACHINE}:${MACHINE_CLASS}:${DISTRO}:${TARGET_OS}:${TARGET_A
 #############################################################################
 # TOOLCHAIN
 #############################################################################
-LIBC ?= "eglibc"
+LIBC ?= "glibc"
 require conf/distro/include/sane-toolchain.inc
 
 #############################################################################
Signature · 1 line
1.5.4.3
#2 lore raw

Re: [PATCH] change uclibc to eglibc on comments

Quoted 43 lines · Guo Hongruan

---
 conf/distro/minimal-eglibc.conf |   14 +++++++------- conf/distro/minimal.conf        |    2 +-

 2 files changed, 8 insertions(+), 8 deletions(-)
conf/distro/minimal-eglibc.conf +7 -7
index 5ab275b..10f271b 100644
@@ -1,7 +1,7 @@
  #-----------------------------------------------------------------------------
  #@TYPE: Distribution
-#@NAME: Minimal uClibc
-#@DESCRIPTION: uClibc based Embedded Linux Distribution Configuration (minimal)
+#@NAME: Minimal eglibc
+#@DESCRIPTION: eglibc based Embedded Linux Distribution Configuration (minimal)
  #
  #@COMMENT: This distribution configuration serves as a starting point for
  #@COMMENT: the integration of new target platforms, machines, or distributions.
@@ -24,13 +24,13 @@ require conf/distro/minimal.conf
  #
  # We get the DISTRO_FEATURES defined in minimal.conf here but
  # however there are some features like mips -mplt support which
-# is not supported on uclibc yet so we need to disable that
-# feature for uclibc based distributions, therefore we redefine
-# the DISTRO_FEATURES for minimal-uclibc and notably leave mplt
+# is not supported on eglibc yet so we need to disable that
+# feature for eglibc based distributions, therefore we redefine
+# the DISTRO_FEATURES for minimal-eglibc and notably leave mplt
  # out. Make sure that if there is a new DISTRO_FEATURE thats added
-# to minimal.conf will not get included in minimal-uclibc.conf
+# to minimal.conf will not get included in minimal-eglibc.conf
  # it has to be added to the below selection if it should also be
-# enabled for minimal-uclibc
+# enabled for minimal-eglibc
 
  # FEATURE SELECTION
  #############################################################################
conf/distro/minimal.conf +0 -0
index 00397db..d0ec876 100644

conf/distro/minimal.conf OVERRIDES = "local:${MACHINE}:${MACHINE_CLASS}:${DISTRO}:${TARGET_OS}:${TARGET_A · line 89

Quoted 5 lines
conf/distro/minimal.conf +1 -1
@@ -86,7 +86,7 @@ OVERRIDES = "local:${MACHINE}:${MACHINE_CLASS}:${DISTRO}:${TARGET_OS}:${TARGET_A
  #############################################################################
  # TOOLCHAIN
  #############################################################################
-LIBC ?= "eglibc"
+LIBC ?= "glibc"

We have intentionally switched to use eglibc as default C library for minimal. As you can see its a weak assignment which means
you can still override it in you local.conf but the default is to stay as it is

Thanks

-Khem

#3 lore raw
In reply to Guo Hongruan
Quoted 2 lines · Guo Hongruan

1. conf/distro/minimal-eglibc.conf: add minimal distribution based on eglibc.
2. conf/distro/minimal.conf: use glibc instead of eglibc

What's the reason for this change? If eglibc is deficient in some way then I would prefer to either see it fixed, or just switch minimal back to using glibc generically. I am not sure that adding another distro variant for this is a good idea.

p.

#4 lore raw

No, it is not a bug. I just want to specify the libc type explicitly in the distribution name.

Quoted 17 lines · 在 Tue, 22 Dec 2009 17:25:49 +0800,Phil Blundell <[email protected]> 写道:
Quoted 2 lines · Guo Hongruan

1. conf/distro/minimal-eglibc.conf: add minimal distribution based on eglibc.
2. conf/distro/minimal.conf: use glibc instead of eglibc

What's the reason for this change? If eglibc is deficient in some way then I would prefer to either see it fixed, or just switch minimal back to using glibc generically. I am not sure that adding another distro variant for this is a good idea.

p.

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Signature · 5 lines
Guo Hongruan, Embedded Linux Consultant
Mobile: +86-0-13484056007
Skype: camelguo
Twitter: camelguo
http://www.gulessoft.com
#5 lore raw
Quoted 2 lines · Guo Hongruan

No, it is not a bug. I just want to specify the libc type explicitly in the distribution name.

This isn't what your patch does, though: it changes the "minimal" distro from eglibc to glibc. Are you saying that this isn't what you actually wanted to do?

p.

#6 lore raw
In reply to Guo Hongruan

Hello,

Quoted 2 lines · Guo Hongruan

1. conf/distro/minimal-eglibc.conf: add minimal distribution based on eglibc.
2. conf/distro/minimal.conf: use glibc instead of eglibc

NAK.

OE is not supposed to have a different distribution file name for each for the variants.

Regards,

Signature · 1 line
Leon
#7 lore raw

I reviewed the minimal-uclibc.conf. So I added the minimal-eglibc.conf. No, it is not a must.

Quoted 12 lines · 在 Wed, 23 Dec 2009 21:52:23 +0800,Leon Woestenberg…

Hello,

Quoted 2 lines · Guo Hongruan

1. conf/distro/minimal-eglibc.conf: add minimal distribution based on eglibc.
2. conf/distro/minimal.conf: use glibc instead of eglibc

NAK.

OE is not supposed to have a different distribution file name for each for the variants.

Regards,

Signature · 4 lines
Guo Hongruan, Embedded Linux Consultant
Skype: camelguo
Twitter: camelguo
http://www.gulessoft.com